ppc4xx: Convert PPC4xx UIC defines from lower case to upper case
The latest PPC4xx register cleanup patch missed the UIC defines.
This patch now changes lower case UIC defines to upper case.
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 0db6199..4825611 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -78,12 +78,12 @@
mfsdr(SDR0_ULTRA1, reg);
mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE);
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000010);
- mtdcr(uicpr, 0xFE7FFFF0); /* set int polarities */
- mtdcr(uictr, 0x00000010); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000010);
+ mtdcr(UIC0PR, 0xFE7FFFF0); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 2ffd720..38186a5 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -392,21 +392,21 @@
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
/*--------------------------------------------------------------------
* Setup the GPIO pins
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
index d0aebec..49eadb9 100644
--- a/board/amcc/bubinga/bubinga.c
+++ b/board/amcc/bubinga/bubinga.c
@@ -29,12 +29,12 @@
int board_early_init_f(void)
{
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000010);
- mtdcr(uicpr, 0xFFFF7FF0); /* set int polarities */
- mtdcr(uictr, 0x00000010); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000010);
+ mtdcr(UIC0PR, 0xFFFF7FF0); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* Configure CPC0_PCI to enable PerWE as output
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 3a03f30..f359d23 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -116,37 +116,37 @@
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
- mtdcr(uic3sr, 0xffffffff); /* clear all */
- mtdcr(uic3er, 0x00000000); /* disable all */
- mtdcr(uic3cr, 0x00000000); /* all non-critical */
- mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic3tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic3sr, 0xffffffff); /* clear all */
+ mtdcr(UIC3SR, 0xffffffff); /* clear all */
+ mtdcr(UIC3ER, 0x00000000); /* disable all */
+ mtdcr(UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC3SR, 0xffffffff); /* clear all */
#if !defined(CONFIG_ARCHES)
/* SDR Setting - enable NDFC */
diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
index 2439b03..0543bad 100644
--- a/board/amcc/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -71,21 +71,21 @@
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
return 0;
}
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 1a45056..bcef707 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -183,42 +183,42 @@
* Set critical interrupt values. Set interrupt polarities. Set interrupt
* trigger levels. Make bit 0 High priority. Clear all interrupts again.
*------------------------------------------------------------------------*/
- mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic3er, 0x00000000); /* disable all interrupts */
- mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical interrupts: */
- mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities*/
- mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
- mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic3sr, 0x00000000); /* clear all interrupts*/
- mtdcr (uic3sr, 0xffffffff); /* clear all interrupts*/
+ mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical interrupts: */
+ mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities*/
+ mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC3SR, 0x00000000); /* clear all interrupts*/
+ mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts*/
- mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic2er, 0x00000000); /* disable all interrupts*/
- mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts*/
- mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities*/
- mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
- mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts*/
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts*/
+ mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities*/
+ mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts*/
- mtdcr (uic1er, 0x00000000); /* disable all interrupts*/
- mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts*/
- mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels*/
- mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic1sr, 0x00000000); /* clear all interrupts*/
- mtdcr (uic1sr, 0xffffffff); /* clear all interrupts*/
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts*/
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts*/
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts*/
+ mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels*/
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts*/
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts*/
- mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted cascade to be checked */
- mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical interrupts*/
- mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities*/
- mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */
- mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic0sr, 0x00000000); /* clear all interrupts*/
- mtdcr (uic0sr, 0xffffffff); /* clear all interrupts*/
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted cascade to be checked */
+ mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical interrupts*/
+ mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities*/
+ mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts*/
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts*/
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
index 7e84a61..5ebe692 100644
--- a/board/amcc/kilauea/kilauea.c
+++ b/board/amcc/kilauea/kilauea.c
@@ -158,33 +158,33 @@
| interrupts again.
