Merge branch 'master' into u-boot-5329-early
diff --git a/CHANGELOG b/CHANGELOG
index b77eec7..2397191 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,359 @@
+commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 6 02:50:19 2007 +0200
+
+ Code cleanup and default config update for STC GP3 SSA board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b44896215a09c60fa40cae906f7ed207bbc2c492
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Jul 5 08:17:37 2007 +0200
+
+ Merged POST framework with the current TOT.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit f780b83316d9af1f61d71cc88b1917b387b9b995
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Wed Jun 27 18:11:38 2007 +0200
+
+ resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 4 10:06:30 2007 +0200
+
+ ppc4xx: Update lwmon5 board
+
+ - Add optional ECC generation routine to preserve existing
+ RAM values. This is needed for the Linux log-buffer support
+ - Add optional DDR2 setup with CL=4
+ - GPIO50 not used anymore
+ - Lime register setup added
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1f2a05898658900dc5717761e27abf2052e67e13
+Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
+Date: Sat Jun 30 18:50:48 2007 +0200
+
+ Fix S-ATA support.
+
+ Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
+
+commit a5d71e290f3673269be8eefb4ec44f53412f9461
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Mon Jun 25 19:11:37 2007 +0200
+
+ [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
+Author: Niklaus Giger <niklaus.giger@nestal.com>
+Date: Mon Jun 25 17:03:13 2007 +0200
+
+ ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
+
+ This patch prints the DDR status registers upon machine check
+ interrupt on the 440EPx/GRx. This can be useful especially when
+ ECC support is enabled.
+
+ I added some small changes to the original patch from Niklaus to
+ make it compile clean.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 807018fb7faceb429ce0cb47baa2073746b33a4e
+Author: Niklaus Giger <niklaus.giger@nestal.com>
+Date: Mon Jun 25 16:50:55 2007 +0200
+
+ ppc4xx: Fix O=buildir builds
+
+ This patch fixes the problem to assemble cpu/ppc4xx/start.S
+ experienced last week where building failed having specified
+ O=../build.sequoia.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 466fff1a7bb5fe764a06450626f6098219f446b8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 25 15:57:39 2007 +0200
+
+ ppc4xx: Add pci_pre_init() for 405 boards
+
+ This patch removes the CFG_PCI_PRE_INIT option completely, since
+ it's not needed anymore with the patch from Matthias Fuchs with
+ the "weak" pci_pre_init() implementation.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f35c53166213c24a5a0e2390ed861136ff73870
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Jun 24 17:41:21 2007 +0200
+
+ ppc4xx: Maintenance patch for esd's CPCI405 derivats
+
+ -add pci_pre_init() for pci interrupt fixup code
+ -disable phy sleep mode via reset_phy() function
+ -use correct io accessors
+ -cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Jun 24 17:23:41 2007 +0200
+
+ ppc4xx: Add pci_pre_init() for 405 boards
+
+ This patch adds support for calling a plattform dependant
+ pci_pre_init() function for 405 boards. This can be used to
+ move the current pci_405gp_fixup_irq() function into the
+ board code.
+
+ This patch also makes the CFG_PCI_PRE_INIT define obsolete.
+ A default function with 'weak' attribute is used when
+ a board specific pci_pre_init() is not implemented.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jun 22 23:59:00 2007 +0200
+
+ Coding stylke cleanup; rebuild CHANGELOG
+
+commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
+Author: Igor Lisitsin <igor@emcraft.com>
+Date: Wed Apr 18 14:55:19 2007 +0400
+
+ Adapt log buffer code to support Linux 2.6
+
+ A new environment variable, "logversion", selects the log buffer
+ behaviour. If it is not set or set to a value other than 2, then the
+ old, Linux 2.4.4, behaviour is selected.
+
+ Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+ --
+
+commit a11e06965ec91270c51853407ff1261d3c740386
+Author: Igor Lisitsin <igor@emcraft.com>
+Date: Wed Mar 28 19:06:19 2007 +0400
+
+ Extend POST support for PPC440
+
+ Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
+
+ Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+ --
+
+commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jun 22 19:11:54 2007 +0200
+
+ [PCS440EP] upgrade the PCS440EP board:
+ - Show on the Status LEDs, some States of the board.
+ - Get the MAC addresses from the EEProm
+ - use PREBOOT
+ - use the CF on the board.
+ - check the U-Boot image in the Flash with a SHA1
+ checksum.
+ - use dynamic TLB entries generation for the SDRAM
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3a1f5c81b0b9557817a789bece839905581c2205
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 22 16:58:40 2007 +0200
+
+ ppc4xx: Fix problem with extended program_tlb() funtion
+
+ The recently extended program_tlb() function had a problem when
+ multiple TLB's had to be setup (for example with 512MB of SDRAM). The
+ virtual address was not incremented. This patch fixes this issue
+ and is tested on Katmai with 512MB SDRAM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jun 22 14:58:04 2007 +0200
+
+ [ppc] Fix build breakage for all non-4xx PowerPC variants.
+
+ - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
+ - minor 4xx cleanup
+
+commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 20 18:14:24 2007 +0200
+
+ Coding style cleanup. Refresh CHANGELOG.
+
+commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 17:22:44 2007 +0200
+
+ ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
+
+ This patch adds a board command to configure the I2C bootstrap EEPROM
+ values. Right now 533 and 667MHz are supported for booting either via NOR
+ or NAND FLASH. Here the usage:
+
+ => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
+ => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 16:42:31 2007 +0200
+
+ [ppc4xx] Fix problem with NAND booting on AMCC Acadia
+
+ The latest changes showed a problem with the location of the NAND-SPL
+ image in the OCM and the init-data area (incl. cache). This patch
+ fixes this problem.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 86ba99e34194394052d24c04dc40d1263d29a26f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 16:40:58 2007 +0200
+
+ [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 11:33:41 2007 +0200
+
+ [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
+
+ Now CONFIG_440 has to be defined in all PPC440 board config files.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit efa35cf12d914d4caba942acd5a6c45f217de302
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 15 11:19:28 2007 +0200
+
+ ppc4xx: Clean up 440 exceptions handling
+
+ - Introduced dedicated switches for building 440 and 405 images required
+ for 440-specific machine instructions like 'rfmci' etc.
+
+ - Exception vectors moved to the proper location (_start moved away from
+ the critical exception handler space, which it occupied)
+
+ - CriticalInput now serviced (with default handler)
+
+ - MachineCheck properly serviced (added a dedicated handler and return
+ subroutine)
+
+ - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
+ unhandled and those not relevant for 4xx were eliminated)
+
+ - Eliminated Linux leftovers, removed dead code
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 08:18:01 2007 +0200
+
+ [ppc4xx] Add initial lwmon5 board support
+
+ This patch adds initial support for the Liebherr lwmon5 board euqipped
+ with an AMCC 440EPx PowerPC.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 85f737376d5ff3d5f0d45a8b657686326d175307
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 07:39:43 2007 +0200
+
+ [ppc4xx] Extend 44x GPIO setup with default output state
+
+ The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
+ is extended with the default GPIO output state (level).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 14 11:14:32 2007 +0200
+
+ [ppc4xx] Extend program_tlb() with virtual & physical addresses
+
+ Now program_tlb() allows to program a TLB (or multiple) with
+ different virtual and physical addresses. With this change, now one
+ physical region (e.g. SDRAM) can be mapped 2 times, once with caches
+ diabled and once with caches enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 23 19:02:41 2007 +0200
+
+ Change 'repeatable' attribute of some commands to sensible values.
+
+ Most prominently this changes 'erase' to be non-repeatable.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 5afb202093f6a001797db92cf695b93a70ea9ab4
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 23 18:47:48 2007 +0200
+
+ Fix 'run' not to continue after interrupted command
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Jun 8 14:52:22 2007 +0200
+
+ TQM5200: Add Flat Device Tree support, update default env. accordingly.
+
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9045f33c023f698660a2e45d1b2194c0711abebc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jun 8 10:24:58 2007 +0200
+
+ Fix config problems on SC3 board; make ide_reset_timeout work.
+
+commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
+Author: Benoît Monin <bmonin@adeneo.eu>
+Date: Fri Jun 8 09:55:24 2007 +0200
+
+ [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
+
+ Set the correct value in GPIOx_TCR when configuring the gpio
+ with CFG_440_GPIO_TABLE.
+
+ Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 6 16:26:56 2007 +0200
+
+ Coding Style cleanup; generate new CHANGELOG file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit c440bfe6d6d92d66478a7e84402b31f48413617b
Author: Stefan Roese <sr@denx.de>
Date: Wed Jun 6 11:42:13 2007 +0200
@@ -328,6 +684,14 @@
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 822d55365bb557e084d0e33625a6dedcc866110b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed May 23 14:09:46 2007 -0500
+
+ Add LIST_86xx MAKEALL target for PowerPC builds.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
commit 9f0077abd69f7a7c756a915b961037302be3e6f2
Author: Stefan Roese <sr@denx.de>
Date: Tue May 22 12:48:09 2007 +0200
@@ -376,6 +740,17 @@
Makefile permissions
+commit 255a3577c848706441daee0174543efe205a77f8
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed May 16 16:52:19 2007 -0500
+
+ Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
+
+ For all practical u-boot purposes, TSECs don't differ throughout the
+ mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 70124c2602ae2d4c5d3dba05b482d91548242de8
Author: Stefano Babic <sbabic@denx.de>
Date: Wed May 16 14:49:12 2007 +0200
@@ -417,6 +792,109 @@
Coding Style Cleanup, new CHANGELOG
+commit 3162eb836903c8b247fdc7470dd39bfa6996f495
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 15 23:38:05 2007 +0200
+
+ Minor coding style cleanup.
+
+commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
+Author: mushtaq khan <mushtaq_k@procsys.com>
+Date: Fri Apr 20 14:23:02 2007 +0530
+
+ Add driver for S-ATA-controller on Intel processors with South
+ Bridge, ICH-5, ICH-6 and ICH-7.
+
+ Implementation:
+
+ 1. Code is divided in to two files. All functions, which are
+ controller specific are kept in "drivers/ata_piix.c" file and
+ functions, which are not controller specific, are kept in
+ "common/cmd_sata.c" file.
+
+ 2. Reading and Writing from the S-ATA drive is done using PIO method.
+
+ 3. Driver can be configured for 48-bit addressing by defining macro
+ CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
+ addressing.
+
+ 4. S-ATA read function is hooked to the File system, commands like
+ ext2ls and ext2load file can be used. This has been tested.
+
+ 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
+ controller and identifies the S-ATA drives connected to it.
+
+ 6. U-Boot command "sata" is added, which is used to read/write, print
+ partition table and get info about the drives present. This I have
+ implemented in same way as "ide" command is implemented in U-Boot.
+
+ 7. This driver is for S-ATA in native mode.
+
+ 8. This driver does not support the Native command queuing and
+ Hot-plugging.
+
+ Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
+
+commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
+Author: mushtaq khan <mushtaq_k@procsys.com>
+Date: Mon Apr 30 15:57:22 2007 +0530
+
+ Fixes bug clearing the bss section for i386
+
+ Hi,
+ There is a bug in the code of clearing the bss section for processor
+ i386.(File: cpu/i386/start.S)
+ In the code, bss_start addr (starting addr of bss section) is put into
+ the register %eax, but the code which clears the bss section refers to
+ the addr pointed by %edi.
+
+ This patch fixes this bug by putting bss_start into %edi register.
+
+ Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
+
+commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Mon Apr 30 16:47:28 2007 -0500
+
+ Add support for BCM5464 Quad Phy
+
+ Added support for Broadcom's BCM5464 Quad Phy
+
+ Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Wed May 9 08:10:57 2007 +0800
+
+ Search the exception table with linear algorithm
+
+ Search the exception table with linear algorithm instead of
+ bisecting algorithm.
+ Because the exception table might be unsorted.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
+Author: Aubrey.Li <aubrey.adi@gmail.com>
+Date: Mon May 14 11:47:35 2007 +0800
+
+ Fix compilation issues on MACOSX
+
+ Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
+ Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
+
+commit 56fd7162985c412317bbf763a225fba23c64fd31
+Author: Stephen Williams <steve@icarus.com>
+Date: Tue May 15 07:55:42 2007 -0700
+
+ Fix for compile of JSE target
+
+ The attached patch fixes the compile of the JSE board in the
+ denx git as of 14 may 2007. It is an extremely simple patch,
+ it just adds the missing define of CFG_SYSTEMACE_WIDTH.
+
+ Fix to compile JSE against 20070514 git of u-boot
+
commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
Author: Stefan Roese <sr@denx.de>
Date: Fri May 11 12:01:49 2007 +0200
@@ -756,6 +1234,20 @@
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 2f550ab976405300f5b07bf2890800840d0aa05f
+Author: Timur Tabi <timur@freescale.com>
+Date: Sat May 5 08:12:30 2007 +0200
+
+ 5xxx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
commit a79886590593ba1d667c840caa4940c61639f18f
Author: Thomas Knobloch <knobloch@siemens.com>
Date: Sat May 5 07:04:42 2007 +0200
@@ -919,12 +1411,35 @@
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
+Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+Date: Sun Apr 29 14:01:54 2007 +0200
+
+ [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
+
+ MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
+ message. Use PVR to distinguish between the two variants, and print proper CPU
+ information.
+
+ Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
commit 5c5d3242935cf3543af01142627494434834cf98
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Wed Apr 25 12:34:38 2007 -0500
mpc83xx: minor fixups for 8313rdb introduction
+commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 25 16:01:26 2007 +0200
+
+ [PATCH] simplify silent console
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
commit 144876a380f5756f57412caf74c1d6dc201dd796
Author: Michal Simek <monstr@monstr.eu>
Date: Tue Apr 24 23:01:02 2007 +0200
@@ -1221,6 +1736,58 @@
Signed-off-by: Scott Wood <scottwood@freescale.com>
+commit 7fc4c71a143be8666d70803fb25ae60379c95622
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 23 15:39:59 2007 +0200
+
+ Fix file mode
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 38257988abfe74d459ca2ad748b109ca04e4efe1
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Mon Apr 23 15:30:39 2007 +0200
+
+ [PATCH] Avoid assigning PCI resources from zero address
+
+ If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
+ core complains and IDE drivers fails to work. Also, assigning zero to a BAR
+ was illegal according to PCI 2.1 (the later revisions seem to have excluded the
+ sentence about "0" being considered an invalid address) -- so, use a reasonable
+ starting value of 0x1000 (that's what the most Linux archs are using).
+
+ Alternatively, one might have fixed the calls to pci_set_region() individually
+ (some code even seems to have taken care of this issue) but that would have
+ been a lot more work. :-)
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit afb903a2eb9436baa9270ccc0c27082d86497d89
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon Apr 23 14:00:11 2007 +0200
+
+ [patch] setenv(...) can delete environmentalvariables
+
+ update setenv() function so that entering a NULL value for the
+ variable's value will delete the environmental variable
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 36f104e5caa747d568eff26b369565af57c2ffa6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Apr 23 13:54:24 2007 +0200
+
+ [patch] use unsigned char in smc91111 driver for mac
+
+ the v_mac variable in the smc91111 driver is declared as a signed char ...
+ this causes problems when one of the bytes in the MAC is "signed" like 0xE0
+ because when it gets printed out, you get a display like:
+ 0xFFFFFFE0 and that's no good
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
Author: Stefan Roese <sr@denx.de>
Date: Mon Apr 23 12:00:22 2007 +0200
diff --git a/MAINTAINERS b/MAINTAINERS
index 2eaef17..693b115 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -282,6 +282,7 @@
bunbinga PPC405EP
ebony PPC440GP
katmai PPC440SPe
+ lwmon5 PPC440EPx
ocotea PPC440GX
p3p440 PPC440GP
pcs440ep PPC440EP
diff --git a/MAKEALL b/MAKEALL
index 22c6c6d..7f637c2 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -83,15 +83,15 @@
csb272 csb472 DASA_SIM DP405 \
DU405 ebony ERIC EXBITGEN \
G2000 HH405 HUB405 JSE \
- KAREF katmai luan METROBOX \
- MIP405 MIP405T ML2 ml300 \
- ocotea OCRTC ORSG p3p440 \
- PCI405 pcs440ep PIP405 PLU405 \
- PMC405 PPChameleonEVB sbc405 sc3 \
- sequoia sequoia_nand taishan VOH405 \
- VOM405 W7OLMC W7OLMG walnut \
- WUH405 XPEDITE1K yellowstone yosemite \
- yucca \
+ KAREF katmai luan lwmon5 \
+ METROBOX MIP405 MIP405T ML2 \
+ ml300 ocotea OCRTC ORSG \
+ p3p440 PCI405 pcs440ep PIP405 \
+ PLU405 PMC405 PPChameleonEVB sbc405 \
+ sc3 sequoia sequoia_nand taishan \
+ VOH405 VOM405 W7OLMC W7OLMG \
+ walnut WUH405 XPEDITE1K yellowstone \
+ yosemite yucca \
"
#########################################################################
@@ -151,6 +151,14 @@
"
#########################################################################
+## MPC86xx Systems
+#########################################################################
+
+LIST_86xx=" \
+ MPC8641HPCN \
+"
+
+#########################################################################
## 74xx/7xx Systems
#########################################################################
@@ -170,6 +178,7 @@
${LIST_8220} ${LIST_824x} ${LIST_8260} \
${LIST_83xx} \
${LIST_85xx} \
+ ${LIST_86xx} \
${LIST_4xx} \
${LIST_74xx} ${LIST_7xx}"
@@ -356,7 +365,7 @@
microblaze| \
mips|mips_el| \
nios|nios2| \
- ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
+ ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \
x86|I486)
for target in `eval echo '$LIST_'${arg}`
do
diff --git a/Makefile b/Makefile
index 8a728a4..2d77454 100644
--- a/Makefile
+++ b/Makefile
@@ -216,6 +216,8 @@
LIBS += post/libpost.a post/drivers/libpostdrivers.a
LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
+LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \
+ "post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
"post/cpu/$(CPU)/libpost$(CPU).a"; fi)
LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
@@ -247,7 +249,7 @@
#########################################################################
#########################################################################
-ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
+ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
all: $(ALL)
@@ -267,6 +269,9 @@
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
+$(obj)u-boot.sha1: $(obj)u-boot.bin
+ ./tools/ubsha1 $(obj)u-boot.bin
+
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
@@ -1141,6 +1146,9 @@
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
+lwmon5_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
+
METROBOX_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
@@ -2469,7 +2477,7 @@
$(obj)examples/smc91111_eeprom $(obj)examples/interrupt \
$(obj)examples/test_burst
rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
- $(obj)tools/gen_eth_addr
+ $(obj)tools/gen_eth_addr $(obj)tools/ubsha1
rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
@@ -2492,7 +2500,7 @@
rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
rm -fr $(obj)*.*~
rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
- rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
+ rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c
rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
[ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f
diff --git a/README b/README
index dd12cd7..2a0dafa 100644
--- a/README
+++ b/README
@@ -1704,28 +1704,69 @@
-31 post/post.c POST test failed, detected by post_output_backlog()
-32 post/post.c POST test failed, detected by post_run_single()
- -1 common/cmd_doc.c Bad usage of "doc" command
- -1 common/cmd_doc.c No boot device
- -1 common/cmd_doc.c Unknown Chip ID on boot device
- -1 common/cmd_doc.c Read Error on boot device
- -1 common/cmd_doc.c Image header has bad magic number
+ 34 common/cmd_doc.c before loading a Image from a DOC device
+ -35 common/cmd_doc.c Bad usage of "doc" command
+ 35 common/cmd_doc.c correct usage of "doc" command
+ -36 common/cmd_doc.c No boot device
+ 36 common/cmd_doc.c correct boot device
+ -37 common/cmd_doc.c Unknown Chip ID on boot device
+ 37 common/cmd_doc.c correct chip ID found, device available
+ -38 common/cmd_doc.c Read Error on boot device
+ 38 common/cmd_doc.c reading Image header from DOC device OK
+ -39 common/cmd_doc.c Image header has bad magic number
+ 39 common/cmd_doc.c Image header has correct magic number
+ -40 common/cmd_doc.c Error reading Image from DOC device
+ 40 common/cmd_doc.c Image header has correct magic number
+ 41 common/cmd_ide.c before loading a Image from a IDE device
+ -42 common/cmd_ide.c Bad usage of "ide" command
+ 42 common/cmd_ide.c correct usage of "ide" command
+ -43 common/cmd_ide.c No boot device
+ 43 common/cmd_ide.c boot device found
+ -44 common/cmd_ide.c Device not available
+ 44 common/cmd_ide.c Device available
+ -45 common/cmd_ide.c wrong partition selected
+ 45 common/cmd_ide.c partition selected
+ -46 common/cmd_ide.c Unknown partition table
+ 46 common/cmd_ide.c valid partition table found
+ -47 common/cmd_ide.c Invalid partition type
+ 47 common/cmd_ide.c correct partition type
+ -48 common/cmd_ide.c Error reading Image Header on boot device
+ 48 common/cmd_ide.c reading Image Header from IDE device OK
+ -49 common/cmd_ide.c Image header has bad magic number
+ 49 common/cmd_ide.c Image header has correct magic number
+ -50 common/cmd_ide.c Image header has bad checksum
+ 50 common/cmd_ide.c Image header has correct checksum
+ -51 common/cmd_ide.c Error reading Image from IDE device
+ 51 common/cmd_ide.c reading Image from IDE device OK
+ 52 common/cmd_nand.c before loading a Image from a NAND device
+ -53 common/cmd_nand.c Bad usage of "nand" command
+ 53 common/cmd_nand.c correct usage of "nand" command
+ -54 common/cmd_nand.c No boot device
+ 54 common/cmd_nand.c boot device found
+ -55 common/cmd_nand.c Unknown Chip ID on boot device
+ 55 common/cmd_nand.c correct chip ID found, device available
+ -56 common/cmd_nand.c Error reading Image Header on boot device
+ 56 common/cmd_nand.c reading Image Header from NAND device OK
+ -57 common/cmd_nand.c Image header has bad magic number
+ 57 common/cmd_nand.c Image header has correct magic number
+ -58 common/cmd_nand.c Error reading Image from NAND device
+ 58 common/cmd_nand.c reading Image from NAND device OK
- -1 common/cmd_ide.c Bad usage of "ide" command
- -1 common/cmd_ide.c No boot device
- -1 common/cmd_ide.c Unknown boot device
- -1 common/cmd_ide.c Unknown partition table
- -1 common/cmd_ide.c Invalid partition type
- -1 common/cmd_ide.c Read Error on boot device
- -1 common/cmd_ide.c Image header has bad magic number
+ -60 common/env_common.c Environment has a bad CRC, using default
- -1 common/cmd_nand.c Bad usage of "nand" command
- -1 common/cmd_nand.c No boot device
- -1 common/cmd_nand.c Unknown Chip ID on boot device
- -1 common/cmd_nand.c Read Error on boot device
- -1 common/cmd_nand.c Image header has bad magic number
+ 64 net/eth.c starting with Ethernetconfiguration.
+ -64 net/eth.c no Ethernet found.
+ 65 net/eth.c Ethernet found.
- -1 common/env_common.c Environment has a bad CRC, using default
-
+ -80 common/cmd_net.c usage wrong
+ 80 common/cmd_net.c before calling NetLoop()
+ -81 common/cmd_net.c some error in NetLoop() occured
+ 81 common/cmd_net.c NetLoop() back without error
+ -82 common/cmd_net.c size == 0 (File with size 0 loaded)
+ 82 common/cmd_net.c trying automatic boot
+ 83 common/cmd_net.c running autoscript
+ -83 common/cmd_net.c some error in automatic boot or autoscript
+ 84 common/cmd_net.c end without errors
Modem Support:
--------------
diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile
index ddbcb80..c56b273 100644
--- a/board/amcc/acadia/Makefile
+++ b/board/amcc/acadia/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o cmd_acadia.o cpr.o memory.o
+COBJS = $(BOARD).o cmd_acadia.o memory.o pll.o
SOBJS =
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 46d63e6..8b82ea4 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -31,13 +31,13 @@
/*
* GPIO0 setup (select GPIO or alternate function)
*/
- out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
- out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
- out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
- out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
- out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
- out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
- out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
+ out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
+ out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
+ out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
+ out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
+ out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
+ out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
+ out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
/*
* Ultra (405EZ) was nice enough to add another GPIO controller
@@ -55,10 +55,12 @@
{
unsigned int reg;
+#if !defined(CONFIG_NAND_U_BOOT)
/* don't reinit PLL when booting via I2C bootstrap option */
mfsdr(SDR_PINSTP, reg);
if (reg != 0xf0000000)
board_pll_init_f();
+#endif
acadia_gpio_init();
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 25904d3..9346d2c 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -31,6 +31,8 @@
#include <asm/io.h>
#include <asm/gpio.h>
+extern void board_pll_init_f(void);
+
/*
* sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
*/
@@ -67,6 +69,15 @@
long int initdram(int board_type)
{
+#if defined(CONFIG_NAND_SPL)
+ u32 reg;
+
+ /* don't reinit PLL when booting via I2C bootstrap option */
+ mfsdr(SDR_PINSTP, reg);
+ if (reg != 0xf0000000)
+ board_pll_init_f();
+#endif
+
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
int i;
u32 val;
diff --git a/board/amcc/acadia/cpr.c b/board/amcc/acadia/pll.c
similarity index 100%
rename from board/amcc/acadia/cpr.c
rename to board/amcc/acadia/pll.c
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 2e651df..caf6690 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -416,7 +416,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
@@ -457,7 +457,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
index dcafac9..ededb3e 100644
--- a/board/amcc/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -207,14 +207,14 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long strap;
/*--------------------------------------------------------------------------+
- * The ebony board is always configured as the host & requires the
- * PCI arbiter to be enabled.
+ * The ebony board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
*--------------------------------------------------------------------------*/
strap = mfdcr(cpc0_strp1);
if ((strap & 0x00100000) == 0) {
@@ -224,7 +224,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 286bdc1..b804d55 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -292,7 +292,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
@@ -309,7 +309,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 778aafc..2eff3b3 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -161,7 +161,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init( struct pci_controller *hose )
{
unsigned long strap;
@@ -179,7 +179,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 3f6d204..3bd1b81 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -306,7 +306,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
@@ -323,7 +323,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile
index 06ef7f9..e1c9ad4 100644
--- a/board/amcc/sequoia/Makefile
+++ b/board/amcc/sequoia/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o sdram.o
+COBJS = $(BOARD).o cmd_sequoia.o sdram.o
SOBJS = init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
new file mode 100644
index 0000000..6fc60ea
--- /dev/null
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+
+static u8 boot_533_nor[] = {
+ 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+};
+
+static u8 boot_533_nand[] = {
+ 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xd0, 0x10,
+ 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+};
+
+static u8 boot_667_nor[] = {
+ 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+};
+
+static u8 boot_667_nand[] = {
+ 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x10,
+ 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+};
+
+static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u8 chip;
+ u8 *buf;
+ int cpu_freq;
+
+ if (argc < 3) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ cpu_freq = simple_strtol(argv[1], NULL, 10);
+ if (!((cpu_freq == 533) || (cpu_freq == 667))) {
+ printf("Unsupported cpu-frequency - only 533 and 667 supported\n");
+ return 1;
+ }
+
+ /* use 0x52 as I2C EEPROM address for now */
+ chip = 0x52;
+
+ if ((strcmp(argv[2], "nor") != 0) &&
+ (strcmp(argv[2], "nand") != 0)) {
+ printf("Unsupported boot-device - only nor|nand support\n");
+ return 1;
+ }
+
+ if (strcmp(argv[2], "nand") == 0) {
+ switch (cpu_freq) {
+ default:
+ case 533:
+ buf = boot_533_nand;
+ break;
+ case 667:
+ buf = boot_667_nand;
+ break;
+ }
+ } else {
+ switch (cpu_freq) {
+ default:
+ case 533:
+ buf = boot_533_nor;
+ break;
+ case 667:
+ buf = boot_667_nor;
+ break;
+ }
+ }
+
+ if (i2c_write(chip, 0, 1, buf, 16) != 0)
+ printf("Error writing to EEPROM at address 0x%x\n", chip);
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+
+ printf("Done\n");
+ printf("Please power-cycle the board for the changes to take effect\n");
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ bootstrap, 3, 0, do_bootstrap,
+ "bootstrap - program the I2C bootstrap EEPROM\n",
+ "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
+ );
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index ba365ae..f823117 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -25,7 +25,6 @@
#include <common.h>
#include <asm/processor.h>
#include <ppc440.h>
-#include "sequoia.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -226,7 +225,7 @@
if (act == NULL || strcmp(act, "hostdev") == 0) {
/* SDR Setting */
mfsdr(SDR0_PFC1, sdr0_pfc1);
- mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2D0CR, usb2d0cr);
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mfsdr(SDR0_USB2H0CR, usb2h0cr);
@@ -254,7 +253,7 @@
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/
mtsdr(SDR0_PFC1, sdr0_pfc1);
- mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2D0CR, usb2d0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mtsdr(SDR0_USB2H0CR, usb2h0cr);
@@ -298,7 +297,7 @@
/* SDR Setting */
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mfsdr(SDR0_USB2H0CR, usb2h0cr);
- mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2D0CR, usb2d0cr);
mfsdr(SDR0_PFC1, sdr0_pfc1);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
@@ -323,7 +322,7 @@
mtsdr(SDR0_USB2H0CR, usb2h0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
- mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2D0CR, usb2d0cr);
mtsdr(SDR0_PFC1, sdr0_pfc1);
/*clear resets*/
@@ -426,23 +425,10 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
-#if 0
- /*--------------------------------------------------------------------------+
- * Cactus is always configured as the host & requires the
- * PCI arbiter to be enabled ???
- *--------------------------------------------------------------------------*/
- unsigned long strap;
- mfsdr(sdr_sdstp1, strap);
- if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
- printf("PCI: SDR0_STRP1[PAE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return 0;
- }
-#endif
/*-------------------------------------------------------------------------+
| Set priority for all PLB3 devices to 0.
@@ -480,7 +466,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
@@ -586,3 +572,13 @@
return (1);
}
#endif /* defined(CONFIG_PCI) */
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return 0; /* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
diff --git a/board/amcc/sequoia/sequoia.h b/board/amcc/sequoia/sequoia.h
deleted file mode 100644
index 1d44b16..0000000
--- a/board/amcc/sequoia/sequoia.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-/*----------------------------------------------------------------------------+
- | EBC Configuration Register - EBC0_CFG
- +----------------------------------------------------------------------------*/
-/* External Bus Three-State Control */
-#define EBC0_CFG_EBTC_DRIVEN 0x80000000
-/* Device-Paced Time-out Disable */
-#define EBC0_CFG_PTD_ENABLED 0x00000000
-/* Ready Timeout Count */
-#define EBC0_CFG_RTC_MASK 0x38000000
-#define EBC0_CFG_RTC_16PERCLK 0x00000000
-#define EBC0_CFG_RTC_32PERCLK 0x08000000
-#define EBC0_CFG_RTC_64PERCLK 0x10000000
-#define EBC0_CFG_RTC_128PERCLK 0x18000000
-#define EBC0_CFG_RTC_256PERCLK 0x20000000
-#define EBC0_CFG_RTC_512PERCLK 0x28000000
-#define EBC0_CFG_RTC_1024PERCLK 0x30000000
-#define EBC0_CFG_RTC_2048PERCLK 0x38000000
-/* External Master Priority Low */
-#define EBC0_CFG_EMPL_LOW 0x00000000
-#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000
-#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000
-#define EBC0_CFG_EMPL_HIGH 0x06000000
-/* External Master Priority High */
-#define EBC0_CFG_EMPH_LOW 0x00000000
-#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000
-#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000
-#define EBC0_CFG_EMPH_HIGH 0x01800000
-/* Chip Select Three-State Control */
-#define EBC0_CFG_CSTC_DRIVEN 0x00400000
-/* Burst Prefetch */
-#define EBC0_CFG_BPF_ONEDW 0x00000000
-#define EBC0_CFG_BPF_TWODW 0x00100000
-#define EBC0_CFG_BPF_FOURDW 0x00200000
-/* External Master Size */
-#define EBC0_CFG_EMS_8BIT 0x00000000
-/* Power Management Enable */
-#define EBC0_CFG_PME_DISABLED 0x00000000
-#define EBC0_CFG_PME_ENABLED 0x00020000
-/* Power Management Timer */
-#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
-
-#define SDR0_USB0 0x0320 /* USB Control Register */
diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c
index 1a2e53b..bc976c7 100644
--- a/board/amcc/taishan/taishan.c
+++ b/board/amcc/taishan/taishan.c
@@ -236,7 +236,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
@@ -253,7 +253,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index c2e12ba..912f09e 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -385,7 +385,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
@@ -426,7 +426,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index 90eaab1..7316c34 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -604,7 +604,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
@@ -621,7 +621,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/bf537-stamp/ether_bf537.c b/board/bf537-stamp/ether_bf537.c
index f00837a..807b9e8 100644
--- a/board/bf537-stamp/ether_bf537.c
+++ b/board/bf537-stamp/ether_bf537.c
@@ -48,7 +48,7 @@
#define TXBUF_BASE_ADDR 0xFF800000
#define TX_BUF_CNT 1
-#define TOUT_LOOP 1000000
+#define TOUT_LOOP 1000000
ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT];
ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX];
diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h
index acc1e86..1fa7a10 100644
--- a/board/bf537-stamp/flash-defines.h
+++ b/board/bf537-stamp/flash-defines.h
@@ -44,9 +44,9 @@
#define ERASE_SECT 6
#define READ 7
#define GET_SECTNUM 8
-#define FLASH_START_L 0x0000
-#define FLASH_START_H 0x2000
-#define FLASH_MAN_ST 2
+#define FLASH_START_L 0x0000
+#define FLASH_START_H 0x2000
+#define FLASH_MAN_ST 2
#define RESET_VAL 0xF0
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
diff --git a/board/bf537-stamp/stm_m25p64.c b/board/bf537-stamp/stm_m25p64.c
index 7077e85..d9c08ee 100644
--- a/board/bf537-stamp/stm_m25p64.c
+++ b/board/bf537-stamp/stm_m25p64.c
@@ -9,7 +9,7 @@
/* Application definitions */
-#define NUM_SECTORS 128 /* number of sectors */
+#define NUM_SECTORS 128 /* number of sectors */
#define SECTOR_SIZE 0x10000
#define NOP_NUM 1000
diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S
index 3fb2d0c..8632097 100644
--- a/board/bf537-stamp/u-boot.lds.S
+++ b/board/bf537-stamp/u-boot.lds.S
@@ -33,7 +33,7 @@
__DYNAMIC = 0; */
MEMORY
{
- ram : ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024)
+ ram : ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024)
l1_code : ORIGIN = 0xFFA00000, LENGTH = 0xC000
l1_data : ORIGIN = 0xFF900000, LENGTH = 0x4000
}
@@ -47,11 +47,11 @@
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
@@ -68,7 +68,7 @@
.text :
{
/* WARNING - the following is hand-optimized to fit within */
- /* the sector before the environment sector. If it throws */
+ /* the sector before the environment sector. If it throws */
/* an error during compilation remove an object here to get */
/* it linked after the configuration sector. */
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index 929ff2e..b723641 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -345,23 +345,23 @@
/* This is needed to get the RGMII working for the 1.3+
* CDS cards */
if (get_board_version() == 0x13) {
- miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+ miiphy_write(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 29, 18);
- miiphy_read(CONFIG_MPC85XX_TSEC1_NAME,
+ miiphy_read(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 30, &temp);
temp = (temp & 0xf03f);
temp |= 2 << 9; /* 36 ohm */
temp |= 2 << 6; /* 39 ohm */
- miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+ miiphy_write(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 30, temp);
- miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+ miiphy_write(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 29, 3);
- miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+ miiphy_write(CONFIG_TSEC1_NAME,
TSEC1_PHY_ADDR, 30, 0x8000);
}
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index f803610..69cb8ce 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -23,13 +23,15 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
#include <malloc.h>
#include <net.h>
+#include <pci.h>
DECLARE_GLOBAL_DATA_PTR;
-extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/
#if 0
#define FPGA_DEBUG
#endif
@@ -52,8 +54,6 @@
* include common fpga code (for esd boards)
*/
#include "../common/fpga.c"
-
-
#include "../common/auto_update.h"
#ifdef CONFIG_CPCI405AB
@@ -86,13 +86,11 @@
int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
-
/* Prototypes */
int cpci405_version(void);
int gunzip(void *, int, unsigned char *, unsigned long *);
void lxt971_no_sleep(void);
-
int board_early_init_f (void)
{
#ifndef CONFIG_CPCI405_VER2
@@ -111,10 +109,10 @@
/*
* First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
*/
- out32(GPIO0_ODR, 0x00000000); /* no open drain pins */
- out32(GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */
+ out32(GPIO0_ODR, 0x00000000); /* no open drain pins */
+ out32(GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */
out32(GPIO0_OR, CFG_FPGA_PRG); /* set output pins to high */
- out32(GPIO0_OR, 0); /* pull prg low */
+ out32(GPIO0_OR, 0); /* pull prg low */
/*
* Boot onboard FPGA
@@ -176,47 +174,48 @@
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+#ifdef CONFIG_CPCI405_6U
if (cpci405_version() == 3) {
- mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */
+ mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */
} else {
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
+ mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
}
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+#else
+ mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
+#endif
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
return 0;
}
-
/* ------------------------------------------------------------------------- */
int ctermm2(void)
{
#ifdef CONFIG_CPCI405_VER2
- return 0; /* no, board is cpci405 */
+ return 0; /* no, board is cpci405 */
#else
if ((*(unsigned char *)0xf0000400 == 0x00) &&
(*(unsigned char *)0xf0000401 == 0x01))
- return 0; /* no, board is cpci405 */
+ return 0; /* no, board is cpci405 */
else
- return -1; /* yes, board is cterm-m2 */
+ return -1; /* yes, board is cterm-m2 */
#endif
}
-
int cpci405_host(void)
{
if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
- return -1; /* yes, board is cpci405 host */
+ return -1; /* yes, board is cpci405 host */
else
- return 0; /* no, board is cpci405 adapter */
+ return 0; /* no, board is cpci405 adapter */
}
-
int cpci405_version(void)
{
unsigned long cntrl0Reg;
@@ -227,10 +226,10 @@
*/
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x03000000);
- out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00180000);
- out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00180000);
- udelay(1000); /* wait some time before reading input */
- value = in32(GPIO0_IR) & 0x00180000; /* get config bits */
+ out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
+ out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
+ udelay(1000); /* wait some time before reading input */
+ value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */
/*
* Restore GPIO settings
@@ -245,7 +244,7 @@
/* CS2==0 && CS3==1 -> version 2 */
return 2;
case 0x00100000:
- /* CS2==1 && CS3==0 -> version 3 */
+ /* CS2==1 && CS3==0 -> version 3 or 6U board */
return 3;
case 0x00000000:
/* CS2==0 && CS3==0 -> version 4 */
@@ -256,13 +255,11 @@
}
}
-
int misc_init_f (void)
{
return 0; /* dummy implementation */
}
-
int misc_init_r (void)
{
unsigned long cntrl0Reg;
@@ -283,7 +280,6 @@
* On CPCI-405 version 2 the environment is saved in eeprom!
* FPGA can be gzip compressed (malloc) and booted this late.
*/
-
if (cpci405_version() >= 2) {
/*
* Setup GPIO pins (CS6+CS7 as GPIO)
@@ -354,6 +350,7 @@
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
udelay(1000); /* wait 1ms */
+#ifdef CONFIG_CPCI405_6U
if (cpci405_version() == 3) {
volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR;
@@ -375,6 +372,7 @@
udelay(100);
*fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET);
}
+#endif
}
else {
puts("\n*** U-Boot Version does not match Board Version!\n");
@@ -425,7 +423,6 @@
return (0);
}
-
/*
* Check Board Identity:
*/
@@ -481,7 +478,7 @@
}
#ifndef CONFIG_CPCI405_VER2
- puts ("\nFPGA: ");
+ puts ("\nFPGA: ");
/* display infos on fpgaimage */
index = 15;
@@ -493,12 +490,6 @@
#endif
putc ('\n');
-
- /*
- * Disable sleep mode in LXT971
- */
- lxt971_no_sleep();
-
return 0;
}
@@ -511,22 +502,18 @@
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
-#if 0
- printf("\nmb0cf=%x\n", val); /* test-only */
- printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
+void reset_phy(void)
{
- /* TODO: XXX XXX XXX */
- printf ("test: 16 MB - ok\n");
+#ifdef CONFIG_LXT971_NO_SLEEP
- return (0);
+ /*
+ * Disable sleep mode in LXT971
+ */
+ lxt971_no_sleep();
+#endif
}
/* ------------------------------------------------------------------------- */
@@ -551,14 +538,47 @@
#endif /* CONFIG_IDE_RESET */
#endif /* CONFIG_CPCI405_VER2 */
+#if defined(CONFIG_PCI)
+void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char int_line = 0xff;
+
+ /*
+ * Write pci interrupt line register (cpci405 specific)
+ */
+ switch (PCI_DEV(dev) & 0x03) {
+ case 0:
+ int_line = 27 + 2;
+ break;
+ case 1:
+ int_line = 27 + 3;
+ break;
+ case 2:
+ int_line = 27 + 0;
+ break;
+ case 3:
+ int_line = 27 + 1;
+ break;
+ }
+
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+}
+
+int pci_pre_init(struct pci_controller *hose)
+{
+ hose->fixup_irq = cpci405_pci_fixup_irq;
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
#ifdef CONFIG_CPCI405AB
-#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
+#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
|= CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
+#define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
&= ~CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \
+#define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \
& CFG_FPGA_MODE_1WIRE)
/*
@@ -581,7 +601,6 @@
return result;
}
-
/*
* Send 1 a 1-wire write bit.
* Provide 10us recovery time.
@@ -607,7 +626,6 @@
}
}
-
/*
* Read a bit from the 1-wire bus and return it.
* Provide 10us recovery time.
