serial: uartlite: Move driver to DM
Enable SPL DM too.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 604f681..30ea484 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -13,6 +13,7 @@
select SUPPORT_SPL
select OF_CONTROL
select DM
+ select DM_SERIAL
endchoice
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index ed336e6..6b038b8 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -1,5 +1,6 @@
CONFIG_MICROBLAZE=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_DM=y
CONFIG_TARGET_MICROBLAZE_GENERIC=y
CONFIG_SYS_TEXT_BASE=0x29000000
CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
@@ -7,4 +8,5 @@
CONFIG_SYS_PROMPT="U-Boot-mONStR> "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
diff --git a/doc/device-tree-bindings/serial/xilinx_uartlite.txt b/doc/device-tree-bindings/serial/xilinx_uartlite.txt
new file mode 100644
index 0000000..d15753c
--- /dev/null
+++ b/doc/device-tree-bindings/serial/xilinx_uartlite.txt
@@ -0,0 +1,13 @@
+Binding for Xilinx Uartlite Controller
+
+Required properties:
+- compatible : should be "xlnx,xps-uartlite-1.00.a", or "xlnx,opb-uartlite-1.00.b"
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+
+Example:
+ serial@40600000 {
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ interrupts = <1 0>;
+ reg = <0x40600000 0x10000>;
+ };
diff --git a/doc/driver-model/serial-howto.txt b/doc/driver-model/serial-howto.txt
index c933b90..e5e482e 100644
--- a/doc/driver-model/serial-howto.txt
+++ b/doc/driver-model/serial-howto.txt
@@ -15,7 +15,6 @@
serial_pxa.c
serial_s3c24x0.c
serial_sa1100.c
- serial_xuartlite.c
usbtty.c
You should complete this by the end of January 2016.
diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c
index 988438e..157e14d 100644
--- a/drivers/serial/serial_xuartlite.c
+++ b/drivers/serial/serial_xuartlite.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2008-2011 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2008 - 2015 Michal Simek <monstr@monstr.eu>
* Clean driver and add xilinx constant from header file
*
* (C) Copyright 2004 Atmark Techno, Inc.
@@ -10,13 +10,17 @@
#include <config.h>
#include <common.h>
+#include <dm.h>
#include <asm/io.h>
#include <linux/compiler.h>
#include <serial.h>
-#define SR_TX_FIFO_FULL 0x08 /* transmit FIFO full */
-#define SR_RX_FIFO_VALID_DATA 0x01 /* data in receive FIFO */
-#define SR_RX_FIFO_FULL 0x02 /* receive FIFO full */
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SR_TX_FIFO_FULL BIT(3) /* transmit FIFO full */
+#define SR_TX_FIFO_EMPTY BIT(2) /* transmit FIFO empty */
+#define SR_RX_FIFO_VALID_DATA BIT(0) /* data in receive FIFO */
+#define SR_RX_FIFO_FULL BIT(1) /* receive FIFO full */
#define ULITE_CONTROL_RST_TX 0x01
#define ULITE_CONTROL_RST_RX 0x02
@@ -28,135 +32,85 @@
unsigned int control;
};
-static struct uartlite *userial_ports[4] = {
-#ifdef XILINX_UARTLITE_BASEADDR
- [0] = (struct uartlite *)XILINX_UARTLITE_BASEADDR,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR1
- [1] = (struct uartlite *)XILINX_UARTLITE_BASEADDR1,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR2
- [2] = (struct uartlite *)XILINX_UARTLITE_BASEADDR2,
-#endif
-#ifdef XILINX_UARTLITE_BASEADDR3
- [3] = (struct uartlite *)XILINX_UARTLITE_BASEADDR3
-#endif
+struct uartlite_platdata {
+ struct uartlite *regs;
};
-static void uartlite_serial_putc(const char c, const int port)
+static int uartlite_serial_putc(struct udevice *dev, const char ch)
{
- struct uartlite *regs = userial_ports[port];
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+ struct uartlite *regs = plat->regs;
- if (c == '\n')
- uartlite_serial_putc('\r', port);
+ if (in_be32(®s->status) & SR_TX_FIFO_FULL)
+ return -EAGAIN;
- while (in_be32(®s->status) & SR_TX_FIFO_FULL)
- ;
- out_be32(®s->tx_fifo, c & 0xff);
+ out_be32(®s->tx_fifo, ch & 0xff);
+
+ return 0;
}
-static void uartlite_serial_puts(const char *s, const int port)
+static int uartlite_serial_getc(struct udevice *dev)
{
- while (*s)
- uartlite_serial_putc(*s++, port);
-}
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+ struct uartlite *regs = plat->regs;
-static int uartlite_serial_getc(const int port)
-{
- struct uartlite *regs = userial_ports[port];
+ if (!(in_be32(®s->status) & SR_RX_FIFO_VALID_DATA))
