Merge with /home/wd/git/u-boot/master
Code cleanup.
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index 7e5a1ee..9541c9b 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -6,8 +6,8 @@
* Copyright (C) 2000 Wolfgang Denk <wd@denx.de>
* Copyright (C) 2001 Alex Zuepke <azu@sysgo.de>
* Copyright (C) 2002 Kyle Harris <kharris@nexus-tech.net>
- * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * Copyright (C) 2003 Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
+ * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ * Copyright (C) 2003 Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -117,13 +117,13 @@
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* don't reloc during debug */
- beq stack_setup
+ cmp r0, r1 /* don't reloc during debug */
+ beq stack_setup
ldr r2, _armboot_start
ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r3-r10} /* copy from source address [r0] */
@@ -135,19 +135,19 @@
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
- sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
- sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
sub sp, r0, #12 /* leave 3 words for abort-stack */
clear_bss:
- ldr r0, _bss_start /* find start of bss segment */
- ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
+ ldr r0, _bss_start /* find start of bss segment */
+ ldr r1, _bss_end /* stop here */
+ mov r2, #0x00000000 /* clear */
-clbss_l:str r2, [r0] /* clear loop... */
+clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
cmp r0, r1
ble clbss_l
@@ -173,8 +173,8 @@
#undef OWER
#undef OIER
#endif
-
-/* Interrupt-Controller base address */
+
+/* Interrupt-Controller base address */
IC_BASE: .word 0x40d00000
#define ICMR 0x04
@@ -189,7 +189,7 @@
#define OWER 0x18
#define OIER 0x1C
-/* Clock Manager Registers */
+/* Clock Manager Registers */
#ifdef CFG_CPUSPEED
CC_BASE: .word 0x41300000
#define CCCR 0x00
@@ -197,7 +197,6 @@
#else
#error "You have to define CFG_CPUSPEED!!"
#endif
-
/* takes care the CP15 update has taken place */
.macro CPWAIT reg
@@ -206,40 +205,36 @@
sub pc,pc,#4
.endm
-
cpu_init_crit:
/* mask all IRQs */
#ifndef CONFIG_CPU_MONAHANS
-
ldr r0, IC_BASE
mov r1, #0x00
str r1, [r0, #ICMR]
#else
/* Step 1 - Enable CP6 permission */
- mrc p15, 0, r1, c15, c1, 0 @ read CPAR
- orr r1, r1, #0x40
- mcr p15, 0, r1, c15, c1, 0
- CPWAIT r1
+ mrc p15, 0, r1, c15, c1, 0 @ read CPAR
+ orr r1, r1, #0x40
+ mcr p15, 0, r1, c15, c1, 0
+ CPWAIT r1
- /* Step 2 - Mask ICMR & ICMR2 */
- mov r1, #0
- mcr p6, 0, r1, c1, c0, 0 @ ICMR
- mcr p6, 0, r1, c7, c0, 0 @ ICMR2
+ /* Step 2 - Mask ICMR & ICMR2 */
+ mov r1, #0
+ mcr p6, 0, r1, c1, c0, 0 @ ICMR
+ mcr p6, 0, r1, c7, c0, 0 @ ICMR2
/* turn off all clocks but the ones we will definitly require */
- ldr r1, =CKENA
- ldr r2, =(CKENA_22_FFUART | CKENA_10_SRAM | CKENA_9_SMC | CKENA_8_DMC)
- str r2, [r1]
- ldr r1, =CKENB
- ldr r2, =(CKENB_6_IRQ)
- str r2, [r1]
-
+ ldr r1, =CKENA
+ ldr r2, =(CKENA_22_FFUART | CKENA_10_SRAM | CKENA_9_SMC | CKENA_8_DMC)
+ str r2, [r1]
+ ldr r1, =CKENB
+ ldr r2, =(CKENB_6_IRQ)
+ str r2, [r1]
#endif
#ifndef CONFIG_CPU_MONAHANS
#ifdef CFG_CPUSPEED
-
/* set clock speed tbd@mk: required for monahans? */
ldr r0, CC_BASE
ldr r1, cpuspeed
@@ -248,10 +243,9 @@
mcr p14, 0, r0, c6, c0, 0
setspeed_done:
-
+
#endif /* CFG_CPUSPEED */
#endif /* CONFIG_CPU_MONAHANS */
-
/*
* before relocating, we have to setup RAM timing
@@ -263,7 +257,7 @@
mov lr, ip
/* Memory interfaces are working. Disable MMU and enable I-cache. */
- /* mk: hmm, this is not in the monahans docs, leave it now but
+ /* mk: hmm, this is not in the monahans docs, leave it now but
* check here if it doesn't work :-) */
ldr r0, =0x2001 /* enable access to all coproc. */
@@ -330,7 +324,7 @@
ldr r2, _armboot_start
sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
- sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
@@ -457,17 +451,17 @@
#endif
/****************************************************************************/
-/* */
+/* */
/* Reset function: the PXA250 doesn't have a reset function, so we have to */
-/* perform a watchdog timeout for a soft reset. */
-/* */
+/* perform a watchdog timeout for a soft reset. */
+/* */
/****************************************************************************/
.align 5
.globl reset_cpu
- /* FIXME: this code is PXA250 specific. How is this handled on */
- /* other XScale processors? */
+ /* FIXME: this code is PXA250 specific. How is this handled on */
+ /* other XScale processors? */
reset_cpu:
@@ -475,13 +469,13 @@
ldr r0, OSTIMER_BASE
ldr r1, [r0, #OWER]
- orr r1, r1, #0x0001 /* bit0: WME */
+ orr r1, r1, #0x0001 /* bit0: WME */
str r1, [r0, #OWER]
/* OS timer does only wrap every 1165 seconds, so we have to set */
- /* the match register as well. */
+ /* the match register as well. */
- ldr r1, [r0, #OSCR] /* read OS timer */
+ ldr r1, [r0, #OSCR] /* read OS timer */
add r1, r1, #0x800 /* let OSMR3 match after */
add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */
str r1, [r0, #OSMR3]