xilinx-ppc.h: Drop
With PowerPC 4xx support removed, we have removed xilinx-ppc support as
well, remove this file now.
Fixes 98f705c9cefd ("powerpc: remove 4xx support")
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
deleted file mode 100644
index e8a0c1c..0000000
--- a/include/configs/xilinx-ppc.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
- * This work has been supported by: QTechnology http://qtec.com/
- *
- * (C) Copyright 2008
- * Georg Schardt <schardt@team-ctech.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#ifndef __CONFIG_XLX_H
-#define __CONFIG_XLX_H
-
-/*
-#define DEBUG
-#define ET_DEBUG
-*/
-
-/*Mem Map*/
-#define CONFIG_SYS_SDRAM_BASE 0x0
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-/*Cmd*/
-#define CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_MTDPARTS
-
-/*Misc*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
- /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
- /* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START 0x00400000
- /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00C00000
- /* 4 ... 12 MB in DRAM */
-#define CONFIG_SYS_LOAD_ADDR 0x00400000
- /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1
- /* Extended board_into (bd_t) */
- /* decrementer freq: 1 ms ticks */
-#define CONFIG_CMDLINE_EDITING /* add command line history */
-#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
-#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
-#define CONFIG_LOADS_ECHO /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
- /* Initial Memory map for Linux */
-
-/*Stack*/
-#define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
- - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-/*Speed*/
-#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
-
-/*Flash*/
-#ifdef XPAR_FLASH_MEM0_BASEADDR
-#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
-/* The following table includes the supported baudrates */
-# define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-#endif /* __CONFIG_H */