@@ -627,7 +645,6 @@
return result;
}
-
void OWWriteByte(int data)
{
int loop;
@@ -638,7 +655,6 @@
}
}
-
int OWReadByte(void)
{
int loop, result = 0;
@@ -653,7 +669,6 @@
return result;
}
-
int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
volatile unsigned short val;
@@ -694,7 +709,6 @@
NULL
);
-
#define CFG_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT28WC32 */
#define CFG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars*/
diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c
index a523db1..8fd081f 100644
--- a/board/hermes/hermes.c
+++ b/board/hermes/hermes.c
@@ -597,6 +597,7 @@
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ if (status < -32) status = -1; /* let things compatible */
status ^= 0x0F;
status = (status & 0x0F) << 14;
immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status;
diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c
index 14fd28f..897787b 100644
--- a/board/logodl/logodl.c
+++ b/board/logodl/logodl.c
@@ -107,6 +107,7 @@
void show_boot_progress (int status)
{
+ if (status < -32) status = -1; /* let things compatible */
/*
switch(status) {
case 1: logodl_set_led(0,1); break;
diff --git a/board/lwmon5/Makefile b/board/lwmon5/Makefile
new file mode 100644
index 0000000..06ef7f9
--- /dev/null
+++ b/board/lwmon5/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o sdram.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/lwmon5/config.mk b/board/lwmon5/config.mk
new file mode 100644
index 0000000..bf2b879
--- /dev/null
+++ b/board/lwmon5/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# lwmon5 (440EPx)
+#
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/lwmon5/init.S b/board/lwmon5/init.S
new file mode 100644
index 0000000..6798e80
--- /dev/null
+++ b/board/lwmon5/init.S
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+#ifdef CFG_INIT_RAM_DCACHE
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry(CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+#endif
+
+ /* TLB-entry for PCI Memory */
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I)
+
+ /* TLB-entry for the FPGA Chip select 2 */
+ tlbentry(CFG_FPGA_BASE_0, SZ_1M, CFG_FPGA_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+
+ /* TLB-entry for the FPGA Chip select 3 */
+ tlbentry(CFG_FPGA_BASE_1, SZ_1M, CFG_FPGA_BASE_1, 1,AC_R|AC_W|AC_X|SA_I|SA_G)
+
+ /* TLB-entry for the LIME Controller */
+ tlbentry(CFG_LIME_BASE_0, SZ_16M, CFG_LIME_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+ tlbentry(CFG_LIME_BASE_1, SZ_16M, CFG_LIME_BASE_1, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+ tlbentry(CFG_LIME_BASE_2, SZ_16M, CFG_LIME_BASE_2, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+ tlbentry(CFG_LIME_BASE_3, SZ_16M, CFG_LIME_BASE_3, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+
+ /* TLB-entry for Internal Registers & OCM */
+ tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I)
+
+ /*TLB-entry PCI registers*/
+ tlbentry(0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ /* TLB-entry for peripherals */
+ tlbentry(0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ tlbtab_end
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
new file mode 100644
index 0000000..d916284
--- /dev/null
+++ b/board/lwmon5/lwmon5.c
@@ -0,0 +1,465 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc440.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+ulong flash_get_size (ulong base, int banknum);
+
+int board_early_init_f(void)
+{
+ u32 sdr0_pfc1, sdr0_pfc2;
+ u32 reg;
+
+ /* PLB Write pipelining disabled. Denali Core workaround */
+ mtdcr(plb0_acr, 0xDE000000);
+ mtdcr(plb1_acr, 0xDE000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all. if write with 1 then the status is cleared */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000000); /* we have not critical interrupts at the moment */
+ mtdcr(uic0pr, 0xfffff7ff); /* Adjustment of the polarity */
+ mtdcr(uic0tr, 0x00000810); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xFFFFC7AD); /* Adjustment of the polarity */
+ mtdcr(uic1tr, 0x0600384A); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0x27C00000); /* Adjustment of the polarity */
+ mtdcr(uic2tr, 0xDFC00000); /* per ref-board manual */
+ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
+ mtdcr(uic2sr, 0xffffffff); /* clear all. Why this??? */
+
+ /* Trace Pins are disabled. SDR0_PFC0 Register */
+ mtsdr(SDR0_PFC0, 0x0);
+
+ /* select Ethernet pins */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ /* SMII via ZMII */
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+ SDR0_PFC1_SELECT_CONFIG_6;
+ mfsdr(SDR0_PFC2, sdr0_pfc2);
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+ SDR0_PFC2_SELECT_CONFIG_6;
+
+ /* enable SPI (SCP) */
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
+
+ mtsdr(SDR0_PFC2, sdr0_pfc2);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ mtsdr(SDR0_PFC4, 0x80000000);
+
+ /* PCI arbiter disabled */
+ /* PCI Host Configuration disbaled */
+ mfsdr(sdr_pci0, reg);
+ reg = 0;
+ mtsdr(sdr_pci0, 0x00000000 | reg);
+
+ gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------------+
+ | misc_init_r.
+ +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+ u32 pbcr;
+ int size_val = 0;
+ u32 reg;
+ unsigned long usb2d0cr = 0;
+ unsigned long usb2phy0cr, usb2h0cr = 0;
+ unsigned long sdr0_pfc1;
+
+ /*
+ * FLASH stuff...
+ */
+
+ /* Re-do sizing to get full correct info */
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+ mfebc(pb0cr, pbcr);
+ switch (gd->bd->bi_flashsize) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ case 32 << 20:
+ size_val = 5;
+ break;
+ case 64 << 20:
+ size_val = 6;
+ break;
+ case 128 << 20:
+ size_val = 7;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+ mtebc(pb0cr, pbcr);
+
+ /*
+ * Re-check to get correct base address
+ */
+ flash_get_size(gd->bd->bi_flashstart, 0);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ /* Env protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+
+ /*
+ * USB suff...
+ */
+ /* SDR Setting */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+
+ /* An 8-bit/60MHz interface is the only possible alternative
+ when connecting the Device to the PHY */
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
+
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+ mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ /*
+ * Clear resets
+ */
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Host(int phy) Device(ext phy)\n");
+
+ /*
+ * Clear PLB4A0_ACR[WRP]
+ * This fix will make the MAL burst disabling patch for the Linux
+ * EMAC driver obsolete.
+ */
+ reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+ mtdcr(plb4_acr, reg);
+
+ /*
+ * Reset Lime controller
+ */
+ gpio_write_bit(CFG_GPIO_LIME_S, 1);
+ udelay(500);
+ gpio_write_bit(CFG_GPIO_LIME_RST, 1);
+
+ /* Lime memory clock adjusted to 133MHz */
+ out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_133MHZ);
+ /* Wait untill time expired. Because of requirements in lime manual */
+ udelay(300);
+ /* Write lime controller memory parameters */
+ out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
+
+ /*
+ * Reset PHY's
+ */
+ gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
+ gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+ udelay(100);
+ gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+ gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ printf("Board: lwmon5");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_MBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long addr;
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440EPX PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Cactus is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+void hw_watchdog_reset(void)
+{
+ int val;
+
+ /*
+ * Toggle watchdog output
+ */
+ val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0;
+ gpio_write_bit(CFG_GPIO_WATCHDOG, val);
+}
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
new file mode 100644
index 0000000..9a4a8ee
--- /dev/null
+++ b/board/lwmon5/sdram.c
@@ -0,0 +1,662 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <ppc440.h>
+
+#include "sdram.h"
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CFG_ENABLE_SDRAM_CACHE
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+void dcbz_area(u32 start_address, u32 num_bytes);
+void dflush(void);
+
+#ifdef CONFIG_ADD_RAM_INFO
+static u32 is_ecc_enabled(void)
+{
+ u32 val;
+
+ mfsdram(DDR0_22, val);
+ val &= DDR0_22_CTRL_RAW_MASK;
+ if (val)
+ return 1;
+ else
+ return 0;
+}
+
+void board_add_ram_info(int use_default)
+{
+ PPC440_SYS_INFO board_cfg;
+ u32 val;
+
+ if (is_ecc_enabled())
+ puts(" (ECC");
+ else
+ puts(" (ECC not");
+
+ get_sys_info(&board_cfg);
+ printf(" enabled, %d MHz", (board_cfg.freqPLB * 2) / 1000000);
+
+ mfsdram(DDR0_03, val);
+ val = DDR0_03_CASLAT_DECODE(val);
+ printf(", CL%d)", val);
+}
+#endif
+
+static int wait_for_dlllock(void)
+{
+ u32 val;
+ int wait = 0;
+
+ /*
+ * Wait for the DCC master delay line to finish calibration
+ */
+ mtdcr(ddrcfga, DDR0_17);
+ val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
+ /* dlllockreg bit on */
+ return 0;
+ else
+ wait++;
+ }
+ debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+ debug("Waiting for dlllockreg bit to raise\n");
+
+ return -1;
+}
+
+#if defined(CONFIG_DDR_DATA_EYE)
+int wait_for_dram_init_complete(void)
+{
+ u32 val;
+ int wait = 0;
+
+ /*
+ * Wait for 'DRAM initialization complete' bit in status register
+ */
+ mtdcr(ddrcfga, DDR0_00);
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+ /* 'DRAM initialization complete' bit */
+ return 0;
+ else
+ wait++;
+ }
+
+ debug("DRAM initialization complete bit in status register did not rise\n");
+
+ return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+void denali_core_search_data_eye(u32 start_addr, u32 memory_size)
+{
+ int k, j;
+ u32 val;
+ u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+ u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+ u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+ u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+ volatile u32 *ram_pointer;
+ u32 test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+ ram_pointer = (volatile u32 *)start_addr;
+
+ for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+ /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
+
+ /*
+ * De-assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /*
+ * Set 'wr_dqs_shift'
+ */
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+
+ /*
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ */
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+
+ passing_cases = 0;
+
+ for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
+ /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
+ /*
+ * Set 'dll_dqs_delay_X'.
+ */
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /*
+ * Assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /*
+ * Wait for the DCC master delay line to finish calibration
+ */
+ if (wait_for_dlllock() != 0) {
+ printf("dlllock did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+ wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ ppcMsync();
+ ppcMbar();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+ wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+
+ /* write values */
+ for (j=0; j<NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j=0; j<NUM_TRIES; j++) {
+ for (k=0; k<NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* See if the dll_dqs_delay_X value passed.*/
+ if (j < NUM_TRIES) {
+ /* Failed */
+ passing_cases = 0;
+ /* break; */
+ } else {
+ /* Passed */
+ if (passing_cases == 0)
+ dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
+ passing_cases++;
+ if (passing_cases >= max_passing_cases) {
+ max_passing_cases = passing_cases;
+ wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
+ dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
+ dll_dqs_delay_X_end_window = dll_dqs_delay_X;
+ }
+ }
+
+ /*
+ * De-assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+
+ } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+ /*
+ * Largest passing window is now detected.
+ */
+
+ /* Compute dll_dqs_delay_X value */
+ dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
+ wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+ debug("DQS calibration - Window detected:\n");
+ debug("max_passing_cases = %d\n", max_passing_cases);
+ debug("wr_dqs_shift = %d\n", wr_dqs_shift);
+ debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
+ debug("dll_dqs_delay_X window = %d - %d\n",
+ dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+ /*
+ * De-assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /*
+ * Set 'wr_dqs_shift'
+ */
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_09=0x%08lx\n", val);
+
+ /*
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ */
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_22=0x%08lx\n", val);
+
+ /*
+ * Set 'dll_dqs_delay_X'.
+ */
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_17=0x%08lx\n", val);
+
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_18=0x%08lx\n", val);
+
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_19=0x%08lx\n", val);
+
+ /*
+ * Assert 'start' parameter.
+ */
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /*
+ * Wait for the DCC master delay line to finish calibration
+ */
+ if (wait_for_dlllock() != 0) {
+ printf("dlllock did not occur !!!\n");
+ hang();
+ }
+ ppcMsync();
+ ppcMbar();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* CONFIG_DDR_DATA_EYE */
+
+#ifdef CONFIG_DDR_ECC
+static void wait_ddr_idle(void)
+{
+ /*
+ * Controller idle status cannot be determined for Denali
+ * DDR2 code. Just return here.
+ */
+}
+
+static void blank_string(int size)
+{
+ int i;
+
+ for (i=0; i<size; i++)
+ putc('\b');
+ for (i=0; i<size; i++)
+ putc(' ');
+ for (i=0; i<size; i++)
+ putc('\b');
+}
+
+static void program_ecc(u32 start_address,
+ u32 num_bytes,
+ u32 tlb_word2_i_value)
+{
+ u32 current_address;
+ u32 end_address;
+ u32 address_increment;
+ u32 val;
+ char str[] = "ECC generation -";
+ char slash[] = "\\|/-\\|/-";
+ int loop = 0;
+ int loopi = 0;
+
+ current_address = start_address;
+
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
+ /* ECC bit set method for non-cached memory */
+ address_increment = 4;
+ end_address = current_address + num_bytes;
+
+ puts(str);
+
+ while (current_address < end_address) {
+ *((u32 *)current_address) = 0x00000000;
+ current_address += address_increment;
+
+ if ((loop++ % (2 << 20)) == 0) {
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+ }
+ }
+
+ blank_string(strlen(str));
+ } else {
+ /* ECC bit set method for cached memory */
+#if 1 /* test-only: will remove this define later, when ECC problems are solved! */
+ /*
+ * Some boards (like lwmon5) need to preserve the memory
+ * content upon ECC generation (for the log-buffer).
+ * Therefore we don't fill the memory with a pattern or
+ * just zero it, but write the same values back that are
+ * already in the memory cells.
+ */
+ address_increment = CFG_CACHELINE_SIZE;
+ end_address = current_address + num_bytes;
+
+ current_address = start_address;
+ while (current_address < end_address) {
+ ppcDcbi(current_address);
+ ppcDcbf(current_address);
+ current_address += CFG_CACHELINE_SIZE;
+ }
+#else
+ dcbz_area(start_address, num_bytes);
+ dflush();
+#endif
+ }
+
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ /* Clear error status */
+ mfsdram(DDR0_00, val);
+ mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+
+ /* Set 'int_mask' parameter to functionnal value */
+ mfsdram(DDR0_01, val);
+ mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
+
+ sync();
+ eieio();
+ wait_ddr_idle();
+}
+#endif
+
+static __inline__ u32 get_mcsr(void)
+{
+ u32 val;
+
+ asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
+ return val;
+}
+
+static __inline__ void set_mcsr(u32 val)
+{
+ asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
+}
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+ u32 val;
+
+#if 0 /* test-only: will remove this define later, when ECC problems are solved! */
+ /* CL=3 */
+ mtsdram(DDR0_02, 0x00000000);
+
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02030603); /* A suitable burst length was taken. CAS is right for our board */
+
+ mtsdram(DDR0_04, 0x0A030300);
+ mtsdram(DDR0_05, 0x02020308);
+ mtsdram(DDR0_06, 0x0103C812);
+ mtsdram(DDR0_07, 0x00090100);
+ mtsdram(DDR0_08, 0x02c80001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000300);
+ mtsdram(DDR0_11, 0x000CC800);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x1e000000);
+ mtsdram(DDR0_18, 0x1e1e1e1e);
+ mtsdram(DDR0_19, 0x1e1e1e1e);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+ mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
+#else
+ mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+ mtsdram(DDR0_23, 0x01000000);
+ mtsdram(DDR0_24, 0x01010001);
+
+ mtsdram(DDR0_26, 0x2D93028A);
+ mtsdram(DDR0_27, 0x0784682B);
+
+ mtsdram(DDR0_28, 0x00000080);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000006);
+
+ mtsdram(DDR0_43, 0x030A0200);
+ mtsdram(DDR0_44, 0x00000003);
+ mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+#else
+ /* CL=4 */
+ mtsdram(DDR0_02, 0x00000000);
+
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
+
+ mtsdram(DDR0_04, 0x0B030300);
+ mtsdram(DDR0_05, 0x02020308);
+ mtsdram(DDR0_06, 0x0003C812);
+ mtsdram(DDR0_07, 0x00090100);
+ mtsdram(DDR0_08, 0x03c80001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000300);
+ mtsdram(DDR0_11, 0x000CC800);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x1e000000);
+ mtsdram(DDR0_18, 0x1e1e1e1e);
+ mtsdram(DDR0_19, 0x1e1e1e1e);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+ mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
+#else
+ mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+ mtsdram(DDR0_23, 0x01000000);
+ mtsdram(DDR0_24, 0x01010001);
+
+ mtsdram(DDR0_26, 0x2D93028A);
+ mtsdram(DDR0_27, 0x0784682B);
+
+ mtsdram(DDR0_28, 0x00000080);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000008);
+
+ mtsdram(DDR0_43, 0x050A0200);
+ mtsdram(DDR0_44, 0x00000005);
+ mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+#endif
+
+ wait_for_dlllock();
+
+ /*
+ * Program tlb entries for this size (dynamic)
+ */
+ program_tlb(0, 0, CFG_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE);
+
+ /*
+ * Setup 2nd TLB with same physical address but different virtual address
+ * with cache enabled. This is done for fast ECC generation.
+ */
+ program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+
+#ifdef CONFIG_DDR_DATA_EYE
+ /*
+ * Perform data eye search if requested.
+ */
+ denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20);
+
+ /*
+ * Clear possible errors resulting from data-eye-search.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ val = get_mcsr();
+ set_mcsr(val);
+#endif
+
+#ifdef CONFIG_DDR_ECC
+ /*
+ * If ECC is enabled, initialize the parity bits.
+ */
+ program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+#endif
+
+ return (CFG_MBYTES_SDRAM << 20);
+}
diff --git a/board/lwmon5/sdram.h b/board/lwmon5/sdram.h
new file mode 100644
index 0000000..7f847aa
--- /dev/null
+++ b/board/lwmon5/sdram.h
@@ -0,0 +1,505 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPD_SDRAM_DENALI_H_
+#define _SPD_SDRAM_DENALI_H_
+
+#define ppcMsync sync
+#define ppcMbar eieio
+
+/* General definitions */
+#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */
+#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */
+#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */
+#define SDRAM_NONE 0 /* No DIMM detected in Slot */
+#define MAXRANKS 2 /* 2 ranks maximum */
+
+/* Supported PLB Frequencies */
+#define PLB_FREQ_133MHZ 133333333
+#define PLB_FREQ_152MHZ 152000000
+#define PLB_FREQ_160MHZ 160000000
+#define PLB_FREQ_166MHZ 166666666
+
+/* Denali Core Registers */
+#define SDRAM_DCR_BASE 0x10
+
+#define DDR_DCR_BASE 0x10
+#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
+#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
+
+/*-----------------------------------------------------------------------------+
+ | Values for ddrcfga register - indirect addressing of these regs
+ +-----------------------------------------------------------------------------*/
+
+#define DDR0_00 0x00
+#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
+#define DDR0_00_INT_ACK_ALL 0x7F000000
+#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+/* Status */
+#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
+/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT0 0x00010000
+/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT1 0x00020000
+/* Bit2. Single correctable ECC event detected */
+#define DDR0_00_INT_STATUS_BIT2 0x00040000
+/* Bit3. Multiple correctable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT3 0x00080000
+/* Bit4. Single uncorrectable ECC event detected. */
+#define DDR0_00_INT_STATUS_BIT4 0x00100000
+/* Bit5. Multiple uncorrectable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT5 0x00200000
+/* Bit6. DRAM initialization complete. */
+#define DDR0_00_INT_STATUS_BIT6 0x00400000
+/* Bit7. Logical OR of all lower bits. */
+#define DDR0_00_INT_STATUS_BIT7 0x00800000
+
+#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
+#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
+#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_01 0x01
+#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
+#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
+#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
+#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_01_INT_MASK_MASK 0x000000FF
+#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
+#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
+
+#define DDR0_02 0x02
+#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
+#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24)
+#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2)
+#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
+#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
+#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_02_START_MASK 0x00000001
+#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+#define DDR0_02_START_OFF 0x00000000
+#define DDR0_02_START_ON 0x00000001
+
+#define DDR0_03 0x03
+#define DDR0_03_BSTLEN_MASK 0x07000000
+#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_03_CASLAT_MASK 0x00070000
+#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
+#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_03_INITAREF_MASK 0x0000000F
+#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_04 0x04
+#define DDR0_04_TRC_MASK 0x1F000000
+#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_04_TRRD_MASK 0x00070000
+#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_04_TRTP_MASK 0x00000700
+#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+
+#define DDR0_05 0x05
+#define DDR0_05_TMRD_MASK 0x1F000000
+#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_05_TEMRS_MASK 0x00070000
+#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_05_TRP_MASK 0x00000F00
+#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_05_TRAS_MIN_MASK 0x000000FF
+#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+
+#define DDR0_06 0x06
+#define DDR0_06_WRITEINTERP_MASK 0x01000000
+#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_06_TWTR_MASK 0x00070000
+#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_06_TDLL_MASK 0x0000FF00
+#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_06_TRFC_MASK 0x0000007F
+#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_07 0x07
+#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
+#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_07_TFAW_MASK 0x001F0000
+#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
+#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_07_AREFRESH_MASK 0x00000001
+#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_08 0x08
+#define DDR0_08_WRLAT_MASK 0x07000000
+#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_08_TCPD_MASK 0x00FF0000
+#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_08_DQS_N_EN_MASK 0x00000100
+#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
+#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_09 0x09
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_09_RTT_0_MASK 0x00030000
+#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
+#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_10 0x0A
+#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
+#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_10_CS_MAP_MASK 0x00000300
+#define DDR0_10_CS_MAP_NO_MEM 0x00000000
+#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
+#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
+#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
+
+#define DDR0_11 0x0B
+#define DDR0_11_SREFRESH_MASK 0x01000000
+#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_11_TXSNR_MASK 0x00FF0000
+#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_11_TXSR_MASK 0x0000FF00
+#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+
+#define DDR0_12 0x0C
+#define DDR0_12_TCKE_MASK 0x0000007
+#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
+#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7)
+
+#define DDR0_13 0x0D
+
+#define DDR0_14 0x0E
+#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
+#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_14_REDUC_MASK 0x00010000
+#define DDR0_14_REDUC_64BITS 0x00000000
+#define DDR0_14_REDUC_32BITS 0x00010000
+#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
+#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+
+#define DDR0_15 0x0F
+
+#define DDR0_16 0x10
+
+#define DDR0_17 0x11
+#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
+#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
+#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
+#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
+#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
+#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+
+#define DDR0_18 0x12
+#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
+#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
+#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
+#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
+#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
+#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_19 0x13
+#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
+#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
+#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
+#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
+#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
+#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_20 0x14
+#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
+#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
+#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
+#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
+#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_21 0x15
+#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
+#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
+#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
+#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
+#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_22 0x16
+/* ECC */
+#define DDR0_22_CTRL_RAW_MASK 0x03000000
+#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */
+#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/
+#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */
+#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */
+#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
+#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
+#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_23 0x17
+#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
+#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
+#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
+#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
+#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_24 0x18
+#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
+#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
+#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
+#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
+#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0)
+#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3)
+
+#define DDR0_25 0x19
+#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
+#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
+#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_26 0x1A
+#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
+#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_26_TREF_MASK 0x00003FFF
+#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_27 0x1B
+#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
+#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_27_TINIT_MASK 0x0000FFFF
+#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_28 0x1C
+#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
+#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
+#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
+
+#define DDR0_29 0x1D
+
+#define DDR0_30 0x1E
+
+#define DDR0_31 0x1F
+#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
+#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_32 0x20
+#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_33 0x21
+#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_34 0x22
+#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_35 0x23
+#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_36 0x24
+#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_37 0x25
+#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_38 0x26
+#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_39 0x27
+#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_40 0x28
+#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_41 0x29
+#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_42 0x2A
+#define DDR0_42_ADDR_PINS_MASK 0x07000000
+#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
+#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_43 0x2B
+#define DDR0_43_TWR_MASK 0x07000000
+#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_43_APREBIT_MASK 0x000F0000
+#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
+#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
+#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_44 0x2C
+#define DDR0_44_TRCD_MASK 0x000000FF
+#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+
+#endif /* _SPD_SDRAM_DENALI_H_ */
diff --git a/board/lwmon5/u-boot.lds b/board/lwmon5/u-boot.lds
new file mode 100644
index 0000000..a423f98
--- /dev/null
+++ b/board/lwmon5/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/pcs440ep/config.mk b/board/pcs440ep/config.mk
index 319c4fa..4d942eb 100644
--- a/board/pcs440ep/config.mk
+++ b/board/pcs440ep/config.mk
@@ -25,6 +25,9 @@
# PCS440EP board
#
+# Check the U-Boot Image with a SHA1 checksum
+ALL += $(obj)u-boot.sha1
+
#TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
diff --git a/board/pcs440ep/flash.c b/board/pcs440ep/flash.c
index ece5478..7001440 100644
--- a/board/pcs440ep/flash.c
+++ b/board/pcs440ep/flash.c
@@ -83,6 +83,7 @@
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break;
+ case FLASH_MAN_MX: printf ("MXIC "); break;
default: printf ("Unknown Vendor "); break;
}
@@ -195,6 +196,9 @@
case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
info->flash_id = FLASH_MAN_EXCEL;
break;
+ case (CFG_FLASH_WORD_SIZE)MX_MANUFACT:
+ info->flash_id = FLASH_MAN_MX;
+ break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
diff --git a/board/pcs440ep/init.S b/board/pcs440ep/init.S
index 0eee4d8..36a40c9 100644
--- a/board/pcs440ep/init.S
+++ b/board/pcs440ep/init.S
@@ -87,27 +87,32 @@
.globl tlbtab
tlbtab:
- tlbtab_start
+ tlbtab_start
- /*
- * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
- * speed up boot process. It is patched after relocation to enable SA_I
- */
- tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+ tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
- /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
- tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR detection
+ * routine.
+ */
- /* PCI */
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
- /* USB 2.0 Device */
- tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+ /* PCI */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
- tlbtab_end
+ /* USB 2.0 Device */
+ tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+ tlbtab_end
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 8858f0a..ada6b82 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -23,20 +23,112 @@
#include <common.h>
#include <ppc4xx.h>
+#include <malloc.h>
+#include <command.h>
+#include <crc.h>
#include <asm/processor.h>
#include <spd_sdram.h>
+#include <status_led.h>
+#include <sha1.h>
DECLARE_GLOBAL_DATA_PTR;
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-static void set_leds(int val)
+unsigned char sha1_checksum[SHA1_SUM_LEN];
+
+/* swap 4 Bits (Bit0 = Bit3, Bit1 = Bit2, Bit2 = Bit1 and Bit3 = Bit0) */
+unsigned char swapbits[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
+ 0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf};
+
+static void set_leds (int val)
{
- unsigned char led[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
- 0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf};
- out32(GPIO0_OR, (in32(GPIO0_OR) & ~0x78000000) | (led[val] << 27));
+ out32(GPIO0_OR, (in32 (GPIO0_OR) & ~0x78000000) | (val << 27));
}
+#define GET_LEDS ((in32 (GPIO0_OR) & 0x78000000) >> 27)
+
+void __led_init (led_id_t mask, int state)
+{
+ int val = GET_LEDS;
+
+ if (state == STATUS_LED_ON)
+ val |= mask;
+ else
+ val &= ~mask;
+ set_leds (val);
+}
+
+void __led_set (led_id_t mask, int state)
+{
+ int val = GET_LEDS;
+
+ if (state == STATUS_LED_ON)
+ val |= mask;
+ else if (state == STATUS_LED_OFF)
+ val &= ~mask;
+ set_leds (val);
+}
+
+void __led_toggle (led_id_t mask)
+{
+ int val = GET_LEDS;
+
+ val ^= mask;
+ set_leds (val);
+}
+
+static void status_led_blink (void)
+{
+ int i;
+ int val = GET_LEDS;
+
+ /* set all LED which are on, to state BLINKING */
+ for (i = 0; i < 4; i++) {
+ if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING);
+ val = val << 1;
+ }
+}
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress (int val)
+{
+ /* find all valid Codes for val in README */
+ if (val == -30) return;
+ if (val < 0) {
+ /* smthing goes wrong */
+ status_led_blink ();
+ return;
+ }
+ switch (val) {
+ case 1:
+ /* validating Image */
+ status_led_set (0, STATUS_LED_OFF);
+ status_led_set (1, STATUS_LED_ON);
+ status_led_set (2, STATUS_LED_ON);
+ break;
+ case 15:
+ /* booting */
+ status_led_set (0, STATUS_LED_ON);
+ status_led_set (1, STATUS_LED_ON);
+ status_led_set (2, STATUS_LED_ON);
+ break;
+ case 64:
+ /* starting Ethernet configuration */
+ status_led_set (0, STATUS_LED_OFF);
+ status_led_set (1, STATUS_LED_OFF);
+ status_led_set (2, STATUS_LED_ON);
+ break;
+ case 80:
+ /* loading Image */
+ status_led_set (0, STATUS_LED_ON);
+ status_led_set (1, STATUS_LED_OFF);
+ status_led_set (2, STATUS_LED_ON);
+ break;
+ }
+}
+#endif
+
int board_early_init_f(void)
{
register uint reg;
@@ -85,6 +177,251 @@
return 0;
}
+#define EEPROM_LEN 256
+void load_sernum_ethaddr (void)
+{
+ int ret;
+ char buf[EEPROM_LEN];
+ char mac[32];
+ char *use_eeprom;
+ u16 checksumcrc16 = 0;
+
+ /* read the MACs from EEprom */
+ status_led_set (0, STATUS_LED_ON);
+ status_led_set (1, STATUS_LED_ON);
+ ret = eeprom_read (CFG_I2C_EEPROM_ADDR, 0, (uchar *)buf, EEPROM_LEN);
+ if (ret == 0) {
+ checksumcrc16 = cyg_crc16 ((uchar *)buf, EEPROM_LEN - 2);
+ /* check, if the EEprom is programmed:
+ * - The Prefix(Byte 0,1,2) is equal to "ATR"
+ * - The checksum, stored in the last 2 Bytes, is correct
+ */
+ if ((strncmp (buf,"ATR",3) != 0) ||
+ ((checksumcrc16 >> 8) != buf[EEPROM_LEN - 2]) ||
+ ((checksumcrc16 & 0xff) != buf[EEPROM_LEN - 1])) {
+ /* EEprom is not programmed */
+ printf("%s: EEPROM Checksum not OK\n", __FUNCTION__);
+ } else {
+ /* get the MACs */
+ sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x",
+ buf[3],
+ buf[4],
+ buf[5],
+ buf[6],
+ buf[7],
+ buf[8]);
+ setenv ("ethaddr", (char *) mac);
+ sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x",
+ buf[9],
+ buf[10],
+ buf[11],
+ buf[12],
+ buf[13],
+ buf[14]);
+ setenv ("eth1addr", (char *) mac);
+ return;
+ }
+ }
+
+ /* some error reading the EEprom */
+ if ((use_eeprom = getenv ("use_eeprom_ethaddr")) == NULL) {
+ /* dont use bootcmd */
+ setenv("bootdelay", "-1");
+ return;
+ }
+ /* == default ? use standard */
+ if (strncmp (use_eeprom, "default", 7) == 0) {
+ return;
+ }
+ /* Env doesnt exist -> hang */
+ status_led_blink ();
+ hang ();
+ return;
+}
+
+#ifdef CONFIG_PREBOOT
+
+static uchar kbd_magic_prefix[] = "key_magic";
+static uchar kbd_command_prefix[] = "key_cmd";
+
+struct kbd_data_t {
+ char s1;
+ char s2;
+};
+
+struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
+{
+ char *val;
+ unsigned long tmp;
+
+ /* use the DIPs for some bootoptions */
+ val = getenv (ENV_NAME_DIP);
+ tmp = simple_strtoul (val, NULL, 16);
+
+ kbd_data->s2 = (tmp & 0x0f);
+ kbd_data->s1 = (tmp & 0xf0) >> 4;
+ return kbd_data;
+}
+
+static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
+{
+ char s1 = str[0];
+
+ if (s1 >= '0' && s1 <= '9')
+ s1 -= '0';
+ else if (s1 >= 'a' && s1 <= 'f')
+ s1 = s1 - 'a' + 10;
+ else if (s1 >= 'A' && s1 <= 'F')
+ s1 = s1 - 'A' + 10;
+ else
+ return -1;
+
+ if (s1 != kbd_data->s1) return -1;
+
+ s1 = str[1];
+ if (s1 >= '0' && s1 <= '9')
+ s1 -= '0';
+ else if (s1 >= 'a' && s1 <= 'f')
+ s1 = s1 - 'a' + 10;
+ else if (s1 >= 'A' && s1 <= 'F')
+ s1 = s1 - 'A' + 10;
+ else
+ return -1;
+
+ if (s1 != kbd_data->s2) return -1;
+ return 0;
+}
+
+static char *key_match (const struct kbd_data_t *kbd_data)
+{
+ char magic[sizeof (kbd_magic_prefix) + 1];
+ char *suffix;
+ char *kbd_magic_keys;
+
+ /*
+ * The following string defines the characters that can be appended
+ * to "key_magic" to form the names of environment variables that
+ * hold "magic" key codes, i. e. such key codes that can cause
+ * pre-boot actions. If the string is empty (""), then only
+ * "key_magic" is checked (old behaviour); the string "125" causes
+ * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
+ */
+ if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+ kbd_magic_keys = "";
+
+ /* loop over all magic keys;
+ * use '\0' suffix in case of empty string
+ */
+ for (suffix = kbd_magic_keys; *suffix ||
+ suffix == kbd_magic_keys; ++suffix) {
+ sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+ if (compare_magic (kbd_data, getenv (magic)) == 0) {
+ char cmd_name[sizeof (kbd_command_prefix) + 1];
+ char *cmd;
+
+ sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+ cmd = getenv (cmd_name);
+
+ return (cmd);
+ }
+ }
+ return (NULL);
+}
+
+#endif /* CONFIG_PREBOOT */
+
+static int pcs440ep_readinputs (void)
+{
+ int i;
+ char value[20];
+
+ /* read the inputs and set the Envvars */
+ /* Revision Level Bit 26 - 29 */
+ i = ((in32 (GPIO0_IR) & 0x0000003c) >> 2);
+ i = swapbits[i];
+ sprintf (value, "%02x", i);
+ setenv (ENV_NAME_REVLEV, value);
+ /* Solder Switch Bit 30 - 33 */
+ i = (in32 (GPIO0_IR) & 0x00000003) << 2;
+ i += (in32 (GPIO1_IR) & 0xc0000000) >> 30;
+ i = swapbits[i];
+ sprintf (value, "%02x", i);
+ setenv (ENV_NAME_SOLDER, value);
+ /* DIP Switch Bit 49 - 56 */
+ i = ((in32 (GPIO1_IR) & 0x00007f80) >> 7);
+ i = (swapbits[i & 0x0f] << 4) + swapbits[(i & 0xf0) >> 4];
+ sprintf (value, "%02x", i);
+ setenv (ENV_NAME_DIP, value);
+ return 0;
+}
+
+
+#if defined(CONFIG_SHA1_CHECK_UB_IMG)
+/*************************************************************************
+ * calculate a SHA1 sum for the U-Boot image in Flash.
+ *
+ ************************************************************************/
+static int pcs440ep_sha1 (int docheck)
+{
+ unsigned char *data;
+ unsigned char *ptroff;
+ unsigned char output[20];
+ unsigned char org[20];
+ int i, len = CONFIG_SHA1_LEN;
+
+ memcpy ((char *)CFG_LOAD_ADDR, (char *)CONFIG_SHA1_START, len);
+ data = (unsigned char *)CFG_LOAD_ADDR;
+ ptroff = &data[len + SHA1_SUM_POS];
+
+ for (i = 0; i < SHA1_SUM_LEN; i++) {
+ org[i] = ptroff[i];
+ ptroff[i] = 0;
+ }
+
+ sha1_csum ((unsigned char *) data, len, (unsigned char *)output);
+
+ if (docheck == 2) {
+ for (i = 0; i < 20 ; i++) {
+ printf("%02X ", output[i]);
+ }
+ printf("\n");
+ }
+ if (docheck == 1) {
+ for (i = 0; i < 20 ; i++) {
+ if (org[i] != output[i]) return 1;
+ }
+ }
+ return 0;
+}
+
+/*************************************************************************
+ * do some checks after the SHA1 checksum from the U-Boot Image was
+ * calculated.
+ *
+ ************************************************************************/
+static void pcs440ep_checksha1 (void)
+{
+ int ret;
+ char *cs_test;
+
+ ret = pcs440ep_sha1 (1);
+ if (ret == 0) return;
+
+ if ((cs_test = getenv ("cs_test")) == NULL) {
+ /* Env doesnt exist -> hang */
+ status_led_blink ();
+ hang ();
+ }
+
+ if (strncmp (cs_test, "off", 3) == 0) {
+ printf ("SHA1 U-Boot sum NOT ok!\n");
+ setenv ("bootdelay", "-1");
+ }
+}
+#else
+static __inline__ void pcs440ep_checksha1 (void) { do {} while (0);}
+#endif
+
int misc_init_r (void)
{
uint pbcr;
@@ -139,6 +476,18 @@
CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
&flash_info[1]);
+ pcs440ep_readinputs ();
+ pcs440ep_checksha1 ();
+#ifdef CONFIG_PREBOOT
+ {
+ struct kbd_data_t kbd_data;
+ /* Decode keys */
+ char *str = strdup (key_match (get_keys (&kbd_data)));
+ /* Set or delete definition */
+ setenv ("preboot", str);
+ free (str);
+ }
+#endif /* CONFIG_PREBOOT */
return 0;
}
@@ -156,13 +505,31 @@
return (0);
}
+void spd_ddr_init_hang (void)
+{
+ status_led_set (0, STATUS_LED_OFF);
+ status_led_set (1, STATUS_LED_ON);
+ /* we cannot use hang() because we are still running from
+ Flash, and so the status_led driver is not initialized */
+ puts ("### ERROR ### Please RESET the board ###\n");
+ for (;;) {
+ __led_toggle (4);
+ udelay (100000);
+ }
+}
+
long int initdram (int board_type)
{
long dram_size = 0;
- set_leds(1); /* display boot info counter */
+ status_led_set (0, STATUS_LED_ON);
+ status_led_set (1, STATUS_LED_OFF);
dram_size = spd_sdram();
- set_leds(2); /* display boot info counter */
+ status_led_set (0, STATUS_LED_OFF);
+ status_led_set (1, STATUS_LED_ON);
+ if (dram_size == 0) {
+ hang();
+ }
return dram_size;
}
@@ -217,7 +584,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
@@ -258,7 +625,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
@@ -377,3 +744,119 @@
}
#endif
+
+/*************************************************************************
+ * "led" Commando for the U-Boot shell
+ *
+ ************************************************************************/
+int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int rcode = 0;
+ ulong pattern = 0;
+
+ pattern = simple_strtoul (argv[1], NULL, 10);
+ if (pattern > 200) {
+ status_led_blink ();
+ hang ();
+ return rcode;
+ }
+ if (pattern > 100) {
+ status_led_blink ();
+ return rcode;
+ }
+ pattern &= 0x0f;
+ set_leds (pattern);
+ return rcode;
+}
+
+U_BOOT_CMD(
+ led, 2, 1, do_led,
+ "led - set the led\n",
+ NULL
+);
+
+#if defined(CONFIG_SHA1_CHECK_UB_IMG)
+/*************************************************************************
+ * "sha1" Commando for the U-Boot shell
+ *
+ ************************************************************************/
+int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int rcode = -1;
+
+ if (argc < 2) {
+ usage:
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (argc >= 3) {
+ unsigned char *data;
+ unsigned char output[20];
+ int len;
+ int i;
+
+ data = (unsigned char *)simple_strtoul (argv[1], NULL, 16);
+ len = simple_strtoul (argv[2], NULL, 16);
+ sha1_csum (data, len, (unsigned char *)output);
+ printf ("U-Boot sum:\n");
+ for (i = 0; i < 20 ; i++) {
+ printf ("%02X ", output[i]);
+ }
+ printf ("\n");
+ if (argc == 4) {
+ data = (unsigned char *)simple_strtoul (argv[3], NULL, 16);
+ memcpy (data, output, 20);
+ }
+ return 0;
+ }
+ if (argc == 2) {
+ char *ptr = argv[1];
+ if (*ptr != '-') goto usage;
+ ptr++;
+ if ((*ptr == 'c') || (*ptr == 'C')) {
+ rcode = pcs440ep_sha1 (1);
+ printf ("SHA1 U-Boot sum %sok!\n", (rcode != 0) ? "not " : "");
+ } else if ((*ptr == 'p') || (*ptr == 'P')) {
+ rcode = pcs440ep_sha1 (2);
+ } else {
+ rcode = pcs440ep_sha1 (0);
+ }
+ return rcode;
+ }
+ return rcode;
+}
+
+U_BOOT_CMD(
+ sha1, 4, 1, do_sha1,
+ "sha1 - calculate the SHA1 Sum\n",
+ "address len [addr] calculate the SHA1 sum [save at addr]\n"
+ " -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
+ " -c check the U-Boot image in flash\n"
+);
+#endif
+
+#ifdef CONFIG_IDE_PREINIT
+int ide_preinit (void)
+{
+ /* Set True IDE Mode */
+ out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00100000));
+ out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000));
+ out32 (GPIO1_OR, (in32 (GPIO1_OR) & ~0x00008040));
+ udelay (100000);
+ return 0;
+}
+#endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+void ide_set_reset (int idereset)
+{
+ debug ("ide_reset(%d)\n", idereset);
+ if (idereset == 0) {
+ out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000));
+ } else {
+ out32 (GPIO0_OR, (in32 (GPIO0_OR) & ~0x00200000));
+ }
+ udelay (10000);
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/pcs440ep/u-boot.lds b/board/pcs440ep/u-boot.lds
index 6ab476a..6506ccd 100644
--- a/board/pcs440ep/u-boot.lds
+++ b/board/pcs440ep/u-boot.lds
@@ -65,6 +65,7 @@
{
cpu/ppc4xx/start.o (.text)
board/pcs440ep/init.o (.text)
+ lib_generic/sha1.o (.text)
*(.text)
*(.fixup)
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index 5abc87d..b764499 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -172,7 +172,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
@@ -192,7 +192,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c
index 2f28e9d..1a8aacb 100644
--- a/board/prodrive/p3p440/p3p440.c
+++ b/board/prodrive/p3p440/p3p440.c
@@ -176,7 +176,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long strap;
@@ -193,7 +193,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
index 7816472..8a831fa 100644
--- a/board/sandburst/common/sb_common.c
+++ b/board/sandburst/common/sb_common.c
@@ -313,7 +313,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
@@ -330,7 +330,7 @@
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index b6add59..f6f0e72 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -507,6 +507,7 @@
void show_boot_progress(int val)
{
+ if (val < -32) val = -1; /* let things compatible */
outb(val&0xff, 0x80);
outb((val&0xff00)>>8, 0x680);
}
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
index ed226fd..d119a7d 100644
--- a/board/sc520_spunk/sc520_spunk.c
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -507,6 +507,7 @@
{
int version = read_mmcr_byte(SC520_SYSINFO);
+ if (val < -32) val = -1; /* let things compatible */
if (version == 0) {
/* PIO31-PIO16 Data */
write_mmcr_word(SC520_PIODATA31_16,
diff --git a/board/smdk2400/lowlevel_init.S b/board/smdk2400/lowlevel_init.S
index a5de806..a7959f3 100644
--- a/board/smdk2400/lowlevel_init.S
+++ b/board/smdk2400/lowlevel_init.S
@@ -117,7 +117,7 @@
#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
#define Trp 0x0 /* 2 clk */
#define Trc 0x3 /* 7 clk */
-#define Tchr 0x2 /* 3 clk */
+#define Tchr 0x2 /* 3 clk */
#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c
index 0fb233d..5882124 100644
--- a/board/stxssa/stxssa.c
+++ b/board/stxssa/stxssa.c
@@ -52,147 +52,147 @@
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
- /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
- /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
- /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
- /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
- /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
- /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
- /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
- /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
- /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
- /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
- /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
- /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
- /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
- /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
- /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
- /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
- /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
- /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
- /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
- /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
- /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
- /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
- /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
- /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
- /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
- /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
- /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
- /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
- /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
- /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
- /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
+ /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
+ /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
+ /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
+ /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
+ /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
+ /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
+ /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
+ /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
+ /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
+ /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
+ /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
+ /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
+ /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
+ /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
+ /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
+ /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
+ /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
+ /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
+ /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
+ /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
+ /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
+ /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
+ /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
+ /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
+ /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
+ /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
+ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
+ /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
},
/* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
- /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
- /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
- /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
- /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
- /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
- /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
- /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
- /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
- /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
- /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
- /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
- /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
- /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
- /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
- /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
- /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
- /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
- /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
- /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
- /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
+ /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
+ /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
+ /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
+ /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
+ /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
+ /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
},
/* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
- /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
- /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
- /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
- /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
- /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
- /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
- /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
- /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
- /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
- /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
- /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
- /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
- /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
- /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
- /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
- /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */
- /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
- /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
- /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
- /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
- /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */
- /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */
- /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
- /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
- /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
- /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
- /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
- /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
- /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
- /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
- /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
+ /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
+ /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
+ /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
+ /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
+ /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
+ /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
+ /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
+ /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
+ /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
+ /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
+ /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
+ /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
+ /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
+ /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */
+ /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
+ /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
+ /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
+ /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
+ /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */
+ /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */
+ /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
+ /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
+ /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
+ /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
+ /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
+ /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
+ /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
+ /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
},
/* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
- /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
- /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
- /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
- /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TxD */
- /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
- /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
- /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
- /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
- /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
- /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
- /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
- /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
- /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
- /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
- /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
- /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C CLK */
- /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
- /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
- /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
- /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
- /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
- /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
- /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
- /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
- /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
- /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
+ /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
+ /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
+ /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
+ /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TxD */
+ /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
+ /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
+ /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
+ /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
+ /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
+ /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
+ /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
+ /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
+ /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
+ /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
+ /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C CLK */
+ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
+ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
+ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
+ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
+ /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
+ /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
+ /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
+ /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
+ /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
+ /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
}
};
@@ -227,12 +227,12 @@
#if (CONFIG_ETHER_INDEX == 2)
bcsr->bcsr2 &= ~FETH2_RST;
udelay(2);
- bcsr->bcsr2 |= FETH2_RST;
+ bcsr->bcsr2 |= FETH2_RST;
udelay(1000);
#elif (CONFIG_ETHER_INDEX == 3)
bcsr->bcsr3 &= ~FETH3_RST;
udelay(2);
- bcsr->bcsr3 |= FETH3_RST;
+ bcsr->bcsr3 |= FETH3_RST;
udelay(1000);
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
@@ -252,10 +252,10 @@
board_early_init_f(void)
{
#if defined(CONFIG_PCI)
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
- volatile ccsr_pcix_t *pci = &immr->im_pcix;
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_pcix_t *pci = &immr->im_pcix;
- pci->peer &= 0xfffffffdf; /* disable master abort */
+ pci->peer &= 0xffffffdf; /* disable master abort */
#endif
/* Why is the phy reset done _after_ the ethernet
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index a4322b6..cf97603 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -32,6 +32,10 @@
#include <pci.h>
#include <asm/processor.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
#ifdef CONFIG_VIDEO_SM501
#include <sm501.h>
#endif
@@ -775,3 +779,10 @@
}
#endif /* CONFIG_VIDEO_SM501 */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c
index a569b53..8411cf0 100644
--- a/board/xpedite1k/xpedite1k.c
+++ b/board/xpedite1k/xpedite1k.c
@@ -209,7 +209,7 @@
* certain pre-initialization actions.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
@@ -227,7 +227,7 @@
#endif
return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* pci_target_init
diff --git a/common/Makefile b/common/Makefile
index bc1f714..ef7d097 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -38,8 +38,8 @@
cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
cmd_nand.o cmd_net.o cmd_nvedit.o \
cmd_pci.o cmd_pcmcia.o cmd_portio.o \
- cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \
- cmd_usb.o cmd_vfd.o \
+ cmd_reginfo.o cmd_reiser.o cmd_sata.o cmd_scsi.o cmd_spi.o \
+ cmd_universe.o cmd_usb.o cmd_vfd.o \
command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
environment.o env_common.o \
env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
diff --git a/common/cmd_doc.c b/common/cmd_doc.c
index ab37516..4e624a2 100644
--- a/common/cmd_doc.c
+++ b/common/cmd_doc.c
@@ -216,6 +216,7 @@
image_header_t *hdr;
int rcode = 0;
+ SHOW_BOOT_PROGRESS (34);
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
@@ -236,24 +237,27 @@
break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-35);
return 1;
}
+ SHOW_BOOT_PROGRESS (35);
if (!boot_device) {
puts ("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-36);
return 1;
}
+ SHOW_BOOT_PROGRESS (36);
dev = simple_strtoul(boot_device, &ep, 16);
if ((dev >= CFG_MAX_DOC_DEVICE) ||
(doc_dev_desc[dev].ChipID == DOC_ChipID_UNKNOWN)) {
printf ("\n** Device %d not available\n", dev);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-37);
return 1;
}
+ SHOW_BOOT_PROGRESS (37);
printf ("\nLoading from device %d: %s at 0x%lX (offset 0x%lX)\n",
dev, doc_dev_desc[dev].name, doc_dev_desc[dev].physadr,
@@ -262,9 +266,10 @@
if (doc_rw (doc_dev_desc + dev, 1, offset,
SECTORSIZE, NULL, (u_char *)addr)) {
printf ("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-38);
return 1;
}
+ SHOW_BOOT_PROGRESS (38);
hdr = (image_header_t *)addr;
@@ -276,16 +281,18 @@
cnt -= SECTORSIZE;
} else {
puts ("\n** Bad Magic Number **\n");
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-39);
return 1;
}
+ SHOW_BOOT_PROGRESS (39);
if (doc_rw (doc_dev_desc + dev, 1, offset + SECTORSIZE, cnt,
NULL, (u_char *)(addr+SECTORSIZE))) {
printf ("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-40);
return 1;
}
+ SHOW_BOOT_PROGRESS (40);
/* Loading ok, update default load address */
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index e308474..c74cde9 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -185,6 +185,9 @@
static void output_data(int dev, ulong *sect_buf, int words);
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
+#ifndef CFG_ATA_PORT_ADDR
+#define CFG_ATA_PORT_ADDR(port) (port)
+#endif
#ifdef CONFIG_ATAPI
static void atapi_inquiry(block_dev_desc_t *dev_desc);
@@ -382,6 +385,7 @@
image_header_t *hdr;
int rcode = 0;
+ SHOW_BOOT_PROGRESS (41);
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
@@ -397,44 +401,50 @@
break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-42);
return 1;
}
+ SHOW_BOOT_PROGRESS (42);
if (!boot_device) {
puts ("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-43);
return 1;
}
+ SHOW_BOOT_PROGRESS (43);
dev = simple_strtoul(boot_device, &ep, 16);
if (ide_dev_desc[dev].type==DEV_TYPE_UNKNOWN) {
printf ("\n** Device %d not available\n", dev);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-44);
return 1;
}
+ SHOW_BOOT_PROGRESS (44);
if (*ep) {
if (*ep != ':') {
puts ("\n** Invalid boot device, use `dev[:part]' **\n");
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-45);
return 1;
}
part = simple_strtoul(++ep, NULL, 16);
}
+ SHOW_BOOT_PROGRESS (45);
if (get_partition_info (&ide_dev_desc[dev], part, &info)) {
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-46);
return 1;
}
+ SHOW_BOOT_PROGRESS (46);
if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) &&
(strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) {
printf ("\n** Invalid partition type \"%.32s\""
" (expect \"" BOOT_PART_TYPE "\")\n",
info.type);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-47);
return 1;
}
+ SHOW_BOOT_PROGRESS (47);
printf ("\nLoading from IDE device %d, partition %d: "
"Name: %.32s Type: %.32s\n",
@@ -445,26 +455,29 @@
if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) != 1) {
printf ("** Read error on %d:%d\n", dev, part);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-48);
return 1;
}
+ SHOW_BOOT_PROGRESS (48);
hdr = (image_header_t *)addr;
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
printf("\n** Bad Magic Number **\n");
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-49);
return 1;
}
+ SHOW_BOOT_PROGRESS (49);
checksum = ntohl(hdr->ih_hcrc);
hdr->ih_hcrc = 0;
if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) {
puts ("\n** Bad Header Checksum **\n");
- SHOW_BOOT_PROGRESS (-2);
+ SHOW_BOOT_PROGRESS (-50);
return 1;
}
+ SHOW_BOOT_PROGRESS (50);
hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */
print_image_hdr (hdr);
@@ -477,9 +490,10 @@
if (ide_dev_desc[dev].block_read (dev, info.start+1, cnt,
(ulong *)(addr+info.blksz)) != cnt) {
printf ("** Read error on %d:%d\n", dev, part);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-51);
return 1;
}
+ SHOW_BOOT_PROGRESS (51);
/* Loading ok, update default load address */
@@ -807,13 +821,13 @@
/* Ensure I/O operations complete */
EIEIO;
- *((uchar *)(ATA_CURR_BASE(dev)+port)) = val;
+ *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val;
}
#else /* ! __PPC__ */
static void __inline__
ide_outb(int dev, int port, unsigned char val)
{
- outb(val, ATA_CURR_BASE(dev)+port);
+ outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
}
#endif /* __PPC__ */
@@ -825,7 +839,7 @@
uchar val;
/* Ensure I/O operations complete */
EIEIO;
- val = *((uchar *)(ATA_CURR_BASE(dev)+port));
+ val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
dev, port, (ATA_CURR_BASE(dev)+port), val);
return (val);
@@ -834,7 +848,7 @@
static unsigned char __inline__
ide_inb(int dev, int port)
{
- return inb(ATA_CURR_BASE(dev)+port);
+ return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
}
#endif /* __PPC__ */
@@ -891,6 +905,9 @@
#ifdef __MIPS__
*dbuf++ = swab16p((u16*)pbuf);
*dbuf++ = swab16p((u16*)pbuf);
+#elif defined(CONFIG_PCS440EP)
+ *dbuf++ = *pbuf;
+ *dbuf++ = *pbuf;
#else
*dbuf++ = ld_le16(pbuf);
*dbuf++ = ld_le16(pbuf);
@@ -930,10 +947,18 @@
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (words--) {
+#if defined(CONFIG_PCS440EP)
+ /* not tested, because CF was write protected */
+ EIEIO;
+ *pbuf = ld_le16(dbuf++);
+ EIEIO;
+ *pbuf = ld_le16(dbuf++);
+#else
EIEIO;
*pbuf = *dbuf++;
EIEIO;
*pbuf = *dbuf++;
+#endif
}
#endif
}
@@ -981,10 +1006,17 @@
debug("in input data base for read is %lx\n", (unsigned long) pbuf);
while (words--) {
+#if defined(CONFIG_PCS440EP)
+ EIEIO;
+ *dbuf++ = ld_le16(pbuf);
+ EIEIO;
+ *dbuf++ = ld_le16(pbuf);
+#else
EIEIO;
*dbuf++ = *pbuf;
EIEIO;
*dbuf++ = *pbuf;
+#endif
}
#endif
}
diff --git a/common/cmd_log.c b/common/cmd_log.c
index 042a403..fba8bd8 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2007
* Detlev Zundel, DENX Software Engineering, dzu@denx.de.