+-------------------------------------------------------------------*/
- mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic2er, 0x00000000); /* disable all interrupts */
- mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic2pr, 0xf7ffffff); /* Set Interrupt Polarities */
- mtdcr (uic2tr, 0x01e1fff8); /* Set Interrupt Trigger Levels */
- mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic1er, 0x00000000); /* disable all interrupts */
- mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic1pr, 0xfffac785); /* Set Interrupt Polarities */
- mtdcr (uic1tr, 0x001d0040); /* Set Interrupt Trigger Levels */
- mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic0er, 0x0000000a); /* Disable all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */
/* Except cascade UIC0 and UIC1 */
- mtdcr (uic0cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic0pr, 0xffbfefef); /* Set Interrupt Polarities */
- mtdcr (uic0tr, 0x00007000); /* Set Interrupt Trigger Levels */
- mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */
+ mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */
/*
* Note: Some cores are still in reset when the chip starts, so
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 71ad89f..5f76672 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -49,23 +49,23 @@
mtebc( PB2AP, 0x03800000 );
mtebc( PB2CR, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */
- mtdcr( uic1sr, 0xffffffff ); /* Clear all interrupts */
- mtdcr( uic1er, 0x00000000 ); /* disable all interrupts */
- mtdcr( uic1cr, 0x00000000 ); /* Set Critical / Non Critical interrupts */
- mtdcr( uic1pr, 0x7fff83ff ); /* Set Interrupt Polarities */
- mtdcr( uic1tr, 0x001f8000 ); /* Set Interrupt Trigger Levels */
- mtdcr( uic1vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
- mtdcr( uic1sr, 0x00000000 ); /* clear all interrupts */
- mtdcr( uic1sr, 0xffffffff );
+ mtdcr( UIC1SR, 0xffffffff ); /* Clear all interrupts */
+ mtdcr( UIC1ER, 0x00000000 ); /* disable all interrupts */
+ mtdcr( UIC1CR, 0x00000000 ); /* Set Critical / Non Critical interrupts */
+ mtdcr( UIC1PR, 0x7fff83ff ); /* Set Interrupt Polarities */
+ mtdcr( UIC1TR, 0x001f8000 ); /* Set Interrupt Trigger Levels */
+ mtdcr( UIC1VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr( UIC1SR, 0x00000000 ); /* clear all interrupts */
+ mtdcr( UIC1SR, 0xffffffff );
- mtdcr( uic0sr, 0xffffffff ); /* Clear all interrupts */
- mtdcr( uic0er, 0x00000000 ); /* disable all interrupts excepted cascade */
- mtdcr( uic0cr, 0x00000001 ); /* Set Critical / Non Critical interrupts */
- mtdcr( uic0pr, 0xffffffff ); /* Set Interrupt Polarities */
- mtdcr( uic0tr, 0x01000004 ); /* Set Interrupt Trigger Levels */
- mtdcr( uic0vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
- mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */
- mtdcr( uic0sr, 0xffffffff );
+ mtdcr( UIC0SR, 0xffffffff ); /* Clear all interrupts */
+ mtdcr( UIC0ER, 0x00000000 ); /* disable all interrupts excepted cascade */
+ mtdcr( UIC0CR, 0x00000001 ); /* Set Critical / Non Critical interrupts */
+ mtdcr( UIC0PR, 0xffffffff ); /* Set Interrupt Polarities */
+ mtdcr( UIC0TR, 0x01000004 ); /* Set Interrupt Trigger Levels */
+ mtdcr( UIC0VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr( UIC0SR, 0x00000000 ); /* clear all interrupts */
+ mtdcr( UIC0SR, 0xffffffff );
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
index 9fc0ec6..fb0e7b7 100644
--- a/board/amcc/makalu/makalu.c
+++ b/board/amcc/makalu/makalu.c
@@ -159,33 +159,33 @@
| interrupts again.
+-------------------------------------------------------------------*/
- mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic2er, 0x00000000); /* disable all interrupts */
- mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic2pr, 0xf7ffffff); /* Set Interrupt Polarities */
- mtdcr (uic2tr, 0x01e1fff8); /* Set Interrupt Trigger Levels */
- mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic1er, 0x00000000); /* disable all interrupts */
- mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic1pr, 0xfffac785); /* Set Interrupt Polarities */
- mtdcr (uic1tr, 0x001d0040); /* Set Interrupt Trigger Levels */
- mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic0er, 0x0000000a); /* Disable all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */
/* Except cascade UIC0 and UIC1 */
- mtdcr (uic0cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic0pr, 0xffbfefef); /* Set Interrupt Polarities */
- mtdcr (uic0tr, 0x00007000); /* Set Interrupt Trigger Levels */
- mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */
+ mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */
/*
* Note: Some cores are still in reset when the chip starts, so
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 5e32e8a..8513f43 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -159,36 +159,36 @@
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic1pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic1tr, 0x01c00008); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000); /* */
- mtdcr (uic0tr, 0x00000000); /* */
- mtdcr (uic0vr, 0x00000001); /* */
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000); /* */
+ mtdcr (UIC0TR, 0x00000000); /* */
+ mtdcr (UIC0VR, 0x00000001); /* */
mfsdr (SDR0_MFR, mfr);
mfr &= ~SDR0_MFR_ECS_MASK;
/* mtsdr(SDR0_MFR, mfr); */
diff --git a/board/amcc/redwood/redwood.c b/board/amcc/redwood/redwood.c
index 49078eb..bc8cb0c 100644
--- a/board/amcc/redwood/redwood.c
+++ b/board/amcc/redwood/redwood.c
@@ -416,41 +416,41 @@
* interrupt trigger levels. Make bit 0 High priority. Clear all
* interrupts again.
*/
- mtdcr(uic3sr, 0xffffffff); /* Clear all interrupts */
- mtdcr(uic3er, 0x00000000); /* disable all interrupts */
- mtdcr(uic3cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */
+ mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr(uic3pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr(uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
- mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic3sr, 0xffffffff); /* clear all interrupts */
+ mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts */
- mtdcr(uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr(uic2er, 0x00000000); /* disable all interrupts */
- mtdcr(uic2cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr(uic2pr, 0xebebebff); /* Set Interrupt Polarities */
- mtdcr(uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all interrupts */
+ mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities */
+ mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */
- mtdcr(uic1sr, 0xffffffff); /* Clear all interrupts */
- mtdcr(uic1er, 0x00000000); /* disable all interrupts */
- mtdcr(uic1cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr(uic1pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr(uic1tr, 0x001fc0ff); /* Set Interrupt Trigger Levels */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all interrupts */
+ mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr(UIC1TR, 0x001fc0ff); /* Set Interrupt Trigger Levels */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */
- mtdcr(uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr(uic0er, 0x00000000); /* disable all interrupts excepted
+ mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr(UIC0ER, 0x00000000); /* disable all interrupts excepted
* cascade to be checked */
- mtdcr(uic0cr, 0x00104001); /* Set Critical / Non Critical
+ mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical
* interrupts */
- mtdcr(uic0pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr(uic0tr, 0x000f003c); /* Set Interrupt Trigger Levels */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all interrupts */
+ mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr(UIC0TR, 0x000f003c); /* Set Interrupt Trigger Levels */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */
}
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 5913455..17f831c 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -52,29 +52,29 @@
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
- mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
/* 50MHz tmrclk */
out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x04, 0x00);
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index 4e5796e..be381d6 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -40,13 +40,13 @@
{
lcd_init();
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000);
- mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */
- mtdcr(uictr, 0x00000000); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000);
+ mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */
mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c
index 086778a..4a0573e 100644
--- a/board/amcc/taishan/taishan.c
+++ b/board/amcc/taishan/taishan.c
@@ -132,36 +132,36 @@
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic1pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic1tr, 0x01c00008); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000); /* */
- mtdcr (uic0tr, 0x00000000); /* */
- mtdcr (uic0vr, 0x00000001); /* */
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000); /* */
+ mtdcr (UIC0TR, 0x00000000); /* */
+ mtdcr (UIC0VR, 0x00000001); /* */
/* Enable two GPIO 10~11 and TraceA signal */
mfsdr(SDR0_PFC0,reg);
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
index 28dcb66..4f29932 100644
--- a/board/amcc/walnut/walnut.c
+++ b/board/amcc/walnut/walnut.c
@@ -47,13 +47,13 @@
|
+-------------------------------------------------------------------------*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
- mtdcr(uicpr, 0xFFFFFFE0); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */
+ mtdcr(UIC0PR, 0xFFFFFFE0); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/* set UART1 control to select CTS/RTS */
#define FPGA_BRDC 0xF0300004
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 2a654fa..731d441 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -82,21 +82,21 @@
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
/*--------------------------------------------------------------------
* Setup other serial configuration
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index 245004c..033bdd2 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -485,50 +485,50 @@
| interrupt trigger levels. Make bit 0 High priority. Clear all
| interrupts again.
+-------------------------------------------------------------------*/
- mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic3er, 0x00000000); /* disable all interrupts */
- mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
- mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest
* priority */
- mtdcr (uic3sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic3sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC3SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic2er, 0x00000000); /* disable all interrupts */
- mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities */
- mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
- mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities */
+ mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest
* priority */
- mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic1er, 0x00000000); /* disable all interrupts */
- mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels */
- mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest
* priority */
- mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted
* cascade to be checked */
- mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical
+ mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical
* interrupts */
- mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */
- mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest
* priority */
- mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */