Merge branch 'master' of ../master
diff --git a/MAINTAINERS b/MAINTAINERS
index 1520312..e5ad0cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -428,6 +428,7 @@
sc3 PPC405GP
suen3 ARM926EJS (Kirkwood SoC)
uc101 MPC5200
+ ve8313 MPC8313
Peter De Schrijver <p2@mind.be>
@@ -490,6 +491,10 @@
JSE PPC405GPr
+Ilya Yanok <yanok@emcraft.com>
+
+ MPC8308RDB MPC8308
+
Roy Zang <tie-fei.zang@freescale.com>
mpc7448hpc2 MPC7448
@@ -871,9 +876,6 @@
PCI5441 Nios-II
PK1C20 Nios-II
- EP1C20 Nios-II
- EP1S10 Nios-II
- EP1S40 Nios-II
nios2-generic Nios-II
#########################################################################
@@ -1000,6 +1002,8 @@
BF548-EZKIT BF548
BF561-EZKIT BF561
+ BF527-AD7160-EVAL BF527
+
Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org>
Blackfin Team <u-boot-devel@blackfin.uclinux.org>
diff --git a/MAKEALL b/MAKEALL
index 2e98b6c..39b13e9 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -360,6 +360,7 @@
LIST_83xx=" \
caddy2 \
kmeter1 \
+ MPC8308RDB \
MPC8313ERDB_33 \
MPC8313ERDB_NAND_66 \
MPC8315ERDB \
@@ -380,6 +381,7 @@
sbc8349 \
SIMPC8313_LP \
TQM834x \
+ ve8313 \
vme8349 \
"
@@ -826,9 +828,6 @@
#########################################################################
LIST_nios2=" \
- EP1C20 \
- EP1S10 \
- EP1S40 \
PCI5441 \
PK1C20 \
nios2-generic \
@@ -894,6 +893,7 @@
LIST_blackfin=" \
bf518f-ezbrd \
bf526-ezbrd \
+ bf527-ad7160-eval \
bf527-ezkit \
bf527-ezkit-v2 \
bf533-ezkit \
diff --git a/Makefile b/Makefile
index 5780ee1..bba41cb 100644
--- a/Makefile
+++ b/Makefile
@@ -2443,7 +2443,6 @@
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
$(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
- $(obj)arch/blackfin/lib/u-boot.lds \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
index 6fc3902..c63e864 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@@ -378,10 +378,10 @@
}
#endif /* CONFIG_ARCH_MISC_INIT */
-#ifdef CONFIG_KIRKWOOD_EGIGA
+#ifdef CONFIG_MVGBE
int cpu_eth_init(bd_t *bis)
{
- kirkwood_egiga_initialize(bis);
+ mvgbe_initialize(bis);
return 0;
}
#endif
diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
index 03c6d06..f3c1e21 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
@@ -268,3 +268,11 @@
return 0;
}
#endif /* CONFIG_ARCH_MISC_INIT */
+
+#ifdef CONFIG_MVGBE
+int cpu_eth_init(bd_t *bis)
+{
+ mvgbe_initialize(bis);
+ return 0;
+}
+#endif
diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
index 2470efb..9edb0be 100644
--- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
+++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
@@ -60,6 +60,11 @@
#define KW_EGIGA0_BASE (KW_REGISTER(0x72000))
#define KW_EGIGA1_BASE (KW_REGISTER(0x76000))
+/* Kirkwood GbE controller has two ports */
+#define MAX_MVGBE_DEVS 2
+#define MVGBE0_BASE KW_EGIGA0_BASE
+#define MVGBE1_BASE KW_EGIGA1_BASE
+
#if defined (CONFIG_KW88F6281)
#include <asm/arch/kw88f6281.h>
#elif defined (CONFIG_KW88F6192)
diff --git a/arch/arm/include/asm/arch-orion5x/orion5x.h b/arch/arm/include/asm/arch-orion5x/orion5x.h
index 4008c84..d257b66 100644
--- a/arch/arm/include/asm/arch-orion5x/orion5x.h
+++ b/arch/arm/include/asm/arch-orion5x/orion5x.h
@@ -56,6 +56,10 @@
#define ORION5X_USB20_PORT1_BASE (ORION5X_REGISTER(0xA0000))
#define ORION5X_EGIGA_BASE (ORION5X_REGISTER(0x72000))
+/* Orion5x GbE controller has a single port */
+#define MAX_MVGBE_DEVS 1
+#define MVGBE0_BASE ORION5X_EGIGA_BASE
+
#define CONFIG_MAX_RAM_BANK_SIZE (64*1024*1024)
/* include here SoC variants. 5181, 5281, 6183 should go here when
diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile
index 211b8d5..b7f991d 100644
--- a/arch/blackfin/cpu/Makefile
+++ b/arch/blackfin/cpu/Makefile
@@ -17,7 +17,10 @@
CEXTRA := initcode.o
SEXTRA := start.o
SOBJS := interrupt.o cache.o
+COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o
+COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
COBJS-y += cpu.o
+COBJS-y += gpio.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o
COBJS-y += os_log.o
diff --git a/arch/blackfin/cpu/bootcount.c b/arch/blackfin/cpu/bootcount.c
new file mode 100644
index 0000000..6cf6dd5
--- /dev/null
+++ b/arch/blackfin/cpu/bootcount.c
@@ -0,0 +1,34 @@
+/*
+ * functions for handling bootcount support
+ *
+ * Copyright (c) 2010 Analog Devices Inc.
+ *
+ * Licensed under the 2-clause BSD.
+ */
+
+/* This version uses one 32bit storage and combines the magic/count */
+
+#include <common.h>
+
+/* We abuse the EVT0 MMR for bootcount storage by default */
+#ifndef CONFIG_SYS_BOOTCOUNT_ADDR
+# define CONFIG_SYS_BOOTCOUNT_ADDR EVT0
+#endif
+
+#define MAGIC_MASK 0xffff0000
+#define COUNT_MASK 0x0000ffff
+
+void bootcount_store(ulong cnt)
+{
+ ulong magic = (BOOTCOUNT_MAGIC & MAGIC_MASK) | (cnt & COUNT_MASK);
+ bfin_write32(CONFIG_SYS_BOOTCOUNT_ADDR, magic);
+}
+
+ulong bootcount_load(void)
+{
+ ulong magic = bfin_read32(CONFIG_SYS_BOOTCOUNT_ADDR);
+ if ((magic & MAGIC_MASK) == (BOOTCOUNT_MAGIC & MAGIC_MASK))
+ return magic & COUNT_MASK;
+ else
+ return 0;
+}
diff --git a/arch/blackfin/cpu/cmd_gpio.c b/arch/blackfin/cpu/cmd_gpio.c
new file mode 100644
index 0000000..9e505b6
--- /dev/null
+++ b/arch/blackfin/cpu/cmd_gpio.c
@@ -0,0 +1,120 @@
+/*
+ * Control GPIO pins on the fly
+ *
+ * Copyright (c) 2008-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <command.h>
+
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+
+enum {
+ GPIO_INPUT,
+ GPIO_SET,
+ GPIO_CLEAR,
+ GPIO_TOGGLE,
+};
+
+int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc == 2 && !strcmp(argv[1], "status")) {
+ bfin_gpio_labels();
+ return 0;
+ }
+
+ if (argc != 3) {
+ show_usage:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ /* parse the behavior */
+ ulong sub_cmd;
+ switch (argv[1][0]) {
+ case 'i': sub_cmd = GPIO_INPUT; break;
+ case 's': sub_cmd = GPIO_SET; break;
+ case 'c': sub_cmd = GPIO_CLEAR; break;
+ case 't': sub_cmd = GPIO_TOGGLE; break;
+ default: goto show_usage;
+ }
+
+ /* parse the pin with format: [p][port]<#> */
+ const char *str_pin = argv[2];
+
+ /* grab the [p]<port> portion */
+ ulong port_base;
+ if (*str_pin == 'p') ++str_pin;
+ switch (*str_pin) {
+#ifdef GPIO_PA0
+ case 'a': port_base = GPIO_PA0; break;
+#endif
+#ifdef GPIO_PB0
+ case 'b': port_base = GPIO_PB0; break;
+#endif
+#ifdef GPIO_PC0
+ case 'c': port_base = GPIO_PC0; break;
+#endif
+#ifdef GPIO_PD0
+ case 'd': port_base = GPIO_PD0; break;
+#endif
+#ifdef GPIO_PE0
+ case 'e': port_base = GPIO_PE0; break;
+#endif
+#ifdef GPIO_PF0
+ case 'f': port_base = GPIO_PF0; break;
+#endif
+#ifdef GPIO_PG0
+ case 'g': port_base = GPIO_PG0; break;
+#endif
+#ifdef GPIO_PH0
+ case 'h': port_base = GPIO_PH0; break;
+#endif
+#ifdef GPIO_PI0
+ case 'i': port_base = GPIO_PI0; break;
+#endif
+#ifdef GPIO_PJ
+ case 'j': port_base = GPIO_PJ0; break;
+#endif
+ default: goto show_usage;
+ }
+
+ /* grab the <#> portion */
+ ulong pin = simple_strtoul(str_pin + 1, NULL, 10);
+ if (pin > 15)
+ goto show_usage;
+
+ /* grab the pin before we tweak it */
+ ulong gpio = port_base + pin;
+ gpio_request(gpio, "cmd_gpio");
+
+ /* finally, let's do it: set direction and exec command */
+ if (sub_cmd == GPIO_INPUT) {
+ gpio_direction_input(gpio);
+ printf("gpio: pin %lu on port %c set to input\n", pin, *str_pin);
+ return 0;
+ }
+
+ ulong value;
+ switch (sub_cmd) {
+ case GPIO_SET: value = 1; break;
+ case GPIO_CLEAR: value = 0; break;
+ case GPIO_TOGGLE: value = !gpio_get_value(gpio); break;
+ default: goto show_usage;
+ }
+ gpio_direction_output(gpio, value);
+ printf("gpio: pin %lu on port %c (gpio %lu) value is %lu\n",
+ pin, *str_pin, gpio, value);
+
+ gpio_free(gpio);
+
+ return 0;
+}
+
+U_BOOT_CMD(gpio, 3, 0, do_gpio,
+ "set/clear/toggle gpio output pins",
+ "<set|clear|toggle> <port><pin>\n"
+ " - set/clear/toggle the specified pin (e.g. PF10)");
diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c
index 2c8fd86..18dbdf7 100644
--- a/arch/blackfin/cpu/cpu.c
+++ b/arch/blackfin/cpu/cpu.c
@@ -91,7 +91,9 @@
#else
bfin_write_SIC_IMASK(0);
#endif
- bfin_write_EVT2(evt_default); /* NMI */
+ /* Set up a dummy NMI handler if needed. */
+ if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS || ANOMALY_05000219)
+ bfin_write_EVT2(evt_nmi); /* NMI */
bfin_write_EVT5(evt_default); /* hardware error */
bfin_write_EVT6(evt_default); /* core timer */
bfin_write_EVT7(evt_default);
diff --git a/arch/blackfin/cpu/cpu.h b/arch/blackfin/cpu/cpu.h
index 0a13c28..ba85e0b 100644
--- a/arch/blackfin/cpu/cpu.h
+++ b/arch/blackfin/cpu/cpu.h
@@ -29,10 +29,12 @@
void board_reset(void) __attribute__((__weak__));
void bfin_reset_or_hang(void) __attribute__((__noreturn__));
+void bfin_dump(struct pt_regs *reg);
void bfin_panic(struct pt_regs *reg);
void dump(struct pt_regs *regs);
asmlinkage void trap(void);
+asmlinkage void evt_nmi(void);
asmlinkage void evt_default(void);
#endif
diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c
new file mode 100644
index 0000000..488ca11
--- /dev/null
+++ b/arch/blackfin/cpu/gpio.c
@@ -0,0 +1,854 @@
+/*
+ * GPIO Abstraction Layer
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+
+#if ANOMALY_05000311 || ANOMALY_05000323
+enum {
+ AWA_data = SYSCR,
+ AWA_data_clear = SYSCR,
+ AWA_data_set = SYSCR,
+ AWA_toggle = SYSCR,
+ AWA_maska = UART_SCR,
+ AWA_maska_clear = UART_SCR,
+ AWA_maska_set = UART_SCR,
+ AWA_maska_toggle = UART_SCR,
+ AWA_maskb = UART_GCTL,
+ AWA_maskb_clear = UART_GCTL,
+ AWA_maskb_set = UART_GCTL,
+ AWA_maskb_toggle = UART_GCTL,
+ AWA_dir = SPORT1_STAT,
+ AWA_polar = SPORT1_STAT,
+ AWA_edge = SPORT1_STAT,
+ AWA_both = SPORT1_STAT,
+#if ANOMALY_05000311
+ AWA_inen = TIMER_ENABLE,
+#elif ANOMALY_05000323
+ AWA_inen = DMA1_1_CONFIG,
+#endif
+};
+ /* Anomaly Workaround */
+#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
+#else
+#define AWA_DUMMY_READ(...) do { } while (0)
+#endif
+
+static struct gpio_port_t * const gpio_array[] = {
+#if defined(BF533_FAMILY)
+ (struct gpio_port_t *) FIO_FLAG_D,
+#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) \
+ || defined(BF538_FAMILY)
+ (struct gpio_port_t *) PORTFIO,
+# if !defined(BF538_FAMILY)
+ (struct gpio_port_t *) PORTGIO,
+ (struct gpio_port_t *) PORTHIO,
+# endif
+#elif defined(BF561_FAMILY)
+ (struct gpio_port_t *) FIO0_FLAG_D,
+ (struct gpio_port_t *) FIO1_FLAG_D,
+ (struct gpio_port_t *) FIO2_FLAG_D,
+#elif defined(CONFIG_BF54x)
+ (struct gpio_port_t *)PORTA_FER,
+ (struct gpio_port_t *)PORTB_FER,
+ (struct gpio_port_t *)PORTC_FER,
+ (struct gpio_port_t *)PORTD_FER,
+ (struct gpio_port_t *)PORTE_FER,
+ (struct gpio_port_t *)PORTF_FER,
+ (struct gpio_port_t *)PORTG_FER,
+ (struct gpio_port_t *)PORTH_FER,
+ (struct gpio_port_t *)PORTI_FER,
+ (struct gpio_port_t *)PORTJ_FER,
+#else
+# error no gpio arrays defined
+#endif
+};
+
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+static unsigned short * const port_fer[] = {
+ (unsigned short *) PORTF_FER,
+ (unsigned short *) PORTG_FER,
+ (unsigned short *) PORTH_FER,
+};
+
+# if !defined(BF537_FAMILY)
+static unsigned short * const port_mux[] = {
+ (unsigned short *) PORTF_MUX,
+ (unsigned short *) PORTG_MUX,
+ (unsigned short *) PORTH_MUX,
+};
+
+static const
+u8 pmux_offset[][16] = {
+# if defined(CONFIG_BF52x)
+ { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
+ { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
+# elif defined(CONFIG_BF51x)
+ { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
+ { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
+ { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
+# endif
+};
+# endif
+
+#elif defined(BF538_FAMILY)
+static unsigned short * const port_fer[] = {
+ (unsigned short *) PORTCIO_FER,
+ (unsigned short *) PORTDIO_FER,
+ (unsigned short *) PORTEIO_FER,
+};
+#endif
+
+#ifdef CONFIG_BFIN_GPIO_TRACK
+#define RESOURCE_LABEL_SIZE 16
+
+static struct str_ident {
+ char name[RESOURCE_LABEL_SIZE];
+} str_ident[MAX_RESOURCES];
+
+static void gpio_error(unsigned gpio)
+{
+ printf("bfin-gpio: GPIO %d wasn't requested!\n", gpio);
+}
+
+static void set_label(unsigned short ident, const char *label)
+{
+ if (label) {
+ strncpy(str_ident[ident].name, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label == NULL)
+ printf("bfin-gpio: please provide none-null label\n");
+
+ if (label)
+ return strcmp(str_ident[ident].name, label);
+ else
+ return -EINVAL;
+}
+
+#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)]
+#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
+#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i))
+#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i))
+#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
+#else
+#define is_reserved(m, i, e) (!(e))
+#define reserve(m, i)
+#define unreserve(m, i)
+#define DECLARE_RESERVED_MAP(m, c)
+#define gpio_error(gpio)
+#define set_label(...)
+#define get_label(...) ""
+#define cmp_label(...) 1
+#endif
+
+DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
+DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES));
+
+inline int check_gpio(unsigned gpio)
+{
+#if defined(CONFIG_BF54x)
+ if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
+ || gpio == GPIO_PH14 || gpio == GPIO_PH15
+ || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
+ return -EINVAL;
+#endif
+ if (gpio >= MAX_BLACKFIN_GPIOS)
+ return -EINVAL;
+ return 0;
+}
+
+static void port_setup(unsigned gpio, unsigned short usage)
+{
+#if defined(BF538_FAMILY)
+ /*
+ * BF538/9 Port C,D and E are special.
+ * Inverted PORT_FER polarity on CDE and no PORF_FER on F
+ * Regular PORT F GPIOs are handled here, CDE are exclusively
+ * managed by GPIOLIB
+ */
+
+ if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
+ return;
+
+ gpio -= MAX_BLACKFIN_GPIOS;
+
+ if (usage == GPIO_USAGE)
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ else
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ SSYNC();
+ return;
+#endif
+
+ if (check_gpio(gpio))
+ return;
+
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+ if (usage == GPIO_USAGE)
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ else
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ SSYNC();
+#elif defined(CONFIG_BF54x)
+ if (usage == GPIO_USAGE)
+ gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
+ SSYNC();
+#endif
+}
+
+#ifdef BF537_FAMILY
+static struct {
+ unsigned short res;
+ unsigned short offset;
+} port_mux_lut[] = {
+ {.res = P_PPI0_D13, .offset = 11},
+ {.res = P_PPI0_D14, .offset = 11},
+ {.res = P_PPI0_D15, .offset = 11},
+ {.res = P_SPORT1_TFS, .offset = 11},
+ {.res = P_SPORT1_TSCLK, .offset = 11},
+ {.res = P_SPORT1_DTPRI, .offset = 11},
+ {.res = P_PPI0_D10, .offset = 10},
+ {.res = P_PPI0_D11, .offset = 10},
+ {.res = P_PPI0_D12, .offset = 10},
+ {.res = P_SPORT1_RSCLK, .offset = 10},
+ {.res = P_SPORT1_RFS, .offset = 10},
+ {.res = P_SPORT1_DRPRI, .offset = 10},
+ {.res = P_PPI0_D8, .offset = 9},
+ {.res = P_PPI0_D9, .offset = 9},
+ {.res = P_SPORT1_DRSEC, .offset = 9},
+ {.res = P_SPORT1_DTSEC, .offset = 9},
+ {.res = P_TMR2, .offset = 8},
+ {.res = P_PPI0_FS3, .offset = 8},
+ {.res = P_TMR3, .offset = 7},
+ {.res = P_SPI0_SSEL4, .offset = 7},
+ {.res = P_TMR4, .offset = 6},
+ {.res = P_SPI0_SSEL5, .offset = 6},
+ {.res = P_TMR5, .offset = 5},
+ {.res = P_SPI0_SSEL6, .offset = 5},
+ {.res = P_UART1_RX, .offset = 4},
+ {.res = P_UART1_TX, .offset = 4},
+ {.res = P_TMR6, .offset = 4},
+ {.res = P_TMR7, .offset = 4},
+ {.res = P_UART0_RX, .offset = 3},
+ {.res = P_UART0_TX, .offset = 3},
+ {.res = P_DMAR0, .offset = 3},
+ {.res = P_DMAR1, .offset = 3},
+ {.res = P_SPORT0_DTSEC, .offset = 1},
+ {.res = P_SPORT0_DRSEC, .offset = 1},
+ {.res = P_CAN0_RX, .offset = 1},
+ {.res = P_CAN0_TX, .offset = 1},
+ {.res = P_SPI0_SSEL7, .offset = 1},
+ {.res = P_SPORT0_TFS, .offset = 0},
+ {.res = P_SPORT0_DTPRI, .offset = 0},
+ {.res = P_SPI0_SSEL2, .offset = 0},
+ {.res = P_SPI0_SSEL3, .offset = 0},
+};
+
+static void portmux_setup(unsigned short per)
+{
+ u16 y, offset, muxreg;
+ u16 function = P_FUNCT2MUX(per);
+
+ for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
+ if (port_mux_lut[y].res == per) {
+
+ /* SET PORTMUX REG */
+
+ offset = port_mux_lut[y].offset;
+ muxreg = bfin_read_PORT_MUX();
+
+ if (offset != 1)
+ muxreg &= ~(1 << offset);
+ else
+ muxreg &= ~(3 << 1);
+
+ muxreg |= (function << offset);
+ bfin_write_PORT_MUX(muxreg);
+ }
+ }
+}
+#elif defined(CONFIG_BF54x)
+inline void portmux_setup(unsigned short per)
+{
+ u32 pmux;
+ u16 ident = P_IDENT(per);
+ u16 function = P_FUNCT2MUX(per);
+
+ pmux = gpio_array[gpio_bank(ident)]->port_mux;
+
+ pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
+ pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
+
+ gpio_array[gpio_bank(ident)]->port_mux = pmux;
+}
+
+inline u16 get_portmux(unsigned short per)
+{
+ u32 pmux;
+ u16 ident = P_IDENT(per);
+
+ pmux = gpio_array[gpio_bank(ident)]->port_mux;
+
+ return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
+}
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+inline void portmux_setup(unsigned short per)
+{
+ u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
+ u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
+
+ pmux = *port_mux[gpio_bank(ident)];
+ pmux &= ~(3 << offset);
+ pmux |= (function & 3) << offset;
+ *port_mux[gpio_bank(ident)] = pmux;
+ SSYNC();
+}
+#else
+# define portmux_setup(...) do { } while (0)
+#endif
+
+#ifndef CONFIG_BF54x
+/***********************************************************
+*
+* FUNCTIONS: Blackfin General Purpose Ports Access Functions
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: These functions abstract direct register access
+* to Blackfin processor General Purpose
+* Ports Regsiters
+*
+* CAUTION: These functions do not belong to the GPIO Driver API
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+/* Set a specific bit */
+
+#define SET_GPIO(name) \
+void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
+{ \
+ unsigned long flags; \
+ local_irq_save(flags); \
+ if (arg) \
+ gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
+ else \
+ gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+}
+
+SET_GPIO(dir) /* set_gpio_dir() */
+SET_GPIO(inen) /* set_gpio_inen() */
+SET_GPIO(polar) /* set_gpio_polar() */
+SET_GPIO(edge) /* set_gpio_edge() */
+SET_GPIO(both) /* set_gpio_both() */
+
+
+#define SET_GPIO_SC(name) \
+void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
+{ \
+ unsigned long flags; \
+ if (ANOMALY_05000311 || ANOMALY_05000323) \
+ local_irq_save(flags); \
+ if (arg) \
+ gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+ else \
+ gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) { \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+ } \
+}
+
+SET_GPIO_SC(maska)
+SET_GPIO_SC(maskb)
+SET_GPIO_SC(data)
+
+void set_gpio_toggle(unsigned gpio)
+{
+ unsigned long flags;
+ if (ANOMALY_05000311 || ANOMALY_05000323)
+ local_irq_save(flags);
+ gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+ if (ANOMALY_05000311 || ANOMALY_05000323) {
+ AWA_DUMMY_READ(toggle);
+ local_irq_restore(flags);
+ }
+}
+
+/* Set current PORT date (16-bit word) */
+
+#define SET_GPIO_P(name) \
+void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
+{ \
+ unsigned long flags; \
+ if (ANOMALY_05000311 || ANOMALY_05000323) \
+ local_irq_save(flags); \
+ gpio_array[gpio_bank(gpio)]->name = arg; \
+ if (ANOMALY_05000311 || ANOMALY_05000323) { \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+ } \
+}
+
+SET_GPIO_P(data)
+SET_GPIO_P(dir)
+SET_GPIO_P(inen)
+SET_GPIO_P(polar)
+SET_GPIO_P(edge)
+SET_GPIO_P(both)
+SET_GPIO_P(maska)
+SET_GPIO_P(maskb)
+
+/* Get a specific bit */
+#define GET_GPIO(name) \
+unsigned short get_gpio_ ## name(unsigned gpio) \
+{ \
+ unsigned long flags; \
+ unsigned short ret; \
+ if (ANOMALY_05000311 || ANOMALY_05000323) \
+ local_irq_save(flags); \
+ ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) { \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+ } \
+ return ret; \
+}
+
+GET_GPIO(data)
+GET_GPIO(dir)
+GET_GPIO(inen)
+GET_GPIO(polar)
+GET_GPIO(edge)
+GET_GPIO(both)
+GET_GPIO(maska)
+GET_GPIO(maskb)
+
+/* Get current PORT date (16-bit word) */
+
+#define GET_GPIO_P(name) \
+unsigned short get_gpiop_ ## name(unsigned gpio) \
+{ \
+ unsigned long flags; \
+ unsigned short ret; \
+ if (ANOMALY_05000311 || ANOMALY_05000323) \
+ local_irq_save(flags); \
+ ret = (gpio_array[gpio_bank(gpio)]->name); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) { \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore(flags); \
+ } \
+ return ret; \
+}
+
+GET_GPIO_P(data)
+GET_GPIO_P(dir)
+GET_GPIO_P(inen)
+GET_GPIO_P(polar)
+GET_GPIO_P(edge)
+GET_GPIO_P(both)
+GET_GPIO_P(maska)
+GET_GPIO_P(maskb)
+
+#else /* CONFIG_BF54x */
+
+unsigned short get_gpio_dir(unsigned gpio)
+{
+ return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
+}
+
+#endif /* CONFIG_BF54x */
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin Peripheral Resource Allocation
+* and PortMux Setup
+*
+* INPUTS/OUTPUTS:
+* per Peripheral Identifier
+* label String
+*
+* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ BUG_ON(ident >= MAX_RESOURCES);
+
+ /* If a pin can be muxed as either GPIO or peripheral, make
+ * sure it is not already a GPIO pin when we request it.
+ */
+ if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
+ printf("%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __func__, ident, get_label(ident));
+ return -EBUSY;
+ }
+
+ if (unlikely(is_reserved(peri, ident, 1))) {
+
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+#ifdef CONFIG_BF54x
+ if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
+#else
+ if (!(per & P_MAYSHARE)) {
+#endif
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
+ printf("%s: Peripheral %d function %d is already reserved by %s !\n",
+ __func__, ident, P_FUNCT2MUX(per), get_label(ident));
+ return -EBUSY;
+ }
+ }
+
+ anyway:
+ reserve(peri, ident);
+
+ portmux_setup(per);
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ set_label(ident, label);
+
+ return 0;
+}
+
+int peripheral_request_list(const unsigned short per[], const char *label)
+{
+ u16 cnt;
+ int ret;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+
+ ret = peripheral_request(per[cnt], label);
+
+ if (ret < 0) {
+ for ( ; cnt > 0; cnt--)
+ peripheral_free(per[cnt - 1]);
+
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+void peripheral_free(unsigned short per)
+{
+ unsigned short ident = P_IDENT(per);
+
+ if (per & P_DONTCARE)
+ return;
+
+ if (!(per & P_DEFINED))
+ return;
+
+ if (unlikely(!is_reserved(peri, ident, 0)))
+ return;
+
+ if (!(per & P_MAYSHARE))
+ port_setup(ident, GPIO_USAGE);
+
+ unreserve(peri, ident);
+
+ set_label(ident, "free");
+}
+
+void peripheral_free_list(const unsigned short per[])
+{
+ u16 cnt;
+ for (cnt = 0; per[cnt] != 0; cnt++)
+ peripheral_free(per[cnt]);
+}
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS
+* label String
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int bfin_gpio_request(unsigned gpio, const char *label)
+{
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+
+ /*
+ * Allow that the identical GPIO can
+ * be requested from the same driver twice
+ * Do nothing and return -
+ */
+
+ if (cmp_label(gpio, label) == 0)
+ return 0;
+
+ if (unlikely(is_reserved(gpio, gpio, 1))) {
+ printf("bfin-gpio: GPIO %d is already reserved by %s !\n",
+ gpio, get_label(gpio));
+ return -EBUSY;
+ }
+ if (unlikely(is_reserved(peri, gpio, 1))) {
+ printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+ gpio, get_label(gpio));
+ return -EBUSY;
+ }
+#ifndef CONFIG_BF54x
+ else { /* Reset POLAR setting when acquiring a gpio for the first time */
+ set_gpio_polar(gpio, 0);
+ }
+#endif
+
+ reserve(gpio, gpio);
+ set_label(gpio, label);
+
+ port_setup(gpio, GPIO_USAGE);
+
+ return 0;
+}
+
+void bfin_gpio_free(unsigned gpio)
+{
+ if (check_gpio(gpio) < 0)
+ return;
+
+ if (unlikely(!is_reserved(gpio, gpio, 0))) {
+ gpio_error(gpio);
+ return;
+ }
+
+ unreserve(gpio, gpio);
+
+ set_label(gpio, "free");
+}
+
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
+
+int bfin_special_gpio_request(unsigned gpio, const char *label)
+{
+ /*
+ * Allow that the identical GPIO can
+ * be requested from the same driver twice
+ * Do nothing and return -
+ */
+
+ if (cmp_label(gpio, label) == 0)
+ return 0;
+
+ if (unlikely(is_reserved(special_gpio, gpio, 1))) {
+ printf("bfin-gpio: GPIO %d is already reserved by %s !\n",
+ gpio, get_label(gpio));
+ return -EBUSY;
+ }
+ if (unlikely(is_reserved(peri, gpio, 1))) {
+ printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+ gpio, get_label(gpio));
+
+ return -EBUSY;
+ }
+
+ reserve(special_gpio, gpio);
+ reserve(peri, gpio);
+
+ set_label(gpio, label);
+ port_setup(gpio, GPIO_USAGE);
+
+ return 0;
+}
+
+void bfin_special_gpio_free(unsigned gpio)
+{
+ if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
+ gpio_error(gpio);
+ return;
+ }
+
+ reserve(special_gpio, gpio);
+ reserve(peri, gpio);
+ set_label(gpio, "free");
+}
+#endif
+
+static inline void __bfin_gpio_direction_input(unsigned gpio)
+{
+#ifdef CONFIG_BF54x
+ gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
+#else
+ gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
+#endif
+ gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+}
+
+int bfin_gpio_direction_input(unsigned gpio)
+{
+ unsigned long flags;
+
+ if (!is_reserved(gpio, gpio, 0)) {
+ gpio_error(gpio);
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+ __bfin_gpio_direction_input(gpio);
+ AWA_DUMMY_READ(inen);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+void bfin_gpio_toggle_value(unsigned gpio)
+{
+#ifdef CONFIG_BF54x
+ gpio_set_value(gpio, !gpio_get_value(gpio));
+#else
+ gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+#endif
+}
+
+void bfin_gpio_set_value(unsigned gpio, int arg)
+{
+ if (arg)
+ gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+}
+
+int bfin_gpio_direction_output(unsigned gpio, int value)
+{
+ unsigned long flags;
+
+ if (!is_reserved(gpio, gpio, 0)) {
+ gpio_error(gpio);
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+
+ gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+ gpio_set_value(gpio, value);
+#ifdef CONFIG_BF54x
+ gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
+#else
+ gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+#endif
+
+ AWA_DUMMY_READ(dir);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int bfin_gpio_get_value(unsigned gpio)
+{
+#ifdef CONFIG_BF54x
+ return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
+#else
+ unsigned long flags;
+
+ if (unlikely(get_gpio_edge(gpio))) {
+ int ret;
+ local_irq_save(flags);
+ set_gpio_edge(gpio, 0);
+ ret = get_gpio_data(gpio);
+ set_gpio_edge(gpio, 1);
+ local_irq_restore(flags);
+ return ret;
+ } else
+ return get_gpio_data(gpio);
+#endif
+}
+
+/* If we are booting from SPI and our board lacks a strong enough pull up,
+ * the core can reset and execute the bootrom faster than the resistor can
+ * pull the signal logically high. To work around this (common) error in
+ * board design, we explicitly set the pin back to GPIO mode, force /CS
+ * high, and wait for the electrons to do their thing.
+ *
+ * This function only makes sense to be called from reset code, but it
+ * lives here as we need to force all the GPIO states w/out going through
+ * BUG() checks and such.
+ */
+void bfin_reset_boot_spi_cs(unsigned short pin)
+{
+ unsigned short gpio = P_IDENT(pin);
+ port_setup(gpio, GPIO_USAGE);
+ gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ AWA_DUMMY_READ(data_set);
+ udelay(1);
+}
+
+#ifdef CONFIG_BFIN_GPIO_TRACK
+void bfin_gpio_labels(void)
+{
+ int c, gpio;
+
+ for (c = 0; c < MAX_RESOURCES; c++) {
+ gpio = is_reserved(gpio, c, 1);
+ if (!check_gpio(c) && gpio)
+ printf("GPIO_%d:\t%s\tGPIO %s\n", c,
+ get_label(c),
+ get_gpio_dir(c) ? "OUTPUT" : "INPUT");
+ else if (is_reserved(peri, c, 1))
+ printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c));
+ else
+ continue;
+ }
+}
+#endif
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
index 5f80ad6..007f5ce 100644
--- a/arch/blackfin/cpu/initcode.c
+++ b/arch/blackfin/cpu/initcode.c
@@ -101,6 +101,28 @@
continue;
}
+__attribute__((always_inline)) static inline void
+program_nmi_handler(void)
+{
+ u32 tmp1, tmp2;
+
+ /* Older bootroms don't create a dummy NMI handler,
+ * so make one ourselves ASAP in case it fires.
+ */
+ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS && !ANOMALY_05000219)
+ return;
+
+ asm volatile (
+ "%0 = RETS;" /* Save current RETS */
+ "CALL 1f;" /* Figure out current PC */
+ "RTN;" /* The simple NMI handler */
+ "1:"
+ "%1 = RETS;" /* Load addr of NMI handler */
+ "RETS = %0;" /* Restore RETS */
+ "[%2] = %1;" /* Write NMI handler */
+ : "=r"(tmp1), "=r"(tmp2) : "ab"(EVT2)
+ );
+}
/* Max SCLK can be 133MHz ... dividing that by (2*4) gives
* us a freq of 16MHz for SPI which should generally be
@@ -640,6 +662,9 @@
{
ADI_BOOT_DATA bootstruct_scratch;
+ /* Setup NMI handler before anything else */
+ program_nmi_handler();
+
serial_init();
serial_putc('A');
@@ -675,7 +700,12 @@
#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
serial_putc('I');
- /* tell the bootrom where our entry point is */
+ /* Tell the bootrom where our entry point is so that it knows
+ * where to jump to when finishing processing the LDR. This
+ * allows us to avoid small jump blocks in the LDR, and also
+ * works around anomaly 05000389 (init address in external
+ * memory causes bootrom to trigger external addressing IVHW).
+ */
if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS)
bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE);
#endif
diff --git a/arch/blackfin/cpu/interrupt.S b/arch/blackfin/cpu/interrupt.S
index 69bba3f..0e5e59e 100644
--- a/arch/blackfin/cpu/interrupt.S
+++ b/arch/blackfin/cpu/interrupt.S
@@ -150,3 +150,8 @@
RESTORE_ALL_SYS
rti;
ENDPROC(_evt_default)
+
+/* NMI handler */
+ENTRY(_evt_nmi)
+ rtn;
+ENDPROC(_evt_nmi)
diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h
index 5f9be86..f9e311f 100644
--- a/arch/blackfin/cpu/serial.h
+++ b/arch/blackfin/cpu/serial.h
@@ -26,6 +26,8 @@
#ifndef __ASSEMBLY__
+#include <asm/portmux.h>
+
#define LOB(x) ((x) & 0xFF)
#define HIB(x) (((x) >> 8) & 0xFF)
@@ -103,6 +105,23 @@
__attribute__((always_inline))
static inline void serial_do_portmux(void)
{
+ if (!BFIN_DEBUG_EARLY_SERIAL) {
+ const unsigned short pins[] = {
+#if CONFIG_UART_CONSOLE == 0
+ P_UART0_TX, P_UART0_RX,
+#elif CONFIG_UART_CONSOLE == 1
+ P_UART1_TX, P_UART1_RX,
+#elif CONFIG_UART_CONSOLE == 2
+ P_UART2_TX, P_UART2_RX,
+#elif CONFIG_UART_CONSOLE == 3
+ P_UART3_TX, P_UART3_RX,
+#endif
+ 0,
+ };
+ peripheral_request_list(pins, "bfin-uart");
+ return;
+ }
+
#if defined(__ADSPBF51x__)
# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \
bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \
diff --git a/arch/blackfin/cpu/traps.c b/arch/blackfin/cpu/traps.c
index caaea94..09388aa 100644
--- a/arch/blackfin/cpu/traps.c
+++ b/arch/blackfin/cpu/traps.c
@@ -29,14 +29,26 @@
#include <asm/deferred.h>
#include "cpu.h"
+#ifdef CONFIG_DEBUG_DUMP
+# define ENABLE_DUMP 1
+#else
+# define ENABLE_DUMP 0
+#endif
+
#define trace_buffer_save(x) \
do { \
+ if (!ENABLE_DUMP) \
+ break; \
(x) = bfin_read_TBUFCTL(); \
bfin_write_TBUFCTL((x) & ~TBUFEN); \
} while (0)
#define trace_buffer_restore(x) \
- bfin_write_TBUFCTL((x))
+ do { \
+ if (!ENABLE_DUMP) \
+ break; \
+ bfin_write_TBUFCTL((x)); \
+ } while (0);
/* The purpose of this map is to provide a mapping of address<->cplb settings
* rather than an exact map of what is actually addressable on the part. This
@@ -82,8 +94,16 @@
{
uint32_t ret = 0;
uint32_t trapnr = (regs->seqstat & EXCAUSE);
+ unsigned long tflags;
bool data = false;
+ /*
+ * Keep the trace buffer so that a miss here points people
+ * to the right place (their code). Crashes here rarely
+ * happen. If they do, only the Blackfin maintainer cares.
+ */
+ trace_buffer_save(tflags);
+
switch (trapnr) {
/* 0x26 - Data CPLB Miss */
case VEC_CPLB_M:
@@ -97,7 +117,7 @@
*/
if (last_cplb_fault_retx != regs->retx) {
last_cplb_fault_retx = regs->retx;
- return ret;
+ break;
}
}
@@ -110,7 +130,6 @@
uint32_t new_cplb_addr = 0, new_cplb_data = 0;
static size_t last_evicted;
size_t i;
- unsigned long tflags;
#ifdef CONFIG_EXCEPTION_DEFER
/* This should never happen */
@@ -118,13 +137,6 @@
bfin_panic(regs);
#endif
- /*
- * Keep the trace buffer so that a miss here points people
- * to the right place (their code). Crashes here rarely
- * happen. If they do, only the Blackfin maintainer cares.
- */
- trace_buffer_save(tflags);
-
new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1);
for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) {
@@ -180,7 +192,6 @@
for (i = 0; i < 16; ++i)
debug("%2i 0x%p 0x%08X\n", i, *CPLB_ADDR++, *CPLB_DATA++);
- trace_buffer_restore(tflags);
break;
}
#ifdef CONFIG_CMD_KGDB
@@ -208,23 +219,21 @@
#ifdef CONFIG_CMD_KGDB
if (level == 3) {
/* We need to handle this at EVT5, so try again */
+ bfin_dump(regs);
ret = 1;
break;
}
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return 0;
+ break;
#endif
bfin_panic(regs);
}
+
+ trace_buffer_restore(tflags);
+
return ret;
}
-#ifdef CONFIG_DEBUG_DUMP
-# define ENABLE_DUMP 1
-#else
-# define ENABLE_DUMP 0
-#endif
-
#ifndef CONFIG_KALLSYMS
const char *symbol_lookup(unsigned long addr, unsigned long *caddr)
{
@@ -364,17 +373,14 @@
printf("\n");
}
-void dump_bfin_trace_buffer(void)
+static void _dump_bfin_trace_buffer(void)
{
char buf[150];
- unsigned long tflags;
int i = 0;
if (!ENABLE_DUMP)
return;
- trace_buffer_save(tflags);
-
printf("Hardware Trace:\n");
if (bfin_read_TBUFSTAT() & TBUFCNT) {
@@ -385,16 +391,21 @@
printf(" Source : %s\n", buf);
}
}
+}
+void dump_bfin_trace_buffer(void)
+{
+ unsigned long tflags;
+ trace_buffer_save(tflags);
+ _dump_bfin_trace_buffer();
trace_buffer_restore(tflags);
}
-void bfin_panic(struct pt_regs *regs)
+void bfin_dump(struct pt_regs *regs)
{
- if (ENABLE_DUMP) {
- unsigned long tflags;
- trace_buffer_save(tflags);
- }
+ unsigned long tflags;
+
+ trace_buffer_save(tflags);
puts(
"\n"
@@ -404,7 +415,16 @@
"\n"
);
dump(regs);
- dump_bfin_trace_buffer();
+ _dump_bfin_trace_buffer();
puts("\n");
+
+ trace_buffer_restore(tflags);
+}
+
+void bfin_panic(struct pt_regs *regs)
+{
+ unsigned long tflags;
+ trace_buffer_save(tflags);
+ bfin_dump(regs);
bfin_reset_or_hang();
}
diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h
index 3fd34b3..48f793a 100644
--- a/arch/blackfin/include/asm/blackfin_local.h
+++ b/arch/blackfin/include/asm/blackfin_local.h
@@ -75,7 +75,15 @@
* regions can only be accessed via DMA, so if the address in question is in
* that region, make sure we attempt to DMA indirectly.
