powerpc: remove 4xx support
There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/arch/powerpc/include/asm/4xx_pci.h b/arch/powerpc/include/asm/4xx_pci.h
deleted file mode 100644
index 276a780..0000000
--- a/arch/powerpc/include/asm/4xx_pci.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _405GP_PCI_H
-#define _405GP_PCI_H
-
-#include <pci.h>
-
-/*----------------------------------------------------------------------------+
-| 405GP PCI core memory map defines.
-+----------------------------------------------------------------------------*/
-#define MIN_PCI_MEMADDR1 0x80000000
-#define MIN_PCI_MEMADDR2 0x00000000
-#define MIN_PLB_PCI_IOADDR 0xE8000000 /* PLB side of PCI I/O address space */
-#define MIN_PCI_PCI_IOADDR 0x00000000 /* PCI side of PCI I/O address space */
-#define MAX_PCI_DEVICES 32
-
-/*----------------------------------------------------------------------------+
-| Defines for the 405GP PCI Config address and data registers followed by
-| defines for the standard PCI device configuration header.
-+----------------------------------------------------------------------------*/
-#define PCICFGADR 0xEEC00000
-#define PCICFGDATA 0xEEC00004
-
-#define PCIBUSNUM 0x40 /* 405GP specific parameters */
-#define PCISUBBUSNUM 0x41
-#define PCIDISCOUNT 0x42
-#define PCIBRDGOPT1 0x4A
-#define PCIBRDGOPT2 0x60
-
-/*----------------------------------------------------------------------------+
-| Defines for 405GP PCI Master local configuration regs.
-+----------------------------------------------------------------------------*/
-#define PMM0LA 0xEF400000
-#define PMM0MA 0xEF400004
-#define PMM0PCILA 0xEF400008
-#define PMM0PCIHA 0xEF40000C
-#define PMM1LA 0xEF400010
-#define PMM1MA 0xEF400014
-#define PMM1PCILA 0xEF400018
-#define PMM1PCIHA 0xEF40001C
-#define PMM2LA 0xEF400020
-#define PMM2MA 0xEF400024
-#define PMM2PCILA 0xEF400028
-#define PMM2PCIHA 0xEF40002C
-
-/*----------------------------------------------------------------------------+
-| Defines for 405GP PCI Target local configuration regs.
-+----------------------------------------------------------------------------*/
-#define PTM1MS 0xEF400030
-#define PTM1LA 0xEF400034
-#define PTM2MS 0xEF400038
-#define PTM2LA 0xEF40003C
-
-#define PCIDEVID_405GP 0x0
-
-void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev);
-int pci_arbiter_enabled(void);
-int __pci_pre_init(struct pci_controller *hose);
-void __pci_target_init(struct pci_controller *hose);
-void __pci_master_init(struct pci_controller *hose);
-void pci_target_init(struct pci_controller *);
-void pcie_setup_hoses(int busno);
-
-#endif
diff --git a/arch/powerpc/include/asm/4xx_pcie.h b/arch/powerpc/include/asm/4xx_pcie.h
deleted file mode 100644
index 26b532a..0000000
--- a/arch/powerpc/include/asm/4xx_pcie.h
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __4XX_PCIE_H
-#define __4XX_PCIE_H
-
-#include <asm/ppc4xx.h>
-#include <pci.h>
-
-#define DCRN_SDR0_CFGADDR 0x00e
-#define DCRN_SDR0_CFGDATA 0x00f
-
-#if defined(CONFIG_440SPE)
-#define CONFIG_SYS_PCIE_NR_PORTS 3
-
-#define CONFIG_SYS_PCIE_ADDR_HIGH 0x0000000d
-
-#define DCRN_PCIE0_BASE 0x100
-#define DCRN_PCIE1_BASE 0x120
-#define DCRN_PCIE2_BASE 0x140
-
-#define PCIE0_SDR 0x300
-#define PCIE1_SDR 0x340
-#define PCIE2_SDR 0x370
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define CONFIG_SYS_PCIE_NR_PORTS 2
-
-#define CONFIG_SYS_PCIE_ADDR_HIGH 0x0000000d
-
-#define DCRN_PCIE0_BASE 0x100
-#define DCRN_PCIE1_BASE 0x120
-
-#define PCIE0_SDR 0x300
-#define PCIE1_SDR 0x340
-#endif
-
-#if defined(CONFIG_405EX)
-#define CONFIG_SYS_PCIE_NR_PORTS 2
-
-#define CONFIG_SYS_PCIE_ADDR_HIGH 0x00000000
-
-#define DCRN_PCIE0_BASE 0x040
-#define DCRN_PCIE1_BASE 0x060
-
-#define PCIE0_SDR 0x400
-#define PCIE1_SDR 0x440
-#endif
-
-#define PCIE0 DCRN_PCIE0_BASE
-#define PCIE1 DCRN_PCIE1_BASE
-#define PCIE2 DCRN_PCIE2_BASE
-
-#define DCRN_PEGPL_CFGBAH(base) (base + 0x00)
-#define DCRN_PEGPL_CFGBAL(base) (base + 0x01)
-#define DCRN_PEGPL_CFGMSK(base) (base + 0x02)
-#define DCRN_PEGPL_MSGBAH(base) (base + 0x03)
-#define DCRN_PEGPL_MSGBAL(base) (base + 0x04)
-#define DCRN_PEGPL_MSGMSK(base) (base + 0x05)
-#define DCRN_PEGPL_OMR1BAH(base) (base + 0x06)
-#define DCRN_PEGPL_OMR1BAL(base) (base + 0x07)
-#define DCRN_PEGPL_OMR1MSKH(base) (base + 0x08)
-#define DCRN_PEGPL_OMR1MSKL(base) (base + 0x09)
-#define DCRN_PEGPL_REGBAH(base) (base + 0x12)
-#define DCRN_PEGPL_REGBAL(base) (base + 0x13)
-#define DCRN_PEGPL_REGMSK(base) (base + 0x14)
-#define DCRN_PEGPL_SPECIAL(base) (base + 0x15)
-#define DCRN_PEGPL_CFG(base) (base + 0x16)
-
-/*
- * System DCRs (SDRs)
- */
-#define PESDR0_PLLLCT1 0x03a0
-#define PESDR0_PLLLCT2 0x03a1
-#define PESDR0_PLLLCT3 0x03a2
-
-/* common regs, at for all 4xx with PCIe core */
-#define SDRN_PESDR_UTLSET1(n) (sdr_base(n) + 0x00)
-#define SDRN_PESDR_UTLSET2(n) (sdr_base(n) + 0x01)
-#define SDRN_PESDR_DLPSET(n) (sdr_base(n) + 0x02)
-#define SDRN_PESDR_LOOP(n) (sdr_base(n) + 0x03)
-#define SDRN_PESDR_RCSSET(n) (sdr_base(n) + 0x04)
-#define SDRN_PESDR_RCSSTS(n) (sdr_base(n) + 0x05)
-
-#if defined(CONFIG_440SPE)
-#define SDRN_PESDR_HSSL0SET1(n) (sdr_base(n) + 0x06)
-#define SDRN_PESDR_HSSL0SET2(n) (sdr_base(n) + 0x07)
-#define SDRN_PESDR_HSSL0STS(n) (sdr_base(n) + 0x08)
-#define SDRN_PESDR_HSSL1SET1(n) (sdr_base(n) + 0x09)
-#define SDRN_PESDR_HSSL1SET2(n) (sdr_base(n) + 0x0a)
-#define SDRN_PESDR_HSSL1STS(n) (sdr_base(n) + 0x0b)
-#define SDRN_PESDR_HSSL2SET1(n) (sdr_base(n) + 0x0c)
-#define SDRN_PESDR_HSSL2SET2(n) (sdr_base(n) + 0x0d)
-#define SDRN_PESDR_HSSL2STS(n) (sdr_base(n) + 0x0e)
-#define SDRN_PESDR_HSSL3SET1(n) (sdr_base(n) + 0x0f)
-#define SDRN_PESDR_HSSL3SET2(n) (sdr_base(n) + 0x10)
-#define SDRN_PESDR_HSSL3STS(n) (sdr_base(n) + 0x11)
-
-#define PESDR0_UTLSET1 0x0300
-#define PESDR0_UTLSET2 0x0301
-#define PESDR0_DLPSET 0x0302
-#define PESDR0_LOOP 0x0303
-#define PESDR0_RCSSET 0x0304
-#define PESDR0_RCSSTS 0x0305
-#define PESDR0_HSSL0SET1 0x0306
-#define PESDR0_HSSL0SET2 0x0307
-#define PESDR0_HSSL0STS 0x0308
-#define PESDR0_HSSL1SET1 0x0309
-#define PESDR0_HSSL1SET2 0x030a
-#define PESDR0_HSSL1STS 0x030b
-#define PESDR0_HSSL2SET1 0x030c
-#define PESDR0_HSSL2SET2 0x030d
-#define PESDR0_HSSL2STS 0x030e
-#define PESDR0_HSSL3SET1 0x030f
-#define PESDR0_HSSL3SET2 0x0310
-#define PESDR0_HSSL3STS 0x0311
-#define PESDR0_HSSL4SET1 0x0312
-#define PESDR0_HSSL4SET2 0x0313
-#define PESDR0_HSSL4STS 0x0314
-#define PESDR0_HSSL5SET1 0x0315
-#define PESDR0_HSSL5SET2 0x0316
-#define PESDR0_HSSL5STS 0x0317
-#define PESDR0_HSSL6SET1 0x0318
-#define PESDR0_HSSL6SET2 0x0319
-#define PESDR0_HSSL6STS 0x031a
-#define PESDR0_HSSL7SET1 0x031b
-#define PESDR0_HSSL7SET2 0x031c
-#define PESDR0_HSSL7STS 0x031d
-#define PESDR0_HSSCTLSET 0x031e
-#define PESDR0_LANE_ABCD 0x031f
-#define PESDR0_LANE_EFGH 0x0320
-
-#define PESDR1_UTLSET1 0x0340
-#define PESDR1_UTLSET2 0x0341
-#define PESDR1_DLPSET 0x0342
-#define PESDR1_LOOP 0x0343
-#define PESDR1_RCSSET 0x0344
-#define PESDR1_RCSSTS 0x0345
-#define PESDR1_HSSL0SET1 0x0346
-#define PESDR1_HSSL0SET2 0x0347
-#define PESDR1_HSSL0STS 0x0348
-#define PESDR1_HSSL1SET1 0x0349
-#define PESDR1_HSSL1SET2 0x034a
-#define PESDR1_HSSL1STS 0x034b
-#define PESDR1_HSSL2SET1 0x034c
-#define PESDR1_HSSL2SET2 0x034d
-#define PESDR1_HSSL2STS 0x034e
-#define PESDR1_HSSL3SET1 0x034f
-#define PESDR1_HSSL3SET2 0x0350
-#define PESDR1_HSSL3STS 0x0351
-#define PESDR1_HSSCTLSET 0x0352
-#define PESDR1_LANE_ABCD 0x0353
-
-#define PESDR2_UTLSET1 0x0370
-#define PESDR2_UTLSET2 0x0371
-#define PESDR2_DLPSET 0x0372
-#define PESDR2_LOOP 0x0373
-#define PESDR2_RCSSET 0x0374
-#define PESDR2_RCSSTS 0x0375
-#define PESDR2_HSSL0SET1 0x0376
-#define PESDR2_HSSL0SET2 0x0377
-#define PESDR2_HSSL0STS 0x0378
-#define PESDR2_HSSL1SET1 0x0379
-#define PESDR2_HSSL1SET2 0x037a
-#define PESDR2_HSSL1STS 0x037b
-#define PESDR2_HSSL2SET1 0x037c
-#define PESDR2_HSSL2SET2 0x037d
-#define PESDR2_HSSL2STS 0x037e
-#define PESDR2_HSSL3SET1 0x037f
-#define PESDR2_HSSL3SET2 0x0380
-#define PESDR2_HSSL3STS 0x0381
-#define PESDR2_HSSCTLSET 0x0382
-#define PESDR2_LANE_ABCD 0x0383
-
-#elif defined(CONFIG_405EX)
-
-#define SDRN_PESDR_PHYSET1(n) (sdr_base(n) + 0x06)
-#define SDRN_PESDR_PHYSET2(n) (sdr_base(n) + 0x07)
-#define SDRN_PESDR_BIST(n) (sdr_base(n) + 0x08)
-#define SDRN_PESDR_LPB(n) (sdr_base(n) + 0x0b)
-#define SDRN_PESDR_PHYSTA(n) (sdr_base(n) + 0x0c)
-
-#define PESDR0_UTLSET1 0x0400
-#define PESDR0_UTLSET2 0x0401
-#define PESDR0_DLPSET 0x0402
-#define PESDR0_LOOP 0x0403
-#define PESDR0_RCSSET 0x0404
-#define PESDR0_RCSSTS 0x0405
-#define PESDR0_PHYSET1 0x0406
-#define PESDR0_PHYSET2 0x0407
-#define PESDR0_BIST 0x0408
-#define PESDR0_LPB 0x040B
-#define PESDR0_PHYSTA 0x040C
-
-#define PESDR1_UTLSET1 0x0440
-#define PESDR1_UTLSET2 0x0441
-#define PESDR1_DLPSET 0x0442
-#define PESDR1_LOOP 0x0443
-#define PESDR1_RCSSET 0x0444
-#define PESDR1_RCSSTS 0x0445
-#define PESDR1_PHYSET1 0x0446
-#define PESDR1_PHYSET2 0x0447
-#define PESDR1_BIST 0x0448
-#define PESDR1_LPB 0x044B
-#define PESDR1_PHYSTA 0x044C
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define PESDR0_L0BIST 0x0308 /* PE0 L0 built in self test */
-#define PESDR0_L0BISTSTS 0x0309 /* PE0 L0 built in self test status */
-#define PESDR0_L0CDRCTL 0x030A /* PE0 L0 CDR control */
-#define PESDR0_L0DRV 0x030B /* PE0 L0 drive */
-#define PESDR0_L0REC 0x030C /* PE0 L0 receiver */
-#define PESDR0_L0LPB 0x030D /* PE0 L0 loopback */
-#define PESDR0_L0CLK 0x030E /* PE0 L0 clocking */
-#define PESDR0_PHY_CTL_RST 0x030F /* PE0 PHY control reset */
-#define PESDR0_RSTSTA 0x0310 /* PE0 reset status */
-#define PESDR0_OBS 0x0311 /* PE0 observation register */
-#define PESDR0_L0ERRC 0x0320 /* PE0 L0 error counter */
-
-#define PESDR1_L0BIST 0x0348 /* PE1 L0 built in self test */
-#define PESDR1_L1BIST 0x0349 /* PE1 L1 built in self test */
-#define PESDR1_L2BIST 0x034A /* PE1 L2 built in self test */
-#define PESDR1_L3BIST 0x034B /* PE1 L3 built in self test */
-#define PESDR1_L0BISTSTS 0x034C /* PE1 L0 built in self test status */
-#define PESDR1_L1BISTSTS 0x034D /* PE1 L1 built in self test status */
-#define PESDR1_L2BISTSTS 0x034E /* PE1 L2 built in self test status */
-#define PESDR1_L3BISTSTS 0x034F /* PE1 L3 built in self test status */
-#define PESDR1_L0CDRCTL 0x0350 /* PE1 L0 CDR control */
-#define PESDR1_L1CDRCTL 0x0351 /* PE1 L1 CDR control */
-#define PESDR1_L2CDRCTL 0x0352 /* PE1 L2 CDR control */
-#define PESDR1_L3CDRCTL 0x0353 /* PE1 L3 CDR control */
-#define PESDR1_L0DRV 0x0354 /* PE1 L0 drive */
-#define PESDR1_L1DRV 0x0355 /* PE1 L1 drive */
-#define PESDR1_L2DRV 0x0356 /* PE1 L2 drive */
-#define PESDR1_L3DRV 0x0357 /* PE1 L3 drive */
-#define PESDR1_L0REC 0x0358 /* PE1 L0 receiver */
-#define PESDR1_L1REC 0x0359 /* PE1 L1 receiver */
-#define PESDR1_L2REC 0x035A /* PE1 L2 receiver */
-#define PESDR1_L3REC 0x035B /* PE1 L3 receiver */
-#define PESDR1_L0LPB 0x035C /* PE1 L0 loopback */
-#define PESDR1_L1LPB 0x035D /* PE1 L1 loopback */
-#define PESDR1_L2LPB 0x035E /* PE1 L2 loopback */
-#define PESDR1_L3LPB 0x035F /* PE1 L3 loopback */
-#define PESDR1_L0CLK 0x0360 /* PE1 L0 clocking */
-#define PESDR1_L1CLK 0x0361 /* PE1 L1 clocking */
-#define PESDR1_L2CLK 0x0362 /* PE1 L2 clocking */
-#define PESDR1_L3CLK 0x0363 /* PE1 L3 clocking */
-#define PESDR1_PHY_CTL_RST 0x0364 /* PE1 PHY control reset */
-#define PESDR1_RSTSTA 0x0365 /* PE1 reset status */
-#define PESDR1_OBS 0x0366 /* PE1 observation register */
-#define PESDR1_L0ERRC 0x0368 /* PE1 L0 error counter */
-#define PESDR1_L1ERRC 0x0369 /* PE1 L1 error counter */
-#define PESDR1_L2ERRC 0x036A /* PE1 L2 error counter */
-#define PESDR1_L3ERRC 0x036B /* PE1 L3 error counter */
-#define PESDR0_IHS1 0x036C /* PE interrupt handler interfact setting 1 */
-#define PESDR0_IHS2 0x036D /* PE interrupt handler interfact setting 2 */
-
-#endif
-
-/* SDR Bit Mappings */
-#define PESDRx_RCSSET_HLDPLB 0x10000000
-#define PESDRx_RCSSET_RSTGU 0x01000000
-#define PESDRx_RCSSET_RDY 0x00100000
-#define PESDRx_RCSSET_RSTDL 0x00010000
-#define PESDRx_RCSSET_RSTPYN 0x00001000
-
-#define PESDRx_RCSSTS_PLBIDL 0x10000000
-#define PESDRx_RCSSTS_HRSTRQ 0x01000000
-#define PESDRx_RCSSTS_PGRST 0x00100000
-#define PESDRx_RCSSTS_VC0ACT 0x00010000
-#define PESDRx_RCSSTS_BMEN 0x00000100
-
-/*
- * UTL register offsets
- */
-#define PEUTL_PBCTL 0x00
-#define PEUTL_PBBSZ 0x20
-#define PEUTL_OPDBSZ 0x68
-#define PEUTL_IPHBSZ 0x70
-#define PEUTL_IPDBSZ 0x78
-#define PEUTL_OUTTR 0x90
-#define PEUTL_INTR 0x98
-#define PEUTL_PCTL 0xa0
-#define PEUTL_RCSTA 0xb0
-#define PEUTL_RCIRQEN 0xb8
-
-/*
- * Config space register offsets
- */
-#define PECFG_BAR0LMPA 0x210
-#define PECFG_BAR0HMPA 0x214
-#define PECFG_BAR1MPA 0x218
-#define PECFG_BAR2LMPA 0x220
-#define PECFG_BAR2HMPA 0x224
-
-#define PECFG_PIMEN 0x33c
-#define PECFG_PIM0LAL 0x340
-#define PECFG_PIM0LAH 0x344
-#define PECFG_PIM1LAL 0x348
-#define PECFG_PIM1LAH 0x34c
-#define PECFG_PIM01SAL 0x350
-#define PECFG_PIM01SAH 0x354
-
-#define PECFG_POM0LAL 0x380
-#define PECFG_POM0LAH 0x384
-
-#define SDR_READ(offset) ({\
- mtdcr(DCRN_SDR0_CFGADDR, offset); \
- mfdcr(DCRN_SDR0_CFGDATA);})
-
-#define SDR_WRITE(offset, data) ({\
- mtdcr(DCRN_SDR0_CFGADDR, offset); \
- mtdcr(DCRN_SDR0_CFGDATA,data);})
-
-#define GPL_DMER_MASK_DISA 0x02000000
-
-#define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL))
-#define U64_TO_U32_HIGH(val) ((u32)((val) >> 32))
-
-/*
- * Prototypes
- */
-int ppc4xx_init_pcie(void);
-int ppc4xx_init_pcie_rootport(int port);
-int ppc4xx_init_pcie_endport(int port);
-void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port);
-int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port);
-int pcie_hose_scan(struct pci_controller *hose, int bus);
-
-/*
- * Function to determine root port or endport from env variable.
