spi: ti_qspi: Fix baudrate divider calculation

Fix the divider calculation logic to choose a value so that the
resulting baudrate is either equal to or closest possible baudrate less
than the requested value. While at that, cleanup ti_spi_set_speed().

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 52520df..da04886 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -16,6 +16,7 @@
 #include <asm/omap_gpio.h>
 #include <asm/omap_common.h>
 #include <asm/ti-common/ti-edma3.h>
+#include <linux/kernel.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -118,21 +119,18 @@
 	if (!hz)
 		clk_div = 0;
 	else
-		clk_div = (priv->fclk / hz) - 1;
+		clk_div = DIV_ROUND_UP(priv->fclk, hz) - 1;
+
+	/* truncate clk_div value to QSPI_CLK_DIV_MAX */
+	if (clk_div > QSPI_CLK_DIV_MAX)
+		clk_div = QSPI_CLK_DIV_MAX;
 
 	debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
 
 	/* disable SCLK */
 	writel(readl(&priv->base->clk_ctrl) & ~QSPI_CLK_EN,
 	       &priv->base->clk_ctrl);
-
-	/* assign clk_div values */
-	if (clk_div < 0)
-		clk_div = 0;
-	else if (clk_div > QSPI_CLK_DIV_MAX)
-		clk_div = QSPI_CLK_DIV_MAX;
-
-	/* enable SCLK */
+	/* enable SCLK and program the clk divider */
 	writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
 }