*/
-# define addr_bfin_on_chip_mem(addr) (((unsigned long)(addr) & 0xFFF00000) == 0xFFA00000)
+# ifdef __ADSPBF561__
+ /* Core B regions all need dma from Core A */
+# define addr_bfin_on_chip_mem(addr) \
+ ((((unsigned long)(addr) & 0xFFF00000) == 0xFFA00000) || \
+ (((unsigned long)(addr) & 0xFFC00000) == 0xFF400000))
+# else
+# define addr_bfin_on_chip_mem(addr) \
+ (((unsigned long)(addr) & 0xFFF00000) == 0xFFA00000)
+# endif
# include <asm/system.h>
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
new file mode 100644
index 0000000..b650ef0
--- /dev/null
+++ b/arch/blackfin/include/asm/gpio.h
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ARCH_BLACKFIN_GPIO_H__
+#define __ARCH_BLACKFIN_GPIO_H__
+
+#define gpio_bank(x) ((x) >> 4)
+#define gpio_bit(x) (1<<((x) & 0xF))
+#define gpio_sub_n(x) ((x) & 0xF)
+
+#define GPIO_BANKSIZE 16
+#define GPIO_BANK_NUM DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE)
+
+#define GPIO_0 0
+#define GPIO_1 1
+#define GPIO_2 2
+#define GPIO_3 3
+#define GPIO_4 4
+#define GPIO_5 5
+#define GPIO_6 6
+#define GPIO_7 7
+#define GPIO_8 8
+#define GPIO_9 9
+#define GPIO_10 10
+#define GPIO_11 11
+#define GPIO_12 12
+#define GPIO_13 13
+#define GPIO_14 14
+#define GPIO_15 15
+#define GPIO_16 16
+#define GPIO_17 17
+#define GPIO_18 18
+#define GPIO_19 19
+#define GPIO_20 20
+#define GPIO_21 21
+#define GPIO_22 22
+#define GPIO_23 23
+#define GPIO_24 24
+#define GPIO_25 25
+#define GPIO_26 26
+#define GPIO_27 27
+#define GPIO_28 28
+#define GPIO_29 29
+#define GPIO_30 30
+#define GPIO_31 31
+#define GPIO_32 32
+#define GPIO_33 33
+#define GPIO_34 34
+#define GPIO_35 35
+#define GPIO_36 36
+#define GPIO_37 37
+#define GPIO_38 38
+#define GPIO_39 39
+#define GPIO_40 40
+#define GPIO_41 41
+#define GPIO_42 42
+#define GPIO_43 43
+#define GPIO_44 44
+#define GPIO_45 45
+#define GPIO_46 46
+#define GPIO_47 47
+
+#define PERIPHERAL_USAGE 1
+#define GPIO_USAGE 0
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_BF54x
+void set_gpio_dir(unsigned, unsigned short);
+void set_gpio_inen(unsigned, unsigned short);
+void set_gpio_polar(unsigned, unsigned short);
+void set_gpio_edge(unsigned, unsigned short);
+void set_gpio_both(unsigned, unsigned short);
+void set_gpio_data(unsigned, unsigned short);
+void set_gpio_maska(unsigned, unsigned short);
+void set_gpio_maskb(unsigned, unsigned short);
+void set_gpio_toggle(unsigned);
+void set_gpiop_dir(unsigned, unsigned short);
+void set_gpiop_inen(unsigned, unsigned short);
+void set_gpiop_polar(unsigned, unsigned short);
+void set_gpiop_edge(unsigned, unsigned short);
+void set_gpiop_both(unsigned, unsigned short);
+void set_gpiop_data(unsigned, unsigned short);
+void set_gpiop_maska(unsigned, unsigned short);
+void set_gpiop_maskb(unsigned, unsigned short);
+unsigned short get_gpio_dir(unsigned);
+unsigned short get_gpio_inen(unsigned);
+unsigned short get_gpio_polar(unsigned);
+unsigned short get_gpio_edge(unsigned);
+unsigned short get_gpio_both(unsigned);
+unsigned short get_gpio_maska(unsigned);
+unsigned short get_gpio_maskb(unsigned);
+unsigned short get_gpio_data(unsigned);
+unsigned short get_gpiop_dir(unsigned);
+unsigned short get_gpiop_inen(unsigned);
+unsigned short get_gpiop_polar(unsigned);
+unsigned short get_gpiop_edge(unsigned);
+unsigned short get_gpiop_both(unsigned);
+unsigned short get_gpiop_maska(unsigned);
+unsigned short get_gpiop_maskb(unsigned);
+unsigned short get_gpiop_data(unsigned);
+
+struct gpio_port_t {
+ unsigned short data;
+ unsigned short dummy1;
+ unsigned short data_clear;
+ unsigned short dummy2;
+ unsigned short data_set;
+ unsigned short dummy3;
+ unsigned short toggle;
+ unsigned short dummy4;
+ unsigned short maska;
+ unsigned short dummy5;
+ unsigned short maska_clear;
+ unsigned short dummy6;
+ unsigned short maska_set;
+ unsigned short dummy7;
+ unsigned short maska_toggle;
+ unsigned short dummy8;
+ unsigned short maskb;
+ unsigned short dummy9;
+ unsigned short maskb_clear;
+ unsigned short dummy10;
+ unsigned short maskb_set;
+ unsigned short dummy11;
+ unsigned short maskb_toggle;
+ unsigned short dummy12;
+ unsigned short dir;
+ unsigned short dummy13;
+ unsigned short polar;
+ unsigned short dummy14;
+ unsigned short edge;
+ unsigned short dummy15;
+ unsigned short both;
+ unsigned short dummy16;
+ unsigned short inen;
+};
+#endif
+
+#ifdef CONFIG_BFIN_GPIO_TRACK
+void bfin_gpio_labels(void);
+#else
+#define bfin_gpio_labels()
+#define bfin_gpio_request(gpio, label) bfin_gpio_request(gpio)
+#define bfin_special_gpio_request(gpio, label) bfin_special_gpio_request(gpio)
+#endif
+
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+void bfin_special_gpio_free(unsigned gpio);
+int bfin_special_gpio_request(unsigned gpio, const char *label);
+#endif
+
+int bfin_gpio_request(unsigned gpio, const char *label);
+void bfin_gpio_free(unsigned gpio);
+int bfin_gpio_direction_input(unsigned gpio);
+int bfin_gpio_direction_output(unsigned gpio, int value);
+int bfin_gpio_get_value(unsigned gpio);
+void bfin_gpio_set_value(unsigned gpio, int value);
+void bfin_gpio_toggle_value(unsigned gpio);
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return bfin_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ return bfin_gpio_free(gpio);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return bfin_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return bfin_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return bfin_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ return bfin_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_is_valid(int number)
+{
+ return number >= 0 && number < MAX_BLACKFIN_GPIOS;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/arch/blackfin/include/asm/mach-bf527/anomaly.h b/arch/blackfin/include/asm/mach-bf527/anomaly.h
index 0fd7e31..9358afa 100644
--- a/arch/blackfin/include/asm/mach-bf527/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf527/anomaly.h
@@ -1,19 +1,28 @@
/*
- * File: include/asm-blackfin/mach-bf527/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2010 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
- * - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List
- * - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
+ * - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List
+ * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
+/* We do not support old silicon - sorry */
+#if __SILICON_REVISION__ < 0
+# error will not work on BF526/BF527 silicon version
+#endif
+
#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
# define ANOMALY_BF526 1
#else
@@ -25,10 +34,14 @@
# define ANOMALY_BF527 0
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
+#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
+#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */
+#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -40,167 +53,226 @@
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
-#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
/* Host DMA Boot Modes Are Not Functional */
#define ANOMALY_05000330 (__SILICON_REVISION__ < 2)
/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
/* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
/* USB Calibration Value to use */
#define ANOMALY_05000346_value 0xE510
/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
/* Security Features Are Not Functional */
-#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1)
+#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
-#define ANOMALY_05000353 (ANOMALY_BF526)
+#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
/* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1)
+#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
#define ANOMALY_05000366 (1)
/* Incorrect Default CSEL Value in PLL_DIV */
-#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
/* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
/* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
/* 8-Bit NAND Flash Boot Mode Not Functional */
-#define ANOMALY_05000382 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Boot from OTP Memory Not Functional */
-#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
/* bfrom_SysControl() Firmware Routine Not Functional */
-#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
/* Programmable Preboot Settings Not Functional */
-#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
/* CRC32 Checksum Support Not Functional */
-#define ANOMALY_05000388 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
/* Log Buffer Not Functional */
-#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
/* Hook Routine Not Functional */
-#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
/* Header Indirect Bit Not Functional */
-#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
-#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
-#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
-#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Lockbox SESR Disallows Certain User Interrupts */
-#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
#define ANOMALY_05000405 (1)
/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
-#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
#define ANOMALY_05000408 (1)
/* Lockbox firmware leaves MDMA0 channel enabled */
-#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Incorrect Default Internal Voltage Regulator Setting */
-#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
-#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2))
/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
-#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
/* DEB2_URGENT Bit Not Functional */
-#define ANOMALY_05000415 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Speculative Fetches Can Cause Undesired External FIFO Operations */
#define ANOMALY_05000416 (1)
/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
-#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
-#define ANOMALY_05000418 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
-#define ANOMALY_05000420 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
#define ANOMALY_05000421 (1)
/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
-#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
-#define ANOMALY_05000423 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Internal Voltage Regulator Not Trimmed */
-#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
-#define ANOMALY_05000425 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
#define ANOMALY_05000426 (1)
/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
-#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
/* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
#define ANOMALY_05000431 (1)
/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
-#define ANOMALY_05000432 (ANOMALY_BF526)
+#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527)
+#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
/* Preboot Cannot be Used to Alter the PLL_DIV Register */
-#define ANOMALY_05000439 (1)
+#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
-#define ANOMALY_05000440 (1)
+#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
/* OTP Write Accesses Not Supported */
-#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
/* The WURESET Bit in the SYSCR Register is not Functional */
#define ANOMALY_05000445 (1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
#define ANOMALY_05000451 (1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
-#define ANOMALY_05000452 (1)
+#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
#define ANOMALY_05000456 (1)
/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
#define ANOMALY_05000457 (1)
+/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
+#define ANOMALY_05000460 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
+#define ANOMALY_05000466 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
+/* PLL Latches Incorrect Settings During Reset */
+#define ANOMALY_05000469 (1)
+/* Incorrect Default MSEL Value in PLL_CTL */
+#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0))
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3))
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
#define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
+#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
#define ANOMALY_05000285 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
+#define ANOMALY_05000474 (0)
#endif
diff --git a/arch/blackfin/include/asm/mach-bf527/def_local.h b/arch/blackfin/include/asm/mach-bf527/def_local.h
index 81eca83..1ffa239 100644
--- a/arch/blackfin/include/asm/mach-bf527/def_local.h
+++ b/arch/blackfin/include/asm/mach-bf527/def_local.h
@@ -1,2 +1,6 @@
+#include "gpio.h"
#include "mem_map.h"
+#include "portmux.h"
#include "ports.h"
+
+#define CONFIG_BF52x 1 /* Linux glue */
diff --git a/arch/blackfin/include/asm/mach-bf527/gpio.h b/arch/blackfin/include/asm/mach-bf527/gpio.h
new file mode 100644
index 0000000..f80c299
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf527/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+#define GPIO_PG0 16
+#define GPIO_PG1 17
+#define GPIO_PG2 18
+#define GPIO_PG3 19
+#define GPIO_PG4 20
+#define GPIO_PG5 21
+#define GPIO_PG6 22
+#define GPIO_PG7 23
+#define GPIO_PG8 24
+#define GPIO_PG9 25
+#define GPIO_PG10 26
+#define GPIO_PG11 27
+#define GPIO_PG12 28
+#define GPIO_PG13 29
+#define GPIO_PG14 30
+#define GPIO_PG15 31
+#define GPIO_PH0 32
+#define GPIO_PH1 33
+#define GPIO_PH2 34
+#define GPIO_PH3 35
+#define GPIO_PH4 36
+#define GPIO_PH5 37
+#define GPIO_PH6 38
+#define GPIO_PH7 39
+#define GPIO_PH8 40
+#define GPIO_PH9 41
+#define GPIO_PH10 42
+#define GPIO_PH11 43
+#define GPIO_PH12 44
+#define GPIO_PH13 45
+#define GPIO_PH14 46
+#define GPIO_PH15 47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf527/portmux.h b/arch/blackfin/include/asm/mach-bf527/portmux.h
new file mode 100644
index 0000000..aa16558
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf527/portmux.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+
+#if !defined(CONFIG_BF527_SPORT0_PORTG)
+#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#else
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#if !defined(CONFIG_BF527_SPORT0_TSCLK_PG14)
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#else
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#endif
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#endif
+
+#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2))
+#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2))
+
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2))
+
+#if !defined(CONFIG_BF527_UART1_PORTG)
+#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2))
+#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2))
+#else
+#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#endif
+
+#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(3))
+#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(3))
+#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(3))
+
+#define P_HWAIT (P_DONTCARE)
+
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG1
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
+#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
+#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
+#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2))
+#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+/* #define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) */
+#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_MDC (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_RMII0_MDINT (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2))
+
+#define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
+#define P_HOST_ACK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
+#define P_HOST_ADDR (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
+#define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2))
+#define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
+
+#if defined(CONFIG_BF527_NAND_D_PORTF)
+#define P_NAND_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2))
+#define P_NAND_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2))
+#define P_NAND_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2))
+#define P_NAND_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2))
+#define P_NAND_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2))
+#define P_NAND_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2))
+#define P_NAND_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2))
+#define P_NAND_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2))
+#else /*if defined(CONFIG_BF527_NAND_D_PORTH)*/
+#define P_NAND_D0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_NAND_D1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_NAND_D2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_NAND_D3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_NAND_D4 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_NAND_D5 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_NAND_D6 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_NAND_D7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#endif
+
+#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_NAND_CE (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_NAND_WE (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_NAND_RE (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_NAND_RB (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_NAND_CLE (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
+#define P_NAND_ALE (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
+
+#define P_HOST_D0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2))
+#define P_HOST_D1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2))
+#define P_HOST_D2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_HOST_D3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_HOST_D4 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+#define P_HOST_D5 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(2))
+#define P_HOST_D6 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2))
+#define P_HOST_D7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2))
+#define P_HOST_D8 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2))
+#define P_HOST_D9 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(2))
+#define P_HOST_D10 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(2))
+#define P_HOST_D11 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(2))
+#define P_HOST_D12 (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(2))
+#define P_HOST_D13 (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(2))
+#define P_HOST_D14 (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(2))
+#define P_HOST_D15 (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(2))
+
+#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1))
+#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(1))
+#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(1))
+#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
+#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(1))
+#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(1))
+#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(1))
+#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(1))
+#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(1))
+#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_RMII0_REF_CLK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_RMII0_CRS_DV (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_MDIO (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+
+#define P_TWI0_SCL (P_DONTCARE)
+#define P_TWI0_SDA (P_DONTCARE)
+#define P_PPI0_FS1 (P_DONTCARE)
+#define P_TMR0 (P_DONTCARE)
+#define P_TMRCLK (P_DONTCARE)
+#define P_PPI0_CLK (P_DONTCARE)
+
+#define P_MII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxD2, \
+ P_MII0_ETxD3, \
+ P_MII0_ETxEN, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_COL, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxD2, \
+ P_MII0_ERxD3, \
+ P_MII0_ERxDV, \
+ P_MII0_ERxCLK, \
+ P_MII0_ERxER, \
+ P_MII0_CRS, \
+ P_MDC, \
+ P_MDIO, 0}
+
+#define P_RMII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxEN, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxER, \
+ P_RMII0_REF_CLK, \
+ P_RMII0_MDINT, \
+ P_RMII0_CRS_DV, \
+ P_MDC, \
+ P_MDIO, 0}
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf533/anomaly.h b/arch/blackfin/include/asm/mach-bf533/anomaly.h
index c98747f..78f8721 100644
--- a/arch/blackfin/include/asm/mach-bf533/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf533/anomaly.h
@@ -1,9 +1,13 @@
/*
- * File: include/asm-blackfin/mach-bf533/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2010 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
@@ -34,7 +38,7 @@
# define ANOMALY_BF533 0
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
@@ -46,7 +50,7 @@
#define ANOMALY_05000122 (1)
/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
#define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
#define ANOMALY_05000166 (1)
/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
#define ANOMALY_05000167 (1)
@@ -56,13 +60,13 @@
#define ANOMALY_05000180 (1)
/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
#define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
-/* False Protection Exceptions */
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
#define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
#define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
/* Restarting SPORT in Specific Modes May Cause Data Corruption */
#define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
-/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
/* Current DMA Address Shows Wrong Value During Carry Fix */
#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
@@ -74,7 +78,7 @@
#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
/* Specific Sequence That Can Cause DMA Error or DMA Stopping */
#define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
-/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
/* Recovery from "Brown-Out" Condition */
#define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
@@ -106,7 +110,7 @@
#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
-/* Data CPLBs Should Prevent Spurious Hardware Errors */
+/* Data CPLBs Should Prevent False Hardware Errors */
#define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
#define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
@@ -148,21 +152,21 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
-/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
+/* ALT_TIMING Bit in PPI_CONTROL Register Is Not Functional */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (1) /* note: brokenness is noted in documentation, not anomaly sheet */
@@ -170,11 +174,11 @@
#define ANOMALY_05000310 (1)
/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
#define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
#define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
@@ -200,6 +204,18 @@
#define ANOMALY_05000426 (1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
@@ -213,17 +229,17 @@
#define ANOMALY_05000070 (__SILICON_REVISION__ < 2)
/* Writing FIO_DIR can corrupt a programmable flag's data */
#define ANOMALY_05000079 (__SILICON_REVISION__ < 2)
-/* Timer Auto-Baud Mode requires the UART clock to be enabled */
+/* Timer Auto-Baud Mode requires the UART clock to be enabled. */
#define ANOMALY_05000086 (__SILICON_REVISION__ < 2)
/* Internal Clocking Modes on SPORT0 not supported */
#define ANOMALY_05000088 (__SILICON_REVISION__ < 2)
/* Internal voltage regulator does not wake up from an RTC wakeup */
#define ANOMALY_05000092 (__SILICON_REVISION__ < 2)
-/* The IFLUSH instruction must be preceded by a CSYNC instruction */
+/* The IFLUSH Instruction Must Be Preceded by a CSYNC Instruction */
#define ANOMALY_05000093 (__SILICON_REVISION__ < 2)
-/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */
+/* Vectoring to instruction that is being filled into the i-cache may cause erroneous behavior */
#define ANOMALY_05000095 (__SILICON_REVISION__ < 2)
-/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */
+/* PREFETCH, FLUSH, and FLUSHINV Instructions Must Be Followed by a CSYNC Instruction */
#define ANOMALY_05000096 (__SILICON_REVISION__ < 2)
/* Performance Monitor 0 and 1 are swapped when monitoring memory events */
#define ANOMALY_05000097 (__SILICON_REVISION__ < 2)
@@ -233,45 +249,45 @@
#define ANOMALY_05000100 (__SILICON_REVISION__ < 2)
/* Reading X_MODIFY or Y_MODIFY while DMA channel is active */
#define ANOMALY_05000101 (__SILICON_REVISION__ < 2)
-/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
+/* Descriptor MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
#define ANOMALY_05000102 (__SILICON_REVISION__ < 2)
-/* Incorrect value written to the cycle counters */
+/* Incorrect Value Written to the Cycle Counters */
#define ANOMALY_05000103 (__SILICON_REVISION__ < 2)
-/* Stores to L1 Data memory incorrect when a specific sequence is followed */
+/* Stores to L1 Data Memory Incorrect when a Specific Sequence Is Followed */
#define ANOMALY_05000104 (__SILICON_REVISION__ < 2)
/* Programmable Flag (PF3) functionality not supported in all PPI modes */
#define ANOMALY_05000106 (__SILICON_REVISION__ < 2)
/* Data store can be lost when targeting a cache line fill */
#define ANOMALY_05000107 (__SILICON_REVISION__ < 2)
-/* Reserved bits in SYSCFG register not set at power on */
+/* Reserved Bits in SYSCFG Register Not Set at Power-On */
#define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
/* Infinite Core Stall */
#define ANOMALY_05000114 (__SILICON_REVISION__ < 2)
-/* PPI_FSx may glitch when generated by the on chip Timers */
+/* PPI_FSx may glitch when generated by the on chip Timers. */
#define ANOMALY_05000115 (__SILICON_REVISION__ < 2)
-/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
/* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */
#define ANOMALY_05000117 (__SILICON_REVISION__ < 2)
/* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */
#define ANOMALY_05000118 (__SILICON_REVISION__ < 2)
-/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
+/* DTEST_COMMAND Initiated Memory Access May Be Incorrect If Data Cache or DMA Is Active */
#define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
#define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
-/* Erroneous exception when enabling cache */
+/* Erroneous Exception when Enabling Cache */
#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
/* SPI clock polarity and phase bits incorrect during booting */
#define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
-/* DMEM_CONTROL is not set on Reset */
+/* DMEM_CONTROL<12> Is Not Set on Reset */
#define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
/* SPI boot will not complete if there is a zero fill block in the loader file */
#define ANOMALY_05000138 (__SILICON_REVISION__ == 2)
-/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */
+/* TIMERx_CONFIG[5] must be set for PPI in GP output mode with internal Frame Syncs */
#define ANOMALY_05000139 (__SILICON_REVISION__ < 2)
/* Allowing the SPORT RX FIFO to fill will cause an overflow */
#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -285,7 +301,7 @@
#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
-/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
+/* When booting from 16-bit asynchronous memory, the upper 8 bits of each word must be 0x00 */
#define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
/* Frame Delay in SPORT Multichannel Mode */
#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
@@ -293,13 +309,13 @@
#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
#define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
-/* SPORT transmit data is not gated by external frame sync in certain conditions */
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
-/* SDRAM auto-refresh and subsequent Power Ups */
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
#define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
-/* DATA CPLB page miss can result in lost write-through cache data writes */
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
#define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
/* DMA vs Core accesses to external memory */
#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
@@ -307,32 +323,47 @@
#define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
/* Overlapping Sequencer and Memory Stalls */
#define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
-/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
#define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
-/* Disabling the PPI resets the PPI configuration registers */
+/* Disabling the PPI Resets the PPI Configuration Registers */
#define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
-/* PPI TX Mode with 2 External Frame Syncs */
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
#define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
-/* In PPI Transmit Modes with External Frame Syncs POLC */
+/* In PPI Transmit Modes with External Frame Syncs POLC bit must be set to 1 */
#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
/* Internal Voltage Regulator may not start up */
#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
#define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000248 (0)
#define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000485 (0)
#endif
diff --git a/arch/blackfin/include/asm/mach-bf533/def_local.h b/arch/blackfin/include/asm/mach-bf533/def_local.h
index 14c111f..c545b54 100644
--- a/arch/blackfin/include/asm/mach-bf533/def_local.h
+++ b/arch/blackfin/include/asm/mach-bf533/def_local.h
@@ -1 +1,5 @@
+#include "gpio.h"
+#include "portmux.h"
#include "ports.h"
+
+#define BF533_FAMILY 1 /* Linux glue */
diff --git a/arch/blackfin/include/asm/mach-bf533/gpio.h b/arch/blackfin/include/asm/mach-bf533/gpio.h
new file mode 100644
index 0000000..e02416d
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf533/gpio.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 16
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+
+#define PORT_F GPIO_PF0
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf533/portmux.h b/arch/blackfin/include/asm/mach-bf533/portmux.h
new file mode 100644
index 0000000..96f5d91
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf533/portmux.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_CLK (P_DONTCARE)
+#define P_PPI0_FS1 (P_DONTCARE)
+#define P_PPI0_FS2 (P_DONTCARE)
+#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF8))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF9))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF10))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF11))
+#define P_PPI0_D0 (P_DONTCARE)
+#define P_PPI0_D1 (P_DONTCARE)
+#define P_PPI0_D2 (P_DONTCARE)
+#define P_PPI0_D3 (P_DONTCARE)
+#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF14))
+#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF13))
+#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF12))
+
+#define P_SPORT1_TSCLK (P_DONTCARE)
+#define P_SPORT1_RSCLK (P_DONTCARE)
+#define P_SPORT0_TSCLK (P_DONTCARE)
+#define P_SPORT0_RSCLK (P_DONTCARE)
+#define P_UART0_RX (P_DONTCARE)
+#define P_UART0_TX (P_DONTCARE)
+#define P_SPORT1_DRSEC (P_DONTCARE)
+#define P_SPORT1_RFS (P_DONTCARE)
+#define P_SPORT1_DTPRI (P_DONTCARE)
+#define P_SPORT1_DTSEC (P_DONTCARE)
+#define P_SPORT1_TFS (P_DONTCARE)
+#define P_SPORT1_DRPRI (P_DONTCARE)
+#define P_SPORT0_DRSEC (P_DONTCARE)
+#define P_SPORT0_RFS (P_DONTCARE)
+#define P_SPORT0_DTPRI (P_DONTCARE)
+#define P_SPORT0_DTSEC (P_DONTCARE)
+#define P_SPORT0_TFS (P_DONTCARE)
+#define P_SPORT0_DRPRI (P_DONTCARE)
+
+#define P_SPI0_MOSI (P_DONTCARE)
+#define P_SPI0_MISO (P_DONTCARE)
+#define P_SPI0_SCK (P_DONTCARE)
+#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
+#define P_TMR2 (P_DONTCARE)
+#define P_TMR1 (P_DONTCARE)
+#define P_TMR0 (P_DONTCARE)
+#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1))
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf537/anomaly.h b/arch/blackfin/include/asm/mach-bf537/anomaly.h
index b7f1a3f..43df6af 100644
--- a/arch/blackfin/include/asm/mach-bf537/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf537/anomaly.h
@@ -1,9 +1,13 @@
/*
- * File: include/asm-blackfin/mach-bf537/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2010 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
@@ -34,13 +38,13 @@
# define ANOMALY_BF537 0
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
#define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
#define ANOMALY_05000180 (1)
@@ -50,11 +54,11 @@
#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
-/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
+/* Buffered CLKIN Output Is Disabled by Default */
#define ANOMALY_05000247 (1)
/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
#define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
-/* EMAC Tx DMA error after an early frame abort */
+/* EMAC TX DMA Error After an Early Frame Abort */
#define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
/* Maximum External Clock Speed for Timers */
#define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
@@ -62,7 +66,7 @@
#define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
#define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
-/* EMAC MDIO input latched on wrong MDC edge */
+/* EMAC MDIO Input Latched on Wrong MDC Edge */
#define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
#define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
@@ -80,7 +84,7 @@
#define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
-/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
+/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */
#define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
#define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
@@ -92,15 +96,15 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
-/* SPI Master boot mode does not work well with Atmel Data flash devices */
+/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */
#define ANOMALY_05000280 (1)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
-/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
+/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */
#define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
@@ -112,25 +116,25 @@
#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
-/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
+/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */
#define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (1)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (1)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode: collisions occur in Full Duplex mode */
+/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */
#define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
+/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */
#define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
+/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */
#define ANOMALY_05000322 (1)
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot */
+/* UART Gets Disabled after UART Boot */
#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
#define ANOMALY_05000355 (1)
@@ -143,7 +147,7 @@
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
#define ANOMALY_05000371 (1)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 2)
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
#define ANOMALY_05000403 (1)
/* Speculative Fetches Can Cause Undesired External FIFO Operations */
@@ -154,29 +158,66 @@
#define ANOMALY_05000426 (1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
#define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
+#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
#define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000485 (0)
#endif
diff --git a/arch/blackfin/include/asm/mach-bf537/def_local.h b/arch/blackfin/include/asm/mach-bf537/def_local.h
index 14c111f..e210db9 100644
--- a/arch/blackfin/include/asm/mach-bf537/def_local.h
+++ b/arch/blackfin/include/asm/mach-bf537/def_local.h
@@ -1 +1,5 @@
+#include "gpio.h"
+#include "portmux.h"
#include "ports.h"
+
+#define BF537_FAMILY 1 /* Linux glue */
diff --git a/arch/blackfin/include/asm/mach-bf537/gpio.h b/arch/blackfin/include/asm/mach-bf537/gpio.h
new file mode 100644
index 0000000..f80c299
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf537/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+#define GPIO_PG0 16
+#define GPIO_PG1 17
+#define GPIO_PG2 18
+#define GPIO_PG3 19
+#define GPIO_PG4 20
+#define GPIO_PG5 21
+#define GPIO_PG6 22
+#define GPIO_PG7 23
+#define GPIO_PG8 24
+#define GPIO_PG9 25
+#define GPIO_PG10 26
+#define GPIO_PG11 27
+#define GPIO_PG12 28
+#define GPIO_PG13 29
+#define GPIO_PG14 30
+#define GPIO_PG15 31
+#define GPIO_PH0 32
+#define GPIO_PH1 33
+#define GPIO_PH2 34
+#define GPIO_PH3 35
+#define GPIO_PH4 36
+#define GPIO_PH5 37
+#define GPIO_PH6 38
+#define GPIO_PH7 39
+#define GPIO_PH8 40
+#define GPIO_PH9 41
+#define GPIO_PH10 42
+#define GPIO_PH11 43
+#define GPIO_PH12 44
+#define GPIO_PH13 45
+#define GPIO_PH14 46
+#define GPIO_PH15 47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf537/portmux.h b/arch/blackfin/include/asm/mach-bf537/portmux.h
new file mode 100644
index 0000000..71d9eae
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf537/portmux.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */
+
+#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF10
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+
+#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
+#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
+#define P_RMII0_REF_CLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_RMII0_MDINT (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_RMII0_CRS_DV (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
+
+#define PORT_PJ0 (GPIO_PH15 + 1)
+#define PORT_PJ1 (GPIO_PH15 + 2)
+#define PORT_PJ2 (GPIO_PH15 + 3)
+#define PORT_PJ3 (GPIO_PH15 + 4)
+#define PORT_PJ4 (GPIO_PH15 + 5)
+#define PORT_PJ5 (GPIO_PH15 + 6)
+#define PORT_PJ6 (GPIO_PH15 + 7)
+#define PORT_PJ7 (GPIO_PH15 + 8)
+#define PORT_PJ8 (GPIO_PH15 + 9)
+#define PORT_PJ9 (GPIO_PH15 + 10)
+#define PORT_PJ10 (GPIO_PH15 + 11)
+#define PORT_PJ11 (GPIO_PH15 + 12)
+
+#define P_MDC (P_DEFINED | P_IDENT(PORT_PJ0) | P_FUNCT(0))
+#define P_MDIO (P_DEFINED | P_IDENT(PORT_PJ1) | P_FUNCT(0))
+#define P_TWI0_SCL (P_DEFINED | P_IDENT(PORT_PJ2) | P_FUNCT(0))
+#define P_TWI0_SDA (P_DEFINED | P_IDENT(PORT_PJ3) | P_FUNCT(0))
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(0))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(0))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(PORT_PJ6) | P_FUNCT(0))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(PORT_PJ7) | P_FUNCT(0))
+#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0))
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0))
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0))
+#define P_CAN0_RX (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1))
+#define P_CAN0_TX (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
+
+#define P_MII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxD2, \
+ P_MII0_ETxD3, \
+ P_MII0_ETxEN, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_COL, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxD2, \
+ P_MII0_ERxD3, \
+ P_MII0_ERxDV, \
+ P_MII0_ERxCLK, \
+ P_MII0_ERxER, \
+ P_MII0_CRS, \
+ P_MDC, \
+ P_MDIO, 0}
+
+#define P_RMII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxEN, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxER, \
+ P_RMII0_REF_CLK, \
+ P_RMII0_MDINT, \
+ P_RMII0_CRS_DV, \
+ P_MDC, \
+ P_MDIO, 0}
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf548/anomaly.h b/arch/blackfin/include/asm/mach-bf548/anomaly.h
index 192dd67..7bda09c 100644
--- a/arch/blackfin/include/asm/mach-bf548/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf548/anomaly.h
@@ -1,41 +1,54 @@
/*
- * File: include/asm-blackfin/mach-bf548/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2010 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
- * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ * - Revision I, 07/23/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* We do not support 0.0 or 0.1 silicon - sorry */
+/* XXX: let u-boot slide
+#if __SILICON_REVISION__ < 2
+# error will not work on BF548 silicon version 0.0, or 0.1
+#endif
+*/
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000220 (1)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
#define ANOMALY_05000272 (1)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
#define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (__SILICON_REVISION__ < 1)
/* TWI Slave Boot Mode Is Not Functional */
#define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
-/* External FIFO Boot Mode Is Not Functional */
+/* FIFO Boot Mode Not Functional */
#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
#define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
@@ -157,6 +170,8 @@
#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
/* OTP Write Accesses Not Supported */
#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
@@ -170,32 +185,93 @@
/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
/* USB DMA Mode 1 Short Packet Data Corruption */
-#define ANOMALY_05000450 (1
+#define ANOMALY_05000450 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
+/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
+#define ANOMALY_05000456 (1)
+/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
+#define ANOMALY_05000457 (1)
+/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
+#define ANOMALY_05000460 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* USB DMA RX Data Corruption */
+#define ANOMALY_05000463 (1)
+/* USB TX DMA Hang */
+#define ANOMALY_05000464 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
+#define ANOMALY_05000466 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */
+#define ANOMALY_05000474 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
#define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000250 (0)
+#define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
+#define ANOMALY_05000283 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000301 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
+#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
+#define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000475 (0)
#endif
diff --git a/arch/blackfin/include/asm/mach-bf548/def_local.h b/arch/blackfin/include/asm/mach-bf548/def_local.h
index 81eca83..f1e69a7 100644
--- a/arch/blackfin/include/asm/mach-bf548/def_local.h
+++ b/arch/blackfin/include/asm/mach-bf548/def_local.h
@@ -1,2 +1,6 @@
+#include "gpio.h"
#include "mem_map.h"
+#include "portmux.h"
#include "ports.h"
+
+#define CONFIG_BF54x 1 /* Linux glue */
diff --git a/arch/blackfin/include/asm/mach-bf548/gpio.h b/arch/blackfin/include/asm/mach-bf548/gpio.h
new file mode 100644
index 0000000..28037e3
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf548/gpio.h
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define GPIO_PA0 0
+#define GPIO_PA1 1
+#define GPIO_PA2 2
+#define GPIO_PA3 3
+#define GPIO_PA4 4
+#define GPIO_PA5 5
+#define GPIO_PA6 6
+#define GPIO_PA7 7
+#define GPIO_PA8 8
+#define GPIO_PA9 9
+#define GPIO_PA10 10
+#define GPIO_PA11 11
+#define GPIO_PA12 12
+#define GPIO_PA13 13
+#define GPIO_PA14 14
+#define GPIO_PA15 15
+#define GPIO_PB0 16
+#define GPIO_PB1 17
+#define GPIO_PB2 18
+#define GPIO_PB3 19
+#define GPIO_PB4 20
+#define GPIO_PB5 21
+#define GPIO_PB6 22
+#define GPIO_PB7 23
+#define GPIO_PB8 24
+#define GPIO_PB9 25
+#define GPIO_PB10 26
+#define GPIO_PB11 27
+#define GPIO_PB12 28
+#define GPIO_PB13 29
+#define GPIO_PB14 30
+#define GPIO_PB15 31 /* N/A */
+#define GPIO_PC0 32
+#define GPIO_PC1 33
+#define GPIO_PC2 34
+#define GPIO_PC3 35
+#define GPIO_PC4 36
+#define GPIO_PC5 37
+#define GPIO_PC6 38
+#define GPIO_PC7 39
+#define GPIO_PC8 40
+#define GPIO_PC9 41
+#define GPIO_PC10 42
+#define GPIO_PC11 43
+#define GPIO_PC12 44
+#define GPIO_PC13 45
+#define GPIO_PC14 46 /* N/A */
+#define GPIO_PC15 47 /* N/A */
+#define GPIO_PD0 48
+#define GPIO_PD1 49
+#define GPIO_PD2 50
+#define GPIO_PD3 51
+#define GPIO_PD4 52
+#define GPIO_PD5 53
+#define GPIO_PD6 54
+#define GPIO_PD7 55
+#define GPIO_PD8 56
+#define GPIO_PD9 57
+#define GPIO_PD10 58
+#define GPIO_PD11 59
+#define GPIO_PD12 60
+#define GPIO_PD13 61
+#define GPIO_PD14 62
+#define GPIO_PD15 63
+#define GPIO_PE0 64
+#define GPIO_PE1 65
+#define GPIO_PE2 66
+#define GPIO_PE3 67
+#define GPIO_PE4 68
+#define GPIO_PE5 69
+#define GPIO_PE6 70
+#define GPIO_PE7 71
+#define GPIO_PE8 72
+#define GPIO_PE9 73
+#define GPIO_PE10 74
+#define GPIO_PE11 75
+#define GPIO_PE12 76
+#define GPIO_PE13 77
+#define GPIO_PE14 78
+#define GPIO_PE15 79
+#define GPIO_PF0 80
+#define GPIO_PF1 81
+#define GPIO_PF2 82
+#define GPIO_PF3 83
+#define GPIO_PF4 84
+#define GPIO_PF5 85
+#define GPIO_PF6 86
+#define GPIO_PF7 87
+#define GPIO_PF8 88
+#define GPIO_PF9 89
+#define GPIO_PF10 90
+#define GPIO_PF11 91
+#define GPIO_PF12 92
+#define GPIO_PF13 93
+#define GPIO_PF14 94
+#define GPIO_PF15 95
+#define GPIO_PG0 96
+#define GPIO_PG1 97
+#define GPIO_PG2 98
+#define GPIO_PG3 99
+#define GPIO_PG4 100
+#define GPIO_PG5 101
+#define GPIO_PG6 102
+#define GPIO_PG7 103
+#define GPIO_PG8 104
+#define GPIO_PG9 105
+#define GPIO_PG10 106
+#define GPIO_PG11 107
+#define GPIO_PG12 108
+#define GPIO_PG13 109
+#define GPIO_PG14 110
+#define GPIO_PG15 111
+#define GPIO_PH0 112
+#define GPIO_PH1 113
+#define GPIO_PH2 114
+#define GPIO_PH3 115
+#define GPIO_PH4 116
+#define GPIO_PH5 117
+#define GPIO_PH6 118
+#define GPIO_PH7 119
+#define GPIO_PH8 120
+#define GPIO_PH9 121
+#define GPIO_PH10 122
+#define GPIO_PH11 123
+#define GPIO_PH12 124
+#define GPIO_PH13 125
+#define GPIO_PH14 126 /* N/A */
+#define GPIO_PH15 127 /* N/A */
+#define GPIO_PI0 128
+#define GPIO_PI1 129
+#define GPIO_PI2 130
+#define GPIO_PI3 131
+#define GPIO_PI4 132
+#define GPIO_PI5 133
+#define GPIO_PI6 134
+#define GPIO_PI7 135
+#define GPIO_PI8 136
+#define GPIO_PI9 137
+#define GPIO_PI10 138
+#define GPIO_PI11 139
+#define GPIO_PI12 140
+#define GPIO_PI13 141
+#define GPIO_PI14 142
+#define GPIO_PI15 143
+#define GPIO_PJ0 144
+#define GPIO_PJ1 145
+#define GPIO_PJ2 146
+#define GPIO_PJ3 147
+#define GPIO_PJ4 148
+#define GPIO_PJ5 149
+#define GPIO_PJ6 150
+#define GPIO_PJ7 151
+#define GPIO_PJ8 152
+#define GPIO_PJ9 153
+#define GPIO_PJ10 154
+#define GPIO_PJ11 155
+#define GPIO_PJ12 156
+#define GPIO_PJ13 157
+#define GPIO_PJ14 158 /* N/A */
+#define GPIO_PJ15 159 /* N/A */
+
+#define MAX_BLACKFIN_GPIOS 160
+
+#ifndef __ASSEMBLY__
+
+struct gpio_port_t {
+ unsigned short port_fer;
+ unsigned short dummy1;
+ unsigned short data;
+ unsigned short dummy2;
+ unsigned short data_set;
+ unsigned short dummy3;
+ unsigned short data_clear;
+ unsigned short dummy4;
+ unsigned short dir_set;
+ unsigned short dummy5;
+ unsigned short dir_clear;
+ unsigned short dummy6;
+ unsigned short inen;
+ unsigned short dummy7;
+ unsigned int port_mux;
+};
+
+struct gpio_port_s {
+ unsigned short fer;
+ unsigned short data;
+ unsigned short dir;
+ unsigned short inen;
+ unsigned int mux;
+};
+
+#endif
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf548/portmux.h b/arch/blackfin/include/asm/mach-bf548/portmux.h
new file mode 100644
index 0000000..e222462
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf548/portmux.h
@@ -0,0 +1,320 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
+
+#define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
+#define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
+#define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
+#define P_SPORT2_TSCLK (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0))
+#define P_SPORT2_RFS (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0))
+#define P_SPORT2_DRSEC (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0))
+#define P_SPORT2_DRPRI (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0))
+#define P_SPORT2_RSCLK (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0))
+#define P_SPORT3_TFS (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0))
+#define P_SPORT3_DTSEC (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0))
+#define P_SPORT3_DTPRI (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0))
+#define P_SPORT3_TSCLK (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0))
+#define P_SPORT3_RFS (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0))
+#define P_SPORT3_DRSEC (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0))
+#define P_SPORT3_DRPRI (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0))
+#define P_SPORT3_RSCLK (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0))
+#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1))
+#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1))
+#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1))
+#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1))
+
+#define P_TWI1_SCL (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0))
+#define P_TWI1_SDA (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0))
+#define P_UART3_RTS (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0))
+#define P_UART3_CTS (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0))
+#define P_UART2_TX (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0))
+#define P_UART2_RX (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0))
+#define P_UART3_TX (P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0))
+#define P_UART3_RX (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0))
+#define P_SPI2_SS (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0))
+#define P_SPI2_SSEL1 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(0))
+#define P_SPI2_SSEL2 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0))
+#define P_SPI2_SSEL3 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0))
+#define P_SPI2_SCK (P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(0))
+#define P_SPI2_MOSI (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0))
+#define P_SPI2_MISO (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0))
+#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1))
+#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(1))
+#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(1))
+#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(1))
+
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0))
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0))
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0))
+#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
+#define P_SD_D0 (P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(0))
+#define P_SD_D1 (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
+#define P_SD_D2 (P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(0))
+#define P_SD_D3 (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(0))
+#define P_SD_CLK (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0))
+#define P_SD_CMD (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0))
+#define P_MMCLK (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1))
+#define P_MBCLK (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1))
+
+#define P_PPI1_D0 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0))
+#define P_PPI1_D1 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0))
+#define P_PPI1_D2 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0))
+#define P_PPI1_D3 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0))
+#define P_PPI1_D4 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0))
+#define P_PPI1_D5 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0))
+#define P_PPI1_D6 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0))
+#define P_PPI1_D7 (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(0))
+#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(0))
+#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0))
+#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0))
+#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0))
+#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0))
+#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0))
+#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0))
+#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(0))
+
+#define P_HOST_D8 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1))
+#define P_HOST_D9 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1))
+#define P_HOST_D10 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(1))
+#define P_HOST_D11 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(1))
+#define P_HOST_D12 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(1))
+#define P_HOST_D13 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(1))
+#define P_HOST_D14 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1))
+#define P_HOST_D15 (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1))
+#define P_HOST_D0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1))
+#define P_HOST_D1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1))
+#define P_HOST_D2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1))
+#define P_HOST_D3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(1))
+#define P_HOST_D4 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1))
+#define P_HOST_D5 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(1))
+#define P_HOST_D6 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(1))
+#define P_HOST_D7 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1))
+#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2))
+#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2))
+#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(2))
+#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(2))
+#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(2))
+#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(2))
+#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(2))
+#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(2))
+#define P_PPI2_D0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(2))
+#define P_PPI2_D1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2))
+#define P_PPI2_D2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2))
+#define P_PPI2_D3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(2))
+#define P_PPI2_D4 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(2))
+#define P_PPI2_D5 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(2))
+#define P_PPI2_D6 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(2))
+#define P_PPI2_D7 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2))
+#define P_PPI0_D18 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(3))
+#define P_PPI0_D19 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(3))
+#define P_PPI0_D20 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(3))
+#define P_PPI0_D21 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(3))
+#define P_PPI0_D22 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(3))
+#define P_PPI0_D23 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(3))
+#define P_KEY_ROW0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(3))
+#define P_KEY_ROW1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(3))
+#define P_KEY_ROW2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(3))
+#define P_KEY_ROW3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3))
+#define P_KEY_COL0 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3))
+#define P_KEY_COL1 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(3))
+#define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
+#define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
+
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
+#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
+#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(0))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(0))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(0))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(0))
+#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(0))
+#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(0))
+#define P_UART1_RTS (P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(0))
+#define P_UART1_CTS (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0))
+#define P_PPI1_CLK (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0))
+#define P_PPI1_FS1 (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0))
+#define P_PPI1_FS2 (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0))
+#define P_TWI0_SCL (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0))
+#define P_TWI0_SDA (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0))
+#define P_KEY_COL7 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1))
+#define P_KEY_ROW6 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1))
+#define P_KEY_COL6 (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1))
+#define P_KEY_ROW5 (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1))
+#define P_KEY_COL5 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1))
+#define P_KEY_ROW4 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1))
+#define P_KEY_COL4 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1))
+#define P_KEY_ROW7 (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1))
+
+#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_D0A (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+# define P_ATAPI_D1A (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+# define P_ATAPI_D2A (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+# define P_ATAPI_D3A (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+# define P_ATAPI_D4A (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+# define P_ATAPI_D5A (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+# define P_ATAPI_D6A (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+# define P_ATAPI_D7A (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+# define P_ATAPI_D8A (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+# define P_ATAPI_D9A (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+# define P_ATAPI_D10A (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+# define P_ATAPI_D11A (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+# define P_ATAPI_D12A (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+# define P_ATAPI_D13A (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+# define P_ATAPI_D14A (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+# define P_ATAPI_D15A (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#else
+# define P_ATAPI_D0A (P_DONTCARE)
+# define P_ATAPI_D1A (P_DONTCARE)
+# define P_ATAPI_D2A (P_DONTCARE)
+# define P_ATAPI_D3A (P_DONTCARE)
+# define P_ATAPI_D4A (P_DONTCARE)
+# define P_ATAPI_D5A (P_DONTCARE)
+# define P_ATAPI_D6A (P_DONTCARE)
+# define P_ATAPI_D7A (P_DONTCARE)
+# define P_ATAPI_D8A (P_DONTCARE)
+# define P_ATAPI_D9A (P_DONTCARE)
+# define P_ATAPI_D10A (P_DONTCARE)
+# define P_ATAPI_D11A (P_DONTCARE)
+# define P_ATAPI_D12A (P_DONTCARE)
+# define P_ATAPI_D13A (P_DONTCARE)
+# define P_ATAPI_D14A (P_DONTCARE)
+# define P_ATAPI_D15A (P_DONTCARE)
+#endif
+
+#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D16 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D17 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_CAN0_TX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_CAN1_TX (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_CAN1_RX (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+# define P_ATAPI_A0A (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+# define P_ATAPI_A1A (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+# define P_ATAPI_A2A (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#else
+# define P_ATAPI_A0A (P_DONTCARE)
+# define P_ATAPI_A1A (P_DONTCARE)
+# define P_ATAPI_A2A (P_DONTCARE)
+#endif
+#define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
+#define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_MTXONB (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_PPI2_FS2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2))
+#define P_PPI2_FS1 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_PPI2_CLK (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(3))
+
+#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_ATAPI_RESET (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_HOST_ADDR (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_HOST_ACK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MTX (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MRX (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MRXONB (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_A4 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_A5 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_A6 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_A7 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_A8 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_A9 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_PPI1_FS3 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_PPI2_FS3 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_TMR8 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+#define P_TMR9 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+#define P_TMR10 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+
+#define P_A10 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI0) | P_FUNCT(0))
+#define P_A11 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI1) | P_FUNCT(0))
+#define P_A12 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI2) | P_FUNCT(0))
+#define P_A13 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI3) | P_FUNCT(0))
+#define P_A14 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI4) | P_FUNCT(0))
+#define P_A15 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI5) | P_FUNCT(0))
+#define P_A16 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI6) | P_FUNCT(0))
+#define P_A17 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI7) | P_FUNCT(0))
+#define P_A18 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI8) | P_FUNCT(0))
+#define P_A19 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI9) | P_FUNCT(0))
+#define P_A20 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI10) | P_FUNCT(0))
+#define P_A21 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI11) | P_FUNCT(0))
+#define P_A22 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI12) | P_FUNCT(0))
+#define P_A23 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI13) | P_FUNCT(0))
+#define P_A24 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI14) | P_FUNCT(0))
+#define P_A25 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(0))
+#define P_NOR_CLK (P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(1))
+
+#define P_AMC_ARDY_NOR_WAIT (P_DEFINED | P_IDENT(GPIO_PJ0) | P_FUNCT(0))
+#define P_NAND_CE (P_DEFINED | P_IDENT(GPIO_PJ1) | P_FUNCT(0))
+#define P_NAND_RB (P_DEFINED | P_IDENT(GPIO_PJ2) | P_FUNCT(0))
+#define P_ATAPI_DIOR (P_DEFINED | P_IDENT(GPIO_PJ3) | P_FUNCT(0))
+#define P_ATAPI_DIOW (P_DEFINED | P_IDENT(GPIO_PJ4) | P_FUNCT(0))
+#define P_ATAPI_CS0 (P_DEFINED | P_IDENT(GPIO_PJ5) | P_FUNCT(0))
+#define P_ATAPI_CS1 (P_DEFINED | P_IDENT(GPIO_PJ6) | P_FUNCT(0))
+#define P_ATAPI_DMACK (P_DEFINED | P_IDENT(GPIO_PJ7) | P_FUNCT(0))
+#define P_ATAPI_DMARQ (P_DEFINED | P_IDENT(GPIO_PJ8) | P_FUNCT(0))
+#define P_ATAPI_INTRQ (P_DEFINED | P_IDENT(GPIO_PJ9) | P_FUNCT(0))
+#define P_ATAPI_IORDY (P_DEFINED | P_IDENT(GPIO_PJ10) | P_FUNCT(0))
+#define P_AMC_BR (P_DEFINED | P_IDENT(GPIO_PJ11) | P_FUNCT(0))
+#define P_AMC_BG (P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0))
+#define P_AMC_BGH (P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0))
+
+
+#define P_NAND_D0 (P_DONTCARE)
+#define P_NAND_D1 (P_DONTCARE)
+#define P_NAND_D2 (P_DONTCARE)
+#define P_NAND_D3 (P_DONTCARE)
+#define P_NAND_D4 (P_DONTCARE)
+#define P_NAND_D5 (P_DONTCARE)
+#define P_NAND_D6 (P_DONTCARE)
+#define P_NAND_D7 (P_DONTCARE)
+#define P_NAND_WE (P_DONTCARE)
+#define P_NAND_RE (P_DONTCARE)
+#define P_NAND_CLE (P_DONTCARE)
+#define P_NAND_ALE (P_DONTCARE)
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf561/anomaly.h b/arch/blackfin/include/asm/mach-bf561/anomaly.h
index e4aa20c..4c108c9 100644
--- a/arch/blackfin/include/asm/mach-bf561/anomaly.h
+++ b/arch/blackfin/include/asm/mach-bf561/anomaly.h
@@ -1,9 +1,13 @@
/*
- * File: include/asm-blackfin/mach-bf561/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
*
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2010 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
*/
/* This file should be up to date with:
@@ -18,19 +22,19 @@
# error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
-/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
-/* Testset instructions restricted to 32-bit aligned memory locations */
+/* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */
#define ANOMALY_05000120 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
-/* Erroneous exception when enabling cache */
+/* Erroneous Exception when Enabling Cache */
#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
-/* Signbits instruction not functional under certain conditions */
+/* SIGNBITS Instruction Not Functional under Certain Conditions */
#define ANOMALY_05000127 (1)
/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */
#define ANOMALY_05000134 (__SILICON_REVISION__ < 3)
@@ -40,7 +44,7 @@
#define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
/* Allowing the SPORT RX FIFO to fill will cause an overflow */
#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -52,7 +56,7 @@
#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
-/* IMDMA S1/D1 channel may stall */
+/* IMDMA S1/D1 Channel May Stall */
#define ANOMALY_05000149 (1)
/* DMA engine may lose data due to incorrect handshaking */
#define ANOMALY_05000150 (__SILICON_REVISION__ < 3)
@@ -66,7 +70,7 @@
#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */
#define ANOMALY_05000156 (__SILICON_REVISION__ < 4)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
#define ANOMALY_05000159 (__SILICON_REVISION__ < 3)
@@ -76,17 +80,17 @@
#define ANOMALY_05000161 (__SILICON_REVISION__ < 3)
/* DMEM_CONTROL<12> is not set on Reset */
#define ANOMALY_05000162 (__SILICON_REVISION__ < 3)
-/* SPORT transmit data is not gated by external frame sync in certain conditions */
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
#define ANOMALY_05000166 (1)
/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
#define ANOMALY_05000167 (1)
-/* SDRAM auto-refresh and subsequent Power Ups */
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
#define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
-/* DATA CPLB page miss can result in lost write-through cache data writes */
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
#define ANOMALY_05000169 (__SILICON_REVISION__ < 5)
-/* Boot-ROM code modifies SICA_IWRx wakeup registers */
+/* Boot-ROM Modifies SICA_IWRx Wakeup Registers */
#define ANOMALY_05000171 (__SILICON_REVISION__ < 5)
/* DSPID register values incorrect */
#define ANOMALY_05000172 (__SILICON_REVISION__ < 3)
@@ -96,29 +100,29 @@
#define ANOMALY_05000174 (__SILICON_REVISION__ < 5)
/* Overlapping Sequencer and Memory Stalls */
#define ANOMALY_05000175 (__SILICON_REVISION__ < 5)
-/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
#define ANOMALY_05000176 (__SILICON_REVISION__ < 5)
/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
#define ANOMALY_05000180 (1)
-/* Disabling the PPI resets the PPI configuration registers */
+/* Disabling the PPI Resets the PPI Configuration Registers */
#define ANOMALY_05000181 (__SILICON_REVISION__ < 5)
-/* IMDMA does not operate to full speed for 600MHz and higher devices */
+/* Internal Memory DMA Does Not Operate at Full Speed */
#define ANOMALY_05000182 (1)
-/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
#define ANOMALY_05000184 (__SILICON_REVISION__ < 5)
-/* PPI TX Mode with 2 External Frame Syncs */
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
#define ANOMALY_05000185 (__SILICON_REVISION__ < 5)
-/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */
+/* Upper PPI Pins Driven when PPI Packing Enabled and Data Length >8 Bits */
#define ANOMALY_05000186 (__SILICON_REVISION__ < 5)
/* IMDMA Corrupted Data after a Halt */
#define ANOMALY_05000187 (1)
/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */
#define ANOMALY_05000188 (__SILICON_REVISION__ < 5)
-/* False Protection Exceptions */
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
#define ANOMALY_05000189 (__SILICON_REVISION__ < 5)
-/* PPI not functional at core voltage < 1Volt */
+/* PPI Not Functional at Core Voltage < 1Volt */
#define ANOMALY_05000190 (1)
/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
@@ -126,7 +130,7 @@
#define ANOMALY_05000193 (__SILICON_REVISION__ < 5)
/* Restarting SPORT in Specific Modes May Cause Data Corruption */
#define ANOMALY_05000194 (__SILICON_REVISION__ < 5)
-/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
/* Current DMA Address Shows Wrong Value During Carry Fix */
#define ANOMALY_05000199 (__SILICON_REVISION__ < 5)
@@ -134,9 +138,9 @@
#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
/* Possible Infinite Stall with Specific Dual-DAG Situation */
#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
-/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
#define ANOMALY_05000204 (__SILICON_REVISION__ < 5)
-/* Specific sequence that can cause DMA error or DMA stopping */
+/* Specific Sequence that Can Cause DMA Error or DMA Stopping */
#define ANOMALY_05000205 (__SILICON_REVISION__ < 5)
/* Recovery from "Brown-Out" Condition */
#define ANOMALY_05000207 (__SILICON_REVISION__ < 5)
@@ -148,8 +152,8 @@
#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
/* NMI Event at Boot Time Results in Unpredictable State */
#define ANOMALY_05000219 (__SILICON_REVISION__ < 5)
-/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
-#define ANOMALY_05000220 (__SILICON_REVISION__ < 5)
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 4)
/* Incorrect Pulse-Width of UART Start Bit */
#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
/* Scratchpad Memory Bank Reads May Return Incorrect Data */
@@ -158,7 +162,7 @@
#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
/* UART STB Bit Incorrectly Affects Receiver Setting */
#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
-/* SPORT data transmit lines are incorrectly driven in multichannel mode */
+/* SPORT Data Transmit Lines Are Incorrectly Driven in Multichannel Mode */
#define ANOMALY_05000232 (__SILICON_REVISION__ < 5)
/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
@@ -166,7 +170,7 @@
#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
-/* TESTSET operation forces stall on the other core */
+/* TESTSET Operation Forces Stall on the Other Core */
#define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5)
@@ -192,9 +196,9 @@
#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
-/* IMDMA destination IRQ status must be read prior to using IMDMA */
+/* IMDMA Destination IRQ Status Must Be Read Prior to Using IMDMA */
#define ANOMALY_05000266 (__SILICON_REVISION__ > 3)
-/* IMDMA may corrupt data under certain conditions */
+/* IMDMA May Corrupt Data under Certain Conditions */
#define ANOMALY_05000267 (1)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
#define ANOMALY_05000269 (1)
@@ -202,7 +206,7 @@
#define ANOMALY_05000270 (1)
/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
#define ANOMALY_05000272 (1)
-/* Data cache write back to external synchronous memory may be lost */
+/* Data Cache Write Back to External Synchronous Memory May Be Lost */
#define ANOMALY_05000274 (1)
/* PPI Timing and Sampling Information Updates */
#define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
@@ -212,17 +216,21 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
-#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
+/* Temporarily walk around for bug 5423 till this issue is confirmed by
+ * official anomaly document. It looks 05000281 still exists on bf561
+ * v0.5.