*
* Code used from linux/kernel/printk.c
@@ -60,45 +60,40 @@
/* This combination will not print messages with the default loglevel */
static unsigned console_loglevel = 3;
static unsigned default_message_loglevel = 4;
-static unsigned char *log_buf = NULL;
-static unsigned long *ext_log_size;
-static unsigned long *ext_log_start;
-static unsigned long *ext_logged_chars;
-#define log_size (*ext_log_size)
-#define log_start (*ext_log_start)
-#define logged_chars (*ext_logged_chars)
+static unsigned log_version = 1;
+static logbuff_t *log;
-/* Forced by code, eh! */
-#define LOGBUFF_MAGIC 0xc0de4ced
-
-/* The mapping used here has to be the same as in setup_ext_logbuff ()
- in linux/kernel/printk */
void logbuff_init_ptrs (void)
{
- unsigned long *ext_tag;
- unsigned long post_word;
+ unsigned long tag, post_word;
char *s;
- log_buf = (unsigned char *)(gd->bd->bi_memsize-LOGBUFF_LEN);
- ext_tag = (unsigned long *)(log_buf)-4;
- ext_log_start = (unsigned long *)(log_buf)-3;
- ext_log_size = (unsigned long *)(log_buf)-2;
- ext_logged_chars = (unsigned long *)(log_buf)-1;
+ log = (logbuff_t *)(gd->bd->bi_memsize-LOGBUFF_LEN) - 1;
+
+ /* Set up log version */
+ if ((s = getenv ("logversion")) != NULL)
+ log_version = (int)simple_strtoul (s, NULL, 10);
+
+ if (log_version == 2)
+ tag = log->v2.tag;
+ else
+ tag = log->v1.tag;
post_word = post_word_load();
#ifdef CONFIG_POST
/* The post routines have setup the word so we can simply test it */
- if (post_word_load () & POST_COLDBOOT) {
- logged_chars = log_size = log_start = 0;
- *ext_tag = LOGBUFF_MAGIC;
- }
+ if (tag != LOGBUFF_MAGIC || (post_word & POST_COLDBOOT)) {
+ logbuff_reset ();
+ }
#else
/* No post routines, so we do our own checking */
- if (post_word != LOGBUFF_MAGIC) {
- logged_chars = log_size = log_start = 0;
+ if (tag != LOGBUFF_MAGIC || post_word != LOGBUFF_MAGIC) {
+ logbuff_reset ();
post_word_store (LOGBUFF_MAGIC);
- *ext_tag = LOGBUFF_MAGIC;
- }
+ }
#endif
+ if (log_version == 2 && (long)log->v2.start > (long)log->v2.con)
+ log->v2.start = log->v2.con;
+
/* Initialize default loglevel if present */
if ((s = getenv ("loglevel")) != NULL)
console_loglevel = (int)simple_strtoul (s, NULL, 10);
@@ -106,6 +101,15 @@
gd->post_log_word |= LOGBUFF_INITIALIZED;
}
+void logbuff_reset (void)
+{
+ memset (log, 0, sizeof (logbuff_t));
+ if (log_version == 2)
+ log->v2.tag = LOGBUFF_MAGIC;
+ else
+ log->v1.tag = LOGBUFF_MAGIC;
+}
+
int drv_logbuff_init (void)
{
device_t logdev;
@@ -162,7 +166,7 @@
int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *s;
- unsigned long i;
+ unsigned long i, start, size;
if (strcmp(argv[1],"append") == 0) {
/* Log concatenation of all arguments separated by spaces */
@@ -177,21 +181,34 @@
case 2:
if (strcmp(argv[1],"show") == 0) {
- for (i=0; i < (log_size&LOGBUFF_MASK); i++) {
- s = (char *)log_buf+((log_start+i)&LOGBUFF_MASK);
+ if (log_version == 2) {
+ start = log->v2.start;
+ size = log->v2.end - log->v2.start;
+ }
+ else {
+ start = log->v1.start;
+ size = log->v1.size;
+ }
+ for (i=0; i < (size&LOGBUFF_MASK); i++) {
+ s = (char *)log->buf+((start+i)&LOGBUFF_MASK);
putc (*s);
}
return 0;
} else if (strcmp(argv[1],"reset") == 0) {
- log_start = 0;
- log_size = 0;
- logged_chars = 0;
+ logbuff_reset ();
return 0;
} else if (strcmp(argv[1],"info") == 0) {
- printf ("Logbuffer at %08lx\n", (unsigned long)log_buf);
- printf ("log_start = %08lx\n", log_start);
- printf ("log_size = %08lx\n", log_size);
- printf ("logged_chars = %08lx\n", logged_chars);
+ printf ("Logbuffer at %08lx\n", (unsigned long)log->buf);
+ if (log_version == 2) {
+ printf ("log_start = %08lx\n", log->v2.start);
+ printf ("log_end = %08lx\n", log->v2.end);
+ printf ("logged_chars = %08lx\n", log->v2.chars);
+ }
+ else {
+ printf ("log_start = %08lx\n", log->v1.start);
+ printf ("log_size = %08lx\n", log->v1.size);
+ printf ("logged_chars = %08lx\n", log->v1.chars);
+ }
return 0;
}
printf ("Usage:\n%s\n", cmdtp->usage);
@@ -202,7 +219,7 @@
return 1;
}
}
-#if defined(CONFIG_LOGBUFFER)
+
U_BOOT_CMD(
log, 255, 1, do_log,
"log - manipulate logbuffer\n",
@@ -211,7 +228,7 @@
"log show - show contents\n"
"log append <msg> - append <msg> to the logbuffer\n"
);
-#endif /* CONFIG_LOGBUFFER */
+
static int logbuff_printk(const char *line)
{
int i;
@@ -241,13 +258,22 @@
}
line_feed = 0;
for (; p < buf_end; p++) {
- log_buf[(log_start+log_size) & LOGBUFF_MASK] = *p;
- if (log_size < LOGBUFF_LEN)
- log_size++;
- else
- log_start++;
-
- logged_chars++;
+ if (log_version == 2) {
+ log->buf[log->v2.end & LOGBUFF_MASK] = *p;
+ log->v2.end++;
+ if (log->v2.end - log->v2.start > LOGBUFF_LEN)
+ log->v2.start++;
+ log->v2.chars++;
+ }
+ else {
+ log->buf[(log->v1.start + log->v1.size) &
+ LOGBUFF_MASK] = *p;
+ if (log->v1.size < LOGBUFF_LEN)
+ log->v1.size++;
+ else
+ log->v1.start++;
+ log->v1.chars++;
+ }
if (*p == '\n') {
line_feed = 1;
break;
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index b011b5e..b088150 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -486,17 +486,19 @@
r = nand_read(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
- SHOW_BOOT_PROGRESS(-1);
+ SHOW_BOOT_PROGRESS(-56);
return 1;
}
+ SHOW_BOOT_PROGRESS(56);
hdr = (image_header_t *) addr;
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
- SHOW_BOOT_PROGRESS(-1);
+ SHOW_BOOT_PROGRESS(-57);
return 1;
}
+ SHOW_BOOT_PROGRESS(57);
print_image_hdr(hdr);
@@ -505,9 +507,10 @@
r = nand_read(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
- SHOW_BOOT_PROGRESS(-1);
+ SHOW_BOOT_PROGRESS(-58);
return 1;
}
+ SHOW_BOOT_PROGRESS(58);
/* Loading ok, update default load address */
@@ -559,6 +562,7 @@
}
#endif
+ SHOW_BOOT_PROGRESS(52);
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
@@ -582,23 +586,26 @@
usage:
#endif
printf("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS(-1);
+ SHOW_BOOT_PROGRESS(-53);
return 1;
}
+ SHOW_BOOT_PROGRESS(53);
if (!boot_device) {
puts("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS(-1);
+ SHOW_BOOT_PROGRESS(-54);
return 1;
}
+ SHOW_BOOT_PROGRESS(54);
idx = simple_strtoul(boot_device, NULL, 16);
if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) {
printf("\n** Device %d not available\n", idx);
- SHOW_BOOT_PROGRESS(-1);
+ SHOW_BOOT_PROGRESS(-55);
return 1;
}
+ SHOW_BOOT_PROGRESS(55);
return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]);
}
@@ -887,6 +894,7 @@
ulong offset = 0;
image_header_t *hdr;
int rcode = 0;
+ SHOW_BOOT_PROGRESS(52);
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
@@ -907,24 +915,27 @@
break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-53);
return 1;
}
+ SHOW_BOOT_PROGRESS(53);
if (!boot_device) {
puts ("\n** No boot device **\n");
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-54);
return 1;
}
+ SHOW_BOOT_PROGRESS(54);
dev = simple_strtoul(boot_device, &ep, 16);
if ((dev >= CFG_MAX_NAND_DEVICE) ||
(nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
printf ("\n** Device %d not available\n", dev);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-55);
return 1;
}
+ SHOW_BOOT_PROGRESS(55);
printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
@@ -933,9 +944,10 @@
if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset,
SECTORSIZE, NULL, (u_char *)addr)) {
printf ("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-56);
return 1;
}
+ SHOW_BOOT_PROGRESS(56);
hdr = (image_header_t *)addr;
@@ -947,17 +959,19 @@
cnt -= SECTORSIZE;
} else {
printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic));
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-57);
return 1;
}
+ SHOW_BOOT_PROGRESS(57);
if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ,
offset + SECTORSIZE, cnt, NULL,
(u_char *)(addr+SECTORSIZE))) {
printf ("** Read error on %d\n", dev);
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-58);
return 1;
}
+ SHOW_BOOT_PROGRESS(58);
/* Loading ok, update default load address */
diff --git a/common/cmd_net.c b/common/cmd_net.c
index 2cb2c5d..e9d552e 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -30,6 +30,13 @@
#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+extern void show_boot_progress (int val);
+# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
@@ -184,18 +191,25 @@
break;
default: printf ("Usage:\n%s\n", cmdtp->usage);
+ SHOW_BOOT_PROGRESS(-80);
return 1;
}
- if ((size = NetLoop(proto)) < 0)
+ SHOW_BOOT_PROGRESS(80);
+ if ((size = NetLoop(proto)) < 0) {
+ SHOW_BOOT_PROGRESS(-81);
return 1;
+ }
+ SHOW_BOOT_PROGRESS(81);
/* NetLoop ok, update environment */
netboot_update_env();
/* done if no file was loaded (no errors though) */
- if (size == 0)
+ if (size == 0) {
+ SHOW_BOOT_PROGRESS(-82);
return 0;
+ }
/* flush cache */
flush_cache(load_addr, size);
@@ -208,15 +222,23 @@
printf ("Automatic boot of image at addr 0x%08lX ...\n",
load_addr);
+ SHOW_BOOT_PROGRESS(82);
rcode = do_bootm (cmdtp, 0, 1, local_args);
}
#ifdef CONFIG_AUTOSCRIPT
if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
printf("Running autoscript at addr 0x%08lX ...\n", load_addr);
+ SHOW_BOOT_PROGRESS(83);
rcode = autoscript (load_addr);
}
#endif
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+ if (rcode < 0)
+ SHOW_BOOT_PROGRESS(-83);
+ else
+ SHOW_BOOT_PROGRESS(84);
+#endif
return rcode;
}
diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c
index 09c86e6..d83c31a 100644
--- a/common/cmd_reiser.c
+++ b/common/cmd_reiser.c
@@ -90,7 +90,7 @@
}
if (!reiserfs_mount(part_length)) {
- printf ("** Bad Reisefs partition or disk - %s %d:%d **\n", argv[1], dev, part);
+ printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
@@ -183,7 +183,7 @@
return 1;
}
- if (strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
+ if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
printf ("\n** Invalid partition type \"%.32s\""
" (expect \"" BOOT_PART_TYPE "\")\n",
info.type);
@@ -204,7 +204,7 @@
}
if (!reiserfs_mount(part_length)) {
- printf ("** Bad Reisefs partition or disk - %s %d:%d **\n", argv[1], dev, part);
+ printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
diff --git a/common/cmd_sata.c b/common/cmd_sata.c
new file mode 100644
index 0000000..bd4c11f
--- /dev/null
+++ b/common/cmd_sata.c
@@ -0,0 +1,712 @@
+/*
+ * Copyright (C) Procsys. All rights reserved.
+ * Author: Mushtaq Khan <mushtaq_k@procsys.com>
+ * <mushtaqk_921@yahoo.co.in>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * with the reference to libata in kernel 2.4.32
+ *
+ */
+
+/*
+ * File contains SATA read-write and other utility functions.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <command.h>
+#include <config.h>
+#include <ide.h>
+#include <ata.h>
+
+#ifdef CFG_SATA_SUPPORTED
+/*For debug prints set macro DEBUG_SATA to 1 */
+#define DEBUG_SATA 0
+/*Macro for SATA library specific declarations */
+#define SATA_DECL
+#include <sata.h>
+#undef SATA_DECL
+
+static u8 __inline__
+sata_inb (unsigned long ioaddr)
+{
+ return inb (ioaddr);
+}
+
+static void __inline__
+sata_outb (unsigned char val, unsigned long ioaddr)
+{
+ outb (val, ioaddr);
+}
+
+static void
+output_data (struct sata_ioports *ioaddr, ulong * sect_buf, int words)
+{
+ outsw (ioaddr->data_addr, sect_buf, words << 1);
+}
+
+static int
+input_data (struct sata_ioports *ioaddr, ulong * sect_buf, int words)
+{
+ insw (ioaddr->data_addr, sect_buf, words << 1);
+ return 0;
+}
+
+static void
+sata_cpy (unsigned char *dst, unsigned char *src, unsigned int len)
+{
+ unsigned char *end, *last;
+
+ last = dst;
+ end = src + len - 1;
+
+ /* reserve space for '\0' */
+ if (len < 2)
+ goto OUT;
+
+ /* skip leading white space */
+ while ((*src) && (src < end) && (*src == ' '))
+ ++src;
+
+ /* copy string, omitting trailing white space */
+ while ((*src) && (src < end)) {
+ *dst++ = *src;
+ if (*src++ != ' ')
+ last = dst;
+ }
+ OUT:
+ *last = '\0';
+}
+
+int
+sata_bus_softreset (int num)
+{
+ u8 dev = 0, status = 0, i;
+
+ port[num].dev_mask = 0;
+
+ for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) {
+ if (!(sata_devchk (&port[num].ioaddr, i))) {
+ PRINTF ("dev_chk failed for dev#%d\n", i);
+ } else {
+ port[num].dev_mask |= (1 << i);
+ PRINTF ("dev_chk passed for dev#%d\n", i);
+ }
+ }
+
+ if (!(port[num].dev_mask)) {
+ printf ("no devices on port%d\n", num);
+ return 1;
+ }
+
+ dev_select (&port[num].ioaddr, dev);
+
+ port[num].ctl_reg = 0x08; /*Default value of control reg */
+ sata_outb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
+ udelay (10);
+ sata_outb (port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr);
+ udelay (10);
+ sata_outb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
+
+ /* spec mandates ">= 2ms" before checking status.
+ * We wait 150ms, because that was the magic delay used for
+ * ATAPI devices in Hale Landis's ATADRVR, for the period of time
+ * between when the ATA command register is written, and then
+ * status is checked. Because waiting for "a while" before
+ * checking status is fine, post SRST, we perform this magic
+ * delay here as well.
+ */
+ msleep (150);
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 300);
+ while ((status & ATA_BUSY)) {
+ msleep (100);
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 3);
+ }
+
+ if (status & ATA_BUSY)
+ printf ("ata%u is slow to respond,plz be patient\n", port);
+
+ while ((status & ATA_BUSY)) {
+ msleep (100);
+ status = sata_chk_status (&port[num].ioaddr);
+ }
+
+ if (status & ATA_BUSY) {
+ printf ("ata%u failed to respond : ", port);
+ printf ("bus reset failed\n");
+ return 1;
+ }
+ return 0;
+}
+
+void
+sata_identify (int num, int dev)
+{
+ u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev;
+ u16 iobuf[ATA_SECT_SIZE];
+ u64 n_sectors = 0;
+ u8 mask = 0;
+
+ memset (iobuf, 0, sizeof (iobuf));
+ hd_driveid_t *iop = (hd_driveid_t *) iobuf;
+
+ if (dev == 0)
+ mask = 0x01;
+ else
+ mask = 0x02;
+
+ if (!(port[num].dev_mask & mask)) {
+ printf ("dev%d is not present on port#%d\n", dev, num);
+ return;
+ }
+
+ printf ("port=%d dev=%d\n", num, dev);
+
+ dev_select (&port[num].ioaddr, dev);
+
+ status = 0;
+ cmd = ATA_CMD_IDENT; /*Device Identify Command */
+ sata_outb (cmd, port[num].ioaddr.command_addr);
+ sata_inb (port[num].ioaddr.altstatus_addr);
+ udelay (10);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000);
+ if (status & ATA_ERR) {
+ printf ("\ndevice not responding\n");
+ port[num].dev_mask &= ~mask;
+ return;
+ }
+
+ input_data (&port[num].ioaddr, (ulong *) iobuf, ATA_SECTORWORDS);
+
+ PRINTF ("\nata%u: dev %u cfg 49:%04x 82:%04x 83:%04x 84:%04x85:%04x"
+ "86:%04x" "87:%04x 88:%04x\n", num, dev, iobuf[49],
+ iobuf[82], iobuf[83], iobuf[84], iobuf[85], iobuf[86],
+ iobuf[87], iobuf[88]);
+
+ /* we require LBA and DMA support (bits 8 & 9 of word 49) */
+ if (!ata_id_has_dma (iobuf) || !ata_id_has_lba (iobuf)) {
+ PRINTF ("ata%u: no dma/lba\n", num);
+ }
+ ata_dump_id (iobuf);
+
+ if (ata_id_has_lba48 (iobuf)) {
+ n_sectors = ata_id_u64 (iobuf, 100);
+ } else {
+ n_sectors = ata_id_u32 (iobuf, 60);
+ }
+ PRINTF ("no. of sectors %u\n", ata_id_u64 (iobuf, 100));
+ PRINTF ("no. of sectors %u\n", ata_id_u32 (iobuf, 60));
+
+ if (n_sectors == 0) {
+ port[num].dev_mask &= ~mask;
+ return;
+ }
+
+ sata_cpy (sata_dev_desc[devno].revision, iop->fw_rev,
+ sizeof (sata_dev_desc[devno].revision));
+ sata_cpy (sata_dev_desc[devno].vendor, iop->model,
+ sizeof (sata_dev_desc[devno].vendor));
+ sata_cpy (sata_dev_desc[devno].product, iop->serial_no,
+ sizeof (sata_dev_desc[devno].product));
+ strswab (sata_dev_desc[devno].revision);
+ strswab (sata_dev_desc[devno].vendor);
+
+ if ((iop->config & 0x0080) == 0x0080) {
+ sata_dev_desc[devno].removable = 1;
+ } else {
+ sata_dev_desc[devno].removable = 0;
+ }
+
+ sata_dev_desc[devno].lba = iop->lba_capacity;
+ PRINTF ("lba=0x%x", sata_dev_desc[devno].lba);
+
+#ifdef CONFIG_LBA48
+ if (iop->command_set_2 & 0x0400) {
+ sata_dev_desc[devno].lba48 = 1;
+ lba = (unsigned long long) iop->lba48_capacity[0] |
+ ((unsigned long long) iop->lba48_capacity[1] << 16) |
+ ((unsigned long long) iop->lba48_capacity[2] << 32) |
+ ((unsigned long long) iop->lba48_capacity[3] << 48);
+ } else {
+ sata_dev_desc[devno].lba48 = 0;
+ }
+#endif
+
+ /* assuming HD */
+ sata_dev_desc[devno].type = DEV_TYPE_HARDDISK;
+ sata_dev_desc[devno].blksz = ATA_BLOCKSIZE;
+ sata_dev_desc[devno].lun = 0; /* just to fill something in... */
+}
+
+void
+set_Feature_cmd (int num, int dev)
+{
+ u8 mask = 0x00, status = 0;
+
+ if (dev == 0)
+ mask = 0x01;
+ else
+ mask = 0x02;
+
+ if (!(port[num].dev_mask & mask)) {
+ PRINTF ("dev%d is not present on port#%d\n", dev, num);
+ return;
+ }
+
+ dev_select (&port[num].ioaddr, dev);
+
+ sata_outb (SETFEATURES_XFER, port[num].ioaddr.feature_addr);
+ sata_outb (XFER_PIO_4, port[num].ioaddr.nsect_addr);
+ sata_outb (0, port[num].ioaddr.lbal_addr);
+ sata_outb (0, port[num].ioaddr.lbam_addr);
+ sata_outb (0, port[num].ioaddr.lbah_addr);
+
+ sata_outb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
+ sata_outb (ATA_CMD_SETF, port[num].ioaddr.command_addr);
+
+ udelay (50);
+ msleep (150);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000);
+ if ((status & (ATA_STAT_BUSY | ATA_STAT_ERR))) {
+ printf ("Error : status 0x%02x\n", status);
+ port[num].dev_mask &= ~mask;
+ }
+}
+
+void
+sata_port (struct sata_ioports *ioport)
+{
+ ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA;
+ ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR;
+ ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE;
+ ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT;
+ ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL;
+ ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM;
+ ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH;
+ ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE;
+ ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS;
+ ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD;
+}
+
+int
+sata_devchk (struct sata_ioports *ioaddr, int dev)
+{
+ u8 nsect, lbal;
+
+ dev_select (ioaddr, dev);
+
+ sata_outb (0x55, ioaddr->nsect_addr);
+ sata_outb (0xaa, ioaddr->lbal_addr);
+
+ sata_outb (0xaa, ioaddr->nsect_addr);
+ sata_outb (0x55, ioaddr->lbal_addr);
+
+ sata_outb (0x55, ioaddr->nsect_addr);
+ sata_outb (0xaa, ioaddr->lbal_addr);
+
+ nsect = sata_inb (ioaddr->nsect_addr);
+ lbal = sata_inb (ioaddr->lbal_addr);
+
+ if ((nsect == 0x55) && (lbal == 0xaa))
+ return 1; /* we found a device */
+ else
+ return 0; /* nothing found */
+}
+
+void
+dev_select (struct sata_ioports *ioaddr, int dev)
+{
+ u8 tmp = 0;
+
+ if (dev == 0)
+ tmp = ATA_DEVICE_OBS;
+ else
+ tmp = ATA_DEVICE_OBS | ATA_DEV1;
+
+ sata_outb (tmp, ioaddr->device_addr);
+ sata_inb (ioaddr->altstatus_addr);
+ udelay (5);
+}
+
+u8
+sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max)
+{
+ u8 status;
+
+ do {
+ udelay (1000);
+ status = sata_chk_status (ioaddr);
+ max--;
+ } while ((status & bits) && (max > 0));
+
+ return status;
+}
+
+u8
+sata_chk_status (struct sata_ioports * ioaddr)
+{
+ return sata_inb (ioaddr->status_addr);
+}
+
+void
+msleep (int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ udelay (1000);
+}
+
+ulong
+sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff)
+{
+ ulong n = 0, *buffer = (ulong *)buff;
+ u8 dev = 0, num = 0, mask = 0, status = 0;
+
+#ifdef CONFIG_LBA48
+ unsigned char lba48 = 0;
+
+ if (blknr & 0x0000fffff0000000) {
+ if (!sata_dev_desc[devno].lba48) {
+ printf ("Drive doesn't support 48-bit addressing\n");
+ return 0;
+ }
+ /* more than 28 bits used, use 48bit mode */
+ lba48 = 1;
+ }
+#endif
+ /*Port Number */
+ num = device / CFG_SATA_DEVS_PER_BUS;
+ /*dev on the port */
+ if (device >= CFG_SATA_DEVS_PER_BUS)
+ dev = device - CFG_SATA_DEVS_PER_BUS;
+ else
+ dev = device;
+
+ if (dev == 0)
+ mask = 0x01;
+ else
+ mask = 0x02;
+
+ if (!(port[num].dev_mask & mask)) {
+ printf ("dev%d is not present on port#%d\n", dev, num);
+ return 0;
+ }
+
+ /* Select device */
+ dev_select (&port[num].ioaddr, dev);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500);
+ if (status & ATA_BUSY) {
+ printf ("ata%u failed to respond\n", port[num].port_no);
+ return n;
+ }
+ while (blkcnt-- > 0) {
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500);
+ if (status & ATA_BUSY) {
+ printf ("ata%u failed to respond\n", 0);
+ return n;
+ }
+#ifdef CONFIG_LBA48
+ if (lba48) {
+ /* write high bits */
+ sata_outb (0, port[num].ioaddr.nsect_addr);
+ sata_outb ((blknr >> 24) & 0xFF,
+ port[num].ioaddr.lbal_addr);
+ sata_outb ((blknr >> 32) & 0xFF,
+ port[num].ioaddr.lbam_addr);
+ sata_outb ((blknr >> 40) & 0xFF,
+ port[num].ioaddr.lbah_addr);
+ }
+#endif
+ sata_outb (1, port[num].ioaddr.nsect_addr);
+ sata_outb (((blknr) >> 0) & 0xFF,
+ port[num].ioaddr.lbal_addr);
+ sata_outb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
+ sata_outb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
+
+#ifdef CONFIG_LBA48
+ if (lba48) {
+ sata_outb (ATA_LBA, port[num].ioaddr.device_addr);
+ sata_outb (ATA_CMD_READ_EXT,
+ port[num].ioaddr.command_addr);
+ } else
+#endif
+ {
+ sata_outb (ATA_LBA | ((blknr >> 24) & 0xF),
+ port[num].ioaddr.device_addr);
+ sata_outb (ATA_CMD_READ,
+ port[num].ioaddr.command_addr);
+ }
+
+ msleep (50);
+ /*may take up to 4 sec */
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000);
+
+ if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR))
+ != ATA_STAT_DRQ) {
+ u8 err = 0;
+
+ printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
+ device, (ulong) blknr, status);
+ err = sata_inb (port[num].ioaddr.error_addr);
+ printf ("Error reg = 0x%x\n", err);
+ return (n);
+ }
+ input_data (&port[num].ioaddr, buffer, ATA_SECTORWORDS);
+ sata_inb (port[num].ioaddr.altstatus_addr);
+ udelay (50);
+
+ ++n;
+ ++blknr;
+ buffer += ATA_SECTORWORDS;
+ }
+ return n;
+}
+
+ulong
+sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
+{
+ ulong n = 0, *buffer = (ulong *)buff;
+ unsigned char status = 0, num = 0, dev = 0, mask = 0;
+
+#ifdef CONFIG_LBA48
+ unsigned char lba48 = 0;
+
+ if (blknr & 0x0000fffff0000000) {
+ if (!sata_dev_desc[devno].lba48) {
+ printf ("Drive doesn't support 48-bit addressing\n");
+ return 0;
+ }
+ /* more than 28 bits used, use 48bit mode */
+ lba48 = 1;
+ }
+#endif
+ /*Port Number */
+ num = device / CFG_SATA_DEVS_PER_BUS;
+ /*dev on the Port */
+ if (device >= CFG_SATA_DEVS_PER_BUS)
+ dev = device - CFG_SATA_DEVS_PER_BUS;
+ else
+ dev = device;
+
+ if (dev == 0)
+ mask = 0x01;
+ else
+ mask = 0x02;
+
+ /* Select device */
+ dev_select (&port[num].ioaddr, dev);
+
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500);
+ if (status & ATA_BUSY) {
+ printf ("ata%u failed to respond\n", port[num].port_no);
+ return n;
+ }
+
+ while (blkcnt-- > 0) {
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500);
+ if (status & ATA_BUSY) {
+ printf ("ata%u failed to respond\n",
+ port[num].port_no);
+ return n;
+ }
+#ifdef CONFIG_LBA48
+ if (lba48) {
+ /* write high bits */
+ sata_outb (0, port[num].ioaddr.nsect_addr);
+ sata_outb ((blknr >> 24) & 0xFF,
+ port[num].ioaddr.lbal_addr);
+ sata_outb ((blknr >> 32) & 0xFF,
+ port[num].ioaddr.lbam_addr);
+ sata_outb ((blknr >> 40) & 0xFF,
+ port[num].ioaddr.lbah_addr);
+ }
+#endif
+ sata_outb (1, port[num].ioaddr.nsect_addr);
+ sata_outb ((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr);
+ sata_outb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
+ sata_outb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
+#ifdef CONFIG_LBA48
+ if (lba48) {
+ sata_outb (ATA_LBA, port[num].ioaddr.device_addr);
+ sata_outb (ATA_CMD_WRITE_EXT,
+ port[num].ioaddr.command_addr);
+ } else
+#endif
+ {
+ sata_outb (ATA_LBA | ((blknr >> 24) & 0xF),
+ port[num].ioaddr.device_addr);
+ sata_outb (ATA_CMD_WRITE,
+ port[num].ioaddr.command_addr);
+ }
+
+ msleep (50);
+ /*may take up to 4 sec */
+ status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000);
+ if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR))
+ != ATA_STAT_DRQ) {
+ printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
+ device, (ulong) blknr, status);
+ return (n);
+ }
+
+ output_data (&port[num].ioaddr, buffer, ATA_SECTORWORDS);
+ sata_inb (port[num].ioaddr.altstatus_addr);
+ udelay (50);
+
+ ++n;
+ ++blknr;
+ buffer += ATA_SECTORWORDS;
+ }
+ return n;
+}
+
+block_dev_desc_t *sata_get_dev (int dev);
+
+block_dev_desc_t *
+sata_get_dev (int dev)
+{
+ return ((block_dev_desc_t *) & sata_dev_desc[dev]);
+}
+
+int
+do_sata (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+
+ switch (argc) {
+ case 0:
+ case 1:
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 2:
+ if (strncmp (argv[1], "init", 4) == 0) {
+ int rcode = 0;
+
+ rcode = init_sata ();
+ if (rcode)
+ printf ("Sata initialization Failed\n");
+ return rcode;
+ } else if (strncmp (argv[1], "inf", 3) == 0) {
+ int i;
+
+ putc ('\n');
+ for (i = 0; i < CFG_SATA_MAXDEVICES; ++i) {
+ /*List only known devices */
+ if (sata_dev_desc[i].type ==
+ DEV_TYPE_UNKNOWN)
+ continue;
+ printf ("sata dev %d: ", i);
+ dev_print (&sata_dev_desc[i]);
+ }
+ return 0;
+ }
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ case 3:
+ if (strcmp (argv[1], "dev") == 0) {
+ int dev = (int) simple_strtoul (argv[2], NULL, 10);
+
+ if (dev >= CFG_SATA_MAXDEVICES) {
+ printf ("\nSata dev %d not available\n",
+ dev);
+ return 1;
+ }
+ printf ("\nSATA dev %d: ", dev);
+ dev_print (&sata_dev_desc[dev]);
+ if (sata_dev_desc[dev].type == DEV_TYPE_UNKNOWN)
+ return 1;
+ curr_dev = dev;
+ return 0;
+ } else if (strcmp (argv[1], "part") == 0) {
+ int dev = (int) simple_strtoul (argv[2], NULL, 10);
+
+ if (dev >= CFG_SATA_MAXDEVICES) {
+ printf ("\nSata dev %d not available\n",
+ dev);
+ return 1;
+ }
+ PRINTF ("\nSATA dev %d: ", dev);
+ if (sata_dev_desc[dev].part_type !=
+ PART_TYPE_UNKNOWN) {
+ print_part (&sata_dev_desc[dev]);
+ } else {
+ printf ("\nSata dev %d partition type "
+ "unknown\n", dev);
+ return 1;
+ }
+ return 0;
+ }
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ default:
+ if (argc < 5) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+ if (strcmp (argv[1], "read") == 0) {
+ ulong addr = simple_strtoul (argv[2], NULL, 16);
+ ulong cnt = simple_strtoul (argv[4], NULL, 16);
+ ulong n;
+ lbaint_t blk = simple_strtoul (argv[3], NULL, 16);
+
+ memset ((int *) addr, 0, cnt * 512);
+ printf ("\nSATA read: dev %d blk # %ld,"
+ "count %ld ... ", curr_dev, blk, cnt);
+ n = sata_read (curr_dev, blk, cnt, (ulong *) addr);
+ /* flush cache after read */
+ flush_cache (addr, cnt * 512);
+ printf ("%ld blocks read: %s\n", n,
+ (n == cnt) ? "OK" : "ERR");
+ if (n == cnt)
+ return 1;
+ else
+ return 0;
+ } else if (strcmp (argv[1], "write") == 0) {
+ ulong addr = simple_strtoul (argv[2], NULL, 16);
+ ulong cnt = simple_strtoul (argv[4], NULL, 16);
+ ulong n;
+ lbaint_t blk = simple_strtoul (argv[3], NULL, 16);
+
+ printf ("\nSata write: dev %d blk # %ld,"
+ "count %ld ... ", curr_dev, blk, cnt);
+ n = sata_write (curr_dev, blk, cnt, (ulong *) addr);
+ printf ("%ld blocks written: %s\n", n,
+ (n == cnt) ? "OK" : "ERR");
+ if (n == cnt)
+ return 1;
+ else
+ return 0;
+ } else {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+ } /*End OF SWITCH */
+}
+
+U_BOOT_CMD (sata, 5, 1, do_sata,
+ "sata init\n"
+ "sata info\n"
+ "sata part device\n"
+ "sata dev device\n"
+ "sata read addr blk# cnt\n"
+ "sata write addr blk# cnt\n", "cmd for init,rw and dev-info\n");
+
+#endif
diff --git a/common/env_common.c b/common/env_common.c
index eb33422..0462cad6 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -232,7 +232,7 @@
puts ("Using default environment\n\n");
#else
puts ("*** Warning - bad CRC, using default environment\n\n");
- SHOW_BOOT_PROGRESS (-1);
+ SHOW_BOOT_PROGRESS (-60);
#endif
if (sizeof(default_environment) > ENV_SIZE)
diff --git a/common/main.c b/common/main.c
index 553ac35..a00ebc1 100644
--- a/common/main.c
+++ b/common/main.c
@@ -113,7 +113,7 @@
u_int i;
# ifdef CONFIG_AUTOBOOT_PROMPT
- printf (CONFIG_AUTOBOOT_PROMPT, bootdelay);
+ printf(CONFIG_AUTOBOOT_PROMPT, bootdelay);
# endif
# ifdef CONFIG_AUTOBOOT_DELAY_STR
@@ -187,7 +187,7 @@
}
# if DEBUG_BOOTKEYS
if (!abort)
- puts ("key timeout\n");
+ puts("key timeout\n");
# endif
#ifdef CONFIG_SILENT_CONSOLE
@@ -244,13 +244,13 @@
# endif
break;
}
- udelay (10000);
+ udelay(10000);
}
- printf ("\b\b\b%2d ", bootdelay);
+ printf("\b\b\b%2d ", bootdelay);
}
- putc ('\n');
+ putc('\n');
#ifdef CONFIG_SILENT_CONSOLE
if (abort)
@@ -962,7 +962,7 @@
n = 0;
continue;
- case 0x17: /* ^W - erase word */
+ case 0x17: /* ^W - erase word */
p=delete_char(console_buffer, p, &col, &n, plen);
while ((n > 0) && (*p != ' ')) {
p=delete_char(console_buffer, p, &col, &n, plen);
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
index 1143038..b5834b9 100644
--- a/cpu/74xx_7xx/start.S
+++ b/cpu/74xx_7xx/start.S
@@ -125,7 +125,7 @@
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -143,7 +143,7 @@
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/i386/start.S b/cpu/i386/start.S
index afcbb24..1a54dd1 100644
--- a/cpu/i386/start.S
+++ b/cpu/i386/start.S
@@ -149,7 +149,7 @@
.progress3:
/* clear bss section in ram, size must be 4-byte aligned */
- movl $_i386boot_bss_start, %eax /* BSS start */
+ movl $_i386boot_bss_start, %edi /* MK_CHG BSS start */
movl $_i386boot_bss_size, %ecx /* BSS size */
movl %ecx, %eax
andl $3, %eax
diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S
index 087435e..0637003 100644
--- a/cpu/mpc5xx/start.S
+++ b/cpu/mpc5xx/start.S
@@ -155,7 +155,7 @@
/* Initialize some SPRs that are hard to access from C */
/*----------------------------------------------------------------------*/
- lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */
+ lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */
lis r2, CFG_INIT_SP_ADDR@h
ori r1, r2, CFG_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */
/* Note: R0 is still 0 here */
@@ -210,7 +210,7 @@
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -228,7 +228,7 @@
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index 3936b55..9b1bd48 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -208,7 +208,7 @@
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -227,7 +227,7 @@
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/mpc8220/start.S b/cpu/mpc8220/start.S
index 5233202..b5145ca 100644
--- a/cpu/mpc8220/start.S
+++ b/cpu/mpc8220/start.S
@@ -169,7 +169,7 @@
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -188,7 +188,7 @@
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/mpc824x/start.S b/cpu/mpc824x/start.S
index 9ff052c..784edc3 100644
--- a/cpu/mpc824x/start.S
+++ b/cpu/mpc824x/start.S
@@ -220,7 +220,7 @@
/* Alignment exception. */
. = EXC_OFF_ALIGN
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -238,7 +238,7 @@
/* Program check exception */
. = EXC_OFF_PROGRAM
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S
index 2e93bbb..7f5dc81 100644
--- a/cpu/mpc8260/start.S
+++ b/cpu/mpc8260/start.S
@@ -279,7 +279,7 @@
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -298,7 +298,7 @@
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
@@ -676,13 +676,13 @@
bdnz 1b
/* Load the Instruction Address Breakpoint Register (IABR). */
- /* */
+ /* */
/* The address to load is stored in the first word of dual port */
/* ram and should be preserved while the power is on, so you */
/* can plug addresses into that location then reset the cpu and */
/* this code will load that address into the IABR after the */
/* reset. */
- /* */
+ /* */
/* When the program counter matches the contents of the IABR, */
/* an exception is generated (before the instruction at that */
/* location completes). The vector for this exception is 0x1300 */
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index e078f27..841fe82 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -415,7 +415,7 @@
"clock-frequency",
fdt_set_busfreq
},
-#ifdef CONFIG_MPC83XX_TSEC1
+#ifdef CONFIG_TSEC1
{ "/" OF_SOC "/ethernet@24000,
"mac-address",
fdt_set_eth0
@@ -425,7 +425,7 @@
fdt_set_eth0
},
#endif
-#ifdef CONFIG_MPC83XX_TSEC2
+#ifdef CONFIG_TSEC2
{ "/" OF_SOC "/ethernet@25000,
"mac-address",
fdt_set_eth1
@@ -525,7 +525,7 @@
if (p != NULL)
*p = cpu_to_be32(clock);
-#ifdef CONFIG_MPC83XX_TSEC1
+#ifdef CONFIG_TSEC1
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
if (p != NULL)
memcpy(p, bd->bi_enetaddr, 6);
@@ -535,7 +535,7 @@
memcpy(p, bd->bi_enetaddr, 6);
#endif
-#ifdef CONFIG_MPC83XX_TSEC2
+#ifdef CONFIG_TSEC2
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
if (p != NULL)
memcpy(p, bd->bi_enet1addr, 6);
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 6ee9ec9..496c8a5 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -263,7 +263,7 @@
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -282,7 +282,7 @@
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 7735a52..1d791c9 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -280,7 +280,7 @@
if (p != NULL)
*p = cpu_to_be32(clock);
-#if defined(CONFIG_MPC85XX_TSEC1)
+#if defined(CONFIG_TSEC1)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
if (p)
memcpy(p, bd->bi_enetaddr, 6);
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 20c7ebc..77c155c 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -457,7 +457,7 @@
/* Alignment exception. */
. = 0x0600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -475,7 +475,7 @@
/* Program check exception */
. = 0x0700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index a33acfe..9456471 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -278,7 +278,7 @@
if (p != NULL)
*p = cpu_to_be32(clock);
-#if defined(CONFIG_MPC86XX_TSEC1)
+#if defined(CONFIG_TSEC1)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
if (p != NULL)
memcpy(p, bd->bi_enetaddr, 6);
@@ -287,7 +287,7 @@
memcpy(p, bd->bi_enetaddr, 6);
#endif
-#if defined(CONFIG_MPC86XX_TSEC2)
+#if defined(CONFIG_TSEC2)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
if (p != NULL)
memcpy(p, bd->bi_enet1addr, 6);
@@ -296,7 +296,7 @@
memcpy(p, bd->bi_enet1addr, 6);
#endif
-#if defined(CONFIG_MPC86XX_TSEC3)
+#if defined(CONFIG_TSEC3)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
if (p != NULL)
memcpy(p, bd->bi_enet2addr, 6);
@@ -305,7 +305,7 @@
memcpy(p, bd->bi_enet2addr, 6);
#endif
-#if defined(CONFIG_MPC86XX_TSEC4)
+#if defined(CONFIG_TSEC4)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
if (p != NULL)
memcpy(p, bd->bi_enet3addr, 6);
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 67c56db..412745b 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -116,7 +116,7 @@
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -134,7 +134,7 @@
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S
index 33a3f6c..eca4b50 100644
--- a/cpu/mpc8xx/start.S
+++ b/cpu/mpc8xx/start.S
@@ -224,7 +224,7 @@
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
@@ -242,7 +242,7 @@
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 8bf03e1..2837929 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -77,11 +77,21 @@
#include <asm/processor.h>
#include <pci.h>
+#ifdef CONFIG_PCI
+
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+/*
+ * Board-specific pci initialization
+ * Platform code can reimplement pci_pre_init() if needed
+ */
+int __pci_pre_init(struct pci_controller *hose)
+{
+ return 1;
+}
+int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init")));
-#ifdef CONFIG_PCI
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
#if defined(CONFIG_PMC405)
ushort pmc405_pci_subsys_deviceid(void);
@@ -191,6 +201,13 @@
if (hose->pci_fb)
pciauto_region_init(hose->pci_fb);
+ /* Let board change/modify hose & do initial checks */
+ if (pci_pre_init (hose) == 0) {
+ printf("PCI: Board-specific initialization failed.\n");
+ printf("PCI: Configuration aborted.\n");
+ return;
+ }
+
pci_register_hose(hose);
/*--------------------------------------------------------------------------+
@@ -416,14 +433,12 @@
#endif
-#endif /* CONFIG_PCI */
-
#endif /* CONFIG_405GP */
/*-----------------------------------------------------------------------------+
* CONFIG_440
*-----------------------------------------------------------------------------*/
-#if defined(CONFIG_440) && defined(CONFIG_PCI)
+#if defined(CONFIG_440)
static struct pci_controller ppc440_hose = {0};
@@ -496,14 +511,12 @@
pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA);
-#if defined(CFG_PCI_PRE_INIT)
/* Let board change/modify hose & do initial checks */
if (pci_pre_init (hose) == 0) {
printf("PCI: Board-specific initialization failed.\n");
printf("PCI: Configuration aborted.\n");
return;
}
-#endif
pci_register_hose( hose );
@@ -575,4 +588,5 @@
#endif
}
-#endif /* CONFIG_440 & CONFIG_PCI */
+#endif /* CONFIG_440 */
+#endif /* CONFIG_PCI */
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index c500d3f..8c18d0f 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -70,6 +70,15 @@
#define ONE_BILLION 1000000000
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+ hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
/*-----------------------------------------------------------------------------
| Memory Controller Options 0
+-----------------------------------------------------------------------------*/
@@ -262,7 +271,7 @@
#ifdef CFG_SIMULATE_SPD_EEPROM
extern unsigned char cfg_simulate_spd_eeprom[128];
#endif
-void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value);
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
static unsigned char spd_read(uchar chip, uint addr);
static void get_spd_info(unsigned long *dimm_populated,
@@ -373,7 +382,7 @@
#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
/* and program tlb entries for this size (dynamic) */
- program_tlb(0, total_size, MY_TLB_WORD2_I_ENABLE);
+ program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
#endif
/*
@@ -467,7 +476,7 @@
if (dimm_found == FALSE) {
printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
}
@@ -490,7 +499,7 @@
dimm_num);
printf("Only DDR SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
}
}
@@ -510,7 +519,7 @@
if (voltage_type != 0x04) {
printf("ERROR: DIMM %lu with unsupported voltage level.\n",
dimm_num);
- hang();
+ spd_ddr_init_hang ();
} else {
debug("DIMM %lu voltage level supported.\n", dimm_num);
}
@@ -581,7 +590,7 @@
printf("WARNING: DIMM with datawidth of %lu bits.\n",
data_width);
printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
- hang();
+ spd_ddr_init_hang ();
}
break;
}
@@ -769,7 +778,7 @@
if ((tcyc_reg & 0x0F) >= 10) {
printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
dimm_num);
- hang();
+ spd_ddr_init_hang ();
}
cycle_time_ns_x_10[cas_index] =
@@ -849,7 +858,7 @@
printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
printf("Make sure the PLB speed is within the supported range.\n");
- hang();
+ spd_ddr_init_hang ();
}
/*
@@ -1008,6 +1017,7 @@
*/
for (i = 0; i < NUMMEMTESTS; i++) {
for (j = 0; j < NUMMEMWORDS; j++) {
+//printf("bank enabled base:%x\n", &membase[j]);
membase[j] = test[i][j];
ppcDcbf((unsigned long)&(membase[j]));
}
@@ -1160,7 +1170,7 @@
*/
if (window_found == FALSE) {
printf("ERROR: Cannot determine a common read delay.\n");
- hang();
+ spd_ddr_init_hang ();
}
/*
@@ -1310,7 +1320,7 @@
printf("ERROR: Unsupported value for the banksize: %d.\n",
bank_size_id);
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
switch (num_col_addr) {
@@ -1332,7 +1342,7 @@
printf("ERROR: Unsupported value for number of "
"column addresses: %d.\n", num_col_addr);
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
/*
@@ -1340,14 +1350,14 @@
*/
cr |= SDRAM_BXCR_SDBE;
- for (i = 0; i < num_banks; i++) {
+ for (i = 0; i < num_banks; i++) {
bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
(4 << 20) * bank_size_id;
bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
dimm_num, i, ctrl_bank_num[dimm_num]+i,
bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
- }
+ }
}
}
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 48b9ee2..5fef27b 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -58,8 +58,8 @@
#define SDRAM_DDR2 2
#define SDRAM_NONE 0
-#define MAXDIMMS 2
-#define MAXRANKS 4
+#define MAXDIMMS 2
+#define MAXRANKS 4
#define MAXBXCF 4
#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
@@ -129,6 +129,16 @@
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
#endif
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+ hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
+
/* Private Structure Definitions */
/* enum only to ease code for cas latency setting */
@@ -144,7 +154,7 @@
* Prototypes
*-----------------------------------------------------------------------------*/
static unsigned long sdram_memsize(void);
-void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value);
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
static void get_spd_info(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -528,7 +538,7 @@
dram_size = sdram_memsize();
/* and program tlb entries for this size (dynamic) */
- program_tlb(0, dram_size, MY_TLB_WORD2_I_ENABLE);
+ program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
/*------------------------------------------------------------------
* DQS calibration.
