arm: mvebu: turris_mox: Extend to support RIPE Atlas Probe
Extend Turris Mox board code to support CZ.NIC's RIPE Atlas Probe.
Signed-off-by: Marek BehĂșn <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7007997..55aceb5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -322,6 +322,7 @@
dtb-$(CONFIG_ARCH_MVEBU) += \
armada-3720-db.dtb \
armada-3720-espressobin.dtb \
+ armada-3720-ripe-atlas.dtb \
armada-3720-turris-mox.dtb \
armada-3720-eDPU.dtb \
armada-3720-uDPU.dtb \
diff --git a/arch/arm/dts/armada-3720-ripe-atlas.dts b/arch/arm/dts/armada-3720-ripe-atlas.dts
new file mode 100644
index 0000000..4457845
--- /dev/null
+++ b/arch/arm/dts/armada-3720-ripe-atlas.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Device Tree file for CZ.NIC' RIPE Atlas Probe
+ * 2021 by Marek Behún <marek.behun@nic.cz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "CZ.NIC's RIPE Atlas Probe";
+ compatible = "cznic,ripe-atlas", "marvell,armada3720",
+ "marvell,armada3710";
+
+ aliases {
+ ethernet0 = ð0;
+ mmc0 = &sdhci0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_ACTIVITY;
+ };
+ };
+
+ vsdc_reg: vsdc-reg {
+ compatible = "regulator-gpio";
+ regulator-name = "vsdc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+};
+
+&comphy {
+ status = "disabled";
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smi_pins>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ non-removable;
+ vqmmc-supply = <&vsdc_reg>;
+ marvell,pad-type = "sd";
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 5c7f4bf..c80d858 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -144,8 +144,12 @@
select ATSHA204A
config TARGET_TURRIS_MOX
- bool "Support Turris Mox"
+ bool "Support CZ.NIC's Turris Mox / RIPE Atlas Probe"
select ARMADA_3700
+ select BOARD_TYPES
+ select ENV_IS_IN_MMC
+ select ENV_IS_IN_SPI_FLASH
+ select MULTI_DTB_FIT
config TARGET_MVEBU_ARMADA_8K
bool "Support Armada 7k/8k platforms"