Revert "arm: Remove unregister MACH_TYPE_xxx uses"
This reverts commit 70b26cd057f42c7126088b49d4285955c8a00eae.
This is not a strict revert as it is easier to fix
board/atmark-techno/armadillo-800eva/armadillo-800eva.c to now the
correct name (same value) than to revert that change too.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c
index ad8245a..1f4fb92 100644
--- a/board/Seagate/goflexhome/goflexhome.c
+++ b/board/Seagate/goflexhome/goflexhome.c
@@ -92,6 +92,11 @@
int board_init(void)
{
+ /*
+ * arch number of board
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_GOFLEXHOME;
+
/* address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
diff --git a/board/atmark-techno/armadillo-800eva/armadillo-800eva.c b/board/atmark-techno/armadillo-800eva/armadillo-800eva.c
index 0227d70..abe69ab 100644
--- a/board/atmark-techno/armadillo-800eva/armadillo-800eva.c
+++ b/board/atmark-techno/armadillo-800eva/armadillo-800eva.c
@@ -271,6 +271,8 @@
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
+ /* board id for linux */
+ gd->bd->bi_arch_number = MACH_TYPE_ARMADILLO800EVA;
/* adress of boot parameters */
gd->bd->bi_boot_params = ARMADILLO_800EVA_SDRAM_BASE + 0x100;
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 6493122..b0d440d 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -256,6 +256,9 @@
int board_init(void)
{
+ /* arch number of AT91SAM9X5EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
+
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index 4a34c1a..3ce1992 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -175,6 +175,9 @@
irq_init();
#endif
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_LCDK;
+
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index 30e4c7d..66804d7 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -277,6 +277,9 @@
int board_init(void)
{
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_EA20;
+
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
diff --git a/board/mini-box/picosam9g45/picosam9g45.c b/board/mini-box/picosam9g45/picosam9g45.c
index 8a4a392..32ba9c6 100644
--- a/board/mini-box/picosam9g45/picosam9g45.c
+++ b/board/mini-box/picosam9g45/picosam9g45.c
@@ -252,6 +252,8 @@
int board_init(void)
{
+ gd->bd->bi_arch_number = MACH_TYPE_PICOSAM9G45;
+
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index d84ec57..b5d5ba9 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -138,6 +138,7 @@
int board_init(void)
{
gpmc_init();
+ gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM;
gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init);