@@ -582,7 +592,7 @@
if (dimm_found == FALSE) {
printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
}
@@ -629,42 +639,42 @@
"slot %d.\n", (unsigned int)dimm_num);
printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
case 2:
printf("ERROR: EDO DIMM detected in slot %d.\n",
(unsigned int)dimm_num);
printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
case 3:
printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
(unsigned int)dimm_num);
printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
case 4:
printf("ERROR: SDRAM DIMM detected in slot %d.\n",
(unsigned int)dimm_num);
printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
case 5:
printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
(unsigned int)dimm_num);
printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
case 6:
printf("ERROR: SGRAM DIMM detected in slot %d.\n",
(unsigned int)dimm_num);
printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
case 7:
debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num);
@@ -679,7 +689,7 @@
(unsigned int)dimm_num);
printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
}
}
@@ -689,7 +699,7 @@
&& (dimm_populated[dimm_num] != SDRAM_NONE)
&& (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
- hang();
+ spd_ddr_init_hang ();
}
}
}
@@ -764,7 +774,7 @@
(unsigned int)(calc_cycle_time*10));
printf("Replace the DIMM, or change DDR frequency via "
"strapping bits.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
}
}
@@ -796,7 +806,7 @@
"slot %d is not supported.\n", dimm_rank, dimm_num);
printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
} else
total_rank += dimm_rank;
}
@@ -805,7 +815,7 @@
"for all slots.\n", (unsigned int)total_rank);
printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
printf("Remove one of the DIMM modules.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
}
}
@@ -830,28 +840,28 @@
printf("This DIMM is 5.0 Volt/TTL.\n");
printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
(unsigned int)dimm_num);
- hang();
+ spd_ddr_init_hang ();
break;
case 0x01:
printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
printf("This DIMM is LVTTL.\n");
printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
(unsigned int)dimm_num);
- hang();
+ spd_ddr_init_hang ();
break;
case 0x02:
printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
printf("This DIMM is 1.5 Volt.\n");
printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
(unsigned int)dimm_num);
- hang();
+ spd_ddr_init_hang ();
break;
case 0x03:
printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
printf("This DIMM is 3.3 Volt/TTL.\n");
printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
(unsigned int)dimm_num);
- hang();
+ spd_ddr_init_hang ();
break;
case 0x04:
/* 2.5 Voltage only for DDR1 */
@@ -863,7 +873,7 @@
printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
(unsigned int)dimm_num);
- hang();
+ spd_ddr_init_hang ();
break;
}
}
@@ -1006,13 +1016,13 @@
if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
if (buf0 != buf1) {
printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
- hang();
+ spd_ddr_init_hang ();
}
}
if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
- hang();
+ spd_ddr_init_hang ();
}
else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
mcopt1 |= SDRAM_MCOPT1_DMWD_64;
@@ -1020,7 +1030,7 @@
mcopt1 |= SDRAM_MCOPT1_DMWD_32;
} else {
printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
if (ecc_enabled == TRUE)
@@ -1209,7 +1219,7 @@
break;
default:
printf("ERROR: ucode error on selected_cas value %d", selected_cas);
- hang();
+ spd_ddr_init_hang ();
break;
}
@@ -1241,7 +1251,7 @@
break;
default:
printf("ERROR: write recovery not support (%d)", write_recovery);
- hang();
+ spd_ddr_init_hang ();
break;
}
#else
@@ -1259,7 +1269,7 @@
ods = ODS_REDUCED;
} else {
printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
- hang();
+ spd_ddr_init_hang ();
}
mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
@@ -1284,7 +1294,7 @@
mtsdram(SDRAM_INITPLR13, 0x80800000 | emr); /* EMR OCD Exit */
} else {
printf("ERROR: ucode error as unknown DDR type in program_initplr");
- hang();
+ spd_ddr_init_hang ();
}
}
@@ -1389,7 +1399,7 @@
} else {
printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
"in slot %d\n", (unsigned int)dimm_num);
- hang();
+ spd_ddr_init_hang ();
}
} else {
/* Convert from hex to decimal */
@@ -1526,7 +1536,7 @@
printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
} else { /* DDR2 */
debug("cas_3_0_available=%d\n", cas_3_0_available);
@@ -1549,7 +1559,7 @@
cas_3_0_available, cas_4_0_available, cas_5_0_available);
printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n",
sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
- hang();
+ spd_ddr_init_hang ();
}
}
@@ -1658,7 +1668,7 @@
printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
(unsigned int)dimm_num);
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
break;
}
@@ -2066,7 +2076,7 @@
printf("ERROR: Unsupported value for number of "
"column addresses: %d.\n", (unsigned int)num_col_addr);
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
}
@@ -2148,7 +2158,7 @@
printf("ERROR: Unsupported value for the banksize: %d.\n",
(unsigned int)rank_size_id);
printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
+ spd_ddr_init_hang ();
}
if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
@@ -2693,7 +2703,7 @@
printf("\nERROR: Cannot determine a common read delay for the "
"DIMM(s) installed.\n");
debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
- hang();
+ spd_ddr_init_hang ();
}
blank_string(strlen(str));
@@ -2849,7 +2859,7 @@
if (window_found == FALSE) {
printf("ERROR: Cannot determine a common read delay for the "
"DIMM(s) installed.\n");
- hang();
+ spd_ddr_init_hang ();
}
/*------------------------------------------------------------------
diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk
index 119e061..4fd5108 100644
--- a/cpu/ppc4xx/config.mk
+++ b/cpu/ppc4xx/config.mk
@@ -22,5 +22,13 @@
#
PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
+PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -msoft-float
-PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -Wa,-m405 -mcpu=405 -msoft-float
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is440=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
+
+ifneq (,$(findstring CONFIG_440,$(is440)))
+PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
+else
+PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
+endif
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 66e8637..351da36 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -153,7 +153,7 @@
*/
asm volatile(" bl 0f" ::: "lr");
asm volatile("0: mflr 3" ::: "r3");
- asm volatile(" addi 4, 0, 14" ::: "r4");
+ asm volatile(" addi 4, 0, 14" ::: "r4");
asm volatile(" mtctr 4" ::: "ctr");
asm volatile("1: icbt 0, 3");
asm volatile(" addi 3, 3, 32" ::: "r3");
@@ -211,6 +211,8 @@
val = mfspr(tcr);
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
+#elif defined(CONFIG_440EPX)
+ val |= 0xb0000000; /* generate system reset after 1.34 seconds */
#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
#endif
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
index dd84e58..5235203 100644
--- a/cpu/ppc4xx/gpio.c
+++ b/cpu/ppc4xx/gpio.c
@@ -103,6 +103,18 @@
out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~GPIO_VAL(pin));
}
+int gpio_read_out_bit(int pin)
+{
+ u32 offs = 0;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ return (in32(GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
+}
+
#if defined(CFG_440_GPIO_TABLE)
void gpio_set_chip_configuration(void)
{
@@ -157,12 +169,38 @@
switch (gpio_tab[gpio_core][i].alt_nb) {
case GPIO_SEL:
if (gpio_core == GPIO0) {
- reg = in32(GPIO0_TCR) | (0x80000000 >> (j));
+ /*
+ * Setup output value
+ * 1 -> high level
+ * 0 -> low level
+ * else -> don't touch
+ */
+ reg = in32(GPIO0_OR);
+ if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
+ reg |= (0x80000000 >> (i));
+ else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
+ reg &= ~(0x80000000 >> (i));
+ out32(GPIO0_OR, reg);
+
+ reg = in32(GPIO0_TCR) | (0x80000000 >> (i));
out32(GPIO0_TCR, reg);
}
if (gpio_core == GPIO1) {
- reg = in32(GPIO1_TCR) | (0x80000000 >> (j));
+ /*
+ * Setup output value
+ * 1 -> high level
+ * 0 -> low level
+ * else -> don't touch
+ */
+ reg = in32(GPIO0_OR);
+ if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
+ reg |= (0x80000000 >> (i));
+ else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
+ reg &= ~(0x80000000 >> (i));
+ out32(GPIO0_OR, reg);
+
+ reg = in32(GPIO1_TCR) | (0x80000000 >> (i));
out32(GPIO1_TCR, reg);
}
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 78d0042..8ecaaea 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -22,26 +22,27 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-/*------------------------------------------------------------------------------+ */
-/* */
-/* This source code has been made available to you by IBM on an AS-IS */
-/* basis. Anyone receiving this source is licensed under IBM */
-/* copyrights to use it in any way he or she deems fit, including */
-/* copying it, modifying it, compiling it, and redistributing it either */
-/* with or without modifications. No license under IBM patents or */
-/* patent applications is to be implied by the copyright license. */
-/* */
-/* Any user of this software should understand that IBM cannot provide */
-/* technical support for this software and will not be responsible for */
-/* any consequences resulting from the use of this software. */
-/* */
-/* Any person who transfers this source code or any derivative work */
-/* must include the IBM copyright notice, this paragraph, and the */
-/* preceding two paragraphs in the transferred software. */
-/* */
-/* COPYRIGHT I B M CORPORATION 1995 */
-/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
+/*------------------------------------------------------------------------------+
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *-------------------------------------------------------------------------------
+ */
/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
*
@@ -59,7 +60,6 @@
* address and (s)dram will be positioned at address 0
*/
#include <config.h>
-#include <mpc8xx.h>
#include <ppc4xx.h>
#include <version.h>
@@ -110,11 +110,11 @@
# endif
#endif /* CFG_INIT_DCACHE_CS */
-#define function_prolog(func_name) .text; \
+#define function_prolog(func_name) .text; \
.align 2; \
.globl func_name; \
func_name:
-#define function_epilog(func_name) .type func_name,@function; \
+#define function_epilog(func_name) .type func_name,@function; \
.size func_name,.-func_name
/* We don't want the MMU yet.
@@ -294,11 +294,13 @@
mtspr ivor7,r1 /* Floating point unavailable */
li r1,0x0c00
mtspr ivor8,r1 /* System call */
- li r1,0x1000
- mtspr ivor10,r1 /* Decrementer (PIT for 440) */
- li r1,0x1400
- mtspr ivor13,r1 /* Data TLB error */
+ li r1,0x0a00
+ mtspr ivor9,r1 /* Auxiliary Processor unavailable */
+ li r1,0x0900
+ mtspr ivor10,r1 /* Decrementer */
li r1,0x1300
+ mtspr ivor13,r1 /* Data TLB error */
+ li r1,0x1400
mtspr ivor14,r1 /* Instr TLB error */
li r1,0x2000
mtspr ivor15,r1 /* Debug */
@@ -503,11 +505,81 @@
.ascii " (", __DATE__, " - ", __TIME__, ")"
.ascii CONFIG_IDENT_STRING, "\0"
-/*
- * Maybe this should be moved somewhere else because the current
- * location (0x100) is where the CriticalInput Execption should be.
- */
. = EXC_OFF_SYS_RESET
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Critical input. */
+ CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
+
+#ifdef CONFIG_440
+/* Machine check */
+ MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+#else
+ CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+#endif /* CONFIG_440 */
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r20,MSR_KERNEL
+ rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
+ lwz r6,GOT(transfer_to_handler)
+ mtlr r6
+ blrl
+.L_Alignment:
+ .long AlignmentException - _start + _START_OFFSET
+ .long int_return - _start + _START_OFFSET
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r20,MSR_KERNEL
+ rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
+ lwz r6,GOT(transfer_to_handler)
+ mtlr r6
+ blrl
+.L_ProgramCheck:
+ .long ProgramCheckException - _start + _START_OFFSET
+ .long int_return - _start + _START_OFFSET
+
+#ifdef CONFIG_440
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+ STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
+ STD_EXCEPTION(0xa00, APU, UnknownException)
+#endif
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+
+#ifdef CONFIG_440
+ STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
+#else
+ STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+#endif
+ CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
+
+ .globl _end_of_vectors
+_end_of_vectors:
+ . = _START_OFFSET
#endif
.globl _start
_start:
@@ -817,21 +889,21 @@
*/
lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
ori r3,r3,CFG_OCM_DATA_ADDR@l
- ori r3,r3,0x8270 /* 32K Offset, 16K for Bank 1, R/W/Enable */
+ ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
mtdcr ocmplb3cr1,r3 /* Set PLB Access */
ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
mtdcr ocmplb3cr2,r3 /* Set PLB Access */
isync
- lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
+ lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
ori r3,r3,CFG_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr ocmdscr1, r3 /* Set Data Side */
- mtdcr ocmiscr1, r3 /* Set Instruction Side */
+ ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
+ mtdcr ocmdscr1, r3 /* Set Data Side */
+ mtdcr ocmiscr1, r3 /* Set Instruction Side */
ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr ocmdscr2, r3 /* Set Data Side */
- mtdcr ocmiscr2, r3 /* Set Instruction Side */
- addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
+ mtdcr ocmdscr2, r3 /* Set Data Side */
+ mtdcr ocmiscr2, r3 /* Set Instruction Side */
+ addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
mtdcr ocmdsisdpc,r3
isync
@@ -850,7 +922,7 @@
mtdcr ocmdscntl, r4 /* set data-side IRAM config */
isync
- lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
+ lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
ori r3,r3,CFG_OCM_DATA_ADDR@l
mtdcr ocmdsarc, r3
addis r4, 0, 0xC000 /* OCM data area enabled */
@@ -1017,107 +1089,6 @@
#ifndef CONFIG_NAND_SPL
-/*****************************************************************************/
- .globl _start_of_vectors
-_start_of_vectors:
-
-#if 0
-/*TODO Fixup _start above so we can do this*/
-/* Critical input. */
- CRIT_EXCEPTION(0x100, CritcalInput, CritcalInputException)
-#endif
-
-/* Machine check */
- CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- li r20,MSR_KERNEL
- rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
- lwz r6,GOT(transfer_to_handler)
- mtlr r6
- blrl
-.L_Alignment:
- .long AlignmentException - _start + EXC_OFF_SYS_RESET
- .long int_return - _start + EXC_OFF_SYS_RESET
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG
- addi r3,r1,STACK_FRAME_OVERHEAD
- li r20,MSR_KERNEL
- rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
- lwz r6,GOT(transfer_to_handler)
- mtlr r6
- blrl
-.L_ProgramCheck:
- .long ProgramCheckException - _start + EXC_OFF_SYS_RESET
- .long int_return - _start + EXC_OFF_SYS_RESET
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /* On the MPC8xx, this is a software emulation interrupt. It occurs
- * for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, PIT, PITException)
-
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
- CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x2100
-
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception.
@@ -1133,28 +1104,12 @@
SAVE_4GPRS(8, r21)
SAVE_8GPRS(12, r21)
SAVE_8GPRS(24, r21)
-#if 0
- andi. r23,r23,MSR_PR
- mfspr r23,SPRG3 /* if from user, fix up tss.regs */
- beq 2f
- addi r24,r1,STACK_FRAME_OVERHEAD
- stw r24,PT_REGS(r23)
-2: addi r2,r23,-TSS /* set r2 to current */
- tovirt(r2,r2,r23)
-#endif
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r21)
li r22,0
stw r22,RESULT(r21)
mtspr SPRG2,r22 /* r1 is now kernel sp */
-#if 0
- addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
- cmplw 0,r1,r2
- cmplw 1,r1,r24
- crand 1,1,4
- bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
-#endif
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
mtspr SRR0,r24
@@ -1215,16 +1170,72 @@
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
- mtspr 990,r2 /* SRR2 */
- mtspr 991,r0 /* SRR3 */
+ mtspr csrr0,r2
+ mtspr csrr1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
SYNC
rfci
-/* Cache functions.
-*/
+#ifdef CONFIG_440
+mck_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr mcsrr0,r2
+ mtspr mcsrr1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfmci
+#endif /* CONFIG_440 */
+
+
+/*
+ * Cache functions.
+ *
+ * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
+ * although for some cache-ralated calls stubs have to be provided to satisfy
+ * symbols resolution.
+ * Icache-related functions are used in POST framework.
+ *
+ */
+#ifdef CONFIG_440
+ .globl dcache_disable
+ .globl icache_disable
+ .globl icache_enable
+dcache_disable:
+icache_disable:
+icache_enable:
+ blr
+
+ .globl dcache_status
+ .globl icache_status
+dcache_status:
+icache_status:
+ mr r3, 0
+ blr
+#else
flush_dcache:
addis r9,r0,0x0002 /* set mask for EE and CE msr bits */
ori r9,r9,0x8000
@@ -1303,24 +1314,13 @@
mfdccr r3
srwi r3, r3, 31 /* >>31 => select bit 0 */
blr
+#endif
.globl get_pvr
get_pvr:
mfspr r3, PVR
blr
-#if !defined(CONFIG_440)
- .globl wr_pit
-wr_pit:
- mtspr pit, r3
- blr
-#endif
-
- .globl wr_tcr
-wr_tcr:
- mtspr tcr, r3
- blr
-
/*------------------------------------------------------------------------------- */
/* Function: out16 */
/* Description: Output 16 bits */
@@ -1518,7 +1518,7 @@
* initialization, now running from RAM.
*/
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ addi r0, r10, in_ram - _start + _START_OFFSET
mtlr r0
blr /* NEVER RETURNS! */
@@ -1588,7 +1588,7 @@
*/
.globl trap_init
trap_init:
- lwz r7, GOT(_start)
+ lwz r7, GOT(_start_of_vectors)
lwz r8, GOT(_end_of_vectors)
li r9, 0x100 /* reset vector always at 0x100 */
@@ -1608,35 +1608,48 @@
/*
* relocate `hdlr' and `int_return' entries
*/
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
+ li r7, .L_MachineCheck - _start + _START_OFFSET
+ li r8, Alignment - _start + _START_OFFSET
2:
bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
+ addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 2b
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ li r7, .L_Alignment - _start + _START_OFFSET
bl trap_reloc
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ li r7, .L_ProgramCheck - _start + _START_OFFSET
bl trap_reloc
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
+#ifdef CONFIG_440
+ li r7, .L_FPUnavailable - _start + _START_OFFSET
bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
+ li r7, .L_Decrementer - _start + _START_OFFSET
bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
+
+ li r7, .L_APU - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_InstructionTLBError - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_DataTLBError - _start + _START_OFFSET
+ bl trap_reloc
+#else /* CONFIG_440 */
+ li r7, .L_PIT - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_InstructionTLBMiss - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_DataTLBMiss - _start + _START_OFFSET
+ bl trap_reloc
+#endif /* CONFIG_440 */
+
+ li r7, .L_DebugBreakpoint - _start + _START_OFFSET
+ bl trap_reloc
#if !defined(CONFIG_440)
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
@@ -1679,13 +1692,13 @@
+----------------------------------------------------------------------------*/
function_prolog(dcbz_area)
rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ra2
- addi r5,r5,0x0001
-..d_ra2:mtctr r5
-..d_ag2:dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag2
+ rlwinm r5,r4,27,5,31
+ beq ..d_ra2
+ addi r5,r5,0x0001
+..d_ra2:mtctr r5
+..d_ag2:dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag2
sync
blr
function_epilog(dcbz_area)
@@ -1694,26 +1707,26 @@
| dflush. Assume 32K at vector address is cachable.
+----------------------------------------------------------------------------*/
function_prolog(dflush)
- mfmsr r9
- rlwinm r8,r9,0,15,13
- rlwinm r8,r8,0,17,15
- mtmsr r8
- addi r3,r0,0x0000
- mtspr dvlim,r3
- mfspr r3,ivpr
- addi r4,r0,1024
- mtctr r4
+ mfmsr r9
+ rlwinm r8,r9,0,15,13
+ rlwinm r8,r8,0,17,15
+ mtmsr r8
+ addi r3,r0,0x0000
+ mtspr dvlim,r3
+ mfspr r3,ivpr
+ addi r4,r0,1024
+ mtctr r4
..dflush_loop:
- lwz r6,0x0(r3)
- addi r3,r3,32
- bdnz ..dflush_loop
- addi r3,r3,-32
- mtctr r4
-..ag: dcbf r0,r3
- addi r3,r3,-32
- bdnz ..ag
+ lwz r6,0x0(r3)
+ addi r3,r3,32
+ bdnz ..dflush_loop
+ addi r3,r3,-32
+ mtctr r4
+..ag: dcbf r0,r3
+ addi r3,r3,-32
+ bdnz ..ag
sync
- mtmsr r9
+ mtmsr r9
blr
function_epilog(dflush)
#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index 50344a4..049a785 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -36,7 +36,8 @@
unsigned long tlb_word2_i_value;
} region_t;
-static int add_tlb_entry(unsigned long base_addr,
+static int add_tlb_entry(unsigned long phys_addr,
+ unsigned long virt_addr,
unsigned long tlb_word0_size_value,
unsigned long tlb_word2_i_value)
{
@@ -55,9 +56,9 @@
return -1;
/* Second, create the TLB entry */
- tlb_word0_value = TLB_WORD0_EPN_ENCODE(base_addr) | TLB_WORD0_V_ENABLE |
+ tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
TLB_WORD0_TS_0 | tlb_word0_size_value;
- tlb_word1_value = TLB_WORD1_RPN_ENCODE(base_addr) | TLB_WORD1_ERPN_ENCODE(0);
+ tlb_word1_value = TLB_WORD1_RPN_ENCODE(phys_addr) | TLB_WORD1_ERPN_ENCODE(0);
tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
TLB_WORD2_W_DISABLE | tlb_word2_i_value |
@@ -81,7 +82,9 @@
return 0;
}
-static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size,
+static void program_tlb_addr(unsigned long phys_addr,
+ unsigned long virt_addr,
+ unsigned long mem_size,
unsigned long tlb_word2_i_value)
{
int rc;
@@ -91,70 +94,86 @@
while (mem_size != 0) {
rc = 0;
/* Add the TLB entries in to map the region. */
- if (((base_addr & TLB_256MB_ALIGN_MASK) == base_addr) &&
+ if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
(mem_size >= TLB_256MB_SIZE)) {
/* Add a 256MB TLB entry */
- if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
mem_size -= TLB_256MB_SIZE;
- base_addr += TLB_256MB_SIZE;
+ phys_addr += TLB_256MB_SIZE;
+ virt_addr += TLB_256MB_SIZE;
}
- } else if (((base_addr & TLB_16MB_ALIGN_MASK) == base_addr) &&
+ } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
(mem_size >= TLB_16MB_SIZE)) {
/* Add a 16MB TLB entry */
- if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
mem_size -= TLB_16MB_SIZE;
- base_addr += TLB_16MB_SIZE;
+ phys_addr += TLB_16MB_SIZE;
+ virt_addr += TLB_16MB_SIZE;
}
- } else if (((base_addr & TLB_1MB_ALIGN_MASK) == base_addr) &&
+ } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
(mem_size >= TLB_1MB_SIZE)) {
/* Add a 1MB TLB entry */
- if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
mem_size -= TLB_1MB_SIZE;
- base_addr += TLB_1MB_SIZE;
+ phys_addr += TLB_1MB_SIZE;
+ virt_addr += TLB_1MB_SIZE;
}
- } else if (((base_addr & TLB_256KB_ALIGN_MASK) == base_addr) &&
+ } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
(mem_size >= TLB_256KB_SIZE)) {
/* Add a 256KB TLB entry */
- if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
mem_size -= TLB_256KB_SIZE;
- base_addr += TLB_256KB_SIZE;
+ phys_addr += TLB_256KB_SIZE;
+ virt_addr += TLB_256KB_SIZE;
}
- } else if (((base_addr & TLB_64KB_ALIGN_MASK) == base_addr) &&
+ } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
(mem_size >= TLB_64KB_SIZE)) {
/* Add a 64KB TLB entry */
- if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
mem_size -= TLB_64KB_SIZE;
- base_addr += TLB_64KB_SIZE;
+ phys_addr += TLB_64KB_SIZE;
+ virt_addr += TLB_64KB_SIZE;
}
- } else if (((base_addr & TLB_16KB_ALIGN_MASK) == base_addr) &&
+ } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
(mem_size >= TLB_16KB_SIZE)) {
/* Add a 16KB TLB entry */
- if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
mem_size -= TLB_16KB_SIZE;
- base_addr += TLB_16KB_SIZE;
+ phys_addr += TLB_16KB_SIZE;
+ virt_addr += TLB_16KB_SIZE;
}
- } else if (((base_addr & TLB_4KB_ALIGN_MASK) == base_addr) &&
+ } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
(mem_size >= TLB_4KB_SIZE)) {
/* Add a 4KB TLB entry */
- if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
mem_size -= TLB_4KB_SIZE;
- base_addr += TLB_4KB_SIZE;
+ phys_addr += TLB_4KB_SIZE;
+ virt_addr += TLB_4KB_SIZE;
}
- } else if (((base_addr & TLB_1KB_ALIGN_MASK) == base_addr) &&
+ } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
(mem_size >= TLB_1KB_SIZE)) {
/* Add a 1KB TLB entry */
- if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
mem_size -= TLB_1KB_SIZE;
- base_addr += TLB_1KB_SIZE;
+ phys_addr += TLB_1KB_SIZE;
+ virt_addr += TLB_1KB_SIZE;
}
} else {
printf("ERROR: no TLB size exists for the base address 0x%0X.\n",
- base_addr);
+ phys_addr);
}
if (rc != 0)
printf("ERROR: no TLB entries available for the base addr 0x%0X.\n",
- base_addr);
+ phys_addr);
}
return;
@@ -166,16 +185,16 @@
* Common usage for boards with SDRAM DIMM modules to dynamically
* configure the TLB's for the SDRAM
*/
-void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value)
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
{
region_t region_array;
- region_array.base = start;
+ region_array.base = phys_addr;
region_array.size = size;
region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */
/* Call the routine to add in the tlb entries for the memory regions */
- program_tlb_addr(region_array.base, region_array.size,
+ program_tlb_addr(region_array.base, virt_addr, region_array.size,
region_array.tlb_word2_i_value);
return;
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
old mode 100644
new mode 100755
index 6aecca2..eb9420e
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
@@ -36,6 +36,8 @@
#include <command.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
int (*debugger_exception_handler)(struct pt_regs *) = 0;
#endif
@@ -45,8 +47,7 @@
/* THIS NEEDS CHANGING to use the board info structure.
*/
-#define END_OF_MEM 0x00400000
-
+#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
static __inline__ void set_tsr(unsigned long val)
{
@@ -110,7 +111,7 @@
{
int i;
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n",
regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
@@ -120,14 +121,12 @@
printf("\n");
for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
+ if ((i % 8) == 0) {
printf("GPR%02d: ", i);
}
printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
+ if ((i % 8) == 7) {
printf("\n");
}
}
@@ -139,13 +138,16 @@
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+ panic("Exception");
}
void
MachineCheckException(struct pt_regs *regs)
{
- unsigned long fixup;
+ unsigned long fixup, val;
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ u32 value2;
+#endif
/* Probing PCI using config cycles cause this exception
* when a device is not present. Catch it and return to
@@ -161,26 +163,132 @@
return;
#endif
- printf("Machine check in kernel mode.\n");
+ printf("Machine Check Exception.\n");
printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
+ printf("regs %p ", regs);
+
+ val = get_esr();
+
+#if !defined(CONFIG_440)
+ if (val& ESR_IMCP) {
+ printf("Instruction");
+ mtspr(ESR, val & ~ESR_IMCP);
+ } else {
+ printf("Data");
+ }
+ printf(" machine check.\n");
+
+#elif defined(CONFIG_440)
+ if (val& ESR_IMCP){
+ printf("Instruction Synchronous Machine Check exception\n");
+ mtspr(SPRN_ESR, val & ~ESR_IMCP);
+ } else {
+ val = mfspr(MCSR);
+ if (val & MCSR_IB)
+ printf("Instruction Read PLB Error\n");
+ if (val & MCSR_DRB)
+ printf("Data Read PLB Error\n");
+ if (val & MCSR_DWB)
+ printf("Data Write PLB Error\n");
+ if (val & MCSR_TLBP)
+ printf("TLB Parity Error\n");
+ if (val & MCSR_ICP){
+ /*flush_instruction_cache(); */
+ printf("I-Cache Parity Error\n");
+ }
+ if (val & MCSR_DCSP)
+ printf("D-Cache Search Parity Error\n");
+ if (val & MCSR_DCFP)
+ printf("D-Cache Flush Parity Error\n");
+ if (val & MCSR_IMPE)
+ printf("Machine Check exception is imprecise\n");
+
+ /* Clear MCSR */
+ mtspr(SPRN_MCSR, val);
+ }
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ mfsdram(DDR0_00, val) ;
+ printf("DDR0: DDR0_00 %p\n", val);
+ val = (val >> 16) & 0xff;
+ if (val & 0x80)
+ printf("DDR0: At least one interrupt active\n");
+ if (val & 0x40)
+ printf("DDR0: DRAM initialization complete.\n");
+ if (val & 0x20)
+ printf("DDR0: Multiple uncorrectable ECC events.\n");
+ if (val & 0x10)
+ printf("DDR0: Single uncorrectable ECC event.\n");
+ if (val & 0x08)
+ printf("DDR0: Multiple correctable ECC events.\n");
+ if (val & 0x04)
+ printf("DDR0: Single correctable ECC event.\n");
+ if (val & 0x02)
+ printf("Multiple accesses outside the defined"
+ " physical memory space detected\n");
+ if (val & 0x01)
+ printf("DDR0: Single access outside the defined"
+ " physical memory space detected.\n");
+
+ mfsdram(DDR0_01, val);
+ val = (val >> 8) & 0x7;
+ switch (val ) {
+ case 0:
+ printf("DDR0: Write Out-of-Range command\n");
break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
+ case 1:
+ printf("DDR0: Read Out-of-Range command\n");
break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
+ case 2:
+ printf("DDR0: Masked write Out-of-Range command\n");
break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
+ case 4:
+ printf("DDR0: Wrap write Out-of-Range command\n");
+ break;
+ case 5:
+ printf("DDR0: Wrap read Out-of-Range command\n");
break;
default:
- printf("Unknown values in msr\n");
+ mfsdram(DDR0_01, value2);
+ printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2);
}
+ mfsdram(DDR0_23, val);
+ if ( (val >> 16) & 0xff)
+ printf("DDR0: Syndrome for correctable ECC event 0x%x\n",
+ (val >> 16) & 0xff);
+ mfsdram(DDR0_23, val);
+ if ( (val >> 8) & 0xff)
+ printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n",
+ (val >> 8) & 0xff);
+ mfsdram(DDR0_33, val);
+ if (val)
+ printf("DDR0: Address of command that caused an "
+ "Out-of-Range interrupt %p\n", val);
+ mfsdram(DDR0_34, val);
+ if (val)
+ printf("DDR0: Address of uncorrectable ECC event %p\n", val);
+ mfsdram(DDR0_35, val);
+ if (val)
+ printf("DDR0: Address of uncorrectable ECC event %p\n", val);
+ mfsdram(DDR0_36, val);
+ if (val)
+ printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
+ mfsdram(DDR0_37, val);
+ if (val)
+ printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
+ mfsdram(DDR0_38, val);
+ if (val)
+ printf("DDR0: Address of correctable ECC event %p\n", val);
+ mfsdram(DDR0_39, val);
+ if (val)
+ printf("DDR0: Address of correctable ECC event %p\n", val);
+ mfsdram(DDR0_40, val);
+ if (val)
+ printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
+ mfsdram(DDR0_41, val);
+ if (val)
+ printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
+#endif /* CONFIG_440EPX */
+#endif /* CONFIG_440 */
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("machine check");
@@ -224,7 +332,7 @@
}
void
-PITException(struct pt_regs *regs)
+DecrementerPITException(struct pt_regs *regs)
{
/*
* Reset PIT interrupt
@@ -272,17 +380,17 @@
__asm__ __volatile__( \
"1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
return (retval);
#endif
diff --git a/disk/part.c b/disk/part.c
index 255b140..6ab5857 100755
--- a/disk/part.c
+++ b/disk/part.c
@@ -180,7 +180,6 @@
(CONFIG_COMMANDS & CFG_CMD_SCSI) || \
(CONFIG_COMMANDS & CFG_CMD_USB) || \
defined(CONFIG_MMC) || \
- (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
defined(CONFIG_SYSTEMACE) )
#if defined(CONFIG_MAC_PARTITION) || \
@@ -223,7 +222,7 @@
int get_partition_info (block_dev_desc_t *dev_desc, int part
, disk_partition_t *info)
{
- switch (dev_desc->part_type) {
+ switch (dev_desc->part_type) {
#ifdef CONFIG_MAC_PARTITION
case PART_TYPE_MAC:
if (get_partition_info_mac(dev_desc,part,info) == 0) {
diff --git a/doc/README.ppc440 b/doc/README.ppc440
index 08f34f5..2e04aba 100644
--- a/doc/README.ppc440
+++ b/doc/README.ppc440
@@ -146,12 +146,13 @@
space begins at PCI I/O address 0 and the PCI memory space is
256 MB starting at PCI address CFG_PCI_TARGBASE. After the
pci_controller structure is initialized, the cpu-specific code will
-call the routine pci_pre_init() if the CFG_PCI_PRE_INIT flag is
-defined. This routine is implemented by board-specific code & is where
-the board can over-ride/extend the default pci_controller structure
-settings and do other pre-initialization tasks. If pci_pre_init()
-returns a value of zero, PCI initialization is aborted; otherwise the
-controller structure is registered and initialization continues.
