bdinfo: Rename function names to be clearer
At present we have bdinfo_print_num() to print unsigned long numbers.
We also have print_phys_addr() which accept numbers that might be
64-bit on a 32-bit platform.
Rename these 2 functions to be clearer:
bdinfo_print_num() => bdinfo_print_num_l()
print_phys_addr() => bdinfo_print_num_ll()
While we are here, make bdinfo_print_num_ll() public so that it can
be used outside cmd/bdinfo.c in the future.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
diff --git a/arch/arm/lib/bdinfo.c b/arch/arm/lib/bdinfo.c
index 25bc6e8..4a98cb7 100644
--- a/arch/arm/lib/bdinfo.c
+++ b/arch/arm/lib/bdinfo.c
@@ -15,23 +15,23 @@
{
struct bd_info *bd = gd->bd;
- bdinfo_print_num("arch_number", bd->bi_arch_number);
+ bdinfo_print_num_l("arch_number", bd->bi_arch_number);
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
- bdinfo_print_num("Secure ram",
- gd->arch.secure_ram &
- MEM_RESERVE_SECURE_ADDR_MASK);
+ bdinfo_print_num_l("Secure ram",
+ gd->arch.secure_ram &
+ MEM_RESERVE_SECURE_ADDR_MASK);
}
#endif
#ifdef CONFIG_RESV_RAM
if (gd->arch.resv_ram)
- bdinfo_print_num("Reserved ram", gd->arch.resv_ram);
+ bdinfo_print_num_l("Reserved ram", gd->arch.resv_ram);
#endif
#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
- bdinfo_print_num("TLB addr", gd->arch.tlb_addr);
+ bdinfo_print_num_l("TLB addr", gd->arch.tlb_addr);
#endif
- bdinfo_print_num("irq_sp", gd->irq_sp); /* irq stack pointer */
- bdinfo_print_num("sp start ", gd->start_addr_sp);
+ bdinfo_print_num_l("irq_sp", gd->irq_sp); /* irq stack pointer */
+ bdinfo_print_num_l("sp start ", gd->start_addr_sp);
/*
* TODO: Currently only support for davinci SOC's is added.
* Remove this check once all the board implement this.
diff --git a/arch/m68k/lib/bdinfo.c b/arch/m68k/lib/bdinfo.c
index 404e5f1..92ea175 100644
--- a/arch/m68k/lib/bdinfo.c
+++ b/arch/m68k/lib/bdinfo.c
@@ -38,7 +38,7 @@
bdinfo_print_mhz("busfreq", bd->bi_busfreq);
#if defined(CONFIG_SYS_MBAR)
- bdinfo_print_num("mbar", bd->bi_mbar_base);
+ bdinfo_print_num_l("mbar", bd->bi_mbar_base);
#endif
bdinfo_print_mhz("cpufreq", bd->bi_intfreq);
if (IS_ENABLED(CONFIG_PCI))
diff --git a/arch/powerpc/lib/bdinfo.c b/arch/powerpc/lib/bdinfo.c
index 36c9c99..b14e75b 100644
--- a/arch/powerpc/lib/bdinfo.c
+++ b/arch/powerpc/lib/bdinfo.c
@@ -47,9 +47,9 @@
bdinfo_print_mhz("busfreq", bd->bi_busfreq);
#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500)
- bdinfo_print_num("immr_base", bd->bi_immr_base);
+ bdinfo_print_num_l("immr_base", bd->bi_immr_base);
#endif
- bdinfo_print_num("bootflags", bd->bi_bootflags);
+ bdinfo_print_num_l("bootflags", bd->bi_bootflags);
bdinfo_print_mhz("intfreq", bd->bi_intfreq);
#ifdef CONFIG_ENABLE_36BIT_PHYS
if (IS_ENABLED(CONFIG_PHYS_64BIT))
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 8d8daa6..996546f 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -18,11 +18,16 @@
DECLARE_GLOBAL_DATA_PTR;
-void bdinfo_print_num(const char *name, ulong value)
+void bdinfo_print_num_l(const char *name, ulong value)
{
printf("%-12s= 0x%0*lx\n", name, 2 * (int)sizeof(value), value);
}
+void bdinfo_print_num_ll(const char *name, unsigned long long value)
+{
+ printf("%-12s= 0x%.*llx\n", name, 2 * (int)sizeof(ulong), value);
+}
+
static void print_eth(int idx)
{
char name[10], *val;
@@ -36,12 +41,6 @@
printf("%-12s= %s\n", name, val);
}
-static void print_phys_addr(const char *name, phys_addr_t value)
-{
- printf("%-12s= 0x%.*llx\n", name, 2 * (int)sizeof(ulong),
- (unsigned long long)value);
-}
-