+ */
+#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5)
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (1)
-/* A read will receive incorrect data under certain conditions */
+/* Reads Will Receive Incorrect Data under Certain Conditions */
#define ANOMALY_05000287 (__SILICON_REVISION__ < 5)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 5)
/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
#define ANOMALY_05000301 (1)
-/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (1)
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
@@ -230,25 +238,25 @@
#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (1)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (1)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (1)
-/* PF2 Output Remains Asserted After SPI Master Boot */
+/* PF2 Output Remains Asserted after SPI Master Boot */
#define ANOMALY_05000320 (__SILICON_REVISION__ > 3)
-/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */
+/* Erroneous GPIO Flag Pin Operations under Specific Sequences */
#define ANOMALY_05000323 (1)
-/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */
+/* SPORT Secondary Receive Channel Not Functional when Word Length >16 Bits */
#define ANOMALY_05000326 (__SILICON_REVISION__ > 3)
-/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */
+/* 24-Bit SPI Boot Mode Is Not Functional */
#define ANOMALY_05000331 (__SILICON_REVISION__ < 5)
-/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */
+/* Slave SPI Boot Mode Is Not Functional */
#define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
-/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */
+/* Flag Data Register Writes One SCLK Cycle after Edge Is Detected May Clear Interrupt Status */
#define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */
+/* ALT_TIMING Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000339 (__SILICON_REVISION__ < 5)
/* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */
#define ANOMALY_05000343 (__SILICON_REVISION__ < 5)
@@ -262,6 +270,8 @@
#define ANOMALY_05000366 (1)
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
#define ANOMALY_05000371 (1)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 4)
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
#define ANOMALY_05000403 (1)
/* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */
@@ -276,19 +286,43 @@
#define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (__SILICON_REVISION__ < 4)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000119 (0)
#define ANOMALY_05000158 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000485 (0)
#endif
diff --git a/arch/blackfin/include/asm/mach-bf561/def_local.h b/arch/blackfin/include/asm/mach-bf561/def_local.h
index 597dcec..08e37e5 100644
--- a/arch/blackfin/include/asm/mach-bf561/def_local.h
+++ b/arch/blackfin/include/asm/mach-bf561/def_local.h
@@ -9,4 +9,8 @@
#define bfin_write_WDOG_CTL(val) bfin_write_WDOGA_CTL(val)
#define bfin_write_WDOG_STAT(val) bfin_write_WDOGA_STAT(val)
+#include "gpio.h"
+#include "portmux.h"
#include "ports.h"
+
+#define BF561_FAMILY 1 /* Linux glue */
diff --git a/arch/blackfin/include/asm/mach-bf561/gpio.h b/arch/blackfin/include/asm/mach-bf561/gpio.h
new file mode 100644
index 0000000..4f8aa5d
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf561/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+#define GPIO_PF16 16
+#define GPIO_PF17 17
+#define GPIO_PF18 18
+#define GPIO_PF19 19
+#define GPIO_PF20 20
+#define GPIO_PF21 21
+#define GPIO_PF22 22
+#define GPIO_PF23 23
+#define GPIO_PF24 24
+#define GPIO_PF25 25
+#define GPIO_PF26 26
+#define GPIO_PF27 27
+#define GPIO_PF28 28
+#define GPIO_PF29 29
+#define GPIO_PF30 30
+#define GPIO_PF31 31
+#define GPIO_PF32 32
+#define GPIO_PF33 33
+#define GPIO_PF34 34
+#define GPIO_PF35 35
+#define GPIO_PF36 36
+#define GPIO_PF37 37
+#define GPIO_PF38 38
+#define GPIO_PF39 39
+#define GPIO_PF40 40
+#define GPIO_PF41 41
+#define GPIO_PF42 42
+#define GPIO_PF43 43
+#define GPIO_PF44 44
+#define GPIO_PF45 45
+#define GPIO_PF46 46
+#define GPIO_PF47 47
+
+#define PORT_FIO0 GPIO_0
+#define PORT_FIO1 GPIO_16
+#define PORT_FIO2 GPIO_32
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/include/asm/mach-bf561/portmux.h b/arch/blackfin/include/asm/mach-bf561/portmux.h
new file mode 100644
index 0000000..2339ffd
--- /dev/null
+++ b/arch/blackfin/include/asm/mach-bf561/portmux.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_CLK (P_DONTCARE)
+#define P_PPI0_FS1 (P_DONTCARE)
+#define P_PPI0_FS2 (P_DONTCARE)
+#define P_PPI0_FS3 (P_DONTCARE)
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF47))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF46))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF45))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF44))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF43))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF42))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF41))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF40))
+#define P_PPI0_D0 (P_DONTCARE)
+#define P_PPI0_D1 (P_DONTCARE)
+#define P_PPI0_D2 (P_DONTCARE)
+#define P_PPI0_D3 (P_DONTCARE)
+#define P_PPI0_D4 (P_DONTCARE)
+#define P_PPI0_D5 (P_DONTCARE)
+#define P_PPI0_D6 (P_DONTCARE)
+#define P_PPI0_D7 (P_DONTCARE)
+#define P_PPI1_CLK (P_DONTCARE)
+#define P_PPI1_FS1 (P_DONTCARE)
+#define P_PPI1_FS2 (P_DONTCARE)
+#define P_PPI1_FS3 (P_DONTCARE)
+#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PF39))
+#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PF38))
+#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PF37))
+#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PF36))
+#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PF35))
+#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PF34))
+#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PF33))
+#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PF32))
+#define P_PPI1_D0 (P_DONTCARE)
+#define P_PPI1_D1 (P_DONTCARE)
+#define P_PPI1_D2 (P_DONTCARE)
+#define P_PPI1_D3 (P_DONTCARE)
+#define P_PPI1_D4 (P_DONTCARE)
+#define P_PPI1_D5 (P_DONTCARE)
+#define P_PPI1_D6 (P_DONTCARE)
+#define P_PPI1_D7 (P_DONTCARE)
+#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PF31))
+#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PF30))
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF29))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF28))
+#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF27))
+#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF26))
+#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PF25))
+#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PF24))
+#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PF23))
+#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PF22))
+#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PF21))
+#define P_SPORT1_DRPRI (P_DONTCARE)
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF20))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF19))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF18))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF17))
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF16))
+#define P_SPORT0_DRPRI (P_DONTCARE)
+#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_TMR11 (P_DONTCARE)
+#define P_TMR10 (P_DONTCARE)
+#define P_TMR9 (P_DONTCARE)
+#define P_TMR8 (P_DONTCARE)
+#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_SPI0_MOSI (P_DONTCARE)
+#define P_SPI0_MISO (P_DONTCARE)
+#define P_SPI0_SCK (P_DONTCARE)
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
new file mode 100644
index 0000000..b17207f
--- /dev/null
+++ b/arch/blackfin/include/asm/portmux.h
@@ -0,0 +1,1194 @@
+/*
+ * Common header file for Blackfin family of processors
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _PORTMUX_H_
+#define _PORTMUX_H_
+
+#define P_IDENT(x) ((x) & 0x1FF)
+#define P_FUNCT(x) (((x) & 0x3) << 9)
+#define P_FUNCT2MUX(x) (((x) >> 9) & 0x3)
+#define P_DEFINED 0x8000
+#define P_UNDEF 0x4000
+#define P_MAYSHARE 0x2000
+#define P_DONTCARE 0x1000
+
+#ifndef CONFIG_BFIN_GPIO_TRACK
+#define peripheral_request(per, label) peripheral_request(per)
+#define peripheral_request_list(per, label) peripheral_request_list(per)
+#endif
+
+int peripheral_request(unsigned short per, const char *label);
+void peripheral_free(unsigned short per);
+int peripheral_request_list(const unsigned short per[], const char *label);
+void peripheral_free_list(const unsigned short per[]);
+
+#include <asm/blackfin.h>
+
+#ifndef P_SPORT2_TFS
+#define P_SPORT2_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DTSEC
+#define P_SPORT2_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DTPRI
+#define P_SPORT2_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT2_TSCLK
+#define P_SPORT2_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT2_RFS
+#define P_SPORT2_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DRSEC
+#define P_SPORT2_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DRPRI
+#define P_SPORT2_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT2_RSCLK
+#define P_SPORT2_RSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT3_TFS
+#define P_SPORT3_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DTSEC
+#define P_SPORT3_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DTPRI
+#define P_SPORT3_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT3_TSCLK
+#define P_SPORT3_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT3_RFS
+#define P_SPORT3_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DRSEC
+#define P_SPORT3_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DRPRI
+#define P_SPORT3_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT3_RSCLK
+#define P_SPORT3_RSCLK P_UNDEF
+#endif
+
+#ifndef P_TMR4
+#define P_TMR4 P_UNDEF
+#endif
+
+#ifndef P_TMR5
+#define P_TMR5 P_UNDEF
+#endif
+
+#ifndef P_TMR6
+#define P_TMR6 P_UNDEF
+#endif
+
+#ifndef P_TMR7
+#define P_TMR7 P_UNDEF
+#endif
+
+#ifndef P_TWI1_SCL
+#define P_TWI1_SCL P_UNDEF
+#endif
+
+#ifndef P_TWI1_SDA
+#define P_TWI1_SDA P_UNDEF
+#endif
+
+#ifndef P_UART3_RTS
+#define P_UART3_RTS P_UNDEF
+#endif
+
+#ifndef P_UART3_CTS
+#define P_UART3_CTS P_UNDEF
+#endif
+
+#ifndef P_UART2_TX
+#define P_UART2_TX P_UNDEF
+#endif
+
+#ifndef P_UART2_RX
+#define P_UART2_RX P_UNDEF
+#endif
+
+#ifndef P_UART3_TX
+#define P_UART3_TX P_UNDEF
+#endif
+
+#ifndef P_UART3_RX
+#define P_UART3_RX P_UNDEF
+#endif
+
+#ifndef P_SPI2_SS
+#define P_SPI2_SS P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL1
+#define P_SPI2_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL2
+#define P_SPI2_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL3
+#define P_SPI2_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL4
+#define P_SPI2_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL5
+#define P_SPI2_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL6
+#define P_SPI2_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL7
+#define P_SPI2_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SCK
+#define P_SPI2_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI2_MOSI
+#define P_SPI2_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI2_MISO
+#define P_SPI2_MISO P_UNDEF
+#endif
+
+#ifndef P_TMR0
+#define P_TMR0 P_UNDEF
+#endif
+
+#ifndef P_TMR1
+#define P_TMR1 P_UNDEF
+#endif
+
+#ifndef P_TMR2
+#define P_TMR2 P_UNDEF
+#endif
+
+#ifndef P_TMR3
+#define P_TMR3 P_UNDEF
+#endif
+
+#ifndef P_SPORT0_TFS
+#define P_SPORT0_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DTSEC
+#define P_SPORT0_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DTPRI
+#define P_SPORT0_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT0_TSCLK
+#define P_SPORT0_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT0_RFS
+#define P_SPORT0_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DRSEC
+#define P_SPORT0_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DRPRI
+#define P_SPORT0_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT0_RSCLK
+#define P_SPORT0_RSCLK P_UNDEF
+#endif
+
+#ifndef P_SD_D0
+#define P_SD_D0 P_UNDEF
+#endif
+
+#ifndef P_SD_D1
+#define P_SD_D1 P_UNDEF
+#endif
+
+#ifndef P_SD_D2
+#define P_SD_D2 P_UNDEF
+#endif
+
+#ifndef P_SD_D3
+#define P_SD_D3 P_UNDEF
+#endif
+
+#ifndef P_SD_CLK
+#define P_SD_CLK P_UNDEF
+#endif
+
+#ifndef P_SD_CMD
+#define P_SD_CMD P_UNDEF
+#endif
+
+#ifndef P_MMCLK
+#define P_MMCLK P_UNDEF
+#endif
+
+#ifndef P_MBCLK
+#define P_MBCLK P_UNDEF
+#endif
+
+#ifndef P_PPI1_D0
+#define P_PPI1_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D1
+#define P_PPI1_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D2
+#define P_PPI1_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D3
+#define P_PPI1_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D4
+#define P_PPI1_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D5
+#define P_PPI1_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D6
+#define P_PPI1_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D7
+#define P_PPI1_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D8
+#define P_PPI1_D8 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D9
+#define P_PPI1_D9 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D10
+#define P_PPI1_D10 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D11
+#define P_PPI1_D11 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D12
+#define P_PPI1_D12 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D13
+#define P_PPI1_D13 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D14
+#define P_PPI1_D14 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D15
+#define P_PPI1_D15 P_UNDEF
+#endif
+
+#ifndef P_HOST_D8
+#define P_HOST_D8 P_UNDEF
+#endif
+
+#ifndef P_HOST_D9
+#define P_HOST_D9 P_UNDEF
+#endif
+
+#ifndef P_HOST_D10
+#define P_HOST_D10 P_UNDEF
+#endif
+
+#ifndef P_HOST_D11
+#define P_HOST_D11 P_UNDEF
+#endif
+
+#ifndef P_HOST_D12
+#define P_HOST_D12 P_UNDEF
+#endif
+
+#ifndef P_HOST_D13
+#define P_HOST_D13 P_UNDEF
+#endif
+
+#ifndef P_HOST_D14
+#define P_HOST_D14 P_UNDEF
+#endif
+
+#ifndef P_HOST_D15
+#define P_HOST_D15 P_UNDEF
+#endif
+
+#ifndef P_HOST_D0
+#define P_HOST_D0 P_UNDEF
+#endif
+
+#ifndef P_HOST_D1
+#define P_HOST_D1 P_UNDEF
+#endif
+
+#ifndef P_HOST_D2
+#define P_HOST_D2 P_UNDEF
+#endif
+
+#ifndef P_HOST_D3
+#define P_HOST_D3 P_UNDEF
+#endif
+
+#ifndef P_HOST_D4
+#define P_HOST_D4 P_UNDEF
+#endif
+
+#ifndef P_HOST_D5
+#define P_HOST_D5 P_UNDEF
+#endif
+
+#ifndef P_HOST_D6
+#define P_HOST_D6 P_UNDEF
+#endif
+
+#ifndef P_HOST_D7
+#define P_HOST_D7 P_UNDEF
+#endif
+
+#ifndef P_SPORT1_TFS
+#define P_SPORT1_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DTSEC
+#define P_SPORT1_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DTPRI
+#define P_SPORT1_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT1_TSCLK
+#define P_SPORT1_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT1_RFS
+#define P_SPORT1_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DRSEC
+#define P_SPORT1_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DRPRI
+#define P_SPORT1_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT1_RSCLK
+#define P_SPORT1_RSCLK P_UNDEF
+#endif
+
+#ifndef P_PPI2_D0
+#define P_PPI2_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D1
+#define P_PPI2_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D2
+#define P_PPI2_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D3
+#define P_PPI2_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D4
+#define P_PPI2_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D5
+#define P_PPI2_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D6
+#define P_PPI2_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D7
+#define P_PPI2_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D18
+#define P_PPI0_D18 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D19
+#define P_PPI0_D19 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D20
+#define P_PPI0_D20 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D21
+#define P_PPI0_D21 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D22
+#define P_PPI0_D22 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D23
+#define P_PPI0_D23 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW0
+#define P_KEY_ROW0 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW1
+#define P_KEY_ROW1 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW2
+#define P_KEY_ROW2 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW3
+#define P_KEY_ROW3 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL0
+#define P_KEY_COL0 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL1
+#define P_KEY_COL1 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL2
+#define P_KEY_COL2 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL3
+#define P_KEY_COL3 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SCK
+#define P_SPI0_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI0_MISO
+#define P_SPI0_MISO P_UNDEF
+#endif
+
+#ifndef P_SPI0_MOSI
+#define P_SPI0_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI0_SS
+#define P_SPI0_SS P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL1
+#define P_SPI0_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL2
+#define P_SPI0_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL3
+#define P_SPI0_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL4
+#define P_SPI0_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL5
+#define P_SPI0_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL6
+#define P_SPI0_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL7
+#define P_SPI0_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_UART0_TX
+#define P_UART0_TX P_UNDEF
+#endif
+
+#ifndef P_UART0_RX
+#define P_UART0_RX P_UNDEF
+#endif
+
+#ifndef P_UART1_RTS
+#define P_UART1_RTS P_UNDEF
+#endif
+
+#ifndef P_UART1_CTS
+#define P_UART1_CTS P_UNDEF
+#endif
+
+#ifndef P_PPI1_CLK
+#define P_PPI1_CLK P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS1
+#define P_PPI1_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS2
+#define P_PPI1_FS2 P_UNDEF
+#endif
+
+#ifndef P_TWI0_SCL
+#define P_TWI0_SCL P_UNDEF
+#endif
+
+#ifndef P_TWI0_SDA
+#define P_TWI0_SDA P_UNDEF
+#endif
+
+#ifndef P_KEY_COL7
+#define P_KEY_COL7 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW6
+#define P_KEY_ROW6 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL6
+#define P_KEY_COL6 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW5
+#define P_KEY_ROW5 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL5
+#define P_KEY_COL5 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW4
+#define P_KEY_ROW4 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL4
+#define P_KEY_COL4 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW7
+#define P_KEY_ROW7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D0
+#define P_PPI0_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D1
+#define P_PPI0_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D2
+#define P_PPI0_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D3
+#define P_PPI0_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D4
+#define P_PPI0_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D5
+#define P_PPI0_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D6
+#define P_PPI0_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D7
+#define P_PPI0_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D8
+#define P_PPI0_D8 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D9
+#define P_PPI0_D9 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D10
+#define P_PPI0_D10 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D11
+#define P_PPI0_D11 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D12
+#define P_PPI0_D12 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D13
+#define P_PPI0_D13 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D14
+#define P_PPI0_D14 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D15
+#define P_PPI0_D15 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D0A
+#define P_ATAPI_D0A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D1A
+#define P_ATAPI_D1A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D2A
+#define P_ATAPI_D2A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D3A
+#define P_ATAPI_D3A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D4A
+#define P_ATAPI_D4A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D5A
+#define P_ATAPI_D5A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D6A
+#define P_ATAPI_D6A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D7A
+#define P_ATAPI_D7A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D8A
+#define P_ATAPI_D8A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D9A
+#define P_ATAPI_D9A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D10A
+#define P_ATAPI_D10A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D11A
+#define P_ATAPI_D11A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D12A
+#define P_ATAPI_D12A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D13A
+#define P_ATAPI_D13A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D14A
+#define P_ATAPI_D14A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D15A
+#define P_ATAPI_D15A P_UNDEF
+#endif
+
+#ifndef P_PPI0_CLK
+#define P_PPI0_CLK P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS1
+#define P_PPI0_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS2
+#define P_PPI0_FS2 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D16
+#define P_PPI0_D16 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D17
+#define P_PPI0_D17 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL1
+#define P_SPI1_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL2
+#define P_SPI1_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL3
+#define P_SPI1_SSEL3 P_UNDEF
+#endif
+
+
+#ifndef P_SPI1_SSEL4
+#define P_SPI1_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL5
+#define P_SPI1_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL6
+#define P_SPI1_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL7
+#define P_SPI1_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SCK
+#define P_SPI1_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI1_MISO
+#define P_SPI1_MISO P_UNDEF
+#endif
+
+#ifndef P_SPI1_MOSI
+#define P_SPI1_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI1_SS
+#define P_SPI1_SS P_UNDEF
+#endif
+
+#ifndef P_CAN0_TX
+#define P_CAN0_TX P_UNDEF
+#endif
+
+#ifndef P_CAN0_RX
+#define P_CAN0_RX P_UNDEF
+#endif
+
+#ifndef P_CAN1_TX
+#define P_CAN1_TX P_UNDEF
+#endif
+
+#ifndef P_CAN1_RX
+#define P_CAN1_RX P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A0A
+#define P_ATAPI_A0A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A1A
+#define P_ATAPI_A1A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A2A
+#define P_ATAPI_A2A P_UNDEF
+#endif
+
+#ifndef P_HOST_CE
+#define P_HOST_CE P_UNDEF
+#endif
+
+#ifndef P_HOST_RD
+#define P_HOST_RD P_UNDEF
+#endif
+
+#ifndef P_HOST_WR
+#define P_HOST_WR P_UNDEF
+#endif
+
+#ifndef P_MTXONB
+#define P_MTXONB P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS2
+#define P_PPI2_FS2 P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS1
+#define P_PPI2_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI2_CLK
+#define P_PPI2_CLK P_UNDEF
+#endif
+
+#ifndef P_CNT_CZM
+#define P_CNT_CZM P_UNDEF
+#endif
+
+#ifndef P_UART1_TX
+#define P_UART1_TX P_UNDEF
+#endif
+
+#ifndef P_UART1_RX
+#define P_UART1_RX P_UNDEF
+#endif
+
+#ifndef P_ATAPI_RESET
+#define P_ATAPI_RESET P_UNDEF
+#endif
+
+#ifndef P_HOST_ADDR
+#define P_HOST_ADDR P_UNDEF
+#endif
+
+#ifndef P_HOST_ACK
+#define P_HOST_ACK P_UNDEF
+#endif
+
+#ifndef P_MTX
+#define P_MTX P_UNDEF
+#endif
+
+#ifndef P_MRX
+#define P_MRX P_UNDEF
+#endif
+
+#ifndef P_MRXONB
+#define P_MRXONB P_UNDEF
+#endif
+
+#ifndef P_A4
+#define P_A4 P_UNDEF
+#endif
+
+#ifndef P_A5
+#define P_A5 P_UNDEF
+#endif
+
+#ifndef P_A6
+#define P_A6 P_UNDEF
+#endif
+
+#ifndef P_A7
+#define P_A7 P_UNDEF
+#endif
+
+#ifndef P_A8
+#define P_A8 P_UNDEF
+#endif
+
+#ifndef P_A9
+#define P_A9 P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS3
+#define P_PPI1_FS3 P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS3
+#define P_PPI2_FS3 P_UNDEF
+#endif
+
+#ifndef P_TMR8
+#define P_TMR8 P_UNDEF
+#endif
+
+#ifndef P_TMR9
+#define P_TMR9 P_UNDEF
+#endif
+
+#ifndef P_TMR10
+#define P_TMR10 P_UNDEF
+#endif
+#ifndef P_TMR11
+#define P_TMR11 P_UNDEF
+#endif
+
+#ifndef P_DMAR0
+#define P_DMAR0 P_UNDEF
+#endif
+
+#ifndef P_DMAR1
+#define P_DMAR1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS3
+#define P_PPI0_FS3 P_UNDEF
+#endif
+
+#ifndef P_CNT_CDG
+#define P_CNT_CDG P_UNDEF
+#endif
+
+#ifndef P_CNT_CUD
+#define P_CNT_CUD P_UNDEF
+#endif
+
+#ifndef P_A10
+#define P_A10 P_UNDEF
+#endif
+
+#ifndef P_A11
+#define P_A11 P_UNDEF
+#endif
+
+#ifndef P_A12
+#define P_A12 P_UNDEF
+#endif
+
+#ifndef P_A13
+#define P_A13 P_UNDEF
+#endif
+
+#ifndef P_A14
+#define P_A14 P_UNDEF
+#endif
+
+#ifndef P_A15
+#define P_A15 P_UNDEF
+#endif
+
+#ifndef P_A16
+#define P_A16 P_UNDEF
+#endif
+
+#ifndef P_A17
+#define P_A17 P_UNDEF
+#endif
+
+#ifndef P_A18
+#define P_A18 P_UNDEF
+#endif
+
+#ifndef P_A19
+#define P_A19 P_UNDEF
+#endif
+
+#ifndef P_A20
+#define P_A20 P_UNDEF
+#endif
+
+#ifndef P_A21
+#define P_A21 P_UNDEF
+#endif
+
+#ifndef P_A22
+#define P_A22 P_UNDEF
+#endif
+
+#ifndef P_A23
+#define P_A23 P_UNDEF
+#endif
+
+#ifndef P_A24
+#define P_A24 P_UNDEF
+#endif
+
+#ifndef P_A25
+#define P_A25 P_UNDEF
+#endif
+
+#ifndef P_NOR_CLK
+#define P_NOR_CLK P_UNDEF
+#endif
+
+#ifndef P_TMRCLK
+#define P_TMRCLK P_UNDEF
+#endif
+
+#ifndef P_AMC_ARDY_NOR_WAIT
+#define P_AMC_ARDY_NOR_WAIT P_UNDEF
+#endif
+
+#ifndef P_NAND_CE
+#define P_NAND_CE P_UNDEF
+#endif
+
+#ifndef P_NAND_RB
+#define P_NAND_RB P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DIOR
+#define P_ATAPI_DIOR P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DIOW
+#define P_ATAPI_DIOW P_UNDEF
+#endif
+
+#ifndef P_ATAPI_CS0
+#define P_ATAPI_CS0 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_CS1
+#define P_ATAPI_CS1 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DMACK
+#define P_ATAPI_DMACK P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DMARQ
+#define P_ATAPI_DMARQ P_UNDEF
+#endif
+
+#ifndef P_ATAPI_INTRQ
+#define P_ATAPI_INTRQ P_UNDEF
+#endif
+
+#ifndef P_ATAPI_IORDY
+#define P_ATAPI_IORDY P_UNDEF
+#endif
+
+#ifndef P_AMC_BR
+#define P_AMC_BR P_UNDEF
+#endif
+
+#ifndef P_AMC_BG
+#define P_AMC_BG P_UNDEF
+#endif
+
+#ifndef P_AMC_BGH
+#define P_AMC_BGH P_UNDEF
+#endif
+
+/* EMAC */
+
+#ifndef P_MII0_ETxD0
+#define P_MII0_ETxD0 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD1
+#define P_MII0_ETxD1 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD2
+#define P_MII0_ETxD2 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD3
+#define P_MII0_ETxD3 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxEN
+#define P_MII0_ETxEN P_UNDEF
+#endif
+
+#ifndef P_MII0_TxCLK
+#define P_MII0_TxCLK P_UNDEF
+#endif
+
+#ifndef P_MII0_PHYINT
+#define P_MII0_PHYINT P_UNDEF
+#endif
+
+#ifndef P_MII0_COL
+#define P_MII0_COL P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD0
+#define P_MII0_ERxD0 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD1
+#define P_MII0_ERxD1 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD2
+#define P_MII0_ERxD2 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD3
+#define P_MII0_ERxD3 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxDV
+#define P_MII0_ERxDV P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxCLK
+#define P_MII0_ERxCLK P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxER
+#define P_MII0_ERxER P_UNDEF
+#endif
+
+#ifndef P_MII0_CRS
+#define P_MII0_CRS P_UNDEF
+#endif
+
+#ifndef P_RMII0_REF_CLK
+#define P_RMII0_REF_CLK P_UNDEF
+#endif
+
+#ifndef P_RMII0_MDINT
+#define P_RMII0_MDINT P_UNDEF
+#endif
+
+#ifndef P_RMII0_CRS_DV
+#define P_RMII0_CRS_DV P_UNDEF
+#endif
+
+#ifndef P_MDC
+#define P_MDC P_UNDEF
+#endif
+
+#ifndef P_MDIO
+#define P_MDIO P_UNDEF
+#endif
+
+#endif /* _PORTMUX_H_ */
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index 6bc7208..952438e 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -118,4 +118,6 @@
return tmp;
}
+void bfin_reset_boot_spi_cs(unsigned short pin);
+
#endif /* _BLACKFIN_SYSTEM_H */
diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk
index 793cc43..aba96b3 100644
--- a/arch/nios2/config.mk
+++ b/arch/nios2/config.mk
@@ -30,3 +30,6 @@
PLATFORM_CPPFLAGS += -G0
LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds
+
+LDFLAGS += --gc-sections
+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
diff --git a/arch/nios2/include/asm/gpio.h b/arch/nios2/include/asm/gpio.h
index 76c425e..cff1dd9 100644
--- a/arch/nios2/include/asm/gpio.h
+++ b/arch/nios2/include/asm/gpio.h
@@ -21,6 +21,11 @@
#ifdef CONFIG_SYS_GPIO_BASE
#include <asm/io.h>
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
static inline int gpio_direction_input(unsigned gpio)
{
writel(1, CONFIG_SYS_GPIO_BASE + (gpio << 2));
@@ -43,6 +48,7 @@
writel(value ? 3 : 2, CONFIG_SYS_GPIO_BASE + (gpio << 2));
}
#else
+extern int gpio_request(unsigned gpio, const char *label);
extern int gpio_direction_input(unsigned gpio);
extern int gpio_direction_output(unsigned gpio, int value);
extern int gpio_get_value(unsigned gpio);
diff --git a/arch/nios2/lib/bootm.c b/arch/nios2/lib/bootm.c
index e4093a8..e25a113 100644
--- a/arch/nios2/lib/bootm.c
+++ b/arch/nios2/lib/bootm.c
@@ -34,6 +34,18 @@
char *commandline = getenv("bootargs");
ulong initrd_start = images->rd_start;
ulong initrd_end = images->rd_end;
+ char *of_flat_tree = NULL;
+#if defined(CONFIG_OF_LIBFDT)
+ ulong of_size = 0;
+
+ /* find flattened device tree */
+ if (boot_get_fdt(flag, argc, argv, images, &of_flat_tree, &of_size))
+ return 1;
+#endif
+ if (!of_flat_tree)
+ of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16);
+ if (of_flat_tree)
+ initrd_end = (ulong)of_flat_tree;
if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
return 1;
@@ -45,6 +57,15 @@
debug("bootargs=%s @ 0x%lx\n", commandline, (ulong)&commandline);
debug("initrd=0x%lx-0x%lx\n", (ulong)initrd_start, (ulong)initrd_end);
+ /* kernel parameters passing
+ * r4 : NIOS magic
+ * r5 : initrd start
+ * r6 : initrd end or fdt
+ * r7 : kernel command line
+ * fdt is passed to kernel via r6, the same as initrd_end. fdt will be
+ * verified with fdt magic. when both initrd and fdt are used at the
+ * same time, fdt must follow immediately after initrd.
+ */
kernel(NIOS_MAGIC, initrd_start, initrd_end, commandline);
/* does not return */
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index b664c64..42387b4 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -55,6 +55,7 @@
char name[15];
u32 partid;
} cpu_type_list [] = {
+ CPU_TYPE_ENTRY(8308),
CPU_TYPE_ENTRY(8311),
CPU_TYPE_ENTRY(8313),
CPU_TYPE_ENTRY(8314),
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index b5076a9..d04b192 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -100,7 +100,8 @@
u32 lcrr;
u32 csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
@@ -132,7 +133,8 @@
u32 qe_clk;
u32 brg_clk;
#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC837x)
u32 pciexp1_clk;
u32 pciexp2_clk;
#endif
@@ -164,7 +166,8 @@
sccr = im->clk.sccr;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
@@ -202,7 +205,8 @@
}
#endif
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) || \
+ defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
@@ -319,7 +323,7 @@
i2c1_clk = csb_clk;
#elif defined(CONFIG_MPC832x)
i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC831x)
+#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x)
i2c1_clk = enc_clk;
#elif defined(CONFIG_FSL_ESDHC)
i2c1_clk = sdhc_clk;
@@ -328,7 +332,8 @@
i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC837x)
switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
case 0:
pciexp1_clk = 0;
@@ -444,7 +449,8 @@
#endif
gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
gd->tsec1_clk = tsec1_clk;
gd->tsec2_clk = tsec2_clk;
gd->usbdr_clk = usbdr_clk;
@@ -525,7 +531,8 @@
#if defined(CONFIG_FSL_ESDHC)
printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
#endif
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index d3dd44e..c854ce9 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -60,7 +60,8 @@
#if defined(CONFIG_MPC83xx)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
@@ -76,7 +77,8 @@
u32 lbiu_clk;
u32 lclk_clk;
u32 pci_clk;
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC837x)
u32 pciexp1_clk;
u32 pciexp2_clk;
#endif
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 6b42a73..3a9cdc4 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -73,7 +73,11 @@
u32 obir; /* Output Buffer Impedance Register */
u8 res8[0xC];
u32 pecr1; /* PCI Express control register 1 */
+#ifdef CONFIG_MPC8308
+ u32 sdhccr; /* eSDHC Control Registers for MPC8308 */
+#else
u32 pecr2; /* PCI Express control register 2 */
+#endif
u8 res9[0xB8];
} sysconf83xx_t;
@@ -589,7 +593,14 @@
* SerDes
*/
typedef struct serdes83xx {
- u8 fixme[0x100];
+ u32 srdscr0;
+ u32 srdscr1;
+ u32 srdscr2;
+ u32 srdscr3;
+ u32 srdscr4;
+ u8 res0[0xc];
+ u32 srdsrstctl;
+ u8 res1[0xdc];
} serdes83xx_t;
/*
@@ -691,7 +702,7 @@
u8 res7[0xC0000];
} immap_t;
-#elif defined(CONFIG_MPC8315)
+#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
diff --git a/arch/powerpc/include/asm/mpc8xxx_spi.h b/arch/powerpc/include/asm/mpc8xxx_spi.h
index 41737d3..b0082af 100644
--- a/arch/powerpc/include/asm/mpc8xxx_spi.h
+++ b/arch/powerpc/include/asm/mpc8xxx_spi.h
@@ -27,9 +27,10 @@
#include <asm/types.h>
-#if defined(CONFIG_MPC834x) || \
+#if defined(CONFIG_MPC8308) || \
defined(CONFIG_MPC8313) || \
defined(CONFIG_MPC8315) || \
+ defined(CONFIG_MPC834x) || \
defined(CONFIG_MPC837x)
typedef struct spi8xxx {
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
index 54c0ffe..bb388ed 100644
--- a/board/LaCie/edminiv2/edminiv2.c
+++ b/board/LaCie/edminiv2/edminiv2.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <miiphy.h>
#include <asm/arch/orion5x.h>
+#include "edminiv2.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -90,3 +91,38 @@
return 0;
}
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+/* Configure and enable MV88E1116 PHY */
+void reset_phy(void)
+{
+ u16 reg;
+ u16 devadr;
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
+ printf("Err..%s could not read PHY dev address\n",
+ __func__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
+ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
+ printf("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
diff --git a/board/LaCie/edminiv2/edminiv2.h b/board/LaCie/edminiv2/edminiv2.h
new file mode 100644
index 0000000..88e62b2
--- /dev/null
+++ b/board/LaCie/edminiv2/edminiv2.h
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2009
+ * Net Insight <www.netinsight.net>
+ * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ *
+ * Based on sheevaplug.h:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __EDMINIV2_BASE_H
+#define __EDMINIV2_BASE_H
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+#endif /* __EDMINIV2_BASE_H */
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
index 4652672..3c37557 100644
--- a/board/afeb9260/afeb9260.c
+++ b/board/afeb9260/afeb9260.c
@@ -167,13 +167,6 @@
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
}
#endif
diff --git a/board/altera/ep1c20/ep1c20.c b/board/altera/ep1c20/ep1c20.c
deleted file mode 100644
index 82900f7..0000000
--- a/board/altera/ep1c20/ep1c20.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-int board_early_init_f (void)
-{
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("BOARD : Altera EP-1C20\n");
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/altera/ep1s10/Makefile b/board/altera/ep1s10/Makefile
deleted file mode 100644
index acad2aa..0000000
--- a/board/altera/ep1s10/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB = $(obj)lib$(BOARD).a
-
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-
-COBJS := $(BOARD).o $(COMOBJS)
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/ep1s10/config.mk b/board/altera/ep1s10/config.mk
deleted file mode 100644
index dab2740..0000000
--- a/board/altera/ep1s10/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x01fc0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/ep1s10/ep1s10.c b/board/altera/ep1s10/ep1s10.c
deleted file mode 100644
index cf886da..0000000
--- a/board/altera/ep1s10/ep1s10.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-int board_early_init_f (void)
-{
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("BOARD : Altera EP-1S10\n");
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/altera/ep1s40/Makefile b/board/altera/ep1s40/Makefile
deleted file mode 100644
index acad2aa..0000000
--- a/board/altera/ep1s40/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB = $(obj)lib$(BOARD).a
-
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-
-COBJS := $(BOARD).o $(COMOBJS)
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/ep1s40/config.mk b/board/altera/ep1s40/config.mk
deleted file mode 100644
index dab2740..0000000
--- a/board/altera/ep1s40/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x01fc0000
-
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/ep1s40/ep1s40.c b/board/altera/ep1s40/ep1s40.c
deleted file mode 100644
index 6395de7..0000000
--- a/board/altera/ep1s40/ep1s40.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-int checkboard (void)
-{
- puts ("BOARD : Altera EP-1S40\n");
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/altera/nios2-generic/custom_fpga.h b/board/altera/nios2-generic/custom_fpga.h
index 761f605..a11add5 100644
--- a/board/altera/nios2-generic/custom_fpga.h
+++ b/board/altera/nios2-generic/custom_fpga.h
@@ -35,6 +35,16 @@
#define CONFIG_SMC91111
#define CONFIG_SMC_USE_32_BIT
+/* epcs_controller.epcs_control_port is a altera_avalon_epcs_flash_controller */
+#define EPCS_CONTROLLER_REG_BASE 0x82100200
+#define CONFIG_SYS_ALTERA_SPI_LIST { EPCS_CONTROLLER_REG_BASE }
+#define CONFIG_ALTERA_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
/* jtag_uart.avalon_jtag_slave is a altera_avalon_jtag_uart */
#define CONFIG_SYS_JTAG_UART_BASE 0x821208b0
diff --git a/board/altera/nios2-generic/gpio.c b/board/altera/nios2-generic/gpio.c
index 6c9c6c2..d449684 100644
--- a/board/altera/nios2-generic/gpio.c
+++ b/board/altera/nios2-generic/gpio.c
@@ -15,6 +15,11 @@
static u32 pio_data_reg;
static u32 pio_dir_reg;
+int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
int gpio_direction_input(unsigned gpio)
{
u32 mask = 1 << gpio;
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 258d1ea..2ab8bc2 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -339,13 +339,6 @@
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
}
#endif
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index ed47360..64c6d17 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -179,13 +179,6 @@
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
}
#endif
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 5cd7aa7..91efc07 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -284,13 +284,6 @@
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
}
#endif
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 8fa0449..f92b20f 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -291,13 +291,6 @@
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
}
#endif
diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c
index 85b350f..ff1ac4c 100644
--- a/board/bf518f-ezbrd/bf518f-ezbrd.c
+++ b/board/bf518f-ezbrd/bf518f-ezbrd.c
@@ -14,6 +14,7 @@
#include <spi.h>
#include <asm/blackfin.h>
#include <asm/net.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/otp.h>
#include <asm/sdh.h>
@@ -61,6 +62,7 @@
#define KSZ_WRITE 0x02
#define KSZ_READ 0x03
+#define KSZ_REG_CHID 0x00 /* Register 0: Chip ID0 */
#define KSZ_REG_STPID 0x01 /* Register 1: Chip ID1 / Start Switch */
#define KSZ_REG_GC9 0x0b /* Register 11: Global Control 9 */
#define KSZ_REG_P3C0 0x30 /* Register 48: Port 3 Control 0 */
@@ -78,15 +80,17 @@
return ksz8893m_transfer(slave, KSZ_WRITE, reg, data, din);
}
+static int ksz8893m_reg_read(struct spi_slave *slave, uchar reg)
+{
+ int ret;
+ unsigned char din[3];
+ ret = ksz8893m_transfer(slave, KSZ_READ, reg, 0, din);
+ return ret ? ret : din[2];
+}
+
static int ksz8893m_reg_clear(struct spi_slave *slave, uchar reg, uchar mask)
{
- int ret = 0;
- unsigned char din[3];
-
- ret |= ksz8893m_transfer(slave, KSZ_READ, reg, 0, din);
- ret |= ksz8893m_reg_set(slave, reg, din[2] & mask);
-
- return ret;
+ return ksz8893m_reg_set(slave, reg, ksz8893m_reg_read(slave, reg) & mask);
}
static int ksz8893m_reset(struct spi_slave *slave)
@@ -107,16 +111,16 @@
int board_eth_init(bd_t *bis)
{
- static bool switch_is_alive = false;
+ static bool switch_is_alive = false, phy_is_ksz = true;
int ret;
if (!switch_is_alive) {
struct spi_slave *slave = spi_setup_slave(0, 1, KSZ_MAX_HZ, SPI_MODE_3);
if (slave) {
if (!spi_claim_bus(slave)) {
- ret = ksz8893m_reset(slave);
- if (!ret)
- switch_is_alive = true;
+ phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88);
+ ret = phy_is_ksz ? ksz8893m_reset(slave) : 0;
+ switch_is_alive = (ret == 0);
spi_release_bus(slave);
}
spi_free_slave(slave);
@@ -143,18 +147,11 @@
int board_early_init_f(void)
{
-#if !defined(CONFIG_SYS_NO_FLASH)
- /* setup BF518-EZBRD GPIO pin PG11 to AMS2. */
- bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2);
- bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG11);
-
-# if !defined(CONFIG_BFIN_SPI)
- /* setup BF518-EZBRD GPIO pin PG15 to AMS3. */
- bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_7_MASK) | PORT_x_MUX_7_FUNC_3);
- bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG15);
-# endif
-#endif
- return 0;
+ /* connect async banks by default */
+ const unsigned short pins[] = {
+ P_AMS2, P_AMS3, 0,
+ };
+ return peripheral_request_list(pins, "async");
}
#ifdef CONFIG_BFIN_SDH
diff --git a/board/bf526-ezbrd/Makefile b/board/bf526-ezbrd/Makefile
index a9ff760..f2bd2c2 100644
--- a/board/bf526-ezbrd/Makefile
+++ b/board/bf526-ezbrd/Makefile
@@ -30,7 +30,6 @@
LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o
-COBJS-$(CONFIG_STATUS_LED) += status-led.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/bf526-ezbrd/status-led.c b/board/bf526-ezbrd/status-led.c
deleted file mode 100644
index 6327022..0000000
--- a/board/bf526-ezbrd/status-led.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * U-boot - status leds
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <status_led.h>
-
-static void set_led_f(int pf, int state)
-{
- switch (state) {
- case STATUS_LED_OFF: bfin_write_PORTFIO_CLEAR(pf); break;
- case STATUS_LED_BLINKING: bfin_write_PORTFIO_TOGGLE(pf); break;
- case STATUS_LED_ON: bfin_write_PORTFIO_SET(pf); break;
- }
-}
-static void set_led_g(int pf, int state)
-{
- switch (state) {
- case STATUS_LED_OFF: bfin_write_PORTGIO_CLEAR(pf); break;
- case STATUS_LED_BLINKING: bfin_write_PORTGIO_TOGGLE(pf); break;
- case STATUS_LED_ON: bfin_write_PORTGIO_SET(pf); break;
- }
-}
-
-static void set_leds(led_id_t mask, int state)
-{
- if (mask & 0x1) set_led_f(PF8, state);
- if (mask & 0x2) set_led_g(PG11, state);
- if (mask & 0x4) set_led_g(PG12, state);
-}
-
-void __led_init(led_id_t mask, int state)
-{
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~(PF8));
- bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~(PG11 | PG12));
- bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() & ~(PF8));
- bfin_write_PORTGIO_INEN(bfin_read_PORTGIO_INEN() & ~(PG11 | PG12));
- bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() | (PF8));
- bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | (PG11 | PG12));
-}
-
-void __led_set(led_id_t mask, int state)
-{
- set_leds(mask, state);
-}
-
-void __led_toggle(led_id_t mask)
-{
- set_leds(mask, STATUS_LED_BLINKING);
-}
diff --git a/board/altera/ep1c20/Makefile b/board/bf527-ad7160-eval/Makefile
similarity index 77%
copy from board/altera/ep1c20/Makefile
copy to board/bf527-ad7160-eval/Makefile
index acad2aa..f2bd2c2 100644
--- a/board/altera/ep1c20/Makefile
+++ b/board/bf527-ad7160-eval/Makefile
@@ -1,5 +1,9 @@
#
-# (C) Copyright 2001-2006
+# U-boot - Makefile
+#
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,22 +26,17 @@
#
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
LIB = $(obj)lib$(BOARD).a
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
+COBJS-y := $(BOARD).o
-COBJS := $(BOARD).o $(COMOBJS)
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS-y))
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf527-ad7160-eval/bf527-ad7160-eval.c b/board/bf527-ad7160-eval/bf527-ad7160-eval.c
new file mode 100644
index 0000000..b06d5ab
--- /dev/null
+++ b/board/bf527-ad7160-eval/bf527-ad7160-eval.c
@@ -0,0 +1,25 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/pll.h>
+
+int checkboard(void)
+{
+ printf("Board: ADI BF527 AD7160-EVAL board\n");
+ printf(" Support: http://blackfin.uclinux.org/\n");
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ /* CLKIN Buffer Output Enable */
+ *pVR_CTL |= CLKBUFOE;
+ return 0;
+}
diff --git a/board/altera/ep1c20/config.mk b/board/bf527-ad7160-eval/config.mk
similarity index 68%
rename from board/altera/ep1c20/config.mk
rename to board/bf527-ad7160-eval/config.mk
index dab2740..f85bef5 100644
--- a/board/altera/ep1c20/config.mk
+++ b/board/bf527-ad7160-eval/config.mk
@@ -1,6 +1,8 @@
#
-# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -21,11 +23,11 @@
# MA 02111-1307 USA
#
-TEXT_BASE = 0x01fc0000
+# This is not actually used for Blackfin boards so do not change it
+#TEXT_BASE = do-not-use-me
-PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
-PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf527-ezkit/bf527-ezkit.c b/board/bf527-ezkit/bf527-ezkit.c
index a911880..211cf24 100644
--- a/board/bf527-ezkit/bf527-ezkit.c
+++ b/board/bf527-ezkit/bf527-ezkit.c
@@ -12,6 +12,7 @@
#include <net.h>
#include <netdev.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
#include <asm/net.h>
#include <asm/mach-common/bits/otp.h>
@@ -75,9 +76,7 @@
/*
* BF527 EZ-KITs require PG13 to be high for HOST mode
*/
- bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~PG13);
- bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | PG13);
- bfin_write_PORTGIO_SET(PG13);
- SSYNC();
+ gpio_request(GPIO_PG13, "musb-vbus");
+ gpio_direction_output(GPIO_PG13, 1);
}
#endif
diff --git a/board/bf527-ezkit/video.c b/board/bf527-ezkit/video.c
index 8f6ea23..891070b 100644
--- a/board/bf527-ezkit/video.c
+++ b/board/bf527-ezkit/video.c
@@ -11,6 +11,7 @@
#include <config.h>
#include <malloc.h>
#include <asm/blackfin.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/dma.h>
#include <spi.h>
#include <linux/types.h>
@@ -171,13 +172,11 @@
void Init_Ports(void)
{
- *pPORTF_MUX &= ~PORT_x_MUX_0_MASK;
- *pPORTF_MUX |= PORT_x_MUX_0_FUNC_1;
- *pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF7;
-
- *pPORTG_MUX &= ~PORT_x_MUX_1_MASK;
- *pPORTG_MUX |= PORT_x_MUX_1_FUNC_1;
- *pPORTG_FER |= PG5;
+ const unsigned short pins[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4,
+ P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_FS2, 0,
+ };
+ peripheral_request_list(pins, "lcd");
}
void Init_PPI(void)
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 4abad08..935aad2 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -27,8 +27,7 @@
#include <common.h>
#include <netdev.h>
-#include <asm/io.h>
-#include "bf533-stamp.h"
+#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -46,15 +45,10 @@
*/
void swap_to(int device_id)
{
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF1 | PF0);
- SSYNC();
- bfin_write_FIO_FLAG_C(PF1);
- if (device_id == ETHERNET)
- bfin_write_FIO_FLAG_S(PF0);
- else if (device_id == FLASH)
- bfin_write_FIO_FLAG_C(PF0);
- else
- printf("Unknown device to switch\n");
+ gpio_request(GPIO_PF0, "eth_flash_swap");
+ gpio_request(GPIO_PF1, "eth_flash_swap");
+ gpio_direction_output(GPIO_PF0, device_id == ETHERNET);
+ gpio_direction_output(GPIO_PF1, 0);
SSYNC();
}
@@ -75,24 +69,23 @@
#define STATUS_LED_OFF 0
#define STATUS_LED_ON 1
+static int gpio_setup;
+
static void stamp_led_set(int LED1, int LED2, int LED3)
{
- bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
-
- if (LED1 == STATUS_LED_OFF)
- *pFIO_FLAG_S = PF2;
- else
- *pFIO_FLAG_C = PF2;
- if (LED2 == STATUS_LED_OFF)
- *pFIO_FLAG_S = PF3;
- else
- *pFIO_FLAG_C = PF3;
- if (LED3 == STATUS_LED_OFF)
- *pFIO_FLAG_S = PF4;
- else
- *pFIO_FLAG_C = PF4;
- SSYNC();
+ if (!gpio_setup) {
+ gpio_request(GPIO_PF2, "boot_progress");
+ gpio_request(GPIO_PF3, "boot_progress");
+ gpio_request(GPIO_PF4, "boot_progress");
+ gpio_direction_output(GPIO_PF2, LED1);
+ gpio_direction_output(GPIO_PF3, LED2);
+ gpio_direction_output(GPIO_PF4, LED3);
+ gpio_setup = 1;
+ } else {
+ gpio_set_value(GPIO_PF2, LED1);
+ gpio_set_value(GPIO_PF3, LED2);
+ gpio_set_value(GPIO_PF4, LED3);
+ }
}
void show_boot_progress(int status)
@@ -134,43 +127,6 @@
}
#endif
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-
-static void set_led(int pf, int state)
-{
- switch (state) {
- case STATUS_LED_OFF: bfin_write_FIO_FLAG_S(pf); break;
- case STATUS_LED_BLINKING: bfin_write_FIO_FLAG_T(pf); break;
- case STATUS_LED_ON: bfin_write_FIO_FLAG_C(pf); break;
- }
-}
-
-static void set_leds(led_id_t mask, int state)
-{
- if (mask & 0x1) set_led(PF2, state);
- if (mask & 0x2) set_led(PF3, state);
- if (mask & 0x4) set_led(PF4, state);
-}
-
-void __led_init(led_id_t mask, int state)
-{
- bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
-}
-
-void __led_set(led_id_t mask, int state)
-{
- set_leds(mask, state);
-}
-
-void __led_toggle(led_id_t mask)
-{
- set_leds(mask, STATUS_LED_BLINKING);
-}
-
-#endif
-
#ifdef CONFIG_SMC91111
int board_eth_init(bd_t *bis)
{
diff --git a/board/bf533-stamp/bf533-stamp.h b/board/bf533-stamp/bf533-stamp.h
deleted file mode 100644
index ebd39c7..0000000
--- a/board/bf533-stamp/bf533-stamp.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * U-boot - stamp.h
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#ifndef __STAMP_H__
-#define __STAMP_H__
-
-extern void init_Flags(void);
-
-extern volatile unsigned long *ambctl0;
-extern volatile unsigned long *ambctl1;
-extern volatile unsigned long *amgctl;
-
-/* Definitions used in Compact Flash Boot support */
-#define FIO_EDGE_CF_BITS 0x0000
-#define FIO_POLAR_CF_BITS 0x0000
-#define FIO_EDGE_BITS 0x1E0
-#define FIO_POLAR_BITS 0x160
-
-/* Compact flash status bits in status register */
-#define CF_STAT_BITS 0x00000060
-
-/* CF Flags used to switch between expansion and external
- * memory banks
- */
-#define CF_PF0 0x0001
-#define CF_PF1 0x0002
-#define CF_PF1_PF0 0x0003
-
-#endif
diff --git a/board/bf533-stamp/ide-cf.c b/board/bf533-stamp/ide-cf.c
index 23e786b..3e4080e 100644
--- a/board/bf533-stamp/ide-cf.c
+++ b/board/bf533-stamp/ide-cf.c
@@ -11,7 +11,6 @@
#include <common.h>
#include <config.h>
#include <asm/blackfin.h>
-#include "bf533-stamp.h"
void cf_outb(unsigned char val, volatile unsigned char *addr)
{
@@ -66,6 +65,15 @@
swap_to(FLASH);
}
+/* Definitions used in Compact Flash Boot support */
+#define FIO_EDGE_CF_BITS 0x0000
+#define FIO_POLAR_CF_BITS 0x0000
+#define FIO_EDGE_BITS 0x1E0
+#define FIO_POLAR_BITS 0x160
+
+/* Compact flash status bits in status register */
+#define CF_STAT_BITS 0x00000060
+
void cf_ide_init(void)
{
int i, cf_stat;
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index f728e2c..4f8985b 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -29,9 +29,8 @@
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o cmd_bf537led.o
+COBJS-y := $(BOARD).o
COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o
-COBJS-$(CONFIG_CMD_EEPROM) += spi_flash.o
COBJS-$(CONFIG_POST) += post.o post-memory.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index 3911be6..ec888d4 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -46,11 +46,8 @@
void board_reset(void)
{
/* workaround for weak pull ups on ssel */
- if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~PF10);
- bfin_write_PORTFIO_SET(PF10);
- udelay(1);
- }
+ if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+ bfin_reset_boot_spi_cs(GPIO_PF10);
}
#ifdef CONFIG_BFIN_MAC
diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c
deleted file mode 100644
index 7d8f3ea..0000000
--- a/board/bf537-stamp/cmd_bf537led.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * U-boot - cmd_bf537led.c
- *
- * Copyright (C) 2006 Aaron Gage, Ocean Optics Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <asm/string.h>
-#ifdef CONFIG_BF537_STAMP_LEDCMD
-
-/* Define the command usage in a reusable way */
-#define USAGE_LONG \
- "led <number> <action>\n" \
- " <number> - Index (0-5) of LED to change, or \"all\"\n" \
- " <action> - Must be one of:\n" \
- " on off toggle"
-
-/* Number of LEDs supported by the board */
-#define NUMBER_LEDS 6
-/* The BF537 stamp has 6 LEDs. This mask indicates that all should be lit. */
-#define LED_ALL_MASK 0x003F
-
-void show_cmd_usage(void);
-void set_led_state(int index, int state);
-void configure_GPIO_to_output(int index);
-
-/* Map of LEDs according to their GPIO ports. This can be rearranged or
- * otherwise changed to account for different GPIO configurations.
- */
-int led_ports[] = { PF6, PF7, PF8, PF9, PF10, PF11 };
-
-#define ACTION_TOGGLE -1
-#define ACTION_OFF 0
-#define ACTION_ON 1
-
-#define LED_STATE_OFF 0
-#define LED_STATE_ON 1
-
-/* This is a trivial atoi implementation since we don't have one available */
-int atoi(char *string)
-{
- int length;
- int retval = 0;
- int i;
- int sign = 1;
-
- length = strlen(string);
- for (i = 0; i < length; i++) {
- if (0 == i && string[0] == '-') {
- sign = -1;
- continue;
- }
- if (string[i] > '9' || string[i] < '0') {
- break;
- }
- retval *= 10;
- retval += string[i] - '0';
- }
- retval *= sign;
- return retval;
-}
-
-int do_bf537led(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- int led_mask = 0;
- int led_current_state = 0;
- int action = ACTION_OFF;
- int temp;
-
- if (3 != argc) {
- /* Not enough arguments, so just show usage information */
- show_cmd_usage();
- return 1;
- }
-
- if (strcmp(argv[1], "all") == 0) {
- led_mask = LED_ALL_MASK;
- } else {
- temp = atoi(argv[1]);
- if (temp < 0 || temp >= NUMBER_LEDS) {
- printf("Invalid LED number [%s]\n", argv[1]);
- show_cmd_usage();
- return 2;
- }
- led_mask |= (1 << temp);
- }
-
- if (strcmp(argv[2], "off") == 0) {
- action = ACTION_OFF;
- } else if (strcmp(argv[2], "on") == 0) {
- action = ACTION_ON;
- } else if (strcmp(argv[2], "toggle") == 0) {
- action = ACTION_TOGGLE;
- } else {
- printf("Invalid action [%s]\n", argv[2]);
- show_cmd_usage();
- return 3;
- }
-
- for (temp = 0; temp < NUMBER_LEDS; temp++) {
- if ((led_mask & (1 << temp)) > 0) {
- /*
- * It is possible that the user has wired one of PF6-PF11 to
- * something other than an LED, so this will only change a pin
- * to output if the user has indicated a state change. This may
- * happen a lot, but this way is safer than just setting all pins
- * to output.
- */
- configure_GPIO_to_output(temp);
-
- led_current_state =
- ((*pPORTFIO & led_ports[temp]) >
- 0) ? LED_STATE_ON : LED_STATE_OFF;
- /*
- printf("LED state for index %d (%x) is %d\n", temp, led_ports[temp],
- led_current_state);
- printf("*pPORTFIO is %x\n", *pPORTFIO);
- */
- if (ACTION_ON == action
- || (ACTION_TOGGLE == action
- && 0 == led_current_state)) {
- printf("Turning LED %d on\n", temp);
- set_led_state(temp, LED_STATE_ON);
- } else {
- printf("Turning LED %d off\n", temp);
- set_led_state(temp, LED_STATE_OFF);
- }
- }
- }
-
- return 0;
-}
-
-/*
- * The GPIO pins that go to the LEDs on the BF537 stamp must be configured
- * as output. This function simply configures them that way. This could
- * be done to all of the GPIO lines at once, but if a user is using a
- * custom board, this will try to be nice and only change the GPIO lines
- * that the user specifically names.
- */
-void configure_GPIO_to_output(int index)
-{
- int port;
-
- port = led_ports[index];
-
- /* Clear the Port F Function Enable Register */
- *pPORTF_FER &= ~port;
- /* Set the Port F I/O direction register */
- *pPORTFIO_DIR |= port;
- /* Clear the Port F I/O Input Enable Register */
- *pPORTFIO_INEN &= ~port;
-}
-
-/* Enforce the given state on the GPIO line for the indicated LED */
-void set_led_state(int index, int state)
-{
- int port;
-
- port = led_ports[index];
-
- if (LED_STATE_OFF == state) {
- /* Clear the bit to turn off the LED */
- *pPORTFIO &= ~port;
- } else {
- /* Set the bit to turn on the LED */
- *pPORTFIO |= port;
- }
-}
-
-/* Display usage information */
-void show_cmd_usage()
-{
- printf("Usage:\n%s\n", USAGE_LONG);
-}
-
-/* Register information for u-boot to find this command */
-U_BOOT_CMD(led, 3, 1, do_bf537led,
- "Control BF537 stamp LEDs", USAGE_LONG);
-
-#endif
diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
deleted file mode 100644
index 7b753ad..0000000
--- a/board/bf537-stamp/spi_flash.c
+++ /dev/null
@@ -1,996 +0,0 @@
-/*
- * SPI flash driver
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-/* Configuration options:
- * CONFIG_SPI_BAUD - value to load into SPI_BAUD (divisor of SCLK to get SPI CLK)
- * CONFIG_SPI_FLASH_SLOW_READ - force usage of the slower read
- * WARNING: make sure your SCLK + SPI_BAUD is slow enough
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/mach-common/bits/spi.h>
-#include <asm/mach-common/bits/dma.h>
-
-/* Forcibly phase out these */
-#ifdef CONFIG_SPI_FLASH_NUM_SECTORS
-# error do not set CONFIG_SPI_FLASH_NUM_SECTORS
-#endif
-#ifdef CONFIG_SPI_FLASH_SECTOR_SIZE
-# error do not set CONFIG_SPI_FLASH_SECTOR_SIZE
-#endif
-
-#if defined(CONFIG_SPI)
-
-struct flash_info {
- char *name;
- uint16_t id;
- uint16_t ext_id;
- unsigned sector_size;
- unsigned num_sectors;
-};
-
-/* SPI Speeds: 50 MHz / 33 MHz */
-static struct flash_info flash_spansion_serial_flash[] = {
- { "S25FL016", 0x0215, 0, 64 * 1024, 32 },
- { "S25FL032", 0x0216, 0, 64 * 1024, 64 },
- { "S25FL064", 0x0217, 0, 64 * 1024, 128 },
- { "S25FL128-00", 0x2018, 0x0301, 64 * 1024, 256 }, /* Package marking FL128PIF */
- { "S25FL128-01", 0x2018, 0x0300, 128 * 1024, 64 }, /* Package marking FL128PIFL */
- { NULL, 0, 0, 0, 0 }
-};
-
-/* SPI Speeds: 50 MHz / 20 MHz */
-static struct flash_info flash_st_serial_flash[] = {
- { "m25p05", 0x2010, 0, 32 * 1024, 2 },
- { "m25p10", 0x2011, 0, 32 * 1024, 4 },
- { "m25p20", 0x2012, 0, 64 * 1024, 4 },
- { "m25p40", 0x2013, 0, 64 * 1024, 8 },
- { "m25p80", 0x20FF, 0, 64 * 1024, 16 },
- { "m25p16", 0x2015, 0, 64 * 1024, 32 },
- { "m25p32", 0x2016, 0, 64 * 1024, 64 },
- { "m25p64", 0x2017, 0, 64 * 1024, 128 },
- { "m25p128", 0x2018, 0, 256 * 1024, 64 },
- { NULL, 0, 0, 0, 0 }
-};
-
-/* SPI Speeds: 20 MHz / 40 MHz */
-static struct flash_info flash_sst_serial_flash[] = {
- { "SST25WF512", 0x2501, 0, 4 * 1024, 128 },
- { "SST25WF010", 0x2502, 0, 4 * 1024, 256 },
- { "SST25WF020", 0x2503, 0, 4 * 1024, 512 },
- { "SST25WF040", 0x2504, 0, 4 * 1024, 1024 },
- { NULL, 0, 0, 0, 0 }
-};
-
-/* SPI Speeds: 66 MHz / 33 MHz */
-static struct flash_info flash_atmel_dataflash[] = {
- { "AT45DB011x", 0x0c, 0, 264, 512 },
- { "AT45DB021x", 0x14, 0, 264, 1025 },
- { "AT45DB041x", 0x1c, 0, 264, 2048 },
- { "AT45DB081x", 0x24, 0, 264, 4096 },
- { "AT45DB161x", 0x2c, 0, 528, 4096 },
- { "AT45DB321x", 0x34, 0, 528, 8192 },
- { "AT45DB642x", 0x3c, 0, 1056, 8192 },
- { NULL, 0, 0, 0, 0 }
-};
-
-/* SPI Speed: 50 MHz / 25 MHz or 40 MHz / 20 MHz */
-static struct flash_info flash_winbond_serial_flash[] = {
- { "W25X10", 0x3011, 0, 16 * 256, 32 },
- { "W25X20", 0x3012, 0, 16 * 256, 64 },
- { "W25X40", 0x3013, 0, 16 * 256, 128 },
- { "W25X80", 0x3014, 0, 16 * 256, 256 },
- { "W25P80", 0x2014, 0, 256 * 256, 16 },
- { "W25P16", 0x2015, 0, 256 * 256, 32 },
- { NULL, 0, 0, 0, 0 }
-};
-
-struct flash_ops {
- uint8_t read, write, erase, status;
-};
-
-#ifdef CONFIG_SPI_FLASH_SLOW_READ
-# define OP_READ 0x03
-#else
-# define OP_READ 0x0B
-#endif
-static struct flash_ops flash_st_ops = {
- .read = OP_READ,
- .write = 0x02,
- .erase = 0xD8,
- .status = 0x05,
-};
-
-static struct flash_ops flash_sst_ops = {
- .read = OP_READ,
- .write = 0x02,
- .erase = 0x20,
- .status = 0x05,
-};
-
-static struct flash_ops flash_atmel_ops = {
- .read = OP_READ,
- .write = 0x82,
- .erase = 0x81,
- .status = 0xD7,
-};
-
-static struct flash_ops flash_winbond_ops = {
- .read = OP_READ,
- .write = 0x02,
- .erase = 0x20,
- .status = 0x05,
-};
-
-struct manufacturer_info {
- const char *name;
- uint8_t id;
- struct flash_info *flashes;
- struct flash_ops *ops;
-};
-
-static struct {
- struct manufacturer_info *manufacturer;
- struct flash_info *flash;
- struct flash_ops *ops;
- uint8_t manufacturer_id, device_id1, device_id2, device_extid1, device_extid2;
- unsigned int write_length;
- unsigned long sector_size, num_sectors;
-} flash;
-
-enum {
- JED_MANU_SPANSION = 0x01,
- JED_MANU_ST = 0x20,
- JED_MANU_SST = 0xBF,
- JED_MANU_ATMEL = 0x1F,
- JED_MANU_WINBOND = 0xEF,
-};
-
-static struct manufacturer_info flash_manufacturers[] = {
- {
- .name = "Spansion",
- .id = JED_MANU_SPANSION,
- .flashes = flash_spansion_serial_flash,
- .ops = &flash_st_ops,
- },
- {
- .name = "ST",
- .id = JED_MANU_ST,
- .flashes = flash_st_serial_flash,
- .ops = &flash_st_ops,
- },
- {
- .name = "SST",
- .id = JED_MANU_SST,
- .flashes = flash_sst_serial_flash,
- .ops = &flash_sst_ops,
- },
- {
- .name = "Atmel",
- .id = JED_MANU_ATMEL,
- .flashes = flash_atmel_dataflash,
- .ops = &flash_atmel_ops,
- },
- {
- .name = "Winbond",
- .id = JED_MANU_WINBOND,
- .flashes = flash_winbond_serial_flash,
- .ops = &flash_winbond_ops,
- },
-};
-
-#define TIMEOUT 5000 /* timeout of 5 seconds */
-
-/* If part has multiple SPI flashes, assume SPI0 as that is
- * the one we can boot off of ...
- */
-#ifndef pSPI_CTL
-# define pSPI_CTL pSPI0_CTL
-# define pSPI_BAUD pSPI0_BAUD
-# define pSPI_FLG pSPI0_FLG
-# define pSPI_RDBR pSPI0_RDBR
-# define pSPI_STAT pSPI0_STAT
-# define pSPI_TDBR pSPI0_TDBR
-#endif
-
-/* Default to the SPI SSEL that we boot off of:
- * BF54x, BF537, (everything new?): SSEL1
- * BF51x, BF533, BF561: SSEL2
- */
-#ifndef CONFIG_SPI_FLASH_SSEL
-# define CONFIG_SPI_FLASH_SSEL BFIN_BOOT_SPI_SSEL
-#endif
-#define SSEL_MASK (1 << CONFIG_SPI_FLASH_SSEL)
-
-static void SPI_INIT(void)
-{
- /* [#3541] This delay appears to be necessary, but not sure
- * exactly why as the history behind it is non-existant.
- */
- *pSPI_CTL = 0;
- udelay(CONFIG_CCLK_HZ / 25000000);
-
- /* enable SPI pins: SSEL, MOSI, MISO, SCK */
-#ifdef __ADSPBF54x__
- *pPORTE_FER |= (PE0 | PE1 | PE2 | PE4);
-#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
- *pPORTF_FER |= (PF10 | PF11 | PF12 | PF13);
-#elif defined(__ADSPBF52x__)
- bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_3);
- bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG1 | PG2 | PG3 | PG4);
-#elif defined(__ADSPBF51x__)
- bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_7_MASK) | PORT_x_MUX_7_FUNC_1);
- bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG12 | PG13 | PG14 | PG15);
-#endif
-
- /* initate communication upon write of TDBR */
- *pSPI_CTL = (SPE | MSTR | CPHA | CPOL | TDBR_CORE);
- *pSPI_BAUD = CONFIG_SPI_BAUD;
-}
-
-static void SPI_DEINIT(void)
-{
- *pSPI_CTL = 0;
- *pSPI_BAUD = 0;
- SSYNC();
-}
-
-static void SPI_ON(void)
-{
- /* toggle SSEL to reset the device so it'll take a new command */
- *pSPI_FLG = 0xFF00 | SSEL_MASK;
- SSYNC();
-
- *pSPI_FLG = ((0xFF & ~SSEL_MASK) << 8) | SSEL_MASK;
- SSYNC();
-}
-
-static void SPI_OFF(void)
-{
- /* put SPI settings back to reset state */
- *pSPI_FLG = 0xFF00;
- SSYNC();
-}
-
-static uint8_t spi_write_read_byte(uint8_t transmit)
-{
- *pSPI_TDBR = transmit;
- SSYNC();
-
- while ((*pSPI_STAT & TXS))
- if (ctrlc())
- break;
- while (!(*pSPI_STAT & SPIF))
- if (ctrlc())
- break;
- while (!(*pSPI_STAT & RXS))
- if (ctrlc())
- break;
-
- /* Read dummy to empty the receive register */
- return *pSPI_RDBR;
-}
-
-static uint8_t read_status_register(void)
-{
- uint8_t status_register;
-
- /* send instruction to read status register */
- SPI_ON();
- spi_write_read_byte(flash.ops->status);
- /* send dummy to receive the status register */
- status_register = spi_write_read_byte(0);
- SPI_OFF();
-
- return status_register;
-}
-
-static int wait_for_ready_status(void)
-{
- ulong start = get_timer(0);
-
- while (get_timer(0) - start < TIMEOUT) {
- switch (flash.manufacturer_id) {
- case JED_MANU_SPANSION:
- case JED_MANU_ST:
- case JED_MANU_SST:
- case JED_MANU_WINBOND:
- if (!(read_status_register() & 0x01))
- return 0;
- break;
-
- case JED_MANU_ATMEL:
- if (read_status_register() & 0x80)
- return 0;
- break;
- }
-
- if (ctrlc()) {
- puts("\nAbort\n");
- return -1;
- }
- }
-
- puts("Timeout\n");
- return -1;
-}
-
-static int enable_writing(void)
-{
- ulong start;
-
- if (flash.manufacturer_id == JED_MANU_ATMEL)
- return 0;
-
- /* A write enable instruction must previously have been executed */
- SPI_ON();
- spi_write_read_byte(0x06);
- SPI_OFF();
-
- /* The status register will be polled to check the write enable latch "WREN" */
- start = get_timer(0);
- while (get_timer(0) - start < TIMEOUT) {
- if (read_status_register() & 0x02)
- return 0;
-
- if (ctrlc()) {
- puts("\nAbort\n");
- return -1;
- }
- }
-
- puts("Timeout\n");
- return -1;
-}
-
-static void write_status_register(uint8_t val)
-{
- if (flash.manufacturer_id != JED_MANU_SST)
- hang();
-
- if (enable_writing())
- return;
-
- /* send instruction to write status register */
- SPI_ON();
- spi_write_read_byte(0x01);
- /* and clear it! */
- spi_write_read_byte(val);
- SPI_OFF();
-}
-
-/* Request and read the manufacturer and device id of parts which
- * are compatible with the JEDEC standard (JEP106) and use that to
- * setup other operating conditions.