- */
-static inline int is_end_point(int port)
-{
- char s[10], *tk;
- char *pcie_mode = getenv("pcie_mode");
-
- if (pcie_mode == NULL)
- return 0;
-
- strcpy(s, pcie_mode);
- tk = strtok(s, ":");
-
- switch (port) {
- case 0:
- if (tk != NULL) {
- if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
- return 1;
- else
- return 0;
- }
- else
- return 0;
-
- case 1:
- tk = strtok(NULL, ":");
- if (tk != NULL) {
- if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
- return 1;
- else
- return 0;
- }
- else
- return 0;
-
- case 2:
- tk = strtok(NULL, ":");
- if (tk != NULL)
- tk = strtok(NULL, ":");
- if (tk != NULL) {
- if (!(strcmp(tk, "ep") && strcmp(tk, "EP")))
- return 1;
- else
- return 0;
- }
- else
- return 0;
- }
-
- return 0;
-}
-
-#if defined(PCIE0_SDR)
-static inline u32 sdr_base(int port)
-{
- switch (port) {
- default: /* to satisfy compiler */
- case 0:
- return PCIE0_SDR;
- case 1:
- return PCIE1_SDR;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- return PCIE2_SDR;
-#endif
- }
-}
-#endif /* defined(PCIE0_SDR) */
-
-#endif /* __4XX_PCIE_H */
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 55686a1..eaa23d2 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -35,8 +35,7 @@
#define CONFIG_SYS_BOOT_GET_KBD
#ifndef CONFIG_MAX_MEM_MAPPED
-#if defined(CONFIG_4xx) || \
- defined(CONFIG_E500) || \
+#if defined(CONFIG_E500) || \
defined(CONFIG_MPC86xx) || \
defined(CONFIG_E300)
#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index d0c3fa0..1c4a82c 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -90,9 +90,6 @@
unsigned int dp_alloc_base;
unsigned int dp_alloc_top;
#endif
-#if defined(CONFIG_4xx)
- u32 uart_clk;
-#endif /* CONFIG_4xx */
#ifdef CONFIG_SYS_FPGA_COUNT
unsigned fpga_state[CONFIG_SYS_FPGA_COUNT];
#endif
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 9f370dd..c039fc5 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -9,17 +9,6 @@
#ifndef INTERRUPT_H
#define INTERRUPT_H
-#if defined(CONFIG_XILINX_440)
-#include <asm/xilinx_irq.h>
-#else
-#include <asm/ppc4xx-uic.h>
-#endif
-
-void pic_enable(void);
-void pic_irq_enable(unsigned int irq);
-void pic_irq_disable(unsigned int irq);
-void pic_irq_ack(unsigned int irq);
void external_interrupt(struct pt_regs *regs);
-void interrupt_run_handler(int vec);
#endif
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 5aa916f..82e5f9f 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -585,213 +585,4 @@
#define LAWAR_SIZE_32G (LAWAR_SIZE_BASE+24)
#endif
-#ifdef CONFIG_440
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-/* Some additional macros for combinations often used */
-#define SA_IG (SA_I | SA_G)
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-/* Some additional macros for combinations often used */
-#define AC_RW (AC_R | AC_W)
-#define AC_RWX (AC_R | AC_W | AC_X)
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
-#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn))
-#define TLB2(a) ((a) & 0x00000fbf)
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ;\
-0: mflr r0 ;\
- mtlr r1 ;\
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-/*----------------------------------------------------------------------------+
-| TLB specific defines.
-+----------------------------------------------------------------------------*/
-#define TLB_256MB_ALIGN_MASK 0xFF0000000ULL
-#define TLB_16MB_ALIGN_MASK 0xFFF000000ULL
-#define TLB_1MB_ALIGN_MASK 0xFFFF00000ULL
-#define TLB_256KB_ALIGN_MASK 0xFFFFC0000ULL
-#define TLB_64KB_ALIGN_MASK 0xFFFFF0000ULL
-#define TLB_16KB_ALIGN_MASK 0xFFFFFC000ULL
-#define TLB_4KB_ALIGN_MASK 0xFFFFFF000ULL
-#define TLB_1KB_ALIGN_MASK 0xFFFFFFC00ULL
-#define TLB_256MB_SIZE 0x10000000
-#define TLB_16MB_SIZE 0x01000000
-#define TLB_1MB_SIZE 0x00100000
-#define TLB_256KB_SIZE 0x00040000
-#define TLB_64KB_SIZE 0x00010000
-#define TLB_16KB_SIZE 0x00004000
-#define TLB_4KB_SIZE 0x00001000
-#define TLB_1KB_SIZE 0x00000400
-
-#define TLB_WORD0_EPN_MASK 0xFFFFFC00
-#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD0_V_MASK 0x00000200
-#define TLB_WORD0_V_ENABLE 0x00000200
-#define TLB_WORD0_V_DISABLE 0x00000000
-#define TLB_WORD0_TS_MASK 0x00000100
-#define TLB_WORD0_TS_1 0x00000100
-#define TLB_WORD0_TS_0 0x00000000
-#define TLB_WORD0_SIZE_MASK 0x000000F0
-#define TLB_WORD0_SIZE_1KB 0x00000000
-#define TLB_WORD0_SIZE_4KB 0x00000010
-#define TLB_WORD0_SIZE_16KB 0x00000020
-#define TLB_WORD0_SIZE_64KB 0x00000030
-#define TLB_WORD0_SIZE_256KB 0x00000040
-#define TLB_WORD0_SIZE_1MB 0x00000050
-#define TLB_WORD0_SIZE_16MB 0x00000070
-#define TLB_WORD0_SIZE_256MB 0x00000090
-#define TLB_WORD0_TPAR_MASK 0x0000000F
-#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
-#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
-
-#define TLB_WORD1_RPN_MASK 0xFFFFFC00
-#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
-#define TLB_WORD1_PAR1_MASK 0x00000300
-#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
-#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
-#define TLB_WORD1_PAR1_0 0x00000000
-#define TLB_WORD1_PAR1_1 0x00000100
-#define TLB_WORD1_PAR1_2 0x00000200
-#define TLB_WORD1_PAR1_3 0x00000300
-#define TLB_WORD1_ERPN_MASK 0x0000000F
-#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
-#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
-
-#define TLB_WORD2_PAR2_MASK 0xC0000000
-#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
-#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
-#define TLB_WORD2_PAR2_0 0x00000000
-#define TLB_WORD2_PAR2_1 0x40000000
-#define TLB_WORD2_PAR2_2 0x80000000
-#define TLB_WORD2_PAR2_3 0xC0000000
-#define TLB_WORD2_U0_MASK 0x00008000
-#define TLB_WORD2_U0_ENABLE 0x00008000
-#define TLB_WORD2_U0_DISABLE 0x00000000
-#define TLB_WORD2_U1_MASK 0x00004000
-#define TLB_WORD2_U1_ENABLE 0x00004000
-#define TLB_WORD2_U1_DISABLE 0x00000000
-#define TLB_WORD2_U2_MASK 0x00002000
-#define TLB_WORD2_U2_ENABLE 0x00002000
-#define TLB_WORD2_U2_DISABLE 0x00000000
-#define TLB_WORD2_U3_MASK 0x00001000
-#define TLB_WORD2_U3_ENABLE 0x00001000
-#define TLB_WORD2_U3_DISABLE 0x00000000
-#define TLB_WORD2_W_MASK 0x00000800
-#define TLB_WORD2_W_ENABLE 0x00000800
-#define TLB_WORD2_W_DISABLE 0x00000000
-#define TLB_WORD2_I_MASK 0x00000400
-#define TLB_WORD2_I_ENABLE 0x00000400
-#define TLB_WORD2_I_DISABLE 0x00000000
-#define TLB_WORD2_M_MASK 0x00000200
-#define TLB_WORD2_M_ENABLE 0x00000200
-#define TLB_WORD2_M_DISABLE 0x00000000
-#define TLB_WORD2_G_MASK 0x00000100
-#define TLB_WORD2_G_ENABLE 0x00000100
-#define TLB_WORD2_G_DISABLE 0x00000000
-#define TLB_WORD2_E_MASK 0x00000080
-#define TLB_WORD2_E_ENABLE 0x00000080
-#define TLB_WORD2_E_DISABLE 0x00000000
-#define TLB_WORD2_UX_MASK 0x00000020
-#define TLB_WORD2_UX_ENABLE 0x00000020
-#define TLB_WORD2_UX_DISABLE 0x00000000
-#define TLB_WORD2_UW_MASK 0x00000010
-#define TLB_WORD2_UW_ENABLE 0x00000010
-#define TLB_WORD2_UW_DISABLE 0x00000000
-#define TLB_WORD2_UR_MASK 0x00000008
-#define TLB_WORD2_UR_ENABLE 0x00000008
-#define TLB_WORD2_UR_DISABLE 0x00000000
-#define TLB_WORD2_SX_MASK 0x00000004
-#define TLB_WORD2_SX_ENABLE 0x00000004
-#define TLB_WORD2_SX_DISABLE 0x00000000
-#define TLB_WORD2_SW_MASK 0x00000002
-#define TLB_WORD2_SW_ENABLE 0x00000002
-#define TLB_WORD2_SW_DISABLE 0x00000000
-#define TLB_WORD2_SR_MASK 0x00000001
-#define TLB_WORD2_SR_ENABLE 0x00000001
-#define TLB_WORD2_SR_DISABLE 0x00000000
-
-/*----------------------------------------------------------------------------+
-| Following instructions are not available in Book E mode of the GNU assembler.
-+----------------------------------------------------------------------------*/
-#define DCCCI(ra,rb) .long 0x7c000000|\
- (ra<<16)|(rb<<11)|(454<<1)
-
-#define ICCCI(ra,rb) .long 0x7c000000|\
- (ra<<16)|(rb<<11)|(966<<1)
-
-#define DCREAD(rt,ra,rb) .long 0x7c000000|\
- (rt<<21)|(ra<<16)|(rb<<11)|(486<<1)
-
-#define ICREAD(ra,rb) .long 0x7c000000|\
- (ra<<16)|(rb<<11)|(998<<1)
-
-#define TLBSX(rt,ra,rb) .long 0x7c000000|\
- (rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
-
-#define TLBWE(rs,ra,ws) .long 0x7c000000|\
- (rs<<21)|(ra<<16)|(ws<<11)|(978<<1)
-
-#define TLBRE(rt,ra,ws) .long 0x7c000000|\
- (rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
-
-#define TLBSXDOT(rt,ra,rb) .long 0x7c000001|\
- (rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
-
-#define MSYNC .long 0x7c000000|\
- (598<<1)
-
-#define MBAR_INST .long 0x7c000000|\
- (854<<1)
-
-#ifndef __ASSEMBLY__
-/* Prototypes */
-void mttlb1(unsigned long index, unsigned long value);
-void mttlb2(unsigned long index, unsigned long value);
-void mttlb3(unsigned long index, unsigned long value);
-unsigned long mftlb1(unsigned long index);
-unsigned long mftlb2(unsigned long index);
-unsigned long mftlb3(unsigned long index);
-
-void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
-void remove_tlb(u32 vaddr, u32 size);
-void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value);
-#endif /* __ASSEMBLY__ */
-
-#endif /* CONFIG_440 */
#endif /* _PPC_MMU_H_ */
diff --git a/arch/powerpc/include/asm/ppc.h b/arch/powerpc/include/asm/ppc.h
index 4d9af6c..aa6c304 100644
--- a/arch/powerpc/include/asm/ppc.h
+++ b/arch/powerpc/include/asm/ppc.h
@@ -25,9 +25,6 @@
#include <mpc83xx.h>
#include <asm/immap_83xx.h>
#endif
-#ifdef CONFIG_4xx
-#include <asm/ppc4xx.h>
-#endif
#ifdef CONFIG_SOC_DA8XX
#include <asm/arch/hardware.h>
#endif
@@ -47,8 +44,7 @@
void wr_dc_cst(uint);
void wr_dc_adr(uint);
-#if defined(CONFIG_4xx) || \
- defined(CONFIG_MPC85xx) || \
+#if defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || \
defined(CONFIG_MPC83xx)
unsigned char in8(unsigned int);
diff --git a/arch/powerpc/include/asm/ppc405.h b/arch/powerpc/include/asm/ppc405.h
deleted file mode 100644
index f2ed16a..0000000
--- a/arch/powerpc/include/asm/ppc405.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0 IBM-pibs
- */
-
-#ifndef __PPC405_H__
-#define __PPC405_H__
-
-/* Define bits and masks for real-mode storage attribute control registers */
-#define PPC_128MB_SACR_BIT(addr) ((addr) >> 27)
-#define PPC_128MB_SACR_VALUE(addr) PPC_REG_VAL(PPC_128MB_SACR_BIT(addr),1)
-
-#define CONFIG_SYS_DCACHE_SIZE (16 << 10) /* For AMCC 405 CPUs */
-
-/* DCR registers */
-#define PLB0_ACR 0x0087
-
-/* SDR registers */
-#define SDR0_PINSTP 0x0040
-
-/* CPR registers */
-#define CPR0_CLKUPD 0x0020
-#define CPR0_PLLC 0x0040
-#define CPR0_PLLD 0x0060
-#define CPR0_CPUD 0x0080
-#define CPR0_PLBD 0x00a0
-#define CPR0_OPBD0 0x00c0
-#define CPR0_PERD 0x00e0
-
-/*
- * DMA
- */
-#define DMA_DCR_BASE 0x0100
-#define DMACR0 (DMA_DCR_BASE + 0x00) /* DMA channel control reg 0 */
-#define DMACT0 (DMA_DCR_BASE + 0x01) /* DMA count reg 0 */
-#define DMADA0 (DMA_DCR_BASE + 0x02) /* DMA destination address reg 0 */
-#define DMASA0 (DMA_DCR_BASE + 0x03) /* DMA source address reg 0 */
-#define DMASB0 (DMA_DCR_BASE + 0x04) /* DMA sg descriptor addr 0 */
-#define DMACR1 (DMA_DCR_BASE + 0x08) /* DMA channel control reg 1 */
-#define DMACT1 (DMA_DCR_BASE + 0x09) /* DMA count reg 1 */
-#define DMADA1 (DMA_DCR_BASE + 0x0a) /* DMA destination address reg 1 */
-#define DMASA1 (DMA_DCR_BASE + 0x0b) /* DMA source address reg 1 */
-#define DMASB1 (DMA_DCR_BASE + 0x0c) /* DMA sg descriptor addr 1 */
-#define DMACR2 (DMA_DCR_BASE + 0x10) /* DMA channel control reg 2 */
-#define DMACT2 (DMA_DCR_BASE + 0x11) /* DMA count reg 2 */
-#define DMADA2 (DMA_DCR_BASE + 0x12) /* DMA destination address reg 2 */
-#define DMASA2 (DMA_DCR_BASE + 0x13) /* DMA source address reg 2 */
-#define DMASB2 (DMA_DCR_BASE + 0x14) /* DMA sg descriptor addr 2 */
-#define DMACR3 (DMA_DCR_BASE + 0x18) /* DMA channel control reg 3 */
-#define DMACT3 (DMA_DCR_BASE + 0x19) /* DMA count reg 3 */
-#define DMADA3 (DMA_DCR_BASE + 0x1a) /* DMA destination address reg 3 */
-#define DMASA3 (DMA_DCR_BASE + 0x1b) /* DMA source address reg 3 */
-#define DMASB3 (DMA_DCR_BASE + 0x1c) /* DMA sg descriptor addr 3 */
-#define DMASR (DMA_DCR_BASE + 0x20) /* DMA status reg */
-#define DMASGC (DMA_DCR_BASE + 0x23) /* DMA scatter/gather command reg*/
-#define DMAADR (DMA_DCR_BASE + 0x24) /* DMA address decode reg */
-
-#endif /* __PPC405_H__ */
diff --git a/arch/powerpc/include/asm/ppc405ep.h b/arch/powerpc/include/asm/ppc405ep.h
deleted file mode 100644
index 9f04215..0000000
--- a/arch/powerpc/include/asm/ppc405ep.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC405EP_H_
-#define _PPC405EP_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */
-
-/* Memory mapped register */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
-
-/* DCR */
-#define OCM0_ISCNTL 0x0019 /* OCM I-side control reg */
-#define OCM0_DSARC 0x001a /* OCM D-side address compare */
-#define OCM0_DSCNTL 0x001b /* OCM D-side control */
-#define CPC0_PLLMR0 0x00f0 /* PLL mode register 0 */
-#define CPC0_BOOT 0x00f1 /* Clock status register */
-#define CPC0_CR1 0x00f2 /* Chip Control 1 register */
-#define CPC0_EPCTL 0x00f3 /* EMAC to PHY control register */
-#define CPC0_PLLMR1 0x00f4 /* PLL mode register 1 */
-#define CPC0_UCR 0x00f5 /* UART control register */
-#define CPC0_SRR 0x00f6 /* Soft Reset register */
-#define CPC0_PCI 0x00f9 /* PCI control register */
-
-/* Defines for CPC0_EPCTL register */
-#define CPC0_EPCTL_E0NFE 0x80000000
-#define CPC0_EPCTL_E1NFE 0x40000000
-
-/* Defines for CPC0_PCI Register */
-#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */
-#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */
-#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled */
-
-/* Defines for CPC0_BOOR Register */
-#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */
-
-/* Bit definitions */
-#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */
-#define PLLMR0_CPU_DIV_BYPASS 0x00000000
-#define PLLMR0_CPU_DIV_2 0x00100000
-#define PLLMR0_CPU_DIV_3 0x00200000
-#define PLLMR0_CPU_DIV_4 0x00300000
-
-#define PLLMR0_CPU_TO_PLB_MASK 0x00030000 /* CPU:PLB Frequency Divisor */
-#define PLLMR0_CPU_PLB_DIV_1 0x00000000
-#define PLLMR0_CPU_PLB_DIV_2 0x00010000
-#define PLLMR0_CPU_PLB_DIV_3 0x00020000
-#define PLLMR0_CPU_PLB_DIV_4 0x00030000
-
-#define PLLMR0_OPB_TO_PLB_MASK 0x00003000 /* OPB:PLB Frequency Divisor */
-#define PLLMR0_OPB_PLB_DIV_1 0x00000000
-#define PLLMR0_OPB_PLB_DIV_2 0x00001000
-#define PLLMR0_OPB_PLB_DIV_3 0x00002000
-#define PLLMR0_OPB_PLB_DIV_4 0x00003000
-
-#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */
-#define PLLMR0_EXB_PLB_DIV_2 0x00000000
-#define PLLMR0_EXB_PLB_DIV_3 0x00000100
-#define PLLMR0_EXB_PLB_DIV_4 0x00000200
-#define PLLMR0_EXB_PLB_DIV_5 0x00000300
-
-#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */
-#define PLLMR0_MAL_PLB_DIV_1 0x00000000
-#define PLLMR0_MAL_PLB_DIV_2 0x00000010
-#define PLLMR0_MAL_PLB_DIV_3 0x00000020
-#define PLLMR0_MAL_PLB_DIV_4 0x00000030
-
-#define PLLMR0_PCI_TO_PLB_MASK 0x00000003 /* PCI:PLB Frequency Divisor */
-#define PLLMR0_PCI_PLB_DIV_1 0x00000000
-#define PLLMR0_PCI_PLB_DIV_2 0x00000001
-#define PLLMR0_PCI_PLB_DIV_3 0x00000002
-#define PLLMR0_PCI_PLB_DIV_4 0x00000003
-
-#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */
-#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */
-#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */
-
-#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */
-#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */
-#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */
-
-/* Defines for CPC0_PLLMR1 Register fields */
-#define PLL_ACTIVE 0x80000000
-#define CPC0_PLLMR1_SSCS 0x80000000
-#define PLL_RESET 0x40000000
-#define CPC0_PLLMR1_PLLR 0x40000000
-/* Feedback multiplier */
-#define PLL_FBKDIV 0x00F00000
-#define CPC0_PLLMR1_FBDV 0x00F00000
-#define PLL_FBKDIV_16 0x00000000
-#define PLL_FBKDIV_1 0x00100000
-#define PLL_FBKDIV_2 0x00200000
-#define PLL_FBKDIV_3 0x00300000
-#define PLL_FBKDIV_4 0x00400000
-#define PLL_FBKDIV_5 0x00500000
-#define PLL_FBKDIV_6 0x00600000
-#define PLL_FBKDIV_7 0x00700000
-#define PLL_FBKDIV_8 0x00800000
-#define PLL_FBKDIV_9 0x00900000
-#define PLL_FBKDIV_10 0x00A00000
-#define PLL_FBKDIV_11 0x00B00000
-#define PLL_FBKDIV_12 0x00C00000
-#define PLL_FBKDIV_13 0x00D00000
-#define PLL_FBKDIV_14 0x00E00000
-#define PLL_FBKDIV_15 0x00F00000
-/* Forward A divisor */
-#define PLL_FWDDIVA 0x00070000
-#define CPC0_PLLMR1_FWDVA 0x00070000
-#define PLL_FWDDIVA_8 0x00000000
-#define PLL_FWDDIVA_7 0x00010000
-#define PLL_FWDDIVA_6 0x00020000
-#define PLL_FWDDIVA_5 0x00030000
-#define PLL_FWDDIVA_4 0x00040000
-#define PLL_FWDDIVA_3 0x00050000
-#define PLL_FWDDIVA_2 0x00060000
-#define PLL_FWDDIVA_1 0x00070000
-/* Forward B divisor */
-#define PLL_FWDDIVB 0x00007000
-#define CPC0_PLLMR1_FWDVB 0x00007000
-#define PLL_FWDDIVB_8 0x00000000
-#define PLL_FWDDIVB_7 0x00001000
-#define PLL_FWDDIVB_6 0x00002000
-#define PLL_FWDDIVB_5 0x00003000
-#define PLL_FWDDIVB_4 0x00004000
-#define PLL_FWDDIVB_3 0x00005000
-#define PLL_FWDDIVB_2 0x00006000
-#define PLL_FWDDIVB_1 0x00007000
-/* PLL tune bits */
-#define PLL_TUNE_MASK 0x000003FF
-#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */
-#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */
-#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */
-#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */
-#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */
-#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */
-#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */
-
-/* Defines for CPC0_PLLMR0 Register fields */
-/* CPU divisor */
-#define PLL_CPUDIV 0x00300000
-#define CPC0_PLLMR0_CCDV 0x00300000
-#define PLL_CPUDIV_1 0x00000000
-#define PLL_CPUDIV_2 0x00100000
-#define PLL_CPUDIV_3 0x00200000
-#define PLL_CPUDIV_4 0x00300000
-/* PLB divisor */
-#define PLL_PLBDIV 0x00030000
-#define CPC0_PLLMR0_CBDV 0x00030000
-#define PLL_PLBDIV_1 0x00000000
-#define PLL_PLBDIV_2 0x00010000
-#define PLL_PLBDIV_3 0x00020000
-#define PLL_PLBDIV_4 0x00030000
-/* OPB divisor */
-#define PLL_OPBDIV 0x00003000
-#define CPC0_PLLMR0_OPDV 0x00003000
-#define PLL_OPBDIV_1 0x00000000
-#define PLL_OPBDIV_2 0x00001000
-#define PLL_OPBDIV_3 0x00002000
-#define PLL_OPBDIV_4 0x00003000
-/* EBC divisor */
-#define PLL_EXTBUSDIV 0x00000300
-#define CPC0_PLLMR0_EPDV 0x00000300
-#define PLL_EXTBUSDIV_2 0x00000000
-#define PLL_EXTBUSDIV_3 0x00000100
-#define PLL_EXTBUSDIV_4 0x00000200
-#define PLL_EXTBUSDIV_5 0x00000300
-/* MAL divisor */
-#define PLL_MALDIV 0x00000030
-#define CPC0_PLLMR0_MPDV 0x00000030
-#define PLL_MALDIV_1 0x00000000
-#define PLL_MALDIV_2 0x00000010
-#define PLL_MALDIV_3 0x00000020
-#define PLL_MALDIV_4 0x00000030
-/* PCI divisor */
-#define PLL_PCIDIV 0x00000003
-#define CPC0_PLLMR0_PPFD 0x00000003
-#define PLL_PCIDIV_1 0x00000000
-#define PLL_PCIDIV_2 0x00000001
-#define PLL_PCIDIV_3 0x00000002
-#define PLL_PCIDIV_4 0x00000003
-
-/*
- * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
- * assuming a 33.3MHz input clock to the 405EP.
- */
-#define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
- PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_266_133_66 (PLL_FBKDIV_8 | \
- PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-
-#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
- PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \
- PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
- PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \
- PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
- PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \
- PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
- PLL_MALDIV_1 | PLL_PCIDIV_2)
-#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \
- PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
- PLL_MALDIV_1 | PLL_PCIDIV_3)
-#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
- PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
-#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
- PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
- PLL_MALDIV_1 | PLL_PCIDIV_1)
-#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
- PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
- PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
-
-#endif /* _PPC405EP_H_ */
diff --git a/arch/powerpc/include/asm/ppc405ex.h b/arch/powerpc/include/asm/ppc405ex.h
deleted file mode 100644
index 083405c..0000000
--- a/arch/powerpc/include/asm/ppc405ex.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC405EX_H_
-#define _PPC405EX_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
-
-#define CONFIG_NAND_NDFC
-
-/* Memory mapped register */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0800)
-
-/* SDR */
-#define SDR0_SDCS0 0x0060
-#define SDR0_UART0 0x0120 /* UART0 Config */
-#define SDR0_UART1 0x0121 /* UART1 Config */
-#define SDR0_SRST 0x0200
-#define SDR0_CUST0 0x4000
-#define SDR0_PFC0 0x4100
-#define SDR0_PFC1 0x4101
-#define SDR0_MFR 0x4300 /* SDR0_MFR reg */
-
-#define SDR0_ECID0 0x0080
-#define SDR0_ECID1 0x0081
-#define SDR0_ECID2 0x0082
-#define SDR0_ECID3 0x0083
-
-#define SDR0_SDCS_SDD (0x80000000 >> 31)
-
-#define SDR0_SRST_DMC (0x80000000 >> 10)
-
-#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
-#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
-#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
-#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-
-#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
-#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
-#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
-
-#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
-#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width= 16 Bit */
-#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width= 8 Bit */
-
-#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
-#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((u32)(n)) & 0xF) << 24)
-#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((u32)(n)) >> 24) & 0xF)
-
-#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
-#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((u32)(n)) & 0x3) << 22)
-#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((u32)(n)) >> 22) & 0x3)
-
-#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
-
-#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
-#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
-#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
-
-#define SDR0_PFC1_U1ME 0x02000000
-#define SDR0_PFC1_U0ME 0x00080000
-#define SDR0_PFC1_U0IM 0x00040000
-#define SDR0_PFC1_SIS 0x00020000
-#define SDR0_PFC1_DMAAEN 0x00010000
-#define SDR0_PFC1_DMADEN 0x00008000
-#define SDR0_PFC1_USBEN 0x00004000
-#define SDR0_PFC1_AHBSWAP 0x00000020
-#define SDR0_PFC1_USBBIGEN 0x00000010
-#define SDR0_PFC1_GPT_FREQ 0x0000000f
-
-#endif /* _PPC405EX_H_ */
diff --git a/arch/powerpc/include/asm/ppc405ez.h b/arch/powerpc/include/asm/ppc405ez.h
deleted file mode 100644
index 40cf8ed..0000000
--- a/arch/powerpc/include/asm/ppc405ez.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC405EZ_H_
-#define _PPC405EZ_H_
-
-#define CONFIG_NAND_NDFC
-
-/* Memory mapped register */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
-#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0800)
-
-/* DCR register */
-#define OCM0_PLBCR1 0x0020 /* OCM PLB3 Bank 1 Config */
-#define OCM0_PLBCR2 0x0021 /* OCM PLB3 Bank 2 Config */
-#define OCM0_PLBBEAR 0x0022 /* OCM PLB3 Bus Error Add */
-#define OCM0_DSRC1 0x0028 /* OCM D-side Bank 1 Config */
-#define OCM0_DSRC2 0x0029 /* OCM D-side Bank 2 Config */
-#define OCM0_ISRC1 0x002A /* OCM I-side Bank 1Config */
-#define OCM0_ISRC2 0x002B /* OCM I-side Bank 2 Config */
-#define OCM0_DISDPC 0x002C /* OCM D-/I-side Data Par Chk */
-
-/* SDR register */
-#define SDR0_NAND0 0x4000
-#define SDR0_ULTRA0 0x4040
-#define SDR0_ULTRA1 0x4050
-#define SDR0_ICINTSTAT 0x4510
-
-/* CPR register */
-#define CPR0_PRIMAD 0x0080
-#define CPR0_PERD0 0x00e0
-#define CPR0_PERD1 0x00e1
-#define CPR0_PERC0 0x0180
-
-#define MAL_DCR_BASE 0x380
-
-#define SDR_NAND0_NDEN 0x80000000
-#define SDR_NAND0_NDBTEN 0x40000000
-#define SDR_NAND0_NDBADR_MASK 0x30000000
-#define SDR_NAND0_NDBPG_MASK 0x0f000000
-#define SDR_NAND0_NDAREN 0x00800000
-#define SDR_NAND0_NDRBEN 0x00400000
-
-#define SDR_ULTRA0_NDGPIOBP 0x80000000
-#define SDR_ULTRA0_CSN_MASK 0x78000000
-#define SDR_ULTRA0_CSNSEL0 0x40000000
-#define SDR_ULTRA0_CSNSEL1 0x20000000
-#define SDR_ULTRA0_CSNSEL2 0x10000000
-#define SDR_ULTRA0_CSNSEL3 0x08000000
-#define SDR_ULTRA0_EBCRDYEN 0x04000000
-#define SDR_ULTRA0_SPISSINEN 0x02000000
-#define SDR_ULTRA0_NFSRSTEN 0x01000000
-
-#define SDR_ULTRA1_LEDNENABLE 0x40000000
-
-#define SDR_ICRX_STAT 0x80000000
-#define SDR_ICTX0_STAT 0x40000000
-#define SDR_ICTX1_STAT 0x20000000
-
-#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */
-#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */
-#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
-
-#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
-
-#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
-#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
-#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
-
-#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */
-#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */
-#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */
-#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */
-
-#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */
-#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */
-#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */
-#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */
-
-#endif /* _PPC405EZ_H_ */
diff --git a/arch/powerpc/include/asm/ppc405gp.h b/arch/powerpc/include/asm/ppc405gp.h
deleted file mode 100644
index 0044a3a..0000000
--- a/arch/powerpc/include/asm/ppc405gp.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC405GP_H_
-#define _PPC405GP_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */
-
-/* Memory mapped register */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
-
-/* DCR's */
-#define DCP0_CFGADDR 0x0014 /* Decompression controller addr reg */
-#define DCP0_CFGDATA 0x0015 /* Decompression controller data reg */
-#define OCM0_ISCNTL 0x0019 /* OCM I-side control reg */
-#define OCM0_DSARC 0x001a /* OCM D-side address compare */
-#define OCM0_DSCNTL 0x001b /* OCM D-side control */
-#define CPC0_PLLMR 0x00b0 /* PLL mode register */
-#define CPC0_CR0 0x00b1 /* chip control register 0 */
-#define CPC0_CR1 0x00b2 /* chip control register 1 */
-#define CPC0_PSR 0x00b4 /* chip pin strapping reg */
-#define CPC0_EIRR 0x00b6 /* ext interrupt routing reg */
-#define CPC0_SR 0x00b8 /* Power management status */
-#define CPC0_ER 0x00b9 /* Power management enable */
-#define CPC0_FR 0x00ba /* Power management force */
-#define CPC0_ECR 0x00aa /* edge conditioner register */
-
-/* values for kiar register - indirect addressing of these regs */
-#define KCONF 0x40 /* decompression core config register */
-
-#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
-#define PLLMR_FWD_DIV_BYPASS 0xE0000000
-#define PLLMR_FWD_DIV_3 0xA0000000
-#define PLLMR_FWD_DIV_4 0x80000000
-#define PLLMR_FWD_DIV_6 0x40000000
-
-#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
-#define PLLMR_FB_DIV_1 0x02000000
-#define PLLMR_FB_DIV_2 0x04000000
-#define PLLMR_FB_DIV_3 0x06000000
-#define PLLMR_FB_DIV_4 0x08000000
-
-#define PLLMR_TUNING_MASK 0x01F80000
-
-#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
-#define PLLMR_CPU_PLB_DIV_1 0x00000000
-#define PLLMR_CPU_PLB_DIV_2 0x00020000
-#define PLLMR_CPU_PLB_DIV_3 0x00040000
-#define PLLMR_CPU_PLB_DIV_4 0x00060000
-
-#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
-#define PLLMR_OPB_PLB_DIV_1 0x00000000
-#define PLLMR_OPB_PLB_DIV_2 0x00008000
-#define PLLMR_OPB_PLB_DIV_3 0x00010000
-#define PLLMR_OPB_PLB_DIV_4 0x00018000
-
-#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
-#define PLLMR_PCI_PLB_DIV_1 0x00000000
-#define PLLMR_PCI_PLB_DIV_2 0x00002000
-#define PLLMR_PCI_PLB_DIV_3 0x00004000
-#define PLLMR_PCI_PLB_DIV_4 0x00006000
-
-#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
-#define PLLMR_EXB_PLB_DIV_2 0x00000000
-#define PLLMR_EXB_PLB_DIV_3 0x00000800
-#define PLLMR_EXB_PLB_DIV_4 0x00001000
-#define PLLMR_EXB_PLB_DIV_5 0x00001800
-
-/* definitions for PPC405GPr (new mode strapping) */
-#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
-
-#define PSR_PLL_FWD_MASK 0xC0000000
-#define PSR_PLL_FDBACK_MASK 0x30000000
-#define PSR_PLL_TUNING_MASK 0x0E000000
-#define PSR_PLB_CPU_MASK 0x01800000
-#define PSR_OPB_PLB_MASK 0x00600000
-#define PSR_PCI_PLB_MASK 0x00180000
-#define PSR_EB_PLB_MASK 0x00060000
-#define PSR_ROM_WIDTH_MASK 0x00018000
-#define PSR_ROM_LOC 0x00004000
-#define PSR_PCI_ASYNC_EN 0x00001000
-#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */
-#define PSR_PCI_ARBIT_EN 0x00000400
-#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
-
-#endif /* _PPC405GP_H_ */
diff --git a/arch/powerpc/include/asm/ppc440.h b/arch/powerpc/include/asm/ppc440.h
deleted file mode 100644
index 0cfa88b..0000000
--- a/arch/powerpc/include/asm/ppc440.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * (C) Copyright 2006
- * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0 IBM-pibs
- */
-
-#ifndef __PPC440_H__
-#define __PPC440_H__
-
-#define CONFIG_SYS_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */
-
-/*
- * DCRs & Related
- */
-
-/* Memory mapped registers */
-#define PCIL0_CFGADR (CONFIG_SYS_PCI_BASE + 0x0ec00000)
-#define PCIL0_CFGDATA (CONFIG_SYS_PCI_BASE + 0x0ec00004)
-#define PCIL0_CFGBASE (CONFIG_SYS_PCI_BASE + 0x0ec80000)
-#define PCIL0_IOBASE (CONFIG_SYS_PCI_BASE + 0x08000000)
-
-/* DCR registers */
-
-/* CPR register declarations */
-#define CPR0_PLLC 0x0040
-#define CPR0_PLLD 0x0060
-#define CPR0_PRIMAD0 0x0080
-#define CPR0_PRIMBD0 0x00a0
-#define CPR0_OPBD0 0x00c0
-#define CPR0_PERD 0x00e0
-#define CPR0_MALD 0x0100
-#define CPR0_SPCID 0x0120
-#define CPR0_ICFG 0x0140
-
-/* SDR register definations */
-#define SDR0_SDSTP0 0x0020
-#define SDR0_SDSTP1 0x0021
-#define SDR0_PINSTP 0x0040
-#define SDR0_SDCS0 0x0060
-#define SDR0_ECID0 0x0080
-#define SDR0_ECID1 0x0081
-#define SDR0_ECID2 0x0082
-#define SDR0_ECID3 0x0083
-#define SDR0_DDR0 0x00e1
-#define SDR0_EBC 0x0100
-#define SDR0_UART0 0x0120
-#define SDR0_UART1 0x0121
-#define SDR0_UART2 0x0122
-#define SDR0_UART3 0x0123
-#define SDR0_CP440 0x0180
-#define SDR0_XCR 0x01c0
-#define SDR0_XCR0 0x01c0
-#define SDR0_XPLLC 0x01c1
-#define SDR0_XPLLD 0x01c2
-#define SDR0_SRST 0x0200
-#define SDR0_SRST0 SDR0_SRST
-#define SDR0_SRST1 0x0201
-#define SDR0_AMP0 0x0240
-#define SDR0_AMP1 0x0241
-#define SDR0_USB0 0x0320
-#define SDR0_CUST0 0x4000
-#define SDR0_CUST1 0x4002
-#define SDR0_CUST2 0x4004
-#define SDR0_CUST3 0x4006
-#define SDR0_PFC0 0x4100
-#define SDR0_PFC1 0x4101
-#define SDR0_PFC2 0x4102
-#define SDR0_PFC4 0x4104
-#define SDR0_MFR 0x4300
-
-#define SDR0_DDR0_DDRM_DECODE(n) ((((u32)(n)) >> 29) & 0x03)
-
-#define SDR0_PCI0_PAE_MASK (0x80000000 >> 0)
-#define SDR0_XCR0_PAE_MASK (0x80000000 >> 0)
-
-#define SDR0_PFC0_GEIE_MASK 0x00003e00
-#define SDR0_PFC0_GEIE_TRE 0x00003e00
-#define SDR0_PFC0_GEIE_NOTRE 0x00000000
-#define SDR0_PFC0_TRE_MASK (0x80000000 >> 23)
-#define SDR0_PFC0_TRE_DISABLE 0x00000000
-#define SDR0_PFC0_TRE_ENABLE (0x80000000 >> 23)
-
-/*
- * Core Configuration/MMU configuration for 440
- */
-#define CCR0_DAPUIB 0x00100000
-#define CCR0_DTB 0x00008000
-
-#define SDR0_SDCS_SDD (0x80000000 >> 31)
-
-/* todo: move this code from macro offsets to struct */
-#define PCIL0_VENDID (PCIL0_CFGBASE + PCI_VENDOR_ID )
-#define PCIL0_DEVID (PCIL0_CFGBASE + PCI_DEVICE_ID )
-#define PCIL0_CMD (PCIL0_CFGBASE + PCI_COMMAND )
-#define PCIL0_STATUS (PCIL0_CFGBASE + PCI_STATUS )
-#define PCIL0_REVID (PCIL0_CFGBASE + PCI_REVISION_ID )
-#define PCIL0_CLS (PCIL0_CFGBASE + PCI_CLASS_CODE)
-#define PCIL0_CACHELS (PCIL0_CFGBASE + PCI_CACHE_LINE_SIZE )
-#define PCIL0_LATTIM (PCIL0_CFGBASE + PCI_LATENCY_TIMER )
-#define PCIL0_HDTYPE (PCIL0_CFGBASE + PCI_HEADER_TYPE )
-#define PCIL0_BIST (PCIL0_CFGBASE + PCI_BIST )
-#define PCIL0_BAR0 (PCIL0_CFGBASE + PCI_BASE_ADDRESS_0 )
-#define PCIL0_BAR1 (PCIL0_CFGBASE + PCI_BASE_ADDRESS_1 )
-#define PCIL0_BAR2 (PCIL0_CFGBASE + PCI_BASE_ADDRESS_2 )
-#define PCIL0_BAR3 (PCIL0_CFGBASE + PCI_BASE_ADDRESS_3 )
-#define PCIL0_BAR4 (PCIL0_CFGBASE + PCI_BASE_ADDRESS_4 )
-#define PCIL0_BAR5 (PCIL0_CFGBASE + PCI_BASE_ADDRESS_5 )
-#define PCIL0_CISPTR (PCIL0_CFGBASE + PCI_CARDBUS_CIS )
-#define PCIL0_SBSYSVID (PCIL0_CFGBASE + PCI_SUBSYSTEM_VENDOR_ID )
-#define PCIL0_SBSYSID (PCIL0_CFGBASE + PCI_SUBSYSTEM_ID )
-#define PCIL0_EROMBA (PCIL0_CFGBASE + PCI_ROM_ADDRESS )
-#define PCIL0_CAP (PCIL0_CFGBASE + PCI_CAPABILITY_LIST )
-#define PCIL0_RES0 (PCIL0_CFGBASE + 0x0035 )
-#define PCIL0_RES1 (PCIL0_CFGBASE + 0x0036 )
-#define PCIL0_RES2 (PCIL0_CFGBASE + 0x0038 )
-#define PCIL0_INTLN (PCIL0_CFGBASE + PCI_INTERRUPT_LINE )
-#define PCIL0_INTPN (PCIL0_CFGBASE + PCI_INTERRUPT_PIN )
-
-#define PCIL0_MINGNT (PCIL0_CFGBASE + PCI_MIN_GNT )
-#define PCIL0_MAXLTNCY (PCIL0_CFGBASE + PCI_MAX_LAT )
-
-#define PCIL0_POM0LAL (PCIL0_CFGBASE + 0x0068)
-#define PCIL0_POM0LAH (PCIL0_CFGBASE + 0x006c)
-#define PCIL0_POM0SA (PCIL0_CFGBASE + 0x0070)
-#define PCIL0_POM0PCIAL (PCIL0_CFGBASE + 0x0074)
-#define PCIL0_POM0PCIAH (PCIL0_CFGBASE + 0x0078)
-#define PCIL0_POM1LAL (PCIL0_CFGBASE + 0x007c)
-#define PCIL0_POM1LAH (PCIL0_CFGBASE + 0x0080)
-#define PCIL0_POM1SA (PCIL0_CFGBASE + 0x0084)
-#define PCIL0_POM1PCIAL (PCIL0_CFGBASE + 0x0088)
-#define PCIL0_POM1PCIAH (PCIL0_CFGBASE + 0x008c)
-#define PCIL0_POM2SA (PCIL0_CFGBASE + 0x0090)
-
-#define PCIL0_PIM0SA (PCIL0_CFGBASE + 0x0098)
-#define PCIL0_PIM0LAL (PCIL0_CFGBASE + 0x009c)
-#define PCIL0_PIM0LAH (PCIL0_CFGBASE + 0x00a0)
-#define PCIL0_PIM1SA (PCIL0_CFGBASE + 0x00a4)
-#define PCIL0_PIM1LAL (PCIL0_CFGBASE + 0x00a8)
-#define PCIL0_PIM1LAH (PCIL0_CFGBASE + 0x00ac)
-#define PCIL0_PIM2SA (PCIL0_CFGBASE + 0x00b0)
-#define PCIL0_PIM2LAL (PCIL0_CFGBASE + 0x00b4)
-#define PCIL0_PIM2LAH (PCIL0_CFGBASE + 0x00b8)
-
-#define PCIL0_STS (PCIL0_CFGBASE + 0x00e0)
-
-#endif /* __PPC440_H__ */
diff --git a/arch/powerpc/include/asm/ppc440ep_gr.h b/arch/powerpc/include/asm/ppc440ep_gr.h
