drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig
NXP layerscape platforms like ls1088a, ls2088a
uses MXC I2C Controller.
-Remove dependency of MX6 for the same.
Update related configs to use Kconfig file.
-Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig
-Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig
-Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 932abd3..cc9fa96 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -149,13 +149,96 @@
both 7-bit and 10-bit addresses.
config SYS_I2C_MXC
- bool "NXP i.MX I2C driver"
- depends on MX6
+ bool "NXP MXC I2C driver"
help
- Add support for the NXP i.MX I2C driver. This supports upto for bus
+ Add support for the NXP I2C driver. This supports upto for bus
channels and operating on standard mode upto 100 kbits/s and fast
mode upto 400 kbits/s.
+if SYS_I2C_MXC
+config SYS_I2C_MXC_I2C1
+ bool "NXP MXC I2C1"
+ help
+ Add support for NXP MXC I2C Controller 1.
+ Required for SoCs which have I2C MXC controller 1 eg LS1088A, LS2080A
+
+config SYS_I2C_MXC_I2C2
+ bool "NXP MXC I2C2"
+ help
+ Add support for NXP MXC I2C Controller 2.
+ Required for SoCs which have I2C MXC controller 2 eg LS1088A, LS2080A
+
+config SYS_I2C_MXC_I2C3
+ bool "NXP MXC I2C3"
+ help
+ Add support for NXP MXC I2C Controller 3.
+ Required for SoCs which have I2C MXC controller 3 eg LS1088A, LS2080A
+
+config SYS_I2C_MXC_I2C4
+ bool "NXP MXC I2C4"
+ help
+ Add support for NXP MXC I2C Controller 4.
+ Required for SoCs which have I2C MXC controller 4 eg LS1088A, LS2080A
+endif
+
+if SYS_I2C_MXC_I2C1
+config SYS_MXC_I2C1_SPEED
+ int "I2C Channel 1 speed"
+ default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+ default 100000
+ help
+ MXC I2C Channel 1 speed
+
+config SYS_MXC_I2C1_SLAVE
+ int "I2C1 Slave"
+ default 0
+ help
+ MXC I2C1 Slave
+endif
+
+if SYS_I2C_MXC_I2C2
+config SYS_MXC_I2C2_SPEED
+ int "I2C Channel 2 speed"
+ default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+ default 100000
+ help
+ MXC I2C Channel 2 speed
+
+config SYS_MXC_I2C2_SLAVE
+ int "I2C2 Slave"
+ default 0
+ help
+ MXC I2C2 Slave
+endif
+
+if SYS_I2C_MXC_I2C3
+config SYS_MXC_I2C3_SPEED
+ int "I2C Channel 3 speed"
+ default 100000
+ help
+ MXC I2C Channel 3 speed
+
+config SYS_MXC_I2C3_SLAVE
+ int "I2C3 Slave"
+ default 0
+ help
+ MXC I2C3 Slave
+endif
+
+if SYS_I2C_MXC_I2C4
+config SYS_MXC_I2C4_SPEED
+ int "I2C Channel 4 speed"
+ default 100000
+ help
+ MXC I2C Channel 4 speed
+
+config SYS_MXC_I2C4_SLAVE
+ int "I2C4 Slave"
+ default 0
+ help
+ MXC I2C4 Slave
+endif
+
config SYS_I2C_OMAP24XX
bool "TI OMAP2+ I2C driver"
depends on ARCH_OMAP2PLUS