- */
-static int spi_detect_part(void)
-{
- uint16_t dev_id, dev_extid;
- size_t i;
-
- static char called_init;
- if (called_init)
- return 0;
-
-#ifdef CONFIG_SPI_FLASH_M25P80
- flash.manufacturer_id = JED_MANU_ST;
- flash.device_id1 = 0x20;
- flash.device_id2 = 0xFF;
-#else
- SPI_ON();
-
- /* Send the request for the part identification */
- spi_write_read_byte(0x9F);
-
- /* Now read in the manufacturer id bytes */
- do {
- flash.manufacturer_id = spi_write_read_byte(0);
- if (flash.manufacturer_id == 0x7F)
- puts("Warning: unhandled manufacturer continuation byte!\n");
- } while (flash.manufacturer_id == 0x7F);
-
- /* Now read in the first device id byte */
- flash.device_id1 = spi_write_read_byte(0);
-
- /* Now read in the second device id byte */
- flash.device_id2 = spi_write_read_byte(0);
-
- /* Read extended device ids */
- flash.device_extid1 = spi_write_read_byte(0);
- flash.device_extid2 = spi_write_read_byte(0);
-
- SPI_OFF();
-#endif
-
- dev_id = (flash.device_id1 << 8) | flash.device_id2;
- dev_extid = (flash.device_extid1 << 8) | flash.device_extid2;
-
- for (i = 0; i < ARRAY_SIZE(flash_manufacturers); ++i) {
- if (flash.manufacturer_id == flash_manufacturers[i].id)
- break;
- }
- if (i == ARRAY_SIZE(flash_manufacturers))
- goto unknown;
-
- flash.manufacturer = &flash_manufacturers[i];
- flash.ops = flash_manufacturers[i].ops;
-
- switch (flash.manufacturer_id) {
- case JED_MANU_SPANSION:
- case JED_MANU_ST:
- case JED_MANU_SST:
- case JED_MANU_WINBOND:
- for (i = 0; flash.manufacturer->flashes[i].name; ++i) {
- if (dev_id == flash.manufacturer->flashes[i].id &&
- (flash.manufacturer->flashes[i].ext_id == 0 ||
- flash.manufacturer->flashes[i].ext_id == dev_extid))
- break;
- }
- if (!flash.manufacturer->flashes[i].name)
- goto unknown;
-
- flash.flash = &flash.manufacturer->flashes[i];
- flash.sector_size = flash.flash->sector_size;
- flash.num_sectors = flash.flash->num_sectors;
-
- if (flash.manufacturer_id == JED_MANU_SST)
- flash.write_length = 1; /* pwnt :( */
- else
- flash.write_length = 256;
- break;
-
- case JED_MANU_ATMEL: {
- uint8_t status = read_status_register();
-
- for (i = 0; flash.manufacturer->flashes[i].name; ++i) {
- if ((status & 0x3c) == flash.manufacturer->flashes[i].id)
- break;
- }
- if (!flash.manufacturer->flashes[i].name)
- goto unknown;
-
- flash.flash = &flash.manufacturer->flashes[i];
- flash.sector_size = flash.flash->sector_size;
- flash.num_sectors = flash.flash->num_sectors;
-
- /* see if flash is in "power of 2" mode */
- if (status & 0x1)
- flash.sector_size &= ~(1 << (ffs(flash.sector_size) - 1));
-
- flash.write_length = flash.sector_size;
- break;
- }
- }
-
- /* the SST parts power up with software protection enabled by default */
- if (flash.manufacturer_id == JED_MANU_SST)
- write_status_register(0);
-
- called_init = 1;
- return 0;
-
- unknown:
- printf("Unknown SPI device: 0x%02X 0x%02X 0x%02X\n",
- flash.manufacturer_id, flash.device_id1, flash.device_id2);
- return 1;
-}
-
-/*
- * Function: spi_init_f
- * Description: Init SPI-Controller (ROM part)
- * return: ---
- */
-void spi_init_f(void)
-{
-}
-
-/*
- * Function: spi_init_r
- * Description: Init SPI-Controller (RAM part) -
- * The malloc engine is ready and we can move our buffers to
- * normal RAM
- * return: ---
- */
-void spi_init_r(void)
-{
-#if defined(CONFIG_POST) && (CONFIG_POST & CONFIG_SYS_POST_SPI)
- /* Our testing strategy here is pretty basic:
- * - fill src memory with an 8-bit pattern
- * - write the src memory to the SPI flash
- * - read the SPI flash into the dst memory
- * - compare src and dst memory regions
- * - repeat a few times
- * The variations we test for:
- * - change the 8-bit pattern a bit
- * - change the read/write block size so we know:
- * - writes smaller/equal/larger than the buffer work
- * - writes smaller/equal/larger than the sector work
- * - change the SPI offsets so we know:
- * - writing partial sectors works
- */
- uint8_t *mem_src, *mem_dst;
- size_t i, c, l, o;
- size_t test_count, errors;
- uint8_t pattern;
-
- SPI_INIT();
-
- if (spi_detect_part())
- goto out;
- eeprom_info();
-
- ulong lengths[] = {
- flash.write_length,
- flash.write_length * 2,
- flash.write_length / 2,
- flash.sector_size,
- flash.sector_size * 2,
- flash.sector_size / 2
- };
- ulong offsets[] = {
- 0,
- flash.write_length,
- flash.write_length * 2,
- flash.write_length / 2,
- flash.write_length / 4,
- flash.sector_size,
- flash.sector_size * 2,
- flash.sector_size / 2,
- flash.sector_size / 4,
- };
-
- /* the exact addresses are arbitrary ... they just need to not overlap */
- mem_src = (void *)(0);
- mem_dst = (void *)(max(flash.write_length, flash.sector_size) * 2);
-
- test_count = 0;
- errors = 0;
- pattern = 0x00;
-
- for (i = 0; i < 16; ++i) { /* 16 = 8 bits * 2 iterations */
- for (l = 0; l < ARRAY_SIZE(lengths); ++l) {
- for (o = 0; o < ARRAY_SIZE(offsets); ++o) {
- ulong len = lengths[l];
- ulong off = offsets[o];
-
- printf("Testing pattern 0x%02X of length %5lu and offset %5lu: ", pattern, len, off);
-
- /* setup the source memory region */
- memset(mem_src, pattern, len);
-
- test_count += 4;
- for (c = 0; c < 4; ++c) { /* 4 is just a random repeat count */
- if (ctrlc()) {
- puts("\nAbort\n");
- goto out;
- }
-
- /* make sure background fill pattern != pattern */
- memset(mem_dst, pattern ^ 0xFF, len);
-
- /* write out the source memory and then read it back and compare */
- eeprom_write(0, off, mem_src, len);
- eeprom_read(0, off, mem_dst, len);
-
- if (memcmp(mem_src, mem_dst, len)) {
- for (c = 0; c < len; ++c)
- if (mem_src[c] != mem_dst[c])
- break;
- printf(" FAIL @ offset %u, skipping repeats ", c);
- ++errors;
- break;
- }
-
- /* XXX: should shrink write region here to test with
- * leading/trailing canaries so we know surrounding
- * bytes don't get screwed.
- */
- }
- puts("\n");
- }
- }
-
- /* invert the pattern every other run and shift out bits slowly */
- pattern ^= 0xFF;
- if (i % 2)
- pattern = (pattern | 0x01) << 1;
- }
-
- if (errors)
- printf("SPI FAIL: Out of %i tests, there were %i errors ;(\n", test_count, errors);
- else
- printf("SPI PASS: %i tests worked!\n", test_count);
-
- out:
- SPI_DEINIT();
-
-#endif
-}
-
-static void transmit_address(uint32_t addr)
-{
- /* Send the highest byte of the 24 bit address at first */
- spi_write_read_byte(addr >> 16);
- /* Send the middle byte of the 24 bit address at second */
- spi_write_read_byte(addr >> 8);
- /* Send the lowest byte of the 24 bit address finally */
- spi_write_read_byte(addr);
-}
-
-/*
- * Read a value from flash for verify purpose
- * Inputs: unsigned long ulStart - holds the SPI start address
- * int pnData - pointer to store value read from flash
- * long lCount - number of elements to read
- */
-#ifdef CONFIG_SPI_READFLASH_NODMA
-static int read_flash(unsigned long address, long count, uchar *buffer)
-{
- size_t i, j;
-
- /* Send the read command to SPI device */
- SPI_ON();
- spi_write_read_byte(flash.ops->read);
- transmit_address(address);
-
-#ifndef CONFIG_SPI_FLASH_SLOW_READ
- /* Send dummy byte when doing SPI fast reads */
- spi_write_read_byte(0);
-#endif
-
- /* After the SPI device address has been placed on the MOSI pin the data can be */
- /* received on the MISO pin. */
- j = flash.sector_size << 1;
- for (i = 1; i <= count; ++i) {
- *buffer++ = spi_write_read_byte(0);
- if (!j--) {
- puts(".");
- j = flash.sector_size;
- }
- }
-
- SPI_OFF();
-
- return 0;
-}
-#else
-
-#ifdef __ADSPBF54x__
-#define bfin_write_DMA_SPI_IRQ_STATUS bfin_write_DMA4_IRQ_STATUS
-#define bfin_read_DMA_SPI_IRQ_STATUS bfin_read_DMA4_IRQ_STATUS
-#define bfin_write_DMA_SPI_CURR_DESC_PTR bfin_write_DMA4_CURR_DESC_PTR
-#define bfin_write_DMA_SPI_CONFIG bfin_write_DMA4_CONFIG
-#elif defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) || \
- defined(__ADSPBF538__) || defined(__ADSPBF539__)
-#define bfin_write_DMA_SPI_IRQ_STATUS bfin_write_DMA5_IRQ_STATUS
-#define bfin_read_DMA_SPI_IRQ_STATUS bfin_read_DMA5_IRQ_STATUS
-#define bfin_write_DMA_SPI_CURR_DESC_PTR bfin_write_DMA5_CURR_DESC_PTR
-#define bfin_write_DMA_SPI_CONFIG bfin_write_DMA5_CONFIG
-#elif defined(__ADSPBF561__)
-#define bfin_write_DMA_SPI_IRQ_STATUS bfin_write_DMA16_IRQ_STATUS
-#define bfin_read_DMA_SPI_IRQ_STATUS bfin_read_DMA16_IRQ_STATUS
-#define bfin_write_DMA_SPI_CURR_DESC_PTR bfin_write_DMA16_CURR_DESC_PTR
-#define bfin_write_DMA_SPI_CONFIG bfin_write_DMA16_CONFIG
-#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \
- defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
-#define bfin_write_DMA_SPI_IRQ_STATUS bfin_write_DMA7_IRQ_STATUS
-#define bfin_read_DMA_SPI_IRQ_STATUS bfin_read_DMA7_IRQ_STATUS
-#define bfin_write_DMA_SPI_CURR_DESC_PTR bfin_write_DMA7_CURR_DESC_PTR
-#define bfin_write_DMA_SPI_CONFIG bfin_write_DMA7_CONFIG
-#else
-#error "Please provide SPI DMA channel defines"
-#endif
-
-struct dmadesc_array {
- unsigned long start_addr;
- unsigned short cfg;
- unsigned short x_count;
- short x_modify;
- unsigned short y_count;
- short y_modify;
-} __attribute__((packed));
-
-/*
- * Read a value from flash for verify purpose
- * Inputs: unsigned long ulStart - holds the SPI start address
- * int pnData - pointer to store value read from flash
- * long lCount - number of elements to read
- */
-
-static int read_flash(unsigned long address, long count, uchar *buffer)
-{
- unsigned int ndsize;
- struct dmadesc_array dma[2];
- /* Send the read command to SPI device */
-
- if (!count)
- return 0;
-
- dma[0].start_addr = (unsigned long)buffer;
- dma[0].x_modify = 1;
- if (count <= 65536) {
- blackfin_dcache_flush_invalidate_range(buffer, buffer + count);
- ndsize = NDSIZE_5;
- dma[0].cfg = NDSIZE_0 | WNR | WDSIZE_8 | FLOW_STOP | DMAEN | DI_EN;
- dma[0].x_count = count;
- } else {
- blackfin_dcache_flush_invalidate_range(buffer, buffer + 65536 - 1);
- ndsize = NDSIZE_7;
- dma[0].cfg = NDSIZE_5 | WNR | WDSIZE_8 | FLOW_ARRAY | DMAEN | DMA2D;
- dma[0].x_count = 0; /* 2^16 */
- dma[0].y_count = count >> 16; /* count / 2^16 */
- dma[0].y_modify = 1;
- dma[1].start_addr = (unsigned long)(buffer + (count & ~0xFFFF));
- dma[1].cfg = NDSIZE_0 | WNR | WDSIZE_8 | FLOW_STOP | DMAEN | DI_EN;
- dma[1].x_count = count & 0xFFFF; /* count % 2^16 */
- dma[1].x_modify = 1;
- }
-
- bfin_write_DMA_SPI_CONFIG(0);
- bfin_write_DMA_SPI_IRQ_STATUS(DMA_DONE | DMA_ERR);
- bfin_write_DMA_SPI_CURR_DESC_PTR(dma);
-
- SPI_ON();
-
- spi_write_read_byte(flash.ops->read);
- transmit_address(address);
-
-#ifndef CONFIG_SPI_FLASH_SLOW_READ
- /* Send dummy byte when doing SPI fast reads */
- spi_write_read_byte(0);
-#endif
-
- bfin_write_DMA_SPI_CONFIG(ndsize | FLOW_ARRAY | DMAEN);
- *pSPI_CTL = (MSTR | CPHA | CPOL | RDBR_DMA | SPE | SZ);
- SSYNC();
-
- /*
- * We already invalidated the first 64k,
- * now while we just wait invalidate the remaining part.
- * Its not likely that the DMA is going to overtake
- */
- if (count > 65536)
- blackfin_dcache_flush_invalidate_range(buffer + 65536,
- buffer + count);
-
- while (!(bfin_read_DMA_SPI_IRQ_STATUS() & DMA_DONE))
- if (ctrlc())
- break;
-
- SPI_OFF();
-
- *pSPI_CTL = 0;
-
- bfin_write_DMA_SPI_CONFIG(0);
-
- *pSPI_CTL = (SPE | MSTR | CPHA | CPOL | TDBR_CORE);
-
- return 0;
-}
-#endif
-
-static long address_to_sector(unsigned long address)
-{
- if (address > (flash.num_sectors * flash.sector_size) - 1)
- return -1;
- return address / flash.sector_size;
-}
-
-static int erase_sector(int address)
-{
- /* sector gets checked in higher function, so assume it's valid
- * here and figure out the offset of the sector in flash
- */
- if (enable_writing())
- return -1;
-
- /*
- * Send the erase block command to the flash followed by the 24 address
- * to point to the start of a sector
- */
- SPI_ON();
- spi_write_read_byte(flash.ops->erase);
- transmit_address(address);
- SPI_OFF();
-
- return wait_for_ready_status();
-}
-
-/* Write [count] bytes out of [buffer] into the given SPI [address] */
-static long write_flash(unsigned long address, long count, uchar *buffer)
-{
- long i, write_buffer_size;
-
- if (enable_writing())
- return -1;
-
- /* Send write command followed by the 24 bit address */
- SPI_ON();
- spi_write_read_byte(flash.ops->write);
- transmit_address(address);
-
- /* Shoot out a single write buffer */
- write_buffer_size = min(count, flash.write_length);
- for (i = 0; i < write_buffer_size; ++i)
- spi_write_read_byte(buffer[i]);
-
- SPI_OFF();
-
- /* Wait for the flash to do its thing */
- if (wait_for_ready_status()) {
- puts("SPI Program Time out! ");
- return -1;
- }
-
- return i;
-}
-
-/* Write [count] bytes out of [buffer] into the given SPI [address] */
-static int write_sector(unsigned long address, long count, uchar *buffer)
-{
- long write_cnt;
-
- while (count != 0) {
- write_cnt = write_flash(address, count, buffer);
- if (write_cnt == -1)
- return -1;
-
- /* Now that we've sent some bytes out to the flash, update
- * our counters a bit
- */
- count -= write_cnt;
- address += write_cnt;
- buffer += write_cnt;
- }
-
- /* return the appropriate error code */
- return 0;
-}
-
-/*
- * Function: spi_write
- */
-ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
-{
- unsigned long offset;
- int start_sector, end_sector;
- int start_byte, end_byte;
- uchar *temp = NULL;
- int num, ret = 0;
-
- SPI_INIT();
-
- if (spi_detect_part())
- goto out;
-
- offset = addr[0] << 16 | addr[1] << 8 | addr[2];
-
- /* Get the start block number */
- start_sector = address_to_sector(offset);
- if (start_sector == -1) {
- puts("Invalid sector! ");
- goto out;
- }
- end_sector = address_to_sector(offset + len - 1);
- if (end_sector == -1) {
- puts("Invalid sector! ");
- goto out;
- }
-
- /* Since flashes operate in sector units but the eeprom command
- * operates as a continuous stream of bytes, we need to emulate
- * the eeprom behavior. So here we read in the sector, overlay
- * any bytes we're actually modifying, erase the sector, and
- * then write back out the new sector.
- */
- temp = malloc(flash.sector_size);
- if (!temp) {
- puts("Malloc for sector failed! ");
- goto out;
- }
-
- for (num = start_sector; num <= end_sector; num++) {
- unsigned long address = num * flash.sector_size;
-
- /* XXX: should add an optimization when spanning sectors:
- * No point in reading in a sector if we're going to be
- * clobbering the whole thing. Need to also add a test
- * case to make sure the optimization is correct.
- */
- if (read_flash(address, flash.sector_size, temp)) {
- puts("Read sector failed! ");
- len = 0;
- break;
- }
-
- start_byte = max(address, offset);
- end_byte = address + flash.sector_size - 1;
- if (end_byte > (offset + len))
- end_byte = (offset + len - 1);
-
- memcpy(temp + start_byte - address,
- buffer + start_byte - offset,
- end_byte - start_byte + 1);
-
- if (erase_sector(address)) {
- puts("Erase sector failed! ");
- goto out;
- }
-
- if (write_sector(address, flash.sector_size, temp)) {
- puts("Write sector failed! ");
- goto out;
- }
-
- puts(".");
- }
-
- ret = len;
-
- out:
- free(temp);
-
- SPI_DEINIT();
-
- return ret;
-}
-
-/*
- * Function: spi_read
- */
-ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
-{
- unsigned long offset;
-
- SPI_INIT();
-
- if (spi_detect_part())
- len = 0;
- else {
- offset = addr[0] << 16 | addr[1] << 8 | addr[2];
- read_flash(offset, len, buffer);
- }
-
- SPI_DEINIT();
-
- return len;
-}
-
-/*
- * Spit out some useful information about the SPI eeprom
- */
-int eeprom_info(void)
-{
- int ret = 0;
-
- SPI_INIT();
-
- if (spi_detect_part())
- ret = 1;
- else
- printf("SPI Device: %s 0x%02X (%s) 0x%02X 0x%02X\n"
- "Parameters: num sectors = %lu, sector size = %lu, write size = %i\n"
- "Flash Size: %lu mbit (%lu mbyte)\n"
- "Status: 0x%02X\n",
- flash.flash->name, flash.manufacturer_id, flash.manufacturer->name,
- flash.device_id1, flash.device_id2, flash.num_sectors,
- flash.sector_size, flash.write_length,
- (flash.num_sectors * flash.sector_size) >> 17,
- (flash.num_sectors * flash.sector_size) >> 20,
- read_status_register());
-
- SPI_DEINIT();
-
- return ret;
-}
-
-#endif
diff --git a/board/bf548-ezkit/bf548-ezkit.c b/board/bf548-ezkit/bf548-ezkit.c
index 65fb81a..cb9ee86 100644
--- a/board/bf548-ezkit/bf548-ezkit.c
+++ b/board/bf548-ezkit/bf548-ezkit.c
@@ -7,10 +7,12 @@
*/
#include <common.h>
-#include <netdev.h>
#include <config.h>
#include <command.h>
+#include <netdev.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <asm/sdh.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -24,53 +26,13 @@
int board_early_init_f(void)
{
- /* Port H: PH8 - PH13 == A4 - A9
- * address lines of the parallel asynchronous memory interface
- */
-
- /************************************************
- * configure GPIO *
- * set port H function enable register *
- * configure PH8-PH13 as peripheral (not GPIO) *
- *************************************************/
- bfin_write_PORTH_FER(0x3F03);
-
- /************************************************
- * set port H MUX to configure PH8-PH13 *
- * 1st Function (MUX = 00) (bits 16-27 == 0) *
- * Set to address signals A4-A9 *
- *************************************************/
- bfin_write_PORTH_MUX(0);
-
- /************************************************
- * set port H direction register *
- * enable PH8-PH13 as outputs *
- *************************************************/
- bfin_write_PORTH_DIR_SET(0x3F00);
-
- /* Port I: PI0 - PH14 == A10 - A24
- * address lines of the parallel asynchronous memory interface
- */
-
- /************************************************
- * set port I function enable register *
- * configure PI0-PI14 as peripheral (not GPIO) *
- *************************************************/
- bfin_write_PORTI_FER(0x7fff);
-
- /**************************************************
- * set PORT I MUX to configure PI14-PI0 as *
- * 1st Function (MUX=00) - address signals A10-A24 *
- ***************************************************/
- bfin_write_PORTI_MUX(0);
-
- /****************************************
- * set PORT I direction register *
- * enable PI0 - PI14 as outputs *
- *****************************************/
- bfin_write_PORTI_DIR_SET(0x7fff);
-
- return 0;
+ /* Set async addr lines as peripheral */
+ const unsigned short pins[] = {
+ P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+ P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20,
+ P_A21, P_A22, P_A23, P_A24, 0
+ };
+ return peripheral_request_list(pins, "async");
}
#ifdef CONFIG_SMC911X
@@ -96,9 +58,7 @@
* be low for device mode and high for host mode. We set it high
* here because we are in host mode.
*/
- bfin_write_PORTE_FER(bfin_read_PORTE_FER() & ~PE7);
- bfin_write_PORTE_DIR_SET(PE7);
- bfin_write_PORTE_SET(PE7);
- SSYNC();
+ gpio_request(GPIO_PE7, "musb-vbus");
+ gpio_direction_output(GPIO_PE7, 1);
}
#endif
diff --git a/board/bf548-ezkit/video.c b/board/bf548-ezkit/video.c
index 10b08e2..af3d58b 100644
--- a/board/bf548-ezkit/video.c
+++ b/board/bf548-ezkit/video.c
@@ -11,6 +11,8 @@
#include <config.h>
#include <malloc.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/dma.h>
#include <i2c.h>
#include <linux/types.h>
@@ -173,22 +175,21 @@
void Init_Ports(void)
{
- *pPORTF_MUX = 0x00000000;
- *pPORTF_FER |= 0xFFFF; /* PPI0..15 */
-
- *pPORTG_MUX &= ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK);
- *pPORTG_FER |= PG0 | PG1 | PG2 | PG3 | PG4; /* CLK, FS1, FS2, PPI16..17 */
-
+ const unsigned short pins[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4,
+ P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9,
+ P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
+ P_PPI0_D15, P_PPI0_D16, P_PPI0_D17,
#if !defined(CONFIG_VIDEO_RGB666)
- *pPORTD_MUX &= ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK);
- *pPORTD_MUX |= (PORT_x_MUX_0_FUNC_4 | PORT_x_MUX_1_FUNC_4 | PORT_x_MUX_2_FUNC_4 | PORT_x_MUX_3_FUNC_4 | PORT_x_MUX_4_FUNC_4 | PORT_x_MUX_5_FUNC_4);
- *pPORTD_FER |= PD0 | PD1 | PD2 | PD3 | PD4 | PD5; /* PPI18..23 */
+ P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22,
+ P_PPI0_D23,
#endif
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0,
+ };
+ peripheral_request_list(pins, "lcd");
- *pPORTE_FER &= ~PE3; /* DISP */
- *pPORTE_DIR_SET = PE3;
- *pPORTE_SET = PE3;
-
+ gpio_request(GPIO_PE3, "lcd-disp");
+ gpio_direction_output(GPIO_PE3, 1);
}
void EnableDMA(void)
diff --git a/board/blackstamp/blackstamp.c b/board/blackstamp/blackstamp.c
index 6355c10..06d004a 100644
--- a/board/blackstamp/blackstamp.c
+++ b/board/blackstamp/blackstamp.c
@@ -13,7 +13,7 @@
#include <common.h>
#include <netdev.h>
-#include <asm/io.h>
+#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -27,14 +27,8 @@
#ifdef SHARED_RESOURCES
void swap_to(int device_id)
{
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
- SSYNC();
- if (device_id == ETHERNET)
- bfin_write_FIO_FLAG_S(PF0);
- else if (device_id == FLASH)
- bfin_write_FIO_FLAG_C(PF0);
- else
- printf("Unknown device to switch\n");
+ gpio_request(GPIO_PF0, "eth_flash_swap");
+ gpio_direction_output(GPIO_PF0, device_id == ETHERNET);
SSYNC();
}
#endif
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c
index da34b40..9df45c0 100644
--- a/board/calao/sbc35_a9g20/sbc35_a9g20.c
+++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c
@@ -177,13 +177,6 @@
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
}
#endif
diff --git a/board/cm-bf527/Makefile b/board/cm-bf527/Makefile
index c2cd244..bad018a 100644
--- a/board/cm-bf527/Makefile
+++ b/board/cm-bf527/Makefile
@@ -29,7 +29,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o gpio.o gpio_cfi_flash.o
+COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/cm-bf527/gpio.c b/board/cm-bf527/gpio.c
deleted file mode 100644
index 7e0babe..0000000
--- a/board/cm-bf527/gpio.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Control GPIO pins on the fly
- *
- * Copyright (c) 2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-
-#include <asm/blackfin.h>
-
-int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- if (argc != 3) {
- show_usage:
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- /* parse the behavior */
- ulong port_cmd = 0;
- switch (argv[1][0]) {
- case 'i': break;
- case 's': port_cmd = (PORTFIO_SET - PORTFIO); break;
- case 'c': port_cmd = (PORTFIO_CLEAR - PORTFIO); break;
- case 't': port_cmd = (PORTFIO_TOGGLE - PORTFIO); break;
- default: goto show_usage;
- }
-
- /* parse the pin with format: [p]<fgh><#> */
- const char *str_pin = argv[2];
-
- /* grab the [p]<fgh> portion */
- ulong port_base;
- if (*str_pin == 'p') ++str_pin;
- switch (*str_pin) {
- case 'f': port_base = PORTFIO; break;
- case 'g': port_base = PORTGIO; break;
- case 'h': port_base = PORTHIO; break;
- default: goto show_usage;
- }
-
- /* grab the <#> portion */
- ulong pin = simple_strtoul(str_pin+1, NULL, 10);
- ulong pin_mask = (1 << pin);
- if (pin > 15)
- goto show_usage;
-
- /* finally, let's do it: set direction and exec command */
- switch (*str_pin) {
- case 'f': bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~pin_mask); break;
- case 'g': bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~pin_mask); break;
- case 'h': bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~pin_mask); break;
- }
-
- ulong port_dir = port_base + (PORTFIO_DIR - PORTFIO);
- if (argv[1][0] == 'i')
- bfin_write16(port_dir, bfin_read16(port_dir) & ~pin_mask);
- else {
- bfin_write16(port_dir, bfin_read16(port_dir) | pin_mask);
- bfin_write16(port_base + port_cmd, pin_mask);
- }
-
- printf("gpio: pin %li on port %c has been %c\n", pin, *str_pin, argv[1][0]);
-
- return 0;
-}
-
-U_BOOT_CMD(gpio, 3, 0, do_gpio,
- "gpio - set/clear/toggle gpio output pins\n",
- "<s|c|t> <port><pin>\n"
- " - set/clear/toggle the specified pin\n");
diff --git a/board/cm-bf527/gpio_cfi_flash.c b/board/cm-bf527/gpio_cfi_flash.c
index 7167680..f8ccc07 100644
--- a/board/cm-bf527/gpio_cfi_flash.c
+++ b/board/cm-bf527/gpio_cfi_flash.c
@@ -8,12 +8,13 @@
#include <common.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include "gpio_cfi_flash.h"
-#define GPIO_PIN_1 PH9
+#define GPIO_PIN_1 GPIO_PH9
#define GPIO_MASK_1 (1 << 21)
-#define GPIO_PIN_2 PG11
+#define GPIO_PIN_2 GPIO_PG11
#define GPIO_MASK_2 (1 << 22)
#define GPIO_MASK (GPIO_MASK_1 | GPIO_MASK_2)
@@ -21,16 +22,10 @@
{
unsigned long addr = (unsigned long)vaddr;
- if (addr & GPIO_MASK_1)
- bfin_write_PORTHIO_SET(GPIO_PIN_1);
- else
- bfin_write_PORTHIO_CLEAR(GPIO_PIN_1);
+ gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1);
#ifdef GPIO_MASK_2
- if (addr & GPIO_MASK_2)
- bfin_write_PORTGIO_SET(GPIO_PIN_2);
- else
- bfin_write_PORTGIO_CLEAR(GPIO_PIN_2);
+ gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2);
#endif
SSYNC();
@@ -57,7 +52,9 @@
void gpio_cfi_flash_init(void)
{
- bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() | GPIO_PIN_1);
- bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | GPIO_PIN_2);
+ gpio_request(GPIO_PIN_1, "gpio_cfi_flash");
+#ifdef GPIO_MASK_2
+ gpio_request(GPIO_PIN_2, "gpio_cfi_flash");
+#endif
gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE);
}
diff --git a/board/cm-bf537e/Makefile b/board/cm-bf537e/Makefile
index 3812ba1..bad018a 100644
--- a/board/cm-bf537e/Makefile
+++ b/board/cm-bf537e/Makefile
@@ -29,7 +29,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o
+COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/cm-bf537e/flash.c b/board/cm-bf537e/flash.c
deleted file mode 100644
index a4c1ec0..0000000
--- a/board/cm-bf537e/flash.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * flash.c - helper commands for working with GPIO-assisted flash
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include "gpio_cfi_flash.h"
-
-int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong faddr = CONFIG_SYS_FLASH_BASE;
- ushort data;
- ulong dflg;
-
- if (argc > 1) {
- dflg = simple_strtoul(argv[1], NULL, 16);
- faddr |= (dflg << 21);
- gpio_cfi_flash_swizzle((void *)faddr);
- } else {
- data = bfin_read_PORTFIO();
- printf("Port F data %04x (PF4:%i)\n", data, !!(data & PF4));
- }
-
- return 0;
-}
-
-U_BOOT_CMD(pf, 3, 0, do_pf,
- "set/clear PF4 GPIO flash bank switch\n",
- "<pf4> - set PF4 GPIO pin state\n");
diff --git a/board/cm-bf537e/gpio_cfi_flash.c b/board/cm-bf537e/gpio_cfi_flash.c
index a9e69cf..79ee844 100644
--- a/board/cm-bf537e/gpio_cfi_flash.c
+++ b/board/cm-bf537e/gpio_cfi_flash.c
@@ -8,10 +8,11 @@
#include <common.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include "gpio_cfi_flash.h"
-#define GPIO_PIN_1 PF4
+#define GPIO_PIN_1 GPIO_PF4
#define GPIO_MASK_1 (1 << 21)
#define GPIO_MASK (GPIO_MASK_1)
@@ -19,16 +20,10 @@
{
unsigned long addr = (unsigned long)vaddr;
- if (addr & GPIO_MASK_1)
- bfin_write_PORTFIO_SET(GPIO_PIN_1);
- else
- bfin_write_PORTFIO_CLEAR(GPIO_PIN_1);
+ gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1);
#ifdef GPIO_MASK_2
- if (addr & GPIO_MASK_2)
- bfin_write_PORTGIO_SET(GPIO_PIN_2);
- else
- bfin_write_PORTGIO_CLEAR(GPIO_PIN_2);
+ gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2);
#endif
SSYNC();
@@ -55,6 +50,9 @@
void gpio_cfi_flash_init(void)
{
- bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() | GPIO_PIN_1);
+ gpio_request(GPIO_PIN_1, "gpio_cfi_flash");
+#ifdef GPIO_MASK_2
+ gpio_request(GPIO_PIN_2, "gpio_cfi_flash");
+#endif
gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE);
}
diff --git a/board/cm-bf537u/Makefile b/board/cm-bf537u/Makefile
index 3812ba1..bad018a 100644
--- a/board/cm-bf537u/Makefile
+++ b/board/cm-bf537u/Makefile
@@ -29,7 +29,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o
+COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/cm-bf537u/flash.c b/board/cm-bf537u/flash.c
deleted file mode 100644
index 52abe79..0000000
--- a/board/cm-bf537u/flash.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * flash.c - helper commands for working with GPIO-assisted flash
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include "gpio_cfi_flash.h"
-
-int do_ph(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong faddr = CONFIG_SYS_FLASH_BASE;
- ushort data;
- ulong dflg;
-
- if (argc > 1) {
- dflg = simple_strtoul(argv[1], NULL, 16);
- faddr |= (dflg << 21);
- gpio_cfi_flash_swizzle((void *)faddr);
- } else {
- data = bfin_read_PORTHIO();
- printf("Port H data %04x (PH0:%i)\n", data, !!(data & PH0));
- }
-
- return 0;
-}
-
-U_BOOT_CMD(ph, 3, 0, do_ph,
- "set/clear PH0 GPIO flash bank switch\n",
- "<ph0> - set PH0 GPIO pin state\n");
diff --git a/board/cm-bf537u/gpio_cfi_flash.c b/board/cm-bf537u/gpio_cfi_flash.c
index 68633ec..416c689 100644
--- a/board/cm-bf537u/gpio_cfi_flash.c
+++ b/board/cm-bf537u/gpio_cfi_flash.c
@@ -8,10 +8,11 @@
#include <common.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include "gpio_cfi_flash.h"
-#define GPIO_PIN_1 PH0
+#define GPIO_PIN_1 GPIO_PH0
#define GPIO_MASK_1 (1 << 21)
#define GPIO_MASK (GPIO_MASK_1)
@@ -19,16 +20,10 @@
{
unsigned long addr = (unsigned long)vaddr;
- if (addr & GPIO_MASK_1)
- bfin_write_PORTHIO_SET(GPIO_PIN_1);
- else
- bfin_write_PORTHIO_CLEAR(GPIO_PIN_1);
+ gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1);
#ifdef GPIO_MASK_2
- if (addr & GPIO_MASK_2)
- bfin_write_PORTGIO_SET(GPIO_PIN_2);
- else
- bfin_write_PORTGIO_CLEAR(GPIO_PIN_2);
+ gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2);
#endif
SSYNC();
@@ -55,6 +50,9 @@
void gpio_cfi_flash_init(void)
{
- bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() | GPIO_PIN_1);
+ gpio_request(GPIO_PIN_1, "gpio_cfi_flash");
+#ifdef GPIO_MASK_2
+ gpio_request(GPIO_PIN_2, "gpio_cfi_flash");
+#endif
gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE);
}
diff --git a/board/cm-bf548/cm-bf548.c b/board/cm-bf548/cm-bf548.c
index 3627586..90ce4c3 100644
--- a/board/cm-bf548/cm-bf548.c
+++ b/board/cm-bf548/cm-bf548.c
@@ -11,6 +11,7 @@
#include <command.h>
#include <netdev.h>
#include <asm/blackfin.h>
+#include <asm/portmux.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -23,53 +24,13 @@
int board_early_init_f(void)
{
- /* Port H: PH8 - PH13 == A4 - A9
- * address lines of the parallel asynchronous memory interface
- */
-
- /************************************************
- * configure GPIO *
- * set port H function enable register *
- * configure PH8-PH13 as peripheral (not GPIO) *
- *************************************************/
- bfin_write_PORTH_FER(0x3F03);
-
- /************************************************
- * set port H MUX to configure PH8-PH13 *
- * 1st Function (MUX = 00) (bits 16-27 == 0) *
- * Set to address signals A4-A9 *
- *************************************************/
- bfin_write_PORTH_MUX(0);
-
- /************************************************
- * set port H direction register *
- * enable PH8-PH13 as outputs *
- *************************************************/
- bfin_write_PORTH_DIR_SET(0x3F00);
-
- /* Port I: PI0 - PH14 == A10 - A24
- * address lines of the parallel asynchronous memory interface
- */
-
- /************************************************
- * set port I function enable register *
- * configure PI0-PI14 as peripheral (not GPIO) *
- *************************************************/
- bfin_write_PORTI_FER(0x7fff);
-
- /**************************************************
- * set PORT I MUX to configure PI14-PI0 as *
- * 1st Function (MUX=00) - address signals A10-A24 *
- ***************************************************/
- bfin_write_PORTI_MUX(0);
-
- /****************************************
- * set PORT I direction register *
- * enable PI0 - PI14 as outputs *
- *****************************************/
- bfin_write_PORTI_DIR_SET(0x7fff);
-
- return 0;
+ /* Set async addr lines as peripheral */
+ const unsigned short pins[] = {
+ P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+ P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20,
+ P_A21, P_A22, P_A23, P_A24, 0
+ };
+ return peripheral_request_list(pins, "async");
}
int board_eth_init(bd_t *bis)
diff --git a/board/cm-bf548/video.c b/board/cm-bf548/video.c
index 4097f09..d43f5a1 100644
--- a/board/cm-bf548/video.c
+++ b/board/cm-bf548/video.c
@@ -11,6 +11,8 @@
#include <config.h>
#include <malloc.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/dma.h>
#include <i2c.h>
#include <linux/types.h>
@@ -174,28 +176,21 @@
void Init_Ports(void)
{
- *pPORTF_MUX = 0x00000000;
- *pPORTF_FER |= 0xFFFF; /* PPI0..15 */
-
- *pPORTG_MUX &=
- ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK |
- PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK);
- *pPORTG_FER |= PG0 | PG1 | PG2 | PG3 | PG4; /* CLK, FS1, FS2, PPI16..17 */
-
+ const unsigned short pins[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4,
+ P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9,
+ P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
+ P_PPI0_D15, P_PPI0_D16, P_PPI0_D17,
#if !defined(CONFIG_VIDEO_RGB666)
- *pPORTD_MUX &=
- ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_2_MASK |
- PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK);
- *pPORTD_MUX |=
- (PORT_x_MUX_0_FUNC_4 | PORT_x_MUX_1_FUNC_4 | PORT_x_MUX_2_FUNC_4 |
- PORT_x_MUX_3_FUNC_4 | PORT_x_MUX_4_FUNC_4 | PORT_x_MUX_5_FUNC_4);
- *pPORTD_FER |= PD0 | PD1 | PD2 | PD3 | PD4 | PD5; /* PPI18..23 */
+ P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22,
+ P_PPI0_D23,
#endif
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0,
+ };
+ peripheral_request_list(pins, "lcd");
- *pPORTE_FER &= ~PE3; /* DISP */
- *pPORTE_DIR_SET = PE3;
- *pPORTE_SET = PE3;
-
+ gpio_request(GPIO_PE3, "lcd-disp");
+ gpio_direction_output(GPIO_PE3, 1);
}
void EnableDMA(void)
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index af8a4a2..61b6c33 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -200,13 +200,6 @@
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
}
#endif
diff --git a/board/altera/ep1c20/Makefile b/board/freescale/mpc8308rdb/Makefile
similarity index 88%
rename from board/altera/ep1c20/Makefile
rename to board/freescale/mpc8308rdb/Makefile
index acad2aa..e9bfa2b 100644
--- a/board/altera/ep1c20/Makefile
+++ b/board/freescale/mpc8308rdb/Makefile
@@ -1,6 +1,8 @@
#
-# (C) Copyright 2001-2006
+# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2010
+# Ilya Yanok, Emcraft Systems, yanok@emcraft.com
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -22,15 +24,10 @@
#
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
LIB = $(obj)lib$(BOARD).a
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-
-COBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o sdram.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mpc8308rdb/config.mk b/board/freescale/mpc8308rdb/config.mk
new file mode 100644
index 0000000..f768264
--- /dev/null
+++ b/board/freescale/mpc8308rdb/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0xFE000000
diff --git a/board/freescale/mpc8308rdb/mpc8308rdb.c b/board/freescale/mpc8308rdb/mpc8308rdb.c
new file mode 100644
index 0000000..a864189
--- /dev/null
+++ b/board/freescale/mpc8308rdb/mpc8308rdb.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <pci.h>
+#include <mpc83xx.h>
+#include <vsc7385.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_mpc83xx_serdes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF)
+ gd->flags |= GD_FLG_SILENT;
+
+ return 0;
+}
+
+static u8 read_board_info(void)
+{
+ u8 val8;
+ i2c_set_bus_num(0);
+
+ if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
+ return val8;
+ else
+ return 0;
+}
+
+int checkboard(void)
+{
+ static const char * const rev_str[] = {
+ "1.0",
+ "<reserved>",
+ "<reserved>",
+ "<reserved>",
+ "<unknown>",
+ };
+ u8 info;
+ int i;
+
+ info = read_board_info();
+ i = (!info) ? 4 : info & 0x03;
+
+ printf("Board: Freescale MPC8308RDB Rev %s\n", rev_str[i]);
+
+ return 0;
+}
+
+static struct pci_region pcie_regions_0[] = {
+ {
+ .bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
+ .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
+ .size = CONFIG_SYS_PCIE1_MEM_SIZE,
+ .flags = PCI_REGION_MEM,
+ },
+ {
+ .bus_start = CONFIG_SYS_PCIE1_IO_BASE,
+ .phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
+ .size = CONFIG_SYS_PCIE1_IO_SIZE,
+ .flags = PCI_REGION_IO,
+ },
+};
+
+void pci_init_board(void)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ sysconf83xx_t *sysconf = &immr->sysconf;
+ clk83xx_t *clk = (clk83xx_t *)&immr->clk;
+ law83xx_t *pcie_law = sysconf->pcielaw;
+ struct pci_region *pcie_reg[] = { pcie_regions_0 };
+
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+
+ clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM ,
+ SCCR_PCIEXP1CM_1);
+
+ /* Deassert the resets in the control register */
+ out_be32(&sysconf->pecr1, 0xE0008000);
+ udelay(2000);
+
+ /* Configure PCI Express Local Access Windows */
+ out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
+ out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+ mpc83xx_pcie_init(1, pcie_reg, 0);
+}
+/*
+ * Miscellaneous late-boot configurations
+ *
+ * If a VSC7385 microcode image is present, then upload it.
+*/
+int misc_init_r(void)
+{
+#ifdef CONFIG_VSC7385_IMAGE
+ if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
+ CONFIG_VSC7385_IMAGE_SIZE)) {
+ puts("Failure uploading VSC7385 microcode.\n");
+ return 1;
+ }
+#endif
+
+ return 0;
+}
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+ fdt_fixup_dr_usb(blob, bd);
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rv, num_if = 0;
+
+ /* Initialize TSECs first */
+ if ((rv = cpu_eth_init(bis)) >= 0)
+ num_if += rv;
+ else
+ printf("ERROR: failed to initialize TSECs.\n");
+
+ if ((rv = pci_eth_init(bis)) >= 0)
+ num_if += rv;
+ else
+ printf("ERROR: failed to initialize PCI Ethernet.\n");
+
+ return num_if;
+}
diff --git a/board/freescale/mpc8308rdb/sdram.c b/board/freescale/mpc8308rdb/sdram.c
new file mode 100644
index 0000000..939c1b8
--- /dev/null
+++ b/board/freescale/mpc8308rdb/sdram.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * Authors: Nick.Spence@freescale.com
+ * Wilson.Lo@freescale.com
+ * scottwood@freescale.com
+ *
+ * This files is mostly identical to the original from
+ * board\freescale\mpc8315erdb\sdram.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void resume_from_sleep(void)
+{
+ u32 magic = *(u32 *)0;
+
+ typedef void (*func_t)(void);
+ func_t resume = *(func_t *)4;
+
+ if (magic == 0xf5153ae5)
+ resume();
+
+ gd->flags &= ~GD_FLG_SILENT;
+ puts("\nResume from sleep failed: bad magic word\n");
+}
+
+/* Fixed sdram init -- doesn't use serial presence detect.
+ *
+ * This is useful for faster booting in configs where the RAM is unlikely
+ * to be changed, or for things like NAND booting where space is tight.
+ */
+static long fixed_sdram(void)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+
+ out_be32(&im->sysconf.ddrlaw[0].bar,
+ CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000);
+ out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
+ out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
+
+ /*
+ * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
+ * or the DDR2 controller may fail to initialize correctly.
+ */
+ udelay(50000);
+
+ out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
+ out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
+
+ /* Currently we use only one CS, so disable the other bank. */
+ out_be32(&im->ddr.cs_config[1], 0);
+
+ out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
+ out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
+ out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
+ out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+ out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
+
+ if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF) {
+ out_be32(&im->ddr.sdram_cfg,
+ CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI);
+ } else {
+ out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
+ }
+
+ out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2);
+ out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
+ out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2);
+
+ out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
+ sync();
+
+ /* enable DDR controller */
+ setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
+ sync();
+
+ return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize);
+}
+
+phys_size_t initdram(int board_type)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ u32 msize;
+
+ if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
+ return -1;
+
+ /* DDR SDRAM */
+ msize = fixed_sdram();
+
+ if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF)
+ resume_from_sleep();
+
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return msize;
+}
diff --git a/board/ibf-dsp561/ibf-dsp561.c b/board/ibf-dsp561/ibf-dsp561.c
index b5bebd4..d2ac7a5 100644
--- a/board/ibf-dsp561/ibf-dsp561.c
+++ b/board/ibf-dsp561/ibf-dsp561.c
@@ -7,6 +7,7 @@
*/
#include <common.h>
+#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -16,3 +17,10 @@
printf(" Support: http://www.i-syst.com/\n");
return 0;
}
+
+#ifdef CONFIG_DRIVER_AX88180
+int board_eth_init(bd_t *bis)
+{
+ return ax88180_initialize(bis);
+}
+#endif
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index c7835de..e41c84c 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -387,13 +387,6 @@
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
-#ifdef CONFIG_MACB
- /*
- * Initialize ethernet HW addr prior to starting Linux,
- * needed for nfsroot
- */
- eth_init(gd->bd);
-#endif
}
#endif
diff --git a/board/tcm-bf537/Makefile b/board/tcm-bf537/Makefile
index 3812ba1..bad018a 100644
--- a/board/tcm-bf537/Makefile
+++ b/board/tcm-bf537/Makefile
@@ -29,7 +29,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o
+COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/tcm-bf537/flash.c b/board/tcm-bf537/flash.c
deleted file mode 100644
index 14055c6..0000000
--- a/board/tcm-bf537/flash.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * flash.c - helper commands for working with GPIO-assisted flash
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include "gpio_cfi_flash.h"
-
-int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong faddr = CONFIG_SYS_FLASH_BASE;
- ushort data;
- ulong dflg;
-
- if (argc == 3) {
- dflg = simple_strtoul(argv[1], NULL, 16);
- faddr |= (dflg << 21);
- dflg = simple_strtoul(argv[2], NULL, 16);
- faddr |= (dflg << 22);
- gpio_cfi_flash_swizzle((void *)faddr);
- } else {
- data = bfin_read_PORTFIO();
- printf("Port F data %04x (PF4:%i PF5:%i)\n", data,
- !!(data & PF4), !!(data & PF5));
- }
-
- return 0;
-}
-
-U_BOOT_CMD(pf, 3, 0, do_pf,
- "set/clear PF4/PF5 GPIO flash bank switch\n",
- "<pf4> <pf5> - set PF4/PF5 GPIO pin state\n");
diff --git a/board/tcm-bf537/gpio_cfi_flash.c b/board/tcm-bf537/gpio_cfi_flash.c
index ac8587c..08ea7af 100644
--- a/board/tcm-bf537/gpio_cfi_flash.c
+++ b/board/tcm-bf537/gpio_cfi_flash.c
@@ -8,12 +8,13 @@
#include <common.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include "gpio_cfi_flash.h"
-#define GPIO_PIN_1 PF4
+#define GPIO_PIN_1 GPIO_PF4
#define GPIO_MASK_1 (1 << 21)
-#define GPIO_PIN_2 PF5
+#define GPIO_PIN_2 GPIO_PF5
#define GPIO_MASK_2 (1 << 22)
#define GPIO_MASK (GPIO_MASK_1 | GPIO_MASK_2)
@@ -21,16 +22,10 @@
{
unsigned long addr = (unsigned long)vaddr;
- if (addr & GPIO_MASK_1)
- bfin_write_PORTFIO_SET(GPIO_PIN_1);
- else
- bfin_write_PORTFIO_CLEAR(GPIO_PIN_1);
+ gpio_set_value(GPIO_PIN_1, addr & GPIO_MASK_1);
#ifdef GPIO_MASK_2
- if (addr & GPIO_MASK_2)
- bfin_write_PORTFIO_SET(GPIO_PIN_2);
- else
- bfin_write_PORTFIO_CLEAR(GPIO_PIN_2);
+ gpio_set_value(GPIO_PIN_2, addr & GPIO_MASK_2);
#endif
SSYNC();
@@ -57,6 +52,9 @@
void gpio_cfi_flash_init(void)
{
- bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() | GPIO_PIN_1 | GPIO_PIN_2);
+ gpio_request(GPIO_PIN_1, "gpio_cfi_flash");
+#ifdef GPIO_MASK_2
+ gpio_request(GPIO_PIN_2, "gpio_cfi_flash");
+#endif
gpio_cfi_flash_swizzle((void *)CONFIG_SYS_FLASH_BASE);
}
diff --git a/board/altera/ep1c20/Makefile b/board/ve8313/Makefile
similarity index 88%
copy from board/altera/ep1c20/Makefile
copy to board/ve8313/Makefile
index acad2aa..c95f90e 100644
--- a/board/altera/ep1c20/Makefile
+++ b/board/ve8313/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2006
+# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,15 +22,10 @@
#
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
LIB = $(obj)lib$(BOARD).a
-COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-
-COBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/ve8313/config.mk b/board/ve8313/config.mk
new file mode 100644
index 0000000..02dd33e
--- /dev/null
+++ b/board/ve8313/config.mk
@@ -0,0 +1,7 @@
+ifndef NAND_SPL
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+endif
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xfe000000
+endif
diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c
new file mode 100644
index 0000000..8ba1b19
--- /dev/null
+++ b/board/ve8313/ve8313.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006-2007
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <pci.h>
+#include <mpc83xx.h>
+#include <ns16550.h>
+#include <nand.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void disable_addr_trans (void);
+extern void enable_addr_trans (void);
+
+int checkboard(void)
+{
+ puts("Board: ve8313\n");
+ return 0;
+}
+
+static long fixed_sdram(void)
+{
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+
+#ifndef CONFIG_SYS_RAMBOOT
+ volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+ u32 msize_log2 = __ilog2(msize);
+
+ out_be32(&im->sysconf.ddrlaw[0].bar,
+ (CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000));
+ out_be32(&im->sysconf.ddrlaw[0].ar, (LBLAWAR_EN | (msize_log2 - 1)));
+ out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
+
+ /*
+ * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
+ * or the DDR2 controller may fail to initialize correctly.
+ */
+ __udelay(50000);
+
+ out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
+ out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CONFIG);
+
+ /* Currently we use only one CS, so disable the other bank. */
+ out_be32(&im->ddr.cs_config[1], 0);
+
+ out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
+ out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
+ out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
+ out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+ out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
+
+ out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG);
+
+ out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2);
+ out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
+ out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2);
+
+ out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
+ sync();
+
+ /* enable DDR controller */
+ setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
+
+ /* now check the real size */
+ disable_addr_trans ();
+ msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize);
+ enable_addr_trans ();
+#endif
+
+ return msize;
+}
+
+phys_size_t initdram(int board_type)
+{
+ volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+ volatile fsl_lbus_t *lbc = &im->lbus;
+ u32 msize;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+ return -1;
+
+ /* DDR SDRAM - Main SODIMM */
+ msize = fixed_sdram();
+
+ /* Local Bus setup lbcr and mrtpr */
+ out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
+ out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
+ sync();
+
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return msize;
+}
+
+#define VE8313_WDT_EN 0x00020000
+#define VE8313_WDT_TRIG 0x00040000
+
+int board_early_init_f (void)
+{
+ volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+ volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)im->gpio;
+
+#if defined(CONFIG_HW_WATCHDOG)
+ /* enable WDT */
+ clrbits_be32(&gpio->dat, VE8313_WDT_EN | VE8313_WDT_TRIG);
+#else
+ /* disable WDT */
+ setbits_be32(&gpio->dat, VE8313_WDT_EN | VE8313_WDT_TRIG);
+#endif
+ /* set WDT pins as output */
+ setbits_be32(&gpio->dir, VE8313_WDT_EN | VE8313_WDT_TRIG);
+
+ return 0;
+}
+
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+ volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+ volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)im->gpio;
+ unsigned long reg;
+
+ reg = in_be32(&gpio->dat);
+ if (reg & VE8313_WDT_TRIG)
+ clrbits_be32(&gpio->dat, VE8313_WDT_TRIG);
+ else
+ setbits_be32(&gpio->dat, VE8313_WDT_TRIG);
+}
+#endif
+
+
+#if defined(CONFIG_PCI)
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+ phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+ size: CONFIG_SYS_PCI1_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+ phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+ size: CONFIG_SYS_PCI1_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CONFIG_SYS_PCI1_IO_BASE,
+ phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+ size: CONFIG_SYS_PCI1_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+ volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+ volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+ struct pci_region *reg[] = { pci_regions };
+ int warmboot;
+
+ /* Enable all 3 PCI_CLK_OUTPUTs. */
+ setbits_be32(&clk->occr, 0xe0000000);
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ out_be32(&pci_law[0].bar, CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR);
+ out_be32(&pci_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+ out_be32(&pci_law[1].bar, CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR);
+ out_be32(&pci_law[1].ar, LBLAWAR_EN | LBLAWAR_1MB);
+
+ warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
+
+ mpc83xx_pci_init(1, reg, warmboot);
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index 59cc128..a9be439 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -75,9 +75,6 @@
EP2500 m68k mcf52x2 ep2500 Mercury
purple mips mips
tb0229 mips mips
-EP1C20 nios2 nios2 ep1c20 altera
-EP1S10 nios2 nios2 ep1s10 altera
-EP1S40 nios2 nios2 ep1s40 altera
PCI5441 nios2 nios2 pci5441 psyent
PK1C20 nios2 nios2 pk1c20 psyent
P3G4 powerpc 74xx_7xx evb64260
@@ -132,6 +129,7 @@
mgcoge powerpc mpc8260 - keymile
SCM powerpc mpc8260 - siemens
TQM8272 powerpc mpc8260 tqm8272 tqc
+ve8313 powerpc mpc83xx ve8313
kmeter1 powerpc mpc83xx kmeter1 keymile
MVBLM7 powerpc mpc83xx mvblm7 matrix_vision
TQM834x powerpc mpc83xx tqm834x tqc
@@ -284,6 +282,7 @@
hammerhead avr32 at32ap - miromico at32ap700x
bf518f-ezbrd blackfin blackfin
bf526-ezbrd blackfin blackfin
+bf527-ad7160-eval blackfin blackfin
bf527-ezkit blackfin blackfin
bf533-ezkit blackfin blackfin
bf533-stamp blackfin blackfin
@@ -333,6 +332,7 @@
RPXsuper powerpc mpc8260 rpxsuper
rsdproto powerpc mpc8260
MPC8266ADS powerpc mpc8260 mpc8266ads freescale
+MPC8308RDB powerpc mpc83xx mpc8308rdb freescale
MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
MPC8349EMDS powerpc mpc83xx mpc8349emds freescale
MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index ea80555..84b6272 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -4,6 +4,10 @@
* (c) 1999 Machine Vision Holdings, Inc.
* (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
*
+ * Ported 'dynenv' to 'nand env.oob' command
+ * (C) 2010 Nanometrics, Inc.
+ * 'dynenv' -- Dynamic environment offset in NAND OOB
+ * (C) Copyright 2006-2007 OpenMoko, Inc.