deleted file mode 100644
index c2c3abb..0000000
--- a/arch/powerpc/include/asm/ppc440ep_gr.h
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC440EP_GR_H_
-#define _PPC440EP_GR_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
-
-#define CONFIG_NAND_NDFC
-
-/*
- * Some SoC specific registers (not common for all 440 SoC's)
- */
-
-/* Memory mapped registers */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_PERIPHERAL_BASE + 0x0500)
-#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_PERIPHERAL_BASE + 0x0600)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0b00)
-#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0c00)
-
-/* SDR's */
-#define SDR0_PCI0 0x0300
-#define SDR0_SDSTP2 0x4001
-#define SDR0_SDSTP3 0x4003
-
-#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
-#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
-
-/* Pin Function Control Register 1 */
-#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
-#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
-#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
-#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
-#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
-#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
-#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
-#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
-#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
-#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
-#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
-#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
-#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold
- Req Selection */
-#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
-#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
-#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5)
- Selection */
-#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
-#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
-#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27)
- Selection */
-#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En.
- Selected */
-#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
-#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject
- Selection */
-#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject
- Disable */
-#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject
- Enable */
-#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor Enable
- Selection */
-#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor
- Enable */
-#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor
- Enable */
-#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation
- Gated In */
-
-/* USB Control Register */
-#define SDR0_USB0_USB_DEVSEL_MASK 0x00000002 /* USB Device Selection */
-#define SDR0_USB0_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
-#define SDR0_USB0_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
-#define SDR0_USB0_LEEN_MASK 0x00000001 /* Little Endian selection */
-#define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
-#define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
-
-/* Miscealleneaous Function Reg. */
-#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
-#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
-#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
-#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
-#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
-#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
-#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
-#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
-#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
-#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
-#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
-#define SDR0_MFR_ZM_ENCODE(n) ((((u32)(n)) & 0x3) << 24)
-#define SDR0_MFR_ZM_DECODE(n) ((((u32)(n)) << 24) & 0x3)
-
-#define SDR0_MFR_ERRATA3_EN0 0x00800000
-#define SDR0_MFR_ERRATA3_EN1 0x00400000
-#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
-#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Ena. on both EMAC3 0-1 */
-#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
-#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
-#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
-
-/* CUST0 Customer Configuration Register0 */
-#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
-#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
-#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
-#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-
-#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
-#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
-#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
-
-#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
-#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
-#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
-
-#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
-#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((u32)(n)) & 0xF) << 24)
-#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((u32)(n)) >> 24) & 0xF)
-
-#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
-#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((u32)(n)) & 0x3) << 22)
-#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((u32)(n)) >> 22) & 0x3)
-
-#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
-
-#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
-#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
-#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
-
-#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
-#define SDR0_CUST0_NDRSC_ENCODE(n) ((((u32)(n)) & 0xFFF) << 4)
-#define SDR0_CUST0_NDRSC_DECODE(n) ((((u32)(n)) >> 4) & 0xFFF)
-
-#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
-#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
-#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /*All Chip Select Gating Enable*/
-#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
-
-#define SDR0_SRST_DMC 0x00200000
-
-#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
-#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
-#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
-#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
-#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
-#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
-
-#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
-#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
-#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
-#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
-#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
-#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
-
-#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
-#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */
-#define PRADV_MASK 0x07000000 /* Primary Divisor A */
-#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
-#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
-
-/* Strap 1 Register */
-#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
-#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
-#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
-#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */
-#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
-#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
-#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
-#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
-#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
-#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
-#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
-#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
-#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
-#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
-#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
-#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
-#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-
-#define CPR0_ICFG_RLI_MASK 0x80000000
-#define CPR0_ICFG_ICS_MASK 0x00000007
-#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
-#define CPR0_SPCID_SPCIDV0_DIV1 0x01000000
-#define CPR0_SPCID_SPCIDV0_DIV2 0x02000000
-#define CPR0_SPCID_SPCIDV0_DIV3 0x03000000
-#define CPR0_SPCID_SPCIDV0_DIV4 0x00000000
-#define CPR0_PERD_PERDV0_MASK 0x07000000
-
-#define PCI_MMIO_LCR_BASE (CONFIG_SYS_PCI_BASE + 0x0f400000) /* Real =>
- 0x0EF400000 */
-
-/* PCI Master Local Configuration Registers */
-#define PCIL0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
-#define PCIL0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
-#define PCIL0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
-#define PCIL0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
-#define PCIL0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
-#define PCIL0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
-#define PCIL0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
-#define PCIL0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
-#define PCIL0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
-#define PCIL0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
-#define PCIL0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
-#define PCIL0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
-
-/* PCI Target Local Configuration Registers */
-#define PCIL0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/
- Attribute */
-#define PCIL0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
-#define PCIL0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/
- Attribute */
-#define PCIL0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
-
-#endif /* _PPC440EP_GR_H_ */
diff --git a/arch/powerpc/include/asm/ppc440epx_grx.h b/arch/powerpc/include/asm/ppc440epx_grx.h
deleted file mode 100644
index 93c3e2e..0000000
--- a/arch/powerpc/include/asm/ppc440epx_grx.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC440EPX_GRX_H_
-#define _PPC440EPX_GRX_H_
-
-#define CONFIG_SDRAM_PPC4xx_DENALI_DDR2 /* Denali DDR(2) controller */
-
-#define CONFIG_NAND_NDFC
-
-/*
- * Some SoC specific registers (not common for all 440 SoC's)
- */
-
-/* Memory mapped registers */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
-
-#define SPI0_MODE (CONFIG_SYS_PERIPHERAL_BASE + 0x0090)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_PERIPHERAL_BASE + 0x0500)
-#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_PERIPHERAL_BASE + 0x0600)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0b00)
-#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0c00)
-
-/* DCR */
-#define CPM0_ER 0x00b0
-#define CPM1_ER 0x00f0
-#define PLB3A0_ACR 0x0077
-#define PLB4A0_ACR 0x0081
-#define PLB4A1_ACR 0x0089
-#define OPB2PLB40_BCTRL 0x0350
-#define P4P3BO0_CFG 0x0026
-
-/* SDR */
-#define SDR0_DDRCFG 0x00e0
-#define SDR0_PCI0 0x0300
-#define SDR0_SDSTP2 0x4001
-#define SDR0_SDSTP3 0x4003
-#define SDR0_EMAC0RXST 0x4301
-#define SDR0_EMAC0TXST 0x4302
-#define SDR0_CRYP0 0x4500
-
-#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
-#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
-
-/* Pin Function Control Register 1 */
-#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
-#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
-#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
-#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select
- EMAC 0 */
-#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII
- bridge */
-#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII
- bridge */
-#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
-#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
-#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
-#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
-#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
-#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
-#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
-#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
-#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
-#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold
- Req Selection */
-#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
-#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
-#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5)
- Selection */
-#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
-#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
-#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27)
- Selection */
-#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En.
- Selected */
-#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
-#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject
- Selection */
-#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject
- Disable */
-#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject
- Enable */
-#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor Enable
- Selection */
-#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor
- Enable */
-#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor
- Enable */
-#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation
- Gated In */
-
-#define SDR0_PFC2_SELECT_MASK 0xe0000000 /* Ethernet Pin select EMAC1 */
-#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_4 0xa0000000 /* 2xRGMII using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_5 0xc0000000 /* 2xRTBI using RGMII bridge */
-#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */
-
-#define SDR0_USB2D0CR 0x0320
-#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC
- Master Selection */
-#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection*/
-#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */
-
-#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface
- Selection */
-#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
-#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
-
-#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */
-#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
-#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
-
-/* USB2 Host Control Register */
-#define SDR0_USB2H0CR 0x0340
-#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface*/
-#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */
-#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */
-#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length
- Adjustment */
-/* USB2PHY0 Control Register */
-#define SDR0_USB2PHY0CR 0x4103
-#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000
-
- /* PHY UTMI interface connection */
-#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */
-#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */
-
-#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */
-#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */
-#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */
-
-/* VBus detect (Device mode only) */
-#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000
-/* Pull-up resistance on D+ is disabled */
-#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000
-/* Pull-up resistance on D+ is enabled */
-#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000
-
-/* PHY UTMI data width and clock select */
-#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000
-#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */
-#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */
-
-#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */
-#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */
-/* Loop back enabled (only test purposes) */
-#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000
-
-/* Force XO block on during a suspend */
-#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000
-#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */
-/* PHY XO block is powered-off when all ports are suspended */
-#define SDR0_USB2PHY0CR_XO_OFF 0x04000000
-
-#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */
-#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */
-#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only
- for full-speed operation */
-
-#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock
- source */
-#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal
- 48M clock as a reference */
-#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO
- block output as a reference */
-
-#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO
- block*/
-#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external
- clock */
-#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock
- from a crystal */
-
-#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */
-#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq
- = 12 MHz */
-#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq
- = 48 MHz */
-#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq
- = 24 MHz */
-
-/* USB2.0 Device */
-/*
- * todo: check if this can be completely removed, only used in
- * cpu/ppc4xx/usbdev.c. And offsets are completely wrong. This could
- * never have actually worked. Best probably is to remove this
- * usbdev.c file completely (and these defines).
