board: common: vid: Move IR chip specific code in flag
Moves IR chip (IR36021) specific code in flag to resolve
compilation issue where it is not present. For example,
LS1088A is having a new LTC3882 voltage chip.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 89904c1..f68068e 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -41,6 +41,8 @@
return 0;
}
+#if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
+ defined(CONFIG_VOL_MONITOR_IR36021_READ)
/*
* Get the i2c address configuration for the IR regulator chip
*
@@ -73,6 +75,7 @@
}
return -1;
}
+#endif
/* Maximum loop count waiting for new voltage to take effect */
#define MAX_LOOP_WAIT_NEW_VOL 100
@@ -184,6 +187,7 @@
return voltage_read;
}
+#ifdef CONFIG_VOL_MONITOR_IR36021_SET
/*
* We need to calculate how long before the voltage stops to drop
* or increase. It returns with the loop count. Each loop takes
@@ -243,7 +247,6 @@
return vdd_current;
}
-#ifdef CONFIG_VOL_MONITOR_IR36021_SET
/* Set the voltage to the IR chip */
static int set_voltage_to_IR(int i2caddress, int vdd)
{
@@ -298,7 +301,12 @@
int re_enable = disable_interrupts();
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 fusesr;
+#if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
+ defined(CONFIG_VOL_MONITOR_IR36021_READ)
u8 vid, buf;
+#else
+ u8 vid;
+#endif
int vdd_target, vdd_current, vdd_last;
int ret, i2caddress;
unsigned long vdd_string_override;
@@ -386,6 +394,8 @@
ret = -1;
goto exit;
}
+#if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
+ defined(CONFIG_VOL_MONITOR_IR36021_READ)
ret = find_ir_chip_on_i2c();
if (ret < 0) {
printf("VID: Could not find voltage regulator on I2C.\n");
@@ -410,6 +420,7 @@
ret = -1;
goto exit;
}
+#endif
/* get the voltage ID from fuse status register */
fusesr = in_le32(&gur->dcfg_fusesr);
@@ -549,6 +560,8 @@
ret = -1;
goto exit;
}
+#if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
+ defined(CONFIG_VOL_MONITOR_IR36021_READ)
ret = find_ir_chip_on_i2c();
if (ret < 0) {
printf("VID: Could not find voltage regulator on I2C.\n");
@@ -573,6 +586,7 @@
ret = -1;
goto exit;
}
+#endif
/* get the voltage ID from fuse status register */
fusesr = in_be32(&gur->dcfg_fusesr);
@@ -683,6 +697,8 @@
debug("VID : I2c failed to switch channel\n");
return -1;
}
+#if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
+ defined(CONFIG_VOL_MONITOR_IR36021_READ)
ret = find_ir_chip_on_i2c();
if (ret < 0) {
printf("VID: Could not find voltage regulator on I2C.\n");
@@ -691,6 +707,7 @@
i2caddress = ret;
debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress);
}
+#endif
/*
* Read voltage monitor to check real voltage.