* Added 16-bit nand support
* (C) 2004 Texas Instruments
*/
@@ -193,6 +197,90 @@
}
#endif
+#ifdef CONFIG_ENV_OFFSET_OOB
+unsigned long nand_env_oob_offset;
+
+int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand,
+ int argc, char * const argv[])
+{
+ int ret;
+ uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)];
+
+ char *cmd = argv[1];
+
+ if (!strcmp(cmd, "get")) {
+ ret = get_nand_env_oob(nand, &nand_env_oob_offset);
+ if (ret)
+ return 1;
+
+ printf("0x%08lx\n", nand_env_oob_offset);
+ } else if (!strcmp(cmd, "set")) {
+ ulong addr;
+ size_t dummy_size;
+ struct mtd_oob_ops ops;
+
+ if (argc < 3)
+ goto usage;
+
+ if (arg_off_size(argc - 2, argv + 2, nand, &addr,
+ &dummy_size) < 0) {
+ printf("Offset or partition name expected\n");
+ return 1;
+ }
+
+ if (nand->oobavail < ENV_OFFSET_SIZE) {
+ printf("Insufficient available OOB bytes:\n"
+ "%d OOB bytes available but %d required for "
+ "env.oob support\n",
+ nand->oobavail, ENV_OFFSET_SIZE);
+ return 1;
+ }
+
+ if ((addr & (nand->erasesize - 1)) != 0) {
+ printf("Environment offset must be block-aligned\n");
+ return 1;
+ }
+
+ ops.datbuf = NULL;
+ ops.mode = MTD_OOB_AUTO;
+ ops.ooboffs = 0;
+ ops.ooblen = ENV_OFFSET_SIZE;
+ ops.oobbuf = (void *) oob_buf;
+
+ oob_buf[0] = ENV_OOB_MARKER;
+ oob_buf[1] = addr / nand->erasesize;
+
+ ret = nand->write_oob(nand, ENV_OFFSET_SIZE, &ops);
+ if (ret) {
+ printf("Error writing OOB block 0\n");
+ return ret;
+ }
+
+ ret = get_nand_env_oob(nand, &nand_env_oob_offset);
+ if (ret) {
+ printf("Error reading env offset in OOB\n");
+ return ret;
+ }
+
+ if (addr != nand_env_oob_offset) {
+ printf("Verification of env offset in OOB failed: "
+ "0x%08lx expected but got 0x%08lx\n",
+ addr, nand_env_oob_offset);
+ return 1;
+ }
+ } else {
+ goto usage;
+ }
+
+ return ret;
+
+usage:
+ cmd_usage(cmdtp);
+ return 1;
+}
+
+#endif
+
static void nand_print_info(int idx)
{
nand_info_t *nand = &nand_info[idx];
@@ -272,9 +360,21 @@
strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
strcmp(cmd, "biterr") != 0 &&
- strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 )
+ strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0
+#ifdef CONFIG_ENV_OFFSET_OOB
+ && strcmp(cmd, "env.oob") != 0
+#endif
+ )
goto usage;
+#ifdef CONFIG_ENV_OFFSET_OOB
+ /* this command operates only on the first nand device */
+ if (strcmp(cmd, "env.oob") == 0) {
+ return do_nand_env_oob(cmdtp, &nand_info[0],
+ argc - 1, argv + 1);
+ }
+#endif
+
/* the following commands operate on the current device */
if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!nand_info[nand_curr_device].name) {
@@ -502,6 +602,13 @@
" bring nand to lock state or display locked pages\n"
"nand unlock [offset] [size] - unlock section"
#endif
+#ifdef CONFIG_ENV_OFFSET_OOB
+ "\n"
+ "nand env.oob - environment offset in OOB of block 0 of"
+ " first device.\n"
+ "nand env.oob set off|partition - set enviromnent offset\n"
+ "nand env.oob get - get environment offset"
+#endif
);
static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
diff --git a/common/env_nand.c b/common/env_nand.c
index 50bc111..a5e1038 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -38,6 +38,7 @@
#include <linux/stddef.h>
#include <malloc.h>
#include <nand.h>
+#include <asm/errno.h>
#if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND)
#define CMD_SAVEENV
@@ -284,6 +285,38 @@
return 0;
}
+#ifdef CONFIG_ENV_OFFSET_OOB
+int get_nand_env_oob(nand_info_t *nand, unsigned long *result)
+{
+ struct mtd_oob_ops ops;
+ uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)];
+ int ret;
+
+ ops.datbuf = NULL;
+ ops.mode = MTD_OOB_AUTO;
+ ops.ooboffs = 0;
+ ops.ooblen = ENV_OFFSET_SIZE;
+ ops.oobbuf = (void *) oob_buf;
+
+ ret = nand->read_oob(nand, ENV_OFFSET_SIZE, &ops);
+ if (ret) {
+ printf("error reading OOB block 0\n");
+ return ret;
+ }
+
+ if (oob_buf[0] == ENV_OOB_MARKER) {
+ *result = oob_buf[1] * nand->erasesize;
+ } else if (oob_buf[0] == ENV_OOB_MARKER_OLD) {
+ *result = oob_buf[1];
+ } else {
+ printf("No dynamic environment marker in OOB block 0\n");
+ return -ENOENT;
+ }
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_ENV_OFFSET_REDUND
void env_relocate_spec (void)
{
@@ -353,6 +386,17 @@
#if !defined(ENV_IS_EMBEDDED)
int ret;
+#if defined(CONFIG_ENV_OFFSET_OOB)
+ ret = get_nand_env_oob(&nand_info[0], &nand_env_oob_offset);
+ /* If unable to read environment offset from NAND OOB then fall through
+ * to the normal environment reading code below
+ */
+ if (!ret)
+ printf("Found Environment offset in OOB..\n");
+ else
+ return use_default();
+#endif
+
ret = readenv(CONFIG_ENV_OFFSET, (u_char *) env_ptr);
if (ret)
return use_default();
diff --git a/doc/README.designware_eth b/doc/README.designware_eth
new file mode 100644
index 0000000..25ec6bd
--- /dev/null
+++ b/doc/README.designware_eth
@@ -0,0 +1,25 @@
+This driver supports Designware Ethernet Controller provided by Synopsis.
+
+The driver is enabled by CONFIG_DESIGNWARE_ETH.
+
+The driver has been developed and tested on SPEAr platforms. By default, the
+MDIO interface works at 100/Full. #defining the below options in board
+configuration file changes this behavior.
+
+Call an subroutine from respective board/.../board.c
+designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
+
+The various options suported by the driver are
+1. CONFIG_DW_ALTDESCRIPTOR
+ Define this to use the Alternate/Enhanced Descriptor configurations.
+1. CONFIG_DW_AUTONEG
+ Define this to autonegotiate with the host before proceeding with mac
+ level configuration. This obviates the definitions of CONFIG_DW_SPEED10M
+ and CONFIG_DW_DUPLEXHALF.
+2. CONFIG_DW_SPEED10M
+ Define this to change the default behavior from 100Mbps to 10Mbps.
+3. CONFIG_DW_DUPLEXHALF
+ Define this to change the default behavior from Full Duplex to Half.
+4. CONFIG_DW_SEARCH_PHY
+ Define this to search the phy address. This would overwrite the value
+ passed as 3rd arg from designware_initialize routine.
diff --git a/drivers/block/pata_bfin.c b/drivers/block/pata_bfin.c
index f16dabe..847c032 100644
--- a/drivers/block/pata_bfin.c
+++ b/drivers/block/pata_bfin.c
@@ -14,6 +14,7 @@
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/errno.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/pata.h>
#include <ata.h>
#include <libata.h>
@@ -769,19 +770,17 @@
*/
static int bfin_config_atapi_gpio(struct ata_port *ap)
{
- bfin_write_PORTH_FER(bfin_read_PORTH_FER() | 0x4);
- bfin_write_PORTH_MUX(bfin_read_PORTH_MUX() & ~0x30);
- bfin_write_PORTH_DIR_SET(0x4);
+ const unsigned short pins[] = {
+ P_ATAPI_RESET, P_ATAPI_DIOR, P_ATAPI_DIOW, P_ATAPI_CS0,
+ P_ATAPI_CS1, P_ATAPI_DMACK, P_ATAPI_DMARQ, P_ATAPI_INTRQ,
+ P_ATAPI_IORDY, P_ATAPI_D0A, P_ATAPI_D1A, P_ATAPI_D2A,
+ P_ATAPI_D3A, P_ATAPI_D4A, P_ATAPI_D5A, P_ATAPI_D6A,
+ P_ATAPI_D7A, P_ATAPI_D8A, P_ATAPI_D9A, P_ATAPI_D10A,
+ P_ATAPI_D11A, P_ATAPI_D12A, P_ATAPI_D13A, P_ATAPI_D14A,
+ P_ATAPI_D15A, P_ATAPI_A0A, P_ATAPI_A1A, P_ATAPI_A2A, 0,
+ };
- bfin_write_PORTJ_FER(0x7f8);
- bfin_write_PORTJ_MUX(bfin_read_PORTI_MUX() & ~0x3fffc0);
- bfin_write_PORTJ_DIR_SET(0x5f8);
- bfin_write_PORTJ_DIR_CLEAR(0x200);
- bfin_write_PORTJ_INEN(0x200);
-
- bfin_write_PINT2_ASSIGN(0x0707);
- bfin_write_PINT2_MASK_SET(0x200);
- SSYNC();
+ peripheral_request_list(pins, "pata_bfin");
return 0;
}
diff --git a/drivers/misc/gpio_led.c b/drivers/misc/gpio_led.c
index acd6a90..3fedddc 100644
--- a/drivers/misc/gpio_led.c
+++ b/drivers/misc/gpio_led.c
@@ -2,26 +2,22 @@
* Status LED driver based on GPIO access conventions of Linux
*
* Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <status_led.h>
#include <asm/gpio.h>
-/* assume led is active low */
-
void __led_init(led_id_t mask, int state)
{
- gpio_direction_output(mask, (state == STATUS_LED_ON) ? 0 : 1);
+ gpio_request(mask, "gpio_led");
+ gpio_direction_output(mask, state == STATUS_LED_ON);
}
void __led_set(led_id_t mask, int state)
{
- gpio_set_value(mask, (state == STATUS_LED_ON) ? 0 : 1);
+ gpio_set_value(mask, state == STATUS_LED_ON);
}
void __led_toggle(led_id_t mask)
diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c
index f9d560a..4a77779 100644
--- a/drivers/mmc/bfin_sdh.c
+++ b/drivers/mmc/bfin_sdh.c
@@ -15,6 +15,7 @@
#include <asm/errno.h>
#include <asm/byteorder.h>
#include <asm/blackfin.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/sdh.h>
#include <asm/mach-common/bits/dma.h>
@@ -41,11 +42,15 @@
# define bfin_write_DMA_X_COUNT bfin_write_DMA4_X_COUNT
# define bfin_write_DMA_X_MODIFY bfin_write_DMA4_X_MODIFY
# define bfin_write_DMA_CONFIG bfin_write_DMA4_CONFIG
+# define PORTMUX_PINS \
+ { P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0 }
#elif defined(__ADSPBF54x__)
# define bfin_write_DMA_START_ADDR bfin_write_DMA22_START_ADDR
# define bfin_write_DMA_X_COUNT bfin_write_DMA22_X_COUNT
# define bfin_write_DMA_X_MODIFY bfin_write_DMA22_X_MODIFY
# define bfin_write_DMA_CONFIG bfin_write_DMA22_CONFIG
+# define PORTMUX_PINS \
+ { P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0 }
#else
# error no support for this proc yet
#endif
@@ -208,18 +213,13 @@
static int bfin_sdh_init(struct mmc *mmc)
{
-
+ const unsigned short pins[] = PORTMUX_PINS;
u16 pwr_ctl = 0;
-/* Initialize sdh controller */
+
+ /* Initialize sdh controller */
+ peripheral_request_list(pins, "bfin_sdh");
#if defined(__ADSPBF54x__)
bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
- bfin_write_PORTC_FER(bfin_read_PORTC_FER() | 0x3F00);
- bfin_write_PORTC_MUX(bfin_read_PORTC_MUX() & ~0xFFF0000);
-#elif defined(__ADSPBF51x__)
- bfin_write_PORTG_FER(bfin_read_PORTG_FER() | 0x01F8);
- bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~0x3FC) | 0x154);
-#else
-# error no portmux for this proc yet
#endif
bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
/* Disable card detect pin */
diff --git a/drivers/mtd/nand/bfin_nand.c b/drivers/mtd/nand/bfin_nand.c
index 6d3d450..3ee060f 100644
--- a/drivers/mtd/nand/bfin_nand.c
+++ b/drivers/mtd/nand/bfin_nand.c
@@ -26,6 +26,7 @@
#include <nand.h>
#include <asm/blackfin.h>
+#include <asm/portmux.h>
/* Bit masks for NFC_CTL */
@@ -337,6 +338,12 @@
*/
int board_nand_init(struct nand_chip *chip)
{
+ const unsigned short pins[] = {
+ P_NAND_CE, P_NAND_RB, P_NAND_D0, P_NAND_D1, P_NAND_D2,
+ P_NAND_D3, P_NAND_D4, P_NAND_D5, P_NAND_D6, P_NAND_D7,
+ P_NAND_WE, P_NAND_RE, P_NAND_CLE, P_NAND_ALE, 0,
+ };
+
pr_stamp();
/* set width/ecc/timings/etc... */
@@ -347,14 +354,7 @@
bfin_write_NFC_IRQSTAT(0xffff);
/* enable GPIO function enable register */
-#ifdef __ADSPBF54x__
- bfin_write_PORTJ_FER(bfin_read_PORTJ_FER() | 6);
-#elif defined(__ADSPBF52x__)
- bfin_write_PORTH_FER(bfin_read_PORTH_FER() | 0xFCFF);
- bfin_write_PORTH_MUX(0);
-#else
-# error no support for this variant
-#endif
+ peripheral_request_list(pins, "bfin_nand");
chip->cmd_ctrl = bfin_nfc_cmd_ctrl;
chip->read_buf = bfin_nfc_read_buf;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 7171bdd..ed1c9c9 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2652,8 +2652,12 @@
}
}
- if (!type)
+ if (!type) {
+ printk(KERN_INFO "%s: unknown NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x\n", __func__,
+ *maf_id, dev_id);
return ERR_PTR(-ENODEV);
+ }
if (!mtd->name)
mtd->name = type->name;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 077c305..25b22ec 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -83,6 +83,7 @@
/* 1 Gigabit */
{"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS},
{"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0xD1, 0, 128, 0, LP_OPTIONS},
{"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16},
{"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16},
diff --git a/drivers/mtd/nand/nand_plat.c b/drivers/mtd/nand/nand_plat.c
index b35492b..37a0206 100644
--- a/drivers/mtd/nand/nand_plat.c
+++ b/drivers/mtd/nand/nand_plat.c
@@ -16,6 +16,10 @@
#include <common.h>
#include <asm/io.h>
+#ifdef NAND_PLAT_GPIO_DEV_READY
+# include <asm/gpio.h>
+# define NAND_PLAT_DEV_READY(chip) gpio_get_value(NAND_PLAT_GPIO_DEV_READY)
+#endif
#include <nand.h>
@@ -43,7 +47,14 @@
int board_nand_init(struct nand_chip *nand)
{
+#ifdef NAND_PLAT_GPIO_DEV_READY
+ gpio_request(NAND_PLAT_GPIO_DEV_READY, "nand-plat");
+ gpio_direction_input(NAND_PLAT_GPIO_DEV_READY);
+#endif
+
+#ifdef NAND_PLAT_INIT
NAND_PLAT_INIT();
+#endif
nand->cmd_ctrl = plat_cmd_ctrl;
nand->dev_ready = plat_dev_ready;
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index 2fac641..144b851 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -1095,6 +1095,11 @@
miiphy_write (dev->name, reg, 0x18, 0x4101);
miiphy_write (dev->name, reg, 0x09, 0x0e00);
miiphy_write (dev->name, reg, 0x04, 0x01e1);
+#if defined(CONFIG_M88E1111_DISABLE_FIBER)
+ miiphy_read(dev->name, reg, 0x1b, ®_short);
+ reg_short |= 0x8000;
+ miiphy_write(dev->name, reg, 0x1b, reg_short);
+#endif
#endif
#if defined(CONFIG_M88E1112_PHY)
if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) {
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b75c02f..218eeff 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -34,6 +34,7 @@
COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
COBJS-$(CONFIG_CS8900) += cs8900.o
COBJS-$(CONFIG_TULIP) += dc2114x.o
+COBJS-$(CONFIG_DESIGNWARE_ETH) += designware.o
COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o
COBJS-$(CONFIG_DNET) += dnet.o
COBJS-$(CONFIG_E1000) += e1000.o
@@ -46,13 +47,13 @@
COBJS-$(CONFIG_FTMAC100) += ftmac100.o
COBJS-$(CONFIG_GRETH) += greth.o
COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
-COBJS-$(CONFIG_KIRKWOOD_EGIGA) += kirkwood_egiga.o
COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
COBJS-$(CONFIG_LAN91C96) += lan91c96.o
COBJS-$(CONFIG_MACB) += macb.o
COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
+COBJS-$(CONFIG_MVGBE) += mvgbe.o
COBJS-$(CONFIG_NATSEMI) += natsemi.o
COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
index 2399569..245da12 100644
--- a/drivers/net/at91_emac.c
+++ b/drivers/net/at91_emac.c
@@ -53,6 +53,10 @@
Please decrease the CONFIG_SYS_RX_ETH_BUFFER value
#endif
+#ifndef CONFIG_DRIVER_AT91EMAC_PHYADDR
+#define CONFIG_DRIVER_AT91EMAC_PHYADDR 0
+#endif
+
/* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */
#if (AT91C_MASTER_CLOCK > 80000000)
#define HCLK_DIV AT91_EMAC_CFG_MCLK_64
@@ -198,12 +202,15 @@
emac = (at91_emac_t *) netdev->iobase;
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
- at91emac_write(emac, 0, MII_ADVERTISE, adv);
+ at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
+ MII_ADVERTISE, adv);
VERBOSEP("%s: Starting autonegotiation...\n", netdev->name);
- at91emac_write(emac, 0, MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART));
+ at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR,
+ (BMCR_ANENABLE | BMCR_ANRESTART));
for (i = 0; i < 100000 / 100; i++) {
- at91emac_read(emac, 0, MII_BMSR, &status);
+ at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
+ MII_BMSR, &status);
if (status & BMSR_ANEGCOMPLETE)
break;
udelay(100);
@@ -229,13 +236,15 @@
emac = (at91_emac_t *) netdev->iobase;
/* Check if the PHY is up to snuff... */
- at91emac_read(emac, 0, MII_PHYSID1, &phy_id);
+ at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
+ MII_PHYSID1, &phy_id);
if (phy_id == 0xffff) {
printf("%s: No PHY present\n", netdev->name);
return 1;
}
- at91emac_read(emac, 0, MII_BMSR, &status);
+ at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
+ MII_BMSR, &status);
if (!(status & BMSR_LSTATUS)) {
/* Try to re-negotiate if we don't have link already. */
@@ -243,7 +252,8 @@
return 2;
for (i = 0; i < 100000 / 100; i++) {
- at91emac_read(emac, 0, MII_BMSR, &status);
+ at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
+ MII_BMSR, &status);
if (status & BMSR_LSTATUS)
break;
udelay(100);
@@ -253,8 +263,10 @@
VERBOSEP("%s: link down\n", netdev->name);
return 3;
} else {
- at91emac_read(emac, 0, MII_ADVERTISE, &adv);
- at91emac_read(emac, 0, MII_LPA, &lpa);
+ at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
+ MII_ADVERTISE, &adv);
+ at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
+ MII_LPA, &lpa);
media = mii_nway_result(lpa & adv);
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
? 1 : 0);
@@ -271,7 +283,7 @@
{
unsigned short stat1;
- at91emac_read(emac, 0, MII_BMSR, &stat1);
+ at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1);
if (!(stat1 & BMSR_LSTATUS)) /* link status up? */
return 1;
@@ -348,14 +360,6 @@
writel(1 << AT91_ID_EMAC, &pmc->pcer);
writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl);
- DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
- cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))),
- cpu_to_le32(*((u32 *)netdev->enetaddr)));
- writel(cpu_to_le32(*((u32 *)netdev->enetaddr)), &emac->sa2l);
- writel(cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), &emac->sa2h);
- DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
- readl(&emac->sa2h), readl(&emac->sa2l));
-
/* Init Ethernet buffers */
for (i = 0; i < RBF_FRAMEMAX; i++) {
dev->rbfdt[i].addr = (unsigned long) NetRxPackets[i];
@@ -372,7 +376,7 @@
value = AT91_EMAC_CFG_CAF | AT91_EMAC_CFG_NBC |
HCLK_DIV;
#ifdef CONFIG_RMII
- value |= AT91C_EMAC_RMII;
+ value |= AT91_EMAC_CFG_RMII;
#endif
writel(value, &emac->cfg);
@@ -456,6 +460,25 @@
return 0;
}
+static int at91emac_write_hwaddr(struct eth_device *netdev)
+{
+ emac_device *dev;
+ at91_emac_t *emac;
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ emac = (at91_emac_t *) netdev->iobase;
+ dev = (emac_device *) netdev->priv;
+
+ writel(1 << AT91_ID_EMAC, &pmc->pcer);
+ DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
+ cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))),
+ cpu_to_le32(*((u32 *)netdev->enetaddr)));
+ writel(cpu_to_le32(*((u32 *)netdev->enetaddr)), &emac->sa2l);
+ writel(cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), &emac->sa2h);
+ DEBUG_AT91EMAC("init MAC-ADDR %x%x \n",
+ readl(&emac->sa2h), readl(&emac->sa2l));
+ return 0;
+}
+
int at91emac_register(bd_t *bis, unsigned long iobase)
{
emac_device *emac;
@@ -488,6 +511,7 @@
dev->halt = at91emac_halt;
dev->send = at91emac_send;
dev->recv = at91emac_recv;
+ dev->write_hwaddr = at91emac_write_hwaddr;
eth_register(dev);
diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c
index d843397..bc3e6ad 100644
--- a/drivers/net/ax88180.c
+++ b/drivers/net/ax88180.c
@@ -41,6 +41,7 @@
#include <command.h>
#include <net.h>
#include <malloc.h>
+#include <linux/mii.h>
#include "ax88180.h"
/*
@@ -50,9 +51,9 @@
*/
static void ax88180_rx_handler (struct eth_device *dev);
static int ax88180_phy_initial (struct eth_device *dev);
-static void ax88180_meidia_config (struct eth_device *dev);
-static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev);
-static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev);
+static void ax88180_media_config (struct eth_device *dev);
+static unsigned long get_CicadaPHY_media_mode (struct eth_device *dev);
+static unsigned long get_MarvellPHY_media_mode (struct eth_device *dev);
static unsigned short ax88180_mdio_read (struct eth_device *dev,
unsigned long regaddr);
static void ax88180_mdio_write (struct eth_device *dev,
@@ -112,10 +113,10 @@
{
unsigned short delay_cnt = 500;
- ax88180_mdio_write (dev, BMCR, (PHY_RESET | AUTONEG_EN));
+ ax88180_mdio_write (dev, MII_BMCR, (BMCR_RESET | BMCR_ANENABLE));
/* Wait for the reset to complete, or time out (500 ms) */
- while (ax88180_mdio_read (dev, BMCR) & PHY_RESET) {
+ while (ax88180_mdio_read (dev, MII_BMCR) & BMCR_RESET) {
udelay (1000);
if (--delay_cnt == 0) {
printf ("Failed to reset PHY!\n");
@@ -255,52 +256,78 @@
{
struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
unsigned long tmp_regval;
+ unsigned short phyaddr;
- /* Check avaliable PHY chipset */
- priv->PhyAddr = MARVELL_88E1111_PHYADDR;
- priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+ /* Search for first avaliable PHY chipset */
+#ifdef CONFIG_PHY_ADDR
+ phyaddr = CONFIG_PHY_ADDR;
+#else
+ for (phyaddr = 0; phyaddr < 32; ++phyaddr)
+#endif
+ {
+ priv->PhyAddr = phyaddr;
+ priv->PhyID0 = ax88180_mdio_read(dev, MII_PHYSID1);
+ priv->PhyID1 = ax88180_mdio_read(dev, MII_PHYSID2);
- if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
+ switch (priv->PhyID0) {
+ case MARVELL_ALASKA_PHYSID0:
+ debug("ax88180: Found Marvell Alaska PHY family."
+ " (PHY Addr=0x%x)\n", priv->PhyAddr);
- debug ("ax88180: Found Marvell 88E1111 PHY."
- " (PHY Addr=0x%x)\n", priv->PhyAddr);
+ switch (priv->PhyID1) {
+ case MARVELL_88E1118_PHYSID1:
+ ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 2);
+ ax88180_mdio_write(dev, M88E1118_CR,
+ M88E1118_CR_DEFAULT);
+ ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 3);
+ ax88180_mdio_write(dev, M88E1118_LEDCTL,
+ M88E1118_LEDCTL_DEFAULT);
+ ax88180_mdio_write(dev, M88E1118_LEDMIX,
+ M88E1118_LEDMIX_LED050 | M88E1118_LEDMIX_LED150 | 0x15);
+ ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 0);
+ default: /* Default to 88E1111 Phy */
+ tmp_regval = ax88180_mdio_read(dev, M88E1111_EXT_SSR);
+ if ((tmp_regval & HWCFG_MODE_MASK) != RGMII_COPPER_MODE)
+ ax88180_mdio_write(dev, M88E1111_EXT_SCR,
+ DEFAULT_EXT_SCR);
+ }
- tmp_regval = ax88180_mdio_read (dev, M88_EXT_SSR);
- if ((tmp_regval & HWCFG_MODE_MASK) == RGMII_COPPER_MODE) {
-
- ax88180_mdio_write (dev, M88_EXT_SCR, DEFAULT_EXT_SCR);
- if (ax88180_phy_reset (dev) < 0)
+ if (ax88180_phy_reset(dev) < 0)
return 0;
- ax88180_mdio_write (dev, M88_IER, LINK_CHANGE_INT);
- }
- } else {
+ ax88180_mdio_write(dev, M88_IER, LINK_CHANGE_INT);
- priv->PhyAddr = CICADA_CIS8201_PHYADDR;
- priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+ return 1;
- if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
+ case CICADA_CIS8201_PHYSID0:
+ debug("ax88180: Found CICADA CIS8201 PHY"
+ " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr);
- debug ("ax88180: Found CICADA CIS8201 PHY"
- " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr);
- ax88180_mdio_write (dev, CIS_IMR,
+ ax88180_mdio_write(dev, CIS_IMR,
(CIS_INT_ENABLE | LINK_CHANGE_INT));
/* Set CIS_SMI_PRIORITY bit before force the media mode */
- tmp_regval =
- ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS);
+ tmp_regval = ax88180_mdio_read(dev, CIS_AUX_CTRL_STATUS);
tmp_regval &= ~CIS_SMI_PRIORITY;
- ax88180_mdio_write (dev, CIS_AUX_CTRL_STATUS,
- tmp_regval);
- } else {
- printf ("ax88180: Unknown PHY chipset!!\n");
- return 0;
+ ax88180_mdio_write(dev, CIS_AUX_CTRL_STATUS, tmp_regval);
+
+ return 1;
+
+ case 0xffff:
+ /* No PHY at this addr */
+ break;
+
+ default:
+ printf("ax88180: Unknown PHY chipset %#x at addr %#x\n",
+ priv->PhyID0, priv->PhyAddr);
+ break;
}
}
- return 1;
+ printf("ax88180: Unknown PHY chipset!!\n");
+ return 0;
}
-static void ax88180_meidia_config (struct eth_device *dev)
+static void ax88180_media_config (struct eth_device *dev)
{
struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
unsigned long bmcr_val, bmsr_val;
@@ -310,20 +337,20 @@
/* Waiting 2 seconds for PHY link stable */
for (i = 0; i < 20000; i++) {
- bmsr_val = ax88180_mdio_read (dev, BMSR);
- if (bmsr_val & LINKOK) {
+ bmsr_val = ax88180_mdio_read (dev, MII_BMSR);
+ if (bmsr_val & BMSR_LSTATUS) {
break;
}
udelay (100);
}
- bmsr_val = ax88180_mdio_read (dev, BMSR);
+ bmsr_val = ax88180_mdio_read (dev, MII_BMSR);
debug ("ax88180: BMSR=0x%04x\n", (unsigned int)bmsr_val);
- if (bmsr_val & LINKOK) {
- bmcr_val = ax88180_mdio_read (dev, BMCR);
+ if (bmsr_val & BMSR_LSTATUS) {
+ bmcr_val = ax88180_mdio_read (dev, MII_BMCR);
- if (bmcr_val & AUTONEG_EN) {
+ if (bmcr_val & BMCR_ANENABLE) {
/*
* Waiting for Auto-negotiation completion, this may
@@ -332,8 +359,8 @@
debug ("ax88180: Auto-negotiation is "
"enabled. Waiting for NWay completion..\n");
for (i = 0; i < 50000; i++) {
- bmsr_val = ax88180_mdio_read (dev, BMSR);
- if (bmsr_val & AUTONEG_COMPLETE) {
+ bmsr_val = ax88180_mdio_read (dev, MII_BMSR);
+ if (bmsr_val & BMSR_ANEGCOMPLETE) {
break;
}
udelay (100);
@@ -345,12 +372,16 @@
(unsigned int)bmcr_val, (unsigned int)bmsr_val);
/* Get real media mode here */
- if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
- RealMediaMode = get_MarvellPHY_meida_mode (dev);
- } else if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
- RealMediaMode = get_CicadaPHY_meida_mode (dev);
- } else {
+ switch (priv->PhyID0) {
+ case MARVELL_ALASKA_PHYSID0:
+ RealMediaMode = get_MarvellPHY_media_mode(dev);
+ break;
+ case CICADA_CIS8201_PHYSID0:
+ RealMediaMode = get_CicadaPHY_media_mode(dev);
+ break;
+ default:
RealMediaMode = MEDIA_1000FULL;
+ break;
}
priv->LinkState = INS_LINK_UP;
@@ -424,7 +455,7 @@
return;
}
-static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev)
+static unsigned long get_MarvellPHY_media_mode (struct eth_device *dev)
{
unsigned long m88_ssr;
unsigned long MediaMode;
@@ -457,7 +488,7 @@
return MediaMode;
}
-static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev)
+static unsigned long get_CicadaPHY_media_mode (struct eth_device *dev)
{
unsigned long tmp_regval;
unsigned long MediaMode;
@@ -522,7 +553,7 @@
dev->enetaddr[4] | (((unsigned short)dev->enetaddr[5]) << 8);
OUTW (dev, tmp_regval, MACID2);
- ax88180_meidia_config (dev);
+ ax88180_media_config (dev);
OUTW (dev, DEFAULT_RXFILTER, RXFILTER);
@@ -558,7 +589,7 @@
if (ISR_Status & ISR_PHY) {
/* Read ISR register once to clear PHY interrupt bit */
tmp_regval = ax88180_mdio_read (dev, M88_ISR);
- ax88180_meidia_config (dev);
+ ax88180_media_config (dev);
}
if ((ISR_Status & ISR_RX) || (ISR_Status & ISR_RXBUFFOVR)) {
diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h
index d2113df..daf18e0 100644
--- a/drivers/net/ax88180.h
+++ b/drivers/net/ax88180.h
@@ -19,6 +19,7 @@
#ifndef _AX88180_H_
#define _AX88180_H_
+#include <asm/io.h>
#include <asm/types.h>
#include <config.h>
@@ -33,6 +34,7 @@
unsigned char PadSize;
unsigned short PhyAddr;
unsigned short PhyID0;
+ unsigned short PhyID1;
unsigned short FirstTxDesc;
unsigned short NextTxDesc;
ax88180_link_state LinkState;
@@ -63,11 +65,10 @@
/* Max Rx Jumbo size is 15K Bytes */
#define MAX_RX_SIZE 0x3C00
-#define MARVELL_88E1111_PHYADDR 0x18
-#define MARVELL_88E1111_PHYIDR0 0x0141
+#define MARVELL_ALASKA_PHYSID0 0x141
+#define MARVELL_88E1118_PHYSID1 0xE40
-#define CICADA_CIS8201_PHYADDR 0x01
-#define CICADA_CIS8201_PHYIDR0 0x000F
+#define CICADA_CIS8201_PHYSID0 0x000F
#define MEDIA_AUTO 0
#define MEDIA_1000FULL 1
@@ -278,50 +279,6 @@
#define SOFTRST_NORMAL 0x00000003
#define SOFTRST_RESET_MAC 0x00000002
-/* External PHY Register Definition */
-#define BMCR 0x0000
- #define LINE_SPEED_MSB 0x0040
- #define DUPLEX_MODE 0x0100
- #define RESTART_AUTONEG 0x0200
- #define POWER_DOWN 0x0800
- #define AUTONEG_EN 0x1000
- #define LINE_SPEED_LSB 0x2000
- #define PHY_RESET 0x8000
-
- #define MEDIAMODE_MASK (LINE_SPEED_MSB | LINE_SPEED_LSB |\
- DUPLEX_MODE)
- #define BMCR_SPEED_1000 LINE_SPEED_MSB
- #define BMCR_SPEED_100 LINE_SPEED_LSB
- #define BMCR_SPEED_10 0x0000
-
- #define BMCR_1000FULL (BMCR_SPEED_1000 | DUPLEX_MODE)
- #define BMCR_100FULL (BMCR_SPEED_100 | DUPLEX_MODE)
- #define BMCR_100HALF BMCR_SPEED_100
- #define BMCR_10FULL DUPLEX_MODE
- #define BMCR_10HALF 0x0000
-#define BMSR 0x0001
- #define LINKOK 0x0004
- #define AUTONEG_ENABLE_STS 0x0008
- #define AUTONEG_COMPLETE 0x0020
-#define PHYIDR0 0x0002
-#define PHYIDR1 0x0003
-#define ANAR 0x0004
- #define ANAR_PAUSE 0x0400
- #define ANAR_100FULL 0x0100
- #define ANAR_100HALF 0x0080
- #define ANAR_10FULL 0x0040
- #define ANAR_10HALF 0x0020
- #define ANAR_8023BIT 0x0001
-#define ANLPAR 0x0005
-#define ANER 0x0006
-#define AUX_1000_CTRL 0x0009
- #define ENABLE_1000HALF 0x0100
- #define ENABLE_1000FULL 0x0200
- #define DEFAULT_AUX_1000_CTRL (ENABLE_1000HALF | ENABLE_1000FULL)
-#define AUX_1000_STATUS 0x000A
- #define LP_1000HALF 0x0400
- #define LP_1000FULL 0x0800
-
/* Marvell 88E1111 Gigabit PHY Register Definition */
#define M88_SSR 0x0011
#define SSR_SPEED_MASK 0xC000
@@ -342,14 +299,36 @@
#define LINK_CHANGE_INT 0x0400
#define M88_ISR 0x0013
#define LINK_CHANGE_STATUS 0x0400
-#define M88_EXT_SCR 0x0014
+#define M88E1111_EXT_SCR 0x0014
#define RGMII_RXCLK_DELAY 0x0080
#define RGMII_TXCLK_DELAY 0x0002
#define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY)
-#define M88_EXT_SSR 0x001B
+#define M88E1111_EXT_SSR 0x001B
#define HWCFG_MODE_MASK 0x000F
#define RGMII_COPPER_MODE 0x000B
+/* Marvell 88E1118 Gigabit PHY Register Definition */
+#define M88E1118_CR 0x14
+ #define M88E1118_CR_RGMII_RXCLK_DELAY 0x0020
+ #define M88E1118_CR_RGMII_TXCLK_DELAY 0x0010
+ #define M88E1118_CR_DEFAULT (M88E1118_CR_RGMII_TXCLK_DELAY | \
+ M88E1118_CR_RGMII_RXCLK_DELAY)
+#define M88E1118_LEDCTL 0x10 /* Reg 16 on page 3 */
+ #define M88E1118_LEDCTL_LED2INT 0x200
+ #define M88E1118_LEDCTL_LED2BLNK 0x400
+ #define M88E1118_LEDCTL_LED0DUALMODE1 0xc
+ #define M88E1118_LEDCTL_LED0DUALMODE2 0xd
+ #define M88E1118_LEDCTL_LED0DUALMODE3 0xe
+ #define M88E1118_LEDCTL_LED0DUALMODE4 0xf
+ #define M88E1118_LEDCTL_DEFAULT (M88E1118_LEDCTL_LED2BLNK | \
+ M88E1118_LEDCTL_LED0DUALMODE4)
+
+#define M88E1118_LEDMIX 0x11 /* Reg 17 on page 3 */
+ #define M88E1118_LEDMIX_LED050 0x4
+ #define M88E1118_LEDMIX_LED150 0x8
+
+#define M88E1118_PAGE_SEL 0x16 /* Reg page select */
+
/* CICADA CIS8201 Gigabit PHY Register Definition */
#define CIS_IMR 0x0019
#define CIS_INT_ENABLE 0x8000
@@ -376,36 +355,41 @@
static inline unsigned short INW (struct eth_device *dev, unsigned long addr)
{
- return le16_to_cpu (*(volatile unsigned short *) (addr + dev->iobase));
-}
-
-static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
-{
- *(volatile unsigned short *) ((addr + dev->iobase)) = cpu_to_le16 (command);
+ return le16_to_cpu(readw(addr + (void *)dev->iobase));
}
/*
Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer
*/
#if defined (CONFIG_DRIVER_AX88180_16BIT)
+static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
+{
+ writew(cpu_to_le16(command), addr + (void *)dev->iobase);
+}
+
static inline unsigned short READ_RXBUF (struct eth_device *dev)
{
- return le16_to_cpu (*(volatile unsigned short *) (RXBUFFER_START + dev->iobase));
+ return le16_to_cpu(readw(RXBUFFER_START + (void *)dev->iobase));
}
static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data)
{
- *(volatile unsigned short *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le16 (data);
+ writew(cpu_to_le16(data), TXBUFFER_START + (void *)dev->iobase);
}
#else
+static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
+{
+ writel(cpu_to_le32(command), addr + (void *)dev->iobase);
+}
+
static inline unsigned long READ_RXBUF (struct eth_device *dev)
{
- return le32_to_cpu (*(volatile unsigned long *) (RXBUFFER_START + dev->iobase));
+ return le32_to_cpu(readl(RXBUFFER_START + (void *)dev->iobase));
}
static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data)
{
- *(volatile unsigned long *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le32 (data);
+ writel(cpu_to_le32(data), TXBUFFER_START + (void *)dev->iobase);
}
#endif
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 720e126..e691bdf 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -16,6 +16,7 @@
#include <linux/mii.h>
#include <asm/blackfin.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/dma.h>
#include <asm/mach-common/bits/emac.h>
#include <asm/mach-common/bits/pll.h>
@@ -98,7 +99,7 @@
hang();
memset(dev, 0, sizeof(*dev));
- sprintf(dev->name, "Blackfin EMAC");
+ strcpy(dev->name, "bfin_mac");
dev->iobase = 0;
dev->priv = 0;
@@ -213,8 +214,17 @@
/* MDC = SCLK / MDC_freq / 2 - 1 */
#define MDC_FREQ_TO_DIV(mdc_freq) (get_sclk() / (mdc_freq) / 2 - 1)
+#ifndef CONFIG_BFIN_MAC_PINS
+# ifdef CONFIG_RMII
+# define CONFIG_BFIN_MAC_PINS P_RMII0
+# else
+# define CONFIG_BFIN_MAC_PINS P_MII0
+# endif
+#endif
+
static int bfin_miiphy_init(struct eth_device *dev, int *opmode)
{
+ const unsigned short pins[] = CONFIG_BFIN_MAC_PINS;
u16 phydat;
size_t count;
@@ -222,42 +232,7 @@
*pVR_CTL |= CLKBUFOE;
/* Set all the pins to peripheral mode */
-#ifdef CONFIG_RMII
- /* grab RMII pins */
-# if defined(__ADSPBF51x__)
- *pPORTF_MUX = (*pPORTF_MUX & \
- ~(PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \
- PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1;
- *pPORTF_FER |= PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15;
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1;
- *pPORTG_FER |= PG0 | PG1 | PG2;
-# elif defined(__ADSPBF52x__)
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2;
- *pPORTG_FER |= PG14 | PG15;
- *pPORTH_MUX = (*pPORTH_MUX & ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK)) | \
- PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2;
- *pPORTH_FER |= PH0 | PH1 | PH2 | PH3 | PH4 | PH5 | PH6 | PH7 | PH8;
-# else
- *pPORTH_FER |= PH0 | PH1 | PH4 | PH5 | PH6 | PH8 | PH9 | PH14 | PH15;
-# endif
-#else
- /* grab MII & RMII pins */
-# if defined(__ADSPBF51x__)
- *pPORTF_MUX = (*pPORTF_MUX & \
- ~(PORT_x_MUX_0_MASK | PORT_x_MUX_1_MASK | PORT_x_MUX_3_MASK | PORT_x_MUX_4_MASK | PORT_x_MUX_5_MASK)) | \
- PORT_x_MUX_0_FUNC_1 | PORT_x_MUX_1_FUNC_1 | PORT_x_MUX_3_FUNC_1 | PORT_x_MUX_4_FUNC_1 | PORT_x_MUX_5_FUNC_1;
- *pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF8 | PF9 | PF10 | PF11 | PF12 | PF13 | PF14 | PF15;
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_1;
- *pPORTG_FER |= PG0 | PG1 | PG2;
-# elif defined(__ADSPBF52x__)
- *pPORTG_MUX = (*pPORTG_MUX & ~PORT_x_MUX_6_MASK) | PORT_x_MUX_6_FUNC_2;
- *pPORTG_FER |= PG14 | PG15;
- *pPORTH_MUX = PORT_x_MUX_0_FUNC_2 | PORT_x_MUX_1_FUNC_2 | PORT_x_MUX_2_FUNC_2;
- *pPORTH_FER = -1; /* all pins */
-# else
- *pPORTH_FER = -1; /* all pins */
-# endif
-#endif
+ peripheral_request_list(pins, "bfin_mac");
/* Odd word alignment for Receive Frame DMA word */
/* Configure checksum support and rcve frame word alignment */
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
new file mode 100644
index 0000000..d0d9827
--- /dev/null
+++ b/drivers/net/designware.c
@@ -0,0 +1,531 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Designware ethernet IP driver for u-boot
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <malloc.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include "designware.h"
+
+static void tx_descs_init(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
+ char *txbuffs = &priv->txbuffs[0];
+ struct dmamacdescr *desc_p;
+ u32 idx;
+
+ for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
+ desc_p = &desc_table_p[idx];
+ desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
+ desc_p->dmamac_next = &desc_table_p[idx + 1];
+
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+ desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
+ DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
+ DESC_TXSTS_TXCHECKINSCTRL | \
+ DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
+
+ desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
+ desc_p->dmamac_cntl = 0;
+ desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
+#else
+ desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
+ desc_p->txrx_status = 0;
+#endif
+ }
+
+ /* Correcting the last pointer of the chain */
+ desc_p->dmamac_next = &desc_table_p[0];
+
+ writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
+}
+
+static void rx_descs_init(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
+ char *rxbuffs = &priv->rxbuffs[0];
+ struct dmamacdescr *desc_p;
+ u32 idx;
+
+ for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
+ desc_p = &desc_table_p[idx];
+ desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
+ desc_p->dmamac_next = &desc_table_p[idx + 1];
+
+ desc_p->dmamac_cntl =
+ (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
+ DESC_RXCTRL_RXCHAIN;
+
+ desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
+ }
+
+ /* Correcting the last pointer of the chain */
+ desc_p->dmamac_next = &desc_table_p[0];
+
+ writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
+}
+
+static void descs_init(struct eth_device *dev)
+{
+ tx_descs_init(dev);
+ rx_descs_init(dev);
+}
+
+static int mac_reset(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+
+ int timeout = CONFIG_MACRESET_TIMEOUT;
+
+ writel(DMAMAC_SRST, &dma_p->busmode);
+ writel(MII_PORTSELECT, &mac_p->conf);
+
+ do {
+ if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
+ return 0;
+ udelay(1000);
+ } while (timeout--);
+
+ return -1;
+}
+
+static int dw_write_hwaddr(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u32 macid_lo, macid_hi;
+ u8 *mac_id = &dev->enetaddr[0];
+
+ macid_lo = mac_id[0] + (mac_id[1] << 8) + \
+ (mac_id[2] << 16) + (mac_id[3] << 24);
+ macid_hi = mac_id[4] + (mac_id[5] << 8);
+
+ writel(macid_hi, &mac_p->macaddr0hi);
+ writel(macid_lo, &mac_p->macaddr0lo);
+
+ return 0;
+}
+
+static int dw_eth_init(struct eth_device *dev, bd_t *bis)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ u32 conf;
+
+ /* Reset ethernet hardware */
+ if (mac_reset(dev) < 0)
+ return -1;
+
+ writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
+ &dma_p->busmode);
+
+ writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
+ writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
+
+ conf = FRAMEBURSTENABLE | DISABLERXOWN;
+
+ if (priv->speed != SPEED_1000M)
+ conf |= MII_PORTSELECT;
+
+ if (priv->duplex == FULL_DUPLEX)
+ conf |= FULLDPLXMODE;
+
+ writel(conf, &mac_p->conf);
+
+ descs_init(dev);
+
+ /*
+ * Start/Enable xfer at dma as well as mac level
+ */
+ writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
+ writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
+
+ writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf);
+ writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf);
+
+ return 0;
+}
+
+static int dw_eth_send(struct eth_device *dev, volatile void *packet,
+ int length)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ u32 desc_num = priv->tx_currdescnum;
+ struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
+
+ /* Check if the descriptor is owned by CPU */
+ if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
+ printf("CPU not owner of tx frame\n");
+ return -1;
+ }
+
+ memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
+
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+ desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
+ desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
+ DESC_TXCTRL_SIZE1MASK;
+
+ desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
+ desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
+#else
+ desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
+ DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
+ DESC_TXCTRL_TXFIRST;
+
+ desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
+#endif
+
+ /* Test the wrap-around condition. */
+ if (++desc_num >= CONFIG_TX_DESCR_NUM)
+ desc_num = 0;
+
+ priv->tx_currdescnum = desc_num;
+
+ /* Start the transmission */
+ writel(POLL_DATA, &dma_p->txpolldemand);
+
+ return 0;
+}
+
+static int dw_eth_recv(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ u32 desc_num = priv->rx_currdescnum;
+ struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
+
+ u32 status = desc_p->txrx_status;
+ int length = 0;
+
+ /* Check if the owner is the CPU */
+ if (!(status & DESC_RXSTS_OWNBYDMA)) {
+
+ length = (status & DESC_RXSTS_FRMLENMSK) >> \
+ DESC_RXSTS_FRMLENSHFT;
+
+ NetReceive(desc_p->dmamac_addr, length);
+
+ /*
+ * Make the current descriptor valid again and go to
+ * the next one
+ */
+ desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
+
+ /* Test the wrap-around condition. */
+ if (++desc_num >= CONFIG_RX_DESCR_NUM)
+ desc_num = 0;
+ }
+
+ priv->rx_currdescnum = desc_num;
+
+ return length;
+}
+
+static void dw_eth_halt(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+
+ mac_reset(dev);
+ priv->tx_currdescnum = priv->rx_currdescnum = 0;
+}
+
+static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u32 miiaddr;
+ int timeout = CONFIG_MDIO_TIMEOUT;
+
+ miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
+ ((reg << MIIREGSHIFT) & MII_REGMSK);
+
+ writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
+
+ do {
+ if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
+ *val = readl(&mac_p->miidata);
+ return 0;
+ }
+ udelay(1000);
+ } while (timeout--);
+
+ return -1;
+}
+
+static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u32 miiaddr;
+ int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
+ u16 value;
+
+ writel(val, &mac_p->miidata);
+ miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
+ ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
+
+ writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
+
+ do {
+ if (!(readl(&mac_p->miiaddr) & MII_BUSY))
+ ret = 0;
+ udelay(1000);
+ } while (timeout--);
+
+ /* Needed as a fix for ST-Phy */
+ eth_mdio_read(dev, addr, reg, &value);
+
+ return ret;
+}
+
+#if defined(CONFIG_DW_SEARCH_PHY)
+static int find_phy(struct eth_device *dev)
+{
+ int phy_addr = 0;
+ u16 ctrl, oldctrl;
+
+ do {
+ eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
+ oldctrl = ctrl & PHY_BMCR_AUTON;
+
+ ctrl ^= PHY_BMCR_AUTON;
+ eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
+ eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
+ ctrl &= PHY_BMCR_AUTON;
+
+ if (ctrl == oldctrl) {
+ phy_addr++;
+ } else {
+ ctrl ^= PHY_BMCR_AUTON;
+ eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
+
+ return phy_addr;
+ }
+ } while (phy_addr < 32);
+
+ return -1;
+}
+#endif
+
+static int dw_reset_phy(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ u16 ctrl;
+ int timeout = CONFIG_PHYRESET_TIMEOUT;
+ u32 phy_addr = priv->address;
+
+ eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
+ do {
+ eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
+ if (!(ctrl & PHY_BMCR_RESET))
+ break;
+ udelay(1000);
+ } while (timeout--);
+
+ if (timeout < 0)
+ return -1;
+
+#ifdef CONFIG_PHY_RESET_DELAY
+ udelay(CONFIG_PHY_RESET_DELAY);
+#endif
+ return 0;
+}
+
+static int configure_phy(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ int phy_addr;
+ u16 bmcr, ctrl;
+#if defined(CONFIG_DW_AUTONEG)
+ u16 bmsr;
+ u32 timeout;
+ u16 anlpar, btsr;
+#endif
+
+#if defined(CONFIG_DW_SEARCH_PHY)
+ phy_addr = find_phy(dev);
+ if (phy_addr > 0)
+ priv->address = phy_addr;
+ else
+ return -1;
+#endif
+ if (dw_reset_phy(dev) < 0)
+ return -1;
+
+#if defined(CONFIG_DW_AUTONEG)
+ bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
+ PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
+#else
+ bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
+
+#if defined(CONFIG_DW_SPEED10M)
+ bmcr &= ~PHY_BMCR_100MB;
+#endif
+#if defined(CONFIG_DW_DUPLEXHALF)
+ bmcr &= ~PHY_BMCR_DPLX;
+#endif
+#endif
+ if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0)
+ return -1;
+
+ /* Read the phy status register and populate priv structure */
+#if defined(CONFIG_DW_AUTONEG)
+ timeout = CONFIG_AUTONEG_TIMEOUT;
+ do {
+ eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr);
+ if (bmsr & PHY_BMSR_AUTN_COMP)
+ break;
+ udelay(1000);
+ } while (timeout--);
+
+ eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar);
+ eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr);
+
+ if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+ priv->speed = SPEED_1000M;
+ if (btsr & PHY_1000BTSR_1000FD)
+ priv->duplex = FULL_DUPLEX;
+ else
+ priv->duplex = HALF_DUPLEX;
+ } else {
+ if (anlpar & PHY_ANLPAR_100)
+ priv->speed = SPEED_100M;
+ else
+ priv->speed = SPEED_10M;
+
+ if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ priv->duplex = FULL_DUPLEX;
+ else
+ priv->duplex = HALF_DUPLEX;
+ }
+#else
+ if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0)
+ return -1;
+
+ if (ctrl & PHY_BMCR_DPLX)
+ priv->duplex = FULL_DUPLEX;
+ else
+ priv->duplex = HALF_DUPLEX;
+
+ if (ctrl & PHY_BMCR_1000_MBPS)
+ priv->speed = SPEED_1000M;
+ else if (ctrl & PHY_BMCR_100_MBPS)
+ priv->speed = SPEED_100M;
+ else
+ priv->speed = SPEED_10M;
+#endif
+ return 0;
+}
+
+#if defined(CONFIG_MII)
+static int dw_mii_read(char *devname, u8 addr, u8 reg, u16 *val)
+{
+ struct eth_device *dev;
+
+ dev = eth_get_dev_by_name(devname);
+ if (dev)
+ eth_mdio_read(dev, addr, reg, val);
+
+ return 0;
+}
+
+static int dw_mii_write(char *devname, u8 addr, u8 reg, u16 val)
+{
+ struct eth_device *dev;
+
+ dev = eth_get_dev_by_name(devname);
+ if (dev)
+ eth_mdio_write(dev, addr, reg, val);
+
+ return 0;
+}
+#endif
+
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
+{
+ struct eth_device *dev;
+ struct dw_eth_dev *priv;
+
+ dev = (struct eth_device *) malloc(sizeof(struct eth_device));
+ if (!dev)
+ return -ENOMEM;
+
+ /*
+ * Since the priv structure contains the descriptors which need a strict
+ * buswidth alignment, memalign is used to allocate memory
+ */
+ priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
+ if (!priv) {
+ free(dev);
+ return -ENOMEM;
+ }
+
+ memset(dev, 0, sizeof(struct eth_device));
+ memset(priv, 0, sizeof(struct dw_eth_dev));
+
+ sprintf(dev->name, "mii%d", id);
+ dev->iobase = (int)base_addr;
+ dev->priv = priv;
+
+ eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
+
+ priv->dev = dev;
+ priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
+ priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
+ DW_DMA_BASE_OFFSET);
+ priv->address = phy_addr;
+
+ if (mac_reset(dev) < 0)
+ return -1;
+
+ if (configure_phy(dev) < 0) {
+ printf("Phy could not be configured\n");
+ return -1;
+ }
+
+ dev->init = dw_eth_init;
+ dev->send = dw_eth_send;
+ dev->recv = dw_eth_recv;
+ dev->halt = dw_eth_halt;
+ dev->write_hwaddr = dw_write_hwaddr;
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII)
+ miiphy_register(dev->name, dw_mii_read, dw_mii_write);
+#endif
+ return 1;
+}
diff --git a/drivers/net/designware.h b/drivers/net/designware.h
new file mode 100644
index 0000000..e5828a6
--- /dev/null
+++ b/drivers/net/designware.h
@@ -0,0 +1,264 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _DW_ETH_H
+#define _DW_ETH_H
+
+#define CONFIG_TX_DESCR_NUM 16
+#define CONFIG_RX_DESCR_NUM 16
+#define CONFIG_ETH_BUFSIZE 2048
+#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
+#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
+
+#define CONFIG_MACRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
+#define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ)
+#define CONFIG_PHYRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
+#define CONFIG_AUTONEG_TIMEOUT (5 * CONFIG_SYS_HZ)
+
+struct eth_mac_regs {
+ u32 conf; /* 0x00 */
+ u32 framefilt; /* 0x04 */
+ u32 hashtablehigh; /* 0x08 */
+ u32 hashtablelow; /* 0x0c */
+ u32 miiaddr; /* 0x10 */
+ u32 miidata; /* 0x14 */
+ u32 flowcontrol; /* 0x18 */
+ u32 vlantag; /* 0x1c */
+ u32 version; /* 0x20 */
+ u8 reserved_1[20];
+ u32 intreg; /* 0x38 */
+ u32 intmask; /* 0x3c */
+ u32 macaddr0hi; /* 0x40 */
+ u32 macaddr0lo; /* 0x44 */
+};
+
+/* MAC configuration register definitions */
+#define FRAMEBURSTENABLE (1 << 21)
+#define MII_PORTSELECT (1 << 15)
+#define FES_100 (1 << 14)
+#define DISABLERXOWN (1 << 13)
+#define FULLDPLXMODE (1 << 11)
+#define RXENABLE (1 << 2)
+#define TXENABLE (1 << 3)
+
+/* MII address register definitions */
+#define MII_BUSY (1 << 0)
+#define MII_WRITE (1 << 1)
+#define MII_CLKRANGE_60_100M (0)
+#define MII_CLKRANGE_100_150M (0x4)
+#define MII_CLKRANGE_20_35M (0x8)
+#define MII_CLKRANGE_35_60M (0xC)
+#define MII_CLKRANGE_150_250M (0x10)
+#define MII_CLKRANGE_250_300M (0x14)
+
+#define MIIADDRSHIFT (11)
+#define MIIREGSHIFT (6)
+#define MII_REGMSK (0x1F << 6)
+#define MII_ADDRMSK (0x1F << 11)
+
+
+struct eth_dma_regs {
+ u32 busmode; /* 0x00 */
+ u32 txpolldemand; /* 0x04 */
+ u32 rxpolldemand; /* 0x08 */
+ u32 rxdesclistaddr; /* 0x0c */
+ u32 txdesclistaddr; /* 0x10 */
+ u32 status; /* 0x14 */
+ u32 opmode; /* 0x18 */
+ u32 intenable; /* 0x1c */
+ u8 reserved[40];
+ u32 currhosttxdesc; /* 0x48 */
+ u32 currhostrxdesc; /* 0x4c */
+ u32 currhosttxbuffaddr; /* 0x50 */
+ u32 currhostrxbuffaddr; /* 0x54 */
+};
+
+#define DW_DMA_BASE_OFFSET (0x1000)
+
+/* Bus mode register definitions */
+#define FIXEDBURST (1 << 16)
+#define PRIORXTX_41 (3 << 14)
+#define PRIORXTX_31 (2 << 14)
+#define PRIORXTX_21 (1 << 14)
+#define PRIORXTX_11 (0 << 14)
+#define BURST_1 (1 << 8)
+#define BURST_2 (2 << 8)
+#define BURST_4 (4 << 8)
+#define BURST_8 (8 << 8)
+#define BURST_16 (16 << 8)
+#define BURST_32 (32 << 8)
+#define RXHIGHPRIO (1 << 1)
+#define DMAMAC_SRST (1 << 0)
+
+/* Poll demand definitions */
+#define POLL_DATA (0xFFFFFFFF)
+
+/* Operation mode definitions */
+#define STOREFORWARD (1 << 21)
+#define FLUSHTXFIFO (1 << 20)
+#define TXSTART (1 << 13)
+#define TXSECONDFRAME (1 << 2)
+#define RXSTART (1 << 1)
+
+/* Descriptior related definitions */
+#define MAC_MAX_FRAME_SZ (2048)
+
+struct dmamacdescr {
+ u32 txrx_status;
+ u32 dmamac_cntl;
+ void *dmamac_addr;
+ struct dmamacdescr *dmamac_next;
+};
+
+/*
+ * txrx_status definitions
+ */
+
+/* tx status bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_TXSTS_OWNBYDMA (1 << 31)
+#define DESC_TXSTS_TXINT (1 << 30)
+#define DESC_TXSTS_TXLAST (1 << 29)
+#define DESC_TXSTS_TXFIRST (1 << 28)
+#define DESC_TXSTS_TXCRCDIS (1 << 27)
+
+#define DESC_TXSTS_TXPADDIS (1 << 26)
+#define DESC_TXSTS_TXCHECKINSCTRL (3 << 22)
+#define DESC_TXSTS_TXRINGEND (1 << 21)
+#define DESC_TXSTS_TXCHAIN (1 << 20)
+#define DESC_TXSTS_MSK (0x1FFFF << 0)
+
+#else
+
+#define DESC_TXSTS_OWNBYDMA (1 << 31)
+#define DESC_TXSTS_MSK (0x1FFFF << 0)
+
+#endif
+
+/* rx status bits definitions */
+#define DESC_RXSTS_OWNBYDMA (1 << 31)
+#define DESC_RXSTS_DAFILTERFAIL (1 << 30)
+#define DESC_RXSTS_FRMLENMSK (0x3FFF << 16)
+#define DESC_RXSTS_FRMLENSHFT (16)
+
+#define DESC_RXSTS_ERROR (1 << 15)
+#define DESC_RXSTS_RXTRUNCATED (1 << 14)
+#define DESC_RXSTS_SAFILTERFAIL (1 << 13)
+#define DESC_RXSTS_RXIPC_GIANTFRAME (1 << 12)
+#define DESC_RXSTS_RXDAMAGED (1 << 11)
+#define DESC_RXSTS_RXVLANTAG (1 << 10)
+#define DESC_RXSTS_RXFIRST (1 << 9)
+#define DESC_RXSTS_RXLAST (1 << 8)
+#define DESC_RXSTS_RXIPC_GIANT (1 << 7)
+#define DESC_RXSTS_RXCOLLISION (1 << 6)
+#define DESC_RXSTS_RXFRAMEETHER (1 << 5)
+#define DESC_RXSTS_RXWATCHDOG (1 << 4)
+#define DESC_RXSTS_RXMIIERROR (1 << 3)
+#define DESC_RXSTS_RXDRIBBLING (1 << 2)
+#define DESC_RXSTS_RXCRC (1 << 1)
+
+/*
+ * dmamac_cntl definitions
+ */
+
+/* tx control bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_TXCTRL_SIZE1MASK (0x1FFF << 0)
+#define DESC_TXCTRL_SIZE1SHFT (0)
+#define DESC_TXCTRL_SIZE2MASK (0x1FFF << 16)
+#define DESC_TXCTRL_SIZE2SHFT (16)
+
+#else
+
+#define DESC_TXCTRL_TXINT (1 << 31)
+#define DESC_TXCTRL_TXLAST (1 << 30)
+#define DESC_TXCTRL_TXFIRST (1 << 29)
+#define DESC_TXCTRL_TXCHECKINSCTRL (3 << 27)
+#define DESC_TXCTRL_TXCRCDIS (1 << 26)
+#define DESC_TXCTRL_TXRINGEND (1 << 25)
+#define DESC_TXCTRL_TXCHAIN (1 << 24)
+
+#define DESC_TXCTRL_SIZE1MASK (0x7FF << 0)
+#define DESC_TXCTRL_SIZE1SHFT (0)
+#define DESC_TXCTRL_SIZE2MASK (0x7FF << 11)
+#define DESC_TXCTRL_SIZE2SHFT (11)
+
+#endif
+
+/* rx control bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_RXCTRL_RXINTDIS (1 << 31)
+#define DESC_RXCTRL_RXRINGEND (1 << 15)
+#define DESC_RXCTRL_RXCHAIN (1 << 14)
+
+#define DESC_RXCTRL_SIZE1MASK (0x1FFF << 0)
+#define DESC_RXCTRL_SIZE1SHFT (0)
+#define DESC_RXCTRL_SIZE2MASK (0x1FFF << 16)
+#define DESC_RXCTRL_SIZE2SHFT (16)
+
+#else
+
+#define DESC_RXCTRL_RXINTDIS (1 << 31)
+#define DESC_RXCTRL_RXRINGEND (1 << 25)
+#define DESC_RXCTRL_RXCHAIN (1 << 24)
+
+#define DESC_RXCTRL_SIZE1MASK (0x7FF << 0)
+#define DESC_RXCTRL_SIZE1SHFT (0)
+#define DESC_RXCTRL_SIZE2MASK (0x7FF << 11)
+#define DESC_RXCTRL_SIZE2SHFT (11)
+
+#endif
+
+struct dw_eth_dev {
+ u32 address;
+ u32 speed;
+ u32 duplex;
+ u32 tx_currdescnum;
+ u32 rx_currdescnum;
+ u32 padding;
+
+ struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
+ struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
+
+ char txbuffs[TX_TOTAL_BUFSIZE];
+ char rxbuffs[RX_TOTAL_BUFSIZE];
+
+ struct eth_mac_regs *mac_regs_p;
+ struct eth_dma_regs *dma_regs_p;
+
+ struct eth_device *dev;
+} __attribute__ ((aligned(8)));
+
+/* Speed specific definitions */
+#define SPEED_10M 1
+#define SPEED_100M 2
+#define SPEED_1000M 3
+
+/* Duplex mode specific definitions */
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+#endif
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 137e41f..709f67a 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -117,12 +117,12 @@
/* DM9000 network board routine ---------------------------- */
-#define DM9000_outb(d,r) writeb(d, r)
-#define DM9000_outw(d,r) writew(d, r)
-#define DM9000_outl(d,r) writel(d, r)
-#define DM9000_inb(r) readb(r)
-#define DM9000_inw(r) readw(r)
-#define DM9000_inl(r) readl(r)
+#define DM9000_outb(d,r) writeb(d, (volatile u8 *)(r))
+#define DM9000_outw(d,r) writew(d, (volatile u16 *)(r))
+#define DM9000_outl(d,r) writel(d, (volatile u32 *)(r))
+#define DM9000_inb(r) readb((volatile u8 *)(r))
+#define DM9000_inw(r) readw((volatile u16 *)(r))
+#define DM9000_inl(r) readl((volatile u32 *)(r))
#ifdef CONFIG_DM9000_DEBUG
static void
diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c
deleted file mode 100644
index 932792e..0000000
--- a/drivers/net/kirkwood_egiga.c
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2003
- * Ingo Assmus <ingo.assmus@keymile.com>
- *
- * based on - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <net.h>
-#include <malloc.h>
-#include <miiphy.h>
-#include <asm/errno.h>
-#include <asm/types.h>
-#include <asm/byteorder.h>
-#include <asm/arch/kirkwood.h>
-#include "kirkwood_egiga.h"
-
-#define KIRKWOOD_PHY_ADR_REQUEST 0xee
-#define KWGBE_SMI_REG (((struct kwgbe_registers *)KW_EGIGA0_BASE)->smi)
-
-/*
- * smi_reg_read - miiphy_read callback function.
