COMMON: Use __stringify() instead of xstr()
Kill multiple occurances and redeclaration of xstr in favor of __stringify().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 9983104..05480d4 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -148,9 +148,6 @@
"ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
-#define xstr(s) str(s)
-#define str(s) #s
-
/*
* boottargets
* - set 'subbootcmds'
@@ -187,7 +184,7 @@
":${hostname}:${netdev}:off3" \
" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \
" mem=${kernelmem} init=${init}" \
- " phram.phram=phvar,${varaddr}," xstr(CONFIG_KM_PHRAM) \
+ " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
" " CONFIG_KM_UBI_LINUX_MTD " " \
CONFIG_KM_DEF_BOOT_ARGS_CPU \
"\0" \
@@ -212,9 +209,9 @@
* - 'cramfsloadfdt': copy fdt from a cramfs to ram
*/
#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
- "cramfsaddr=" xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \
+ "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \
"cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \
- "ubicopy=ubi read "xstr(CONFIG_KM_CRAMFS_ADDR) \
+ "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \
" bootfs${boot_bank}\0" \
CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
@@ -227,7 +224,7 @@
#define CONFIG_KM_DEF_ENV_CONSTANTS \
"backup_bank=0\0" \
"release=run newenv; reset\0" \
- "pnvramsize=" xstr(CONFIG_KM_PNVRAM) "\0" \
+ "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0" \
"testbootcmd=setenv boot_bank ${test_bank}; " \
"run ${subbootcmds}; reset\0" \
""
@@ -252,7 +249,7 @@
"saveenv && saveenv && boot\0" \
"bootlimit=3\0" \
"init=/sbin/init-overlay.sh\0" \
- "load_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
+ "load_addr_r="__stringify(CONFIG_KM_KERNEL_ADDR) "\0" \
"load=tftpboot ${load_addr_r} ${u-boot}\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 506755b..bd5bdbc 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -80,14 +80,14 @@
"cramfsloadfdt=" \
"cramfsload ${fdt_addr_r} " \
"fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \
- "fdt_addr_r=" xstr(CONFIG_KM_FDT_ADDR) "\0" \
- "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \
+ "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"update=" \
- "protect off " xstr(BOOTFLASH_START) " +${filesize} && "\
- "erase " xstr(BOOTFLASH_START) " +${filesize} && " \
- "cp.b ${load_addr_r} " xstr(BOOTFLASH_START) \
+ "protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\
+ "erase " __stringify(BOOTFLASH_START) " +${filesize} && "\
+ "cp.b ${load_addr_r} " __stringify(BOOTFLASH_START) \
" ${filesize} && " \
- "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \
+ "protect on " __stringify(BOOTFLASH_START) " +${filesize}\0"\
""
#endif /* __CONFIG_KEYMILE_POWERPC_H */
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 44d5373..549278d 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -91,7 +91,7 @@
#define CONFIG_KM_DEF_ENV_CPU \
"boot=bootm ${load_addr_r} - -\0" \
"cramfsloadfdt=true\0" \
- "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.kwb\0" \
+ "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \
CONFIG_KM_UPDATE_UBOOT \
""
@@ -271,16 +271,16 @@
#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_NEW_ENV \
"newenv=sf probe 0;" \
- "sf erase " xstr(CONFIG_ENV_OFFSET) " " \
- xstr(CONFIG_ENV_TOTAL_SIZE)"\0"
+ "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \
+ __stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
#else
#define CONFIG_KM_NEW_ENV \
"newenv=setenv addr 0x100000 && " \
"i2c dev 1; mw.b ${addr} 0 4 && " \
- "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
- " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \
- "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
- " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"
+ "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
+ " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \
+ "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
+ " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
#endif
/*