+call the routine pci_pre_init(). This routine is implemented by
+board-specific code & is where the board can over-ride/extend the
+default pci_controller structure settings and exspecially provide
+a routine to map the PCI interrupts and do other pre-initialization
+tasks. If pci_pre_init() returns a value of zero, PCI initialization
+is aborted; otherwise the controller structure is registered and
+initialization continues.
The default 440GP PCI target configuration is minimal -- it assumes that
the strapping registers are set as necessary. Since the strapping bits
diff --git a/drivers/Makefile b/drivers/Makefile
index c7fcc3f..48fd4ea 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -27,7 +27,7 @@
LIB = $(obj)libdrivers.a
-COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
+COBJS = 3c589.o 5701rls.o ali512x.o ata_piix.o atmel_usart.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o enc28j60.o \
diff --git a/drivers/ata_piix.c b/drivers/ata_piix.c
new file mode 100644
index 0000000..42456d7
--- /dev/null
+++ b/drivers/ata_piix.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) Procsys. All rights reserved.
+ * Author: Mushtaq Khan <mushtaq_k@procsys.com>
+ * <mushtaqk_921@yahoo.co.in>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * with the reference to ata_piix driver in kernel 2.4.32
+ */
+
+/*
+ * This file contains SATA controller and SATA drive initialization functions
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <command.h>
+#include <config.h>
+#include <asm/byteorder.h>
+#include <ide.h>
+#include <ata.h>
+
+#ifdef CFG_ATA_PIIX /*ata_piix driver */
+
+#define DEBUG_SATA 0 /*For debug prints set DEBUG_SATA to 1 */
+
+#define DRV_DECL /*For file specific declarations */
+#include <sata.h>
+#undef DRV_DECL
+
+/*Macros realted to PCI*/
+#define PCI_SATA_BUS 0x00
+#define PCI_SATA_DEV 0x1f
+#define PCI_SATA_FUNC 0x02
+
+#define PCI_SATA_BASE1 0x10
+#define PCI_SATA_BASE2 0x14
+#define PCI_SATA_BASE3 0x18
+#define PCI_SATA_BASE4 0x1c
+#define PCI_SATA_BASE5 0x20
+#define PCI_PMR 0x90
+#define PCI_PI 0x09
+#define PCI_PCS 0x92
+#define PCI_DMA_CTL 0x48
+
+#define PORT_PRESENT (1<<0)
+#define PORT_ENABLED (1<<4)
+
+u32 bdf;
+u32 iobase1 = 0; /*Primary cmd block */
+u32 iobase2 = 0; /*Primary ctl block */
+u32 iobase3 = 0; /*Sec cmd block */
+u32 iobase4 = 0; /*sec ctl block */
+u32 iobase5 = 0; /*BMDMA*/
+int
+pci_sata_init (void)
+{
+ u32 bus = PCI_SATA_BUS;
+ u32 dev = PCI_SATA_DEV;
+ u32 fun = PCI_SATA_FUNC;
+ u16 cmd = 0;
+ u8 lat = 0, pcibios_max_latency = 0xff;
+ u8 pmr; /*Port mapping reg */
+ u8 pi; /*Prgming Interface reg */
+
+ bdf = PCI_BDF (bus, dev, fun);
+ pci_read_config_dword (bdf, PCI_SATA_BASE1, &iobase1);
+ pci_read_config_dword (bdf, PCI_SATA_BASE2, &iobase2);
+ pci_read_config_dword (bdf, PCI_SATA_BASE3, &iobase3);
+ pci_read_config_dword (bdf, PCI_SATA_BASE4, &iobase4);
+ pci_read_config_dword (bdf, PCI_SATA_BASE5, &iobase5);
+
+ if ((iobase1 == 0xFFFFFFFF) || (iobase2 == 0xFFFFFFFF) ||
+ (iobase3 == 0xFFFFFFFF) || (iobase4 == 0xFFFFFFFF) ||
+ (iobase5 == 0xFFFFFFFF)) {
+ printf ("error no base addr for SATA controller\n");
+ return 1;
+ /*ERROR*/}
+
+ iobase1 &= 0xFFFFFFFE;
+ iobase2 &= 0xFFFFFFFE;
+ iobase3 &= 0xFFFFFFFE;
+ iobase4 &= 0xFFFFFFFE;
+ iobase5 &= 0xFFFFFFFE;
+
+ /*check for mode */
+ pci_read_config_byte (bdf, PCI_PMR, &pmr);
+ if (pmr > 1) {
+ printf ("combined mode not supported\n");
+ return 1;
+ }
+
+ pci_read_config_byte (bdf, PCI_PI, &pi);
+ if ((pi & 0x05) != 0x05) {
+ printf ("Sata is in Legacy mode\n");
+ return 1;
+ } else {
+ printf ("sata is in Native mode\n");
+ }
+
+ /*MASTER CFG AND IO CFG */
+ pci_read_config_word (bdf, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
+ pci_write_config_word (bdf, PCI_COMMAND, cmd);
+ pci_read_config_byte (dev, PCI_LATENCY_TIMER, &lat);
+
+ if (lat < 16)
+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+ else if (lat > pcibios_max_latency)
+ lat = pcibios_max_latency;
+ pci_write_config_byte (dev, PCI_LATENCY_TIMER, lat);
+
+ return 0;
+}
+
+int
+sata_bus_probe (int port_no)
+{
+ int orig_mask, mask;
+ u16 pcs;
+
+ mask = (PORT_PRESENT << port_no);
+ pci_read_config_word (bdf, PCI_PCS, &pcs);
+ orig_mask = (int) pcs & 0xff;
+ if ((orig_mask & mask) != mask)
+ return 0;
+ else
+ return 1;
+}
+
+int
+init_sata (void)
+{
+ u8 i, rv = 0;
+
+ for (i = 0; i < CFG_SATA_MAXDEVICES; i++) {
+ sata_dev_desc[i].type = DEV_TYPE_UNKNOWN;
+ sata_dev_desc[i].if_type = IF_TYPE_IDE;
+ sata_dev_desc[i].dev = i;
+ sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
+ sata_dev_desc[i].blksz = 0;
+ sata_dev_desc[i].lba = 0;
+ sata_dev_desc[i].block_read = sata_read;
+ }
+
+ rv = pci_sata_init ();
+ if (rv == 1) {
+ printf ("pci initialization failed\n");
+ return 1;
+ }
+
+ port[0].port_no = 0;
+ port[0].ioaddr.cmd_addr = iobase1;
+ port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr =
+ iobase2 | ATA_PCI_CTL_OFS;
+ port[0].ioaddr.bmdma_addr = iobase5;
+
+ port[1].port_no = 1;
+ port[1].ioaddr.cmd_addr = iobase3;
+ port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr =
+ iobase4 | ATA_PCI_CTL_OFS;
+ port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
+
+ for (i = 0; i < CFG_SATA_MAXBUS; i++)
+ sata_port (&port[i].ioaddr);
+
+ for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+ if (!(sata_bus_probe (i))) {
+ port[i].port_state = 0;
+ printf ("SATA#%d port is not present \n", i);
+ } else {
+ printf ("SATA#%d port is present\n", i);
+ if (sata_bus_softreset (i)) {
+ port[i].port_state = 0;
+ } else {
+ port[i].port_state = 1;
+ }
+ }
+ }
+
+ for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+ u8 j, devno;
+
+ if (port[i].port_state == 0)
+ continue;
+ for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
+ sata_identify (i, j);
+ set_Feature_cmd (i, j);
+ devno = i * CFG_SATA_DEVS_PER_BUS + j;
+ if ((sata_dev_desc[devno].lba > 0) &&
+ (sata_dev_desc[devno].blksz > 0)) {
+ dev_print (&sata_dev_desc[devno]);
+ /* initialize partition type */
+ init_part (&sata_dev_desc[devno]);
+ if (curr_dev < 0)
+ curr_dev =
+ i * CFG_SATA_DEVS_PER_BUS + j;
+ }
+ }
+ }
+ return 0;
+}
+#endif
diff --git a/drivers/tsec.c b/drivers/tsec.c
index b418773..1298478 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -65,33 +65,31 @@
* FEC_PHYIDX
*/
static struct tsec_info_struct tsec_info[] = {
-#if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1)
-#if defined(CONFIG_MPC8544DS)
+#if defined(CONFIG_TSEC1)
+#if defined(CONFIG_MPC8544DS) || defined(CONFIG_MPC8641HPCN)
{TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
#else
{TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
#endif
-#elif defined(CONFIG_MPC86XX_TSEC1)
- {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
-#else
{0, 0, 0},
#endif
-#if defined(CONFIG_MPC85XX_TSEC2) || defined(CONFIG_MPC83XX_TSEC2)
- {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
-#elif defined(CONFIG_MPC86XX_TSEC2)
+#if defined(CONFIG_TSEC2)
+#if defined(CONFIG_MPC8641HPCN)
{TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX},
#else
+ {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
+#endif
{0, 0, 0},
#endif
#ifdef CONFIG_MPC85XX_FEC
{FEC_PHY_ADDR, 0, FEC_PHYIDX},
#else
-#if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3) || defined(CONFIG_MPC86XX_TSEC3)
+#if defined(CONFIG_TSEC3)
{TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX},
#else
{0, 0, 0},
#endif
-#if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4) || defined(CONFIG_MPC86XX_TSEC4)
+#if defined(CONFIG_TSEC4)
{TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX},
#else
{0, 0, 0},
@@ -928,6 +926,33 @@
},
};
+struct phy_info phy_info_BCM5464S = {
+ 0x02060b1, /* 5464 ID */
+ "Broadcom BCM5464S",
+ 0, /* not clear to me what minor revisions we can shift away */
+ (struct phy_cmd[]) { /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
+
struct phy_info phy_info_M88E1011S = {
0x01410c6,
"Marvell 88E1011S",
@@ -1292,6 +1317,7 @@
&phy_info_cis8204,
&phy_info_cis8201,
&phy_info_BCM5461S,
+ &phy_info_BCM5464S,
&phy_info_M88E1011S,
&phy_info_M88E1111S,
&phy_info_M88E1145,
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 3007608..21a00b8 100755
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -70,10 +70,11 @@
fat_register_device(block_dev_desc_t *dev_desc, int part_no)
{
unsigned char buffer[SECTOR_SIZE];
+ disk_partition_t info;
if (!dev_desc->block_read)
return -1;
- cur_dev=dev_desc;
+ cur_dev = dev_desc;
/* check if we have a MBR (on floppies we have only a PBR) */
if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) {
printf ("** Can't read from device %d **\n", dev_desc->dev);
@@ -84,36 +85,39 @@
/* no signature found */
return -1;
}
- if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) {
- /* ok, we assume we are on a PBR only */
- cur_part = 1;
- part_offset=0;
- }
- else {
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
(CONFIG_COMMANDS & CFG_CMD_SCSI) || \
(CONFIG_COMMANDS & CFG_CMD_USB) || \
- (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
+ (defined(CONFIG_MMC)) || \
defined(CONFIG_SYSTEMACE) )
- disk_partition_t info;
- if(!get_partition_info(dev_desc, part_no, &info)) {
- part_offset = info.start;
- cur_part = part_no;
- }
- else {
- printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev);
- return -1;
- }
+ /* First we assume, there is a MBR */
+ if (!get_partition_info (dev_desc, part_no, &info)) {
+ part_offset = info.start;
+ cur_part = part_no;
+ } else if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3)) {
+ /* ok, we assume we are on a PBR only */
+ cur_part = 1;
+ part_offset = 0;
+ } else {
+ printf ("** Partition %d not valid on device %d **\n", part_no, dev_desc->dev);
+ return -1;
+ }
#else
+ if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) {
+ /* ok, we assume we are on a PBR only */
+ cur_part = 1;
+ part_offset = 0;
+ info.start = part_offset;
+ } else {
/* FIXME we need to determine the start block of the
* partition where the DOS FS resides. This can be done
* by using the get_partition_info routine. For this
* purpose the libpart must be included.
*/
- part_offset=32;
+ part_offset = 32;
cur_part = 1;
-#endif
}
+#endif
return 0;
}
diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h
index ba73bae..4a03cec 100644
--- a/include/74xx_7xx.h
+++ b/include/74xx_7xx.h
@@ -34,6 +34,7 @@
* Exception offsets (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100 /* default system reset offset */
+#define _START_OFFSET EXC_OFF_SYS_RESET
/*----------------------------------------------------------------
* l2cr values
diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h
index 114dc92..c9b6a36 100644
--- a/include/asm-ppc/gpio.h
+++ b/include/asm-ppc/gpio.h
@@ -45,12 +45,14 @@
typedef enum gpio_out { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t;
typedef struct {
- unsigned long add; /* gpio core base address */
- gpio_driver_t in_out; /* Driver Setting */
- gpio_select_t alt_nb; /* Selected Alternate */
+ unsigned long add; /* gpio core base address */
+ gpio_driver_t in_out; /* Driver Setting */
+ gpio_select_t alt_nb; /* Selected Alternate */
+ gpio_out_t out_val;/* Default Output Value */
} gpio_param_s;
#endif
void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
void gpio_write_bit(int pin, int val);
+int gpio_read_out_bit(int pin);
void gpio_set_chip_configuration(void);
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 5efc3ee..9780fe1 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -35,18 +35,18 @@
#define MSR_DWE (1<<10) /* Debug Wait Enable (4xx) */
#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
#define MSR_BE (1<<9) /* Branch Trace */
-#define MSR_DE (1<<9) /* Debug Exception Enable */
+#define MSR_DE (1<<9) /* Debug Exception Enable */
#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */
#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */
-#define MSR_IR (1<<5) /* Instruction Relocate */
+#define MSR_IR (1<<5) /* Instruction Relocate */
#define MSR_IS (1<<5) /* Book E Instruction space */
-#define MSR_DR (1<<4) /* Data Relocate */
+#define MSR_DR (1<<4) /* Data Relocate */
#define MSR_DS (1<<4) /* Book E Data space */
#define MSR_PE (1<<3) /* Protection Enable */
#define MSR_PX (1<<2) /* Protection Exclusive Mode */
#define MSR_PMM (1<<2) /* Performance monitor mark bit (e500) */
#define MSR_RI (1<<1) /* Recoverable Exception */
-#define MSR_LE (1<<0) /* Little Endian */
+#define MSR_LE (1<<0) /* Little Endian */
#ifdef CONFIG_APUS_FAST_EXCEPT
#define MSR_ MSR_ME|MSR_IP|MSR_RI
@@ -123,9 +123,9 @@
#define DBCR_EDM 0x80000000
#define DBCR_IDM 0x40000000
#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
+#define DBCR_RST_NONE 0
+#define DBCR_RST_CORE 1
+#define DBCR_RST_CHIP 2
#define DBCR_RST_SYSTEM 3
#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
@@ -266,7 +266,7 @@
#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
-#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
+#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
#define SPRN_LDSTCR 0x3F8 /* Load/Store Control Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
#define SPRN_LR 0x008 /* Link Register */
@@ -308,7 +308,7 @@
#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
-#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
+#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
#ifdef CONFIG_BOOKE
#define SPRN_SVR 0x3FF /* System Version Register */
#else
@@ -451,6 +451,17 @@
#define SPRN_PID1 0x279 /* Process ID Register 1 */
#define SPRN_PID2 0x27a /* Process ID Register 2 */
#define SPRN_MCSR 0x23c /* Machine Check Syndrome register */
+#ifdef CONFIG_440
+#define MCSR_MCS 0x80000000 /* Machine Check Summary */
+#define MCSR_IB 0x40000000 /* Instruction PLB Error */
+#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
+#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
+#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
+#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
+#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
+#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
+#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
+#endif
#define ESR_ST 0x00800000 /* Store Operation */
#if defined(CONFIG_MPC86xx)
@@ -484,17 +495,17 @@
#define DBCR0 SPRN_DBCR0 /* Debug Control Register 0 */
#define DBCR1 SPRN_DBCR1 /* Debug Control Register 1 */
#define DBSR SPRN_DBSR /* Debug Status Register */
-#define DCMP SPRN_DCMP /* Data TLB Compare Register */
-#define DEC SPRN_DEC /* Decrement Register */
-#define DMISS SPRN_DMISS /* Data TLB Miss Register */
+#define DCMP SPRN_DCMP /* Data TLB Compare Register */
+#define DEC SPRN_DEC /* Decrement Register */
+#define DMISS SPRN_DMISS /* Data TLB Miss Register */
#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
-#define EAR SPRN_EAR /* External Address Register */
+#define EAR SPRN_EAR /* External Address Register */
#define ESR SPRN_ESR /* Exception Syndrome Register */
#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
#define HID1 SPRN_HID1 /* Hardware Implementation Register 1 */
-#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
+#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
#define IAC1 SPRN_IAC1 /* Instruction Address Register 1 */
#define IAC2 SPRN_IAC2 /* Instruction Address Register 2 */
#define IBAT0L SPRN_IBAT0L /* Instruction BAT 0 Lower Register */
@@ -511,13 +522,13 @@
#define IBAT5U SPRN_IBAT5U /* Instruction BAT 5 Upper Register */
#define IBAT6L SPRN_IBAT6L /* Instruction BAT 6 Lower Register */
#define IBAT6U SPRN_IBAT6U /* Instruction BAT 6 Upper Register */
-#define IBAT7L SPRN_IBAT7L /* Instruction BAT 7 Lower Register */
+#define IBAT7L SPRN_IBAT7L /* Instruction BAT 7 Lower Register */
#define IBAT7U SPRN_IBAT7U /* Instruction BAT 7 Lower Register */
#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
-#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
+#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
#define LDSTCR SPRN_LDSTCR /* Load/Store Control Register */
-#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
+#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
#define LR SPRN_LR
#define MBAR SPRN_MBAR /* System memory base address */
#if defined(CONFIG_MPC86xx)
@@ -529,7 +540,7 @@
#define SVR SPRN_SVR /* System-On-Chip Version Register */
#define PVR SPRN_PVR /* Processor Version */
#define RPA SPRN_RPA /* Required Physical Address Register */
-#define SDR1 SPRN_SDR1 /* MMU hash base register */
+#define SDR1 SPRN_SDR1 /* MMU hash base register */
#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
#define SPR1 SPRN_SPRG1
#define SPR2 SPRN_SPRG2
@@ -544,6 +555,8 @@
#define SPRG7 SPRN_SPRG7
#define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */
#define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */
+#define SRR2 SPRN_SRR2 /* Save and Restore Register 2 */
+#define SRR3 SPRN_SRR3 /* Save and Restore Register 3 */
#define SVR SPRN_SVR /* System Version Register */
#define TBRL SPRN_TBRL /* Time Base Read Lower Register */
#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
@@ -598,7 +611,7 @@
#define IVOR35 SPRN_IVOR35
#define MCSRR0 SPRN_MCSRR0
#define MCSRR1 SPRN_MCSRR1
-#define L1CSR0 SPRN_L1CSR0
+#define L1CSR0 SPRN_L1CSR0
#define L1CSR1 SPRN_L1CSR1
#define MCSR SPRN_MCSR
#define MMUCSR0 SPRN_MMUCSR0
@@ -607,7 +620,7 @@
#define PID1 SPRN_PID1
#define PID2 SPRN_PID2
#define MAS0 SPRN_MAS0
-#define MAS1 SPRN_MAS1
+#define MAS1 SPRN_MAS1
#define MAS2 SPRN_MAS2
#define MAS3 SPRN_MAS3
#define MAS4 SPRN_MAS4
@@ -619,7 +632,7 @@
#define DCRN_BEAR 0x090 /* Bus Error Address Register */
#define DCRN_BESR 0x091 /* Bus Error Syndrome Register */
-#define BESR_DSES 0x80000000 /* Data-Side Error Status */
+#define BESR_DSES 0x80000000 /* Data-Side Error Status */
#define BESR_DMES 0x40000000 /* DMA Error Status */
#define BESR_RWS 0x20000000 /* Read/Write Status */
#define BESR_ETMASK 0x1C000000 /* Error Type */
@@ -676,8 +689,8 @@
#define IOCR_E3LP 0x01000000
#define IOCR_E4TE 0x00800000
#define IOCR_E4LP 0x00400000
-#define IOCR_EDT 0x00080000
-#define IOCR_SOR 0x00040000
+#define IOCR_EDT 0x00080000
+#define IOCR_SOR 0x00040000
#define IOCR_EDO 0x00008000
#define IOCR_2XC 0x00004000
#define IOCR_ATC 0x00002000
@@ -802,7 +815,7 @@
#define PVR_823 PVR_821
#define PVR_850 PVR_821
#define PVR_860 PVR_821
-#define PVR_7400 0x000C0000
+#define PVR_7400 0x000C0000
#define PVR_8240 0x00810100
/*
diff --git a/include/ata.h b/include/ata.h
index 8584226..aa6e90d 100644
--- a/include/ata.h
+++ b/include/ata.h
@@ -83,6 +83,66 @@
#define ATA_DEVICE(x) ((x & 1)<<4)
#define ATA_LBA 0xE0
+enum {
+ ATA_MAX_DEVICES = 1, /* per bus/port */
+ ATA_MAX_PRD = 256, /* we could make these 256/256 */
+ ATA_SECT_SIZE = 256, /*256 words per sector */
+
+ /* bits in ATA command block registers */
+ ATA_HOB = (1 << 7), /* LBA48 selector */
+ ATA_NIEN = (1 << 1), /* disable-irq flag */
+ /*ATA_LBA = (1 << 6), */ /* LBA28 selector */
+ ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */
+ ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */
+ ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */
+ ATA_BUSY = (1 << 7), /* BSY status bit */
+ ATA_DRDY = (1 << 6), /* device ready */
+ ATA_DF = (1 << 5), /* device fault */
+ ATA_DRQ = (1 << 3), /* data request i/o */
+ ATA_ERR = (1 << 0), /* have an error */
+ ATA_SRST = (1 << 2), /* software reset */
+ ATA_ABORTED = (1 << 2), /* command aborted */
+ /* ATA command block registers */
+ ATA_REG_DATA = 0x00,
+ ATA_REG_ERR = 0x01,
+ ATA_REG_NSECT = 0x02,
+ ATA_REG_LBAL = 0x03,
+ ATA_REG_LBAM = 0x04,
+ ATA_REG_LBAH = 0x05,
+ ATA_REG_DEVICE = 0x06,
+ ATA_REG_STATUS = 0x07,
+ ATA_PCI_CTL_OFS = 0x02,
+ /* and their aliases */
+ ATA_REG_FEATURE = ATA_REG_ERR,
+ ATA_REG_CMD = ATA_REG_STATUS,
+ ATA_REG_BYTEL = ATA_REG_LBAM,
+ ATA_REG_BYTEH = ATA_REG_LBAH,
+ ATA_REG_DEVSEL = ATA_REG_DEVICE,
+ ATA_REG_IRQ = ATA_REG_NSECT,
+
+ /* SETFEATURES stuff */
+ SETFEATURES_XFER = 0x03,
+ XFER_UDMA_7 = 0x47,
+ XFER_UDMA_6 = 0x46,
+ XFER_UDMA_5 = 0x45,
+ XFER_UDMA_4 = 0x44,
+ XFER_UDMA_3 = 0x43,
+ XFER_UDMA_2 = 0x42,
+ XFER_UDMA_1 = 0x41,
+ XFER_UDMA_0 = 0x40,
+ XFER_MW_DMA_2 = 0x22,
+ XFER_MW_DMA_1 = 0x21,
+ XFER_MW_DMA_0 = 0x20,
+ XFER_PIO_4 = 0x0C,
+ XFER_PIO_3 = 0x0B,
+ XFER_PIO_2 = 0x0A,
+ XFER_PIO_1 = 0x09,
+ XFER_PIO_0 = 0x08,
+ XFER_SW_DMA_2 = 0x12,
+ XFER_SW_DMA_1 = 0x11,
+ XFER_SW_DMA_0 = 0x10,
+ XFER_PIO_SLOW = 0x00
+};
/*
* ATA Commands (only mandatory commands listed here)
*/
diff --git a/include/common.h b/include/common.h
index 3c4b37b..d8b6b46 100644
--- a/include/common.h
+++ b/include/common.h
@@ -38,7 +38,7 @@
#include <linux/string.h>
#include <asm/ptrace.h>
#include <stdarg.h>
-#if defined(CONFIG_PCI) && defined(CONFIG_440)
+#if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
#include <pci.h>
#endif
#if defined(CONFIG_8xx)
@@ -248,10 +248,11 @@
void pci_init_board(void);
void pciinfo (int, int);
-#if defined(CONFIG_PCI) && defined(CONFIG_440)
-# if defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
int pci_pre_init (struct pci_controller * );
-# endif
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_440)
# if defined(CFG_PCI_TARGET_INIT)
void pci_target_init (struct pci_controller *);
# endif
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 047e2f1..9acde1e 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -55,6 +55,10 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NET_MULTI 1
+#undef CONFIG_HAS_ETH1
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
CONFIG_BOOTP_DNS | \
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index d756f44..3fc99c5 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -37,6 +37,7 @@
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
#define CONFIG_CPCI405 1 /* ...on a CPCI405 board */
#define CONFIG_CPCI405_VER2 1 /* ...version 2 */
+#undef CONFIG_CPCI405_6U /* enable this for 6U boards */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
@@ -56,6 +57,10 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NET_MULTI 1
+#undef CONFIG_HAS_ETH1
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 852d94a..4e2e1a8 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -57,6 +57,10 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NET_MULTI 1
+#undef CONFIG_HAS_ETH1
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 2260327..ab302df 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -56,6 +56,10 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NET_MULTI 1
+#undef CONFIG_HAS_ETH1
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
index 90d3a8d..7b5f728 100644
--- a/include/configs/CPCI440.h
+++ b/include/configs/CPCI440.h
@@ -33,6 +33,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_CPCI440 1 /* Board is ebony */
#define CONFIG_440GP 1 /* Specifc GP support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index ccd1f19..7fa9ed2 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -49,6 +49,7 @@
/* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */
#define CONFIG_SYSTEMACE 1
#define CFG_SYSTEMACE_BASE 0xf0000000
+#define CFG_SYSTEMACE_WIDTH 8
#define CONFIG_DOS_PARTITION 1
/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 2ad6f06..48b94ee 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -38,6 +38,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */
#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
@@ -262,7 +263,6 @@
#define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE)
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/
#define CFG_PCI_TARGET_INIT /* let board init pci target*/
#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 465a4ec..7aae2bd 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -104,6 +104,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_METROBOX 1 /* Board is Metrobox */
#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
@@ -331,7 +332,6 @@
#define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE)
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/
#define CFG_PCI_TARGET_INIT /* let board init pci target*/
#define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 6976313..7e1005c 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -303,11 +303,11 @@
#endif
#define CONFIG_GMII 1 /* MII PHY management */
-#define CONFIG_MPC83XX_TSEC1 1
+#define CONFIG_TSEC1 1
-#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC83XX_TSEC2 1
-#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 0x1c
#define TSEC2_PHY_ADDR 4
#define TSEC1_PHYIDX 0
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 0460be9..20c6d5a 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -432,10 +432,10 @@
#endif
#define CONFIG_GMII 1 /* MII PHY management */
-#define CONFIG_MPC83XX_TSEC1 1
-#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC83XX_TSEC2 1
-#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 906339e..834934d 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -374,18 +374,18 @@
#define CONFIG_MII
#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */
-#define CONFIG_MPC83XX_TSEC1
+#define CONFIG_TSEC1
-#ifdef CONFIG_MPC83XX_TSEC1
-#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
+#ifdef CONFIG_TSEC1
+#define CONFIG_TSEC1_NAME "TSEC0"
#define CFG_TSEC1_OFFSET 0x24000
#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */
#define TSEC1_PHYIDX 0
#endif
-#ifdef CONFIG_MPC83XX_TSEC2
+#ifdef CONFIG_TSEC2
#define CONFIG_HAS_ETH1
-#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC2_NAME "TSEC1"
#define CFG_TSEC2_OFFSET 0x25000
#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */
#define TSEC2_PHY_ADDR 4
@@ -628,11 +628,11 @@
*/
#define CONFIG_ENV_OVERWRITE
-#ifdef CONFIG_MPC83XX_TSEC1
+#ifdef CONFIG_TSEC1
#define CONFIG_ETHADDR 00:E0:0C:00:8C:01
#endif
-#ifdef CONFIG_MPC83XX_TSEC2
+#ifdef CONFIG_TSEC2
#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02
#endif
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 5aeea58..9176be3 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -366,10 +366,10 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 418a3a3..b568cb4 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -212,10 +212,10 @@
#elif defined(CONFIG_TSEC_ENET)
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#define CONFIG_MPC85XX_FEC 1
#define CONFIG_MPC85XX_FEC_NAME "FEC"
#define TSEC1_PHY_ADDR 7
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index fb360d2..e047e25 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -373,10 +373,10 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 4c34308..7cd62e9 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -359,10 +359,10 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC1"
-#define CONFIG_MPC85XX_TSEC3 1
-#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC3"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 680009d..a0d291e 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -391,14 +391,14 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1"
-#define CONFIG_MPC85XX_TSEC3 1
-#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC2"
-#undef CONFIG_MPC85XX_TSEC4
-#define CONFIG_MPC85XX_TSEC4_NAME "eTSEC3"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC2"
+#undef CONFIG_TSEC4
+#define CONFIG_TSEC4_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 4c8b4e7..b7e703c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -373,10 +373,10 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 21e6637..043397f 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -356,10 +356,10 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 3f65644..0ff0416 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -353,12 +353,12 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1"
-#undef CONFIG_MPC85XX_TSEC3
-#undef CONFIG_MPC85XX_TSEC4
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#undef CONFIG_TSEC3
+#undef CONFIG_TSEC4
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 2
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 41daa2b..12af24f 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -359,14 +359,14 @@
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC86XX_TSEC1 1
-#define CONFIG_MPC86XX_TSEC1_NAME "eTSEC1"
-#define CONFIG_MPC86XX_TSEC2 1
-#define CONFIG_MPC86XX_TSEC2_NAME "eTSEC2"
-#define CONFIG_MPC86XX_TSEC3 1
-#define CONFIG_MPC86XX_TSEC3_NAME "eTSEC3"
-#define CONFIG_MPC86XX_TSEC4 1
-#define CONFIG_MPC86XX_TSEC4_NAME "eTSEC4"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
+#define CONFIG_TSEC4 1
+#define CONFIG_TSEC4_NAME "eTSEC4"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index 4fb5440..8f130f5 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -262,10 +262,10 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 87ab934..0286b53 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -258,10 +258,10 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#undef CONFIG_MPC85XX_FEC
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 7935593..aa3627b 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -44,7 +44,7 @@
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
@@ -234,15 +234,21 @@
#ifndef CONFIG_CAM5200
#define CUSTOM_ENV_SETTINGS \
"bootfile=/tftpboot/tqm5200/uImage\0" \
+ "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0" \
+ "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \
"u-boot=/tftpboot/tqm5200/u-boot.bin\0"
#else
-#define CUSTOM_ENV_SETTINGS \
+#define CUSTOM_ENV_SETTINGS \
"bootfile=cam5200/uImage\0" \
"u-boot=cam5200/u-boot.bin\0" \
"setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=ttyS0\0" \
+ "kernel_addr=200000\0" \
+ "fdt_addr=400000\0" \
+ "hostname=tqm5200\0" \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -252,13 +258,17 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addcons=setenv bootargs ${bootargs} " \
- "console=ttyS0,${baudrate}\0" \
+ "console=${console},${baudrate}\0" \
"flash_self=run ramargs addip addcons;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \
- "bootm\0" \
+ "net_nfs=tftp ${kernel_addr} ${bootfile};" \
+ "run nfsargs addip addcons;bootm\0" \
+ "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};" \
+ "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;" \
+ "run nfsargs addip addcons;" \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
CUSTOM_ENV_SETTINGS \
"load=tftp 200000 ${u-boot}\0" \
ENV_UPDT \
@@ -676,4 +686,18 @@
/* Interval between registers */
#define CFG_ATA_STRIDE 4
+/*-----------------------------------------------------------------------
+ * Open firmware flat tree support
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index ed03577..4a5f8b6 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -248,10 +248,10 @@
#define CONFIG_NET_MULTI
#endif
-#define CONFIG_MPC83XX_TSEC1 1
-#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC83XX_TSEC2 1
-#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 2
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index f45f3a2..b0b9dd3 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -258,10 +258,10 @@
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 2
#define TSEC2_PHY_ADDR 1
#define TSEC1_PHYIDX 0
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 9b32514..f2ad097 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -238,7 +238,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 0f447b0..517d130 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -75,7 +75,7 @@
#define CFG_TEMP_STACK_OCM 1 /* OCM as init ram */
/* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_ADDR 0xf8000000
#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */
#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
@@ -159,7 +159,7 @@
*/
#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
-#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (12 << 10)) /* Copy SPL here*/
+#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/
#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 67f62d3..df057d9 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -29,6 +29,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_ALPR 1 /* Board is ebony */
#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */
@@ -94,7 +95,7 @@
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
@@ -256,7 +257,7 @@
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */
-#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
@@ -274,7 +275,6 @@
#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CFG_PCI_MASTER_INIT
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 763d1c7..d58344d 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -32,6 +32,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_BAMBOO 1 /* Board is BAMBOO */
#define CONFIG_440EP 1 /* Specific PPC440EP support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
@@ -73,9 +74,9 @@
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
-#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
+#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (4 << 10)
-#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
@@ -114,8 +115,8 @@
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS 3 /* number of banks */
-#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+#define CFG_MAX_FLASH_BANKS 3 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
@@ -125,11 +126,11 @@
#define CFG_FLASH_ADDR1 0x2aa
#define CFG_FLASH_WORD_SIZE unsigned char
-#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */
-#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */
+#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */
+#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
@@ -388,7 +389,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index a42319b..4a1385c 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -32,6 +32,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_EBONY 1 /* Board is ebony */
#define CONFIG_440GP 1 /* Specifc GP support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
@@ -121,7 +122,7 @@
#define CFG_FLASH_WORD_SIZE unsigned char
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
@@ -269,7 +270,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index cc47a16..a7eda07 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -314,7 +314,6 @@
#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#undef CFG_PCI_MASTER_INIT
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 045a144..cbb59c5 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -273,7 +273,6 @@
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#undef CFG_PCI_MASTER_INIT
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
new file mode 100644
index 0000000..1d87c73
--- /dev/null
+++ b/include/configs/lwmon5.h
@@ -0,0 +1,449 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * lwmon5.h - configuration for lwmon5 board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_LWMON5 1 /* Board is lwmon5 */
+#define CONFIG_440EPX 1 /* Specific PPC440EPx */
+#define CONFIG_440 1 /* ... PPC440 family */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */
+
+#define CFG_BOOT_BASE_ADDR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_LIME_BASE_0 0xc0000000
+#define CFG_LIME_BASE_1 0xc1000000
+#define CFG_LIME_BASE_2 0xc2000000
+#define CFG_LIME_BASE_3 0xc3000000
+#define CFG_FPGA_BASE_0 0xc4000000
+#define CFG_FPGA_BASE_1 0xc4200000
+#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+
+#define CFG_USB2D0_BASE 0xe0000100
+#define CFG_USB_DEVICE 0xe0000000
+#define CFG_USB_HOST 0xe0000400
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
+#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
+#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+
+#define CFG_INIT_RAM_END (4 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* no external clock provided */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
+/* define this if you want console on UART1 */
+#define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM (256) /* 256MB */
+#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
+#define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */
+#if 0 /* test-only: disable ECC for now */
+#define CONFIG_DDR_ECC 1 /* enable ECC */
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */
+#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hostname=lwmon5\0" \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xxFP\0" \
+ "bootfile=/tftpboot/lwmon5/uImage\0" \
+ "kernel_addr=FC000000\0" \
+ "ramdisk_addr=FC180000\0" \
+ "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
+ "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \
+ "cp.b 200000 FFF80000 80000\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY1_ADDR 1
+
+/* USB */
+#ifdef CONFIG_440EPX
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+#define CMD_USB CFG_CMD_USB
+#else
+#define CMD_USB 0 /* no USB on 440GRx */
+#endif /* CONFIG_440EPX */
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CMD_USB)
+
+#define CONFIG_SUPPORT_VFAT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x03050200
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xdc000)
+
+/* Memory Bank 1 (Lime) initialization */
+#define CFG_EBC_PB1AP 0x01004380
+#define CFG_EBC_PB1CR (CFG_LIME_BASE_0 | 0xdc000)
+
+/* Memory Bank 2 (FPGA) initialization */
+#define CFG_EBC_PB2AP 0x01004400
+#define CFG_EBC_PB2CR (CFG_FPGA_BASE_0 | 0x1c000)
+
+/* Memory Bank 3 (FPGA2) initialization */
+#define CFG_EBC_PB3AP 0x01004400
+#define CFG_EBC_PB3CR (CFG_FPGA_BASE_1 | 0x1c000)
+
+#define CFG_EBC_CFG 0xb8400000
+
+/*-----------------------------------------------------------------------
+ * Graphics (Fujitsu Lime)
+ *----------------------------------------------------------------------*/
+/* SDRAM Clock frequency adjustment register */
+#define CFG_LIME_SDRAM_CLOCK 0xC1FC0000
+/* Lime Clock frequency is to set 133MHz */
+#define CFG_LIME_CLOCK_133MHZ 0x10000
+
+/* SDRAM Parameter register */
+#define CFG_LIME_MMR 0xC1FCFFFC
+/* SDRAM parameter value */
+#define CFG_LIME_MMR_VALUE 0x414FB7F2
+
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *----------------------------------------------------------------------*/
+#define CFG_GPIO_PHY1_RST 12
+#define CFG_GPIO_FLASH_WP 14
+#define CFG_GPIO_PHY0_RST 22
+#define CFG_GPIO_WATCHDOG 58
+#define CFG_GPIO_LIME_S 59
+#define CFG_GPIO_LIME_RST 60
+
+/*-----------------------------------------------------------------------
+ * PPC440 GPIO Configuration
+ */
+#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
+{ \
+/* GPIO Core 0 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
+}, \
+{ \
+/* GPIO Core 1 */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO58 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
+} \
+}
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index fe4e638..68e8cec 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -41,6 +41,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_OCOTEA 1 /* Board is ebony */
#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
@@ -136,7 +137,7 @@
#define CFG_FLASH_WORD_SIZE unsigned char
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
@@ -293,7 +294,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index aa0901f..22f9f84 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -35,6 +35,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_P3P440 1 /* Board is P3P440 */
#define CONFIG_440GP 1 /* Specifc GP support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
@@ -226,7 +227,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CONFIG_DISABLE_PISE_TEST /* disable PISE test (PCIX only)*/
@@ -285,7 +285,7 @@
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 23bdfc8..69d97d6 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -32,6 +32,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_PCS440EP 1 /* Board is PCS440EP */
#define CONFIG_440EP 1 /* Specific PPC440EP support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
@@ -103,21 +104,28 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+#define CONFIG_ENV_OVERWRITE 1
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#endif /* CFG_ENV_IS_IN_FLASH */
+#define ENV_NAME_REVLEV "revision_level"
+#define ENV_NAME_SOLDER "solder_switch"
+#define ENV_NAME_DIP "dip"
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
#undef CONFIG_DDR_ECC /* don't use ECC */
#define SPD_EEPROM_ADDRESS {0x50}
+#define CONFIG_PROG_SDRAM_TLB 1
/*-----------------------------------------------------------------------
* I2C
@@ -142,6 +150,8 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=pcs440ep\0" \
+ "use_eeprom_ethaddr=default\0" \
+ "cs_test=off\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -172,6 +182,36 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+/* check U-Boot image with SHA1 sum */
+#define CONFIG_SHA1_CHECK_UB_IMG 1
+#define CONFIG_SHA1_START CFG_MONITOR_BASE
+#define CONFIG_SHA1_LEN CFG_MONITOR_LEN
+
+/*-----------------------------------------------------------------------
+ * Definitions for status LED
+ */
+#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED 1
+
+#define STATUS_LED_BIT 0x08 /* LED 1 is on GPIO_PPC_1 */
+#define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+#define STATUS_LED_STATE STATUS_LED_OFF
+#define STATUS_LED_BIT1 0x04 /* LED 2 is on GPIO_PPC_2 */
+#define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+#define STATUS_LED_STATE1 STATUS_LED_ON
+#define STATUS_LED_BIT2 0x02 /* LED 3 is on GPIO_PPC_3 */
+#define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+#define STATUS_LED_STATE2 STATUS_LED_OFF
+#define STATUS_LED_BIT3 0x01 /* LED 4 is on GPIO_PPC_4 */
+#define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */
+#define STATUS_LED_STATE3 STATUS_LED_OFF
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -213,7 +253,10 @@
CFG_CMD_DIAG | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
+ CFG_CMD_FAT | \
CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
CFG_CMD_NET | \
@@ -221,9 +264,8 @@
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
+ CFG_CMD_REISER | \
CFG_CMD_SDRAM | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
CFG_CMD_USB )
@@ -266,7 +308,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
@@ -315,76 +356,76 @@
/*-----------------------------------------------------------------------
* PPC440 GPIO Configuration
*/
-#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \
+#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
{ \
/* GPIO Core 0 */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6 EBC_CS_N(1) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7 EBC_CS_N(2) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8 EBC_CS_N(3) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9 EBC_CS_N(4) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO10 EBC_CS_N(5) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO11 EBC_BUS_ERR */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO12 ZII_p0Rxd(0) */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO13 ZII_p0Rxd(1) */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO14 ZII_p0Rxd(2) */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO15 ZII_p0Rxd(3) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16 ZII_p0Txd(0) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17 ZII_p0Txd(1) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18 ZII_p0Txd(2) */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19 ZII_p0Txd(3) */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO20 ZII_p0Rx_er */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO21 ZII_p0Rx_dv */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO22 ZII_p0RxCrs */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23 ZII_p0Tx_er */ \
-{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24 ZII_p0Tx_en */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO25 ZII_p0Col */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO26 USB2D_RXVALID */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO28 USB2D_TXVALID */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
-{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
-{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO6 EBC_CS_N(1) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO7 EBC_CS_N(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO8 EBC_CS_N(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO9 EBC_CS_N(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO10 EBC_CS_N(5) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO11 EBC_BUS_ERR */ \
+{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO12 ZII_p0Rxd(0) */ \
+{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO13 ZII_p0Rxd(1) */ \
+{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO14 ZII_p0Rxd(2) */ \
+{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO15 ZII_p0Rxd(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO16 ZII_p0Txd(0) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO17 ZII_p0Txd(1) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO18 ZII_p0Txd(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO19 ZII_p0Txd(3) */ \
+{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO20 ZII_p0Rx_er */ \
+{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO21 ZII_p0Rx_dv */ \
+{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO22 ZII_p0RxCrs */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO23 ZII_p0Tx_er */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO24 ZII_p0Tx_en */ \
+{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO25 ZII_p0Col */ \
+{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO26 USB2D_RXVALID */ \
+{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
+{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO28 USB2D_TXVALID */ \
+{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
+{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
+{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
}, \
{ \
/* GPIO Core 1 */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO32 USB2D_OPMODE0 */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO33 USB2D_OPMODE1 */ \
-{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
-{ GPIO1_BASE, GPIO_IN, GPIO_ALT3 }, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
-{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \
-{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37 UART0_RTS_N */ \
-{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_ALT2 }, /* GPIO39 UART0_RI_N UART1_SIN */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO40 UIC_IRQ(0) */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO41 UIC_IRQ(1) */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO42 UIC_IRQ(2) */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO43 UIC_IRQ(3) */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
-{ GPIO1_BASE, GPIO_BI, GPIO_SEL }, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO49 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO50 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO51 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO52 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO53 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO54 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO55 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO56 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO57 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO58 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO59 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO60 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO61 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO62 Unselect via TraceSelect Bit */ \
-{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO63 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO32 USB2D_OPMODE0 */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO33 USB2D_OPMODE1 */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_NO_CHG}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN, GPIO_ALT3, GPIO_OUT_NO_CHG}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO37 UART0_RTS_N */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_NO_CHG}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
+{GPIO1_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_NO_CHG}, /* GPIO39 UART0_RI_N UART1_SIN */ \
+{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO40 UIC_IRQ(0) */ \
+{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO41 UIC_IRQ(1) */ \
+{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO42 UIC_IRQ(2) */ \
+{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO43 UIC_IRQ(3) */ \
+{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
+{GPIO1_BASE, GPIO_BI, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO49 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO50 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO51 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO52 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO54 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO55 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO56 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO57 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO58 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO59 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO60 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO61 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO62 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO63 Unselect via TraceSelect Bit */ \
} \
}
@@ -410,4 +451,39 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */
+
+#define CONFIG_IDE_PREINIT 1
+#define CONFIG_IDE_RESET 1
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_CF1
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET 0
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x0000)
+
+/* These addresses need to be shifted one place to the left
+ * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
+ * These values are shifted
+ */
+#define CFG_ATA_PORT_ADDR(port) ((port) << 1)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 65aac5c..e6e3866 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -401,10 +401,10 @@
#define CONFIG_NET_MULTI 1
#endif
-#define CONFIG_MPC83XX_TSEC1 1
-#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC83XX_TSEC2 1
-#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#define CONFIG_PHY_BCM5421S 1
#define TSEC1_PHY_ADDR 0x19
#define TSEC2_PHY_ADDR 0x1a
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index d7d07a6..8b2ec07 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -182,6 +182,15 @@
#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */
/************************************************************
+*SATA/Native Stuff
+************************************************************/
+#define CFG_SATA_SUPPORTED 1
+#define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */
+#define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */
+#define CFG_SATA_MAXDEVICES (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
+#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */
+
+/************************************************************
* ATAPI support (experimental)
************************************************************/
#define CONFIG_ATAPI /* enable ATAPI Support */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 23243a4..3219992 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -37,6 +37,7 @@
#else
#define CONFIG_440GRX 1 /* Specific PPC440GRx */
#endif
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
/* Detect Sequoia PLL input clock automatically via CPLD bit */
#define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
@@ -58,6 +59,7 @@
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */
#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_OCM_DATA_ADDR CFG_OCM_BASE
#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
@@ -80,7 +82,7 @@
#define CFG_INIT_RAM_END (4 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
/*-----------------------------------------------------------------------
* Serial Port
@@ -125,7 +127,7 @@
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
@@ -327,6 +329,22 @@
CFG_CMD_SDRAM | \
CMD_USB)
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_UART | \
+ CFG_POST_I2C | \
+ CFG_POST_CACHE | \
+ CFG_POST_FPU | \
+ CFG_POST_ETHER | \
+ CFG_POST_SPR)
+
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
#define CONFIG_SUPPORT_VFAT
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -370,7 +388,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 625cf20..21065b9 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -230,10 +230,10 @@
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
#undef CONFIG_MPS85XX_FEC
#define TSEC1_PHY_ADDR 2
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 1978a32..2e527b2 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -42,20 +42,20 @@
#define CONFIG_CPM2 1 /* has CPM2 */
#define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/
-#undef CONFIG_PCI /* pci ethernet support */
-#define CONFIG_TSEC_ENET /* tsec ethernet support*/
-#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
+#define CONFIG_PCI /* PCI ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support*/
+#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#undef CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
/* sysclk for MPC85xx
*/
-#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
+#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
/* Blinkin' LEDs for Robert :-)
*/
@@ -64,23 +64,23 @@
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#define CONFIG_BTB /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#undef CFG_DRAM_TEST /* memory test, takes time */
-#define CFG_MEMTEST_START 0x00200000 /* memtest region */
-#define CFG_MEMTEST_END 0x00400000
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest region */
+#define CFG_MEMTEST_END 0x00400000
-/* Localbus connector. There are many options that can be
+/* Localbus connector. There are many options that can be
* connected here, including sdram or lots of flash.