- *
- * Returns 16bit phy register value, or 0xffff on error
- */
-static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
-{
- struct eth_device *dev = eth_get_dev_by_name(devname);
- struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
- struct kwgbe_registers *regs = dkwgbe->regs;
- u32 smi_reg;
- u32 timeout;
-
- /* Phyadr read request */
- if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST &&
- reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) {
- /* */
- *data = (u16) (KWGBEREG_RD(regs->phyadr) & PHYADR_MASK);
- return 0;
- }
- /* check parameters */
- if (phy_adr > PHYADR_MASK) {
- printf("Err..(%s) Invalid PHY address %d\n",
- __FUNCTION__, phy_adr);
- return -EFAULT;
- }
- if (reg_ofs > PHYREG_MASK) {
- printf("Err..(%s) Invalid register offset %d\n",
- __FUNCTION__, reg_ofs);
- return -EFAULT;
- }
-
- timeout = KWGBE_PHY_SMI_TIMEOUT;
- /* wait till the SMI is not busy */
- do {
- /* read smi register */
- smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
- if (timeout-- == 0) {
- printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
- return -EFAULT;
- }
- } while (smi_reg & KWGBE_PHY_SMI_BUSY_MASK);
-
- /* fill the phy address and regiser offset and read opcode */
- smi_reg = (phy_adr << KWGBE_PHY_SMI_DEV_ADDR_OFFS)
- | (reg_ofs << KWGBE_SMI_REG_ADDR_OFFS)
- | KWGBE_PHY_SMI_OPCODE_READ;
-
- /* write the smi register */
- KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);
-
- /*wait till read value is ready */
- timeout = KWGBE_PHY_SMI_TIMEOUT;
-
- do {
- /* read smi register */
- smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
- if (timeout-- == 0) {
- printf("Err..(%s) SMI read ready timeout\n",
- __FUNCTION__);
- return -EFAULT;
- }
- } while (!(smi_reg & KWGBE_PHY_SMI_READ_VALID_MASK));
-
- /* Wait for the data to update in the SMI register */
- for (timeout = 0; timeout < KWGBE_PHY_SMI_TIMEOUT; timeout++) ;
-
- *data = (u16) (KWGBEREG_RD(KWGBE_SMI_REG) & KWGBE_PHY_SMI_DATA_MASK);
-
- debug("%s:(adr %d, off %d) value= %04x\n", __FUNCTION__, phy_adr,
- reg_ofs, *data);
-
- return 0;
-}
-
-/*
- * smi_reg_write - imiiphy_write callback function.
- *
- * Returns 0 if write succeed, -EINVAL on bad parameters
- * -ETIME on timeout
- */
-static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
-{
- struct eth_device *dev = eth_get_dev_by_name(devname);
- struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
- struct kwgbe_registers *regs = dkwgbe->regs;
- u32 smi_reg;
- u32 timeout;
-
- /* Phyadr write request*/
- if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST &&
- reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) {
- KWGBEREG_WR(regs->phyadr, data);
- return 0;
- }
-
- /* check parameters */
- if (phy_adr > PHYADR_MASK) {
- printf("Err..(%s) Invalid phy address\n", __FUNCTION__);
- return -EINVAL;
- }
- if (reg_ofs > PHYREG_MASK) {
- printf("Err..(%s) Invalid register offset\n", __FUNCTION__);
- return -EINVAL;
- }
-
- /* wait till the SMI is not busy */
- timeout = KWGBE_PHY_SMI_TIMEOUT;
- do {
- /* read smi register */
- smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
- if (timeout-- == 0) {
- printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
- return -ETIME;
- }
- } while (smi_reg & KWGBE_PHY_SMI_BUSY_MASK);
-
- /* fill the phy addr and reg offset and write opcode and data */
- smi_reg = (data << KWGBE_PHY_SMI_DATA_OFFS);
- smi_reg |= (phy_adr << KWGBE_PHY_SMI_DEV_ADDR_OFFS)
- | (reg_ofs << KWGBE_SMI_REG_ADDR_OFFS);
- smi_reg &= ~KWGBE_PHY_SMI_OPCODE_READ;
-
- /* write the smi register */
- KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);
-
- return 0;
-}
-
-/* Stop and checks all queues */
-static void stop_queue(u32 * qreg)
-{
- u32 reg_data;
-
- reg_data = readl(qreg);
-
- if (reg_data & 0xFF) {
- /* Issue stop command for active channels only */
- writel((reg_data << 8), qreg);
-
- /* Wait for all queue activity to terminate. */
- do {
- /*
- * Check port cause register that all queues
- * are stopped
- */
- reg_data = readl(qreg);
- }
- while (reg_data & 0xFF);
- }
-}
-
-/*
- * set_access_control - Config address decode parameters for Ethernet unit
- *
- * This function configures the address decode parameters for the Gigabit
- * Ethernet Controller according the given parameters struct.
- *
- * @regs Register struct pointer.
- * @param Address decode parameter struct.
- */
-static void set_access_control(struct kwgbe_registers *regs,
- struct kwgbe_winparam *param)
-{
- u32 access_prot_reg;
-
- /* Set access control register */
- access_prot_reg = KWGBEREG_RD(regs->epap);
- /* clear window permission */
- access_prot_reg &= (~(3 << (param->win * 2)));
- access_prot_reg |= (param->access_ctrl << (param->win * 2));
- KWGBEREG_WR(regs->epap, access_prot_reg);
-
- /* Set window Size reg (SR) */
- KWGBEREG_WR(regs->barsz[param->win].size,
- (((param->size / 0x10000) - 1) << 16));
-
- /* Set window Base address reg (BA) */
- KWGBEREG_WR(regs->barsz[param->win].bar,
- (param->target | param->attrib | param->base_addr));
- /* High address remap reg (HARR) */
- if (param->win < 4)
- KWGBEREG_WR(regs->ha_remap[param->win], param->high_addr);
-
- /* Base address enable reg (BARER) */
- if (param->enable == 1)
- KWGBEREG_BITS_RESET(regs->bare, (1 << param->win));
- else
- KWGBEREG_BITS_SET(regs->bare, (1 << param->win));
-}
-
-static void set_dram_access(struct kwgbe_registers *regs)
-{
- struct kwgbe_winparam win_param;
- int i;
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- /* Set access parameters for DRAM bank i */
- win_param.win = i; /* Use Ethernet window i */
- /* Window target - DDR */
- win_param.target = KWGBE_TARGET_DRAM;
- /* Enable full access */
- win_param.access_ctrl = EWIN_ACCESS_FULL;
- win_param.high_addr = 0;
- /* Get bank base */
- win_param.base_addr = kw_sdram_bar(i);
- win_param.size = kw_sdram_bs(i); /* Get bank size */
- if (win_param.size == 0)
- win_param.enable = 0;
- else
- win_param.enable = 1; /* Enable the access */
-
- /* Enable DRAM bank */
- switch (i) {
- case 0:
- win_param.attrib = EBAR_DRAM_CS0;
- break;
- case 1:
- win_param.attrib = EBAR_DRAM_CS1;
- break;
- case 2:
- win_param.attrib = EBAR_DRAM_CS2;
- break;
- case 3:
- win_param.attrib = EBAR_DRAM_CS3;
- break;
- default:
- /* invalide bank, disable access */
- win_param.enable = 0;
- win_param.attrib = 0;
- break;
- }
- /* Set the access control for address window(EPAPR) RD/WR */
- set_access_control(regs, &win_param);
- }
-}
-
-/*
- * port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
- *
- * Go through all the DA filter tables (Unicast, Special Multicast & Other
- * Multicast) and set each entry to 0.
- */
-static void port_init_mac_tables(struct kwgbe_registers *regs)
-{
- int table_index;
-
- /* Clear DA filter unicast table (Ex_dFUT) */
- for (table_index = 0; table_index < 4; ++table_index)
- KWGBEREG_WR(regs->dfut[table_index], 0);
-
- for (table_index = 0; table_index < 64; ++table_index) {
- /* Clear DA filter special multicast table (Ex_dFSMT) */
- KWGBEREG_WR(regs->dfsmt[table_index], 0);
- /* Clear DA filter other multicast table (Ex_dFOMT) */
- KWGBEREG_WR(regs->dfomt[table_index], 0);
- }
-}
-
-/*
- * port_uc_addr - This function Set the port unicast address table
- *
- * This function locates the proper entry in the Unicast table for the
- * specified MAC nibble and sets its properties according to function
- * parameters.
- * This function add/removes MAC addresses from the port unicast address
- * table.
- *
- * @uc_nibble Unicast MAC Address last nibble.
- * @option 0 = Add, 1 = remove address.
- *
- * RETURN: 1 if output succeeded. 0 if option parameter is invalid.
- */
-static int port_uc_addr(struct kwgbe_registers *regs, u8 uc_nibble,
- int option)
-{
- u32 unicast_reg;
- u32 tbl_offset;
- u32 reg_offset;
-
- /* Locate the Unicast table entry */
- uc_nibble = (0xf & uc_nibble);
- /* Register offset from unicast table base */
- tbl_offset = (uc_nibble / 4);
- /* Entry offset within the above register */
- reg_offset = uc_nibble % 4;
-
- switch (option) {
- case REJECT_MAC_ADDR:
- /*
- * Clear accepts frame bit at specified unicast
- * DA table entry
- */
- unicast_reg = KWGBEREG_RD(regs->dfut[tbl_offset]);
- unicast_reg &= (0xFF << (8 * reg_offset));
- KWGBEREG_WR(regs->dfut[tbl_offset], unicast_reg);
- break;
- case ACCEPT_MAC_ADDR:
- /* Set accepts frame bit at unicast DA filter table entry */
- unicast_reg = KWGBEREG_RD(regs->dfut[tbl_offset]);
- unicast_reg &= (0xFF << (8 * reg_offset));
- unicast_reg |= ((0x01 | (RXUQ << 1)) << (8 * reg_offset));
- KWGBEREG_WR(regs->dfut[tbl_offset], unicast_reg);
- break;
- default:
- return 0;
- }
- return 1;
-}
-
-/*
- * port_uc_addr_set - This function Set the port Unicast address.
- */
-static void port_uc_addr_set(struct kwgbe_registers *regs, u8 * p_addr)
-{
- u32 mac_h;
- u32 mac_l;
-
- mac_l = (p_addr[4] << 8) | (p_addr[5]);
- mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
- (p_addr[3] << 0);
-
- KWGBEREG_WR(regs->macal, mac_l);
- KWGBEREG_WR(regs->macah, mac_h);
-
- /* Accept frames of this address */
- port_uc_addr(regs, p_addr[5], ACCEPT_MAC_ADDR);
-}
-
-/*
- * kwgbe_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
- */
-static void kwgbe_init_rx_desc_ring(struct kwgbe_device *dkwgbe)
-{
- struct kwgbe_rxdesc *p_rx_desc;
- int i;
-
- /* initialize the Rx descriptors ring */
- p_rx_desc = dkwgbe->p_rxdesc;
- for (i = 0; i < RINGSZ; i++) {
- p_rx_desc->cmd_sts =
- KWGBE_BUFFER_OWNED_BY_DMA | KWGBE_RX_EN_INTERRUPT;
- p_rx_desc->buf_size = PKTSIZE_ALIGN;
- p_rx_desc->byte_cnt = 0;
- p_rx_desc->buf_ptr = dkwgbe->p_rxbuf + i * PKTSIZE_ALIGN;
- if (i == (RINGSZ - 1))
- p_rx_desc->nxtdesc_p = dkwgbe->p_rxdesc;
- else {
- p_rx_desc->nxtdesc_p = (struct kwgbe_rxdesc *)
- ((u32) p_rx_desc + KW_RXQ_DESC_ALIGNED_SIZE);
- p_rx_desc = p_rx_desc->nxtdesc_p;
- }
- }
- dkwgbe->p_rxdesc_curr = dkwgbe->p_rxdesc;
-}
-
-static int kwgbe_init(struct eth_device *dev)
-{
- struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
- struct kwgbe_registers *regs = dkwgbe->regs;
-#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \
- && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
- int i;
-#endif
- /* setup RX rings */
- kwgbe_init_rx_desc_ring(dkwgbe);
-
- /* Clear the ethernet port interrupts */
- KWGBEREG_WR(regs->ic, 0);
- KWGBEREG_WR(regs->ice, 0);
- /* Unmask RX buffer and TX end interrupt */
- KWGBEREG_WR(regs->pim, INT_CAUSE_UNMASK_ALL);
- /* Unmask phy and link status changes interrupts */
- KWGBEREG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT);
-
- set_dram_access(regs);
- port_init_mac_tables(regs);
- port_uc_addr_set(regs, dkwgbe->dev.enetaddr);
-
- /* Assign port configuration and command. */
- KWGBEREG_WR(regs->pxc, PRT_CFG_VAL);
- KWGBEREG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE);
- KWGBEREG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE);
-
- /* Assign port SDMA configuration */
- KWGBEREG_WR(regs->sdc, PORT_SDMA_CFG_VALUE);
- KWGBEREG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL);
- KWGBEREG_WR(regs->tqx[0].tqxtbc, (QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL);
- /* Turn off the port/RXUQ bandwidth limitation */
- KWGBEREG_WR(regs->pmtu, 0);
-
- /* Set maximum receive buffer to 9700 bytes */
- KWGBEREG_WR(regs->psc0, KWGBE_MAX_RX_PACKET_9700BYTE
- | (KWGBEREG_RD(regs->psc0) & MRU_MASK));
-
- /* Enable port initially */
- KWGBEREG_BITS_SET(regs->psc0, KWGBE_SERIAL_PORT_EN);
-
- /*
- * Set ethernet MTU for leaky bucket mechanism to 0 - this will
- * disable the leaky bucket mechanism .
- */
- KWGBEREG_WR(regs->pmtu, 0);
-
- /* Assignment of Rx CRDB of given RXUQ */
- KWGBEREG_WR(regs->rxcdp[RXUQ], (u32) dkwgbe->p_rxdesc_curr);
- /* Enable port Rx. */
- KWGBEREG_WR(regs->rqc, (1 << RXUQ));
-
-#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \
- && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
- /* Wait up to 5s for the link status */
- for (i = 0; i < 5; i++) {
- u16 phyadr;
-
- miiphy_read(dev->name, KIRKWOOD_PHY_ADR_REQUEST,
- KIRKWOOD_PHY_ADR_REQUEST, &phyadr);
- /* Return if we get link up */
- if (miiphy_link(dev->name, phyadr))
- return 0;
- udelay(1000000);
- }
-
- printf("No link on %s\n", dev->name);
- return -1;
-#endif
- return 0;
-}
-
-static int kwgbe_halt(struct eth_device *dev)
-{
- struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
- struct kwgbe_registers *regs = dkwgbe->regs;
-
- /* Disable all gigE address decoder */
- KWGBEREG_WR(regs->bare, 0x3f);
-
- stop_queue(®s->tqc);
- stop_queue(®s->rqc);
-
- /* Disable port */
- KWGBEREG_BITS_RESET(regs->psc0, KWGBE_SERIAL_PORT_EN);
- /* Set port is not reset */
- KWGBEREG_BITS_RESET(regs->psc1, 1 << 4);
-#ifdef CONFIG_SYS_MII_MODE
- /* Set MMI interface up */
- KWGBEREG_BITS_RESET(regs->psc1, 1 << 3);
-#endif
- /* Disable & mask ethernet port interrupts */
- KWGBEREG_WR(regs->ic, 0);
- KWGBEREG_WR(regs->ice, 0);
- KWGBEREG_WR(regs->pim, 0);
- KWGBEREG_WR(regs->peim, 0);
-
- return 0;
-}
-
-static int kwgbe_write_hwaddr(struct eth_device *dev)
-{
- struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
- struct kwgbe_registers *regs = dkwgbe->regs;
-
- /* Programs net device MAC address after initialization */
- port_uc_addr_set(regs, dkwgbe->dev.enetaddr);
- return 0;
-}
-
-static int kwgbe_send(struct eth_device *dev, volatile void *dataptr,
- int datasize)
-{
- struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
- struct kwgbe_registers *regs = dkwgbe->regs;
- struct kwgbe_txdesc *p_txdesc = dkwgbe->p_txdesc;
- void *p = (void *)dataptr;
- u32 cmd_sts;
-
- /* Copy buffer if it's misaligned */
- if ((u32) dataptr & 0x07) {
- if (datasize > PKTSIZE_ALIGN) {
- printf("Non-aligned data too large (%d)\n",
- datasize);
- return -1;
- }
-
- memcpy(dkwgbe->p_aligned_txbuf, p, datasize);
- p = dkwgbe->p_aligned_txbuf;
- }
-
- p_txdesc->cmd_sts = KWGBE_ZERO_PADDING | KWGBE_GEN_CRC;
- p_txdesc->cmd_sts |= KWGBE_TX_FIRST_DESC | KWGBE_TX_LAST_DESC;
- p_txdesc->cmd_sts |= KWGBE_BUFFER_OWNED_BY_DMA;
- p_txdesc->cmd_sts |= KWGBE_TX_EN_INTERRUPT;
- p_txdesc->buf_ptr = (u8 *) p;
- p_txdesc->byte_cnt = datasize;
-
- /* Apply send command using zeroth TXUQ */
- KWGBEREG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc);
- KWGBEREG_WR(regs->tqc, (1 << TXUQ));
-
- /*
- * wait for packet xmit completion
- */
- cmd_sts = readl(&p_txdesc->cmd_sts);
- while (cmd_sts & KWGBE_BUFFER_OWNED_BY_DMA) {
- /* return fail if error is detected */
- if ((cmd_sts & (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME)) ==
- (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME) &&
- cmd_sts & (KWGBE_UR_ERROR | KWGBE_RL_ERROR)) {
- printf("Err..(%s) in xmit packet\n", __FUNCTION__);
- return -1;
- }
- cmd_sts = readl(&p_txdesc->cmd_sts);
- };
- return 0;
-}
-
-static int kwgbe_recv(struct eth_device *dev)
-{
- struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
- struct kwgbe_rxdesc *p_rxdesc_curr = dkwgbe->p_rxdesc_curr;
- u32 cmd_sts;
- u32 timeout = 0;
-
- /* wait untill rx packet available or timeout */
- do {
- if (timeout < KWGBE_PHY_SMI_TIMEOUT)
- timeout++;
- else {
- debug("%s time out...\n", __FUNCTION__);
- return -1;
- }
- } while (readl(&p_rxdesc_curr->cmd_sts) & KWGBE_BUFFER_OWNED_BY_DMA);
-
- if (p_rxdesc_curr->byte_cnt != 0) {
- debug("%s: Received %d byte Packet @ 0x%x (cmd_sts= %08x)\n",
- __FUNCTION__, (u32) p_rxdesc_curr->byte_cnt,
- (u32) p_rxdesc_curr->buf_ptr,
- (u32) p_rxdesc_curr->cmd_sts);
- }
-
- /*
- * In case received a packet without first/last bits on
- * OR the error summary bit is on,
- * the packets needs to be dropeed.
- */
- cmd_sts = readl(&p_rxdesc_curr->cmd_sts);
-
- if ((cmd_sts &
- (KWGBE_RX_FIRST_DESC | KWGBE_RX_LAST_DESC))
- != (KWGBE_RX_FIRST_DESC | KWGBE_RX_LAST_DESC)) {
-
- printf("Err..(%s) Dropping packet spread on"
- " multiple descriptors\n", __FUNCTION__);
-
- } else if (cmd_sts & KWGBE_ERROR_SUMMARY) {
-
- printf("Err..(%s) Dropping packet with errors\n",
- __FUNCTION__);
-
- } else {
- /* !!! call higher layer processing */
- debug("%s: Sending Received packet to"
- " upper layer (NetReceive)\n", __FUNCTION__);
-
- /* let the upper layer handle the packet */
- NetReceive((p_rxdesc_curr->buf_ptr + RX_BUF_OFFSET),
- (int)(p_rxdesc_curr->byte_cnt - RX_BUF_OFFSET));
- }
- /*
- * free these descriptors and point next in the ring
- */
- p_rxdesc_curr->cmd_sts =
- KWGBE_BUFFER_OWNED_BY_DMA | KWGBE_RX_EN_INTERRUPT;
- p_rxdesc_curr->buf_size = PKTSIZE_ALIGN;
- p_rxdesc_curr->byte_cnt = 0;
-
- writel((unsigned)p_rxdesc_curr->nxtdesc_p, (u32) &dkwgbe->p_rxdesc_curr);
-
- return 0;
-}
-
-int kirkwood_egiga_initialize(bd_t * bis)
-{
- struct kwgbe_device *dkwgbe;
- struct eth_device *dev;
- int devnum;
- char *s;
- u8 used_ports[MAX_KWGBE_DEVS] = CONFIG_KIRKWOOD_EGIGA_PORTS;
-
- for (devnum = 0; devnum < MAX_KWGBE_DEVS; devnum++) {
- /*skip if port is configured not to use */
- if (used_ports[devnum] == 0)
- continue;
-
- if (!(dkwgbe = malloc(sizeof(struct kwgbe_device))))
- goto error1;
-
- memset(dkwgbe, 0, sizeof(struct kwgbe_device));
-
- if (!(dkwgbe->p_rxdesc =
- (struct kwgbe_rxdesc *)memalign(PKTALIGN,
- KW_RXQ_DESC_ALIGNED_SIZE
- * RINGSZ + 1)))
- goto error2;
-
- if (!(dkwgbe->p_rxbuf = (u8 *) memalign(PKTALIGN, RINGSZ
- * PKTSIZE_ALIGN + 1)))
- goto error3;
-
- if (!(dkwgbe->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN)))
- goto error4;
-
- if (!(dkwgbe->p_txdesc = (struct kwgbe_txdesc *)
- memalign(PKTALIGN, sizeof(struct kwgbe_txdesc) + 1))) {
- free(dkwgbe->p_aligned_txbuf);
- error4:
- free(dkwgbe->p_rxbuf);
- error3:
- free(dkwgbe->p_rxdesc);
- error2:
- free(dkwgbe);
- error1:
- printf("Err.. %s Failed to allocate memory\n",
- __FUNCTION__);
- return -1;
- }
-
- dev = &dkwgbe->dev;
-
- /* must be less than NAMESIZE (16) */
- sprintf(dev->name, "egiga%d", devnum);
-
- /* Extract the MAC address from the environment */
- switch (devnum) {
- case 0:
- dkwgbe->regs = (void *)KW_EGIGA0_BASE;
- s = "ethaddr";
- break;
- case 1:
- dkwgbe->regs = (void *)KW_EGIGA1_BASE;
- s = "eth1addr";
- break;
- default: /* this should never happen */
- printf("Err..(%s) Invalid device number %d\n",
- __FUNCTION__, devnum);
- return -1;
- }
-
- while (!eth_getenv_enetaddr(s, dev->enetaddr)) {
- /* Generate Random Private MAC addr if not set */
- dev->enetaddr[0] = 0x02;
- dev->enetaddr[1] = 0x50;
- dev->enetaddr[2] = 0x43;
- dev->enetaddr[3] = get_random_hex();
- dev->enetaddr[4] = get_random_hex();
- dev->enetaddr[5] = get_random_hex();
- eth_setenv_enetaddr(s, dev->enetaddr);
- }
-
- dev->init = (void *)kwgbe_init;
- dev->halt = (void *)kwgbe_halt;
- dev->send = (void *)kwgbe_send;
- dev->recv = (void *)kwgbe_recv;
- dev->write_hwaddr = (void *)kwgbe_write_hwaddr;
-
- eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register(dev->name, smi_reg_read, smi_reg_write);
- /* Set phy address of the port */
- miiphy_write(dev->name, KIRKWOOD_PHY_ADR_REQUEST,
- KIRKWOOD_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum);
-#endif
- }
- return 0;
-}
diff --git a/drivers/net/kirkwood_egiga.h b/drivers/net/kirkwood_egiga.h
deleted file mode 100644
index 30c773c..0000000
--- a/drivers/net/kirkwood_egiga.h
+++ /dev/null
@@ -1,505 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * based on - Driver for MV64360X ethernet ports
- * Copyright (C) 2002 rabeeh@galileo.co.il
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#ifndef __EGIGA_H__
-#define __EGIGA_H__
-
-#define MAX_KWGBE_DEVS 2 /*controller has two ports */
-
-/* PHY_BASE_ADR is board specific and can be configured */
-#if defined (CONFIG_PHY_BASE_ADR)
-#define PHY_BASE_ADR CONFIG_PHY_BASE_ADR
-#else
-#define PHY_BASE_ADR 0x08 /* default phy base addr */
-#endif
-
-/* Constants */
-#define INT_CAUSE_UNMASK_ALL 0x0007ffff
-#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff
-#define MRU_MASK 0xfff1ffff
-#define PHYADR_MASK 0x0000001f
-#define PHYREG_MASK 0x0000001f
-#define QTKNBKT_DEF_VAL 0x3fffffff
-#define QMTBS_DEF_VAL 0x000003ff
-#define QTKNRT_DEF_VAL 0x0000fcff
-#define RXUQ 0 /* Used Rx queue */
-#define TXUQ 0 /* Used Rx queue */
-
-#define to_dkwgbe(_kd) container_of(_kd, struct kwgbe_device, dev)
-#define KWGBEREG_WR(adr, val) writel(val, &adr)
-#define KWGBEREG_RD(adr) readl(&adr)
-#define KWGBEREG_BITS_RESET(adr, val) writel(readl(&adr) & ~(val), &adr)
-#define KWGBEREG_BITS_SET(adr, val) writel(readl(&adr) | val, &adr)
-
-/* Default port configuration value */
-#define PRT_CFG_VAL ( \
- KWGBE_UCAST_MOD_NRML | \
- KWGBE_DFLT_RXQ(RXUQ) | \
- KWGBE_DFLT_RX_ARPQ(RXUQ) | \
- KWGBE_RX_BC_IF_NOT_IP_OR_ARP | \
- KWGBE_RX_BC_IF_IP | \
- KWGBE_RX_BC_IF_ARP | \
- KWGBE_CPTR_TCP_FRMS_DIS | \
- KWGBE_CPTR_UDP_FRMS_DIS | \
- KWGBE_DFLT_RX_TCPQ(RXUQ) | \
- KWGBE_DFLT_RX_UDPQ(RXUQ) | \
- KWGBE_DFLT_RX_BPDUQ(RXUQ))
-
-/* Default port extend configuration value */
-#define PORT_CFG_EXTEND_VALUE \
- KWGBE_SPAN_BPDU_PACKETS_AS_NORMAL | \
- KWGBE_PARTITION_DIS | \
- KWGBE_TX_CRC_GENERATION_EN
-
-#define GT_KWGBE_IPG_INT_RX(value) ((value & 0x3fff) << 8)
-
-/* Default sdma control value */
-#define PORT_SDMA_CFG_VALUE ( \
- KWGBE_RX_BURST_SIZE_16_64BIT | \
- KWGBE_BLM_RX_NO_SWAP | \
- KWGBE_BLM_TX_NO_SWAP | \
- GT_KWGBE_IPG_INT_RX(RXUQ) | \
- KWGBE_TX_BURST_SIZE_16_64BIT)
-
-/* Default port serial control value */
-#define PORT_SERIAL_CONTROL_VALUE ( \
- KWGBE_FORCE_LINK_PASS | \
- KWGBE_DIS_AUTO_NEG_FOR_DUPLX | \
- KWGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
- KWGBE_ADV_NO_FLOW_CTRL | \
- KWGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
- KWGBE_FORCE_BP_MODE_NO_JAM | \
- (1 << 9) /* Reserved bit has to be 1 */ | \
- KWGBE_DO_NOT_FORCE_LINK_FAIL | \
- KWGBE_EN_AUTO_NEG_SPEED_GMII | \
- KWGBE_DTE_ADV_0 | \
- KWGBE_MIIPHY_MAC_MODE | \
- KWGBE_AUTO_NEG_NO_CHANGE | \
- KWGBE_MAX_RX_PACKET_1552BYTE | \
- KWGBE_CLR_EXT_LOOPBACK | \
- KWGBE_SET_FULL_DUPLEX_MODE | \
- KWGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX)
-
-/* Tx WRR confoguration macros */
-#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */
-#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_FFFF /* PMTBS reg (default) */
-#define PORT_TOKEN_RATE 1023 /* PTTBRC reg (default) */
-/* MAC accepet/reject macros */
-#define ACCEPT_MAC_ADDR 0
-#define REJECT_MAC_ADDR 1
-/* Size of a Tx/Rx descriptor used in chain list data structure */
-#define KW_RXQ_DESC_ALIGNED_SIZE \
- (((sizeof(struct kwgbe_rxdesc) / PKTALIGN) + 1) * PKTALIGN)
-/* Buffer offset from buffer pointer */
-#define RX_BUF_OFFSET 0x2
-
-/* Port serial status reg (PSR) */
-#define KWGBE_INTERFACE_GMII_MII 0
-#define KWGBE_INTERFACE_PCM 1
-#define KWGBE_LINK_IS_DOWN 0
-#define KWGBE_LINK_IS_UP (1 << 1)
-#define KWGBE_PORT_AT_HALF_DUPLEX 0
-#define KWGBE_PORT_AT_FULL_DUPLEX (1 << 2)
-#define KWGBE_RX_FLOW_CTRL_DISD 0
-#define KWGBE_RX_FLOW_CTRL_ENBALED (1 << 3)
-#define KWGBE_GMII_SPEED_100_10 0
-#define KWGBE_GMII_SPEED_1000 (1 << 4)
-#define KWGBE_MII_SPEED_10 0
-#define KWGBE_MII_SPEED_100 (1 << 5)
-#define KWGBE_NO_TX 0
-#define KWGBE_TX_IN_PROGRESS (1 << 7)
-#define KWGBE_BYPASS_NO_ACTIVE 0
-#define KWGBE_BYPASS_ACTIVE (1 << 8)
-#define KWGBE_PORT_NOT_AT_PARTN_STT 0
-#define KWGBE_PORT_AT_PARTN_STT (1 << 9)
-#define KWGBE_PORT_TX_FIFO_NOT_EMPTY 0
-#define KWGBE_PORT_TX_FIFO_EMPTY (1 << 10)
-
-/* These macros describes the Port configuration reg (Px_cR) bits */
-#define KWGBE_UCAST_MOD_NRML 0
-#define KWGBE_UNICAST_PROMISCUOUS_MODE 1
-#define KWGBE_DFLT_RXQ(_x) (_x << 1)
-#define KWGBE_DFLT_RX_ARPQ(_x) (_x << 4)
-#define KWGBE_RX_BC_IF_NOT_IP_OR_ARP 0
-#define KWGBE_REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7)
-#define KWGBE_RX_BC_IF_IP 0
-#define KWGBE_REJECT_BC_IF_IP (1 << 8)
-#define KWGBE_RX_BC_IF_ARP 0
-#define KWGBE_REJECT_BC_IF_ARP (1 << 9)
-#define KWGBE_TX_AM_NO_UPDATE_ERR_SMRY (1 << 12)
-#define KWGBE_CPTR_TCP_FRMS_DIS 0
-#define KWGBE_CPTR_TCP_FRMS_EN (1 << 14)
-#define KWGBE_CPTR_UDP_FRMS_DIS 0
-#define KWGBE_CPTR_UDP_FRMS_EN (1 << 15)
-#define KWGBE_DFLT_RX_TCPQ(_x) (_x << 16)
-#define KWGBE_DFLT_RX_UDPQ(_x) (_x << 19)
-#define KWGBE_DFLT_RX_BPDUQ(_x) (_x << 22)
-#define KWGBE_DFLT_RX_TCP_CHKSUM_MODE (1 << 25)
-
-/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
-#define KWGBE_CLASSIFY_EN 1
-#define KWGBE_SPAN_BPDU_PACKETS_AS_NORMAL 0
-#define KWGBE_SPAN_BPDU_PACKETS_TO_RX_Q7 (1 << 1)
-#define KWGBE_PARTITION_DIS 0
-#define KWGBE_PARTITION_EN (1 << 2)
-#define KWGBE_TX_CRC_GENERATION_EN 0
-#define KWGBE_TX_CRC_GENERATION_DIS (1 << 3)
-
-/* These macros describes the Port Sdma configuration reg (SDCR) bits */
-#define KWGBE_RIFB 1
-#define KWGBE_RX_BURST_SIZE_1_64BIT 0
-#define KWGBE_RX_BURST_SIZE_2_64BIT (1 << 1)
-#define KWGBE_RX_BURST_SIZE_4_64BIT (1 << 2)
-#define KWGBE_RX_BURST_SIZE_8_64BIT ((1 << 2) | (1 << 1))
-#define KWGBE_RX_BURST_SIZE_16_64BIT (1 << 3)
-#define KWGBE_BLM_RX_NO_SWAP (1 << 4)
-#define KWGBE_BLM_RX_BYTE_SWAP 0
-#define KWGBE_BLM_TX_NO_SWAP (1 << 5)
-#define KWGBE_BLM_TX_BYTE_SWAP 0
-#define KWGBE_DESCRIPTORS_BYTE_SWAP (1 << 6)
-#define KWGBE_DESCRIPTORS_NO_SWAP 0
-#define KWGBE_TX_BURST_SIZE_1_64BIT 0
-#define KWGBE_TX_BURST_SIZE_2_64BIT (1 << 22)
-#define KWGBE_TX_BURST_SIZE_4_64BIT (1 << 23)
-#define KWGBE_TX_BURST_SIZE_8_64BIT ((1 << 23) | (1 << 22))
-#define KWGBE_TX_BURST_SIZE_16_64BIT (1 << 24)
-
-/* These macros describes the Port serial control reg (PSCR) bits */
-#define KWGBE_SERIAL_PORT_DIS 0
-#define KWGBE_SERIAL_PORT_EN 1
-#define KWGBE_FORCE_LINK_PASS (1 << 1)
-#define KWGBE_DO_NOT_FORCE_LINK_PASS 0
-#define KWGBE_EN_AUTO_NEG_FOR_DUPLX 0
-#define KWGBE_DIS_AUTO_NEG_FOR_DUPLX (1 << 2)
-#define KWGBE_EN_AUTO_NEG_FOR_FLOW_CTRL 0
-#define KWGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL (1 << 3)
-#define KWGBE_ADV_NO_FLOW_CTRL 0
-#define KWGBE_ADV_SYMMETRIC_FLOW_CTRL (1 << 4)
-#define KWGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0
-#define KWGBE_FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5)
-#define KWGBE_FORCE_BP_MODE_NO_JAM 0
-#define KWGBE_FORCE_BP_MODE_JAM_TX (1 << 7)
-#define KWGBE_FORCE_BP_MODE_JAM_TX_ON_RX_ERR (1 << 8)
-#define KWGBE_FORCE_LINK_FAIL 0
-#define KWGBE_DO_NOT_FORCE_LINK_FAIL (1 << 10)
-#define KWGBE_DIS_AUTO_NEG_SPEED_GMII (1 << 13)
-#define KWGBE_EN_AUTO_NEG_SPEED_GMII 0
-#define KWGBE_DTE_ADV_0 0
-#define KWGBE_DTE_ADV_1 (1 << 14)
-#define KWGBE_MIIPHY_MAC_MODE 0
-#define KWGBE_MIIPHY_PHY_MODE (1 << 15)
-#define KWGBE_AUTO_NEG_NO_CHANGE 0
-#define KWGBE_RESTART_AUTO_NEG (1 << 16)
-#define KWGBE_MAX_RX_PACKET_1518BYTE 0
-#define KWGBE_MAX_RX_PACKET_1522BYTE (1 << 17)
-#define KWGBE_MAX_RX_PACKET_1552BYTE (1 << 18)
-#define KWGBE_MAX_RX_PACKET_9022BYTE ((1 << 18) | (1 << 17))
-#define KWGBE_MAX_RX_PACKET_9192BYTE (1 << 19)
-#define KWGBE_MAX_RX_PACKET_9700BYTE ((1 << 19) | (1 << 17))
-#define KWGBE_SET_EXT_LOOPBACK (1 << 20)
-#define KWGBE_CLR_EXT_LOOPBACK 0
-#define KWGBE_SET_FULL_DUPLEX_MODE (1 << 21)
-#define KWGBE_SET_HALF_DUPLEX_MODE 0
-#define KWGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22)
-#define KWGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0
-#define KWGBE_SET_GMII_SPEED_TO_10_100 0
-#define KWGBE_SET_GMII_SPEED_TO_1000 (1 << 23)
-#define KWGBE_SET_MII_SPEED_TO_10 0
-#define KWGBE_SET_MII_SPEED_TO_100 (1 << 24)
-
-/* SMI register fields */
-#define KWGBE_PHY_SMI_TIMEOUT 10000
-#define KWGBE_PHY_SMI_DATA_OFFS 0 /* Data */
-#define KWGBE_PHY_SMI_DATA_MASK (0xffff << KWGBE_PHY_SMI_DATA_OFFS)
-#define KWGBE_PHY_SMI_DEV_ADDR_OFFS 16 /* PHY device address */
-#define KWGBE_PHY_SMI_DEV_ADDR_MASK (PHYADR_MASK << KWGBE_PHY_SMI_DEV_ADDR_OFFS)
-#define KWGBE_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr */
-#define KWGBE_SMI_REG_ADDR_MASK (PHYADR_MASK << KWGBE_SMI_REG_ADDR_OFFS)
-#define KWGBE_PHY_SMI_OPCODE_OFFS 26 /* Write/Read opcode */
-#define KWGBE_PHY_SMI_OPCODE_MASK (3 << KWGBE_PHY_SMI_OPCODE_OFFS)
-#define KWGBE_PHY_SMI_OPCODE_WRITE (0 << KWGBE_PHY_SMI_OPCODE_OFFS)
-#define KWGBE_PHY_SMI_OPCODE_READ (1 << KWGBE_PHY_SMI_OPCODE_OFFS)
-#define KWGBE_PHY_SMI_READ_VALID_MASK (1 << 27) /* Read Valid */
-#define KWGBE_PHY_SMI_BUSY_MASK (1 << 28) /* Busy */
-
-/* SDMA command status fields macros */
-/* Tx & Rx descriptors status */
-#define KWGBE_ERROR_SUMMARY 1
-/* Tx & Rx descriptors command */
-#define KWGBE_BUFFER_OWNED_BY_DMA (1 << 31)
-/* Tx descriptors status */
-#define KWGBE_LC_ERROR 0
-#define KWGBE_UR_ERROR (1 << 1)
-#define KWGBE_RL_ERROR (1 << 2)
-#define KWGBE_LLC_SNAP_FORMAT (1 << 9)
-#define KWGBE_TX_LAST_FRAME (1 << 20)
-
-/* Rx descriptors status */
-#define KWGBE_CRC_ERROR 0
-#define KWGBE_OVERRUN_ERROR (1 << 1)
-#define KWGBE_MAX_FRAME_LENGTH_ERROR (1 << 2)
-#define KWGBE_RESOURCE_ERROR ((1 << 2) | (1 << 1))
-#define KWGBE_VLAN_TAGGED (1 << 19)
-#define KWGBE_BPDU_FRAME (1 << 20)
-#define KWGBE_TCP_FRAME_OVER_IP_V_4 0
-#define KWGBE_UDP_FRAME_OVER_IP_V_4 (1 << 21)
-#define KWGBE_OTHER_FRAME_TYPE (1 << 22)
-#define KWGBE_LAYER_2_IS_KWGBE_V_2 (1 << 23)
-#define KWGBE_FRAME_TYPE_IP_V_4 (1 << 24)
-#define KWGBE_FRAME_HEADER_OK (1 << 25)
-#define KWGBE_RX_LAST_DESC (1 << 26)
-#define KWGBE_RX_FIRST_DESC (1 << 27)
-#define KWGBE_UNKNOWN_DESTINATION_ADDR (1 << 28)
-#define KWGBE_RX_EN_INTERRUPT (1 << 29)
-#define KWGBE_LAYER_4_CHECKSUM_OK (1 << 30)
-
-/* Rx descriptors byte count */
-#define KWGBE_FRAME_FRAGMENTED (1 << 2)
-
-/* Tx descriptors command */
-#define KWGBE_LAYER_4_CHECKSUM_FIRST_DESC (1 << 10)
-#define KWGBE_FRAME_SET_TO_VLAN (1 << 15)
-#define KWGBE_TCP_FRAME 0
-#define KWGBE_UDP_FRAME (1 << 16)
-#define KWGBE_GEN_TCP_UDP_CHECKSUM (1 << 17)
-#define KWGBE_GEN_IP_V_4_CHECKSUM (1 << 18)
-#define KWGBE_ZERO_PADDING (1 << 19)
-#define KWGBE_TX_LAST_DESC (1 << 20)
-#define KWGBE_TX_FIRST_DESC (1 << 21)
-#define KWGBE_GEN_CRC (1 << 22)
-#define KWGBE_TX_EN_INTERRUPT (1 << 23)
-#define KWGBE_AUTO_MODE (1 << 30)
-
-/* Address decode parameters */
-/* Ethernet Base Address Register bits */
-#define EBAR_TARGET_DRAM 0x00000000
-#define EBAR_TARGET_DEVICE 0x00000001
-#define EBAR_TARGET_CBS 0x00000002
-#define EBAR_TARGET_PCI0 0x00000003
-#define EBAR_TARGET_PCI1 0x00000004
-#define EBAR_TARGET_CUNIT 0x00000005
-#define EBAR_TARGET_AUNIT 0x00000006
-#define EBAR_TARGET_GUNIT 0x00000007
-
-/* Window attrib */
-#define EBAR_DRAM_CS0 0x00000E00
-#define EBAR_DRAM_CS1 0x00000D00
-#define EBAR_DRAM_CS2 0x00000B00
-#define EBAR_DRAM_CS3 0x00000700
-
-/* DRAM Target interface */
-#define EBAR_DRAM_NO_CACHE_COHERENCY 0x00000000
-#define EBAR_DRAM_CACHE_COHERENCY_WT 0x00001000
-#define EBAR_DRAM_CACHE_COHERENCY_WB 0x00002000
-
-/* Device Bus Target interface */
-#define EBAR_DEVICE_DEVCS0 0x00001E00
-#define EBAR_DEVICE_DEVCS1 0x00001D00
-#define EBAR_DEVICE_DEVCS2 0x00001B00
-#define EBAR_DEVICE_DEVCS3 0x00001700
-#define EBAR_DEVICE_BOOTCS3 0x00000F00
-
-/* PCI Target interface */
-#define EBAR_PCI_BYTE_SWAP 0x00000000
-#define EBAR_PCI_NO_SWAP 0x00000100
-#define EBAR_PCI_BYTE_WORD_SWAP 0x00000200
-#define EBAR_PCI_WORD_SWAP 0x00000300
-#define EBAR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000
-#define EBAR_PCI_NO_SNOOP_ASSERT 0x00000400
-#define EBAR_PCI_IO_SPACE 0x00000000
-#define EBAR_PCI_MEMORY_SPACE 0x00000800
-#define EBAR_PCI_REQ64_FORCE 0x00000000
-#define EBAR_PCI_REQ64_SIZE 0x00001000
-
-/* Window access control */
-#define EWIN_ACCESS_NOT_ALLOWED 0
-#define EWIN_ACCESS_READ_ONLY 1
-#define EWIN_ACCESS_FULL ((1 << 1) | 1)
-
-/* structures represents Controller registers */
-struct kwgbe_barsz {
- u32 bar;
- u32 size;
-};
-
-struct kwgbe_rxcdp {
- struct kwgbe_rxdesc *rxcdp;
- u32 rxcdp_pad[3];
-};
-
-struct kwgbe_tqx {
- u32 qxttbc;
- u32 tqxtbc;
- u32 tqxac;
- u32 tqxpad;
-};
-
-struct kwgbe_registers {
- u32 phyadr;
- u32 smi;
- u32 euda;
- u32 eudid;
- u8 pad1[0x080 - 0x00c - 4];
- u32 euic;
- u32 euim;
- u8 pad2[0x094 - 0x084 - 4];
- u32 euea;
- u32 euiae;
- u8 pad3[0x0b0 - 0x098 - 4];
- u32 euc;
- u8 pad3a[0x200 - 0x0b0 - 4];
- struct kwgbe_barsz barsz[6];
- u8 pad4[0x280 - 0x22c - 4];
- u32 ha_remap[4];
- u32 bare;
- u32 epap;
- u8 pad5[0x400 - 0x294 - 4];
- u32 pxc;
- u32 pxcx;
- u32 mii_ser_params;
- u8 pad6[0x410 - 0x408 - 4];
- u32 evlane;
- u32 macal;
- u32 macah;
- u32 sdc;
- u32 dscp[7];
- u32 psc0;
- u32 vpt2p;
- u32 ps0;
- u32 tqc;
- u32 psc1;
- u32 ps1;
- u32 mrvl_header;
- u8 pad7[0x460 - 0x454 - 4];
- u32 ic;
- u32 ice;
- u32 pim;
- u32 peim;
- u8 pad8[0x474 - 0x46c - 4];
- u32 pxtfut;
- u32 pad9;
- u32 pxmfs;
- u32 pad10;
- u32 pxdfc;
- u32 pxofc;
- u8 pad11[0x494 - 0x488 - 4];
- u32 peuiae;
- u8 pad12[0x4bc - 0x494 - 4];
- u32 eth_type_prio;
- u8 pad13[0x4dc - 0x4bc - 4];
- u32 tqfpc;
- u32 pttbrc;
- u32 tqc1;
- u32 pmtu;
- u32 pmtbs;
- u8 pad14[0x60c - 0x4ec - 4];
- struct kwgbe_rxcdp rxcdp[7];
- struct kwgbe_rxdesc *rxcdp7;
- u32 rqc;
- struct kwgbe_txdesc *tcsdp;
- u8 pad15[0x6c0 - 0x684 - 4];
- struct kwgbe_txdesc *tcqdp[8];
- u8 pad16[0x700 - 0x6dc - 4];
- struct kwgbe_tqx tqx[8];
- u32 pttbc;
- u8 pad17[0x7a8 - 0x780 - 4];
- u32 tqxipg0;
- u32 pad18[3];
- u32 tqxipg1;
- u8 pad19[0x7c0 - 0x7b8 - 4];
- u32 hitkninlopkt;
- u32 hitkninasyncpkt;
- u32 lotkninasyncpkt;
- u32 pad20;
- u32 ts;
- u8 pad21[0x3000 - 0x27d0 - 4];
- u32 pad20_1[32]; /* mib counter registes */
- u8 pad22[0x3400 - 0x3000 - sizeof(u32) * 32];
- u32 dfsmt[64];
- u32 dfomt[64];
- u32 dfut[4];
- u8 pad23[0xe20c0 - 0x7360c - 4];
- u32 pmbus_top_arbiter;
-};
-
-/* structures/enums needed by driver */
-enum kwgbe_adrwin {
- KWGBE_WIN0,
- KWGBE_WIN1,
- KWGBE_WIN2,
- KWGBE_WIN3,
- KWGBE_WIN4,
- KWGBE_WIN5
-};
-
-enum kwgbe_target {
- KWGBE_TARGET_DRAM,
- KWGBE_TARGET_DEV,
- KWGBE_TARGET_CBS,
- KWGBE_TARGET_PCI0,
- KWGBE_TARGET_PCI1
-};
-
-struct kwgbe_winparam {
- enum kwgbe_adrwin win; /* Window number */
- enum kwgbe_target target; /* System targets */
- u16 attrib; /* BAR attrib. See above macros */
- u32 base_addr; /* Window base address in u32 form */
- u32 high_addr; /* Window high address in u32 form */
- u32 size; /* Size in MBytes. Must be % 64Kbyte. */
- int enable; /* Enable/disable access to the window. */
- u16 access_ctrl; /*Access ctrl register. see above macros */
-};
-
-struct kwgbe_rxdesc {
- u32 cmd_sts; /* Descriptor command status */
- u16 buf_size; /* Buffer size */
- u16 byte_cnt; /* Descriptor buffer byte count */
- u8 *buf_ptr; /* Descriptor buffer pointer */
- struct kwgbe_rxdesc *nxtdesc_p; /* Next descriptor pointer */
-};
-
-struct kwgbe_txdesc {
- u32 cmd_sts; /* Descriptor command status */
- u16 l4i_chk; /* CPU provided TCP Checksum */
- u16 byte_cnt; /* Descriptor buffer byte count */
- u8 *buf_ptr; /* Descriptor buffer ptr */
- struct kwgbe_txdesc *nxtdesc_p; /* Next descriptor ptr */
-};
-
-/* port device data struct */
-struct kwgbe_device {
- struct eth_device dev;
- struct kwgbe_registers *regs;
- struct kwgbe_txdesc *p_txdesc;
- struct kwgbe_rxdesc *p_rxdesc;
- struct kwgbe_rxdesc *p_rxdesc_curr;
- u8 *p_rxbuf;
- u8 *p_aligned_txbuf;
-};
-
-#endif /* __EGIGA_H__ */
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index dcb8850..6a58a37 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -439,8 +439,6 @@
{
struct macb_device *macb = to_macb(netdev);
unsigned long paddr;
- u32 hwaddr_bottom;
- u16 hwaddr_top;
int i;
/*
@@ -469,12 +467,6 @@
macb_writel(macb, RBQP, macb->rx_ring_dma);
macb_writel(macb, TBQP, macb->tx_ring_dma);
- /* set hardware address */
- hwaddr_bottom = cpu_to_le32(*((u32 *)netdev->enetaddr));
- macb_writel(macb, SA1B, hwaddr_bottom);
- hwaddr_top = cpu_to_le16(*((u16 *)(netdev->enetaddr + 4)));
- macb_writel(macb, SA1T, hwaddr_top);
-
/* choose RMII or MII mode. This depends on the board */
#ifdef CONFIG_RMII
#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
@@ -521,6 +513,20 @@
macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
}
+static int macb_write_hwaddr(struct eth_device *dev)
+{
+ struct macb_device *macb = to_macb(dev);
+ u32 hwaddr_bottom;
+ u16 hwaddr_top;
+
+ /* set hardware address */
+ hwaddr_bottom = cpu_to_le32(*((u32 *)dev->enetaddr));
+ macb_writel(macb, SA1B, hwaddr_bottom);
+ hwaddr_top = cpu_to_le16(*((u16 *)(dev->enetaddr + 4)));
+ macb_writel(macb, SA1T, hwaddr_top);
+ return 0;
+}
+
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
{
struct macb_device *macb;
@@ -554,6 +560,7 @@
netdev->halt = macb_halt;
netdev->send = macb_send;
netdev->recv = macb_recv;
+ netdev->write_hwaddr = macb_write_hwaddr;
/*
* Do some basic initialization so that we at least can talk
diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c
new file mode 100644
index 0000000..cad4023
--- /dev/null
+++ b/drivers/net/mvgbe.c
@@ -0,0 +1,756 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * (C) Copyright 2003
+ * Ingo Assmus <ingo.assmus@keymile.com>
+ *
+ * based on - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <asm/errno.h>
+#include <asm/types.h>
+#include <asm/byteorder.h>
+
+#if defined(CONFIG_KIRKWOOD)
+#include <asm/arch/kirkwood.h>
+#elif defined(CONFIG_ORION5X)
+#include <asm/arch/orion5x.h>
+#endif
+
+#include "mvgbe.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MV_PHY_ADR_REQUEST 0xee
+#define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)
+
+/*
+ * smi_reg_read - miiphy_read callback function.