void bdinfo_print_mhz(const char *name, unsigned long hz)
{
char buf[32];
@@ -55,9 +54,9 @@
for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) {
if (bd->bi_dram[i].size) {
- bdinfo_print_num("DRAM bank", i);
- bdinfo_print_num("-> start", bd->bi_dram[i].start);
- bdinfo_print_num("-> size", bd->bi_dram[i].size);
+ bdinfo_print_num_l("DRAM bank", i);
+ bdinfo_print_num_l("-> start", bd->bi_dram[i].start);
+ bdinfo_print_num_l("-> size", bd->bi_dram[i].size);
}
}
}
@@ -77,9 +76,10 @@
if (device_active(dev)) {
struct video_priv *upriv = dev_get_uclass_priv(dev);
- print_phys_addr("FB base", (ulong)upriv->fb);
+ bdinfo_print_num_ll("FB base", (ulong)upriv->fb);
if (upriv->copy_fb)
- print_phys_addr("FB copy", (ulong)upriv->copy_fb);
+ bdinfo_print_num_ll("FB copy",
+ (ulong)upriv->copy_fb);
printf("%-12s= %dx%dx%d\n", "FB size", upriv->xsize,
upriv->ysize, 1 << upriv->bpix);
}
@@ -91,36 +91,36 @@
struct bd_info *bd = gd->bd;
#ifdef DEBUG
- bdinfo_print_num("bd address", (ulong)bd);
+ bdinfo_print_num_l("bd address", (ulong)bd);
#endif
- bdinfo_print_num("boot_params", (ulong)bd->bi_boot_params);
+ bdinfo_print_num_l("boot_params", (ulong)bd->bi_boot_params);
print_bi_dram(bd);
if (IS_ENABLED(CONFIG_SYS_HAS_SRAM)) {
- bdinfo_print_num("sramstart", (ulong)bd->bi_sramstart);
- bdinfo_print_num("sramsize", (ulong)bd->bi_sramsize);
+ bdinfo_print_num_l("sramstart", (ulong)bd->bi_sramstart);
+ bdinfo_print_num_l("sramsize", (ulong)bd->bi_sramsize);
}
- bdinfo_print_num("flashstart", (ulong)bd->bi_flashstart);
- bdinfo_print_num("flashsize", (ulong)bd->bi_flashsize);
- bdinfo_print_num("flashoffset", (ulong)bd->bi_flashoffset);
+ bdinfo_print_num_l("flashstart", (ulong)bd->bi_flashstart);
+ bdinfo_print_num_l("flashsize", (ulong)bd->bi_flashsize);
+ bdinfo_print_num_l("flashoffset", (ulong)bd->bi_flashoffset);
printf("baudrate = %u bps\n", gd->baudrate);
- bdinfo_print_num("relocaddr", gd->relocaddr);
- bdinfo_print_num("reloc off", gd->reloc_off);
+ bdinfo_print_num_l("relocaddr", gd->relocaddr);
+ bdinfo_print_num_l("reloc off", gd->reloc_off);
printf("%-12s= %u-bit\n", "Build", (uint)sizeof(void *) * 8);
if (IS_ENABLED(CONFIG_CMD_NET)) {
printf("current eth = %s\n", eth_get_name());
print_eth(0);
printf("IP addr = %s\n", env_get("ipaddr"));
}
- bdinfo_print_num("fdt_blob", (ulong)gd->fdt_blob);
- bdinfo_print_num("new_fdt", (ulong)gd->new_fdt);
- bdinfo_print_num("fdt_size", (ulong)gd->fdt_size);
+ bdinfo_print_num_l("fdt_blob", (ulong)gd->fdt_blob);
+ bdinfo_print_num_l("new_fdt", (ulong)gd->new_fdt);
+ bdinfo_print_num_l("fdt_size", (ulong)gd->fdt_size);
if (IS_ENABLED(CONFIG_DM_VIDEO))
show_video_info();
#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
- bdinfo_print_num("FB base ", gd->fb_base);
+ bdinfo_print_num_l("FB base ", gd->fb_base);
#endif
#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
- bdinfo_print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
+ bdinfo_print_num_l("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
#endif
if (gd->fdt_blob) {
struct lmb lmb;
diff --git a/include/init.h b/include/init.h
index 980be27..88f8459 100644
--- a/include/init.h
+++ b/include/init.h
@@ -326,7 +326,8 @@
#endif
/* Print a numeric value (for use in arch_print_bdinfo()) */
-void bdinfo_print_num(const char *name, ulong value);
+void bdinfo_print_num_l(const char *name, ulong value);
+void bdinfo_print_num_ll(const char *name, unsigned long long value);
/* Print a clock speed in MHz */
void bdinfo_print_mhz(const char *name, unsigned long hz);