* This address, however, is used to configure a 256M local bus
* window that includes the Config latch below.
*/
-#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */
+#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */
#define CFG_LBC_OPTION_SIZE 256 /* 256MB */
/* There are various flash options used, we configure for the largest,
@@ -88,16 +88,16 @@
* sizes.
*/
#ifdef CONFIG_STXSSA_4M
-#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */
+#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */
#else
-#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */
+#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */
#endif
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */
#define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7)
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
-#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
+#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
@@ -110,22 +110,22 @@
*/
#define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */
#define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */
-#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */
+#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#else
-#undef CFG_RAMBOOT
+#undef CFG_RAMBOOT
#endif
#ifdef CFG_RAMBOOT
-#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
+#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
#else
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#endif
-#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
@@ -140,14 +140,14 @@
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
-#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */
+#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */
#undef CONFIG_CLOCKS_IN_MHZ
/* local bus definitions */
-#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
+#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
#define CFG_OR2_PRELIM 0xfc006901
-#define CFG_LBC_LCRR 0x00030004 /* local bus freq */
+#define CFG_LBC_LCRR 0x00030004 /* local bus freq */
#define CFG_LBC_LBCR 0x00000000
#define CFG_LBC_LSRT 0x20000000
#define CFG_LBC_MRTPR 0x20000000
@@ -158,52 +158,52 @@
#define CFG_LBC_LSDMR_5 0x4061b723
#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 1
-#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/* Serial Port */
#define CONFIG_CONS_INDEX 2
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK get_bus_freq(0)
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
-#ifdef CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* I2C */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#if 0
-#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */
#else
/* I did the 'if 0' so we could keep the syntax above if ever needed. */
#undef CFG_I2C_NOPROBES
#endif
#define CFG_I2C_OFFSET 0x3000
-/* I2C EEPROM. AT24C32, we keep our environment in here.
+/* I2C EEPROM. AT24C32, we keep our environment in here.
*/
#define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */
#define CFG_I2C_EEPROM_ADDR_LEN 2
@@ -232,35 +232,35 @@
#if defined(CONFIG_PCI) /* PCI Ethernet card */
#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
+#define CONFIG_EEPRO100
+#define CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
- #define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #define PCI_ENET0_IOADDR 0xe0000000
+ #define PCI_ENET0_MEMADDR 0xe0000000
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
#endif
-#undef CONFIG_PCI_SCAN_SHOW
-#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+#define CONFIG_PCI_SCAN_SHOW
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1 1
-#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
-#define CONFIG_MPC85XX_TSEC2 1
-#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
-#undef CONFIG_MPS85XX_FEC
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
+#define CONFIG_MPS85XX_FEC
#define TSEC1_PHY_ADDR 2
#define TSEC2_PHY_ADDR 4
@@ -270,9 +270,9 @@
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
-#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
+#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */
+#undef CONFIG_ETHER_NONE /* define if ether on something else */
+#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
#if (CONFIG_ETHER_INDEX == 2)
/*
@@ -281,19 +281,19 @@
* - Select bus for bd/buffers
* - Full duplex
*/
- #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
- #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
- #define CFG_CPMFCR_RAMTYPE 0
+ #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+ #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+ #define CFG_CPMFCR_RAMTYPE 0
#if 0
- #define CFG_FCC_PSMR (FCC_PSMR_FDE)
+ #define CFG_FCC_PSMR (FCC_PSMR_FDE)
#else
- #define CFG_FCC_PSMR 0
+ #define CFG_FCC_PSMR 0
#endif
#define FETH2_RST 0x01
#elif (CONFIG_ETHER_INDEX == 3)
/* need more definitions here for FE3 */
#define FETH3_RST 0x80
-#endif /* CONFIG_ETHER_INDEX */
+#endif /* CONFIG_ETHER_INDEX */
/* MDIO is done through the TSEC0 control.
*/
@@ -415,13 +415,13 @@
*/
#ifdef CFG_ENV_IS_IN_EEPROM /* use restricted "standard" environment */
-#define CONFIG_BAUDRATE 38400
+#define CONFIG_BAUDRATE 38400
#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
#define CONFIG_BOOTCOMMAND "bootm 0xffc00000 0xffd00000"
#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
#define CONFIG_SERVERIP 192.168.85.1
-#define CONFIG_IPADDR 192.168.85.60
+#define CONFIG_IPADDR 192.168.85.60
#define CONFIG_GATEWAYIP 192.168.85.1
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_HOSTNAME STX_SSA
@@ -431,7 +431,7 @@
#else /* ENV IS IN FLASH -- use a full-blown envionment */
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index 2b28f93..d756be7 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -30,6 +30,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_TAISHAN 1 /* Board is taishan */
#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
@@ -217,8 +218,8 @@
#define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_NET_MULTI 1
-#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
-#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
+#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
+#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
#define CONFIG_PHY2_ADDR 0x1
#define CONFIG_PHY3_ADDR 0x3
#define CONFIG_ET1011C_PHY 1
@@ -297,7 +298,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index b68ae54..3b106ef 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -38,6 +38,7 @@
#define CONFIG_440GR 1 /* Specific PPC440GR support */
#define CONFIG_HOSTNAME yellowstone
#endif
+#define CONFIG_440 1 /* ... PPC440 family */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
@@ -122,7 +123,7 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
@@ -311,7 +312,6 @@
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 7f8b022..1fdcc4b 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -289,7 +289,6 @@
#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
#undef CFG_PCI_MASTER_INIT
diff --git a/include/logbuff.h b/include/logbuff.h
index 3acfc18..d415729 100644
--- a/include/logbuff.h
+++ b/include/logbuff.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2007
* Detlev Zundel, dzu@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -25,6 +25,7 @@
#ifdef CONFIG_LOGBUFFER
+#define LOGBUFF_MAGIC 0xc0de4ced /* Forced by code, eh! */
#define LOGBUFF_LEN (16384) /* Must be 16k right now */
#define LOGBUFF_MASK (LOGBUFF_LEN-1)
#define LOGBUFF_OVERHEAD (4096) /* Logbuffer overhead for extra info */
@@ -32,6 +33,29 @@
#define LOGBUFF_INITIALIZED (1<<31)
+/* The mapping used here has to be the same as in setup_ext_logbuff ()
+ in linux/kernel/printk */
+
+typedef struct {
+ union {
+ struct {
+ unsigned long tag;
+ unsigned long start;
+ unsigned long con;
+ unsigned long end;
+ unsigned long chars;
+ } v2;
+ struct {
+ unsigned long dummy;
+ unsigned long tag;
+ unsigned long start;
+ unsigned long size;
+ unsigned long chars;
+ } v1;
+ };
+ unsigned char buf[0];
+} logbuff_t;
+
int drv_logbuff_init (void);
void logbuff_init_ptrs (void);
void logbuff_log(char *msg);
diff --git a/include/mpc5xx.h b/include/mpc5xx.h
index 7508f6d..414651f 100644
--- a/include/mpc5xx.h
+++ b/include/mpc5xx.h
@@ -36,6 +36,7 @@
* Exception offsets (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
+#define _START_OFFSET EXC_OFF_SYS_RESET
/*-----------------------------------------------------------------------
* ISB bit in IMMR to set internal memory map
@@ -75,10 +76,10 @@
#define SIUMCR_DBPC01 0x00080000 /* - " - */
#define SIUMCR_DBPC10 0x00100000 /* - " - */
#define SIUMCR_DBPC11 0x00180000 /* - " - */
-#define SIUMCR_GPC00 0x00000000 /* General Pins Config */
-#define SIUMCR_GPC01 0x00020000 /* General Pins Config */
-#define SIUMCR_GPC10 0x00040000 /* General Pins Config */
-#define SIUMCR_GPC11 0x00060000 /* General Pins Config */
+#define SIUMCR_GPC00 0x00000000 /* General Pins Config */
+#define SIUMCR_GPC01 0x00020000 /* General Pins Config */
+#define SIUMCR_GPC10 0x00040000 /* General Pins Config */
+#define SIUMCR_GPC11 0x00060000 /* General Pins Config */
#define SIUMCR_DLK 0x00010000 /* Debug Register Lock */
#define SIUMCR_SC00 0x00000000 /* Multi Chip 32 bit */
#define SIUMCR_SC01 0x00004000 /* Muilt Chip 16 bit */
@@ -89,7 +90,7 @@
#define SIUMCR_MLRC01 0x00000400 /* - " - */
#define SIUMCR_MLRC10 0x00000800 /* - " - */
#define SIUMCR_MLRC11 0x00000c00 /* - " - */
-#define SIUMCR_MTSC 0x00000100 /* Memory transfer */
+#define SIUMCR_MTSC 0x00000100 /* Memory transfer */
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control Register
@@ -122,13 +123,13 @@
* SCCR - System Clock and reset Control Register
*/
#define SCCR_DFNL_MSK 0x00000070 /* DFNL mask */
-#define SCCR_DFNH_MSK 0x00000007 /* DFNH mask */
+#define SCCR_DFNH_MSK 0x00000007 /* DFNH mask */
#define SCCR_DFNL_SHIFT 0x0000004 /* DFNL shift value */
#define SCCR_RTSEL 0x00100000 /* RTC circuit input source select */
#define SCCR_EBDF00 0x00000000 /* Division factor 1. CLKOUT is GCLK2 */
#define SCCR_EBDF11 0x00060000 /* reserved */
#define SCCR_TBS 0x02000000 /* Time Base Source */
-#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */
+#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */
#define SCCR_COM00 0x00000000 /* full strength CLKOUT output buffer */
#define SCCR_COM01 0x20000000 /* half strength CLKOUT output buffer */
#define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */
@@ -137,11 +138,11 @@
/*-----------------------------------------------------------------------
* MC - Memory Controller
*/
-#define BR_V 0x00000001 /* Bank valid */
-#define BR_BI 0x00000002 /* Burst inhibit */
-#define BR_PS_8 0x00000400 /* 8 bit port size */
-#define BR_PS_16 0x00000800 /* 16 bit port size */
-#define BR_PS_32 0x00000000 /* 32 bit port size */
+#define BR_V 0x00000001 /* Bank valid */
+#define BR_BI 0x00000002 /* Burst inhibit */
+#define BR_PS_8 0x00000400 /* 8 bit port size */
+#define BR_PS_16 0x00000800 /* 16 bit port size */
+#define BR_PS_32 0x00000000 /* 32 bit port size */
#define BR_LBDIR 0x00000008 /* Late burst data in progess */
#define BR_SETA 0x00000004 /* External Data Acknowledge */
#define OR_SCY_3 0x00000030 /* 3 clock cycles wait states */
@@ -158,8 +159,8 @@
/*-----------------------------------------------------------------------
* UMCR - UIMB Module Configuration Register
*/
-#define UMCR_FSPEED 0x00000000 /* Full speed. Opposit of UMCR_HSPEED */
-#define UMCR_HSPEED 0x10000000 /* Half speed */
+#define UMCR_FSPEED 0x00000000 /* Full speed. Opposit of UMCR_HSPEED */
+#define UMCR_HSPEED 0x10000000 /* Half speed */
/*-----------------------------------------------------------------------
* ICTRL - I-Bus Support Control Register
@@ -173,16 +174,16 @@
* SCI - Serial communication interface
*/
-#define SCI_TDRE 0x0100 /* Transmit data register empty */
-#define SCI_TE 0x0008 /* Transmitter enabled */
+#define SCI_TDRE 0x0100 /* Transmit data register empty */
+#define SCI_TE 0x0008 /* Transmitter enabled */
#define SCI_RE 0x0004 /* Receiver enabled */
-#define SCI_RDRF 0x0040 /* Receive data register full */
-#define SCI_PE 0x0400 /* Parity enable */
-#define SCI_SCXBR_MK 0x1fff /* Baudrate mask */
-#define SCI_SCXDR_MK 0x00ff /* Data register mask */
+#define SCI_RDRF 0x0040 /* Receive data register full */
+#define SCI_PE 0x0400 /* Parity enable */
+#define SCI_SCXBR_MK 0x1fff /* Baudrate mask */
+#define SCI_SCXDR_MK 0x00ff /* Data register mask */
#define SCI_M_11 0x0200 /* Frame size is 11 bit */
#define SCI_M_10 0x0000 /* Frame size is 10 bit */
-#define SCI_PORT_1 ((int)1) /* Place this later somewhere better */
+#define SCI_PORT_1 ((int)1) /* Place this later somewhere better */
#define SCI_PORT_2 ((int)2)
#endif /* __MPC5XX_H__ */
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 089aa13..a4581a3 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -39,6 +39,7 @@
/* Exception offsets (PowerPC standard) */
#define EXC_OFF_SYS_RESET 0x0100
+#define _START_OFFSET EXC_OFF_SYS_RESET
/* useful macros for manipulating CSx_START/STOP */
#if defined(CONFIG_MGT5100)
diff --git a/include/mpc8220.h b/include/mpc8220.h
index ff7acc6..d3b1457 100644
--- a/include/mpc8220.h
+++ b/include/mpc8220.h
@@ -35,6 +35,7 @@
/* Exception offsets (PowerPC standard) */
#define EXC_OFF_SYS_RESET 0x0100
+#define _START_OFFSET EXC_OFF_SYS_RESET
/* Internal memory map */
/* MPC8220 Internal Register MMAP */
diff --git a/include/mpc824x.h b/include/mpc824x.h
index 30fc795..30f01d5 100644
--- a/include/mpc824x.h
+++ b/include/mpc824x.h
@@ -88,7 +88,7 @@
#define PREP_PCI_MEMORY_BUS 0x80000000
#define PREP_PCI_MEMORY_SIZE 0x80000000
#define MPC107_PCI_CMD 0x80000004 /* MPC107 PCI cmd reg */
-#define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */
+#define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */
#define PROC_INT1_ADR 0x800000a8 /* MPC107 Processor i/f cfg1 */
#define PROC_INT2_ADR 0x800000ac /* MPC107 Processor i/f cfg2 */
#define MEM_CONT1_ADR 0x800000f0 /* MPC107 Memory control config. 1 */
@@ -98,8 +98,8 @@
#define MEM_ERREN1_ADR 0x800000c0 /* MPC107 Memory error enable 1 */
#define MEM_START1_ADR 0x80000080 /* MPC107 Memory starting addr */
#define MEM_START2_ADR 0x80000084 /* MPC107 Memory starting addr-lo */
-#define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/
-#define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/
+#define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/
+#define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/
#define MEM_END1_ADR 0x80000090 /* MPC107 Memory ending address */
#define MEM_END2_ADR 0x80000094 /* MPC107 Memory ending addr-lo */
#define XMEM_END1_ADR 0x80000098 /* MPC107 Extended mem. end addrs-hi */
@@ -142,6 +142,8 @@
#define EXC_OFF_JMDDI 0x1600 /* Java Mode denorm detect Interr -- WTF??*/
#define EXC_OFF_RMTE 0x2000 /* Run Mode or Trace Exception */
+#define _START_OFFSET EXC_OFF_SYS_RESET
+
#define MAP_A_CONFIG_ADDR_HIGH 0x8000 /* Upper half of CONFIG_ADDR for Map A */
#define MAP_A_CONFIG_ADDR_LOW 0x0CF8 /* Lower half of CONFIG_ADDR for Map A */
#define MAP_A_CONFIG_DATA_HIGH 0x8000 /* Upper half of CONFIG_DAT for Map A */
diff --git a/include/mpc8260.h b/include/mpc8260.h
index d9dd92d..0525294 100644
--- a/include/mpc8260.h
+++ b/include/mpc8260.h
@@ -53,7 +53,7 @@
* Exception offsets (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
-
+#define _START_OFFSET EXC_OFF_SYS_RESET
/*-----------------------------------------------------------------------
* BCR - Bus Configuration Register 4-25
@@ -664,7 +664,7 @@
#define PSDMR_CL_3 0x00000003 /* CAS Latency = 3 */
/*-----------------------------------------------------------------------
- * LSDMR - Local Bus SDRAM Mode Register 10-24
+ * LSDMR - Local Bus SDRAM Mode Register 10-24
*/
/*
@@ -707,23 +707,23 @@
/*-----------------------------------------------------------------------
* TMR1-TMR4 - Timer Mode Registers 17-6
*/
-#define TMRx_PS_MSK 0xff00 /* Prescaler Value */
+#define TMRx_PS_MSK 0xff00 /* Prescaler Value */
#define TMRx_CE_MSK 0x00c0 /* Capture Edge and Enable Interrupt*/
-#define TMRx_OM 0x0020 /* Output Mode */
+#define TMRx_OM 0x0020 /* Output Mode */
#define TMRx_ORI 0x0010 /* Output Reference Interrupt Enable*/
-#define TMRx_FRR 0x0008 /* Free Run/Restart */
+#define TMRx_FRR 0x0008 /* Free Run/Restart */
#define TMRx_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */
-#define TMRx_GE 0x0001 /* Gate Enable */
+#define TMRx_GE 0x0001 /* Gate Enable */
#define TMRx_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event*/
#define TMRx_CE_RISING 0x0040 /* Capture on Rising TINx edge only */
#define TMRx_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */
-#define TMRx_CE_ANY 0x00c0 /* Capture on any TINx edge */
+#define TMRx_CE_ANY 0x00c0 /* Capture on any TINx edge */
-#define TMRx_ICLK_IN_CAS 0x0000 /* Internally cascaded input */
+#define TMRx_ICLK_IN_CAS 0x0000 /* Internally cascaded input */
#define TMRx_ICLK_IN_GEN 0x0002 /* Internal General system clock*/
#define TMRx_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16*/
-#define TMRx_ICLK_TIN_PIN 0x0006 /* TINx pin */
+#define TMRx_ICLK_TIN_PIN 0x0006 /* TINx pin */
/*-----------------------------------------------------------------------
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 60fc214..336c0ac 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -25,6 +25,7 @@
/* System reset offset (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100
+#define _START_OFFSET EXC_OFF_SYS_RESET
/* IMMRBAR - Internal Memory Register Base Address
*/
@@ -438,9 +439,9 @@
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
#if defined(CONFIG_MPC831X)
-#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000
+#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000
#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000
-#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
+#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
#define HRCWH_ROM_LOC_NAND_LP_16BIT 0x00600000
#define HRCWH_RL_EXT_LEGACY 0x00000000
@@ -1217,7 +1218,7 @@
#define FCR_CMD1 0x00FF0000
#define FCR_CMD1_SHIFT 16
#define FCR_CMD2 0x0000FF00
-#define FCR_CMD2_SHIFT 8
+#define FCR_CMD2_SHIFT 8
#define FCR_CMD3 0x000000FF
#define FCR_CMD3_SHIFT 0
@@ -1241,8 +1242,8 @@
/* LTESR - Transfer Error Status Register
*/
#define LTESR_BM 0x80000000
-#define LTESR_FCT 0x40000000
-#define LTESR_PAR 0x20000000
+#define LTESR_FCT 0x40000000
+#define LTESR_PAR 0x20000000
#define LTESR_WP 0x04000000
#define LTESR_ATMW 0x00800000
#define LTESR_ATMR 0x00400000
diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index a4d99b2..6fbd504 100644
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -8,6 +8,7 @@
#define __MPC85xx_H__
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
+#define _START_OFFSET EXC_OFF_SYS_RESET
#if defined(CONFIG_E500)
#include <e500.h>
diff --git a/include/mpc86xx.h b/include/mpc86xx.h
index 673bfed..9fd349a 100644
--- a/include/mpc86xx.h
+++ b/include/mpc86xx.h
@@ -8,7 +8,7 @@
#define __MPC86xx_H__
#define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */
-
+#define _START_OFFSET EXC_OFF_SYS_RESET
/*
* platform register addresses
diff --git a/include/mpc8xx.h b/include/mpc8xx.h
index 2911758..bef748f 100644
--- a/include/mpc8xx.h
+++ b/include/mpc8xx.h
@@ -35,7 +35,7 @@
* Exception offsets (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
-
+#define _START_OFFSET EXC_OFF_SYS_RESET
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control Register 11-9
@@ -208,12 +208,12 @@
#define SCCR_DFBRG10 0x00001000 /* BRGCLK division by 16 */
#define SCCR_DFBRG11 0x00001800 /* BRGCLK division by 64 */
#define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */
-#define SCCR_DFNL001 0x00000100 /* Division by 4 */
-#define SCCR_DFNL010 0x00000200 /* Division by 8 */
-#define SCCR_DFNL011 0x00000300 /* Division by 16 */
-#define SCCR_DFNL100 0x00000400 /* Division by 32 */
-#define SCCR_DFNL101 0x00000500 /* Division by 64 */
-#define SCCR_DFNL110 0x00000600 /* Division by 128 */
+#define SCCR_DFNL001 0x00000100 /* Division by 4 */
+#define SCCR_DFNL010 0x00000200 /* Division by 8 */
+#define SCCR_DFNL011 0x00000300 /* Division by 16 */
+#define SCCR_DFNL100 0x00000400 /* Division by 32 */
+#define SCCR_DFNL101 0x00000500 /* Division by 64 */
+#define SCCR_DFNL110 0x00000600 /* Division by 128 */
#define SCCR_DFNL111 0x00000700 /* Division by 256 (maximum) */
#define SCCR_DFNH000 0x00000000 /* Division by 1 (default = minimum) */
#define SCCR_DFNH110 0x000000D0 /* Division by 64 (maximum) */
diff --git a/include/post.h b/include/post.h
index cdefbdd..8259e5d 100644
--- a/include/post.h
+++ b/include/post.h
@@ -91,6 +91,7 @@
#define CFG_POST_SYSMON 0x00000800
#define CFG_POST_DSP 0x00001000
#define CFG_POST_CODEC 0x00002000
+#define CFG_POST_FPU 0x00004000
#endif /* CONFIG_POST */
diff --git a/include/ppc405.h b/include/ppc405.h
index 71ad12e..8e64731 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -27,6 +27,15 @@
/*--------------------------------------------------------------------- */
#define srr2 0x3de /* save/restore register 2 */
#define srr3 0x3df /* save/restore register 3 */
+
+ /*
+ * 405 does not really have CSRR0/1 but SRR2/3 are used during critical
+ * exception for the exact same purposes - let's alias them and have a
+ * common handling in crit_return() and CRIT_EXCEPTION
+ */
+ #define csrr0 srr2
+ #define csrr1 srr3
+
#define dbsr 0x3f0 /* debug status register */
#define dbcr0 0x3f2 /* debug control register 0 */
#define dbcr1 0x3bd /* debug control register 1 */
@@ -134,12 +143,12 @@
#define UIC_USBH1 0x00040000 /* USB Host 1 */
#define UIC_USBH2 0x00020000 /* USB Host 2 */
#define UIC_USBDEV 0x00010000 /* USB Device */
-#define UIC_ENET 0x00008000 /* Ethernet interrupt status */
-#define UIC_ENET1 0x00008000 /* dummy define */
+#define UIC_ENET 0x00008000 /* Ethernet interrupt status */
+#define UIC_ENET1 0x00008000 /* dummy define */
#define UIC_EMAC_WAKE 0x00004000 /* EMAC wake up */
#define UIC_MADMAL 0x00002000 /* Logical OR of following MadMAL int */
-#define UIC_MAL_SERR 0x00002000 /* MAL SERR */
+#define UIC_MAL_SERR 0x00002000 /* MAL SERR */
#define UIC_MAL_TXDE 0x00002000 /* MAL TXDE */
#define UIC_MAL_RXDE 0x00002000 /* MAL RXDE */
@@ -877,7 +886,7 @@
#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */
#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */
#define reset (CNTRL_DCR_BASE+0x3) /* reset register */
-#define strap (CNTRL_DCR_BASE+0x4) /* strap register */
+#define strap (CNTRL_DCR_BASE+0x4) /* strap register */
#define ecr (0xaa) /* edge conditioner register (405gpr) */
@@ -1110,13 +1119,13 @@
| UART Register Offsets
'----------------------------------------------------------------------------*/
#define DATA_REG 0x00
-#define DL_LSB 0x00
-#define DL_MSB 0x01
+#define DL_LSB 0x00
+#define DL_MSB 0x01
#define INT_ENABLE 0x01
#define FIFO_CONTROL 0x02
#define LINE_CONTROL 0x03
#define MODEM_CONTROL 0x04
-#define LINE_STATUS 0x05
+#define LINE_STATUS 0x05
#define MODEM_STATUS 0x06
#define SCRATCH 0x07
diff --git a/include/ppc440.h b/include/ppc440.h
index 07f75de..93c10f1 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -82,10 +82,7 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@@ -115,7 +112,7 @@
#define icdbtrh 0x39f /* instruction cache debug tag register high */
#define mmucr 0x3b2 /* mmu control register */
#define ccr0 0x3b3 /* core configuration register 0 */
-#define ccr1 0x378 /* core configuration for 440x5 only */
+#define ccr1 0x378 /* core configuration for 440x5 only */
#define icdbdr 0x3d3 /* instruction cache debug data register */
#define dbdr 0x3f3 /* debug data register */
@@ -139,7 +136,7 @@
#define clk_opbd 0x00c0
#define clk_perd 0x00e0
#define clk_mald 0x0100
-#define clk_spcid 0x0120
+#define clk_spcid 0x0120
#define clk_icfg 0x0140
/* 440gx sdr register definations */
@@ -285,6 +282,30 @@
#define sdr_sdstp3 0x4003
#endif /* CONFIG_440GX */
+/*----------------------------------------------------------------------------+
+| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
++----------------------------------------------------------------------------*/
+#define CCR0_PRE 0x40000000
+#define CCR0_CRPE 0x08000000
+#define CCR0_DSTG 0x00200000
+#define CCR0_DAPUIB 0x00100000
+#define CCR0_DTB 0x00008000
+#define CCR0_GICBT 0x00004000
+#define CCR0_GDCBT 0x00002000
+#define CCR0_FLSTA 0x00000100
+#define CCR0_ICSLC_MASK 0x0000000C
+#define CCR0_ICSLT_MASK 0x00000003
+#define CCR1_TCS_MASK 0x00000080
+#define CCR1_TCS_INTCLK 0x00000000
+#define CCR1_TCS_EXTCLK 0x00000080
+#define MMUCR_SWOA 0x01000000
+#define MMUCR_U1TE 0x00400000
+#define MMUCR_U2SWOAE 0x00200000
+#define MMUCR_DULXE 0x00800000
+#define MMUCR_IULXE 0x00400000
+#define MMUCR_STS 0x00100000
+#define MMUCR_STID_MASK 0x000000FF
+
#ifdef CONFIG_440SPE
#undef sdr_sdstp2
#define sdr_sdstp2 0x0022
@@ -310,30 +331,6 @@
#define sdr_sdstp6 0x4005
#define sdr_sdstp7 0x4007
-/*----------------------------------------------------------------------------+
-| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
-+----------------------------------------------------------------------------*/
-#define CCR0_PRE 0x40000000
-#define CCR0_CRPE 0x08000000
-#define CCR0_DSTG 0x00200000
-#define CCR0_DAPUIB 0x00100000
-#define CCR0_DTB 0x00008000
-#define CCR0_GICBT 0x00004000
-#define CCR0_GDCBT 0x00002000
-#define CCR0_FLSTA 0x00000100
-#define CCR0_ICSLC_MASK 0x0000000C
-#define CCR0_ICSLT_MASK 0x00000003
-#define CCR1_TCS_MASK 0x00000080
-#define CCR1_TCS_INTCLK 0x00000000
-#define CCR1_TCS_EXTCLK 0x00000080
-#define MMUCR_SEOA 0x01000000
-#define MMUCR_U1TE 0x00400000
-#define MMUCR_U2SWOAE 0x00200000
-#define MMUCR_DULXE 0x00800000
-#define MMUCR_IULXE 0x00400000
-#define MMUCR_STS 0x00100000
-#define MMUCR_STID_MASK 0x000000FF
-
#define SDR0_CFGADDR 0x00E
#define SDR0_CFGDATA 0x00F
@@ -687,8 +684,8 @@
#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
-#define SDRAM_CODT_IO_HIZ 0x00000000
-#define SDRAM_CODT_IO_NMODE 0x00000001
+#define SDRAM_CODT_IO_HIZ 0x00000000
+#define SDRAM_CODT_IO_NMODE 0x00000001
/*-----------------------------------------------------------------------------+
| SDRAM Mode Register
@@ -956,7 +953,8 @@
#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Pin Function Control Register 1 */
#define SDR0_PFC1 0x4101
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
@@ -1025,7 +1023,7 @@
#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR_USB2D0CR 0x0320
+#define SDR0_USB2D0CR 0x0320
#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC Master Selection */
#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection */
#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */
@@ -1103,6 +1101,8 @@
#define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */
#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */
+#define SDR0_PFC4 0x4104
+
/* USB2PHY0 Control Register */
#define SDR0_USB2PHY0CR 0x4103
#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */
@@ -1421,7 +1421,7 @@
#define uicvr uic0vr
#define uicvcr uic0vcr
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX)
/*----------------------------------------------------------------------------+
| Clock / Power-on-reset DCR's.
+----------------------------------------------------------------------------*/
@@ -1490,9 +1490,11 @@
#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
#define CPR0_PERD 0xE0
+#if !defined(CONFIG_440EPX)
#define CPR0_PERD_PERDV0_MASK 0x03000000
#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+#endif
#define CPR0_MALD 0x100
#define CPR0_MALD_MALDV0_MASK 0x03000000
diff --git a/include/ppc4xx.h b/include/ppc4xx.h
index 67759c7..ca241d2 100644
--- a/include/ppc4xx.h
+++ b/include/ppc4xx.h
@@ -22,6 +22,8 @@
#ifndef __PPC4XX_H__
#define __PPC4XX_H__
+#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
+#define _START_OFFSET (EXC_OFF_SYS_RESET + 0x2000)
#if defined(CONFIG_440)
#include <ppc440.h>
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 3e47e82..9f4029f 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -113,11 +113,11 @@
#if defined(CONFIG_5xx)
/* Some special purpose registers */
-#define DER 149 /* Debug Enable Register */
-#define COUNTA 150 /* Breakpoint Counter */
-#define COUNTB 151 /* Breakpoint Counter */
-#define LCTRL1 156 /* Load/Store Support */
-#define LCTRL2 157 /* Load/Store Support */
+#define DER 149 /* Debug Enable Register */
+#define COUNTA 150 /* Breakpoint Counter */
+#define COUNTB 151 /* Breakpoint Counter */
+#define LCTRL1 156 /* Load/Store Support */
+#define LCTRL2 157 /* Load/Store Support */
#define ICTRL 158 /* I-Bus Support Control Register */
#define EID 81
#endif /* CONFIG_5xx */
@@ -217,7 +217,7 @@
* We assume sprg3 has the physical address of the current
* task's thread_struct.
*/
-#define EXCEPTION_PROLOG \
+#define EXCEPTION_PROLOG(reg1, reg2) \
mtspr SPRG0,r20; \
mtspr SPRG1,r21; \
mfcr r20; \
@@ -235,8 +235,10 @@
stw r22,_CTR(r21); \
mfspr r20,XER; \
stw r20,_XER(r21); \
- mfspr r22,SRR0; \
- mfspr r23,SRR1; \
+ mfspr r20,DEAR; \
+ stw r20,_DAR(r21); \
+ mfspr r22,reg1; \
+ mfspr r23,reg2; \
stw r0,GPR0(r21); \
stw r1,GPR1(r21); \
stw r2,GPR2(r21); \
@@ -249,41 +251,6 @@
*/
/*
- * Critical exception entry code. This is just like the other exception
- * code except that it uses SRR2 and SRR3 instead of SRR0 and SRR1.
- */
-#define CRITICAL_EXCEPTION_PROLOG \
- mtspr SPRG0,r20; \
- mtspr SPRG1,r21; \
- mfcr r20; \
- subi r21,r1,INT_FRAME_SIZE+STACK_UNDERHEAD; /* alloc exc. frame */\
- stw r20,_CCR(r21); /* save registers */ \
- stw r22,GPR22(r21); \
- stw r23,GPR23(r21); \
- mfspr r20,SPRG0; \
- stw r20,GPR20(r21); \
- mfspr r22,SPRG1; \
- stw r22,GPR21(r21); \
- mflr r20; \
- stw r20,_LINK(r21); \
- mfctr r22; \
- stw r22,_CTR(r21); \
- mfspr r20,XER; \
- stw r20,_XER(r21); \
- mfspr r22,990; /* SRR2 */ \
- mfspr r23,991; /* SRR3 */ \
- stw r0,GPR0(r21); \
- stw r1,GPR1(r21); \
- stw r2,GPR2(r21); \
- stw r1,0(r21); \
- mr r1,r21; /* set new kernel sp */ \
- SAVE_4GPRS(3, r21);
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r21, r22 (SRR2), and r23 (SRR3).
- */
-
-/*
* Exception vectors.
*
* The data words for `hdlr' and `int_return' are initialized with
@@ -293,30 +260,45 @@
#define STD_EXCEPTION(n, label, hdlr) \
. = n; \
label: \
- EXCEPTION_PROLOG; \
+ EXCEPTION_PROLOG(SRR0, SRR1); \
lwz r3,GOT(transfer_to_handler); \
mtlr r3; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
li r20,MSR_KERNEL; \
rlwimi r20,r23,0,25,25; \
- blrl ; \
+ blrl; \
.L_ ## label : \
- .long hdlr - _start + EXC_OFF_SYS_RESET; \
- .long int_return - _start + EXC_OFF_SYS_RESET
+ .long hdlr - _start + _START_OFFSET; \
+ .long int_return - _start + _START_OFFSET
+#define CRIT_EXCEPTION(n, label, hdlr) \
+ . = n; \
+label: \
+ EXCEPTION_PROLOG(CSRR0, CSRR1); \
+ lwz r3,GOT(transfer_to_handler); \
+ mtlr r3; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \
+ rlwimi r20,r23,0,25,25; \
+ blrl; \
+.L_ ## label : \
+ .long hdlr - _start + _START_OFFSET; \
+ .long crit_return - _start + _START_OFFSET
-#define CRIT_EXCEPTION(n, label, hdlr) \
- . = n; \
-label: \
- CRITICAL_EXCEPTION_PROLOG; \
- lwz r3,GOT(transfer_to_handler); \
- mtlr r3; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \
- rlwimi r20,r23,0,25,25; \
- blrl ; \
-.L_ ## label : \
- .long hdlr - _start + EXC_OFF_SYS_RESET; \
- .long crit_return - _start + EXC_OFF_SYS_RESET
+#ifdef CONFIG_440
+#define MCK_EXCEPTION(n, label, hdlr) \
+ . = n; \
+label: \
+ EXCEPTION_PROLOG(MCSRR0, MCSRR1); \
+ lwz r3,GOT(transfer_to_handler); \
+ mtlr r3; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \
+ rlwimi r20,r23,0,25,25; \
+ blrl; \
+.L_ ## label : \
+ .long hdlr - _start + _START_OFFSET; \
+ .long mck_return - _start + _START_OFFSET
+#endif /* CONFIG_440 */
#endif /* __PPC_ASM_TMPL__ */
diff --git a/include/sata.h b/include/sata.h
new file mode 100644
index 0000000..165b471
--- /dev/null
+++ b/include/sata.h
@@ -0,0 +1,108 @@
+
+#if (DEBUG_SATA)
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+struct sata_ioports {
+ unsigned long cmd_addr;
+ unsigned long data_addr;
+ unsigned long error_addr;
+ unsigned long feature_addr;
+ unsigned long nsect_addr;
+ unsigned long lbal_addr;
+ unsigned long lbam_addr;
+ unsigned long lbah_addr;
+ unsigned long device_addr;
+ unsigned long status_addr;
+ unsigned long command_addr;
+ unsigned long altstatus_addr;
+ unsigned long ctl_addr;
+ unsigned long bmdma_addr;
+ unsigned long scr_addr;
+};
+
+struct sata_port {
+ unsigned char port_no; /* primary=0, secondary=1 */
+ struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */
+ unsigned char ctl_reg;
+ unsigned char last_ctl;
+ unsigned char port_state; /* 1-port is available and */
+ /* 0-port is not available */
+ unsigned char dev_mask;
+};
+
+/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/
+#ifdef SATA_DECL /*SATA library specific declarations */
+#define ata_id_has_lba48(id) ((id)[83] & (1 << 10))
+#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
+#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
+#define ata_id_u32(id,n) \
+ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
+#define ata_id_u64(id,n) \
+ (((u64) (id)[(n) + 3] << 48) | \
+ ((u64) (id)[(n) + 2] << 32) | \
+ ((u64) (id)[(n) + 1] << 16) | \
+ ((u64) (id)[(n) + 0]) )
+#endif
+
+#ifdef SATA_DECL /*SATA library specific declarations */
+static inline void
+ata_dump_id (u16 * id)
+{
+ PRINTF ("49==0x%04x "
+ "53==0x%04x "
+ "63==0x%04x "
+ "64==0x%04x "
+ "75==0x%04x \n", id[49], id[53], id[63], id[64], id[75]);
+ PRINTF ("80==0x%04x "
+ "81==0x%04x "
+ "82==0x%04x "
+ "83==0x%04x "
+ "84==0x%04x \n", id[80], id[81], id[82], id[83], id[84]);
+ PRINTF ("88==0x%04x " "93==0x%04x\n", id[88], id[93]);
+}
+#endif
+
+#ifdef SATA_DECL /*SATA library specific declarations */
+int sata_bus_softreset (int num);
+void sata_identify (int num, int dev);
+void sata_port (struct sata_ioports *ioport);
+void set_Feature_cmd (int num, int dev);
+int sata_devchk (struct sata_ioports *ioaddr, int dev);
+void dev_select (struct sata_ioports *ioaddr, int dev);
+u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max);
+u8 sata_chk_status (struct sata_ioports *ioaddr);
+ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buffer);
+ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void * buffer);
+void msleep (int count);
+#else
+extern int sata_bus_softreset (int num);
+extern void sata_identify (int num, int dev);
+extern void sata_port (struct sata_ioports *ioport);
+extern void set_Feature_cmd (int num, int dev);
+extern ulong sata_read (int device, ulong blknr,
+ lbaint_t blkcnt, void * buffer);
+extern ulong sata_write (int device, ulong blknr,
+ lbaint_t blkcnt, void * buffer);
+extern void msleep (int count);
+#endif
+
+/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/
+
+#ifdef DRV_DECL /*Driver specific declaration */
+int init_sata (void);
+#else
+extern int init_sata (void);
+#endif
+
+#ifdef DRV_DECL /*Defines Driver Specific variables */
+struct sata_port port[CFG_SATA_MAXBUS];
+block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
+int curr_dev = -1;
+#else
+extern struct sata_port port[CFG_SATA_MAXBUS];
+extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
+extern int curr_dev;
+#endif
diff --git a/include/sha1.h b/include/sha1.h
new file mode 100644
index 0000000..15ea13c
--- /dev/null
+++ b/include/sha1.h
@@ -0,0 +1,115 @@
+/**
+ * \file sha1.h
+ * based from http://xyssl.org/code/source/sha1/
+ * FIPS-180-1 compliant SHA-1 implementation
+ *
+ * Copyright (C) 2003-2006 Christophe Devine
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License, version 2.1 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+/*
+ * The SHA-1 standard was published by NIST in 1993.