+ *
+ * Returns 16bit phy register value, or 0xffff on error
+ */
+static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+ struct mvgbe_registers *regs = dmvgbe->regs;
+ u32 smi_reg;
+ u32 timeout;
+
+ /* Phyadr read request */
+ if (phy_adr == MV_PHY_ADR_REQUEST &&
+ reg_ofs == MV_PHY_ADR_REQUEST) {
+ /* */
+ *data = (u16) (MVGBE_REG_RD(regs->phyadr) & PHYADR_MASK);
+ return 0;
+ }
+ /* check parameters */
+ if (phy_adr > PHYADR_MASK) {
+ printf("Err..(%s) Invalid PHY address %d\n",
+ __FUNCTION__, phy_adr);
+ return -EFAULT;
+ }
+ if (reg_ofs > PHYREG_MASK) {
+ printf("Err..(%s) Invalid register offset %d\n",
+ __FUNCTION__, reg_ofs);
+ return -EFAULT;
+ }
+
+ timeout = MVGBE_PHY_SMI_TIMEOUT;
+ /* wait till the SMI is not busy */
+ do {
+ /* read smi register */
+ smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
+ if (timeout-- == 0) {
+ printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
+ return -EFAULT;
+ }
+ } while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
+
+ /* fill the phy address and regiser offset and read opcode */
+ smi_reg = (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
+ | (reg_ofs << MVGBE_SMI_REG_ADDR_OFFS)
+ | MVGBE_PHY_SMI_OPCODE_READ;
+
+ /* write the smi register */
+ MVGBE_REG_WR(MVGBE_SMI_REG, smi_reg);
+
+ /*wait till read value is ready */
+ timeout = MVGBE_PHY_SMI_TIMEOUT;
+
+ do {
+ /* read smi register */
+ smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
+ if (timeout-- == 0) {
+ printf("Err..(%s) SMI read ready timeout\n",
+ __FUNCTION__);
+ return -EFAULT;
+ }
+ } while (!(smi_reg & MVGBE_PHY_SMI_READ_VALID_MASK));
+
+ /* Wait for the data to update in the SMI register */
+ for (timeout = 0; timeout < MVGBE_PHY_SMI_TIMEOUT; timeout++)
+ ;
+
+ *data = (u16) (MVGBE_REG_RD(MVGBE_SMI_REG) & MVGBE_PHY_SMI_DATA_MASK);
+
+ debug("%s:(adr %d, off %d) value= %04x\n", __FUNCTION__, phy_adr,
+ reg_ofs, *data);
+
+ return 0;
+}
+
+/*
+ * smi_reg_write - imiiphy_write callback function.
+ *
+ * Returns 0 if write succeed, -EINVAL on bad parameters
+ * -ETIME on timeout
+ */
+static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+ struct mvgbe_registers *regs = dmvgbe->regs;
+ u32 smi_reg;
+ u32 timeout;
+
+ /* Phyadr write request*/
+ if (phy_adr == MV_PHY_ADR_REQUEST &&
+ reg_ofs == MV_PHY_ADR_REQUEST) {
+ MVGBE_REG_WR(regs->phyadr, data);
+ return 0;
+ }
+
+ /* check parameters */
+ if (phy_adr > PHYADR_MASK) {
+ printf("Err..(%s) Invalid phy address\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ if (reg_ofs > PHYREG_MASK) {
+ printf("Err..(%s) Invalid register offset\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* wait till the SMI is not busy */
+ timeout = MVGBE_PHY_SMI_TIMEOUT;
+ do {
+ /* read smi register */
+ smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
+ if (timeout-- == 0) {
+ printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
+ return -ETIME;
+ }
+ } while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
+
+ /* fill the phy addr and reg offset and write opcode and data */
+ smi_reg = (data << MVGBE_PHY_SMI_DATA_OFFS);
+ smi_reg |= (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
+ | (reg_ofs << MVGBE_SMI_REG_ADDR_OFFS);
+ smi_reg &= ~MVGBE_PHY_SMI_OPCODE_READ;
+
+ /* write the smi register */
+ MVGBE_REG_WR(MVGBE_SMI_REG, smi_reg);
+
+ return 0;
+}
+
+/* Stop and checks all queues */
+static void stop_queue(u32 * qreg)
+{
+ u32 reg_data;
+
+ reg_data = readl(qreg);
+
+ if (reg_data & 0xFF) {
+ /* Issue stop command for active channels only */
+ writel((reg_data << 8), qreg);
+
+ /* Wait for all queue activity to terminate. */
+ do {
+ /*
+ * Check port cause register that all queues
+ * are stopped
+ */
+ reg_data = readl(qreg);
+ }
+ while (reg_data & 0xFF);
+ }
+}
+
+/*
+ * set_access_control - Config address decode parameters for Ethernet unit
+ *
+ * This function configures the address decode parameters for the Gigabit
+ * Ethernet Controller according the given parameters struct.
+ *
+ * @regs Register struct pointer.
+ * @param Address decode parameter struct.
+ */
+static void set_access_control(struct mvgbe_registers *regs,
+ struct mvgbe_winparam *param)
+{
+ u32 access_prot_reg;
+
+ /* Set access control register */
+ access_prot_reg = MVGBE_REG_RD(regs->epap);
+ /* clear window permission */
+ access_prot_reg &= (~(3 << (param->win * 2)));
+ access_prot_reg |= (param->access_ctrl << (param->win * 2));
+ MVGBE_REG_WR(regs->epap, access_prot_reg);
+
+ /* Set window Size reg (SR) */
+ MVGBE_REG_WR(regs->barsz[param->win].size,
+ (((param->size / 0x10000) - 1) << 16));
+
+ /* Set window Base address reg (BA) */
+ MVGBE_REG_WR(regs->barsz[param->win].bar,
+ (param->target | param->attrib | param->base_addr));
+ /* High address remap reg (HARR) */
+ if (param->win < 4)
+ MVGBE_REG_WR(regs->ha_remap[param->win], param->high_addr);
+
+ /* Base address enable reg (BARER) */
+ if (param->enable == 1)
+ MVGBE_REG_BITS_RESET(regs->bare, (1 << param->win));
+ else
+ MVGBE_REG_BITS_SET(regs->bare, (1 << param->win));
+}
+
+static void set_dram_access(struct mvgbe_registers *regs)
+{
+ struct mvgbe_winparam win_param;
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ /* Set access parameters for DRAM bank i */
+ win_param.win = i; /* Use Ethernet window i */
+ /* Window target - DDR */
+ win_param.target = MVGBE_TARGET_DRAM;
+ /* Enable full access */
+ win_param.access_ctrl = EWIN_ACCESS_FULL;
+ win_param.high_addr = 0;
+ /* Get bank base and size */
+ win_param.base_addr = gd->bd->bi_dram[i].start;
+ win_param.size = gd->bd->bi_dram[i].size;
+ if (win_param.size == 0)
+ win_param.enable = 0;
+ else
+ win_param.enable = 1; /* Enable the access */
+
+ /* Enable DRAM bank */
+ switch (i) {
+ case 0:
+ win_param.attrib = EBAR_DRAM_CS0;
+ break;
+ case 1:
+ win_param.attrib = EBAR_DRAM_CS1;
+ break;
+ case 2:
+ win_param.attrib = EBAR_DRAM_CS2;
+ break;
+ case 3:
+ win_param.attrib = EBAR_DRAM_CS3;
+ break;
+ default:
+ /* invalid bank, disable access */
+ win_param.enable = 0;
+ win_param.attrib = 0;
+ break;
+ }
+ /* Set the access control for address window(EPAPR) RD/WR */
+ set_access_control(regs, &win_param);
+ }
+}
+
+/*
+ * port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
+ *
+ * Go through all the DA filter tables (Unicast, Special Multicast & Other
+ * Multicast) and set each entry to 0.
+ */
+static void port_init_mac_tables(struct mvgbe_registers *regs)
+{
+ int table_index;
+
+ /* Clear DA filter unicast table (Ex_dFUT) */
+ for (table_index = 0; table_index < 4; ++table_index)
+ MVGBE_REG_WR(regs->dfut[table_index], 0);
+
+ for (table_index = 0; table_index < 64; ++table_index) {
+ /* Clear DA filter special multicast table (Ex_dFSMT) */
+ MVGBE_REG_WR(regs->dfsmt[table_index], 0);
+ /* Clear DA filter other multicast table (Ex_dFOMT) */
+ MVGBE_REG_WR(regs->dfomt[table_index], 0);
+ }
+}
+
+/*
+ * port_uc_addr - This function Set the port unicast address table
+ *
+ * This function locates the proper entry in the Unicast table for the
+ * specified MAC nibble and sets its properties according to function
+ * parameters.
+ * This function add/removes MAC addresses from the port unicast address
+ * table.
+ *
+ * @uc_nibble Unicast MAC Address last nibble.
+ * @option 0 = Add, 1 = remove address.
+ *
+ * RETURN: 1 if output succeeded. 0 if option parameter is invalid.
+ */
+static int port_uc_addr(struct mvgbe_registers *regs, u8 uc_nibble,
+ int option)
+{
+ u32 unicast_reg;
+ u32 tbl_offset;
+ u32 reg_offset;
+
+ /* Locate the Unicast table entry */
+ uc_nibble = (0xf & uc_nibble);
+ /* Register offset from unicast table base */
+ tbl_offset = (uc_nibble / 4);
+ /* Entry offset within the above register */
+ reg_offset = uc_nibble % 4;
+
+ switch (option) {
+ case REJECT_MAC_ADDR:
+ /*
+ * Clear accepts frame bit at specified unicast
+ * DA table entry
+ */
+ unicast_reg = MVGBE_REG_RD(regs->dfut[tbl_offset]);
+ unicast_reg &= (0xFF << (8 * reg_offset));
+ MVGBE_REG_WR(regs->dfut[tbl_offset], unicast_reg);
+ break;
+ case ACCEPT_MAC_ADDR:
+ /* Set accepts frame bit at unicast DA filter table entry */
+ unicast_reg = MVGBE_REG_RD(regs->dfut[tbl_offset]);
+ unicast_reg &= (0xFF << (8 * reg_offset));
+ unicast_reg |= ((0x01 | (RXUQ << 1)) << (8 * reg_offset));
+ MVGBE_REG_WR(regs->dfut[tbl_offset], unicast_reg);
+ break;
+ default:
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * port_uc_addr_set - This function Set the port Unicast address.
+ */
+static void port_uc_addr_set(struct mvgbe_registers *regs, u8 * p_addr)
+{
+ u32 mac_h;
+ u32 mac_l;
+
+ mac_l = (p_addr[4] << 8) | (p_addr[5]);
+ mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
+ (p_addr[3] << 0);
+
+ MVGBE_REG_WR(regs->macal, mac_l);
+ MVGBE_REG_WR(regs->macah, mac_h);
+
+ /* Accept frames of this address */
+ port_uc_addr(regs, p_addr[5], ACCEPT_MAC_ADDR);
+}
+
+/*
+ * mvgbe_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
+ */
+static void mvgbe_init_rx_desc_ring(struct mvgbe_device *dmvgbe)
+{
+ struct mvgbe_rxdesc *p_rx_desc;
+ int i;
+
+ /* initialize the Rx descriptors ring */
+ p_rx_desc = dmvgbe->p_rxdesc;
+ for (i = 0; i < RINGSZ; i++) {
+ p_rx_desc->cmd_sts =
+ MVGBE_BUFFER_OWNED_BY_DMA | MVGBE_RX_EN_INTERRUPT;
+ p_rx_desc->buf_size = PKTSIZE_ALIGN;
+ p_rx_desc->byte_cnt = 0;
+ p_rx_desc->buf_ptr = dmvgbe->p_rxbuf + i * PKTSIZE_ALIGN;
+ if (i == (RINGSZ - 1))
+ p_rx_desc->nxtdesc_p = dmvgbe->p_rxdesc;
+ else {
+ p_rx_desc->nxtdesc_p = (struct mvgbe_rxdesc *)
+ ((u32) p_rx_desc + MV_RXQ_DESC_ALIGNED_SIZE);
+ p_rx_desc = p_rx_desc->nxtdesc_p;
+ }
+ }
+ dmvgbe->p_rxdesc_curr = dmvgbe->p_rxdesc;
+}
+
+static int mvgbe_init(struct eth_device *dev)
+{
+ struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+ struct mvgbe_registers *regs = dmvgbe->regs;
+#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \
+ && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
+ int i;
+#endif
+ /* setup RX rings */
+ mvgbe_init_rx_desc_ring(dmvgbe);
+
+ /* Clear the ethernet port interrupts */
+ MVGBE_REG_WR(regs->ic, 0);
+ MVGBE_REG_WR(regs->ice, 0);
+ /* Unmask RX buffer and TX end interrupt */
+ MVGBE_REG_WR(regs->pim, INT_CAUSE_UNMASK_ALL);
+ /* Unmask phy and link status changes interrupts */
+ MVGBE_REG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT);
+
+ set_dram_access(regs);
+ port_init_mac_tables(regs);
+ port_uc_addr_set(regs, dmvgbe->dev.enetaddr);
+
+ /* Assign port configuration and command. */
+ MVGBE_REG_WR(regs->pxc, PRT_CFG_VAL);
+ MVGBE_REG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE);
+ MVGBE_REG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE);
+
+ /* Assign port SDMA configuration */
+ MVGBE_REG_WR(regs->sdc, PORT_SDMA_CFG_VALUE);
+ MVGBE_REG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL);
+ MVGBE_REG_WR(regs->tqx[0].tqxtbc,
+ (QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL);
+ /* Turn off the port/RXUQ bandwidth limitation */
+ MVGBE_REG_WR(regs->pmtu, 0);
+
+ /* Set maximum receive buffer to 9700 bytes */
+ MVGBE_REG_WR(regs->psc0, MVGBE_MAX_RX_PACKET_9700BYTE
+ | (MVGBE_REG_RD(regs->psc0) & MRU_MASK));
+
+ /* Enable port initially */
+ MVGBE_REG_BITS_SET(regs->psc0, MVGBE_SERIAL_PORT_EN);
+
+ /*
+ * Set ethernet MTU for leaky bucket mechanism to 0 - this will
+ * disable the leaky bucket mechanism .
+ */
+ MVGBE_REG_WR(regs->pmtu, 0);
+
+ /* Assignment of Rx CRDB of given RXUQ */
+ MVGBE_REG_WR(regs->rxcdp[RXUQ], (u32) dmvgbe->p_rxdesc_curr);
+ /* ensure previous write is done before enabling Rx DMA */
+ isb();
+ /* Enable port Rx. */
+ MVGBE_REG_WR(regs->rqc, (1 << RXUQ));
+
+#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \
+ && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
+ /* Wait up to 5s for the link status */
+ for (i = 0; i < 5; i++) {
+ u16 phyadr;
+
+ miiphy_read(dev->name, MV_PHY_ADR_REQUEST,
+ MV_PHY_ADR_REQUEST, &phyadr);
+ /* Return if we get link up */
+ if (miiphy_link(dev->name, phyadr))
+ return 0;
+ udelay(1000000);
+ }
+
+ printf("No link on %s\n", dev->name);
+ return -1;
+#endif
+ return 0;
+}
+
+static int mvgbe_halt(struct eth_device *dev)
+{
+ struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+ struct mvgbe_registers *regs = dmvgbe->regs;
+
+ /* Disable all gigE address decoder */
+ MVGBE_REG_WR(regs->bare, 0x3f);
+
+ stop_queue(®s->tqc);
+ stop_queue(®s->rqc);
+
+ /* Disable port */
+ MVGBE_REG_BITS_RESET(regs->psc0, MVGBE_SERIAL_PORT_EN);
+ /* Set port is not reset */
+ MVGBE_REG_BITS_RESET(regs->psc1, 1 << 4);
+#ifdef CONFIG_SYS_MII_MODE
+ /* Set MMI interface up */
+ MVGBE_REG_BITS_RESET(regs->psc1, 1 << 3);
+#endif
+ /* Disable & mask ethernet port interrupts */
+ MVGBE_REG_WR(regs->ic, 0);
+ MVGBE_REG_WR(regs->ice, 0);
+ MVGBE_REG_WR(regs->pim, 0);
+ MVGBE_REG_WR(regs->peim, 0);
+
+ return 0;
+}
+
+static int mvgbe_write_hwaddr(struct eth_device *dev)
+{
+ struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+ struct mvgbe_registers *regs = dmvgbe->regs;
+
+ /* Programs net device MAC address after initialization */
+ port_uc_addr_set(regs, dmvgbe->dev.enetaddr);
+ return 0;
+}
+
+static int mvgbe_send(struct eth_device *dev, void *dataptr,
+ int datasize)
+{
+ struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+ struct mvgbe_registers *regs = dmvgbe->regs;
+ struct mvgbe_txdesc *p_txdesc = dmvgbe->p_txdesc;
+ void *p = (void *)dataptr;
+ u32 cmd_sts;
+
+ /* Copy buffer if it's misaligned */
+ if ((u32) dataptr & 0x07) {
+ if (datasize > PKTSIZE_ALIGN) {
+ printf("Non-aligned data too large (%d)\n",
+ datasize);
+ return -1;
+ }
+
+ memcpy(dmvgbe->p_aligned_txbuf, p, datasize);
+ p = dmvgbe->p_aligned_txbuf;
+ }
+
+ p_txdesc->cmd_sts = MVGBE_ZERO_PADDING | MVGBE_GEN_CRC;
+ p_txdesc->cmd_sts |= MVGBE_TX_FIRST_DESC | MVGBE_TX_LAST_DESC;
+ p_txdesc->cmd_sts |= MVGBE_BUFFER_OWNED_BY_DMA;
+ p_txdesc->cmd_sts |= MVGBE_TX_EN_INTERRUPT;
+ p_txdesc->buf_ptr = (u8 *) p;
+ p_txdesc->byte_cnt = datasize;
+
+ /* Set this tc desc as zeroth TXUQ */
+ MVGBE_REG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc);
+
+ /* ensure tx desc writes above are performed before we start Tx DMA */
+ isb();
+
+ /* Apply send command using zeroth TXUQ */
+ MVGBE_REG_WR(regs->tqc, (1 << TXUQ));
+
+ /*
+ * wait for packet xmit completion
+ */
+ cmd_sts = readl(&p_txdesc->cmd_sts);
+ while (cmd_sts & MVGBE_BUFFER_OWNED_BY_DMA) {
+ /* return fail if error is detected */
+ if ((cmd_sts & (MVGBE_ERROR_SUMMARY | MVGBE_TX_LAST_FRAME)) ==
+ (MVGBE_ERROR_SUMMARY | MVGBE_TX_LAST_FRAME) &&
+ cmd_sts & (MVGBE_UR_ERROR | MVGBE_RL_ERROR)) {
+ printf("Err..(%s) in xmit packet\n", __FUNCTION__);
+ return -1;
+ }
+ cmd_sts = readl(&p_txdesc->cmd_sts);
+ };
+ return 0;
+}
+
+static int mvgbe_recv(struct eth_device *dev)
+{
+ struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+ struct mvgbe_rxdesc *p_rxdesc_curr = dmvgbe->p_rxdesc_curr;
+ u32 cmd_sts;
+ u32 timeout = 0;
+
+ /* wait untill rx packet available or timeout */
+ do {
+ if (timeout < MVGBE_PHY_SMI_TIMEOUT)
+ timeout++;
+ else {
+ debug("%s time out...\n", __FUNCTION__);
+ return -1;
+ }
+ } while (readl(&p_rxdesc_curr->cmd_sts) & MVGBE_BUFFER_OWNED_BY_DMA);
+
+ if (p_rxdesc_curr->byte_cnt != 0) {
+ debug("%s: Received %d byte Packet @ 0x%x (cmd_sts= %08x)\n",
+ __FUNCTION__, (u32) p_rxdesc_curr->byte_cnt,
+ (u32) p_rxdesc_curr->buf_ptr,
+ (u32) p_rxdesc_curr->cmd_sts);
+ }
+
+ /*
+ * In case received a packet without first/last bits on
+ * OR the error summary bit is on,
+ * the packets needs to be dropeed.
+ */
+ cmd_sts = readl(&p_rxdesc_curr->cmd_sts);
+
+ if ((cmd_sts &
+ (MVGBE_RX_FIRST_DESC | MVGBE_RX_LAST_DESC))
+ != (MVGBE_RX_FIRST_DESC | MVGBE_RX_LAST_DESC)) {
+
+ printf("Err..(%s) Dropping packet spread on"
+ " multiple descriptors\n", __FUNCTION__);
+
+ } else if (cmd_sts & MVGBE_ERROR_SUMMARY) {
+
+ printf("Err..(%s) Dropping packet with errors\n",
+ __FUNCTION__);
+
+ } else {
+ /* !!! call higher layer processing */
+ debug("%s: Sending Received packet to"
+ " upper layer (NetReceive)\n", __FUNCTION__);
+
+ /* let the upper layer handle the packet */
+ NetReceive((p_rxdesc_curr->buf_ptr + RX_BUF_OFFSET),
+ (int)(p_rxdesc_curr->byte_cnt - RX_BUF_OFFSET));
+ }
+ /*
+ * free these descriptors and point next in the ring
+ */
+ p_rxdesc_curr->cmd_sts =
+ MVGBE_BUFFER_OWNED_BY_DMA | MVGBE_RX_EN_INTERRUPT;
+ p_rxdesc_curr->buf_size = PKTSIZE_ALIGN;
+ p_rxdesc_curr->byte_cnt = 0;
+
+ writel((unsigned)p_rxdesc_curr->nxtdesc_p,
+ (u32) &dmvgbe->p_rxdesc_curr);
+
+ return 0;
+}
+
+int mvgbe_initialize(bd_t *bis)
+{
+ struct mvgbe_device *dmvgbe;
+ struct eth_device *dev;
+ int devnum;
+ char *s;
+ u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS;
+
+ for (devnum = 0; devnum < MAX_MVGBE_DEVS; devnum++) {
+ /*skip if port is configured not to use */
+ if (used_ports[devnum] == 0)
+ continue;
+
+ dmvgbe = malloc(sizeof(struct mvgbe_device));
+
+ if (!dmvgbe)
+ goto error1;
+
+ memset(dmvgbe, 0, sizeof(struct mvgbe_device));
+
+ dmvgbe->p_rxdesc =
+ (struct mvgbe_rxdesc *)memalign(PKTALIGN,
+ MV_RXQ_DESC_ALIGNED_SIZE*RINGSZ + 1);
+
+ if (!dmvgbe->p_rxdesc)
+ goto error2;
+
+ dmvgbe->p_rxbuf = (u8 *) memalign(PKTALIGN,
+ RINGSZ*PKTSIZE_ALIGN + 1);
+
+ if (!dmvgbe->p_rxbuf)
+ goto error3;
+
+ dmvgbe->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN);
+
+ if (!dmvgbe->p_aligned_txbuf)
+ goto error4;
+
+ dmvgbe->p_txdesc = (struct mvgbe_txdesc *) memalign(
+ PKTALIGN, sizeof(struct mvgbe_txdesc) + 1);
+
+ if (!dmvgbe->p_txdesc) {
+ free(dmvgbe->p_aligned_txbuf);
+error4:
+ free(dmvgbe->p_rxbuf);
+error3:
+ free(dmvgbe->p_rxdesc);
+error2:
+ free(dmvgbe);
+error1:
+ printf("Err.. %s Failed to allocate memory\n",
+ __FUNCTION__);
+ return -1;
+ }
+
+ dev = &dmvgbe->dev;
+
+ /* must be less than NAMESIZE (16) */
+ sprintf(dev->name, "egiga%d", devnum);
+
+ /* Extract the MAC address from the environment */
+ switch (devnum) {
+ case 0:
+ dmvgbe->regs = (void *)MVGBE0_BASE;
+ s = "ethaddr";
+ break;
+#if defined(MVGBE1_BASE)
+ case 1:
+ dmvgbe->regs = (void *)MVGBE1_BASE;
+ s = "eth1addr";
+ break;
+#endif
+ default: /* this should never happen */
+ printf("Err..(%s) Invalid device number %d\n",
+ __FUNCTION__, devnum);
+ return -1;
+ }
+
+ while (!eth_getenv_enetaddr(s, dev->enetaddr)) {
+ /* Generate Private MAC addr if not set */
+ dev->enetaddr[0] = 0x02;
+ dev->enetaddr[1] = 0x50;
+ dev->enetaddr[2] = 0x43;
+#if defined (CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION)
+ /* Generate fixed lower MAC half using devnum */
+ dev->enetaddr[3] = 0;
+ dev->enetaddr[4] = 0;
+ dev->enetaddr[5] = devnum;
+#else
+ /* Generate random lower MAC half */
+ dev->enetaddr[3] = get_random_hex();
+ dev->enetaddr[4] = get_random_hex();
+ dev->enetaddr[5] = get_random_hex();
+#endif
+ eth_setenv_enetaddr(s, dev->enetaddr);
+ }
+
+ dev->init = (void *)mvgbe_init;
+ dev->halt = (void *)mvgbe_halt;
+ dev->send = (void *)mvgbe_send;
+ dev->recv = (void *)mvgbe_recv;
+ dev->write_hwaddr = (void *)mvgbe_write_hwaddr;
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name, smi_reg_read, smi_reg_write);
+ /* Set phy address of the port */
+ miiphy_write(dev->name, MV_PHY_ADR_REQUEST,
+ MV_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum);
+#endif
+ }
+ return 0;
+}
diff --git a/drivers/net/mvgbe.h b/drivers/net/mvgbe.h
new file mode 100644
index 0000000..3de98d0
--- /dev/null
+++ b/drivers/net/mvgbe.h
@@ -0,0 +1,505 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * based on - Driver for MV64360X ethernet ports
+ * Copyright (C) 2002 rabeeh@galileo.co.il
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __MVGBE_H__
+#define __MVGBE_H__
+
+/* PHY_BASE_ADR is board specific and can be configured */
+#if defined (CONFIG_PHY_BASE_ADR)
+#define PHY_BASE_ADR CONFIG_PHY_BASE_ADR
+#else
+#define PHY_BASE_ADR 0x08 /* default phy base addr */
+#endif
+
+/* Constants */
+#define INT_CAUSE_UNMASK_ALL 0x0007ffff
+#define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff
+#define MRU_MASK 0xfff1ffff
+#define PHYADR_MASK 0x0000001f
+#define PHYREG_MASK 0x0000001f
+#define QTKNBKT_DEF_VAL 0x3fffffff
+#define QMTBS_DEF_VAL 0x000003ff
+#define QTKNRT_DEF_VAL 0x0000fcff
+#define RXUQ 0 /* Used Rx queue */
+#define TXUQ 0 /* Used Rx queue */
+
+#define to_mvgbe(_d) container_of(_d, struct mvgbe_device, dev)
+#define MVGBE_REG_WR(adr, val) writel(val, &adr)
+#define MVGBE_REG_RD(adr) readl(&adr)
+#define MVGBE_REG_BITS_RESET(adr, val) writel(readl(&adr) & ~(val), &adr)
+#define MVGBE_REG_BITS_SET(adr, val) writel(readl(&adr) | val, &adr)
+
+/* Default port configuration value */
+#define PRT_CFG_VAL ( \
+ MVGBE_UCAST_MOD_NRML | \
+ MVGBE_DFLT_RXQ(RXUQ) | \
+ MVGBE_DFLT_RX_ARPQ(RXUQ) | \
+ MVGBE_RX_BC_IF_NOT_IP_OR_ARP | \
+ MVGBE_RX_BC_IF_IP | \
+ MVGBE_RX_BC_IF_ARP | \
+ MVGBE_CPTR_TCP_FRMS_DIS | \
+ MVGBE_CPTR_UDP_FRMS_DIS | \
+ MVGBE_DFLT_RX_TCPQ(RXUQ) | \
+ MVGBE_DFLT_RX_UDPQ(RXUQ) | \
+ MVGBE_DFLT_RX_BPDUQ(RXUQ))
+
+/* Default port extend configuration value */
+#define PORT_CFG_EXTEND_VALUE \
+ MVGBE_SPAN_BPDU_PACKETS_AS_NORMAL | \
+ MVGBE_PARTITION_DIS | \
+ MVGBE_TX_CRC_GENERATION_EN
+
+#define GT_MVGBE_IPG_INT_RX(value) ((value & 0x3fff) << 8)
+
+/* Default sdma control value */
+#define PORT_SDMA_CFG_VALUE ( \
+ MVGBE_RX_BURST_SIZE_16_64BIT | \
+ MVGBE_BLM_RX_NO_SWAP | \
+ MVGBE_BLM_TX_NO_SWAP | \
+ GT_MVGBE_IPG_INT_RX(RXUQ) | \
+ MVGBE_TX_BURST_SIZE_16_64BIT)
+
+/* Default port serial control value */
+#define PORT_SERIAL_CONTROL_VALUE ( \
+ MVGBE_FORCE_LINK_PASS | \
+ MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
+ MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
+ MVGBE_ADV_NO_FLOW_CTRL | \
+ MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
+ MVGBE_FORCE_BP_MODE_NO_JAM | \
+ (1 << 9) /* Reserved bit has to be 1 */ | \
+ MVGBE_DO_NOT_FORCE_LINK_FAIL | \
+ MVGBE_EN_AUTO_NEG_SPEED_GMII | \
+ MVGBE_DTE_ADV_0 | \
+ MVGBE_MIIPHY_MAC_MODE | \
+ MVGBE_AUTO_NEG_NO_CHANGE | \
+ MVGBE_MAX_RX_PACKET_1552BYTE | \
+ MVGBE_CLR_EXT_LOOPBACK | \
+ MVGBE_SET_FULL_DUPLEX_MODE | \
+ MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX)
+
+/* Tx WRR confoguration macros */
+#define PORT_MAX_TRAN_UNIT 0x24 /* MTU register (default) 9KByte */
+#define PORT_MAX_TOKEN_BUCKET_SIZE 0x_FFFF /* PMTBS reg (default) */
+#define PORT_TOKEN_RATE 1023 /* PTTBRC reg (default) */
+/* MAC accepet/reject macros */
+#define ACCEPT_MAC_ADDR 0
+#define REJECT_MAC_ADDR 1
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define MV_RXQ_DESC_ALIGNED_SIZE \
+ (((sizeof(struct mvgbe_rxdesc) / PKTALIGN) + 1) * PKTALIGN)
+/* Buffer offset from buffer pointer */
+#define RX_BUF_OFFSET 0x2
+
+/* Port serial status reg (PSR) */
+#define MVGBE_INTERFACE_GMII_MII 0
+#define MVGBE_INTERFACE_PCM 1
+#define MVGBE_LINK_IS_DOWN 0
+#define MVGBE_LINK_IS_UP (1 << 1)
+#define MVGBE_PORT_AT_HALF_DUPLEX 0
+#define MVGBE_PORT_AT_FULL_DUPLEX (1 << 2)
+#define MVGBE_RX_FLOW_CTRL_DISD 0
+#define MVGBE_RX_FLOW_CTRL_ENBALED (1 << 3)
+#define MVGBE_GMII_SPEED_100_10 0
+#define MVGBE_GMII_SPEED_1000 (1 << 4)
+#define MVGBE_MII_SPEED_10 0
+#define MVGBE_MII_SPEED_100 (1 << 5)
+#define MVGBE_NO_TX 0
+#define MVGBE_TX_IN_PROGRESS (1 << 7)
+#define MVGBE_BYPASS_NO_ACTIVE 0
+#define MVGBE_BYPASS_ACTIVE (1 << 8)
+#define MVGBE_PORT_NOT_AT_PARTN_STT 0
+#define MVGBE_PORT_AT_PARTN_STT (1 << 9)
+#define MVGBE_PORT_TX_FIFO_NOT_EMPTY 0
+#define MVGBE_PORT_TX_FIFO_EMPTY (1 << 10)
+
+/* These macros describes the Port configuration reg (Px_cR) bits */
+#define MVGBE_UCAST_MOD_NRML 0
+#define MVGBE_UNICAST_PROMISCUOUS_MODE 1
+#define MVGBE_DFLT_RXQ(_x) (_x << 1)
+#define MVGBE_DFLT_RX_ARPQ(_x) (_x << 4)
+#define MVGBE_RX_BC_IF_NOT_IP_OR_ARP 0
+#define MVGBE_REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7)
+#define MVGBE_RX_BC_IF_IP 0
+#define MVGBE_REJECT_BC_IF_IP (1 << 8)
+#define MVGBE_RX_BC_IF_ARP 0
+#define MVGBE_REJECT_BC_IF_ARP (1 << 9)
+#define MVGBE_TX_AM_NO_UPDATE_ERR_SMRY (1 << 12)
+#define MVGBE_CPTR_TCP_FRMS_DIS 0
+#define MVGBE_CPTR_TCP_FRMS_EN (1 << 14)
+#define MVGBE_CPTR_UDP_FRMS_DIS 0
+#define MVGBE_CPTR_UDP_FRMS_EN (1 << 15)
+#define MVGBE_DFLT_RX_TCPQ(_x) (_x << 16)
+#define MVGBE_DFLT_RX_UDPQ(_x) (_x << 19)
+#define MVGBE_DFLT_RX_BPDUQ(_x) (_x << 22)
+#define MVGBE_DFLT_RX_TCP_CHKSUM_MODE (1 << 25)
+
+/* These macros describes the Port configuration extend reg (Px_cXR) bits*/
+#define MVGBE_CLASSIFY_EN 1
+#define MVGBE_SPAN_BPDU_PACKETS_AS_NORMAL 0
+#define MVGBE_SPAN_BPDU_PACKETS_TO_RX_Q7 (1 << 1)
+#define MVGBE_PARTITION_DIS 0
+#define MVGBE_PARTITION_EN (1 << 2)
+#define MVGBE_TX_CRC_GENERATION_EN 0
+#define MVGBE_TX_CRC_GENERATION_DIS (1 << 3)
+
+/* These macros describes the Port Sdma configuration reg (SDCR) bits */
+#define MVGBE_RIFB 1
+#define MVGBE_RX_BURST_SIZE_1_64BIT 0
+#define MVGBE_RX_BURST_SIZE_2_64BIT (1 << 1)
+#define MVGBE_RX_BURST_SIZE_4_64BIT (1 << 2)
+#define MVGBE_RX_BURST_SIZE_8_64BIT ((1 << 2) | (1 << 1))
+#define MVGBE_RX_BURST_SIZE_16_64BIT (1 << 3)
+#define MVGBE_BLM_RX_NO_SWAP (1 << 4)
+#define MVGBE_BLM_RX_BYTE_SWAP 0
+#define MVGBE_BLM_TX_NO_SWAP (1 << 5)
+#define MVGBE_BLM_TX_BYTE_SWAP 0
+#define MVGBE_DESCRIPTORS_BYTE_SWAP (1 << 6)
+#define MVGBE_DESCRIPTORS_NO_SWAP 0
+#define MVGBE_TX_BURST_SIZE_1_64BIT 0
+#define MVGBE_TX_BURST_SIZE_2_64BIT (1 << 22)
+#define MVGBE_TX_BURST_SIZE_4_64BIT (1 << 23)
+#define MVGBE_TX_BURST_SIZE_8_64BIT ((1 << 23) | (1 << 22))
+#define MVGBE_TX_BURST_SIZE_16_64BIT (1 << 24)
+
+/* These macros describes the Port serial control reg (PSCR) bits */
+#define MVGBE_SERIAL_PORT_DIS 0
+#define MVGBE_SERIAL_PORT_EN 1
+#define MVGBE_FORCE_LINK_PASS (1 << 1)
+#define MVGBE_DO_NOT_FORCE_LINK_PASS 0
+#define MVGBE_EN_AUTO_NEG_FOR_DUPLX 0
+#define MVGBE_DIS_AUTO_NEG_FOR_DUPLX (1 << 2)
+#define MVGBE_EN_AUTO_NEG_FOR_FLOW_CTRL 0
+#define MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL (1 << 3)
+#define MVGBE_ADV_NO_FLOW_CTRL 0
+#define MVGBE_ADV_SYMMETRIC_FLOW_CTRL (1 << 4)
+#define MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX 0
+#define MVGBE_FORCE_FC_MODE_TX_PAUSE_DIS (1 << 5)
+#define MVGBE_FORCE_BP_MODE_NO_JAM 0
+#define MVGBE_FORCE_BP_MODE_JAM_TX (1 << 7)
+#define MVGBE_FORCE_BP_MODE_JAM_TX_ON_RX_ERR (1 << 8)
+#define MVGBE_FORCE_LINK_FAIL 0
+#define MVGBE_DO_NOT_FORCE_LINK_FAIL (1 << 10)
+#define MVGBE_DIS_AUTO_NEG_SPEED_GMII (1 << 13)
+#define MVGBE_EN_AUTO_NEG_SPEED_GMII 0
+#define MVGBE_DTE_ADV_0 0
+#define MVGBE_DTE_ADV_1 (1 << 14)
+#define MVGBE_MIIPHY_MAC_MODE 0
+#define MVGBE_MIIPHY_PHY_MODE (1 << 15)
+#define MVGBE_AUTO_NEG_NO_CHANGE 0
+#define MVGBE_RESTART_AUTO_NEG (1 << 16)
+#define MVGBE_MAX_RX_PACKET_1518BYTE 0
+#define MVGBE_MAX_RX_PACKET_1522BYTE (1 << 17)
+#define MVGBE_MAX_RX_PACKET_1552BYTE (1 << 18)
+#define MVGBE_MAX_RX_PACKET_9022BYTE ((1 << 18) | (1 << 17))
+#define MVGBE_MAX_RX_PACKET_9192BYTE (1 << 19)
+#define MVGBE_MAX_RX_PACKET_9700BYTE ((1 << 19) | (1 << 17))
+#define MVGBE_SET_EXT_LOOPBACK (1 << 20)
+#define MVGBE_CLR_EXT_LOOPBACK 0
+#define MVGBE_SET_FULL_DUPLEX_MODE (1 << 21)
+#define MVGBE_SET_HALF_DUPLEX_MODE 0
+#define MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX (1 << 22)
+#define MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0
+#define MVGBE_SET_GMII_SPEED_TO_10_100 0
+#define MVGBE_SET_GMII_SPEED_TO_1000 (1 << 23)
+#define MVGBE_SET_MII_SPEED_TO_10 0
+#define MVGBE_SET_MII_SPEED_TO_100 (1 << 24)
+
+/* SMI register fields */
+#define MVGBE_PHY_SMI_TIMEOUT 10000
+#define MVGBE_PHY_SMI_DATA_OFFS 0 /* Data */
+#define MVGBE_PHY_SMI_DATA_MASK (0xffff << MVGBE_PHY_SMI_DATA_OFFS)
+#define MVGBE_PHY_SMI_DEV_ADDR_OFFS 16 /* PHY device address */
+#define MVGBE_PHY_SMI_DEV_ADDR_MASK \
+ (PHYADR_MASK << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
+#define MVGBE_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr */
+#define MVGBE_SMI_REG_ADDR_MASK \
+ (PHYADR_MASK << MVGBE_SMI_REG_ADDR_OFFS)
+#define MVGBE_PHY_SMI_OPCODE_OFFS 26 /* Write/Read opcode */
+#define MVGBE_PHY_SMI_OPCODE_MASK (3 << MVGBE_PHY_SMI_OPCODE_OFFS)
+#define MVGBE_PHY_SMI_OPCODE_WRITE (0 << MVGBE_PHY_SMI_OPCODE_OFFS)
+#define MVGBE_PHY_SMI_OPCODE_READ (1 << MVGBE_PHY_SMI_OPCODE_OFFS)
+#define MVGBE_PHY_SMI_READ_VALID_MASK (1 << 27) /* Read Valid */
+#define MVGBE_PHY_SMI_BUSY_MASK (1 << 28) /* Busy */
+
+/* SDMA command status fields macros */
+/* Tx & Rx descriptors status */
+#define MVGBE_ERROR_SUMMARY 1
+/* Tx & Rx descriptors command */
+#define MVGBE_BUFFER_OWNED_BY_DMA (1 << 31)
+/* Tx descriptors status */
+#define MVGBE_LC_ERROR 0
+#define MVGBE_UR_ERROR (1 << 1)
+#define MVGBE_RL_ERROR (1 << 2)
+#define MVGBE_LLC_SNAP_FORMAT (1 << 9)
+#define MVGBE_TX_LAST_FRAME (1 << 20)
+
+/* Rx descriptors status */
+#define MVGBE_CRC_ERROR 0
+#define MVGBE_OVERRUN_ERROR (1 << 1)
+#define MVGBE_MAX_FRAME_LENGTH_ERROR (1 << 2)
+#define MVGBE_RESOURCE_ERROR ((1 << 2) | (1 << 1))
+#define MVGBE_VLAN_TAGGED (1 << 19)
+#define MVGBE_BPDU_FRAME (1 << 20)
+#define MVGBE_TCP_FRAME_OVER_IP_V_4 0
+#define MVGBE_UDP_FRAME_OVER_IP_V_4 (1 << 21)
+#define MVGBE_OTHER_FRAME_TYPE (1 << 22)
+#define MVGBE_LAYER_2_IS_MVGBE_V_2 (1 << 23)
+#define MVGBE_FRAME_TYPE_IP_V_4 (1 << 24)
+#define MVGBE_FRAME_HEADER_OK (1 << 25)
+#define MVGBE_RX_LAST_DESC (1 << 26)
+#define MVGBE_RX_FIRST_DESC (1 << 27)
+#define MVGBE_UNKNOWN_DESTINATION_ADDR (1 << 28)
+#define MVGBE_RX_EN_INTERRUPT (1 << 29)
+#define MVGBE_LAYER_4_CHECKSUM_OK (1 << 30)
+
+/* Rx descriptors byte count */
+#define MVGBE_FRAME_FRAGMENTED (1 << 2)
+
+/* Tx descriptors command */
+#define MVGBE_LAYER_4_CHECKSUM_FIRST_DESC (1 << 10)
+#define MVGBE_FRAME_SET_TO_VLAN (1 << 15)
+#define MVGBE_TCP_FRAME 0
+#define MVGBE_UDP_FRAME (1 << 16)
+#define MVGBE_GEN_TCP_UDP_CHECKSUM (1 << 17)
+#define MVGBE_GEN_IP_V_4_CHECKSUM (1 << 18)
+#define MVGBE_ZERO_PADDING (1 << 19)
+#define MVGBE_TX_LAST_DESC (1 << 20)
+#define MVGBE_TX_FIRST_DESC (1 << 21)
+#define MVGBE_GEN_CRC (1 << 22)
+#define MVGBE_TX_EN_INTERRUPT (1 << 23)
+#define MVGBE_AUTO_MODE (1 << 30)
+
+/* Address decode parameters */
+/* Ethernet Base Address Register bits */
+#define EBAR_TARGET_DRAM 0x00000000
+#define EBAR_TARGET_DEVICE 0x00000001
+#define EBAR_TARGET_CBS 0x00000002
+#define EBAR_TARGET_PCI0 0x00000003
+#define EBAR_TARGET_PCI1 0x00000004
+#define EBAR_TARGET_CUNIT 0x00000005
+#define EBAR_TARGET_AUNIT 0x00000006
+#define EBAR_TARGET_GUNIT 0x00000007
+
+/* Window attrib */
+#define EBAR_DRAM_CS0 0x00000E00
+#define EBAR_DRAM_CS1 0x00000D00
+#define EBAR_DRAM_CS2 0x00000B00
+#define EBAR_DRAM_CS3 0x00000700
+
+/* DRAM Target interface */
+#define EBAR_DRAM_NO_CACHE_COHERENCY 0x00000000
+#define EBAR_DRAM_CACHE_COHERENCY_WT 0x00001000
+#define EBAR_DRAM_CACHE_COHERENCY_WB 0x00002000
+
+/* Device Bus Target interface */
+#define EBAR_DEVICE_DEVCS0 0x00001E00
+#define EBAR_DEVICE_DEVCS1 0x00001D00
+#define EBAR_DEVICE_DEVCS2 0x00001B00
+#define EBAR_DEVICE_DEVCS3 0x00001700
+#define EBAR_DEVICE_BOOTCS3 0x00000F00
+
+/* PCI Target interface */
+#define EBAR_PCI_BYTE_SWAP 0x00000000
+#define EBAR_PCI_NO_SWAP 0x00000100
+#define EBAR_PCI_BYTE_WORD_SWAP 0x00000200
+#define EBAR_PCI_WORD_SWAP 0x00000300
+#define EBAR_PCI_NO_SNOOP_NOT_ASSERT 0x00000000
+#define EBAR_PCI_NO_SNOOP_ASSERT 0x00000400
+#define EBAR_PCI_IO_SPACE 0x00000000
+#define EBAR_PCI_MEMORY_SPACE 0x00000800
+#define EBAR_PCI_REQ64_FORCE 0x00000000
+#define EBAR_PCI_REQ64_SIZE 0x00001000
+
+/* Window access control */
+#define EWIN_ACCESS_NOT_ALLOWED 0
+#define EWIN_ACCESS_READ_ONLY 1
+#define EWIN_ACCESS_FULL ((1 << 1) | 1)
+
+/* structures represents Controller registers */
+struct mvgbe_barsz {
+ u32 bar;
+ u32 size;
+};
+
+struct mvgbe_rxcdp {
+ struct mvgbe_rxdesc *rxcdp;
+ u32 rxcdp_pad[3];
+};
+
+struct mvgbe_tqx {
+ u32 qxttbc;
+ u32 tqxtbc;
+ u32 tqxac;
+ u32 tqxpad;
+};
+
+struct mvgbe_registers {
+ u32 phyadr;
+ u32 smi;
+ u32 euda;
+ u32 eudid;
+ u8 pad1[0x080 - 0x00c - 4];
+ u32 euic;
+ u32 euim;
+ u8 pad2[0x094 - 0x084 - 4];
+ u32 euea;
+ u32 euiae;
+ u8 pad3[0x0b0 - 0x098 - 4];
+ u32 euc;
+ u8 pad3a[0x200 - 0x0b0 - 4];
+ struct mvgbe_barsz barsz[6];
+ u8 pad4[0x280 - 0x22c - 4];
+ u32 ha_remap[4];
+ u32 bare;
+ u32 epap;
+ u8 pad5[0x400 - 0x294 - 4];
+ u32 pxc;
+ u32 pxcx;
+ u32 mii_ser_params;
+ u8 pad6[0x410 - 0x408 - 4];
+ u32 evlane;
+ u32 macal;
+ u32 macah;
+ u32 sdc;
+ u32 dscp[7];
+ u32 psc0;
+ u32 vpt2p;
+ u32 ps0;
+ u32 tqc;
+ u32 psc1;
+ u32 ps1;
+ u32 mrvl_header;
+ u8 pad7[0x460 - 0x454 - 4];
+ u32 ic;
+ u32 ice;
+ u32 pim;
+ u32 peim;
+ u8 pad8[0x474 - 0x46c - 4];
+ u32 pxtfut;
+ u32 pad9;
+ u32 pxmfs;
+ u32 pad10;
+ u32 pxdfc;
+ u32 pxofc;
+ u8 pad11[0x494 - 0x488 - 4];
+ u32 peuiae;
+ u8 pad12[0x4bc - 0x494 - 4];
+ u32 eth_type_prio;
+ u8 pad13[0x4dc - 0x4bc - 4];
+ u32 tqfpc;
+ u32 pttbrc;
+ u32 tqc1;
+ u32 pmtu;
+ u32 pmtbs;
+ u8 pad14[0x60c - 0x4ec - 4];
+ struct mvgbe_rxcdp rxcdp[7];
+ struct mvgbe_rxdesc *rxcdp7;
+ u32 rqc;
+ struct mvgbe_txdesc *tcsdp;
+ u8 pad15[0x6c0 - 0x684 - 4];
+ struct mvgbe_txdesc *tcqdp[8];
+ u8 pad16[0x700 - 0x6dc - 4];
+ struct mvgbe_tqx tqx[8];
+ u32 pttbc;
+ u8 pad17[0x7a8 - 0x780 - 4];
+ u32 tqxipg0;
+ u32 pad18[3];
+ u32 tqxipg1;
+ u8 pad19[0x7c0 - 0x7b8 - 4];
+ u32 hitkninlopkt;
+ u32 hitkninasyncpkt;
+ u32 lotkninasyncpkt;
+ u32 pad20;
+ u32 ts;
+ u8 pad21[0x3000 - 0x27d0 - 4];
+ u32 pad20_1[32]; /* mib counter registes */
+ u8 pad22[0x3400 - 0x3000 - sizeof(u32) * 32];
+ u32 dfsmt[64];
+ u32 dfomt[64];
+ u32 dfut[4];
+ u8 pad23[0xe20c0 - 0x7360c - 4];
+ u32 pmbus_top_arbiter;
+};
+
+/* structures/enums needed by driver */
+enum mvgbe_adrwin {
+ MVGBE_WIN0,
+ MVGBE_WIN1,
+ MVGBE_WIN2,
+ MVGBE_WIN3,
+ MVGBE_WIN4,
+ MVGBE_WIN5
+};
+
+enum mvgbe_target {
+ MVGBE_TARGET_DRAM,
+ MVGBE_TARGET_DEV,
+ MVGBE_TARGET_CBS,
+ MVGBE_TARGET_PCI0,
+ MVGBE_TARGET_PCI1
+};
+
+struct mvgbe_winparam {
+ enum mvgbe_adrwin win; /* Window number */
+ enum mvgbe_target target; /* System targets */
+ u16 attrib; /* BAR attrib. See above macros */
+ u32 base_addr; /* Window base address in u32 form */
+ u32 high_addr; /* Window high address in u32 form */
+ u32 size; /* Size in MBytes. Must be % 64Kbyte. */
+ int enable; /* Enable/disable access to the window. */
+ u16 access_ctrl; /*Access ctrl register. see above macros */
+};
+
+struct mvgbe_rxdesc {
+ u32 cmd_sts; /* Descriptor command status */
+ u16 buf_size; /* Buffer size */
+ u16 byte_cnt; /* Descriptor buffer byte count */
+ u8 *buf_ptr; /* Descriptor buffer pointer */
+ struct mvgbe_rxdesc *nxtdesc_p; /* Next descriptor pointer */
+};
+
+struct mvgbe_txdesc {
+ u32 cmd_sts; /* Descriptor command status */
+ u16 l4i_chk; /* CPU provided TCP Checksum */
+ u16 byte_cnt; /* Descriptor buffer byte count */
+ u8 *buf_ptr; /* Descriptor buffer ptr */
+ struct mvgbe_txdesc *nxtdesc_p; /* Next descriptor ptr */
+};
+
+/* port device data struct */
+struct mvgbe_device {
+ struct eth_device dev;
+ struct mvgbe_registers *regs;
+ struct mvgbe_txdesc *p_txdesc;
+ struct mvgbe_rxdesc *p_rxdesc;
+ struct mvgbe_rxdesc *p_rxdesc_curr;
+ u8 *p_rxbuf;
+ u8 *p_aligned_txbuf;
+};
+
+#endif /* __MVGBE_H__ */
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 5fa6f61..54c4a70 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -95,14 +95,23 @@
#endif
};
+/*
+ * Initialize all the TSEC devices
+ *
+ * Returns the number of TSEC devices that were initialized
+ */
int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
{
int i;
+ int ret, count = 0;
- for (i = 0; i < num; i++)
- tsec_initialize(bis, &tsecs[i]);
+ for (i = 0; i < num; i++) {
+ ret = tsec_initialize(bis, &tsecs[i]);
+ if (ret > 0)
+ count += ret;
+ }
- return 0;
+ return count;
}
int tsec_standard_init(bd_t *bis)
@@ -1631,6 +1640,27 @@
},
};
+/* micrel KSZ804 */
+static struct phy_info phy_info_ksz804 = {
+ 0x0022151,
+ "Micrel KSZ804 PHY",
+ 4,
+ (struct phy_cmd[]) { /* config */
+ {PHY_BMCR, PHY_BMCR_RESET, NULL},
+ {PHY_BMCR, PHY_BMCR_AUTON|PHY_BMCR_RST_NEG, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ {PHY_BMSR, miim_read, NULL},
+ {PHY_BMSR, miim_read, &mii_parse_sr},
+ {PHY_BMSR, miim_read, &mii_parse_link},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ }
+};
+
/* a generic flavor. */
static struct phy_info phy_info_generic = {
0,
@@ -1794,6 +1824,7 @@
&phy_info_M88E1145,
&phy_info_M88E1149S,
&phy_info_dm9161,
+ &phy_info_ksz804,
&phy_info_lxt971,
&phy_info_VSC8211,
&phy_info_VSC8244,
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index 9477851..56eee7b 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -225,7 +225,7 @@
iobase &= ~0xf;
dev = (struct eth_device *)malloc(sizeof *dev);
- sprintf(dev->name, "uli526x#%d\n", card_number);
+ sprintf(dev->name, "uli526x#%d", card_number);
db = (struct uli526x_board_info *)
malloc(sizeof(struct uli526x_board_info));
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index f28d42b..e0ad029 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -13,6 +13,8 @@
#include <spi.h>
#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <asm/mach-common/bits/spi.h>
struct bfin_spi_slave {
@@ -33,54 +35,110 @@
#define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave)
-__attribute__((weak))
+#define MAX_CTRL_CS 7
+
+#define gpio_cs(cs) ((cs) - MAX_CTRL_CS)
+#ifdef CONFIG_BFIN_SPI_GPIO_CS
+# define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS)
+#else
+# define is_gpio_cs(cs) 0
+#endif
+
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
-#if defined(__ADSPBF538__) || defined(__ADSPBF539__)
- /* The SPI1/SPI2 buses are weird ... only 1 CS */
- if (bus > 0 && cs != 1)
- return 0;
-#endif
- return (cs >= 1 && cs <= 7);
+ if (is_gpio_cs(cs))
+ return gpio_is_valid(gpio_cs(cs));
+ else
+ return (cs >= 1 && cs <= MAX_CTRL_CS);
}
-__attribute__((weak))
void spi_cs_activate(struct spi_slave *slave)
{
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
- write_SPI_FLG(bss,
- (read_SPI_FLG(bss) &
- ~((!bss->flg << 8) << slave->cs)) |
- (1 << slave->cs));
+
+ if (is_gpio_cs(slave->cs)) {
+ unsigned int cs = gpio_cs(slave->cs);
+ gpio_set_value(cs, bss->flg);
+ debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs));
+ } else {
+ write_SPI_FLG(bss,
+ (read_SPI_FLG(bss) &
+ ~((!bss->flg << 8) << slave->cs)) |
+ (1 << slave->cs));
+ debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
+ }
+
SSYNC();
- debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
}
-__attribute__((weak))
void spi_cs_deactivate(struct spi_slave *slave)
{
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
- u16 flg;
- /* make sure we force the cs to deassert rather than let the
- * pin float back up. otherwise, exact timings may not be
- * met some of the time leading to random behavior (ugh).
