| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm SM8150 Display MDSS |
| |
| maintainers: |
| - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
| |
| description: |
| Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates |
| sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree |
| bindings of MDSS are mentioned for SM8150 target. |
| |
| $ref: /schemas/display/msm/mdss-common.yaml# |
| |
| properties: |
| compatible: |
| items: |
| - const: qcom,sm8150-mdss |
| |
| clocks: |
| items: |
| - description: Display AHB clock from gcc |
| - description: Display hf axi clock |
| - description: Display sf axi clock |
| - description: Display core clock |
| |
| clock-names: |
| items: |
| - const: iface |
| - const: bus |
| - const: nrt_bus |
| - const: core |
| |
| iommus: |
| maxItems: 1 |
| |
| interconnects: |
| maxItems: 2 |
| |
| interconnect-names: |
| maxItems: 2 |
| |
| patternProperties: |
| "^display-controller@[0-9a-f]+$": |
| type: object |
| additionalProperties: true |
| |
| properties: |
| compatible: |
| const: qcom,sm8150-dpu |
| |
| "^dsi@[0-9a-f]+$": |
| type: object |
| additionalProperties: true |
| |
| properties: |
| compatible: |
| items: |
| - const: qcom,sm8150-dsi-ctrl |
| - const: qcom,mdss-dsi-ctrl |
| |
| "^phy@[0-9a-f]+$": |
| type: object |
| additionalProperties: true |
| |
| properties: |
| compatible: |
| const: qcom,dsi-phy-7nm-8150 |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/qcom,dispcc-sm8150.h> |
| #include <dt-bindings/clock/qcom,gcc-sm8150.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interconnect/qcom,sm8150.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| |
| display-subsystem@ae00000 { |
| compatible = "qcom,sm8150-mdss"; |
| reg = <0x0ae00000 0x1000>; |
| reg-names = "mdss"; |
| |
| interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, |
| <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; |
| interconnect-names = "mdp0-mem", "mdp1-mem"; |
| |
| power-domains = <&dispcc MDSS_GDSC>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&gcc GCC_DISP_SF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>; |
| clock-names = "iface", "bus", "nrt_bus", "core"; |
| |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| iommus = <&apps_smmu 0x800 0x420>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| display-controller@ae01000 { |
| compatible = "qcom,sm8150-dpu"; |
| reg = <0x0ae01000 0x8f000>, |
| <0x0aeb0000 0x2008>; |
| reg-names = "mdp", "vbif"; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| clock-names = "iface", "bus", "core", "vsync"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| operating-points-v2 = <&mdp_opp_table>; |
| power-domains = <&rpmhpd SM8150_MMCX>; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dpu_intf1_out: endpoint { |
| remote-endpoint = <&dsi0_in>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| dpu_intf2_out: endpoint { |
| remote-endpoint = <&dsi1_in>; |
| }; |
| }; |
| }; |
| |
| mdp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-171428571 { |
| opp-hz = /bits/ 64 <171428571>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-345000000 { |
| opp-hz = /bits/ 64 <345000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-460000000 { |
| opp-hz = /bits/ 64 <460000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| dsi@ae94000 { |
| compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| reg = <0x0ae94000 0x400>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <4>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| <&dispcc DISP_CC_MDSS_ESC0_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>; |
| clock-names = "byte", |
| "byte_intf", |
| "pixel", |
| "core", |
| "iface", |
| "bus"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; |
| |
| operating-points-v2 = <&dsi_opp_table>; |
| power-domains = <&rpmhpd SM8150_MMCX>; |
| |
| phys = <&dsi0_phy>; |
| phy-names = "dsi"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dsi0_in: endpoint { |
| remote-endpoint = <&dpu_intf1_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| dsi0_out: endpoint { |
| }; |
| }; |
| }; |
| |
| dsi_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-187500000 { |
| opp-hz = /bits/ 64 <187500000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-358000000 { |
| opp-hz = /bits/ 64 <358000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| }; |
| }; |
| |
| dsi0_phy: phy@ae94400 { |
| compatible = "qcom,dsi-phy-7nm-8150"; |
| reg = <0x0ae94400 0x200>, |
| <0x0ae94600 0x280>, |
| <0x0ae94900 0x260>; |
| reg-names = "dsi_phy", |
| "dsi_phy_lane", |
| "dsi_pll"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", "ref"; |
| vdds-supply = <&vreg_dsi_phy>; |
| }; |
| |
| dsi@ae96000 { |
| compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| reg = <0x0ae96000 0x400>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <5>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_PCLK1_CLK>, |
| <&dispcc DISP_CC_MDSS_ESC1_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>; |
| clock-names = "byte", |
| "byte_intf", |
| "pixel", |
| "core", |
| "iface", |
| "bus"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; |
| assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; |
| |
| operating-points-v2 = <&dsi_opp_table>; |
| power-domains = <&rpmhpd SM8150_MMCX>; |
| |
| phys = <&dsi1_phy>; |
| phy-names = "dsi"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dsi1_in: endpoint { |
| remote-endpoint = <&dpu_intf2_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| dsi1_out: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| dsi1_phy: phy@ae96400 { |
| compatible = "qcom,dsi-phy-7nm-8150"; |
| reg = <0x0ae96400 0x200>, |
| <0x0ae96600 0x280>, |
| <0x0ae96900 0x260>; |
| reg-names = "dsi_phy", |
| "dsi_phy_lane", |
| "dsi_pll"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", "ref"; |
| vdds-supply = <&vreg_dsi_phy>; |
| }; |
| }; |
| ... |