+ *
+ * http://www.itl.nist.gov/fipspubs/fip180-1.htm
+ */
+#ifndef _SHA1_H
+#define _SHA1_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define SHA1_SUM_POS -0x20
+#define SHA1_SUM_LEN 20
+
+/**
+ * \brief SHA-1 context structure
+ */
+typedef struct
+{
+ unsigned long total[2]; /*!< number of bytes processed */
+ unsigned long state[5]; /*!< intermediate digest state */
+ unsigned char buffer[64]; /*!< data block being processed */
+}
+sha1_context;
+
+/**
+ * \brief SHA-1 context setup
+ *
+ * \param ctx SHA-1 context to be initialized
+ */
+void sha1_starts( sha1_context *ctx );
+
+/**
+ * \brief SHA-1 process buffer
+ *
+ * \param ctx SHA-1 context
+ * \param input buffer holding the data
+ * \param ilen length of the input data
+ */
+void sha1_update( sha1_context *ctx, unsigned char *input, int ilen );
+
+/**
+ * \brief SHA-1 final digest
+ *
+ * \param ctx SHA-1 context
+ * \param output SHA-1 checksum result
+ */
+void sha1_finish( sha1_context *ctx, unsigned char output[20] );
+
+/**
+ * \brief Output = SHA-1( input buffer )
+ *
+ * \param input buffer holding the data
+ * \param ilen length of the input data
+ * \param output SHA-1 checksum result
+ */
+void sha1_csum( unsigned char *input, int ilen,
+ unsigned char output[20] );
+
+/**
+ * \brief Output = SHA-1( file contents )
+ *
+ * \param path input file name
+ * \param output SHA-1 checksum result
+ * \return 0 if successful, or 1 if fopen failed
+ */
+int sha1_file( char *path, unsigned char output[20] );
+
+/**
+ * \brief Output = HMAC-SHA-1( input buffer, hmac key )
+ *
+ * \param key HMAC secret key
+ * \param keylen length of the HMAC key
+ * \param input buffer holding the data
+ * \param ilen length of the input data
+ * \param output HMAC-SHA-1 result
+ */
+void sha1_hmac( unsigned char *key, int keylen,
+ unsigned char *input, int ilen,
+ unsigned char output[20] );
+
+/**
+ * \brief Checkup routine
+ *
+ * \return 0 if successful, or 1 if the test failed
+ */
+int sha1_self_test( void );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* sha1.h */
diff --git a/include/status_led.h b/include/status_led.h
index 71a202f..a646814 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -367,6 +367,13 @@
#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+#elif defined(CONFIG_BOARD_SPECIFIC_LED)
+/* led_id_t is unsigned long mask */
+typedef unsigned long led_id_t;
+
+extern void __led_toggle (led_id_t mask);
+extern void __led_init (led_id_t mask, int state);
+extern void __led_set (led_id_t mask, int state);
#else
# error Status LED configuration missing
#endif
diff --git a/lib_generic/Makefile b/lib_generic/Makefile
index f012cab..b2091c5 100644
--- a/lib_generic/Makefile
+++ b/lib_generic/Makefile
@@ -27,7 +27,7 @@
COBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
bzlib_randtable.o bzlib_huffman.o \
- crc32.o ctype.o display_options.o ldiv.o \
+ crc32.o ctype.o display_options.o ldiv.o sha1.o \
string.o vsprintf.o zlib.o
SRCS := $(COBJS:.o=.c)
diff --git a/lib_generic/sha1.c b/lib_generic/sha1.c
new file mode 100644
index 0000000..08ffa6b
--- /dev/null
+++ b/lib_generic/sha1.c
@@ -0,0 +1,413 @@
+/*
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ * based on:
+ * FIPS-180-1 compliant SHA-1 implementation
+ *
+ * Copyright (C) 2003-2006 Christophe Devine
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License, version 2.1 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+/*
+ * The SHA-1 standard was published by NIST in 1993.
+ *
+ * http://www.itl.nist.gov/fipspubs/fip180-1.htm
+ */
+
+#ifndef _CRT_SECURE_NO_DEPRECATE
+#define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+
+#include <linux/string.h>
+#include "sha1.h"
+
+/*
+ * 32-bit integer manipulation macros (big endian)
+ */
+#ifndef GET_UINT32_BE
+#define GET_UINT32_BE(n,b,i) { \
+ (n) = ( (unsigned long) (b)[(i) ] << 24 ) \
+ | ( (unsigned long) (b)[(i) + 1] << 16 ) \
+ | ( (unsigned long) (b)[(i) + 2] << 8 ) \
+ | ( (unsigned long) (b)[(i) + 3] ); \
+}
+#endif
+#ifndef PUT_UINT32_BE
+#define PUT_UINT32_BE(n,b,i) { \
+ (b)[(i) ] = (unsigned char) ( (n) >> 24 ); \
+ (b)[(i) + 1] = (unsigned char) ( (n) >> 16 ); \
+ (b)[(i) + 2] = (unsigned char) ( (n) >> 8 ); \
+ (b)[(i) + 3] = (unsigned char) ( (n) ); \
+}
+#endif
+
+/*
+ * SHA-1 context setup
+ */
+void sha1_starts (sha1_context * ctx)
+{
+ ctx->total[0] = 0;
+ ctx->total[1] = 0;
+
+ ctx->state[0] = 0x67452301;
+ ctx->state[1] = 0xEFCDAB89;
+ ctx->state[2] = 0x98BADCFE;
+ ctx->state[3] = 0x10325476;
+ ctx->state[4] = 0xC3D2E1F0;
+}
+
+static void sha1_process (sha1_context * ctx, unsigned char data[64])
+{
+ unsigned long temp, W[16], A, B, C, D, E;
+
+ GET_UINT32_BE (W[0], data, 0);
+ GET_UINT32_BE (W[1], data, 4);
+ GET_UINT32_BE (W[2], data, 8);
+ GET_UINT32_BE (W[3], data, 12);
+ GET_UINT32_BE (W[4], data, 16);
+ GET_UINT32_BE (W[5], data, 20);
+ GET_UINT32_BE (W[6], data, 24);
+ GET_UINT32_BE (W[7], data, 28);
+ GET_UINT32_BE (W[8], data, 32);
+ GET_UINT32_BE (W[9], data, 36);
+ GET_UINT32_BE (W[10], data, 40);
+ GET_UINT32_BE (W[11], data, 44);
+ GET_UINT32_BE (W[12], data, 48);
+ GET_UINT32_BE (W[13], data, 52);
+ GET_UINT32_BE (W[14], data, 56);
+ GET_UINT32_BE (W[15], data, 60);
+
+#define S(x,n) ((x << n) | ((x & 0xFFFFFFFF) >> (32 - n)))
+
+#define R(t) ( \
+ temp = W[(t - 3) & 0x0F] ^ W[(t - 8) & 0x0F] ^ \
+ W[(t - 14) & 0x0F] ^ W[ t & 0x0F], \
+ ( W[t & 0x0F] = S(temp,1) ) \
+)
+
+#define P(a,b,c,d,e,x) { \
+ e += S(a,5) + F(b,c,d) + K + x; b = S(b,30); \
+}
+
+ A = ctx->state[0];
+ B = ctx->state[1];
+ C = ctx->state[2];
+ D = ctx->state[3];
+ E = ctx->state[4];
+
+#define F(x,y,z) (z ^ (x & (y ^ z)))
+#define K 0x5A827999
+
+ P (A, B, C, D, E, W[0]);
+ P (E, A, B, C, D, W[1]);
+ P (D, E, A, B, C, W[2]);
+ P (C, D, E, A, B, W[3]);
+ P (B, C, D, E, A, W[4]);
+ P (A, B, C, D, E, W[5]);
+ P (E, A, B, C, D, W[6]);
+ P (D, E, A, B, C, W[7]);
+ P (C, D, E, A, B, W[8]);
+ P (B, C, D, E, A, W[9]);
+ P (A, B, C, D, E, W[10]);
+ P (E, A, B, C, D, W[11]);
+ P (D, E, A, B, C, W[12]);
+ P (C, D, E, A, B, W[13]);
+ P (B, C, D, E, A, W[14]);
+ P (A, B, C, D, E, W[15]);
+ P (E, A, B, C, D, R (16));
+ P (D, E, A, B, C, R (17));
+ P (C, D, E, A, B, R (18));
+ P (B, C, D, E, A, R (19));
+
+#undef K
+#undef F
+
+#define F(x,y,z) (x ^ y ^ z)
+#define K 0x6ED9EBA1
+
+ P (A, B, C, D, E, R (20));
+ P (E, A, B, C, D, R (21));
+ P (D, E, A, B, C, R (22));
+ P (C, D, E, A, B, R (23));
+ P (B, C, D, E, A, R (24));
+ P (A, B, C, D, E, R (25));
+ P (E, A, B, C, D, R (26));
+ P (D, E, A, B, C, R (27));
+ P (C, D, E, A, B, R (28));
+ P (B, C, D, E, A, R (29));
+ P (A, B, C, D, E, R (30));
+ P (E, A, B, C, D, R (31));
+ P (D, E, A, B, C, R (32));
+ P (C, D, E, A, B, R (33));
+ P (B, C, D, E, A, R (34));
+ P (A, B, C, D, E, R (35));
+ P (E, A, B, C, D, R (36));
+ P (D, E, A, B, C, R (37));
+ P (C, D, E, A, B, R (38));
+ P (B, C, D, E, A, R (39));
+
+#undef K
+#undef F
+
+#define F(x,y,z) ((x & y) | (z & (x | y)))
+#define K 0x8F1BBCDC
+
+ P (A, B, C, D, E, R (40));
+ P (E, A, B, C, D, R (41));
+ P (D, E, A, B, C, R (42));
+ P (C, D, E, A, B, R (43));
+ P (B, C, D, E, A, R (44));
+ P (A, B, C, D, E, R (45));
+ P (E, A, B, C, D, R (46));
+ P (D, E, A, B, C, R (47));
+ P (C, D, E, A, B, R (48));
+ P (B, C, D, E, A, R (49));
+ P (A, B, C, D, E, R (50));
+ P (E, A, B, C, D, R (51));
+ P (D, E, A, B, C, R (52));
+ P (C, D, E, A, B, R (53));
+ P (B, C, D, E, A, R (54));
+ P (A, B, C, D, E, R (55));
+ P (E, A, B, C, D, R (56));
+ P (D, E, A, B, C, R (57));
+ P (C, D, E, A, B, R (58));
+ P (B, C, D, E, A, R (59));
+
+#undef K
+#undef F
+
+#define F(x,y,z) (x ^ y ^ z)
+#define K 0xCA62C1D6
+
+ P (A, B, C, D, E, R (60));
+ P (E, A, B, C, D, R (61));
+ P (D, E, A, B, C, R (62));
+ P (C, D, E, A, B, R (63));
+ P (B, C, D, E, A, R (64));
+ P (A, B, C, D, E, R (65));
+ P (E, A, B, C, D, R (66));
+ P (D, E, A, B, C, R (67));
+ P (C, D, E, A, B, R (68));
+ P (B, C, D, E, A, R (69));
+ P (A, B, C, D, E, R (70));
+ P (E, A, B, C, D, R (71));
+ P (D, E, A, B, C, R (72));
+ P (C, D, E, A, B, R (73));
+ P (B, C, D, E, A, R (74));
+ P (A, B, C, D, E, R (75));
+ P (E, A, B, C, D, R (76));
+ P (D, E, A, B, C, R (77));
+ P (C, D, E, A, B, R (78));
+ P (B, C, D, E, A, R (79));
+
+#undef K
+#undef F
+
+ ctx->state[0] += A;
+ ctx->state[1] += B;
+ ctx->state[2] += C;
+ ctx->state[3] += D;
+ ctx->state[4] += E;
+}
+
+/*
+ * SHA-1 process buffer
+ */
+void sha1_update (sha1_context * ctx, unsigned char *input, int ilen)
+{
+ int fill;
+ unsigned long left;
+
+ if (ilen <= 0)
+ return;
+
+ left = ctx->total[0] & 0x3F;
+ fill = 64 - left;
+
+ ctx->total[0] += ilen;
+ ctx->total[0] &= 0xFFFFFFFF;
+
+ if (ctx->total[0] < (unsigned long) ilen)
+ ctx->total[1]++;
+
+ if (left && ilen >= fill) {
+ memcpy ((void *) (ctx->buffer + left), (void *) input, fill);
+ sha1_process (ctx, ctx->buffer);
+ input += fill;
+ ilen -= fill;
+ left = 0;
+ }
+
+ while (ilen >= 64) {
+ sha1_process (ctx, input);
+ input += 64;
+ ilen -= 64;
+ }
+
+ if (ilen > 0) {
+ memcpy ((void *) (ctx->buffer + left), (void *) input, ilen);
+ }
+}
+
+static const unsigned char sha1_padding[64] = {
+ 0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/*
+ * SHA-1 final digest
+ */
+void sha1_finish (sha1_context * ctx, unsigned char output[20])
+{
+ unsigned long last, padn;
+ unsigned long high, low;
+ unsigned char msglen[8];
+
+ high = (ctx->total[0] >> 29)
+ | (ctx->total[1] << 3);
+ low = (ctx->total[0] << 3);
+
+ PUT_UINT32_BE (high, msglen, 0);
+ PUT_UINT32_BE (low, msglen, 4);
+
+ last = ctx->total[0] & 0x3F;
+ padn = (last < 56) ? (56 - last) : (120 - last);
+
+ sha1_update (ctx, (unsigned char *) sha1_padding, padn);
+ sha1_update (ctx, msglen, 8);
+
+ PUT_UINT32_BE (ctx->state[0], output, 0);
+ PUT_UINT32_BE (ctx->state[1], output, 4);
+ PUT_UINT32_BE (ctx->state[2], output, 8);
+ PUT_UINT32_BE (ctx->state[3], output, 12);
+ PUT_UINT32_BE (ctx->state[4], output, 16);
+}
+
+/*
+ * Output = SHA-1( input buffer )
+ */
+void sha1_csum (unsigned char *input, int ilen, unsigned char output[20])
+{
+ sha1_context ctx;
+
+ sha1_starts (&ctx);
+ sha1_update (&ctx, input, ilen);
+ sha1_finish (&ctx, output);
+}
+
+/*
+ * Output = HMAC-SHA-1( input buffer, hmac key )
+ */
+void sha1_hmac (unsigned char *key, int keylen,
+ unsigned char *input, int ilen, unsigned char output[20])
+{
+ int i;
+ sha1_context ctx;
+ unsigned char k_ipad[64];
+ unsigned char k_opad[64];
+ unsigned char tmpbuf[20];
+
+ memset (k_ipad, 0x36, 64);
+ memset (k_opad, 0x5C, 64);
+
+ for (i = 0; i < keylen; i++) {
+ if (i >= 64)
+ break;
+
+ k_ipad[i] ^= key[i];
+ k_opad[i] ^= key[i];
+ }
+
+ sha1_starts (&ctx);
+ sha1_update (&ctx, k_ipad, 64);
+ sha1_update (&ctx, input, ilen);
+ sha1_finish (&ctx, tmpbuf);
+
+ sha1_starts (&ctx);
+ sha1_update (&ctx, k_opad, 64);
+ sha1_update (&ctx, tmpbuf, 20);
+ sha1_finish (&ctx, output);
+
+ memset (k_ipad, 0, 64);
+ memset (k_opad, 0, 64);
+ memset (tmpbuf, 0, 20);
+ memset (&ctx, 0, sizeof (sha1_context));
+}
+
+static const char _sha1_src[] = "_sha1_src";
+
+#ifdef SELF_TEST
+/*
+ * FIPS-180-1 test vectors
+ */
+static const char sha1_test_str[3][57] = {
+ {"abc"},
+ {"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq"},
+ {""}
+};
+
+static const unsigned char sha1_test_sum[3][20] = {
+ {0xA9, 0x99, 0x3E, 0x36, 0x47, 0x06, 0x81, 0x6A, 0xBA, 0x3E,
+ 0x25, 0x71, 0x78, 0x50, 0xC2, 0x6C, 0x9C, 0xD0, 0xD8, 0x9D},
+ {0x84, 0x98, 0x3E, 0x44, 0x1C, 0x3B, 0xD2, 0x6E, 0xBA, 0xAE,
+ 0x4A, 0xA1, 0xF9, 0x51, 0x29, 0xE5, 0xE5, 0x46, 0x70, 0xF1},
+ {0x34, 0xAA, 0x97, 0x3C, 0xD4, 0xC4, 0xDA, 0xA4, 0xF6, 0x1E,
+ 0xEB, 0x2B, 0xDB, 0xAD, 0x27, 0x31, 0x65, 0x34, 0x01, 0x6F}
+};
+
+/*
+ * Checkup routine
+ */
+int sha1_self_test (void)
+{
+ int i, j;
+ unsigned char buf[1000];
+ unsigned char sha1sum[20];
+ sha1_context ctx;
+
+ for (i = 0; i < 3; i++) {
+ printf (" SHA-1 test #%d: ", i + 1);
+
+ sha1_starts (&ctx);
+
+ if (i < 2)
+ sha1_update (&ctx, (unsigned char *) sha1_test_str[i],
+ strlen (sha1_test_str[i]));
+ else {
+ memset (buf, 'a', 1000);
+ for (j = 0; j < 1000; j++)
+ sha1_update (&ctx, buf, 1000);
+ }
+
+ sha1_finish (&ctx, sha1sum);
+
+ if (memcmp (sha1sum, sha1_test_sum[i], 20) != 0) {
+ printf ("failed\n");
+ return (1);
+ }
+
+ printf ("passed\n");
+ }
+
+ printf ("\n");
+ return (0);
+}
+#else
+int sha1_self_test (void)
+{
+ return (0);
+}
+#endif
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index c4fc580..f5d18fa 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -896,7 +896,8 @@
#if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
defined(CONFIG_TQM8272) || \
- defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
+ defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
+ defined(CONFIG_KUP4X) || defined(CONFIG_PCS440EP)
load_sernum_ethaddr ();
#endif
/* IP Address */
@@ -961,7 +962,7 @@
serial_buffered_init();
#endif
-#ifdef CONFIG_STATUS_LED
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
#endif
diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c
index b14d661..8354411 100644
--- a/lib_ppc/extable.c
+++ b/lib_ppc/extable.c
@@ -52,30 +52,27 @@
const struct exception_table_entry *last,
unsigned long value)
{
- while (first <= last) {
- const struct exception_table_entry *mid;
- long diff;
-
- mid = (last - first) / 2 + first;
- if ((ulong) mid > CFG_MONITOR_BASE) {
- /* exception occurs in FLASH, before u-boot relocation.
- * No relocation offset is needed.
- */
- diff = mid->insn - value;
+ long diff;
+ if ((ulong) first > CFG_MONITOR_BASE) {
+ /* exception occurs in FLASH, before u-boot relocation.
+ * No relocation offset is needed.
+ */
+ while (first <= last) {
+ diff = first->insn - value;
if (diff == 0)
- return mid->fixup;
- } else {
- /* exception occurs in RAM, after u-boot relocation.
- * A relocation offset should be added.
- */
- diff = (mid->insn + gd->reloc_off) - value;
- if (diff == 0)
- return (mid->fixup + gd->reloc_off);
+ return first->fixup;
+ first++;
}
- if (diff < 0)
- first = mid + 1;
- else
- last = mid - 1;
+ } else {
+ /* exception occurs in RAM, after u-boot relocation.
+ * A relocation offset should be added.
+ */
+ while (first <= last) {
+ diff = (first->insn + gd->reloc_off) - value;
+ if (diff == 0)
+ return (first->fixup + gd->reloc_off);
+ first++;
+ }
}
return 0;
}
diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile
index 0d6828a..926476f 100644
--- a/nand_spl/board/amcc/acadia/Makefile
+++ b/nand_spl/board/amcc/acadia/Makefile
@@ -30,7 +30,7 @@
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o resetvec.o
-COBJS = gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o
+COBJS = gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o pll.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -39,7 +39,8 @@
nandobj := $(OBJTREE)/nand_spl/
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin \
+ $(nandobj)System.map
all: $(obj).depend $(ALL)
@@ -54,6 +55,11 @@
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
+$(nandobj)System.map: $(nandobj)u-boot-spl
+ @$(NM) $< | \
+ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+ sort > $(nandobj)System.map
+
# create symbolic links for common files
# from cpu directory
@@ -78,6 +84,10 @@
@rm -f $(obj)memory.c
ln -s $(SRCTREE)/board/amcc/acadia/memory.c $(obj)memory.c
+$(obj)pll.c:
+ @rm -f $(obj)pll.c
+ ln -s $(SRCTREE)/board/amcc/acadia/pll.c $(obj)pll.c
+
# from nand_spl directory
$(obj)nand_boot.c:
@rm -f $(obj)nand_boot.c
diff --git a/nand_spl/board/amcc/acadia/config.mk b/nand_spl/board/amcc/acadia/config.mk
index 55069b4..3b140fa 100644
--- a/nand_spl/board/amcc/acadia/config.mk
+++ b/nand_spl/board/amcc/acadia/config.mk
@@ -32,11 +32,11 @@
# We will copy this SPL into internal SRAM in start.S. So we set
# TEXT_BASE to starting address in internal SRAM here.
#
-TEXT_BASE = 0xF8003000
+TEXT_BASE = 0xf8004000
# PAD_TO used to generate a 16kByte binary needed for the combined image
# -> PAD_TO = TEXT_BASE + 0x4000
-PAD_TO = 0xF8007000
+PAD_TO = 0xf8008000
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
diff --git a/nand_spl/board/amcc/acadia/u-boot.lds b/nand_spl/board/amcc/acadia/u-boot.lds
index 018def1..a07a773 100644
--- a/nand_spl/board/amcc/acadia/u-boot.lds
+++ b/nand_spl/board/amcc/acadia/u-boot.lds
@@ -24,7 +24,7 @@
OUTPUT_ARCH(powerpc:common)
SECTIONS
{
- .resetvec 0xF8003FFC :
+ .resetvec 0xf8004ffc :
{
*(.resetvec)
} = 0xffff
diff --git a/net/eth.c b/net/eth.c
index 4394b63..a8709f2 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -28,6 +28,14 @@
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+# include <status_led.h>
+extern void show_ethcfg_progress (int arg);
+# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
#ifdef CFG_GT_6426x
extern int gt6426x_eth_initialize(bd_t *bis);
#endif
@@ -143,6 +151,7 @@
eth_devices = NULL;
eth_current = NULL;
+ SHOW_BOOT_PROGRESS(64);
#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
miiphy_init();
#endif
@@ -174,28 +183,20 @@
#if defined(CONFIG_SK98)
skge_initialize(bis);
#endif
-#if defined(CONFIG_MPC85XX_TSEC1)
- tsec_initialize(bis, 0, CONFIG_MPC85XX_TSEC1_NAME);
-#elif defined(CONFIG_MPC83XX_TSEC1)
- tsec_initialize(bis, 0, CONFIG_MPC83XX_TSEC1_NAME);
+#if defined(CONFIG_TSEC1)
+ tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
#endif
-#if defined(CONFIG_MPC85XX_TSEC2)
- tsec_initialize(bis, 1, CONFIG_MPC85XX_TSEC2_NAME);
-#elif defined(CONFIG_MPC83XX_TSEC2)
- tsec_initialize(bis, 1, CONFIG_MPC83XX_TSEC2_NAME);
+#if defined(CONFIG_TSEC2)
+ tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
#endif
#if defined(CONFIG_MPC85XX_FEC)
tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME);
#else
-# if defined(CONFIG_MPC85XX_TSEC3)
- tsec_initialize(bis, 2, CONFIG_MPC85XX_TSEC3_NAME);
-# elif defined(CONFIG_MPC83XX_TSEC3)
- tsec_initialize(bis, 2, CONFIG_MPC83XX_TSEC3_NAME);
+# if defined(CONFIG_TSEC3)
+ tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
# endif
-# if defined(CONFIG_MPC85XX_TSEC4)
- tsec_initialize(bis, 3, CONFIG_MPC85XX_TSEC4_NAME);
-# elif defined(CONFIG_MPC83XX_TSEC4)
- tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME);
+# if defined(CONFIG_TSEC4)
+ tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
# endif
#endif
#if defined(CONFIG_UEC_ETH1)
@@ -204,21 +205,6 @@
#if defined(CONFIG_UEC_ETH2)
uec_initialize(1);
#endif
-#if defined(CONFIG_MPC86XX_TSEC1)
- tsec_initialize(bis, 0, CONFIG_MPC86XX_TSEC1_NAME);
-#endif
-
-#if defined(CONFIG_MPC86XX_TSEC2)
- tsec_initialize(bis, 1, CONFIG_MPC86XX_TSEC2_NAME);
-#endif
-
-#if defined(CONFIG_MPC86XX_TSEC3)
- tsec_initialize(bis, 2, CONFIG_MPC86XX_TSEC3_NAME);
-#endif
-
-#if defined(CONFIG_MPC86XX_TSEC4)
- tsec_initialize(bis, 3, CONFIG_MPC86XX_TSEC4_NAME);
-#endif
#if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
fec_initialize(bis);
@@ -274,10 +260,12 @@
if (!eth_devices) {
puts ("No ethernet found.\n");
+ SHOW_BOOT_PROGRESS(-64);
} else {
struct eth_device *dev = eth_devices;
char *ethprime = getenv ("ethprime");
+ SHOW_BOOT_PROGRESS(65);
do {
if (eth_number)
puts (", ");
diff --git a/post/cpu/mpc8xx/Makefile b/post/cpu/mpc8xx/Makefile
index 9dd3f0f..f871cba 100644
--- a/post/cpu/mpc8xx/Makefile
+++ b/post/cpu/mpc8xx/Makefile
@@ -24,6 +24,6 @@
LIB = libpostmpc8xx.a
AOBJS = cache_8xx.o
-COBJS = ether.o spr.o uart.o usb.o watchdog.o
+COBJS = cache.o ether.o spr.o uart.o usb.o watchdog.o
include $(TOPDIR)/post/rules.mk
diff --git a/post/drivers/cache.c b/post/cpu/mpc8xx/cache.c
similarity index 100%
rename from post/drivers/cache.c
rename to post/cpu/mpc8xx/cache.c
diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile
new file mode 100644
index 0000000..f1034da
--- /dev/null
+++ b/post/cpu/ppc4xx/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2002-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+LIB = libpostppc4xx.a
+
+AOBJS = cache_4xx.o
+COBJS = cache.o ether.o fpu.o spr.o uart.o watchdog.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c
new file mode 100644
index 0000000..e1f989e
--- /dev/null
+++ b/post/cpu/ppc4xx/cache.c
@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* Cache test
+ *
+ * This test verifies the CPU data and instruction cache using
+ * several test scenarios.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_CACHE
+
+#include <asm/mmu.h>
+#include <watchdog.h>
+
+#define CACHE_POST_SIZE 1024
+
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+
+int cache_post_test1 (int tlb, void *p, int size);
+int cache_post_test2 (int tlb, void *p, int size);
+int cache_post_test3 (int tlb, void *p, int size);
+int cache_post_test4 (int tlb, void *p, int size);
+int cache_post_test5 (int tlb, void *p, int size);
+int cache_post_test6 (int tlb, void *p, int size);
+
+static int tlb = -1; /* index to the victim TLB entry */
+
+static unsigned char testarea[CACHE_POST_SIZE]
+__attribute__((__aligned__(CACHE_POST_SIZE)));
+
+int cache_post_test (int flags)
+{
+ void* virt = (void*)CFG_POST_CACHE_ADDR;
+ int ints, i, res = 0;
+ u32 word0;
+
+ if (tlb < 0) {
+ /*
+ * Allocate a new TLB entry, since we are going to modify
+ * the write-through and caching inhibited storage attributes.
+ */
+ program_tlb((u32)testarea, (u32)virt,
+ CACHE_POST_SIZE, TLB_WORD2_I_ENABLE);
+
+ /* Find the TLB entry */
+ for (i = 0;; i++) {
+ if (i >= PPC4XX_TLB_SIZE) {
+ printf ("Failed to program tlb entry\n");
+ return -1;
+ }
+ word0 = mftlb1(i);
+ if (TLB_WORD0_EPN_DECODE(word0) == (u32)virt) {
+ tlb = i;
+ break;
+ }
+ }
+ }
+ ints = disable_interrupts ();
+
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test1 (tlb, virt, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test2 (tlb, virt, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test3 (tlb, virt, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test4 (tlb, virt, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test5 (tlb, virt, CACHE_POST_SIZE);
+ WATCHDOG_RESET ();
+ if (res == 0)
+ res = cache_post_test6 (tlb, virt, CACHE_POST_SIZE);
+
+ if (ints)
+ enable_interrupts ();
+
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_CACHE */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/ppc4xx/cache_4xx.S b/post/cpu/ppc4xx/cache_4xx.S
new file mode 100644
index 0000000..dddd76b
--- /dev/null
+++ b/post/cpu/ppc4xx/cache_4xx.S
@@ -0,0 +1,448 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if CONFIG_POST & CFG_POST_CACHE
+
+ .text
+
+/* void cache_post_disable (int tlb)
+ */
+cache_post_disable:
+ tlbre r0, r3, 0x0002
+ ori r0, r0, TLB_WORD2_I_ENABLE@l
+ tlbwe r0, r3, 0x0002
+ sync
+ isync
+ blr
+
+/* void cache_post_wt (int tlb)
+ */
+cache_post_wt:
+ tlbre r0, r3, 0x0002
+ ori r0, r0, TLB_WORD2_W_ENABLE@l
+ andi. r0, r0, ~TLB_WORD2_I_ENABLE@l
+ tlbwe r0, r3, 0x0002
+ sync
+ isync
+ blr
+
+/* void cache_post_wb (int tlb)
+ */
+cache_post_wb:
+ tlbre r0, r3, 0x0002
+ andi. r0, r0, ~TLB_WORD2_W_ENABLE@l
+ andi. r0, r0, ~TLB_WORD2_I_ENABLE@l
+ tlbwe r0, r3, 0x0002
+ sync
+ isync
+ blr
+
+/* void cache_post_dinvalidate (void *p, int size)
+ */
+cache_post_dinvalidate:
+ dcbi r0, r3
+ addi r3, r3, CFG_CACHELINE_SIZE
+ subic. r4, r4, CFG_CACHELINE_SIZE
+ bgt cache_post_dinvalidate
+ sync
+ blr
+
+/* void cache_post_dstore (void *p, int size)
+ */
+cache_post_dstore:
+ dcbst r0, r3
+ addi r3, r3, CFG_CACHELINE_SIZE
+ subic. r4, r4, CFG_CACHELINE_SIZE
+ bgt cache_post_dstore
+ sync
+ blr
+
+/* void cache_post_dtouch (void *p, int size)
+ */
+cache_post_dtouch:
+ dcbt r0, r3
+ addi r3, r3, CFG_CACHELINE_SIZE
+ subic. r4, r4, CFG_CACHELINE_SIZE
+ bgt cache_post_dtouch
+ sync
+ blr
+
+/* void cache_post_iinvalidate (void)
+ */
+cache_post_iinvalidate:
+ iccci r0, r0
+ sync
+ blr
+
+/* void cache_post_memset (void *p, int val, int size)
+ */
+cache_post_memset:
+ mtctr r5
+1:
+ stb r4, 0(r3)
+ addi r3, r3, 1
+ bdnz 1b
+ blr
+
+/* int cache_post_check (void *p, int size)
+ */
+cache_post_check:
+ mtctr r4
+1:
+ lbz r0, 0(r3)
+ addi r3, r3, 1
+ cmpwi r0, 0xff
+ bne 2f
+ bdnz 1b
+ li r3, 0
+ blr
+2:
+ li r3, -1
+ blr
+
+#define CACHE_POST_DISABLE() \
+ mr r3, r10; \
+ bl cache_post_disable
+
+#define CACHE_POST_WT() \
+ mr r3, r10; \
+ bl cache_post_wt
+
+#define CACHE_POST_WB() \
+ mr r3, r10; \
+ bl cache_post_wb
+
+#define CACHE_POST_DINVALIDATE() \
+ mr r3, r11; \
+ mr r4, r12; \
+ bl cache_post_dinvalidate
+
+#define CACHE_POST_DFLUSH() \
+ mr r3, r11; \
+ mr r4, r12; \
+ bl cache_post_dflush
+
+#define CACHE_POST_DSTORE() \
+ mr r3, r11; \
+ mr r4, r12; \
+ bl cache_post_dstore
+
+#define CACHE_POST_DTOUCH() \
+ mr r3, r11; \
+ mr r4, r12; \
+ bl cache_post_dtouch
+
+#define CACHE_POST_IINVALIDATE() \
+ bl cache_post_iinvalidate
+
+#define CACHE_POST_MEMSET(val) \
+ mr r3, r11; \
+ li r4, val; \
+ mr r5, r12; \
+ bl cache_post_memset
+
+#define CACHE_POST_CHECK() \
+ mr r3, r11; \
+ mr r4, r12; \
+ bl cache_post_check; \
+ mr r13, r3
+
+/*
+ * Write and read 0xff pattern with caching enabled.
+ */
+ .global cache_post_test1
+cache_post_test1:
+ mflr r9
+ mr r10, r3 /* tlb */
+ mr r11, r4 /* p */
+ mr r12, r5 /* size */
+
+ CACHE_POST_WB()
+ CACHE_POST_DINVALIDATE()
+
+ /* Write the negative pattern to the test area */
+ CACHE_POST_MEMSET(0xff)
+
+ /* Read the test area */
+ CACHE_POST_CHECK()
+
+ CACHE_POST_DINVALIDATE()
+ CACHE_POST_DISABLE()
+
+ mr r3, r13
+ mtlr r9
+ blr
+
+/*
+ * Write zeroes with caching enabled.
+ * Write 0xff pattern with caching disabled.
+ * Read 0xff pattern with caching enabled.
+ */
+ .global cache_post_test2
+cache_post_test2:
+ mflr r9
+ mr r10, r3 /* tlb */
+ mr r11, r4 /* p */
+ mr r12, r5 /* size */
+
+ CACHE_POST_WB()
+ CACHE_POST_DINVALIDATE()
+
+ /* Write the zero pattern to the test area */
+ CACHE_POST_MEMSET(0)
+
+ CACHE_POST_DINVALIDATE()
+ CACHE_POST_DISABLE()
+
+ /* Write the negative pattern to the test area */
+ CACHE_POST_MEMSET(0xff)
+
+ CACHE_POST_WB()
+
+ /* Read the test area */
+ CACHE_POST_CHECK()
+
+ CACHE_POST_DINVALIDATE()
+ CACHE_POST_DISABLE()
+
+ mr r3, r13
+ mtlr r9
+ blr
+
+/*
+ * Write-through mode test.
+ * Write zeroes, store the cache, write 0xff pattern.
+ * Invalidate the cache.
+ * Check that 0xff pattern is read.
+ */
+ .global cache_post_test3
+cache_post_test3:
+ mflr r9
+ mr r10, r3 /* tlb */
+ mr r11, r4 /* p */
+ mr r12, r5 /* size */
+
+ CACHE_POST_WT()
+ CACHE_POST_DINVALIDATE()
+
+ /* Cache the test area */
+ CACHE_POST_DTOUCH()
+
+ /* Write the zero pattern to the test area */
+ CACHE_POST_MEMSET(0)
+
+ CACHE_POST_DSTORE()
+
+ /* Write the negative pattern to the test area */
+ CACHE_POST_MEMSET(0xff)
+
+ CACHE_POST_DINVALIDATE()
+ CACHE_POST_DISABLE()
+
+ /* Read the test area */
+ CACHE_POST_CHECK()
+
+ mr r3, r13
+ mtlr r9
+ blr
+
+/*
+ * Write-back mode test.
+ * Write 0xff pattern, store the cache, write zeroes.
+ * Invalidate the cache.
+ * Check that 0xff pattern is read.
+ */
+ .global cache_post_test4
+cache_post_test4:
+ mflr r9
+ mr r10, r3 /* tlb */
+ mr r11, r4 /* p */
+ mr r12, r5 /* size */
+
+ CACHE_POST_WB()
+ CACHE_POST_DINVALIDATE()
+
+ /* Cache the test area */
+ CACHE_POST_DTOUCH()
+
+ /* Write the negative pattern to the test area */
+ CACHE_POST_MEMSET(0xff)
+
+ CACHE_POST_DSTORE()
+
+ /* Write the zero pattern to the test area */
+ CACHE_POST_MEMSET(0)
+
+ CACHE_POST_DINVALIDATE()
+ CACHE_POST_DISABLE()
+
+ /* Read the test area */
+ CACHE_POST_CHECK()
+
+ mr r3, r13
+ mtlr r9
+ blr
+
+/*
+ * Load the test instructions into the instruction cache.
+ * Replace the test instructions.
+ * Check that the original instructions are executed.
+ */
+ .global cache_post_test5
+cache_post_test5:
+ mflr r9
+ mr r10, r3 /* tlb */
+ mr r11, r4 /* p */
+ mr r12, r5 /* size */
+
+ CACHE_POST_WT()
+ CACHE_POST_IINVALIDATE()
+
+ /* Compute r13 = cache_post_test_inst */
+ bl cache_post_test5_reloc
+cache_post_test5_reloc:
+ mflr r13
+ lis r0, (cache_post_test_inst - cache_post_test5_reloc)@h
+ ori r0, r0, (cache_post_test_inst - cache_post_test5_reloc)@l
+ add r13, r13, r0
+
+ /* Copy the test instructions to the test area */
+ lwz r0, 0(r13)
+ stw r0, 0(r11)
+ lwz r0, 8(r13)
+ stw r0, 4(r11)
+ sync
+
+ /* Invalidate the cache line */
+ icbi r0, r11
+ sync
+ isync
+
+ /* Execute the test instructions */
+ mtlr r11
+ blrl
+
+ /* Replace the test instruction */
+ lwz r0, 4(r13)
+ stw r0, 0(r11)
+ sync
+
+ /* Do not invalidate the cache line */
+ isync
+
+ /* Execute the test instructions */
+ mtlr r11
+ blrl
+ mr r13, r3
+
+ CACHE_POST_IINVALIDATE()
+ CACHE_POST_DINVALIDATE()
+ CACHE_POST_DISABLE()
+
+ mr r3, r13
+ mtlr r9
+ blr
+
+/*
+ * Load the test instructions into the instruction cache.
+ * Replace the test instructions and invalidate the cache.
+ * Check that the replaced instructions are executed.
+ */
+ .global cache_post_test6
+cache_post_test6:
+ mflr r9
+ mr r10, r3 /* tlb */
+ mr r11, r4 /* p */
+ mr r12, r5 /* size */
+
+ CACHE_POST_WT()
+ CACHE_POST_IINVALIDATE()
+
+ /* Compute r13 = cache_post_test_inst */
+ bl cache_post_test6_reloc
+cache_post_test6_reloc:
+ mflr r13
+ lis r0, (cache_post_test_inst - cache_post_test6_reloc)@h
+ ori r0, r0, (cache_post_test_inst - cache_post_test6_reloc)@l
+ add r13, r13, r0
+
+ /* Copy the test instructions to the test area */
+ lwz r0, 4(r13)
+ stw r0, 0(r11)
+ lwz r0, 8(r13)
+ stw r0, 4(r11)
+ sync
+
+ /* Invalidate the cache line */
+ icbi r0, r11
+ sync
+ isync
+
+ /* Execute the test instructions */
+ mtlr r11
+ blrl
+
+ /* Replace the test instruction */
+ lwz r0, 0(r13)
+ stw r0, 0(r11)
+ sync
+
+ /* Invalidate the cache line */
+ icbi r0, r11
+ sync
+ isync
+
+ /* Execute the test instructions */
+ mtlr r11
+ blrl
+ mr r13, r3
+
+ CACHE_POST_IINVALIDATE()
+ CACHE_POST_DINVALIDATE()
+ CACHE_POST_DISABLE()
+
+ mr r3, r13
+ mtlr r9
+ blr
+
+/* Test instructions.
+ */
+cache_post_test_inst:
+ li r3, 0
+ li r3, -1
+ blr
+
+#endif /* CONFIG_POST & CFG_POST_CACHE */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
new file mode 100644
index 0000000..391c815
--- /dev/null
+++ b/post/cpu/ppc4xx/ether.c
@@ -0,0 +1,395 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Ethernet test
+ *
+ * The Ethernet Media Access Controllers (EMAC) are tested in the
+ * internal loopback mode.