+ return -EAGAIN;
- while (!(in_be32(®s->status) & SR_RX_FIFO_VALID_DATA))
- ;
return in_be32(®s->rx_fifo) & 0xff;
}
-static int uartlite_serial_tstc(const int port)
+static int uartlite_serial_pending(struct udevice *dev, bool input)
{
- struct uartlite *regs = userial_ports[port];
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+ struct uartlite *regs = plat->regs;
- return in_be32(®s->status) & SR_RX_FIFO_VALID_DATA;
+ if (input)
+ return in_be32(®s->status) & SR_RX_FIFO_VALID_DATA;
+
+ return !(in_be32(®s->status) & SR_TX_FIFO_EMPTY);
}
-static int uartlite_serial_init(const int port)
+static int uartlite_serial_probe(struct udevice *dev)
{
- struct uartlite *regs = userial_ports[port];
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
+ struct uartlite *regs = plat->regs;
- if (regs) {
- out_be32(®s->control, 0);
- out_be32(®s->control,
- ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
- in_be32(®s->control);
- return 0;
- }
+ out_be32(®s->control, 0);
+ out_be32(®s->control, ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX);
+ in_be32(®s->control);
- return -1;
+ return 0;
}
-/* Multi serial device functions */
-#define DECLARE_ESERIAL_FUNCTIONS(port) \
- static int userial##port##_init(void) \
- { return uartlite_serial_init(port); } \
- static void userial##port##_setbrg(void) {} \
- static int userial##port##_getc(void) \
- { return uartlite_serial_getc(port); } \
- static int userial##port##_tstc(void) \
- { return uartlite_serial_tstc(port); } \
- static void userial##port##_putc(const char c) \
- { uartlite_serial_putc(c, port); } \
- static void userial##port##_puts(const char *s) \
- { uartlite_serial_puts(s, port); }
-
-/* Serial device descriptor */
-#define INIT_ESERIAL_STRUCTURE(port, __name) { \
- .name = __name, \
- .start = userial##port##_init, \
- .stop = NULL, \
- .setbrg = userial##port##_setbrg, \
- .getc = userial##port##_getc, \
- .tstc = userial##port##_tstc, \
- .putc = userial##port##_putc, \
- .puts = userial##port##_puts, \
-}
-
-DECLARE_ESERIAL_FUNCTIONS(0);
-struct serial_device uartlite_serial0_device =
- INIT_ESERIAL_STRUCTURE(0, "ttyUL0");
-DECLARE_ESERIAL_FUNCTIONS(1);
-struct serial_device uartlite_serial1_device =
- INIT_ESERIAL_STRUCTURE(1, "ttyUL1");
-DECLARE_ESERIAL_FUNCTIONS(2);
-struct serial_device uartlite_serial2_device =
- INIT_ESERIAL_STRUCTURE(2, "ttyUL2");
-DECLARE_ESERIAL_FUNCTIONS(3);
-struct serial_device uartlite_serial3_device =
- INIT_ESERIAL_STRUCTURE(3, "ttyUL3");
-
-__weak struct serial_device *default_serial_console(void)
+static int uartlite_serial_ofdata_to_platdata(struct udevice *dev)
{
- if (userial_ports[0])
- return &uartlite_serial0_device;
- if (userial_ports[1])
- return &uartlite_serial1_device;
- if (userial_ports[2])
- return &uartlite_serial2_device;
- if (userial_ports[3])
- return &uartlite_serial3_device;
+ struct uartlite_platdata *plat = dev_get_platdata(dev);
- return NULL;
+ plat->regs = (struct uartlite *)dev_get_addr(dev);
+
+ return 0;
}
-void uartlite_serial_initialize(void)
-{
-#ifdef XILINX_UARTLITE_BASEADDR
- serial_register(&uartlite_serial0_device);
-#endif /* XILINX_UARTLITE_BASEADDR */
-#ifdef XILINX_UARTLITE_BASEADDR1
- serial_register(&uartlite_serial1_device);
-#endif /* XILINX_UARTLITE_BASEADDR1 */
-#ifdef XILINX_UARTLITE_BASEADDR2
- serial_register(&uartlite_serial2_device);
-#endif /* XILINX_UARTLITE_BASEADDR2 */
-#ifdef XILINX_UARTLITE_BASEADDR3
- serial_register(&uartlite_serial3_device);
-#endif /* XILINX_UARTLITE_BASEADDR3 */
-}
+static const struct dm_serial_ops uartlite_serial_ops = {
+ .putc = uartlite_serial_putc,
+ .pending = uartlite_serial_pending,
+ .getc = uartlite_serial_getc,
+};
+
+static const struct udevice_id uartlite_serial_ids[] = {
+ { .compatible = "xlnx,opb-uartlite-1.00.b", },
+ { .compatible = "xlnx,xps-uartlite-1.00.a" },
+ { }
+};
+
+U_BOOT_DRIVER(serial_uartlite) = {
+ .name = "serial_uartlite",
+ .id = UCLASS_SERIAL,
+ .of_match = uartlite_serial_ids,
+ .ofdata_to_platdata = uartlite_serial_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct uartlite_platdata),
+ .probe = uartlite_serial_probe,
+ .ops = &uartlite_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};