- */
-#define USB2D0_BASE CONFIG_SYS_USB2D0_BASE
-
-#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000)
-
-#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for
- Endpoint 0 plus IN Endpoints 1 to 3 */
-#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management
- register */
-#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address
- register */
-#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable
- register for USB2D0_INTRIN */
-#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for
- OUT Endpoints 1 to 3 */
-#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable
- register for USB2D0_INTRUSB */
-#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for
- common USB interrupts */
-#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable
- register for IntrOut */
-#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0
- test modes */
-#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for
- selecting the Endpoint status/control registers */
-#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */
-#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status
- register for Endpoint 0. (Index register set to select Endpoint 0) */
-#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status
- register for IN Endpoint. (Index register set to select Endpoints 13) */
-#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet
- size for IN Endpoint. (Index register set to select Endpoints 13) */
-#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status
- register for OUT Endpoint. (Index register set to select Endpoints 13) */
-#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet
- size for OUT Endpoint. (Index register set to select Endpoints 13) */
-#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received
- bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */
-#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in
- OUT Endpoint FIFO. (Index register set to select Endpoints 13) */
-
-/* Miscealleneaous Function Reg. */
-#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
-#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
-#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
-#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
-#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
-#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
-#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
-#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
-#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
-#define SDR0_MFR_ZM_ENCODE(n) ((((u32)(n)) & 0x3) << 24)
-#define SDR0_MFR_ZM_DECODE(n) ((((u32)(n)) << 24) & 0x3)
-#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
-#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Ena. on both EMAC3 0-1 */
-#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
-#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
-#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
-
-/* CUST0 Customer Configuration Register0 */
-#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
-#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
-#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
-#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-
-#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
-#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
-#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
-
-#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
-#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
-#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
-
-#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
-#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((u32)(n)) & 0xF) << 24)
-#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((u32)(n)) >> 24) & 0xF)
-
-#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
-#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((u32)(n)) & 0x3) << 22)
-#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((u32)(n)) >> 22) & 0x3)
-
-#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
-
-#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
-#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
-#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
-
-#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
-#define SDR0_CUST0_NDRSC_ENCODE(n) ((((u32)(n)) & 0xFFF) << 4)
-#define SDR0_CUST0_NDRSC_DECODE(n) ((((u32)(n)) >> 4) & 0xFFF)
-
-#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
-#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
-#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /*All Chip Select Gating Enable*/
-#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
-
-#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
-#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
-#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
-#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
-#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/
- transmitter 0 */
-#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/
- transmitter 1 */
-#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
-#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */
-#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */
-#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
-#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
-#define SDR0_SRST0_PCI 0x00100000 /* PCI */
-#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */
-#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */
-#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
-#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */
-#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */
-#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */
-#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */
-#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */
-#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */
-#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */
-#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */
-#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
-#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */
-#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
-#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */
-#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */
-#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */
-#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/
- transmitter 2 */
-#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/
- transmitter 3 */
-
-#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */
-#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */
-#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */
-#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0
-#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */
-#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */
-#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4
- USB 2.0 Host */
-#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to
- USB 2.0 Host */
-#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to
- USB 2.0 Host */
-#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */
-#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2*/
-#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */
-#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */
-#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */
-#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */
-#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */
-#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */
-#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */
-#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
-#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
-
-#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
-#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
-#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
-#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
-#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
-#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
-
-#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
-#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
-#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
-#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
-#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
-#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
-
-#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
-#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */
-#define PRADV_MASK 0x07000000 /* Primary Divisor A */
-#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
-#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
-
-/* Strap 1 Register */
-#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
-#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
-#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
-#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */
-#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
-#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
-#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
-#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
-#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
-#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
-#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
-#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
-#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
-#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
-#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
-#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
-#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-
-#define CPR0_ICFG_RLI_MASK 0x80000000
-#define CPR0_ICFG_ICS_MASK 0x00000007
-#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
-#define CPR0_SPCID_SPCIDV0_DIV1 0x01000000
-#define CPR0_SPCID_SPCIDV0_DIV2 0x02000000
-#define CPR0_SPCID_SPCIDV0_DIV3 0x03000000
-#define CPR0_SPCID_SPCIDV0_DIV4 0x00000000
-#define CPR0_PERD_PERDV0_MASK 0x07000000
-
-#define PCI_MMIO_LCR_BASE (CONFIG_SYS_PCI_BASE + 0x0f400000) /* Real =>
- 0x0EF400000 */
-
-/* PCI Master Local Configuration Registers */
-#define PCIL0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
-#define PCIL0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
-#define PCIL0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
-#define PCIL0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
-#define PCIL0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
-#define PCIL0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
-#define PCIL0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
-#define PCIL0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
-#define PCIL0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
-#define PCIL0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
-#define PCIL0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
-#define PCIL0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
-
-/* PCI Target Local Configuration Registers */
-#define PCIL0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/
- Attribute */
-#define PCIL0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
-#define PCIL0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/
- Attribute */
-#define PCIL0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
-
-/* 440EPx boot strap options */
-#define BOOT_STRAP_OPTION_A 0x00000000
-#define BOOT_STRAP_OPTION_B 0x00000001
-#define BOOT_STRAP_OPTION_D 0x00000003
-#define BOOT_STRAP_OPTION_E 0x00000004
-
-#endif /* _PPC440EPX_GRX_H_ */
diff --git a/arch/powerpc/include/asm/ppc440gp.h b/arch/powerpc/include/asm/ppc440gp.h
deleted file mode 100644
index 01b66c0..0000000
--- a/arch/powerpc/include/asm/ppc440gp.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC440GP_H_
-#define _PPC440GP_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
-
-/*
- * Some SoC specific registers (not common for all 440 SoC's)
- */
-
-/* Memory mapped register */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
-
-#define SDR0_PCI0 0x0300
-
-#define CPC0_STRP1_PAE_MASK (0x80000000 >> 11)
-#define CPC0_STRP1_PISE_MASK (0x80000000 >> 13)
-
-#define CNTRL_DCR_BASE 0x0b0
-
-#define CPC0_SYS0 (CNTRL_DCR_BASE + 0x30) /* System configuration reg 0 */
-#define CPC0_SYS1 (CNTRL_DCR_BASE + 0x31) /* System configuration reg 1 */
-
-#define CPC0_STRP0 (CNTRL_DCR_BASE + 0x34) /* Power-on config reg 0 (RO) */
-#define CPC0_STRP1 (CNTRL_DCR_BASE + 0x35) /* Power-on config reg 1 (RO) */
-
-#define CPC0_GPIO (CNTRL_DCR_BASE + 0x38) /* GPIO config reg (440GP) */
-
-#define CPC0_CR0 (CNTRL_DCR_BASE + 0x3b) /* Control 0 register */
-#define CPC0_CR1 (CNTRL_DCR_BASE + 0x3a) /* Control 1 register */
-
-#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
-#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
-#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
-#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
-#define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
-#define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
-#define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
-#define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
-#define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-
-#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
-#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
-
-#endif /* _PPC440GP_H_ */
diff --git a/arch/powerpc/include/asm/ppc440gx.h b/arch/powerpc/include/asm/ppc440gx.h
deleted file mode 100644
index 7bd36e8..0000000
--- a/arch/powerpc/include/asm/ppc440gx.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC440GX_H_
-#define _PPC440GX_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
-
-/*
- * Some SoC specific registers (not common for all 440 SoC's)
- */
-
-/* Memory mapped register */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
-
-/* SDR's */
-#define SDR0_PCI0 0x0300
-
-#define SDR0_SDSTP2 0x4001
-#define SDR0_SDSTP3 0x4003
-
-#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
-#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
-
-#define SDR0_PFC1_EPS_DECODE(n) ((((u32)(n)) >> 22) & 0x07)
-#define SDR0_PFC1_CTEMS_MASK (0x80000000 >> 11)
-#define SDR0_PFC1_CTEMS_EMS 0x00000000
-#define SDR0_PFC1_CTEMS_CPUTRACE (0x80000000 >> 11)
-
-#define SDR0_MFR_ECS_MASK 0x10000000
-
-#define SDR0_SRST_DMC 0x00200000
-
-#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
-#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
-#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
-#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
-#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
-#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
-
-#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
-#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
-#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
-#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
-#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
-#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
-
-#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
-#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */
-#define PRADV_MASK 0x07000000 /* Primary Divisor A */
-#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
-#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
-
-/* Strap 1 Register */
-#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
-#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
-#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
-#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */
-#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
-#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
-#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
-#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
-#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
-#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
-#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
-#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
-#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
-#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
-#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
-#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
-#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-
-#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
-#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
-
-#endif /* _PPC440GX_H_ */
diff --git a/arch/powerpc/include/asm/ppc440sp.h b/arch/powerpc/include/asm/ppc440sp.h
deleted file mode 100644
index 5c2192e..0000000
--- a/arch/powerpc/include/asm/ppc440sp.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC440SP_H_
-#define _PPC440SP_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
-
-/*
- * Some SoC specific registers (not common for all 440 SoC's)
- */
-
-/* Memory mapped register */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xf0000000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
-
-/* SDR's */
-#define SDR0_PCI0 0x0300
-#define SDR0_SDSTP2 0x0022
-#define SDR0_SDSTP3 0x0023
-
-#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
-#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
-
-#define SDR0_PFC1_EM_1000 (0x80000000 >> 10)
-
-#define SDR0_MFR_FIXD (0x80000000 >> 3) /* Workaround for PCI/DMA */
-
-#define SDR0_SRST0_DMC 0x00200000
-
-#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
-#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
-#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
-#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
-#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
-#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
-
-#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
-#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
-#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
-#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
-#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
-#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
-
-#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
-#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */
-#define PRADV_MASK 0x07000000 /* Primary Divisor A */
-#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
-#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
-
-/* Strap 1 Register */
-#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
-#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
-#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
-#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */
-#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
-#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
-#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
-#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
-#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
-#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
-#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
-#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
-#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
-#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
-#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
-#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
-#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-
-#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
-#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
-
-#endif /* _PPC440SP_H_ */
diff --git a/arch/powerpc/include/asm/ppc440spe.h b/arch/powerpc/include/asm/ppc440spe.h
deleted file mode 100644
index 105dc01..0000000
--- a/arch/powerpc/include/asm/ppc440spe.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC440SPE_H_
-#define _PPC440SPE_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
-
-/*
- * Some SoC specific registers (not common for all 440 SoC's)
- */
-
-/* Memory mapped register */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
-
-/* SDR's */
-#define SDR0_PCI0 0x0300
-#define SDR0_SDSTP2 0x0022
-#define SDR0_SDSTP3 0x0023
-
-#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
-#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
-#define SDR0_SDSTP1_ERPN_MASK (0x80000000 >> 12)
-#define SDR0_SDSTP1_ERPN_EBC 0
-#define SDR0_SDSTP1_ERPN_PCI (0x80000000 >> 12)
-#define SDR0_SDSTP1_EBCW_MASK (0x80000000 >> 24)
-#define SDR0_SDSTP1_EBCW_8_BITS 0
-#define SDR0_SDSTP1_EBCW_16_BITS (0x80000000 >> 24)
-
-#define SDR0_PFC1_EM_1000 (0x80000000 >> 10)
-
-#define SDR0_MFR_FIXD (0x80000000 >> 3) /* Workaround for PCI/DMA */
-
-#define SDR0_PINSTP_BOOTSTRAP_MASK 0xC0000000 /* Strap Bits */
-#define SDR0_PINSTP_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0
- (EBC boot) */
-#define SDR0_PINSTP_BOOTSTRAP_SETTINGS1 0x40000000 /* Default strap settings 1
- (PCI boot) */
-#define SDR0_PINSTP_BOOTSTRAP_IIC_54_EN 0x80000000 /* Serial Device Enabled -
- Addr = 0x54 */
-#define SDR0_PINSTP_BOOTSTRAP_IIC_50_EN 0xC0000000 /* Serial Device Enabled -
- Addr = 0x50 */
-
-#define SDR0_SRST0_DMC 0x00200000
-
-#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
-#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
-#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
-#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
-#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
-#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
-
-#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
-#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
-#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
-#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
-#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
-#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
-
-#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
-#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */
-#define PRADV_MASK 0x07000000 /* Primary Divisor A */
-#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
-#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
-
-/* Strap 1 Register */
-#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
-#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
-#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
-#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */
-#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
-#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
-#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
-#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
-#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
-#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
-#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
-#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
-#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
-#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
-#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
-#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
-#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-
-#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
-#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
-
-#endif /* _PPC440SPE_H_ */
diff --git a/arch/powerpc/include/asm/ppc460ex_gt.h b/arch/powerpc/include/asm/ppc460ex_gt.h
deleted file mode 100644
index ea019aa..0000000
--- a/arch/powerpc/include/asm/ppc460ex_gt.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC460EX_GT_H_
-#define _PPC460EX_GT_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
-
-#define CONFIG_NAND_NDFC
-
-/*
- * Some SoC specific registers
- */
-
-/* Memory mapped registers */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
-
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_PERIPHERAL_BASE + 0x0500)
-#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_PERIPHERAL_BASE + 0x0600)
-#endif
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0b00)
-#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0c00)
-
-/* DCR */
-#define AHB_TOP 0x00a4
-#define AHB_BOT 0x00a5
-
-/* SDR */
-#define SDR0_PCI0 0x01c0
-#define SDR0_AHB_CFG 0x0370
-#define SDR0_USB2HOST_CFG 0x0371
-#define SDR0_ETH_PLL 0x4102
-#define SDR0_ETH_CFG 0x4103
-#define SDR0_ETH_STS 0x4104
-
-/*
- * Register bits and masks
- */
-#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
-#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
-
-/* CUST0 Customer Configuration Register0 */
-#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
-#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
-#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
-#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
-
-#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
-#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
-#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
-
-#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
-#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
-#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
-
-#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
-#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((u32)(n)) & 0xF) << 24)
-#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((u32)(n)) >> 24) & 0xF)
-
-#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
-#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((u32)(n)) & 0x3) << 22)
-#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((u32)(n)) >> 22) & 0x3)
-
-#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
-#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
-
-#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
-#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
-#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
-
-#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
-#define SDR0_CUST0_NDRSC_ENCODE(n) ((((u32)(n)) & 0xFFF) << 4)
-#define SDR0_CUST0_NDRSC_DECODE(n) ((((u32)(n)) >> 4) & 0xFFF)
-
-#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
-#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
-#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /*All Chip Select Gating Enable*/
-#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
-#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
-
-/* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */
-#define SDR0_ETH_PLL_PLLLOCK 0x80000000 /* Ethernet PLL lock indication */
-
-/* Ethernet Configuration Register (SDR0_ETH_CFG) */
-#define SDR0_ETH_CFG_SGMII3_LPBK 0x00800000 /*SGMII3 port loopback
- enable */
-#define SDR0_ETH_CFG_SGMII2_LPBK 0x00400000 /*SGMII2 port loopback
- enable */
-#define SDR0_ETH_CFG_SGMII1_LPBK 0x00200000 /*SGMII1 port loopback
- enable */
-#define SDR0_ETH_CFG_SGMII0_LPBK 0x00100000 /*SGMII0 port loopback
- enable */
-#define SDR0_ETH_CFG_SGMII_MASK 0x00070000 /*SGMII Mask */
-#define SDR0_ETH_CFG_SGMII2_ENABLE 0x00040000 /*SGMII2 port enable */
-#define SDR0_ETH_CFG_SGMII1_ENABLE 0x00020000 /*SGMII1 port enable */
-#define SDR0_ETH_CFG_SGMII0_ENABLE 0x00010000 /*SGMII0 port enable */
-#define SDR0_ETH_CFG_TAHOE1_BYPASS 0x00002000 /*TAHOE1 Bypass selector */
-#define SDR0_ETH_CFG_TAHOE0_BYPASS 0x00001000 /*TAHOE0 Bypass selector */
-#define SDR0_ETH_CFG_EMAC3_PHY_CLK_SEL 0x00000800 /*EMAC 3 PHY clock selector*/
-#define SDR0_ETH_CFG_EMAC2_PHY_CLK_SEL 0x00000400 /*EMAC 2 PHY clock selector*/
-#define SDR0_ETH_CFG_EMAC1_PHY_CLK_SEL 0x00000200 /*EMAC 1 PHY clock selector*/
-#define SDR0_ETH_CFG_EMAC0_PHY_CLK_SEL 0x00000100 /*EMAC 0 PHY clock selector*/
-#define SDR0_ETH_CFG_EMAC_2_1_SWAP 0x00000080 /*Swap EMAC2 with EMAC1 */
-#define SDR0_ETH_CFG_EMAC_0_3_SWAP 0x00000040 /*Swap EMAC0 with EMAC3 */
-#define SDR0_ETH_CFG_MDIO_SEL_MASK 0x00000030 /*MDIO source selector mask*/
-#define SDR0_ETH_CFG_MDIO_SEL_EMAC0 0x00000000 /*MDIO source - EMAC0 */
-#define SDR0_ETH_CFG_MDIO_SEL_EMAC1 0x00000010 /*MDIO source - EMAC1 */
-#define SDR0_ETH_CFG_MDIO_SEL_EMAC2 0x00000020 /*MDIO source - EMAC2 */
-#define SDR0_ETH_CFG_MDIO_SEL_EMAC3 0x00000030 /*MDIO source - EMAC3 */
-#define SDR0_ETH_CFG_GMC1_BRIDGE_SEL 0x00000002 /*GMC Port 1 bridge
- selector */
-#define SDR0_ETH_CFG_GMC0_BRIDGE_SEL 0x00000001 /*GMC Port 0 bridge
- selector */
-
-#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
-#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
-#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
-#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
-#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/
- transmitter 0 */
-#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/
- transmitter 1 */
-#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
-#define SDR0_SRST0_IIC1 0x01000000 /* Inter integrated circuit 1 */
-#define SDR0_SRST0_GPIO0 0x00800000 /* General purpose I/O 0 */
-#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
-#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
-#define SDR0_SRST0_PCI 0x00100000 /* PCI */
-#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
-#define SDR0_SRST0_IMU 0x00010000 /* I2O DMA */
-#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0*/
-#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1*/
-#define SDR0_SRST0_SRAM 0x00002000 /* Universal interrupt controller 0*/
-#define SDR0_SRST0_UIC2 0x00001000 /* Universal interrupt controller 2*/
-#define SDR0_SRST0_UIC3 0x00000800 /* Universal interrupt controller 3*/
-#define SDR0_SRST0_OCM 0x00000400 /* Universal interrupt controller 0*/
-#define SDR0_SRST0_UART2 0x00000200 /* Universal asynchronous receiver/
- transmitter 2 */
-#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
-#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
-#define SDR0_SRST0_L2CACHE 0x00000004 /* L2 Cache */
-#define SDR0_SRST0_UART3 0x00000002 /* Universal asynchronous receiver/
- transmitter 3 */
-#define SDR0_SRST0_GPIO1 0x00000001 /* General purpose I/O 1 */
-
-#define SDR0_SRST1_RLL 0x80000000 /* SRIO RLL */
-#define SDR0_SRST1_SCP 0x40000000 /* Serial communications port */
-#define SDR0_SRST1_PLBARB 0x20000000 /* PLB Arbiter */
-#define SDR0_SRST1_EIPPKP 0x10000000 /* EIPPPKP */
-#define SDR0_SRST1_EIP94 0x08000000 /* EIP 94 */
-#define SDR0_SRST1_EMAC0 0x04000000 /* Ethernet media access
- controller 0 */
-#define SDR0_SRST1_EMAC1 0x02000000 /* Ethernet media access
- controller 1 */
-#define SDR0_SRST1_EMAC2 0x01000000 /* Ethernet media access
- controller 2 */
-#define SDR0_SRST1_EMAC3 0x00800000 /* Ethernet media access
- controller 3 */
-#define SDR0_SRST1_ZMII 0x00400000 /* Ethernet ZMII/RMII/SMII */
-#define SDR0_SRST1_RGMII0 0x00200000 /* Ethernet RGMII/RTBI 0 */
-#define SDR0_SRST1_RGMII1 0x00100000 /* Ethernet RGMII/RTBI 1 */
-#define SDR0_SRST1_DMA4 0x00080000 /* DMA to PLB4 */
-#define SDR0_SRST1_DMA4CH 0x00040000 /* DMA Channel to PLB4 */
-#define SDR0_SRST1_SATAPHY 0x00020000 /* Serial ATA PHY */
-#define SDR0_SRST1_SRIODEV 0x00010000 /* Serial Rapid IO core, PCS, and
- serdes */
-#define SDR0_SRST1_SRIOPCS 0x00008000 /* Serial Rapid IO core and PCS */
-#define SDR0_SRST1_NDFC 0x00004000 /* Nand flash controller */
-#define SDR0_SRST1_SRIOPLB 0x00002000 /* Serial Rapid IO PLB */
-#define SDR0_SRST1_ETHPLL 0x00001000 /* Ethernet PLL */
-#define SDR0_SRST1_TAHOE1 0x00000800 /* Ethernet Tahoe 1 */
-#define SDR0_SRST1_TAHOE0 0x00000400 /* Ethernet Tahoe 0 */
-#define SDR0_SRST1_SGMII0 0x00000200 /* Ethernet SGMII 0 */
-#define SDR0_SRST1_SGMII1 0x00000100 /* Ethernet SGMII 1 */
-#define SDR0_SRST1_SGMII2 0x00000080 /* Ethernet SGMII 2 */
-#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */
-#define SDR0_SRST1_USBOTGPHY 0x00000020 /* USB 2.0 OTG PHY */
-#define SDR0_SRST1_USBOTG 0x00000010 /* USB 2.0 OTG controller */
-#define SDR0_SRST1_USBHOST 0x00000008 /* USB 2.0 Host controller */
-#define SDR0_SRST1_AHBDMAC 0x00000004 /* AHB DMA controller */
-#define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */
-#define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */
-
-#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
-#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
-#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
-#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */
-#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
-
-#define CPR0_ICFG_RLI_MASK 0x80000000
-
-#define CPR0_PLLC_RST 0x80000000
-#define CPR0_PLLC_ENG 0x40000000
-
-#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
-#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
-
-#endif /* _PPC460EX_GT_H_ */
diff --git a/arch/powerpc/include/asm/ppc460sx.h b/arch/powerpc/include/asm/ppc460sx.h
deleted file mode 100644
index b692d07..0000000
--- a/arch/powerpc/include/asm/ppc460sx.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC460SX_H_
-#define _PPC460SX_H_
-
-#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
-
-/* Memory mapped registers */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* Internal Peripherals */
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
-
-#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
-
-#define SDR0_SRST0_DMC 0x00200000
-
-#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
-#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
-#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
-#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */
-#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
-#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
-
-#endif /* _PPC460SX_H_ */
diff --git a/arch/powerpc/include/asm/ppc4xx-ebc.h b/arch/powerpc/include/asm/ppc4xx-ebc.h
deleted file mode 100644
index 952783f..0000000
--- a/arch/powerpc/include/asm/ppc4xx-ebc.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC4xx_EBC_H_
-#define _PPC4xx_EBC_H_
-
-/*
- * Currently there are two register layout versions for the IBM EBC core
- * used on 4xx PPC's. The following grouping lists the first layout.