+ * The controllers are configured accordingly and several packets
+ * are transmitted. The configurable test parameters are:
+ * MIN_PACKET_LENGTH - minimum size of packet to transmit
+ * MAX_PACKET_LENGTH - maximum size of packet to transmit
+ * TEST_NUM - number of tests
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_ETHER
+
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <405_mal.h>
+#include <ppc4xx_enet.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
+#endif
+
+#define MIN_PACKET_LENGTH 64
+#define MAX_PACKET_LENGTH 256
+#define TEST_NUM 1
+
+static volatile mal_desc_t tx __cacheline_aligned;
+static volatile mal_desc_t rx __cacheline_aligned;
+static char *tx_buf;
+static char *rx_buf;
+
+static void ether_post_init (int devnum, int hw_addr)
+{
+ int i;
+ unsigned mode_reg;
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ sys_info_t sysinfo;
+#endif
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
+ unsigned long mfr;
+#endif
+
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ /* Need to get the OPB frequency so we can access the PHY */
+ get_sys_info (&sysinfo);
+#endif
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ /* provide clocks for EMAC internal loopback */
+ mfsdr (sdr_mfr, mfr);
+ mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
+ mtsdr (sdr_mfr, mfr);
+ sync ();
+#endif
+ /* reset emac */
+ out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
+ sync ();
+
+ for (i = 0;; i++) {
+ if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST))
+ break;
+ if (i >= 1000) {
+ printf ("Timeout resetting EMAC\n");
+ break;
+ }
+ udelay (1000);
+ }
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ /* Whack the M1 register */
+ mode_reg = 0x0;
+ if (sysinfo.freqOPB <= 50000000);
+ else if (sysinfo.freqOPB <= 66666667)
+ mode_reg |= EMAC_M1_OBCI_66;
+ else if (sysinfo.freqOPB <= 83333333)
+ mode_reg |= EMAC_M1_OBCI_83;
+ else if (sysinfo.freqOPB <= 100000000)
+ mode_reg |= EMAC_M1_OBCI_100;
+ else
+ mode_reg |= EMAC_M1_OBCI_GT100;
+
+ out32 (EMAC_M1 + hw_addr, mode_reg);
+
+#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
+
+ /* set the Mal configuration reg */
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
+ MAL_CR_PLBLT_DEFAULT | 0x00330000);
+#else
+ mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
+ /* Errata 1.12: MAL_1 -- Disable MAL bursting */
+ if (get_pvr() == PVR_440GP_RB) {
+ mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB);
+ }
+#endif
+ /* setup buffer descriptors */
+ tx.ctrl = MAL_TX_CTRL_WRAP;
+ tx.data_len = 0;
+ tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf);
+
+ rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY;
+ rx.data_len = 0;
+ rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf);
+
+ switch (devnum) {
+ case 1:
+ /* setup MAL tx & rx channel pointers */
+#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
+ mtdcr (maltxctp2r, &tx);
+#else
+ mtdcr (maltxctp1r, &tx);
+#endif
+#if defined(CONFIG_440)
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (malrxbattr, 0x0);
+#endif
+ mtdcr (malrxctp1r, &rx);
+ /* set RX buffer size */
+ mtdcr (malrcbs1, PKTSIZE_ALIGN / 16);
+ break;
+ case 0:
+ default:
+ /* setup MAL tx & rx channel pointers */
+#if defined(CONFIG_440)
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (malrxbattr, 0x0);
+#endif
+ mtdcr (maltxctp0r, &tx);
+ mtdcr (malrxctp0r, &rx);
+ /* set RX buffer size */
+ mtdcr (malrcbs0, PKTSIZE_ALIGN / 16);
+ break;
+ }
+
+ /* Enable MAL transmit and receive channels */
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2)));
+#else
+ mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum));
+#endif
+ mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum));
+
+ /* set internal loopback mode */
+ out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE |
+ EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+ EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+ in32 (EMAC_M1));
+
+ /* set transmit enable & receive enable */
+ out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
+
+ /* enable broadcast address */
+ out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE);
+
+ /* set transmit request threshold register */
+ out32 (EMAC_TRTR + hw_addr, 0x18000000); /* 256 byte threshold */
+
+ /* set receive low/high water mark register */
+#if defined(CONFIG_440)
+ /* 440s has a 64 byte burst length */
+ out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000);
+#else
+ /* 405s have a 16 byte burst length */
+ out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000);
+#endif /* defined(CONFIG_440) */
+ out32 (EMAC_TXM1 + hw_addr, 0xf8640000);
+
+ /* Set fifo limit entry in tx mode 0 */
+ out32 (EMAC_TXM0 + hw_addr, 0x00000003);
+ /* Frame gap set */
+ out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008);
+ sync ();
+}
+
+static void ether_post_halt (int devnum, int hw_addr)
+{
+ int i = 0;
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ unsigned long mfr;
+#endif
+
+ /* 1st reset MAL channel */
+ /* Note: writing a 0 to a channel has no effect */
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2));
+#else
+ mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum);
+#endif
+ mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum);
+
+ /* wait for reset */
+ while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) {
+ if (i++ >= 1000)
+ break;
+ udelay (1000);
+ }
+ /* emac reset */
+ out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ /* remove clocks for EMAC internal loopback */
+ mfsdr (sdr_mfr, mfr);
+ mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
+ mtsdr (sdr_mfr, mfr);
+#endif
+}
+
+static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
+{
+ int i = 0;
+
+ while (tx.ctrl & MAL_TX_CTRL_READY) {
+ if (i++ > 100) {
+ printf ("TX timeout\n");
+ return;
+ }
+ udelay (1000);
+ }
+ tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST |
+ EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP;
+ tx.data_len = length;
+ memcpy (tx.data_ptr, packet, length);
+ sync ();
+
+ out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0);
+ sync ();
+}
+
+static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length)
+{
+ int length;
+ int i = 0;
+
+ while (rx.ctrl & MAL_RX_CTRL_EMPTY) {
+ if (i++ > 100) {
+ printf ("RX timeout\n");
+ return 0;
+ }
+ udelay (1000);
+ }
+ length = rx.data_len - 4;
+ if (length <= max_length)
+ memcpy(packet, rx.data_ptr, length);
+ sync ();
+
+ rx.ctrl |= MAL_RX_CTRL_EMPTY;
+ sync ();
+
+ return length;
+}
+
+ /*
+ * Test routines
+ */
+
+static void packet_fill (char *packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ /* set up ethernet header */
+ memset (packet, 0xff, 14);
+
+ for (i = 14; i < length; i++) {
+ packet[i] = c++;
+ }
+}
+
+static int packet_check (char *packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ for (i = 14; i < length; i++) {
+ if (packet[i] != c++)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int test_ctlr (int devnum, int hw_addr)
+{
+ int res = -1;
+ char packet_send[MAX_PACKET_LENGTH];
+ char packet_recv[MAX_PACKET_LENGTH];
+ int length;
+ int i;
+ int l;
+
+ ether_post_init (devnum, hw_addr);
+
+ for (i = 0; i < TEST_NUM; i++) {
+ for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
+ packet_fill (packet_send, l);
+
+ ether_post_send (devnum, hw_addr, packet_send, l);
+
+ length = ether_post_recv (devnum, hw_addr, packet_recv,
+ sizeof (packet_recv));
+
+ if (length != l || packet_check (packet_recv, length) < 0) {
+ goto Done;
+ }
+ }
+ }
+
+ res = 0;
+
+Done:
+
+ ether_post_halt (devnum, hw_addr);
+
+ if (res != 0) {
+ post_log ("EMAC%d test failed\n", devnum);
+ }
+
+ return res;
+}
+
+int ether_post_test (int flags)
+{
+ int res = 0;
+
+ /* Allocate tx & rx packet buffers */
+ tx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
+ rx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
+
+ if (!tx_buf || !rx_buf) {
+ printf ("Failed to allocate packet buffers\n");
+ res = -1;
+ goto out_free;
+ }
+
+ /* EMAC0 */
+ if (test_ctlr (0, 0))
+ res = -1;
+
+ /* EMAC1 */
+ if (test_ctlr (1, 0x100))
+ res = -1;
+
+out_free:
+ free (tx_buf);
+ free (rx_buf);
+
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_ETHER */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c
new file mode 100644
index 0000000..27e9ed0
--- /dev/null
+++ b/post/cpu/ppc4xx/fpu.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Sergei Poselenov <sposelenov@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_POST
+#if defined(CONFIG_440EP) || \
+ defined(CONFIG_440EPX)
+
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+
+int fpu_status(void)
+{
+ if (mfspr(ccr0) & CCR0_DAPUIB)
+ return 0; /* Disabled */
+ else
+ return 1; /* Enabled */
+}
+
+
+void fpu_disable(void)
+{
+ mtspr(ccr0, mfspr(ccr0) | CCR0_DAPUIB);
+ mtmsr(mfmsr() & ~MSR_FP);
+}
+
+
+void fpu_enable(void)
+{
+ mtspr(ccr0, mfspr(ccr0) & ~CCR0_DAPUIB);
+ mtmsr(mfmsr() | MSR_FP);
+}
+
+#endif
+#endif /* CONFIG_POST */
diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c
new file mode 100644
index 0000000..3e74634
--- /dev/null
+++ b/post/cpu/ppc4xx/spr.c
@@ -0,0 +1,182 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * SPR test
+ *
+ * The test checks the contents of Special Purpose Registers (SPR) listed
+ * in the spr_test_list array below.
+ * Each SPR value is read using mfspr instruction, some bits are masked
+ * according to the table and the resulting value is compared to the
+ * corresponding table value.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_SPR
+
+#include <asm/processor.h>
+
+static struct {
+ int number;
+ char * name;
+ unsigned long mask;
+ unsigned long value;
+} spr_test_list [] = {
+ /* Standard Special-Purpose Registers */
+
+ {0x001, "XER", 0x00000000, 0x00000000},
+ {0x008, "LR", 0x00000000, 0x00000000},
+ {0x009, "CTR", 0x00000000, 0x00000000},
+ {0x016, "DEC", 0x00000000, 0x00000000},
+ {0x01a, "SRR0", 0x00000000, 0x00000000},
+ {0x01b, "SRR1", 0x00000000, 0x00000000},
+ {0x110, "SPRG0", 0x00000000, 0x00000000},
+ {0x111, "SPRG1", 0x00000000, 0x00000000},
+ {0x112, "SPRG2", 0x00000000, 0x00000000},
+ {0x113, "SPRG3", 0x00000000, 0x00000000},
+ {0x11f, "PVR", 0x00000000, 0x00000000},
+
+ /* Additional Special-Purpose Registers.
+ * The values must match the initialization
+ * values from cpu/ppc4xx/start.S
+ */
+ {0x30, "PID", 0x00000000, 0x00000000},
+ {0x3a, "CSRR0", 0x00000000, 0x00000000},
+ {0x3b, "CSRR1", 0x00000000, 0x00000000},
+ {0x3d, "DEAR", 0x00000000, 0x00000000},
+ {0x3e, "ESR", 0x00000000, 0x00000000},
+ {0x3f, "IVPR", 0xffff0000, 0x00000000},
+ {0x100, "USPRG0", 0x00000000, 0x00000000},
+ {0x104, "SPRG4", 0x00000000, 0x00000000},
+ {0x105, "SPRG5", 0x00000000, 0x00000000},
+ {0x106, "SPRG6", 0x00000000, 0x00000000},
+ {0x107, "SPRG7", 0x00000000, 0x00000000},
+ {0x10c, "TBL", 0x00000000, 0x00000000},
+ {0x10d, "TBU", 0x00000000, 0x00000000},
+ {0x11e, "PIR", 0x0000000f, 0x00000000},
+ {0x130, "DBSR", 0x00000000, 0x00000000},
+ {0x134, "DBCR0", 0x00000000, 0x00000000},
+ {0x135, "DBCR1", 0x00000000, 0x00000000},
+ {0x136, "DBCR2", 0x00000000, 0x00000000},
+ {0x138, "IAC1", 0x00000000, 0x00000000},
+ {0x139, "IAC2", 0x00000000, 0x00000000},
+ {0x13a, "IAC3", 0x00000000, 0x00000000},
+ {0x13b, "IAC4", 0x00000000, 0x00000000},
+ {0x13c, "DAC1", 0x00000000, 0x00000000},
+ {0x13d, "DAC2", 0x00000000, 0x00000000},
+ {0x13e, "DVC1", 0x00000000, 0x00000000},
+ {0x13f, "DVC2", 0x00000000, 0x00000000},
+ {0x150, "TSR", 0x00000000, 0x00000000},
+ {0x154, "TCR", 0x00000000, 0x00000000},
+ {0x190, "IVOR0", 0x0000fff0, 0x00000100},
+ {0x191, "IVOR1", 0x0000fff0, 0x00000200},
+ {0x192, "IVOR2", 0x0000fff0, 0x00000300},
+ {0x193, "IVOR3", 0x0000fff0, 0x00000400},
+ {0x194, "IVOR4", 0x0000fff0, 0x00000500},
+ {0x195, "IVOR5", 0x0000fff0, 0x00000600},
+ {0x196, "IVOR6", 0x0000fff0, 0x00000700},
+ {0x197, "IVOR7", 0x0000fff0, 0x00000800},
+ {0x198, "IVOR8", 0x0000fff0, 0x00000c00},
+ {0x199, "IVOR9", 0x00000000, 0x00000000},
+ {0x19a, "IVOR10", 0x0000fff0, 0x00000900},
+ {0x19b, "IVOR11", 0x00000000, 0x00000000},
+ {0x19c, "IVOR12", 0x00000000, 0x00000000},
+ {0x19d, "IVOR13", 0x0000fff0, 0x00001300},
+ {0x19e, "IVOR14", 0x0000fff0, 0x00001400},
+ {0x19f, "IVOR15", 0x0000fff0, 0x00002000},
+ {0x23a, "MCSRR0", 0x00000000, 0x00000000},
+ {0x23b, "MCSRR1", 0x00000000, 0x00000000},
+ {0x23c, "MCSR", 0x00000000, 0x00000000},
+ {0x370, "INV0", 0x00000000, 0x00000000},
+ {0x371, "INV1", 0x00000000, 0x00000000},
+ {0x372, "INV2", 0x00000000, 0x00000000},
+ {0x373, "INV3", 0x00000000, 0x00000000},
+ {0x374, "ITV0", 0x00000000, 0x00000000},
+ {0x375, "ITV1", 0x00000000, 0x00000000},
+ {0x376, "ITV2", 0x00000000, 0x00000000},
+ {0x377, "ITV3", 0x00000000, 0x00000000},
+ {0x378, "CCR1", 0x00000000, 0x00000000},
+ {0x390, "DNV0", 0x00000000, 0x00000000},
+ {0x391, "DNV1", 0x00000000, 0x00000000},
+ {0x392, "DNV2", 0x00000000, 0x00000000},
+ {0x393, "DNV3", 0x00000000, 0x00000000},
+ {0x394, "DTV0", 0x00000000, 0x00000000},
+ {0x395, "DTV1", 0x00000000, 0x00000000},
+ {0x396, "DTV2", 0x00000000, 0x00000000},
+ {0x397, "DTV3", 0x00000000, 0x00000000},
+ {0x398, "DVLIM", 0x0fc1f83f, 0x0001f800},
+ {0x399, "IVLIM", 0x0fc1f83f, 0x0001f800},
+ {0x39b, "RSTCFG", 0x00000000, 0x00000000},
+ {0x39c, "DCDBTRL", 0x00000000, 0x00000000},
+ {0x39d, "DCDBTRH", 0x00000000, 0x00000000},
+ {0x39e, "ICDBTRL", 0x00000000, 0x00000000},
+ {0x39f, "ICDBTRH", 0x00000000, 0x00000000},
+ {0x3b2, "MMUCR", 0x00000000, 0x00000000},
+ {0x3b3, "CCR0", 0x00000000, 0x00000000},
+ {0x3d3, "ICDBDR", 0x00000000, 0x00000000},
+ {0x3f3, "DBDR", 0x00000000, 0x00000000},
+};
+
+static int spr_test_list_size =
+ sizeof (spr_test_list) / sizeof (spr_test_list[0]);
+
+int spr_post_test (int flags)
+{
+ int ret = 0;
+ int i;
+
+ unsigned long code[] = {
+ 0x7c6002a6, /* mfspr r3,SPR */
+ 0x4e800020 /* blr */
+ };
+ unsigned long (*get_spr) (void) = (void *) code;
+
+ for (i = 0; i < spr_test_list_size; i++) {
+ int num = spr_test_list[i].number;
+
+ /* mfspr r3,num */
+ code[0] = 0x7c6002a6 | ((num & 0x1F) << 16) | ((num & 0x3E0) << 6);
+
+ asm volatile ("isync");
+
+ if ((get_spr () & spr_test_list[i].mask) !=
+ (spr_test_list[i].value & spr_test_list[i].mask)) {
+ post_log ("The value of %s special register "
+ "is incorrect: 0x%08X\n",
+ spr_test_list[i].name, get_spr ());
+ ret = -1;
+ }
+ }
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CFG_POST_SPR */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
new file mode 100644
index 0000000..b047d42
--- /dev/null
+++ b/post/cpu/ppc4xx/uart.c
@@ -0,0 +1,215 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * UART test
+ *
+ * The controllers are configured to loopback mode and several
+ * characters are transmitted.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_UART
+
+#include <asm/processor.h>
+#include <serial.h>
+
+#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
+#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
+#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000500
+#define UART3_BASE CFG_PERIPHERAL_BASE + 0x00000600
+
+#define CR0_MASK 0xdfffffff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR sdr_uart0
+#define UART1_SDR sdr_uart1
+#define UART2_SDR sdr_uart2
+#define UART3_SDR sdr_uart3
+#define MFREG(a, d) mfsdr(a, d)
+#define MTREG(a, d) mtsdr(a, d)
+
+#define UART_RBR 0x00
+#define UART_THR 0x00
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/*
+ Line Status Register.
+*/
+#define asyncLSRDataReady1 0x01
+#define asyncLSROverrunError1 0x02
+#define asyncLSRParityError1 0x04
+#define asyncLSRFramingError1 0x08
+#define asyncLSRBreakInterrupt1 0x10
+#define asyncLSRTxHoldEmpty1 0x20
+#define asyncLSRTxShiftEmpty1 0x40
+#define asyncLSRRxFifoError1 0x80
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int uart_post_init (unsigned long dev_base)
+{
+ unsigned long reg;
+ unsigned long udiv;
+ unsigned short bdiv;
+ volatile char val;
+#ifdef CFG_EXT_SERIAL_CLOCK
+ unsigned long tmp;
+#endif
+ int i;
+
+ for (i = 0; i < 3500; i++) {
+ if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+ break;
+ udelay (100);
+ }
+ MFREG(UART0_SDR, reg);
+ reg &= ~CR0_MASK;
+
+#ifdef CFG_EXT_SERIAL_CLOCK
+ reg |= CR0_EXTCLK_ENA;
+ udiv = 1;
+ tmp = gd->baudrate * 16;
+ bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+ /* For 440, the cpu clock is on divider chain A, UART on divider
+ * chain B ... so cpu clock is irrelevant. Get the "optimized"
+ * values that are subject to the 1/2 opb clock constraint
+ */
+ serial_divs (gd->baudrate, &udiv, &bdiv);
+#endif
+
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ MTREG(UART0_SDR, reg);
+#if defined(UART1_SDR)
+ MTREG(UART1_SDR, reg);
+#endif
+#if defined(UART2_SDR)
+ MTREG(UART2_SDR, reg);
+#endif
+#if defined(UART3_SDR)
+ MTREG(UART3_SDR, reg);
+#endif
+
+ out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */
+ out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(dev_base + UART_FCR, 0x00); /* disable FIFO */
+ out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */
+ val = in8(dev_base + UART_LSR); /* clear line status */
+ val = in8(dev_base + UART_RBR); /* read receive buffer */
+ out8(dev_base + UART_SCR, 0x00); /* set scratchpad */
+ out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */
+
+ return 0;
+}
+
+static void uart_post_putc (unsigned long dev_base, char c)
+{
+ int i;
+
+ out8 (dev_base + UART_THR, c); /* put character out */
+
+ /* Wait for transfer completion */
+ for (i = 0; i < 3500; i++) {
+ if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+ break;
+ udelay (100);
+ }
+}
+
+static int uart_post_getc (unsigned long dev_base)
+{
+ int i;
+
+ /* Wait for character available */
+ for (i = 0; i < 3500; i++) {
+ if (in8 (dev_base + UART_LSR) & asyncLSRDataReady1)
+ break;
+ udelay (100);
+ }
+ return 0xff & in8 (dev_base + UART_RBR);
+}
+
+static int test_ctlr (unsigned long dev_base, int index)
+{
+ int res = -1;
+ char test_str[] = "*** UART Test String ***\r\n";
+ int i;
+
+ uart_post_init (dev_base);
+
+ for (i = 0; i < sizeof (test_str) - 1; i++) {
+ uart_post_putc (dev_base, test_str[i]);
+ if (uart_post_getc (dev_base) != test_str[i])
+ goto done;
+ }
+ res = 0;
+done:
+ if (res)
+ post_log ("uart%d test failed\n", index);
+
+ return res;
+}
+
+int uart_post_test (int flags)
+{
+ int i, res = 0;
+ static unsigned long base[] = {
+ UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE
+ };
+
+ for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
+ if (test_ctlr (base[i], i))
+ res = -1;
+ }
+ serial_reinit_all ();
+
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_UART */
+#endif /* CONFIG_POST */
diff --git a/post/cpu/ppc4xx/watchdog.c b/post/cpu/ppc4xx/watchdog.c
new file mode 100644
index 0000000..bd4f4c9
--- /dev/null
+++ b/post/cpu/ppc4xx/watchdog.c
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Watchdog test
+ *
+ * The test verifies the watchdog timer operation.
+ * On the first iteration, the test routine disables interrupts and
+ * makes a 10-second delay. If the system does not reboot during this delay,
+ * the watchdog timer is not operational and the test fails. If the system
+ * reboots, on the second iteration the test routine reports a success.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_WATCHDOG
+
+#include <watchdog.h>
+
+int watchdog_post_test (int flags)
+{
+ if (flags & POST_REBOOT) {
+ /* Test passed */
+ return 0;
+ }
+ else {
+ /* 10-second delay */
+ int ints = disable_interrupts ();
+ ulong base = post_time_ms (0);
+
+ while (post_time_ms (base) < 10000)
+ ;
+ if (ints)
+ enable_interrupts ();
+
+ /*
+ * If we have reached this point, the watchdog timer
+ * does not work
+ */
+ return -1;
+ }
+}
+
+#endif /* CONFIG_POST & CFG_POST_WATCHDOG */
+#endif /* CONFIG_POST */
diff --git a/post/drivers/Makefile b/post/drivers/Makefile
index 068fa98..cb2f1de 100644
--- a/post/drivers/Makefile
+++ b/post/drivers/Makefile
@@ -26,6 +26,6 @@
LIB = libpostdrivers.a
-COBJS = cache.o i2c.o memory.o rtc.o
+COBJS = i2c.o memory.o rtc.o
include $(TOPDIR)/post/rules.mk
diff --git a/post/lib_ppc/Makefile b/post/lib_ppc/Makefile
index 14354a0..9f1b329 100644
--- a/post/lib_ppc/Makefile
+++ b/post/lib_ppc/Makefile
@@ -21,6 +21,7 @@
# MA 02111-1307 USA
#
+SUBDIRS = fpu
LIB = libpostppc.a
diff --git a/post/lib_ppc/asm.S b/post/lib_ppc/asm.S
index a0815a4..5e72b34 100644
--- a/post/lib_ppc/asm.S
+++ b/post/lib_ppc/asm.S
@@ -34,6 +34,7 @@
/* void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2); */
.global cpu_post_exec_02
cpu_post_exec_02:
+ isync
mflr r0
stwu r0, -4(r1)
@@ -56,6 +57,7 @@
/* void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3, ulong op4); */
.global cpu_post_exec_04
cpu_post_exec_04:
+ isync
mflr r0
stwu r0, -4(r1)
@@ -80,6 +82,7 @@
/* void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2); */
.global cpu_post_exec_12
cpu_post_exec_12:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -100,6 +103,7 @@
/* void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1); */
.global cpu_post_exec_11
cpu_post_exec_11:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -119,6 +123,7 @@
/* void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1); */
.global cpu_post_exec_21
cpu_post_exec_21:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -148,6 +153,7 @@
ulong op2); */
.global cpu_post_exec_22
cpu_post_exec_22:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -177,6 +183,7 @@
/* void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3); */
.global cpu_post_exec_12w
cpu_post_exec_12w:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -198,6 +205,7 @@
/* void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2); */
.global cpu_post_exec_11w
cpu_post_exec_11w:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -218,6 +226,7 @@
/* void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3); */
.global cpu_post_exec_22w
cpu_post_exec_22w:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -241,6 +250,7 @@
/* void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2); */
.global cpu_post_exec_21w
cpu_post_exec_21w:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -263,6 +273,7 @@
/* void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3); */
.global cpu_post_exec_21x
cpu_post_exec_21x:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
@@ -286,6 +297,7 @@
ulong cr); */
.global cpu_post_exec_31
cpu_post_exec_31:
+ isync
mflr r0
stwu r0, -4(r1)
stwu r4, -4(r1)
diff --git a/post/lib_ppc/b.c b/post/lib_ppc/b.c
index b4b17c8..6e276c4 100644
--- a/post/lib_ppc/b.c
+++ b/post/lib_ppc/b.c
@@ -49,7 +49,7 @@
ulong cr);
static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi,
- int pjump, int dec, int link, ulong pctr, ulong cr)
+ int pjump, int decr, int link, ulong pctr, ulong cr)
{
int ret = 0;
ulong lr = 0;
@@ -77,7 +77,7 @@
ret = pjump == jump ? 0 : -1;
if (ret == 0)
{
- if (dec)
+ if (decr)
ret = pctr == ctr + 1 ? 0 : -1;
else
ret = pctr == ctr ? 0 : -1;
@@ -163,7 +163,7 @@
{
for (ctr = 1; ctr <= 2 && ret == 0; ctr++)
{
- int dec = cd < 2;
+ int decr = cd < 2;
int cr = cond ? 0x80000000 : 0x00000000;
int jumpc = cc >= 2 ||
(cc == 0 && !cond) ||
@@ -174,7 +174,7 @@
int jump = jumpc && jumpd;
ret = cpu_post_test_bc (link ? OP_BCL : OP_BC,
- (cc << 3) + (cd << 1), 0, jump, dec, link,
+ (cc << 3) + (cd << 1), 0, jump, decr, link,
ctr, cr);
if (ret != 0)
diff --git a/post/lib_ppc/fpu/20001122-1.c b/post/lib_ppc/fpu/20001122-1.c
new file mode 100644
index 0000000..f689b82
--- /dev/null
+++ b/post/lib_ppc/fpu/20001122-1.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_FPU
+
+int fpu_post_test_math1 (void)
+{
+ volatile double a, *p;
+ double c, d;
+ volatile double b;
+
+ d = 1.0;
+ p = &b;
+
+ do
+ {
+ c = d;
+ d = c * 0.5;
+ b = 1 + d;
+ } while (b != 1.0);
+
+ a = 1.0 + c;
+
+ if (a == 1.0) {
+ post_log ("Error in FPU math1 test\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/fpu/20010114-2.c b/post/lib_ppc/fpu/20010114-2.c
new file mode 100644
index 0000000..6e60507
--- /dev/null
+++ b/post/lib_ppc/fpu/20010114-2.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_FPU
+
+static float rintf (float x)
+{
+ volatile float TWO23 = 8388608.0;
+
+ if (__builtin_fabs (x) < TWO23)
+ {
+ if (x > 0.0)
+ {
+ x += TWO23;
+ x -= TWO23;
+ }
+ else if (x < 0.0)
+ {
+ x = TWO23 - x;
+ x = -(x - TWO23);
+ }
+ }
+
+ return x;
+}
+
+int fpu_post_test_math2 (void)
+{
+ if (rintf (-1.5) != -2.0) {
+ post_log ("Error in FPU math2 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/fpu/20010226-1.c b/post/lib_ppc/fpu/20010226-1.c
new file mode 100644
index 0000000..b2c47e3
--- /dev/null
+++ b/post/lib_ppc/fpu/20010226-1.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_FPU
+
+int fpu_post_test_math3 (void)
+{
+ volatile long double dfrom = 1.1;
+ volatile long double m1;
+ volatile long double m2;
+ volatile unsigned long mant_long;
+
+ m1 = dfrom / 2.0;
+ m2 = m1 * 4294967296.0;
+ mant_long = ((unsigned long) m2) & 0xffffffff;
+
+ if (mant_long != 0x8ccccccc) {
+ post_log ("Error in FPU math3 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/fpu/980619-1.c b/post/lib_ppc/fpu/980619-1.c
new file mode 100644
index 0000000..990aa0c
--- /dev/null
+++ b/post/lib_ppc/fpu/980619-1.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_FPU
+
+int fpu_post_test_math4 (void)
+{
+ volatile float reale = 1.0f;
+ volatile float oneplus;
+ int i;
+
+ if (sizeof (float) != 4)
+ return 0;
+
+ for (i = 0; ; i++)
+ {
+ oneplus = 1.0f + reale;
+ if (oneplus == 1.0f)
+ break;
+ reale = reale / 2.0f;
+ }
+ /* Assumes ieee754 accurate arithmetic above. */
+ if (i != 24) {
+ post_log ("Error in FPU math4 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/fpu/Makefile b/post/lib_ppc/fpu/Makefile
new file mode 100644
index 0000000..82646c8
--- /dev/null
+++ b/post/lib_ppc/fpu/Makefile
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+
+LIB = libpostppcfpu.a
+
+COBJS += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o
+COBJS += acc1.o compare-fp-1.o mul-subnormal-single-1.o
+
+include $(TOPDIR)/post/rules.mk
+
+CFLAGS += -mhard-float -fkeep-inline-functions
diff --git a/post/lib_ppc/fpu/acc1.c b/post/lib_ppc/fpu/acc1.c
new file mode 100644
index 0000000..4cecbf6
--- /dev/null
+++ b/post/lib_ppc/fpu/acc1.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_FPU
+
+static double func (const double *array)
+{
+ double d = *array;
+
+ if (d == 0.0)
+ return d;
+ else
+ return d + func (array + 1);
+}
+
+int fpu_post_test_math5 (void)
+{
+ double values[] = { 0.1e-100, 1.0, -1.0, 0.0 };
+
+ if (func (values) != 0.1e-100) {
+ post_log ("Error in FPU math5 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/fpu/compare-fp-1.c b/post/lib_ppc/fpu/compare-fp-1.c
new file mode 100644
index 0000000..d866ad5
--- /dev/null
+++ b/post/lib_ppc/fpu/compare-fp-1.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * Test for correctness of composite floating-point comparisons.
+ * Written by Paolo Bonzini, 26th May 2004.
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_FPU
+
+static int failed;
+
+#define TEST(c) if ((c) != ok) failed++
+#define ORD(a, b) (!__builtin_isunordered ((a), (b)))
+#define UNORD(a, b) (__builtin_isunordered ((a), (b)))
+#define UNEQ(a, b) (__builtin_isunordered ((a), (b)) || ((a) == (b)))
+#define UNLT(a, b) (__builtin_isunordered ((a), (b)) || ((a) < (b)))
+#define UNLE(a, b) (__builtin_isunordered ((a), (b)) || ((a) <= (b)))
+#define UNGT(a, b) (__builtin_isunordered ((a), (b)) || ((a) > (b)))
+#define UNGE(a, b) (__builtin_isunordered ((a), (b)) || ((a) >= (b)))
+#define LTGT(a, b) (__builtin_islessgreater ((a), (b)))
+
+static float pinf;
+static float ninf;
+static float NaN;
+
+static void iuneq (float x, float y, int ok)
+{
+ TEST (UNEQ (x, y));
+ TEST (!LTGT (x, y));
+ TEST (UNLE (x, y) && UNGE (x,y));
+}
+
+static void ieq (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNEQ (x, y));
+}
+
+static void iltgt (float x, float y, int ok)
+{
+ TEST (!UNEQ (x, y)); /* Not optimizable. */
+ TEST (LTGT (x, y)); /* Same, __builtin_islessgreater does not trap. */
+ TEST (ORD (x, y) && (UNLT (x, y) || UNGT (x,y)));
+}
+
+static void ine (float x, float y, int ok)
+{
+ TEST (UNLT (x, y) || UNGT (x, y));
+}
+
+static void iunlt (float x, float y, int ok)
+{
+ TEST (UNLT (x, y));
+ TEST (UNORD (x, y) || (x < y));
+}
+
+static void ilt (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNLT (x, y)); /* Not optimized */
+ TEST ((x <= y) && (x != y));
+ TEST ((x <= y) && (y != x));
+ TEST ((x != y) && (x <= y)); /* Not optimized */
+ TEST ((y != x) && (x <= y)); /* Not optimized */
+}
+
+static void iunle (float x, float y, int ok)
+{
+ TEST (UNLE (x, y));
+ TEST (UNORD (x, y) || (x <= y));
+}
+
+static void ile (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNLE (x, y)); /* Not optimized */
+ TEST ((x < y) || (x == y));
+ TEST ((y > x) || (x == y));
+ TEST ((x == y) || (x < y)); /* Not optimized */
+ TEST ((y == x) || (x < y)); /* Not optimized */
+}
+
+static void iungt (float x, float y, int ok)
+{
+ TEST (UNGT (x, y));
+ TEST (UNORD (x, y) || (x > y));
+}
+
+static void igt (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNGT (x, y)); /* Not optimized */
+ TEST ((x >= y) && (x != y));
+ TEST ((x >= y) && (y != x));
+ TEST ((x != y) && (x >= y)); /* Not optimized */
+ TEST ((y != x) && (x >= y)); /* Not optimized */
+}
+
+static void iunge (float x, float y, int ok)
+{
+ TEST (UNGE (x, y));
+ TEST (UNORD (x, y) || (x >= y));
+}
+
+static void ige (float x, float y, int ok)
+{
+ TEST (ORD (x, y) && UNGE (x, y)); /* Not optimized */
+ TEST ((x > y) || (x == y));
+ TEST ((y < x) || (x == y));
+ TEST ((x == y) || (x > y)); /* Not optimized */
+ TEST ((y == x) || (x > y)); /* Not optimized */
+}
+
+int fpu_post_test_math6 (void)
+{
+ pinf = __builtin_inf ();
+ ninf = -__builtin_inf ();
+ NaN = __builtin_nan ("");
+
+ iuneq (ninf, pinf, 0);
+ iuneq (NaN, NaN, 1);
+ iuneq (pinf, ninf, 0);
+ iuneq (1, 4, 0);
+ iuneq (3, 3, 1);
+ iuneq (5, 2, 0);
+
+ ieq (1, 4, 0);
+ ieq (3, 3, 1);
+ ieq (5, 2, 0);
+
+ iltgt (ninf, pinf, 1);
+ iltgt (NaN, NaN, 0);
+ iltgt (pinf, ninf, 1);
+ iltgt (1, 4, 1);
+ iltgt (3, 3, 0);
+ iltgt (5, 2, 1);
+
+ ine (1, 4, 1);
+ ine (3, 3, 0);
+ ine (5, 2, 1);
+
+ iunlt (NaN, ninf, 1);
+ iunlt (pinf, NaN, 1);
+ iunlt (pinf, ninf, 0);
+ iunlt (pinf, pinf, 0);
+ iunlt (ninf, ninf, 0);
+ iunlt (1, 4, 1);
+ iunlt (3, 3, 0);
+ iunlt (5, 2, 0);
+
+ ilt (1, 4, 1);
+ ilt (3, 3, 0);
+ ilt (5, 2, 0);
+
+ iunle (NaN, ninf, 1);
+ iunle (pinf, NaN, 1);
+ iunle (pinf, ninf, 0);
+ iunle (pinf, pinf, 1);
+ iunle (ninf, ninf, 1);
+ iunle (1, 4, 1);
+ iunle (3, 3, 1);
+ iunle (5, 2, 0);
+
+ ile (1, 4, 1);
+ ile (3, 3, 1);
+ ile (5, 2, 0);
+
+ iungt (NaN, ninf, 1);
+ iungt (pinf, NaN, 1);
+ iungt (pinf, ninf, 1);
+ iungt (pinf, pinf, 0);
+ iungt (ninf, ninf, 0);
+ iungt (1, 4, 0);
+ iungt (3, 3, 0);
+ iungt (5, 2, 1);
+
+ igt (1, 4, 0);
+ igt (3, 3, 0);
+ igt (5, 2, 1);
+
+ iunge (NaN, ninf, 1);
+ iunge (pinf, NaN, 1);
+ iunge (ninf, pinf, 0);
+ iunge (pinf, pinf, 1);
+ iunge (ninf, ninf, 1);
+ iunge (1, 4, 0);
+ iunge (3, 3, 1);
+ iunge (5, 2, 1);
+
+ ige (1, 4, 0);
+ ige (3, 3, 1);
+ ige (5, 2, 1);
+
+ if (failed) {
+ post_log ("Error in FPU math6 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/fpu/fpu.c b/post/lib_ppc/fpu/fpu.c
new file mode 100644
index 0000000..07dcba8
--- /dev/null
+++ b/post/lib_ppc/fpu/fpu.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Sergei Poselenov <sposelenov@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * FPU test
+ *
+ * This test checks the arithmetic logic unit (ALU) of CPU.
+ * It tests independently various groups of instructions using
+ * run-time modification of the code to reduce the memory footprint.
+ * For more details refer to post/cpu/ *.c files.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_FPU
+
+#include <watchdog.h>
+
+extern int fpu_status (void);
+extern void fpu_enable (void);
+extern void fpu_disable (void);
+
+extern int fpu_post_test_math1 (void);
+extern int fpu_post_test_math2 (void);
+extern int fpu_post_test_math3 (void);
+extern int fpu_post_test_math4 (void);
+extern int fpu_post_test_math5 (void);
+extern int fpu_post_test_math6 (void);
+extern int fpu_post_test_math7 (void);
+
+int fpu_post_test (int flags)
+{
+ int fpu = fpu_status ();
+
+ int ret = 0;
+
+ WATCHDOG_RESET ();
+
+ if (!fpu)
+ fpu_enable ();
+
+ if (ret == 0)
+ ret = fpu_post_test_math1 ();
+ if (ret == 0)
+ ret = fpu_post_test_math2 ();
+ if (ret == 0)
+ ret = fpu_post_test_math3 ();
+ if (ret == 0)
+ ret = fpu_post_test_math4 ();
+ if (ret == 0)
+ ret = fpu_post_test_math5 ();
+ if (ret == 0)
+ ret = fpu_post_test_math6 ();
+ if (ret == 0)
+ ret = fpu_post_test_math7 ();
+
+ if (!fpu)
+ fpu_disable ();
+
+ WATCHDOG_RESET ();
+
+ return ret;
+}
+
+#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST */
diff --git a/post/lib_ppc/fpu/mul-subnormal-single-1.c b/post/lib_ppc/fpu/mul-subnormal-single-1.c
new file mode 100644
index 0000000..67f48da
--- /dev/null
+++ b/post/lib_ppc/fpu/mul-subnormal-single-1.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ * Check that certain subnormal numbers (formerly known as denormalized
+ * numbers) are rounded to within 0.5 ulp. PR other/14354.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_FPU
+
+union uf
+{
+ unsigned int u;
+ float f;
+};
+
+static float
+u2f (unsigned int v)
+{
+ union uf u;
+ u.u = v;
+ return u.f;
+}
+
+static unsigned int
+f2u (float v)
+{
+ union uf u;
+ u.f = v;
+ return u.u;
+}
+
+static int ok = 1;
+
+static void
+tstmul (unsigned int ux, unsigned int uy, unsigned int ur)
+{
+ float x = u2f (ux);
+ float y = u2f (uy);
+
+ if (f2u (x * y) != ur)
+ /* Set a variable rather than aborting here, to simplify tracing when
+ several computations are wrong. */
+ ok = 0;
+}
+
+/* We don't want to make this const and static, or else we risk inlining
+ causing the test to fold as constants at compile-time. */
+struct
+{
+ unsigned int p1, p2, res;
+} static volatile expected[] =
+{
+ {0xfff, 0x3f800400, 0xfff},
+ {0xf, 0x3fc88888, 0x17},
+ {0xf, 0x3f844444, 0xf}
+};
+
+int fpu_post_test_math7 (void)
+{
+ unsigned int i;
+
+ for (i = 0; i < sizeof (expected) / sizeof (expected[0]); i++)
+ {
+ tstmul (expected[i].p1, expected[i].p2, expected[i].res);
+ tstmul (expected[i].p2, expected[i].p1, expected[i].res);
+ }
+
+ if (!ok) {
+ post_log ("Error in FPU math7 test\n");
+ return -1;
+ }
+ return 0;
+}
+
+#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST */
diff --git a/post/post.c b/post/post.c
index ac41990..28435cc 100644
--- a/post/post.c
+++ b/post/post.c
@@ -428,7 +428,7 @@
unsigned long post_time_ms (unsigned long base)
{
#ifdef CONFIG_PPC
- return (unsigned long)get_ticks () / (get_tbclk () / CFG_HZ) - base;
+ return (unsigned long)(get_ticks () / (get_tbclk () / CFG_HZ)) - base;
#else
#warning "Not implemented yet"
return 0; /* Not implemented yet */
diff --git a/post/tests.c b/post/tests.c
index 3bccd1a..f3604b2 100644
--- a/post/tests.c
+++ b/post/tests.c
@@ -37,6 +37,7 @@
extern int rtc_post_test (int flags);
extern int memory_post_test (int flags);
extern int cpu_post_test (int flags);
+extern int fpu_post_test (int flags);
extern int uart_post_test (int flags);
extern int ether_post_test (int flags);
extern int spi_post_test (int flags);
@@ -126,6 +127,19 @@
CFG_POST_CPU
},
#endif
+#if CONFIG_POST & CFG_POST_FPU
+ {
+ "FPU test",
+ "fpu",
+ "This test verifies the arithmetic logic unit of"
+ " FPU.",
+ POST_RAM | POST_ALWAYS,
+ &fpu_post_test,
+ NULL,
+ NULL,
+ CFG_POST_FPU
+ },
+#endif
#if CONFIG_POST & CFG_POST_UART
{
"UART test",
diff --git a/tools/Makefile b/tools/Makefile
index 6177f90..e8e0280 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -21,10 +21,10 @@
# MA 02111-1307 USA
#
-BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
+BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) ubsha1$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
-OBJ_LINKS = environment.o crc32.o
-OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o
+OBJ_LINKS = environment.o crc32.o sha1.o
+OBJ_FILES = img2srec.o mkimage.o envcrc.o ubsha1.o gen_eth_addr.o bmp_logo.o
ifeq ($(ARCH),mips)
BIN_FILES += inca-swap-bytes$(SFX)
@@ -74,7 +74,7 @@
ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc)
HOST_CFLAGS = -traditional-cpp -Wall
HOST_LDFLAGS =-multiply_defined suppress
-HOST_ENVIRO_CFLAGS = -traditional-cpp
+HOST_ENVIRO_CFLAGS =
else
ifeq ($(HOSTOS)-$(HOSTARCH),netbsd-ppc)
@@ -126,14 +126,17 @@
all: $(obj).depend $(BINS) $(LOGO_H) subdirs
-$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o
+$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o $(obj)sha1.o
+ $(CC) $(CFLAGS) -o $@ $^
+
+$(obj)ubsha1$(SFX): $(obj)ubsha1.o $(obj)sha1.o
$(CC) $(CFLAGS) -o $@ $^
$(obj)img2srec$(SFX): $(obj)img2srec.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o
+$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o $(obj)sha1.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
@@ -160,9 +163,15 @@
$(obj)envcrc.o: $(src)envcrc.c
$(CC) -g $(CFLAGS) -c -o $@ $<
+$(obj)ubsha1.o: $(src)ubsha1.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
+
$(obj)crc32.o: $(obj)crc32.c
$(CC) -g $(CFLAGS) -c -o $@ $<
+$(obj)sha1.o: $(obj)sha1.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
+
$(obj)mkimage.o: $(src)mkimage.c
$(CC) -g $(CFLAGS) -c -o $@ $<
@@ -203,6 +212,10 @@
@rm -f $(obj)crc32.c
ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c
+$(obj)sha1.c:
+ @rm -f $(obj)sha1.c
+ ln -s $(src)../lib_generic/sha1.c $(obj)sha1.c
+
$(LOGO_H): $(obj)bmp_logo $(LOGO_BMP)
$(obj)./bmp_logo $(LOGO_BMP) >$@
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 416e658..2125130 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -446,7 +446,7 @@
}
/* We're a bit of paranoid */
-#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__)
+#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) && !defined(__APPLE__)
(void) fdatasync (ifd);
#else
(void) fsync (ifd);
@@ -496,7 +496,7 @@
(void) munmap((void *)ptr, sbuf.st_size);
/* We're a bit of paranoid */
-#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__)
+#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) && !defined(__APPLE__)
(void) fdatasync (ifd);
#else
(void) fsync (ifd);
diff --git a/tools/ubsha1.c b/tools/ubsha1.c
new file mode 100644
index 0000000..b37b2b7
--- /dev/null
+++ b/tools/ubsha1.c
@@ -0,0 +1,118 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include "sha1.h"
+
+#ifndef __ASSEMBLY__
+#define __ASSEMBLY__ /* Dirty trick to get only #defines */
+#endif
+#include <config.h>
+#undef __ASSEMBLY__
+
+#ifndef O_BINARY /* should be define'd on __WIN32__ */
+#define O_BINARY 0
+#endif
+
+#ifndef MAP_FAILED
+#define MAP_FAILED (-1)
+#endif
+
+extern int errno;
+
+extern void sha1_csum (unsigned char *input, int ilen, unsigned char output[20]);
+
+int main (int argc, char **argv)
+{
+ unsigned char output[20];
+ int i, len;
+
+ char *imagefile;
+ char *cmdname = *argv;
+ unsigned char *ptr;
+ unsigned char *data;
+ struct stat sbuf;
+ unsigned char *ptroff;
+ int ifd;
+ int off;
+
+ if (argc > 1) {
+ imagefile = argv[1];
+ ifd = open (imagefile, O_RDWR|O_BINARY);
+ if (ifd < 0) {
+ fprintf (stderr, "%s: Can't open %s: %s\n",
+ cmdname, imagefile, strerror(errno));
+ exit (EXIT_FAILURE);
+ }
+ if (fstat (ifd, &sbuf) < 0) {
+ fprintf (stderr, "%s: Can't stat %s: %s\n",
+ cmdname, imagefile, strerror(errno));
+ exit (EXIT_FAILURE);
+ }
+ len = sbuf.st_size;
+ ptr = (unsigned char *)mmap(0, len,
+ PROT_READ, MAP_SHARED, ifd, 0);
+ if (ptr == (unsigned char *)MAP_FAILED) {
+ fprintf (stderr, "%s: Can't read %s: %s\n",
+ cmdname, imagefile, strerror(errno));
+ exit (EXIT_FAILURE);
+ }
+
+ /* create a copy, so we can blank out the sha1 sum */
+ data = malloc (len);
+ memcpy (data, ptr, len);
+ off = SHA1_SUM_POS;
+ ptroff = &data[len + off];
+ for (i = 0; i < SHA1_SUM_LEN; i++) {
+ ptroff[i] = 0;
+ }
+
+ sha1_csum ((unsigned char *) data, len, (unsigned char *)output);
+
+ printf ("U-Boot sum:\n");
+ for (i = 0; i < 20 ; i++) {
+ printf ("%02X ", output[i]);
+ }
+ printf ("\n");
+ /* overwrite the sum in the bin file, with the actual */
+ lseek (ifd, SHA1_SUM_POS, SEEK_END);
+ if (write (ifd, output, SHA1_SUM_LEN) != SHA1_SUM_LEN) {
+ fprintf (stderr, "%s: Can't write %s: %s\n",
+ cmdname, imagefile, strerror(errno));
+ exit (EXIT_FAILURE);
+ }
+
+ free (data);
+ (void) munmap((void *)ptr, len);
+ (void) close (ifd);
+ }
+
+ return EXIT_SUCCESS;
+}