- */
- flg = read_SPI_FLG(bss) | ((!bss->flg << 8) << slave->cs);
- write_SPI_FLG(bss, flg);
- SSYNC();
- debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
+ if (is_gpio_cs(slave->cs)) {
+ unsigned int cs = gpio_cs(slave->cs);
+ gpio_set_value(cs, !bss->flg);
+ debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs));
+ } else {
+ u16 flg;
- flg &= ~(1 << slave->cs);
- write_SPI_FLG(bss, flg);
+ /* make sure we force the cs to deassert rather than let the
+ * pin float back up. otherwise, exact timings may not be
+ * met some of the time leading to random behavior (ugh).
+ */
+ flg = read_SPI_FLG(bss) | ((!bss->flg << 8) << slave->cs);
+ write_SPI_FLG(bss, flg);
+ SSYNC();
+ debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
+
+ flg &= ~(1 << slave->cs);
+ write_SPI_FLG(bss, flg);
+ debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
+ }
+
SSYNC();
- debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
}
void spi_init()
{
}
+#ifdef SPI_CTL
+# define SPI0_CTL SPI_CTL
+#endif
+
+#define SPI_PINS(n) \
+ [n] = { 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 }
+static unsigned short pins[][5] = {
+#ifdef SPI0_CTL
+ SPI_PINS(0),
+#endif
+#ifdef SPI1_CTL
+ SPI_PINS(1),
+#endif
+#ifdef SPI2_CTL
+ SPI_PINS(2),
+#endif
+};
+
+#define SPI_CS_PINS(n) \
+ [n] = { \
+ P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \
+ P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \
+ P_SPI##n##_SSEL7, \
+ }
+static const unsigned short cs_pins[][7] = {
+#ifdef SPI0_CTL
+ SPI_CS_PINS(0),
+#endif
+#ifdef SPI1_CTL
+ SPI_CS_PINS(1),
+#endif
+#ifdef SPI2_CTL
+ SPI_CS_PINS(2),
+#endif
+};
+
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
@@ -92,11 +150,14 @@
if (!spi_cs_is_valid(bus, cs))
return NULL;
+ if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) {
+ debug("%s: invalid bus %u\n", __func__, bus);
+ return NULL;
+ }
switch (bus) {
-#ifdef SPI_CTL
-# define SPI0_CTL SPI_CTL
-#endif
+#ifdef SPI0_CTL
case 0: mmr_base = SPI0_CTL; break;
+#endif
#ifdef SPI1_CTL
case 1: mmr_base = SPI1_CTL; break;
#endif
@@ -142,168 +203,21 @@
free(bss);
}
-static void spi_portmux(struct spi_slave *slave)
-{
-#if defined(__ADSPBF51x__)
-#define SET_MUX(port, mux, func) port##_mux = ((port##_mux & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_##func)
- u16 f_mux = bfin_read_PORTF_MUX();
- u16 f_fer = bfin_read_PORTF_FER();
- u16 g_mux = bfin_read_PORTG_MUX();
- u16 g_fer = bfin_read_PORTG_FER();
- u16 h_mux = bfin_read_PORTH_MUX();
- u16 h_fer = bfin_read_PORTH_FER();
- switch (slave->bus) {
- case 0:
- /* set SCK/MISO/MOSI */
- SET_MUX(g, 7, 1);
- g_fer |= PG12 | PG13 | PG14;
- switch (slave->cs) {
- case 1: SET_MUX(f, 2, 1); f_fer |= PF7; break;
- case 2: /* see G above */ g_fer |= PG15; break;
- case 3: SET_MUX(h, 1, 3); f_fer |= PH4; break;
- case 4: /* no muxing */ h_fer |= PH8; break;
- case 5: SET_MUX(g, 1, 3); h_fer |= PG3; break;
- case 6: /* no muxing */ break;
- case 7: /* no muxing */ break;
- }
- case 1:
- /* set SCK/MISO/MOSI */
- SET_MUX(h, 0, 2);
- h_fer |= PH1 | PH2 | PH3;
- switch (slave->cs) {
- case 1: SET_MUX(h, 2, 3); h_fer |= PH6; break;
- case 2: SET_MUX(f, 0, 3); f_fer |= PF0; break;
- case 3: SET_MUX(g, 0, 3); g_fer |= PG0; break;
- case 4: SET_MUX(f, 3, 3); f_fer |= PF8; break;
- case 5: SET_MUX(g, 6, 3); h_fer |= PG11; break;
- case 6: /* no muxing */ break;
- case 7: /* no muxing */ break;
- }
- }
- bfin_write_PORTF_MUX(f_mux);
- bfin_write_PORTF_FER(f_fer);
- bfin_write_PORTG_MUX(g_mux);
- bfin_write_PORTG_FER(g_fer);
- bfin_write_PORTH_MUX(h_mux);
- bfin_write_PORTH_FER(h_fer);
-#elif defined(__ADSPBF52x__)
-#define SET_MUX(port, mux, func) port##_mux = ((port##_mux & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_##func)
- u16 f_mux = bfin_read_PORTF_MUX();
- u16 f_fer = bfin_read_PORTF_FER();
- u16 g_mux = bfin_read_PORTG_MUX();
- u16 g_fer = bfin_read_PORTG_FER();
- u16 h_mux = bfin_read_PORTH_MUX();
- u16 h_fer = bfin_read_PORTH_FER();
- /* set SCK/MISO/MOSI */
- SET_MUX(g, 0, 3);
- g_fer |= PG2 | PG3 | PG4;
- switch (slave->cs) {
- case 1: /* see G above */ g_fer |= PG1; break;
- case 2: SET_MUX(f, 4, 3); f_fer |= PF12; break;
- case 3: SET_MUX(f, 4, 3); f_fer |= PF13; break;
- case 4: SET_MUX(h, 1, 1); h_fer |= PH8; break;
- case 5: SET_MUX(h, 2, 1); h_fer |= PH9; break;
- case 6: SET_MUX(f, 1, 3); f_fer |= PF9; break;
- case 7: SET_MUX(f, 2, 3); f_fer |= PF10; break;
- }
- bfin_write_PORTF_MUX(f_mux);
- bfin_write_PORTF_FER(f_fer);
- bfin_write_PORTG_MUX(g_mux);
- bfin_write_PORTG_FER(g_fer);
- bfin_write_PORTH_MUX(h_mux);
- bfin_write_PORTH_FER(h_fer);
-#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
- u16 mux = bfin_read_PORT_MUX();
- u16 f_fer = bfin_read_PORTF_FER();
- /* set SCK/MISO/MOSI */
- f_fer |= PF11 | PF12 | PF13;
- switch (slave->cs) {
- case 1: f_fer |= PF10; break;
- case 2: mux |= PJSE; break;
- case 3: mux |= PJSE; break;
- case 4: mux |= PFS4E; f_fer |= PF6; break;
- case 5: mux |= PFS5E; f_fer |= PF5; break;
- case 6: mux |= PFS6E; f_fer |= PF4; break;
- case 7: mux |= PJCE_SPI; break;
- }
- bfin_write_PORT_MUX(mux);
- bfin_write_PORTF_FER(f_fer);
-#elif defined(__ADSPBF538__) || defined(__ADSPBF539__)
- u16 fer, pins;
- if (slave->bus == 1)
- pins = PD0 | PD1 | PD2 | (slave->cs == 1 ? PD4 : 0);
- else if (slave->bus == 2)
- pins = PD5 | PD6 | PD7 | (slave->cs == 1 ? PD9 : 0);
- else
- pins = 0;
- if (pins) {
- fer = bfin_read_PORTDIO_FER();
- fer &= ~pins;
- bfin_write_PORTDIO_FER(fer);
- }
-#elif defined(__ADSPBF54x__)
-#define DO_MUX(port, pin) \
- mux = ((mux & ~PORT_x_MUX_##pin##_MASK) | PORT_x_MUX_##pin##_FUNC_1); \
- fer |= P##port##pin;
- u32 mux;
- u16 fer;
- switch (slave->bus) {
- case 0:
- mux = bfin_read_PORTE_MUX();
- fer = bfin_read_PORTE_FER();
- /* set SCK/MISO/MOSI */
- DO_MUX(E, 0);
- DO_MUX(E, 1);
- DO_MUX(E, 2);
- switch (slave->cs) {
- case 1: DO_MUX(E, 4); break;
- case 2: DO_MUX(E, 5); break;
- case 3: DO_MUX(E, 6); break;
- }
- bfin_write_PORTE_MUX(mux);
- bfin_write_PORTE_FER(fer);
- break;
- case 1:
- mux = bfin_read_PORTG_MUX();
- fer = bfin_read_PORTG_FER();
- /* set SCK/MISO/MOSI */
- DO_MUX(G, 8);
- DO_MUX(G, 9);
- DO_MUX(G, 10);
- switch (slave->cs) {
- case 1: DO_MUX(G, 5); break;
- case 2: DO_MUX(G, 6); break;
- case 3: DO_MUX(G, 7); break;
- }
- bfin_write_PORTG_MUX(mux);
- bfin_write_PORTG_FER(fer);
- break;
- case 2:
- mux = bfin_read_PORTB_MUX();
- fer = bfin_read_PORTB_FER();
- /* set SCK/MISO/MOSI */
- DO_MUX(B, 12);
- DO_MUX(B, 13);
- DO_MUX(B, 14);
- switch (slave->cs) {
- case 1: DO_MUX(B, 9); break;
- case 2: DO_MUX(B, 10); break;
- case 3: DO_MUX(B, 11); break;
- }
- bfin_write_PORTB_MUX(mux);
- bfin_write_PORTB_FER(fer);
- break;
- }
-#endif
-}
-
int spi_claim_bus(struct spi_slave *slave)
{
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
- spi_portmux(slave);
+ if (is_gpio_cs(slave->cs)) {
+ unsigned int cs = gpio_cs(slave->cs);
+ gpio_request(cs, "bfin-spi");
+ gpio_direction_output(cs, !bss->flg);
+ pins[slave->bus][0] = P_DONTCARE;
+ } else
+ pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1];
+ peripheral_request_list(pins[slave->bus], "bfin-spi");
+
write_SPI_CTL(bss, bss->ctl);
write_SPI_BAUD(bss, bss->baud);
SSYNC();
@@ -314,7 +228,13 @@
void spi_release_bus(struct spi_slave *slave)
{
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+
debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
+
+ peripheral_free_list(pins[slave->bus]);
+ if (is_gpio_cs(slave->cs))
+ gpio_free(gpio_cs(slave->cs));
+
write_SPI_CTL(bss, 0);
SSYNC();
}
diff --git a/examples/standalone/smc911x_eeprom.c b/examples/standalone/smc911x_eeprom.c
index c51a050..00e8266 100644
--- a/examples/standalone/smc911x_eeprom.c
+++ b/examples/standalone/smc911x_eeprom.c
@@ -240,7 +240,7 @@
static int smc911x_init(struct eth_device *dev)
{
/* See if there is anything there */
- if (!smc911x_detect_chip(dev))
+ if (smc911x_detect_chip(dev))
return 1;
smc911x_reset(dev);
diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h
deleted file mode 100644
index 3920d35..0000000
--- a/include/configs/EP1C20.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*------------------------------------------------------------------------
- * BOARD/CPU
- *----------------------------------------------------------------------*/
-#define CONFIG_EP1C20 1 /* EP1C20 board */
-#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
-
-#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */
-#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
-#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * CACHE -- the following will support II/s and II/f. The II/s does not
- * have dcache, so the cache instructions will behave as NOPs.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */
-#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */
-#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
-#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
-
-/*------------------------------------------------------------------------
- * MEMORY BASE ADDRESSES
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */
-#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
-#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */
-#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */
-#define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */
-#define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION
- * -Monitor at top.
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 128k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#define CONFIG_ALTERA_UART 1 /* Use altera uart */
-#if defined(CONFIG_ALTERA_JTAG_UART)
-#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
-#else
-#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
-#endif
-
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
-#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
-
-/*------------------------------------------------------------------------
- * EPCS Device -- wne CONFIG_SYS_NIOS_EPCSBASE is defined code/commands for
- * epcs device access is enabled. The base address is the epcs
- * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
- * The register base is currently at offset 0x600 from the memory base.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_NIOS_EPCSBASE 0x02100200 /* EPCS register base */
-
-/*------------------------------------------------------------------------
- * DEBUG
- *----------------------------------------------------------------------*/
-#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
-
-/*------------------------------------------------------------------------
- * TIMEBASE --
- *
- * The high res timer defaults to 1 msec. Since it includes the period
- * registers, the interrupt frequency can be reduced using TMRCNT.
- * If the default period is acceptable, TMRCNT can be left undefined.
- * TMRMS represents the desired mecs per tick (msecs per interrupt).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ 1000 /* Always 1000 */
-#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
-#define CONFIG_SYS_NIOS_TMRCNT \
- (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-
-/*------------------------------------------------------------------------
- * STATUS LED -- Provides a simple blinking led. For Nios2 each board
- * must implement its own led routines -- leds are, after all,
- * board-specific, no?
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */
-#define CONFIG_STATUS_LED /* Enable status driver */
-
-#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
-#define STATUS_LED_STATE 1 /* Blinking */
-#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */
-
-/*------------------------------------------------------------------------
- * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
- * and really doesn't need any additional clutter. So I choose the lazy
- * way out to avoid changes there -- define the base address to ensure
- * cache bypass so there's no need to monkey with inx/outx macros.
- *----------------------------------------------------------------------*/
-#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */
-
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.2.21
-#define CONFIG_SERVERIP 192.168.2.16
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#undef CONFIG_CMD_BOOTD
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_XIMG
-
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* Provide extended help*/
-#define CONFIG_SYS_PROMPT "==> " /* Command prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
-#define CONFIG_SYS_MAXARGS 16 /* Max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h
deleted file mode 100644
index bfbf8c1..0000000
--- a/include/configs/EP1S10.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*------------------------------------------------------------------------
- * BOARD/CPU
- *----------------------------------------------------------------------*/
-#define CONFIG_EP1S10 1 /* EP1S10 board */
-#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
-
-#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */
-#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
-#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */
-
-/*------------------------------------------------------------------------
- * CACHE -- the following will support II/s and II/f. The II/s does not
- * have dcache, so the cache instructions will behave as NOPs.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */
-#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */
-#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
-#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
-
-/*------------------------------------------------------------------------
- * MEMORY BASE ADDRESSES
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */
-#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
-#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */
-#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */
-#define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */
-#define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB */
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION
- * -Monitor at top.
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) /* 256k heap */
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom
- * of flash memory. This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#define CONFIG_ALTERA_UART 1 /* Use altera uart */
-#if defined(CONFIG_ALTERA_JTAG_UART)
-#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
-#else
-#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
-#endif
-
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
-#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
-
-/*------------------------------------------------------------------------
- * EPCS Device -- None for stratix.
- *----------------------------------------------------------------------*/
-#undef CONFIG_SYS_NIOS_EPCSBASE
-
-/*------------------------------------------------------------------------
- * DEBUG
- *----------------------------------------------------------------------*/
-#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
-
-/*------------------------------------------------------------------------
- * TIMEBASE --
- *
- * The high res timer defaults to 1 msec. Since it includes the period
- * registers, the interrupt frequency can be reduced using TMRCNT.
- * If the default period is acceptable, TMRCNT can be left undefined.
- * TMRMS represents the desired mecs per tick (msecs per interrupt).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ 1000 /* Always 1000 */
-#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
-#define CONFIG_SYS_NIOS_TMRCNT \
- (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-
-/*------------------------------------------------------------------------
- * STATUS LED -- Provides a simple blinking led. For Nios2 each board
- * must implement its own led routines -- since leds are board-specific.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */
-#define CONFIG_STATUS_LED /* Enable status driver */
-
-#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
-#define STATUS_LED_STATE 1 /* Blinking */
-#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */
-
-/*------------------------------------------------------------------------
- * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
- * and really doesn't need any additional clutter. So I choose the lazy
- * way out to avoid changes there -- define the base address to ensure
- * cache bypass so there's no need to monkey with inx/outx macros.
- *----------------------------------------------------------------------*/
-#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */
-
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.2.21
-#define CONFIG_SERVERIP 192.168.2.16
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVES
-
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* Provide extended help*/
-#define CONFIG_SYS_PROMPT "==> " /* Command prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
-#define CONFIG_SYS_MAXARGS 16 /* Max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h
deleted file mode 100644
index 4d905fe..0000000
--- a/include/configs/EP1S40.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*------------------------------------------------------------------------
- * BOARD/CPU
- *----------------------------------------------------------------------*/
-#define CONFIG_EP1S40 1 /* EP1S40 board */
-#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
-
-#define CONFIG_SYS_RESET_ADDR 0x00000000 /* Hard-reset address */
-#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
-#define CONFIG_SYS_NIOS_SYSID_BASE 0x021208b8 /* System id address */
-
-/*------------------------------------------------------------------------
- * CACHE -- the following will support II/s and II/f. The II/s does not
- * have dcache, so the cache instructions will behave as NOPs.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_ICACHE_SIZE 4096 /* 4 KByte total */
-#define CONFIG_SYS_ICACHELINE_SIZE 32 /* 32 bytes/line */
-#define CONFIG_SYS_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
-#define CONFIG_SYS_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
-
-/*------------------------------------------------------------------------
- * MEMORY BASE ADDRESSES
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* FLASH base addr */
-#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
-#define CONFIG_SYS_SDRAM_BASE 0x01000000 /* SDRAM base addr */
-#define CONFIG_SYS_SDRAM_SIZE 0x01000000 /* 16 MByte */
-#define CONFIG_SYS_SRAM_BASE 0x02000000 /* SRAM base addr */
-#define CONFIG_SYS_SRAM_SIZE 0x00100000 /* 1 MB */
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION
- * -Monitor at top.
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) /* 256k heap */
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom
- * of flash memory. This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#define CONFIG_ALTERA_UART 1 /* Use altera uart */
-#if defined(CONFIG_ALTERA_JTAG_UART)
-#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
-#else
-#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
-#endif
-
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
-#define CONFIG_SYS_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
-
-/*------------------------------------------------------------------------
- * EPCS Device -- None for stratix.
- *----------------------------------------------------------------------*/
-#undef CONFIG_SYS_NIOS_EPCSBASE
-
-/*------------------------------------------------------------------------
- * DEBUG
- *----------------------------------------------------------------------*/
-#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
-
-/*------------------------------------------------------------------------
- * TIMEBASE --
- *
- * The high res timer defaults to 1 msec. Since it includes the period
- * registers, the interrupt frequency can be reduced using TMRCNT.
- * If the default period is acceptable, TMRCNT can be left undefined.
- * TMRMS represents the desired mecs per tick (msecs per interrupt).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ 1000 /* Always 1000 */
-#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec) */
-#define CONFIG_SYS_NIOS_TMRCNT \
- (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-
-/*------------------------------------------------------------------------
- * STATUS LED -- Provides a simple blinking led. For Nios2 each board
- * must implement its own led routines -- since leds are board-specific.
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */
-#define CONFIG_STATUS_LED /* Enable status driver */
-
-#define STATUS_LED_BIT 1 /* Bit-0 on PIO */
-#define STATUS_LED_STATE 1 /* Blinking */
-#define STATUS_LED_PERIOD (500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec */
-
-/*------------------------------------------------------------------------
- * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
- * and really doesn't need any additional clutter. So I choose the lazy
- * way out to avoid changes there -- define the base address to ensure
- * cache bypass so there's no need to monkey with inx/outx macros.
- *----------------------------------------------------------------------*/
-#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */
-
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.2.21
-#define CONFIG_SERVERIP 192.168.2.16
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVES
-
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* Provide extended help*/
-#define CONFIG_SYS_PROMPT "==> " /* Command prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
-#define CONFIG_SYS_MAXARGS 16 /* Max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* Default load address */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* Start addr for test */
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_INIT_SP - 0x00020000
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
new file mode 100644
index 0000000..6cd5da7
--- /dev/null
+++ b/include/configs/MPC8308RDB.h
@@ -0,0 +1,560 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_MPC83xx 1 /* MPC83xx family */
+#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */
+#define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * On-board devices
+ *
+ * TSEC1 is SoC TSEC
+ * TSEC2 is VSC switch
+ */
+#define CONFIG_TSEC1
+#define CONFIG_VSC7385_ENET
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66.66MHz, then
+ * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz
+ * We choose the A type silicon as default, so the core is 400Mhz.
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_2X1 |\
+ HRCWL_SVCOD_DIV_2 |\
+ HRCWL_CSB_TO_CLKIN_4X1 |\
+ HRCWL_CORE_TO_CSB_3X1)
+/*
+ * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits
+ * in 8308's HRCWH according to the manual, but original Freescale's
+ * code has them and I've expirienced some problems using the board
+ * with BDI3000 attached when I've tried to set these bits to zero
+ * (UART doesn't work after the 'reset run' command).
+ */
+#define CONFIG_SYS_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN)
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRH 0x01b7d103
+#define CONFIG_SYS_SICRL 0x00000040 /* 3.3V, no delay */
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CONFIG_SYS_IMMR 0xE0000000
+
+/*
+ * SERDES
+ */
+#define CONFIG_FSL_SERDES
+#define CONFIG_FSL_SERDES1 0xe3000
+
+/*
+ * Arbiter Setup
+ */
+#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
+#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */
+#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
+ | DDRCDR_PZ_LOZ \
+ | DDRCDR_NZ_LOZ \
+ | DDRCDR_ODT \
+ | DDRCDR_Q_DRN)
+ /* 0x7b880001 */
+/*
+ * Manually set up DDR parameters
+ * consist of two chips HY5PS12621BFP-C4 from HYNIX
+ */
+
+#define CONFIG_SYS_DDR_SIZE 128 /* MB */
+
+#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
+#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
+ | 0x00010000 /* ODT_WR to CSn */ \
+ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+ /* 0x80010102 */
+#define CONFIG_SYS_DDR_TIMING_3 0x00000000
+#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
+ | (0 << TIMING_CFG0_WRT_SHIFT) \
+ | (0 << TIMING_CFG0_RRT_SHIFT) \
+ | (0 << TIMING_CFG0_WWT_SHIFT) \
+ | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
+ | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
+ | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
+ | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
+ /* 0x00220802 */
+#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
+ | (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \
+ | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
+ | (5 << TIMING_CFG1_CASLAT_SHIFT) \
+ | (6 << TIMING_CFG1_REFREC_SHIFT) \
+ | (2 << TIMING_CFG1_WRREC_SHIFT) \
+ | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
+ | (2 << TIMING_CFG1_WRTORD_SHIFT))
+ /* 0x27256222 */
+#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
+ | (4 << TIMING_CFG2_CPO_SHIFT) \
+ | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
+ | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
+ | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
+ | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
+ | (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
+ /* 0x121048c5 */
+#define CONFIG_SYS_DDR_INTERVAL ((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \
+ | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
+ /* 0x03600100 */
+#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
+ | SDRAM_CFG_SDRAM_TYPE_DDR2 \
+ | SDRAM_CFG_32_BE)
+ /* 0x43080000 */
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */
+#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
+ | (0x0232 << SDRAM_MODE_SD_SHIFT))
+ /* ODT 150ohm CL=3, AL=1 on SDRAM */
+#define CONFIG_SYS_DDR_MODE2 0x00000000
+
+/*
+ * Memory test
+ */
+#define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END 0x07f00000
+
+/*
+ * The reserved memory
+ */
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK 1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
+#define CONFIG_SYS_LBC_LBCR 0x00040000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
+#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
+
+/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */
+
+#define CONFIG_SYS_BR0_PRELIM (\
+ CONFIG_SYS_FLASH_BASE /* Flash Base address */ |\
+ (2 << BR_PS_SHIFT) /* 16 bit port size */ |\
+ BR_V) /* valid */
+#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
+ | OR_UPM_XAM \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_ACS_DIV2 \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_15 \
+ | OR_GPCM_TRLX \
+ | OR_GPCM_EHTR \
+ | OR_GPCM_EAD)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+/* 127 64KB sectors and 8 8KB top sectors per device */
+#define CONFIG_SYS_MAX_FLASH_SECT 135
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
+#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V ) /* valid */
+#define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR )
+ /* 0xFFFF8396 */
+
+#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+
+#ifdef CONFIG_VSC7385_ENET
+#define CONFIG_TSEC2
+#define CONFIG_SYS_VSC7385_BASE 0xF0000000
+#define CONFIG_SYS_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */
+#define CONFIG_SYS_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/
+/* Access window base at VSC7385 base */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE
+/* Access window size 128K */
+#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010
+/* The flash address and size of the VSC7385 firmware image */
+#define CONFIG_VSC7385_IMAGE 0xFE7FE000
+#define CONFIG_VSC7385_IMAGE_SIZE 8192
+#endif
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_NOPROBES {{0x51}} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+
+
+/*
+ * Board info - revision and where boot from
+ */
+#define CONFIG_SYS_I2C_PCF8574A_ADDR 0x39
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1337 /* ds1339 on board, use ds1337 rtc via i2c */
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_SYS_PCIE1_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000
+#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000
+#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000
+#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000
+
+/*
+ * Fake PCIE2 definitions: there is no PCIE2 on this board but the code
+ * in arch/powerpc/cpu/mpc83xx/pcie.c doesn't compile without this
+ */
+#define CONFIG_SYS_PCIE2_BASE 0xC0000000
+#define CONFIG_SYS_PCIE2_MEM_BASE 0xC0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC0000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000
+#define CONFIG_SYS_PCIE2_CFG_BASE 0xD0000000
+#define CONFIG_SYS_PCIE2_CFG_SIZE 0x01000000
+#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xD1000000
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000
+
+#define CONFIG_PCI
+#define CONFIG_PCIE
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
+
+/*
+ * TSEC
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET 0x25000
+#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#define TSEC1_PHY_ADDR 2
+#define TSEC2_PHY_ADDR 1
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC1_FLAGS TSEC_GIGABIT
+#define TSEC2_FLAGS TSEC_GIGABIT
+
+/* Options are: eTSEC[0-1] */
+#define CONFIG_ETHPRIME "eTSEC0"
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CONFIG_SYS_HID0_INIT 0x000000000
+#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_INSTRUCTION_CACHE | \
+ HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+#define CONFIG_SYS_HID2 HID2_HBE
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \
+ BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | \
+ BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
+
+#define xstr(s) str(s)
+#define str(s) #s
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs}" \
+ " console=${consoledev},${baudrate}\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addmisc=setenv bootargs ${bootargs}\0" \
+ "kernel_addr=FE080000\0" \
+ "fdt_addr=FE280000\0" \
+ "ramdisk_addr=FE290000\0" \
+ "u-boot=mpc8308rdb/u-boot.bin\0" \
+ "kernel_addr_r=1000000\0" \
+ "fdt_addr_r=C00000\0" \
+ "hostname=mpc8308rdb\0" \
+ "bootfile=mpc8308rdb/uImage\0" \
+ "fdtfile=mpc8308rdb/mpc8308rdb.dtb\0" \
+ "rootpath=/opt/eldk-4.2/ppc_6xx\0" \
+ "flash_self=run ramargs addip addtty addmtd addmisc;" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
+ "tftp ${fdt_addr_r} ${fdtfile};" \
+ "run nfsargs addip addtty addmtd addmisc;" \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "bootcmd=run flash_self\0" \
+ "load=tftp ${loadaddr} ${u-boot}\0" \
+ "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};cp.b ${fileaddr} " \
+ xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ "upd=run load update\0" \
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h
index 1e821d9..6eec1c9 100644
--- a/include/configs/bf518f-ezbrd.h
+++ b/include/configs/bf518f-ezbrd.h
@@ -63,6 +63,26 @@
#if !defined(__ADSPBF512__) && !defined(__ADSPBF514__)
#define ADI_CMDS_NETWORK 1
#define CONFIG_BFIN_MAC
+#define CONFIG_BFIN_MAC_PINS \
+ { \
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxD2, \
+ P_MII0_ETxD3, \
+ P_MII0_ETxEN, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_COL, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxD2, \
+ P_MII0_ERxD3, \
+ P_MII0_ERxDV, \
+ P_MII0_ERxCLK, \
+ P_MII0_CRS, \
+ P_MII0_MDC, \
+ P_MII0_MDIO, \
+ 0 }
#define CONFIG_NETCONSOLE 1
#define CONFIG_NET_MULTI 1
#endif
@@ -117,8 +137,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h
index 711fa27..82396d0 100644
--- a/include/configs/bf526-ezbrd.h
+++ b/include/configs/bf526-ezbrd.h
@@ -134,8 +134,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
@@ -160,23 +158,19 @@
/* define to enable run status via led */
/* #define CONFIG_STATUS_LED */
#ifdef CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
-#ifndef __ASSEMBLY__
-typedef unsigned int led_id_t;
-void __led_init(led_id_t mask, int state);
-void __led_set(led_id_t mask, int state);
-void __led_toggle(led_id_t mask);
-#endif
/* use LED0 to indicate booting/alive */
#define STATUS_LED_BOOT 0
-#define STATUS_LED_BIT 1
+#define STATUS_LED_BIT GPIO_PF8
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
/* use LED1 to indicate crash */
#define STATUS_LED_CRASH 1
-#define STATUS_LED_BIT1 2
+#define STATUS_LED_BIT1 GPIO_PG11
#define STATUS_LED_STATE1 STATUS_LED_ON
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+/* #define STATUS_LED_BIT2 GPIO_PG12 */
#endif
diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h
new file mode 100644
index 0000000..eb3a2b7
--- /dev/null
+++ b/include/configs/bf527-ad7160-eval.h
@@ -0,0 +1,148 @@
+/*
+ * U-boot - Configuration file for BF527 AD7160-EVAL board
+ */
+
+#ifndef __CONFIG_BF527_AD7160_EVAL_H__
+#define __CONFIG_BF527_AD7160_EVAL_H__
+
+#include <asm/config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU bf527-0.2
+#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
+
+
+/*
+ * Clock Settings
+ * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz */
+#define CONFIG_CLKIN_HZ 24000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
+/* 1 = CLKIN / 2 */
+#define CONFIG_CLKIN_HALF 0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
+/* 1 = bypass PLL */
+#define CONFIG_PLL_BYPASS 0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
+/* Values can range from 0-63 (where 0 means 64) */
+#define CONFIG_VCO_MULT 25
+/* CCLK_DIV controls the core clock divider */
+/* Values can be 1, 2, 4, or 8 ONLY */
+#define CONFIG_CCLK_DIV 1
+/* SCLK_DIV controls the system clock divider */
+/* Values can range from 1-15 */
+#define CONFIG_SCLK_DIV 5
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_ADD_WDTH 10
+#define CONFIG_MEM_SIZE 64
+
+#define CONFIG_EBIU_SDRRC_VAL 0x03F6
+#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS)
+
+#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL)
+#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
+#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
+
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (640 * 1024)
+
+
+/*
+ * NAND Settings
+ * (can't be used same time as ethernet)
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+# define CONFIG_BFIN_NFC
+# define CONFIG_BFIN_NFC_BOOTROM_ECC
+#endif
+#ifdef CONFIG_BFIN_NFC
+#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
+#define CONFIG_DRIVER_NAND_BFIN
+#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#endif
+
+
+/*
+ * Flash Settings
+ */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE 0x20000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 259
+
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ 30000000
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
+
+/*
+ * Env Storage Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x10000
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x40000
+#define CONFIG_ENV_SIZE 0x20000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET 0x4000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x2000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+
+
+/*
+ * I2C Settings
+ */
+#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_HARD_I2C 1
+
+
+/*
+ * SPI_MMC Settings
+ */
+#define CONFIG_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_SPI_MMC
+#define CONFIG_SPI_MMC_DEFAULT_CS (7 + GPIO_PH3)
+
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_UART_CONSOLE 0
+
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+
+#endif
diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h
index 7800c32..07e4ce8 100644
--- a/include/configs/bf527-ezkit.h
+++ b/include/configs/bf527-ezkit.h
@@ -138,8 +138,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index c80ddca..37a7059 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -136,8 +136,6 @@
} while (0)
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
#endif
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 80c4884..02c8bc3 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -180,8 +180,6 @@
} while (0)
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
#endif
@@ -230,23 +228,19 @@
/* define to enable run status via led */
/* #define CONFIG_STATUS_LED */
#ifdef CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
#define CONFIG_BOARD_SPECIFIC_LED
-#ifndef __ASSEMBLY__
-typedef unsigned int led_id_t;
-void __led_init(led_id_t mask, int state);
-void __led_set(led_id_t mask, int state);
-void __led_toggle(led_id_t mask);
-#endif
-/* use LED1 to indicate booting/alive */
+/* use LED0 to indicate booting/alive */
#define STATUS_LED_BOOT 0
-#define STATUS_LED_BIT 1
+#define STATUS_LED_BIT GPIO_PF2
#define STATUS_LED_STATE STATUS_LED_ON
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
-/* use LED2 to indicate crash */
+/* use LED1 to indicate crash */
#define STATUS_LED_CRASH 1
-#define STATUS_LED_BIT1 2
+#define STATUS_LED_BIT1 GPIO_PF3
#define STATUS_LED_STATE1 STATUS_LED_ON
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+/* #define STATUS_LED_BIT2 GPIO_PF4 */
#endif
/* define to enable splash screen support */
diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h
index cf40d06..39bbb41 100644
--- a/include/configs/bf537-pnav.h
+++ b/include/configs/bf537-pnav.h
@@ -132,7 +132,6 @@
#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
-#define BFIN_NAND_READY PF12
#define BFIN_NAND_WRITE(addr, cmd) \
do { \
bfin_write8(addr, cmd); \
@@ -141,13 +140,7 @@
#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTHIO() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
- do { \
- bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~BFIN_NAND_READY); \
- bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() & ~BFIN_NAND_READY); \
- bfin_write_PORTHIO_INEN(bfin_read_PORTHIO_INEN() | BFIN_NAND_READY); \
- } while (0)
+#define NAND_PLAT_GPIO_DEV_READY GPIO_PF12
/*
@@ -155,8 +148,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 92ceb38..96704d7 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -137,8 +137,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
@@ -157,7 +155,6 @@
#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
-#define BFIN_NAND_READY PF3
#define BFIN_NAND_WRITE(addr, cmd) \
do { \
bfin_write8(addr, cmd); \
@@ -166,13 +163,7 @@
#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTFIO() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
- do { \
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \
- bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \
- bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \
- } while (0)
+#define NAND_PLAT_GPIO_DEV_READY GPIO_PF3
/*
@@ -268,8 +259,6 @@
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
-/* #define CONFIG_BF537_STAMP_LEDCMD 1 */
-
/* Define if want to do post memory test */
#undef CONFIG_POST
#ifdef CONFIG_POST
diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h
index 59e0565..1c14b6b 100644
--- a/include/configs/bf538f-ezkit.h
+++ b/include/configs/bf538f-ezkit.h
@@ -134,8 +134,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index f9c9711..60cca0c 100644
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -140,8 +140,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h
index 0be170c..0c0204f 100644
--- a/include/configs/bf561-acvilon.h
+++ b/include/configs/bf561-acvilon.h
@@ -131,7 +131,6 @@
#define CONFIG_ENV_SECT_SIZE (1056 * 8)
#define CONFIG_ENV_OFFSET ((16 + 256) * 1056)
#define CONFIG_ENV_SIZE (8 * 1056)
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
/*
@@ -145,7 +144,6 @@
#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3))
-#define BFIN_NAND_READY PF10
#define BFIN_NAND_WRITE(addr, cmd) \
do { \
bfin_write8(addr, cmd); \
@@ -154,12 +152,7 @@
#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip) (bfin_read_FIO0_FLAG_D() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
- do { \
- bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() & ~BFIN_NAND_READY); \
- bfin_write_FIO0_INEN(bfin_read_FIO0_INEN() | BFIN_NAND_READY); \
- } while (0)
+#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10
/*
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 1e3fdef..036bfe4 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -151,8 +151,6 @@
} while (0)
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
#endif
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 1896cf5..901a32f 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -83,6 +83,7 @@
# define CONFIG_CMD_CPLBINFO
# define CONFIG_CMD_ELF
# define CONFIG_ELF_SIMPLE_LOAD
+# define CONFIG_CMD_GPIO
# define CONFIG_CMD_KGDB
# define CONFIG_CMD_REGINFO
# define CONFIG_CMD_STRINGS
@@ -247,12 +248,26 @@
# define CONFIG_SYS_AUTOLOAD "no"
# endif
# endif
+# define CONFIG_IP_DEFRAG
# define CONFIG_NET_RETRY_COUNT 20
#endif
/*
+ * I2C Settings
+ */
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+# ifndef CONFIG_SYS_I2C_SPEED
+# define CONFIG_SYS_I2C_SPEED 50000
+# endif
+# ifndef CONFIG_SYS_I2C_SLAVE
+# define CONFIG_SYS_I2C_SLAVE 0
+# endif
+#endif
+
+/*
* Misc Settings
*/
+#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
#define CONFIG_LZMA
#endif
diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h
index ad1dd12..e0c6d53 100644
--- a/include/configs/cm-bf527.h
+++ b/include/configs/cm-bf527.h
@@ -117,8 +117,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index 8d0bc12..742df9c 100644
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -119,8 +119,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index bbea3ab..9def99f 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -120,8 +120,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index 93c4c8d..63b9399 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -107,8 +107,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index b4fda76..049298c 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -131,15 +131,12 @@
(CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024)
#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
#define CONFIG_DRIVER_AT91EMAC 1
#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
+#define CONFIG_RMII 1
+#define CONFIG_MII 1
+#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1
#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII 1
-#define CONFIG_PHY_ADDRESS (1 << 5)
#define CONFIG_KS8721_PHY 1
#define CONFIG_SYS_FLASH_CFI 1
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index c3d95a0..055931c 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -131,12 +131,23 @@
* Commands configuration - using default command set for now
*/
#include <config_cmd_default.h>
+
/*
- * Disabling some default commands for staggered bring-up
+ * Network
*/
-#undef CONFIG_CMD_BOOTD /* no bootd since no net */
-#undef CONFIG_CMD_NET /* no net since no eth */
-#undef CONFIG_CMD_NFS /* no NFS since no net */
+
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE /* Enable Marvell GbE Driver */
+#define CONFIG_MVGBE_PORTS {1} /* enable port 0 only */
+#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION /* don't randomize MAC */
+#define CONFIG_PHY_BASE_ADR 0x8
+#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+#define CONFIG_NET_MULTI /* specify more that one ports available */
+#define CONFIG_MII /* expose smi ove miiphy interface */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
+#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
+#endif
/*
* Environment variables configurations
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index 2fbc6ad..eb3fa57 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -172,9 +172,9 @@
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MII /* expose smi ove miiphy interface */
#define CONFIG_CMD_MII
-#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,1} /* enable both ports */
+#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
#define CONFIG_PHY_BASE_ADR 0
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv88e1121 PHY */
diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
index 2eef5ef..2c0a263 100644
--- a/include/configs/ibf-dsp561.h
+++ b/include/configs/ibf-dsp561.h
@@ -58,6 +58,18 @@
/*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK 1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AX88180 1
+#define AX88180_BASE 0x2c000000
+#define CONFIG_HOSTNAME ibf-dsp561
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
+
+
+/*
* Flash Settings
*/
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
@@ -126,8 +138,6 @@
} while (0)
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
#endif
diff --git a/include/configs/ip04.h b/include/configs/ip04.h
index 425a745..c024d78 100644
--- a/include/configs/ip04.h
+++ b/include/configs/ip04.h
@@ -116,7 +116,6 @@
#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
-#define BFIN_NAND_READY PF10
#define BFIN_NAND_WRITE(addr, cmd) \
do { \
bfin_write8(addr, cmd); \
@@ -125,14 +124,7 @@
#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip) (bfin_read_FIO_FLAG_D() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
- do { \
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() & ~BFIN_NAND_READY); \
- bfin_write_FIO_INEN(bfin_read_FIO_INEN() | BFIN_NAND_READY); \
- bfin_write_FIO_EDGE(bfin_read_FIO_EDGE() & ~BFIN_NAND_READY); \
- bfin_write_FIO_POLAR(bfin_read_FIO_POLAR() & ~BFIN_NAND_READY); \
- } while (0)
+#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10
/*
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index a928c2c..6519c90 100644
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -127,9 +127,9 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MII /* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
#define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */
diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h
index 96b4d1c..9ef03a6 100644
--- a/include/configs/mv88f6281gtw_ge.h
+++ b/include/configs/mv88f6281gtw_ge.h
@@ -172,9 +172,9 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MII /* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
#endif /* CONFIG_CMD_NET */
diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h
index d2f4502..52fa73d 100644
--- a/include/configs/openrd_base.h
+++ b/include/configs/openrd_base.h
@@ -183,9 +183,9 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MII /* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0x8
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h
index 3d8e25c..5857301 100644
--- a/include/configs/rd6281a.h
+++ b/include/configs/rd6281a.h
@@ -171,8 +171,8 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MII /* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,1} /* enable both ports */
+#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
+#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
#define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */
#define CONFIG_PHY_SPEED _1000BASET /*Force PHYspeed to 1GBPs */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index e9edc44..c5de86e 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -174,9 +174,9 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* specify more that one ports available */
#define CONFIG_MII /* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h
index 9c04d8a..52055e8 100644
--- a/include/configs/tcm-bf518.h
+++ b/include/configs/tcm-bf518.h
@@ -106,8 +106,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 409a042..24ce8f8 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -120,8 +120,6 @@
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
/*
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
new file mode 100644
index 0000000..1589913
--- /dev/null
+++ b/include/configs/ve8313.h
@@ -0,0 +1,511 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006.
+ *
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * ve8313 board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1
+#define CONFIG_MPC83xx 1
+#define CONFIG_MPC831x 1
+#define CONFIG_MPC8313 1
+#define CONFIG_VE8313 1
+
+#define CONFIG_PCI 1
+
+#define CONFIG_BOARD_EARLY_INIT_F 1
+
+/*
+ * On-board devices
+ *
+ */
+#define CONFIG_83XX_CLKIN 32000000 /* in Hz */
+
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+
+#define CONFIG_SYS_IMMR 0xE0000000
+
+#define CONFIG_SYS_MEMTEST_START 0x00001000
+#define CONFIG_SYS_MEMTEST_END 0x07000000
+
+#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth */
+#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count */
+
+/*
+ * Device configurations
+ */
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
+
+/*
+ * Manually set up DDR parameters, as this board does not
+ * have the SPD connected to I2C.
+ */
+#define CONFIG_SYS_DDR_SIZE 128 /* MB */
+#define CONFIG_SYS_DDR_CONFIG ( CSCONFIG_EN \
+ | CSCONFIG_AP \
+ | 0x00040000 /* TODO */ \
+ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
+ /* 0x80840102 */
+
+#define CONFIG_SYS_DDR_TIMING_3 0x00000000
+#define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+ | ( 3 << TIMING_CFG0_RRT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_WWT_SHIFT ) \
+ | ( 7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+ | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+ /* 0x0e720802 */
+#define CONFIG_SYS_DDR_TIMING_1 ( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \
+ | ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+ | ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \
+ | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+ | ( 6 << TIMING_CFG1_REFREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+ /* 0x26256222 */
+#define CONFIG_SYS_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+ | ( 5 << TIMING_CFG2_CPO_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+ | ( 1 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+ | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+ | ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+ /* 0x029028c7 */
+#define CONFIG_SYS_DDR_INTERVAL ( ( 0x320 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+ | ( 0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+ /* 0x03202000 */
+#define CONFIG_SYS_SDRAM_CFG ( SDRAM_CFG_SREN \
+ | SDRAM_CFG_SDRAM_TYPE_DDR2 \
+ | SDRAM_CFG_32_BE )
+ /* 0x43080000 */
+#define CONFIG_SYS_SDRAM_CFG2 0x00401000
+#define CONFIG_SYS_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \
+ | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
+ /* 0x44400232 */
+#define CONFIG_SYS_DDR_MODE_2 0x8000C000
+
+#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+ /*0x02000000*/
+#define CONFIG_SYS_DDRCDR_VALUE ( DDRCDR_EN \
+ | DDRCDR_PZ_NOMZ \
+ | DDRCDR_NZ_NOMZ \
+ | DDRCDR_M_ODR )
+ /* 0x73000002 */
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
+#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CONFIG_SYS_FLASH_BASE 0xFE000000
+#define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
+
+#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE | \
+ (2 << BR_PS_SHIFT) | /* 16 bit */ \
+ BR_V) /* valid */
+#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_ACS_DIV4 \
+ | OR_GPCM_SCY_5 \
+ | OR_GPCM_TRLX \
+ | OR_GPCM_EAD)
+ /* 0xfe000c55 */
+
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_SYS_INIT_RAM_LOCK 1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/
+
+#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
+
+/*
+ * Local Bus LCRR and LBCR regs
+ */
+#define CONFIG_SYS_LCRR_EADC LCRR_EADC_3
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
+
+#define CONFIG_SYS_LBC_LBCR 0x00040000
+
+#define CONFIG_SYS_LBC_MRTPR 0x20000000
+
+/*
+ * NAND settings
+ */
+#define CONFIG_SYS_NAND_BASE 0x61000000
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND 1
+#define CONFIG_NAND_FSL_ELBC 1
+#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
+
+#define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \
+ | BR_PS_8 \
+ | BR_DECC_CHK_GEN \
+ | BR_MS_FCM \
+ | BR_V ) /* valid */
+ /* 0x61000c21 */
+#define CONFIG_SYS_NAND_OR_PRELIM (0xffff8000 \
+ | OR_FCM_BCTLD \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_2 \
+ | OR_FCM_RST \
+ | OR_FCM_TRLX)
+ /* 0xffff90ac */
+
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
+
+#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
+
+/* CS2 NvRAM */
+#define CONFIG_SYS_BR2_PRELIM (0x60000000 \
+ | BR_PS_8 \
+ | BR_V)
+ /* 0x60000801 */
+#define CONFIG_SYS_OR2_PRELIM (0xfffe0000 \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_3 \
+ | OR_GPCM_TRLX \
+ | OR_GPCM_EHTR \
+ | OR_GPCM_EAD)
+ /* 0xfffe0937 */
+/* local bus read write buffer mapping SRAM@0x64000000 */
+#define CONFIG_SYS_BR3_PRELIM (0x62000000 \
+ | BR_PS_16 \
+ | BR_V)
+ /* 0x62001001 */
+
+#define CONFIG_SYS_OR3_PRELIM (0xfe000000 \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_15 \
+ | OR_GPCM_TRLX \
+ | OR_GPCM_EHTR \
+ | OR_GPCM_EAD)
+ /* 0xfe0009f7 */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#if defined(CONFIG_PCI)
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
+#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
+#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+#endif
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_TSEC1
+#ifdef CONFIG_TSEC1
+#define CONFIG_HAS_ETH0
+#define CONFIG_TSEC1_NAME "TSEC1"
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define TSEC1_PHY_ADDR 0x01
+#define TSEC1_FLAGS 0
+#define TSEC1_PHYIDX 0
+#endif
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC1"
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
+#define CONFIG_ENV_SIZE 0x4000
+/* Address and size of Redundant Environment Sector */
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PCI
+
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
+#define CONFIG_SYS_HZ 1000 /* 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* 0x64050000 */
+#define CONFIG_SYS_HRCW_LOW (\
+ 0x20000000 /* reserved, must be set */ |\
+ HRCWL_DDRCM |\
+ HRCWL_CSB_TO_CLKIN_4X1 | \
+ HRCWL_CORE_TO_CSB_2_5X1)
+
+/* 0xa0600004 */
+#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST | \
+ HRCWH_PCI_ARBITER_ENABLE | \
+ HRCWH_CORE_ENABLE | \
+ HRCWH_FROM_0X00000100 | \
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT | \
+ HRCWH_TSEC1M_IN_MII | \
+ HRCWH_BIG_ENDIAN | \
+ HRCWH_LALE_EARLY)
+
+/* System IO Config */
+#define CONFIG_SYS_SICRH (0x01000000 | \
+ SICRH_ETSEC2_B | \
+ SICRH_ETSEC2_C | \
+ SICRH_ETSEC2_D | \
+ SICRH_ETSEC2_E | \
+ SICRH_ETSEC2_F | \
+ SICRH_ETSEC2_G | \
+ SICRH_TSOBI1 | \
+ SICRH_TSOBI2)
+ /* 0x010fff03 */
+#define CONFIG_SYS_SICRL (SICRL_LBC | \
+ SICRL_SPI_A | \
+ SICRL_SPI_B | \
+ SICRL_SPI_C | \
+ SICRL_SPI_D | \
+ SICRL_ETSEC2_A)
+ /* 0x33fc0003) */
+
+#define CONFIG_SYS_HID0_INIT 0x000000000
+#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_INSTRUCTION_CACHE)
+
+#define CONFIG_SYS_HID2 HID2_HBE
+
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
+/* DDR @ 0x00000000 */
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+
+#if defined(CONFIG_PCI)
+/* PCI @ 0x80000000 */
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+#else
+#define CONFIG_SYS_IBAT1L (0)
+#define CONFIG_SYS_IBAT1U (0)
+#define CONFIG_SYS_IBAT2L (0)
+#define CONFIG_SYS_IBAT2U (0)
+#endif
+
+/* PCI2 not supported on 8313 */
+#define CONFIG_SYS_IBAT3L (0)
+#define CONFIG_SYS_IBAT3U (0)
+#define CONFIG_SYS_IBAT4L (0)
+#define CONFIG_SYS_IBAT4U (0)
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | \
+ BATU_VP)
+
+/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* FPGA, SRAM, NAND @ 0x60000000 */
+#define CONFIG_SYS_IBAT7L (0x60000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT7U (0x60000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CONFIG_NETDEV eth0
+
+#define CONFIG_HOSTNAME ve8313
+#define CONFIG_UBOOTPATH ve8313/u-boot.bin
+
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#define CONFIG_BAUDRATE 115200
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+ "ethprime=" MK_STR(CONFIG_TSEC1_NAME) "\0" \
+ "u-boot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "u-boot_addr_r=100000\0" \
+ "load=tftp ${u-boot_addr_r} ${u-boot}\0" \
+ "update=protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
+ "erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
+ "cp.b ${u-boot_addr_r} " MK_STR(CONFIG_SYS_FLASH_BASE) \
+ " ${filesize};" \
+ "protect on " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif /* __CONFIG_H */
diff --git a/include/environment.h b/include/environment.h
index 203f731..fbccf6a 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -74,15 +74,24 @@
#endif /* CONFIG_ENV_IS_IN_FLASH */
#if defined(CONFIG_ENV_IS_IN_NAND)
-# ifndef CONFIG_ENV_OFFSET
-# error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND"
-# endif
+# if defined(CONFIG_ENV_OFFSET_OOB)
+# ifdef CONFIG_ENV_OFFSET_REDUND
+# error "CONFIG_ENV_OFFSET_REDUND is not supported when CONFIG_ENV_OFFSET_OOB"
+# error "is set"
+# endif
+extern unsigned long nand_env_oob_offset;
+# define CONFIG_ENV_OFFSET nand_env_oob_offset
+# else
+# ifndef CONFIG_ENV_OFFSET
+# error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND"
+# endif
+# ifdef CONFIG_ENV_OFFSET_REDUND
+# define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+# endif
+# endif /* CONFIG_ENV_OFFSET_OOB */
# ifndef CONFIG_ENV_SIZE
# error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_NAND"
# endif
-# ifdef CONFIG_ENV_OFFSET_REDUND
-# define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-# endif
#endif /* CONFIG_ENV_IS_IN_NAND */
#if defined(CONFIG_ENV_IS_IN_MG_DISK)
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 5214911..ba6cdf1 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -65,6 +65,7 @@
#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16)
#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20)
+#define SPR_8308 0x8100
#define SPR_831X_FAMILY 0x80B
#define SPR_8311 0x80B2
#define SPR_8313 0x80B0
@@ -115,8 +116,9 @@
#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */
#define SPCR_TSEC2EP_SHIFT (31-31)
-#elif defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
-/* SPCR bits - MPC831x and MPC837x specific */
+#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC837x)
+/* SPCR bits - MPC8308, MPC831x and MPC837x specific */
#define SPCR_TSECDP 0x00003000 /* TSEC data priority */
#define SPCR_TSECDP_SHIFT (31-19)
#define SPCR_TSECBDP 0x00000C00 /* TSEC buffer descriptor priority */
@@ -473,7 +475,7 @@
#define HRCWL_CE_TO_PLL_1X30 0x0000001E
#define HRCWL_CE_TO_PLL_1X31 0x0000001F
-#elif defined(CONFIG_MPC8315)
+#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315)
#define HRCWL_SVCOD 0x30000000
#define HRCWL_SVCOD_SHIFT 28
#define HRCWL_SVCOD_DIV_2 0x00000000
@@ -541,7 +543,8 @@
#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
-#if defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC837x)
#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000
#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000
#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
@@ -592,7 +595,8 @@
/* RSR - Reset Status Register
*/
-#if defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC837x)
#define RSR_RSTSRC 0xF0000000 /* Reset source */
#define RSR_RSTSRC_SHIFT 28
#else
@@ -734,8 +738,8 @@
#define SCCR_USBDRCM_2 0x00200000
#define SCCR_USBDRCM_3 0x00300000
-#elif defined(CONFIG_MPC8315)
-/* SCCR bits - MPC8315 specific */
+#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315)
+/* SCCR bits - MPC8315/MPC8308 specific */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC1CM_SHIFT 30
#define SCCR_TSEC1CM_0 0x00000000
@@ -750,6 +754,13 @@
#define SCCR_TSEC2CM_2 0x20000000
#define SCCR_TSEC2CM_3 0x30000000
+#define SCCR_SDHCCM 0x0c000000
+#define SCCR_SDHCCM_SHIFT 26
+#define SCCR_SDHCCM_0 0x00000000
+#define SCCR_SDHCCM_1 0x04000000
+#define SCCR_SDHCCM_2 0x08000000
+#define SCCR_SDHCCM_3 0x0c000000
+
#define SCCR_USBDRCM 0x00c00000
#define SCCR_USBDRCM_SHIFT 22
#define SCCR_USBDRCM_0 0x00000000
diff --git a/include/nand.h b/include/nand.h
index 2a81597..8bdf419 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -130,3 +130,12 @@
__attribute__((noreturn)) void nand_boot(void);
#endif
+
+#ifdef CONFIG_ENV_OFFSET_OOB
+#define ENV_OOB_MARKER 0x30425645 /*"EVB0" in little-endian -- offset is stored
+ as block number*/
+#define ENV_OOB_MARKER_OLD 0x30564e45 /*"ENV0" in little-endian -- offset is
+ stored as byte number */
+#define ENV_OFFSET_SIZE 8
+int get_nand_env_oob(nand_info_t *nand, unsigned long *result);
+#endif
diff --git a/include/netdev.h b/include/netdev.h
index 882642a..94eedfe 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -43,12 +43,14 @@
/* Driver initialization prototypes */
int altera_tse_initialize(u8 dev_num, int mac_base,
int sgdma_rx_base, int sgdma_tx_base);
+int ax88180_initialize(bd_t *bis);
int au1x00_enet_initialize(bd_t*);
int at91emac_register(bd_t *bis, unsigned long iobase);
int bfin_EMAC_initialize(bd_t *bis);
int cs8900_initialize(u8 dev_num, int base_addr);
int dc21x4x_initialize(bd_t *bis);
int davinci_emac_initialize(void);
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);
@@ -61,7 +63,6 @@
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
int inca_switch_initialize(bd_t *bis);
-int kirkwood_egiga_initialize(bd_t *bis);
int lan91c96_initialize(u8 dev_num, int base_addr);
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
int mcdmafec_initialize(bd_t *bis);
@@ -70,6 +71,7 @@
int mpc5xxx_fec_initialize(bd_t *bis);
int mpc8220_fec_initialize(bd_t *bis);
int mpc82xx_scc_enet_initialize(bd_t *bis);
+int mvgbe_initialize(bd_t *bis);
int natsemi_initialize(bd_t *bis);
int npe_initialize(bd_t *bis);
int ns8382x_initialize(bd_t *bis);
diff --git a/include/status_led.h b/include/status_led.h
index 9dbf01f..f213595 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -346,9 +346,6 @@
#elif defined(CONFIG_NIOS2)
/* XXX empty just to avoid the error */
/************************************************************************/
-#elif defined(CONFIG_BLACKFIN)
-/* XXX empty just to avoid the error */
-/************************************************************************/
#elif defined(CONFIG_V38B)
# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */
diff --git a/net/eth.c b/net/eth.c
index 83d559c..de6d5c6 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -234,6 +234,9 @@
puts (" [PRIME]");
}
+ if (strchr(dev->name, ' '))
+ puts("\nWarning: eth device name has a space!\n");
+
eth_getenv_enetaddr_by_index(eth_number, env_enetaddr);
if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {