net: Add IPQ40xx MDIO driver
This adds the driver for the IPQ40xx built-in MDIO.
This will be needed to support future PHY driver.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
diff --git a/MAINTAINERS b/MAINTAINERS
index d5a418d..a80045f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -242,6 +242,7 @@
F: drivers/reset/reset-ipq4019.c
F: drivers/phy/phy-qcom-ipq4019-usb.c
F: drivers/spi/spi-qup.c
+F: drivers/net/mdio-ipq4019.c
ARM MARVELL KIRKWOOD ARMADA-XP ARMADA-38X ARMADA-37XX ARMADA-7K/8K
M: Stefan Roese <sr@denx.de>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2beec2d..3a5e036 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -732,6 +732,13 @@
an I2C chip. The board it was developed for uses a mux controlled by
on-board FPGA which in turn is accessed as a chip over I2C.
+config MDIO_IPQ4019
+ bool "Qualcomm IPQ4019 MDIO interface support"
+ depends on DM_MDIO
+ help
+ This driver supports the MDIO interface found in Qualcomm
+ IPQ40xx series Soc-s.
+
config MVMDIO
bool "Marvell MDIO interface support"
depends on DM_MDIO
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 9f7a79e..e3bdda3 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -40,6 +40,7 @@
obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
+obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o
obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o
obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o
obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o
diff --git a/drivers/net/mdio-ipq4019.c b/drivers/net/mdio-ipq4019.c
new file mode 100644
index 0000000..bc68e1d
--- /dev/null
+++ b/drivers/net/mdio-ipq4019.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm IPQ4019 MDIO driver
+ *
+ * Copyright (c) 2020 Sartura Ltd.
+ *
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *
+ * Based on Linux driver
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <linux/bitops.h>
+#include <linux/iopoll.h>
+#include <miiphy.h>
+#include <phy.h>
+
+#define MDIO_MODE_REG 0x40
+#define MDIO_ADDR_REG 0x44
+#define MDIO_DATA_WRITE_REG 0x48
+#define MDIO_DATA_READ_REG 0x4c
+#define MDIO_CMD_REG 0x50
+#define MDIO_CMD_ACCESS_BUSY BIT(16)
+#define MDIO_CMD_ACCESS_START BIT(8)
+#define MDIO_CMD_ACCESS_CODE_READ 0
+#define MDIO_CMD_ACCESS_CODE_WRITE 1
+
+/* 0 = Clause 22, 1 = Clause 45 */
+#define MDIO_MODE_BIT BIT(8)
+
+#define IPQ4019_MDIO_TIMEOUT 10000
+#define IPQ4019_MDIO_SLEEP 10
+
+struct ipq4019_mdio_priv {
+ phys_addr_t mdio_base;
+};
+
+static int ipq4019_mdio_wait_busy(struct ipq4019_mdio_priv *priv)
+{
+ unsigned int busy;
+
+ return readl_poll_sleep_timeout(priv->mdio_base + MDIO_CMD_REG, busy,
+ (busy & MDIO_CMD_ACCESS_BUSY) == 0, IPQ4019_MDIO_SLEEP,
+ IPQ4019_MDIO_TIMEOUT);
+}
+
+int ipq4019_mdio_read(struct udevice *dev, int addr, int devad, int reg)
+{
+ struct ipq4019_mdio_priv *priv = dev_get_priv(dev);
+ unsigned int cmd;
+
+ if (ipq4019_mdio_wait_busy(priv))
+ return -ETIMEDOUT;
+
+ /* Issue the phy address and reg */
+ writel((addr << 8) | reg, priv->mdio_base + MDIO_ADDR_REG);
+
+ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ;
+
+ /* Issue read command */
+ writel(cmd, priv->mdio_base + MDIO_CMD_REG);
+
+ /* Wait read complete */
+ if (ipq4019_mdio_wait_busy(priv))
+ return -ETIMEDOUT;
+
+ /* Read and return data */
+ return readl(priv->mdio_base + MDIO_DATA_READ_REG);
+}
+
+int ipq4019_mdio_write(struct udevice *dev, int addr, int devad,
+ int reg, u16 val)
+{
+ struct ipq4019_mdio_priv *priv = dev_get_priv(dev);
+ unsigned int cmd;
+
+ if (ipq4019_mdio_wait_busy(priv))
+ return -ETIMEDOUT;
+
+ /* Issue the phy addreass and reg */
+ writel((addr << 8) | reg, priv->mdio_base + MDIO_ADDR_REG);
+
+ /* Issue write data */
+ writel(val, priv->mdio_base + MDIO_DATA_WRITE_REG);
+
+ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE;
+
+ /* Issue write command */
+ writel(cmd, priv->mdio_base + MDIO_CMD_REG);
+
+ /* Wait for write complete */
+
+ if (ipq4019_mdio_wait_busy(priv))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static const struct mdio_ops ipq4019_mdio_ops = {
+ .read = ipq4019_mdio_read,
+ .write = ipq4019_mdio_write,
+};
+
+static int ipq4019_mdio_bind(struct udevice *dev)
+{
+ if (ofnode_valid(dev->node))
+ device_set_name(dev, ofnode_get_name(dev->node));
+
+ return 0;
+}
+
+static int ipq4019_mdio_probe(struct udevice *dev)
+{
+ struct ipq4019_mdio_priv *priv = dev_get_priv(dev);
+ unsigned int data;
+
+ priv->mdio_base = dev_read_addr(dev);
+ if (priv->mdio_base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ /* Enter Clause 22 mode */
+ data = readl(priv->mdio_base + MDIO_MODE_REG);
+ data &= ~MDIO_MODE_BIT;
+ writel(data, priv->mdio_base + MDIO_MODE_REG);
+
+ return 0;
+}
+
+static const struct udevice_id ipq4019_mdio_ids[] = {
+ { .compatible = "qcom,ipq4019-mdio", },
+ { }
+};
+
+U_BOOT_DRIVER(ipq4019_mdio) = {
+ .name = "ipq4019_mdio",
+ .id = UCLASS_MDIO,
+ .of_match = ipq4019_mdio_ids,
+ .bind = ipq4019_mdio_bind,
+ .probe = ipq4019_mdio_probe,
+ .ops = &ipq4019_mdio_ops,
+ .priv_auto_alloc_size = sizeof(struct ipq4019_mdio_priv),
+};