85xx: Add PORDEVSR_PCI1 define
Add define used to determine if PCI1 interface is in PCI or PCIX mode.
Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index ba6bff5..c562fc9 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -332,7 +332,7 @@
first_free_busno=hose->last_busno+1;
printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
#ifdef CONFIG_PCIX_CHECK
- if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
/* PCI-X init */
if (CONFIG_SYS_CLK_FREQ < 66000000)
printf("PCI-X will only work at 66 MHz\n");
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 017f6b3..8c073cb 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -412,7 +412,7 @@
first_free_busno=hose->last_busno+1;
printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
#ifdef CONFIG_PCIX_CHECK
- if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
/* PCI-X init */
if (CONFIG_SYS_CLK_FREQ < 66000000)
printf("PCI-X will only work at 66 MHz\n");
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index 3a828ed..73f1d01 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -610,7 +610,7 @@
first_free_busno = hose->last_busno + 1;
#ifdef CONFIG_PCIX_CHECK
- if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
ushort reg16 =
PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 112f18c..787c6eb 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -70,7 +70,7 @@
*/
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
/* PCI-X init */
if (CONFIG_SYS_CLK_FREQ < 66000000)
printf("PCI-X will only work at 66 MHz\n");
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 75b451d..e5046be 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1569,6 +1569,7 @@
#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
#define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000
+#define MPC85xx_PORDEVSR_PCI1 0x00800000
#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
@@ -1647,8 +1648,6 @@
char res15[61648]; /* 0xe0f30 to 0xefffff */
} ccsr_gur_t;
-#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
-
#define CONFIG_SYS_MPC85xx_GUTS_OFFSET (0xE0000)
#define CONFIG_SYS_MPC85xx_GUTS_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
#define CONFIG_SYS_MPC85xx_ECM_OFFSET (0x0000)