- * Within this group there is a slight variation concerning the bit field
- * position of the EMPL and EMPH fields:
- */
-#if defined(CONFIG_405GP) || \
- defined(CONFIG_405EP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define CONFIG_EBC_PPC4xx_IBM_VER1
-#if defined(CONFIG_405GP) || \
- defined(CONFIG_405EP)
-#define EBC_CFG_EMPH_POS 8
-#define EBC_CFG_EMPL_POS 6
-#else
-#define EBC_CFG_EMPH_POS 6
-#define EBC_CFG_EMPL_POS 8
-#endif
-#endif
-
-/*
- * Define the max number of EBC banks (chip selects)
- */
-#if defined(CONFIG_405GP) || \
- defined(CONFIG_405EZ) || \
- defined(CONFIG_440GP) || defined(CONFIG_440GX)
-#define EBC_NUM_BANKS 8
-#endif
-
-#if defined(CONFIG_405EP)
-#define EBC_NUM_BANKS 5
-#endif
-
-#if defined(CONFIG_405EX) || \
- defined(CONFIG_460SX)
-#define EBC_NUM_BANKS 4
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define EBC_NUM_BANKS 6
-#endif
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define EBC_NUM_BANKS 3
-#endif
-
-/* Bank Configuration Register */
-#define EBC_BXCR(n) (n)
-#define EBC_BXCR_BANK_SIZE(n) (0x100000 << (((n) & EBC_BXCR_BS_MASK) >> 17))
-
-#define EBC_BXCR_BAS_MASK PPC_REG_VAL(11, 0xFFF)
-#define EBC_BXCR_BAS_ENCODE(n) (((static_cast(u32, n)) & EBC_BXCR_BAS_MASK))
-#define EBC_BXCR_BS_MASK PPC_REG_VAL(14, 0x7)
-#define EBC_BXCR_BS_1MB PPC_REG_VAL(14, 0x0)
-#define EBC_BXCR_BS_2MB PPC_REG_VAL(14, 0x1)
-#define EBC_BXCR_BS_4MB PPC_REG_VAL(14, 0x2)
-#define EBC_BXCR_BS_8MB PPC_REG_VAL(14, 0x3)
-#define EBC_BXCR_BS_16MB PPC_REG_VAL(14, 0x4)
-#define EBC_BXCR_BS_32MB PPC_REG_VAL(14, 0x5)
-#define EBC_BXCR_BS_64MB PPC_REG_VAL(14, 0x6)
-#define EBC_BXCR_BS_128MB PPC_REG_VAL(14, 0x7)
-#define EBC_BXCR_BU_MASK PPC_REG_VAL(16, 0x3)
-#define EBC_BXCR_BU_NONE PPC_REG_VAL(16, 0x0)
-#define EBC_BXCR_BU_R PPC_REG_VAL(16, 0x1)
-#define EBC_BXCR_BU_W PPC_REG_VAL(16, 0x2)
-#define EBC_BXCR_BU_RW PPC_REG_VAL(16, 0x3)
-#define EBC_BXCR_BW_MASK PPC_REG_VAL(18, 0x3)
-#define EBC_BXCR_BW_8BIT PPC_REG_VAL(18, 0x0)
-#define EBC_BXCR_BW_16BIT PPC_REG_VAL(18, 0x1)
-#if defined(CONFIG_EBC_PPC4xx_IBM_VER1)
-#define EBC_BXCR_BW_32BIT PPC_REG_VAL(18, 0x2)
-#else
-#define EBC_BXCR_BW_32BIT PPC_REG_VAL(18, 0x3)
-#endif
-
-/* Bank Access Parameter Register */
-#define EBC_BXAP_BME_ENABLED PPC_REG_VAL(0, 0x1)
-#define EBC_BXAP_BME_DISABLED PPC_REG_VAL(0, 0x0)
-#define EBC_BXAP_TWT_ENCODE(n) PPC_REG_VAL(8, (static_cast(u32, n)) & 0xFF)
-#define EBC_BXAP_FWT_ENCODE(n) PPC_REG_VAL(5, (static_cast(u32, n)) & 0x1F)
-#define EBC_BXAP_BWT_ENCODE(n) PPC_REG_VAL(8, (static_cast(u32, n)) & 0x7)
-#define EBC_BXAP_BCE_DISABLE PPC_REG_VAL(9, 0x0)
-#define EBC_BXAP_BCE_ENABLE PPC_REG_VAL(9, 0x1)
-#define EBC_BXAP_BCT_MASK PPC_REG_VAL(11, 0x3)
-#define EBC_BXAP_BCT_2TRANS PPC_REG_VAL(11, 0x0)
-#define EBC_BXAP_BCT_4TRANS PPC_REG_VAL(11, 0x1)
-#define EBC_BXAP_BCT_8TRANS PPC_REG_VAL(11, 0x2)
-#define EBC_BXAP_BCT_16TRANS PPC_REG_VAL(11, 0x3)
-#define EBC_BXAP_CSN_ENCODE(n) PPC_REG_VAL(13, (static_cast(u32, n)) & 0x3)
-#define EBC_BXAP_OEN_ENCODE(n) PPC_REG_VAL(15, (static_cast(u32, n)) & 0x3)
-#define EBC_BXAP_WBN_ENCODE(n) PPC_REG_VAL(17, (static_cast(u32, n)) & 0x3)
-#define EBC_BXAP_WBF_ENCODE(n) PPC_REG_VAL(19, (static_cast(u32, n)) & 0x3)
-#define EBC_BXAP_TH_ENCODE(n) PPC_REG_VAL(22, (static_cast(u32, n)) & 0x7)
-#define EBC_BXAP_RE_ENABLED PPC_REG_VAL(23, 0x1)
-#define EBC_BXAP_RE_DISABLED PPC_REG_VAL(23, 0x0)
-#define EBC_BXAP_SOR_DELAYED PPC_REG_VAL(24, 0x0)
-#define EBC_BXAP_SOR_NONDELAYED PPC_REG_VAL(24, 0x1)
-#define EBC_BXAP_BEM_WRITEONLY PPC_REG_VAL(25, 0x0)
-#define EBC_BXAP_BEM_RW PPC_REG_VAL(25, 0x1)
-#define EBC_BXAP_PEN_DISABLED PPC_REG_VAL(26, 0x0)
-#define EBC_BXAP_PEN_ENABLED PPC_REG_VAL(26, 0x1)
-
-/* Common fields in EBC0_CFG register */
-#define EBC_CFG_PTD_MASK PPC_REG_VAL(1, 0x1)
-#define EBC_CFG_PTD_ENABLE PPC_REG_VAL(1, 0x0)
-#define EBC_CFG_PTD_DISABLE PPC_REG_VAL(1, 0x1)
-#define EBC_CFG_RTC_MASK PPC_REG_VAL(4, 0x7)
-#define EBC_CFG_RTC_16PERCLK PPC_REG_VAL(4, 0x0)
-#define EBC_CFG_RTC_32PERCLK PPC_REG_VAL(4, 0x1)
-#define EBC_CFG_RTC_64PERCLK PPC_REG_VAL(4, 0x2)
-#define EBC_CFG_RTC_128PERCLK PPC_REG_VAL(4, 0x3)
-#define EBC_CFG_RTC_256PERCLK PPC_REG_VAL(4, 0x4)
-#define EBC_CFG_RTC_512PERCLK PPC_REG_VAL(4, 0x5)
-#define EBC_CFG_RTC_1024PERCLK PPC_REG_VAL(4, 0x6)
-#define EBC_CFG_RTC_2048PERCLK PPC_REG_VAL(4, 0x7)
-#define EBC_CFG_PME_MASK PPC_REG_VAL(14, 0x1)
-#define EBC_CFG_PME_DISABLE PPC_REG_VAL(14, 0x0)
-#define EBC_CFG_PME_ENABLE PPC_REG_VAL(14, 0x1)
-#define EBC_CFG_PMT_MASK PPC_REG_VAL(19, 0x1F)
-#define EBC_CFG_PMT_ENCODE(n) PPC_REG_VAL(19, (static_cast(u32, n)) & 0x1F)
-
-/* Now the two versions of the other bits */
-#if defined(CONFIG_EBC_PPC4xx_IBM_VER1)
-#define EBC_CFG_EBTC_MASK PPC_REG_VAL(0, 0x1)
-#define EBC_CFG_EBTC_HI PPC_REG_VAL(0, 0x0)
-#define EBC_CFG_EBTC_DRIVEN PPC_REG_VAL(0, 0x1)
-#define EBC_CFG_EMPH_MASK PPC_REG_VAL(EBC_CFG_EMPH_POS, 0x3)
-#define EBC_CFG_EMPH_ENCODE(n) PPC_REG_VAL(EBC_CFG_EMPH_POS, \
- (static_cast(u32, n)) & 0x3)
-#define EBC_CFG_EMPL_MASK PPC_REG_VAL(EBC_CFG_EMPL_POS, 0x3)
-#define EBC_CFG_EMPL_ENCODE(n) PPC_REG_VAL(EBC_CFG_EMPH_POS, \
- (static_cast(u32, n)) & 0x3)
-#define EBC_CFG_CSTC_MASK PPC_REG_VAL(9, 0x1)
-#define EBC_CFG_CSTC_HI PPC_REG_VAL(9, 0x0)
-#define EBC_CFG_CSTC_DRIVEN PPC_REG_VAL(9, 0x1)
-#define EBC_CFG_BPR_MASK PPC_REG_VAL(11, 0x3)
-#define EBC_CFG_BPR_1DW PPC_REG_VAL(11, 0x0)
-#define EBC_CFG_BPR_2DW PPC_REG_VAL(11, 0x1)
-#define EBC_CFG_BPR_4DW PPC_REG_VAL(11, 0x2)
-#define EBC_CFG_EMS_MASK PPC_REG_VAL(13, 0x3)
-#define EBC_CFG_EMS_8BIT PPC_REG_VAL(13, 0x0)
-#define EBC_CFG_EMS_16BIT PPC_REG_VAL(13, 0x1)
-#define EBC_CFG_EMS_32BIT PPC_REG_VAL(13, 0x2)
-#else
-#define EBC_CFG_LE_MASK PPC_REG_VAL(0, 0x1)
-#define EBC_CFG_LE_UNLOCK PPC_REG_VAL(0, 0x0)
-#define EBC_CFG_LE_LOCK PPC_REG_VAL(0, 0x1)
-#define EBC_CFG_ATC_MASK PPC_REG_VAL(5, 0x1)
-#define EBC_CFG_ATC_HI PPC_REG_VAL(5, 0x0)
-#define EBC_CFG_ATC_PREVIOUS PPC_REG_VAL(5, 0x1)
-#define EBC_CFG_DTC_MASK PPC_REG_VAL(6, 0x1)
-#define EBC_CFG_DTC_HI PPC_REG_VAL(6, 0x0)
-#define EBC_CFG_DTC_PREVIOUS PPC_REG_VAL(6, 0x1)
-#define EBC_CFG_CTC_MASK PPC_REG_VAL(7, 0x1)
-#define EBC_CFG_CTC_HI PPC_REG_VAL(7, 0x0)
-#define EBC_CFG_CTC_PREVIOUS PPC_REG_VAL(7, 0x1)
-#define EBC_CFG_OEO_MASK PPC_REG_VAL(8, 0x1)
-#define EBC_CFG_OEO_HI PPC_REG_VAL(8, 0x0)
-#define EBC_CFG_OEO_PREVIOUS PPC_REG_VAL(8, 0x1)
-#define EBC_CFG_EMC_MASK PPC_REG_VAL(9, 0x1)
-#define EBC_CFG_EMC_NONDEFAULT PPC_REG_VAL(9, 0x0)
-#define EBC_CFG_EMC_DEFAULT PPC_REG_VAL(9, 0x1)
-#define EBC_CFG_PR_MASK PPC_REG_VAL(21, 0x3)
-#define EBC_CFG_PR_16 PPC_REG_VAL(21, 0x0)
-#define EBC_CFG_PR_32 PPC_REG_VAL(21, 0x1)
-#define EBC_CFG_PR_64 PPC_REG_VAL(21, 0x2)
-#define EBC_CFG_PR_128 PPC_REG_VAL(21, 0x3)
-#endif
-
-#endif /* _PPC4xx_EBC_H_ */
diff --git a/arch/powerpc/include/asm/ppc4xx-emac.h b/arch/powerpc/include/asm/ppc4xx-emac.h
deleted file mode 100644
index 76fa95c..0000000
--- a/arch/powerpc/include/asm/ppc4xx-emac.h
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0 IBM-pibs
- */
-/*----------------------------------------------------------------------------+
-|
-| File Name: enetemac.h
-|
-| Function: Header file for the EMAC3 macro on the 405GP.
-|
-| Author: Mark Wisner
-|
-| Change Activity-
-|
-| Date Description of Change BY
-| --------- --------------------- ---
-| 29-Apr-99 Created MKW
-|
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| 19-Nov-03 Travis Sawyer, Sandburst Corporation, tsawyer@sandburst.com
-| ported to handle 440GP and 440GX multiple EMACs
-+----------------------------------------------------------------------------*/
-
-#ifndef _PPC4XX_ENET_H_
-#define _PPC4XX_ENET_H_
-
-#include <net.h>
-#include "asm/ppc4xx-mal.h"
-
-
-/*-----------------------------------------------------------------------------+
-| General enternet defines. 802 frames are not supported.
-+-----------------------------------------------------------------------------*/
-#define ENET_ADDR_LENGTH 6
-#define ENET_ARPTYPE 0x806
-#define ARP_REQUEST 1
-#define ARP_REPLY 2
-#define ENET_IPTYPE 0x800
-#define ARP_CACHE_SIZE 5
-
-#define NUM_TX_BUFF 1
-#define NUM_RX_BUFF PKTBUFSRX
-
-struct enet_frame {
- unsigned char dest_addr[ENET_ADDR_LENGTH];
- unsigned char source_addr[ENET_ADDR_LENGTH];
- unsigned short type;
- unsigned char enet_data[1];
-};
-
-struct arp_entry {
- unsigned long inet_address;
- unsigned char mac_address[ENET_ADDR_LENGTH];
- unsigned long valid;
- unsigned long sec;
- unsigned long nsec;
-};
-
-
-/* Statistic Areas */
-#define MAX_ERR_LOG 10
-
-typedef struct emac_stats_st{ /* Statistic Block */
- int data_len_err;
- int rx_frames;
- int rx;
- int rx_prot_err;
- int int_err;
- int pkts_tx;
- int pkts_rx;
- int pkts_handled;
- short tx_err_log[MAX_ERR_LOG];
- short rx_err_log[MAX_ERR_LOG];
-} EMAC_STATS_ST, *EMAC_STATS_PST;
-
-/* Structure containing variables used by the shared code (4xx_enet.c) */
-typedef struct emac_4xx_hw_st {
- uint32_t hw_addr; /* EMAC offset */
- uint32_t tah_addr; /* TAH offset */
- uint32_t phy_id;
- uint32_t phy_addr;
- uint32_t original_fc;
- uint32_t txcw;
- uint32_t autoneg_failed;
- uint32_t emac_ier;
- volatile mal_desc_t *tx;
- volatile mal_desc_t *rx;
- u32 tx_phys;
- u32 rx_phys;
- bd_t *bis; /* for eth_init upon mal error */
- mal_desc_t *alloc_tx_buf;
- mal_desc_t *alloc_rx_buf;
- char *txbuf_ptr;
- uint16_t devnum;
- int get_link_status;
- int tbi_compatibility_en;
- int tbi_compatibility_on;
- int fc_send_xon;
- int report_tx_early;
- int first_init;
- int tx_err_index;
- int rx_err_index;
- int rx_slot; /* MAL Receive Slot */
- int rx_i_index; /* Receive Interrupt Queue Index */
- int rx_u_index; /* Receive User Queue Index */
- int tx_slot; /* MAL Transmit Slot */
- int tx_i_index; /* Transmit Interrupt Queue Index */
- int tx_u_index; /* Transmit User Queue Index */
- int rx_ready[NUM_RX_BUFF]; /* Receive Ready Queue */
- int tx_run[NUM_TX_BUFF]; /* Transmit Running Queue */
- int is_receiving; /* sync with eth interrupt */
- int print_speed; /* print speed message upon start */
- EMAC_STATS_ST stats;
-} EMAC_4XX_HW_ST, *EMAC_4XX_HW_PST;
-
-
-#if defined(CONFIG_440GX) || defined(CONFIG_460GT)
-#define EMAC_NUM_DEV 4
-#elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
-#define EMAC_NUM_DEV 2
-#else
-#define EMAC_NUM_DEV 1
-#endif
-
-#ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */
-#define EMAC_STACR_OC_MASK (0x00008000)
-#else
-#define EMAC_STACR_OC_MASK (0x00000000)
-#endif
-
-/*
- * XMII bridge configurations for those systems (e.g. 405EX(r)) that do
- * not have a pin function control (PFC) register to otherwise determine
- * the bridge configuration.
- */
-#define EMAC_PHY_MODE_NONE 0
-#define EMAC_PHY_MODE_NONE_RGMII 1
-#define EMAC_PHY_MODE_RGMII_NONE 2
-#define EMAC_PHY_MODE_RGMII_RGMII 3
-#define EMAC_PHY_MODE_NONE_GMII 4
-#define EMAC_PHY_MODE_GMII_NONE 5
-#define EMAC_PHY_MODE_NONE_MII 6
-#define EMAC_PHY_MODE_MII_NONE 7
-
-/* ZMII Bridge Register addresses */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define ZMII0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0D00)
-#else
-#define ZMII0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0780)
-#endif
-#define ZMII0_FER (ZMII0_BASE)
-#define ZMII0_SSR (ZMII0_BASE + 4)
-#define ZMII0_SMIISR (ZMII0_BASE + 8)
-
-/* ZMII FER Register Bit Definitions */
-#define ZMII_FER_DIS (0x0)
-#define ZMII_FER_MDI (0x8)
-#define ZMII_FER_SMII (0x4)
-#define ZMII_FER_RMII (0x2)
-#define ZMII_FER_MII (0x1)
-
-#define ZMII_FER_RSVD11 (0x00200000)
-#define ZMII_FER_RSVD10 (0x00100000)
-#define ZMII_FER_RSVD14_31 (0x0003FFFF)
-
-#define ZMII_FER_V(__x) (((3 - __x) * 4) + 16)
-
-
-/* ZMII Speed Selection Register Bit Definitions */
-#define ZMII0_SSR_SCI (0x4)
-#define ZMII0_SSR_FSS (0x2)
-#define ZMII0_SSR_SP (0x1)
-#define ZMII0_SSR_RSVD16_31 (0x0000FFFF)
-
-#define ZMII0_SSR_V(__x) (((3 - __x) * 4) + 16)
-
-
-/* ZMII SMII Status Register Bit Definitions */
-#define ZMII0_SMIISR_E1 (0x80)
-#define ZMII0_SMIISR_EC (0x40)
-#define ZMII0_SMIISR_EN (0x20)
-#define ZMII0_SMIISR_EJ (0x10)
-#define ZMII0_SMIISR_EL (0x08)
-#define ZMII0_SMIISR_ED (0x04)
-#define ZMII0_SMIISR_ES (0x02)
-#define ZMII0_SMIISR_EF (0x01)
-
-#define ZMII0_SMIISR_V(__x) ((3 - __x) * 8)
-
-/* RGMII Register Addresses */
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define RGMII_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x1000)
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define RGMII_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x1500)
-#elif defined(CONFIG_405EX)
-#define RGMII_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0xB00)
-#else
-#define RGMII_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0790)
-#endif
-#define RGMII_FER (RGMII_BASE + 0x00)
-#define RGMII_SSR (RGMII_BASE + 0x04)
-
-#if defined(CONFIG_460GT)
-#define RGMII1_BASE_OFFSET 0x100
-#endif
-
-/* RGMII Function Enable (FER) Register Bit Definitions */
-#define RGMII_FER_DIS (0x00)
-#define RGMII_FER_RTBI (0x04)
-#define RGMII_FER_RGMII (0x05)
-#define RGMII_FER_TBI (0x06)
-#define RGMII_FER_GMII (0x07)
-#define RGMII_FER_MII (RGMII_FER_GMII)
-
-#define RGMII_FER_V(__x) ((__x - 2) * 4)
-
-#define RGMII_FER_MDIO(__x) (1 << (19 - (__x)))
-
-/* RGMII Speed Selection Register Bit Definitions */
-#define RGMII_SSR_SP_10MBPS (0x00)
-#define RGMII_SSR_SP_100MBPS (0x02)
-#define RGMII_SSR_SP_1000MBPS (0x04)
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_405EX)
-#define RGMII_SSR_V(__x) ((__x) * 8)
-#else
-#define RGMII_SSR_V(__x) ((__x -2) * 8)
-#endif
-
-/*---------------------------------------------------------------------------+
-| TCP/IP Acceleration Hardware (TAH) 440GX Only
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX)
-#define TAH_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0B50)
-#define TAH_REVID (TAH_BASE + 0x0) /* Revision ID (RO)*/
-#define TAH_MR (TAH_BASE + 0x10) /* Mode Register (R/W) */
-#define TAH_SSR0 (TAH_BASE + 0x14) /* Segment Size Reg 0 (R/W) */
-#define TAH_SSR1 (TAH_BASE + 0x18) /* Segment Size Reg 1 (R/W) */
-#define TAH_SSR2 (TAH_BASE + 0x1C) /* Segment Size Reg 2 (R/W) */
-#define TAH_SSR3 (TAH_BASE + 0x20) /* Segment Size Reg 3 (R/W) */
-#define TAH_SSR4 (TAH_BASE + 0x24) /* Segment Size Reg 4 (R/W) */
-#define TAH_SSR5 (TAH_BASE + 0x28) /* Segment Size Reg 5 (R/W) */
-#define TAH_TSR (TAH_BASE + 0x2C) /* Transmit Status Register (RO) */
-
-/* TAH Revision */
-#define TAH_REV_RN_M (0x000FFF00) /* Revision Number */
-#define TAH_REV_BN_M (0x000000FF) /* Branch Revision Number */
-
-#define TAH_REV_RN_V (8)
-#define TAH_REV_BN_V (0)
-
-/* TAH Mode Register */
-#define TAH_MR_CVR (0x80000000) /* Checksum verification on RX */
-#define TAH_MR_SR (0x40000000) /* Software reset */
-#define TAH_MR_ST (0x3F000000) /* Send Threshold */
-#define TAH_MR_TFS (0x00E00000) /* Transmit FIFO size */
-#define TAH_MR_DTFP (0x00100000) /* Disable TX FIFO parity */
-#define TAH_MR_DIG (0x00080000) /* Disable interrupt generation */
-#define TAH_MR_RSVD (0x0007FFFF) /* Reserved */
-
-#define TAH_MR_ST_V (20)
-#define TAH_MR_TFS_V (17)
-
-#define TAH_MR_TFS_2K (0x1) /* Transmit FIFO size 2Kbyte */
-#define TAH_MR_TFS_4K (0x2) /* Transmit FIFO size 4Kbyte */
-#define TAH_MR_TFS_6K (0x3) /* Transmit FIFO size 6Kbyte */
-#define TAH_MR_TFS_8K (0x4) /* Transmit FIFO size 8Kbyte */
-#define TAH_MR_TFS_10K (0x5) /* Transmit FIFO size 10Kbyte (max)*/
-
-
-/* TAH Segment Size Registers 0:5 */
-#define TAH_SSR_RSVD0 (0xC0000000) /* Reserved */
-#define TAH_SSR_SS (0x3FFE0000) /* Segment size in multiples of 2 */
-#define TAH_SSR_RSVD1 (0x0001FFFF) /* Reserved */
-
-/* TAH Transmit Status Register */
-#define TAH_TSR_TFTS (0x80000000) /* Transmit FIFO too small */
-#define TAH_TSR_UH (0x40000000) /* Unrecognized header */
-#define TAH_TSR_NIPF (0x20000000) /* Not IPv4 */
-#define TAH_TSR_IPOP (0x10000000) /* IP option present */
-#define TAH_TSR_NISF (0x08000000) /* No IEEE SNAP format */
-#define TAH_TSR_ILTS (0x04000000) /* IP length too short */
-#define TAH_TSR_IPFP (0x02000000) /* IP fragment present */
-#define TAH_TSR_UP (0x01000000) /* Unsupported protocol */
-#define TAH_TSR_TFP (0x00800000) /* TCP flags present */
-#define TAH_TSR_SUDP (0x00400000) /* Segmentation for UDP */
-#define TAH_TSR_DLM (0x00200000) /* Data length mismatch */
-#define TAH_TSR_SIEEE (0x00100000) /* Segmentation for IEEE */
-#define TAH_TSR_TFPE (0x00080000) /* Transmit FIFO parity error */
-#define TAH_TSR_SSTS (0x00040000) /* Segment size too small */
-#define TAH_TSR_RSVD (0x0003FFFF) /* Reserved */
-#endif /* CONFIG_440GX */
-
-
-/* Ethernet MAC Regsiter Addresses */
-#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define EMAC0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0E00)
-#else
-#define EMAC0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0800)
-#endif
-#else
-#if defined(CONFIG_405EZ) || defined(CONFIG_405EX)
-#define EMAC0_BASE 0xEF600900
-#else
-#define EMAC0_BASE 0xEF600800
-#endif
-#endif
-
-#if defined(CONFIG_440EPX)
-#define EMAC1_BASE 0xEF600F00
-#define EMAC1_MR1 (EMAC1_BASE + 0x04)
-#endif
-
-#define EMAC0_MR0 (EMAC0_BASE)
-#define EMAC0_MR1 (EMAC0_BASE + 0x04)
-#define EMAC0_TMR0 (EMAC0_BASE + 0x08)
-#define EMAC0_TMR1 (EMAC0_BASE + 0x0c)
-#define EMAC0_RXM (EMAC0_BASE + 0x10)
-#define EMAC0_ISR (EMAC0_BASE + 0x14)
-#define EMAC0_IER (EMAC0_BASE + 0x18)
-#define EMAC0_IAH (EMAC0_BASE + 0x1c)
-#define EMAC0_IAL (EMAC0_BASE + 0x20)
-#define EMAC0_PTR (EMAC0_BASE + 0x2c)
-#define EMAC0_PAUSE_TIME_REG EMAC0_PTR
-#define EMAC0_IPGVR (EMAC0_BASE + 0x58)
-#define EMAC0_I_FRAME_GAP_REG EMAC0_IPGVR
-#define EMAC0_STACR (EMAC0_BASE + 0x5c)
-#define EMAC0_TRTR (EMAC0_BASE + 0x60)
-#define EMAC0_RWMR (EMAC0_BASE + 0x64)
-#define EMAC0_RX_HI_LO_WMARK EMAC0_RWMR
-
-/* bit definitions */
-/* MODE REG 0 */
-#define EMAC_MR0_RXI (0x80000000)
-#define EMAC_MR0_TXI (0x40000000)
-#define EMAC_MR0_SRST (0x20000000)
-#define EMAC_MR0_TXE (0x10000000)
-#define EMAC_MR0_RXE (0x08000000)
-#define EMAC_MR0_WKE (0x04000000)
-
-/* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_405EX)
-/* MODE Reg 1 */
-#define EMAC_MR1_FDE (0x80000000)
-#define EMAC_MR1_ILE (0x40000000)
-#define EMAC_MR1_VLE (0x20000000)
-#define EMAC_MR1_EIFC (0x10000000)
-#define EMAC_MR1_APP (0x08000000)
-#define EMAC_MR1_RSVD (0x06000000)
-#define EMAC_MR1_IST (0x01000000)
-#define EMAC_MR1_MF_1000GPCS (0x00C00000)
-#define EMAC_MR1_MF_1000MBPS (0x00800000) /* 0's for 10MBPS */
-#define EMAC_MR1_MF_100MBPS (0x00400000)
-#define EMAC_MR1_RFS_MASK (0x00380000)
-#define EMAC_MR1_RFS_16K (0x00280000)
-#define EMAC_MR1_RFS_8K (0x00200000)
-#define EMAC_MR1_RFS_4K (0x00180000)
-#define EMAC_MR1_RFS_2K (0x00100000)
-#define EMAC_MR1_RFS_1K (0x00080000)
-#define EMAC_MR1_TX_FIFO_MASK (0x00070000)
-#define EMAC_MR1_TX_FIFO_16K (0x00050000)
-#define EMAC_MR1_TX_FIFO_8K (0x00040000)
-#define EMAC_MR1_TX_FIFO_4K (0x00030000)
-#define EMAC_MR1_TX_FIFO_2K (0x00020000)
-#define EMAC_MR1_TX_FIFO_1K (0x00010000)
-#define EMAC_MR1_TR_MULTI (0x00008000) /* 0'x for single packet */
-#define EMAC_MR1_MWSW (0x00007000)
-#define EMAC_MR1_JUMBO_ENABLE (0x00000800)
-#define EMAC_MR1_IPPA (0x000007c0)
-#define EMAC_MR1_IPPA_SET(id) (((id) & 0x1f) << 6)
-#define EMAC_MR1_IPPA_GET(id) (((id) >> 6) & 0x1f)
-#define EMAC_MR1_OBCI_GT100 (0x00000020)
-#define EMAC_MR1_OBCI_100 (0x00000018)
-#define EMAC_MR1_OBCI_83 (0x00000010)
-#define EMAC_MR1_OBCI_66 (0x00000008)
-#define EMAC_MR1_RSVD1 (0x00000007)
-#else /* defined(CONFIG_440GX) */
-/* EMAC_MR1 is the same on 405GP, 405GPr, 405EP, 440GP, 440EP */
-#define EMAC_MR1_FDE 0x80000000
-#define EMAC_MR1_ILE 0x40000000
-#define EMAC_MR1_VLE 0x20000000
-#define EMAC_MR1_EIFC 0x10000000
-#define EMAC_MR1_APP 0x08000000
-#define EMAC_MR1_AEMI 0x02000000
-#define EMAC_MR1_IST 0x01000000
-#define EMAC_MR1_MF_1000MBPS 0x00800000 /* 0's for 10MBPS */
-#define EMAC_MR1_MF_100MBPS 0x00400000
-#define EMAC_MR1_RFS_MASK 0x00300000
-#define EMAC_MR1_RFS_4K 0x00300000
-#define EMAC_MR1_RFS_2K 0x00200000
-#define EMAC_MR1_RFS_1K 0x00100000
-#define EMAC_MR1_RFS_512 0x00000000
-#define EMAC_MR1_TX_FIFO_MASK 0x000c0000
-#define EMAC_MR1_TX_FIFO_2K 0x00080000
-#define EMAC_MR1_TX_FIFO_1K 0x00040000
-#define EMAC_MR1_TX_FIFO_512 0x00000000
-#define EMAC_MR1_TR0_DEPEND 0x00010000 /* 0'x for single packet */
-#define EMAC_MR1_TR0_MULTI 0x00008000
-#define EMAC_MR1_TR1_DEPEND 0x00004000
-#define EMAC_MR1_TR1_MULTI 0x00002000
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define EMAC_MR1_JUMBO_ENABLE 0x00001000
-#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
-#endif /* defined(CONFIG_440GX) */
-
-#define EMAC_MR1_FIFO_MASK (EMAC_MR1_RFS_MASK | EMAC_MR1_TX_FIFO_MASK)
-#if defined(CONFIG_405EZ)
-/* 405EZ only supports 512 bytes fifos */
-#define EMAC_MR1_FIFO_SIZE (EMAC_MR1_RFS_512 | EMAC_MR1_TX_FIFO_512)
-#else
-/* Set receive fifo to 4k and tx fifo to 2k */
-#define EMAC_MR1_FIFO_SIZE (EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K)
-#endif
-
-/* Transmit Mode Register 0 */
-#define EMAC_TMR0_GNP0 (0x80000000)
-#define EMAC_TMR0_GNP1 (0x40000000)
-#define EMAC_TMR0_GNPD (0x20000000)
-#define EMAC_TMR0_FC (0x10000000)
-
-/* Receive Mode Register */
-#define EMAC_RMR_SP (0x80000000)
-#define EMAC_RMR_SFCS (0x40000000)
-#define EMAC_RMR_ARRP (0x20000000)
-#define EMAC_RMR_ARP (0x10000000)
-#define EMAC_RMR_AROP (0x08000000)
-#define EMAC_RMR_ARPI (0x04000000)
-#define EMAC_RMR_PPP (0x02000000)
-#define EMAC_RMR_PME (0x01000000)
-#define EMAC_RMR_PMME (0x00800000)
-#define EMAC_RMR_IAE (0x00400000)
-#define EMAC_RMR_MIAE (0x00200000)
-#define EMAC_RMR_BAE (0x00100000)
-#define EMAC_RMR_MAE (0x00080000)
-
-/* Interrupt Status & enable Regs */
-#define EMAC_ISR_OVR (0x02000000)
-#define EMAC_ISR_PP (0x01000000)
-#define EMAC_ISR_BP (0x00800000)
-#define EMAC_ISR_RP (0x00400000)
-#define EMAC_ISR_SE (0x00200000)
-#define EMAC_ISR_SYE (0x00100000)
-#define EMAC_ISR_BFCS (0x00080000)
-#define EMAC_ISR_PTLE (0x00040000)
-#define EMAC_ISR_ORE (0x00020000)
-#define EMAC_ISR_IRE (0x00010000)
-#define EMAC_ISR_DBDM (0x00000200)
-#define EMAC_ISR_DB0 (0x00000100)
-#define EMAC_ISR_SE0 (0x00000080)
-#define EMAC_ISR_TE0 (0x00000040)
-#define EMAC_ISR_DB1 (0x00000020)
-#define EMAC_ISR_SE1 (0x00000010)
-#define EMAC_ISR_TE1 (0x00000008)
-#define EMAC_ISR_MOS (0x00000002)
-#define EMAC_ISR_MOF (0x00000001)
-
-/* STA CONTROL REG */
-#define EMAC_STACR_OC (0x00008000)
-#define EMAC_STACR_PHYE (0x00004000)
-
-#ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */
-#define EMAC_STACR_INDIRECT_MODE (0x00002000)
-#define EMAC_STACR_WRITE (0x00000800) /* $BUC */
-#define EMAC_STACR_READ (0x00001000) /* $BUC */
-#define EMAC_STACR_OP_MASK (0x00001800)
-#define EMAC_STACR_MDIO_ADDR (0x00000000)
-#define EMAC_STACR_MDIO_WRITE (0x00000800)
-#define EMAC_STACR_MDIO_READ (0x00001800)
-#define EMAC_STACR_MDIO_READ_INC (0x00001000)
-#else
-#define EMAC_STACR_WRITE (0x00002000)
-#define EMAC_STACR_READ (0x00001000)
-#endif
-
-#define EMAC_STACR_CLK_83MHZ (0x00000800) /* 0's for 50Mhz */
-#define EMAC_STACR_CLK_66MHZ (0x00000400)
-#define EMAC_STACR_CLK_100MHZ (0x00000C00)
-
-/* Transmit Request Threshold Register */
-#define EMAC_TRTR_256 (0x18000000) /* 0's for 64 Bytes */
-#define EMAC_TRTR_192 (0x10000000)
-#define EMAC_TRTR_128 (0x01000000)
-
-/* the follwing defines are for the MadMAL status and control registers. */
-/* For bits 0..5 look at the mal.h file */
-#define EMAC_TX_CTRL_GFCS (0x0200)
-#define EMAC_TX_CTRL_GP (0x0100)
-#define EMAC_TX_CTRL_ISA (0x0080)
-#define EMAC_TX_CTRL_RSA (0x0040)
-#define EMAC_TX_CTRL_IVT (0x0020)
-#define EMAC_TX_CTRL_RVT (0x0010)
-
-#define EMAC_TX_CTRL_DEFAULT (EMAC_TX_CTRL_GFCS |EMAC_TX_CTRL_GP)
-
-#define EMAC_TX_ST_BFCS (0x0200)
-#define EMAC_TX_ST_BPP (0x0100)
-#define EMAC_TX_ST_LCS (0x0080)
-#define EMAC_TX_ST_ED (0x0040)
-#define EMAC_TX_ST_EC (0x0020)
-#define EMAC_TX_ST_LC (0x0010)
-#define EMAC_TX_ST_MC (0x0008)
-#define EMAC_TX_ST_SC (0x0004)
-#define EMAC_TX_ST_UR (0x0002)
-#define EMAC_TX_ST_SQE (0x0001)
-
-#define EMAC_TX_ST_DEFAULT (0x03F3)
-
-
-/* madmal receive status / Control bits */
-
-#define EMAC_RX_ST_OE (0x0200)
-#define EMAC_RX_ST_PP (0x0100)
-#define EMAC_RX_ST_BP (0x0080)
-#define EMAC_RX_ST_RP (0x0040)
-#define EMAC_RX_ST_SE (0x0020)
-#define EMAC_RX_ST_AE (0x0010)
-#define EMAC_RX_ST_BFCS (0x0008)
-#define EMAC_RX_ST_PTL (0x0004)
-#define EMAC_RX_ST_ORE (0x0002)
-#define EMAC_RX_ST_IRE (0x0001)
-/* all the errors we care about */
-#define EMAC_RX_ERRORS (0x03FF)
-
-#endif /* _PPC4XX_ENET_H_ */
diff --git a/arch/powerpc/include/asm/ppc4xx-gpio.h b/arch/powerpc/include/asm/ppc4xx-gpio.h
deleted file mode 100644
index 90a62ea..0000000
--- a/arch/powerpc/include/asm/ppc4xx-gpio.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_PPC_GPIO_H
-#define __ASM_PPC_GPIO_H
-
-#include <asm/types.h>
-
-/* 4xx PPC's have 2 GPIO controllers */
-#if defined(CONFIG_405EZ) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define GPIO_GROUP_MAX 2
-#else
-#define GPIO_GROUP_MAX 1
-#endif
-
-/* GPIO controller */
-struct ppc4xx_gpio {
- u32 or; /* Output Control */
- u32 tcr; /* Tri-State Control */
- u32 osl; /* Output Select 16..31 */
- u32 osh; /* Output Select 0..15 */
- u32 tsl; /* Tri-State Select 16..31 */
- u32 tsh; /* Tri-State Select 0..15 */
- u32 odr; /* Open Drain */
- u32 ir; /* Input */
- u32 rr1; /* Receive Register 1 */
- u32 rr2; /* Receive Register 2 */
- u32 rr3; /* Receive Register 3 */
- u32 reserved;
- u32 is1l; /* Input Select 1 16..31 */
- u32 is1h; /* Input Select 1 0..15 */
- u32 is2l; /* Input Select 2 16..31 */
- u32 is2h; /* Input Select 2 0..15 */
- u32 is3l; /* Input Select 3 16..31 */
- u32 is3h; /* Input Select 3 0..15 */
-};
-
-/* Offsets */
-#define GPIOx_OR 0x00 /* GPIO Output Register */
-#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */
-#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */
-#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */
-#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */
-#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */
-#define GPIOx_ODR 0x18 /* GPIO Open drain Register */
-#define GPIOx_IR 0x1C /* GPIO Input Register */
-#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */
-#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */
-#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */
-#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */
-#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */
-#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */
-#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */
-#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */
-#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */
-
-#define GPIO_OR(x) (x+GPIOx_OR) /* GPIO Output Register */
-#define GPIO_TCR(x) (x+GPIOx_TCR) /* GPIO Three-State Control Register */
-#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Select Register High or Low */
-#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */
-#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */
-#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */
-#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */
-
-#define GPIO0 0
-#define GPIO1 1
-
-#define GPIO_MAX 32
-#define GPIO_ALT1_SEL 0x40000000
-#define GPIO_ALT2_SEL 0x80000000
-#define GPIO_ALT3_SEL 0xc0000000
-#define GPIO_IN_SEL 0x40000000
-#define GPIO_MASK 0xc0000000
-
-#define GPIO_VAL(gpio) (0x80000000 >> (gpio))
-
-#ifndef __ASSEMBLY__
-typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
-typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
-typedef enum gpio_out { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t;
-
-typedef struct {
- unsigned long add; /* gpio core base address */
- gpio_driver_t in_out; /* Driver Setting */
- gpio_select_t alt_nb; /* Selected Alternate */
- gpio_out_t out_val;/* Default Output Value */
-} gpio_param_s;
-#endif
-
-void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
-void gpio_write_bit(int pin, int val);
-int gpio_read_out_bit(int pin);
-int gpio_read_in_bit(int pin);
-void gpio_set_chip_configuration(void);
-
-#endif /* __ASM_PPC_GPIO_H */
diff --git a/arch/powerpc/include/asm/ppc4xx-i2c.h b/arch/powerpc/include/asm/ppc4xx-i2c.h
deleted file mode 100644
index df97f17..0000000
--- a/arch/powerpc/include/asm/ppc4xx-i2c.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * (C) Copyright 2007-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _4xx_i2c_h_
-#define _4xx_i2c_h_
-
-#define IIC_OK 0
-#define IIC_NOK 1
-#define IIC_NOK_LA 2 /* Lost arbitration */
-#define IIC_NOK_ICT 3 /* Incomplete transfer */
-#define IIC_NOK_XFRA 4 /* Transfer aborted */
-#define IIC_NOK_DATA 5 /* No data in buffer */
-#define IIC_NOK_TOUT 6 /* Transfer timeout */
-
-#define IIC_TIMEOUT 1 /* 1 second */
-
-struct ppc4xx_i2c {
- u8 mdbuf;
- u8 res1;
- u8 sdbuf;
- u8 res2;
- u8 lmadr;
- u8 hmadr;
- u8 cntl;
- u8 mdcntl;
- u8 sts;
- u8 extsts;
- u8 lsadr;
- u8 hsadr;
- u8 clkdiv;
- u8 intrmsk;
- u8 xfrcnt;
- u8 xtcntlss;
- u8 directcntl;
- u8 intr;
-};
-
-/* MDCNTL Register Bit definition */
-#define IIC_MDCNTL_HSCL 0x01
-#define IIC_MDCNTL_EUBS 0x02
-#define IIC_MDCNTL_EINT 0x04
-#define IIC_MDCNTL_ESM 0x08
-#define IIC_MDCNTL_FSM 0x10
-#define IIC_MDCNTL_EGC 0x20
-#define IIC_MDCNTL_FMDB 0x40
-#define IIC_MDCNTL_FSDB 0x80
-
-/* CNTL Register Bit definition */
-#define IIC_CNTL_PT 0x01
-#define IIC_CNTL_READ 0x02
-#define IIC_CNTL_CHT 0x04
-#define IIC_CNTL_RPST 0x08
-/* bit 2/3 for Transfer count*/
-#define IIC_CNTL_AMD 0x40
-#define IIC_CNTL_HMT 0x80
-
-/* STS Register Bit definition */
-#define IIC_STS_PT 0x01
-#define IIC_STS_IRQA 0x02
-#define IIC_STS_ERR 0x04
-#define IIC_STS_SCMP 0x08
-#define IIC_STS_MDBF 0x10
-#define IIC_STS_MDBS 0x20
-#define IIC_STS_SLPR 0x40
-#define IIC_STS_SSS 0x80
-
-/* EXTSTS Register Bit definition */
-#define IIC_EXTSTS_XFRA 0x01
-#define IIC_EXTSTS_ICT 0x02
-#define IIC_EXTSTS_LA 0x04
-#define IIC_EXTSTS_BCS_MASK 0x70
-#define IIC_EXTSTS_BCS_FREE 0x40
-
-/* XTCNTLSS Register Bit definition */
-#define IIC_XTCNTLSS_SRST 0x01
-#define IIC_XTCNTLSS_EPI 0x02
-#define IIC_XTCNTLSS_SDBF 0x04
-#define IIC_XTCNTLSS_SBDD 0x08
-#define IIC_XTCNTLSS_SWS 0x10
-#define IIC_XTCNTLSS_SWC 0x20
-#define IIC_XTCNTLSS_SRS 0x40
-#define IIC_XTCNTLSS_SRC 0x80
-
-/* IICx_DIRECTCNTL register */
-#define IIC_DIRCNTL_SDAC 0x08
-#define IIC_DIRCNTL_SCC 0x04
-#define IIC_DIRCNTL_MSDA 0x02
-#define IIC_DIRCNTL_MSC 0x01
-
-#define DIRCTNL_FREE(v) (((v) & 0x0f) == 0x0f)
-#endif
diff --git a/arch/powerpc/include/asm/ppc4xx-isram.h b/arch/powerpc/include/asm/ppc4xx-isram.h
deleted file mode 100644
index 2ae399f..0000000
--- a/arch/powerpc/include/asm/ppc4xx-isram.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC4xx_ISRAM_H_
-#define _PPC4xx_ISRAM_H_
-
-/*
- * Internal SRAM
- */
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define ISRAM0_DCR_BASE 0x380
-#else
-#define ISRAM0_DCR_BASE 0x020
-#endif
-#define ISRAM0_SB0CR (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
-#define ISRAM0_SB1CR (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
-#define ISRAM0_SB2CR (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
-#define ISRAM0_SB3CR (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
-#define ISRAM0_BEAR (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
-#define ISRAM0_BESR0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
-#define ISRAM0_BESR1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
-#define ISRAM0_PMEG (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
-#define ISRAM0_CID (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
-#define ISRAM0_REVID (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
-#define ISRAM0_DPC (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define ISRAM1_DCR_BASE 0x0B0
-#define ISRAM1_SB0CR (ISRAM1_DCR_BASE+0x00) /* SRAM1 bank config 0*/
-#define ISRAM1_BEAR (ISRAM1_DCR_BASE+0x04) /* SRAM1 bus error addr reg */
-#define ISRAM1_BESR0 (ISRAM1_DCR_BASE+0x05) /* SRAM1 bus error status reg 0 */
-#define ISRAM1_BESR1 (ISRAM1_DCR_BASE+0x06) /* SRAM1 bus error status reg 1 */
-#define ISRAM1_PMEG (ISRAM1_DCR_BASE+0x07) /* SRAM1 power management */
-#define ISRAM1_CID (ISRAM1_DCR_BASE+0x08) /* SRAM1 bus core id reg */
-#define ISRAM1_REVID (ISRAM1_DCR_BASE+0x09) /* SRAM1 bus revision id reg */
-#define ISRAM1_DPC (ISRAM1_DCR_BASE+0x0a) /* SRAM1 data parity check reg */
-#endif /* CONFIG_460EX || CONFIG_460GT */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define ISRAM1_SIZE 0x0984 /* OCM size 64k */
-#endif
-
-/*
- * L2 Cache
- */
-#if defined (CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define L2_CACHE_BASE 0x030
-#define L2_CACHE_CFG (L2_CACHE_BASE+0x00) /* L2 Cache Config */
-#define L2_CACHE_CMD (L2_CACHE_BASE+0x01) /* L2 Cache Command */
-#define L2_CACHE_ADDR (L2_CACHE_BASE+0x02) /* L2 Cache Address */
-#define L2_CACHE_DATA (L2_CACHE_BASE+0x03) /* L2 Cache Data */
-#define L2_CACHE_STAT (L2_CACHE_BASE+0x04) /* L2 Cache Status */
-#define L2_CACHE_CVER (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
-#define L2_CACHE_SNP0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
-#define L2_CACHE_SNP1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
-#endif /* CONFIG_440GX */
-
-#endif /* _PPC4xx_ISRAM_H_ */
diff --git a/arch/powerpc/include/asm/ppc4xx-mal.h b/arch/powerpc/include/asm/ppc4xx-mal.h
deleted file mode 100644
index ef8b174..0000000
--- a/arch/powerpc/include/asm/ppc4xx-mal.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/* include/mal.h, openbios_walnut, walnut_bios 8/6/99 08:48:40 */
-/*
- * SPDX-License-Identifier: GPL-2.0 IBM-pibs
- */
-/*----------------------------------------------------------------------------+
-|
-| File Name: mal.h
-|
-| Function: Header file for the MAL (MADMAL) macro on the 405GP.
-|
-| Author: Mark Wisner
-|
-| Change Activity-
-|
-| Date Description of Change BY
-| --------- --------------------- ---
-| 29-Apr-99 Created MKW
-|
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| 17-Nov-03 Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
-| Added register bit definitions to support multiple channels
-+----------------------------------------------------------------------------*/
-#ifndef _mal_h_
-#define _mal_h_
-
-#if !defined(MAL_DCR_BASE)
-#define MAL_DCR_BASE 0x180
-#endif
-#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */
-#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Error Status (Read/Clear) */
-#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */
-#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set) */
-#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset) */
-#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status*/
-#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int */
-#define MAL0_TXBADDR (MAL_DCR_BASE + 0x09) /* TX descriptor base addr*/
-#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */
-#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */
-#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status*/
-#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int */
-#define MAL0_RXBADDR (MAL_DCR_BASE + 0x15) /* RX descriptor base addr */
-#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table pointer */
-#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table pointer */
-#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table pointer */
-#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table pointer */
-#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table pointer */
-#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table pointer */
-#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */
-#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table pointer */
-#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table pointer */
-#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table pointer */
-#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table pointer*/
-#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table pointer*/
-#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */
-#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */
-#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */
-#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */
-#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */
-#endif /* CONFIG_440GX */
-
-/* MADMAL transmit and receive status/control bits */
-/* for COMMAC bits, refer to the COMMAC header file */
-
-#define MAL_TX_CTRL_READY 0x8000
-#define MAL_TX_CTRL_WRAP 0x4000
-#define MAL_TX_CTRL_CM 0x2000
-#define MAL_TX_CTRL_LAST 0x1000
-#define MAL_TX_CTRL_INTR 0x0400
-
-#define MAL_RX_CTRL_EMPTY 0x8000
-#define MAL_RX_CTRL_WRAP 0x4000
-#define MAL_RX_CTRL_CM 0x2000
-#define MAL_RX_CTRL_LAST 0x1000
-#define MAL_RX_CTRL_FIRST 0x0800
-#define MAL_RX_CTRL_INTR 0x0400
-
- /* Configuration Reg */
-#define MAL_CR_MMSR 0x80000000
-#define MAL_CR_PLBP_1 0x00400000 /* lowsest is 00 */
-#define MAL_CR_PLBP_2 0x00800000
-#define MAL_CR_PLBP_3 0x00C00000 /* highest */
-#define MAL_CR_GA 0x00200000
-#define MAL_CR_OA 0x00100000
-#define MAL_CR_PLBLE 0x00080000
-#define MAL_CR_PLBLT_1 0x00040000
-#define MAL_CR_PLBLT_2 0x00020000
-#define MAL_CR_PLBLT_3 0x00010000
-#define MAL_CR_PLBLT_4 0x00008000
-#define MAL_CR_PLBLT_DEFAULT 0x00078000 /* ????? */
-#define MAL_CR_PLBB 0x00004000
-#define MAL_CR_OPBBL 0x00000080
-#define MAL_CR_EOPIE 0x00000004
-#define MAL_CR_LEA 0x00000002
-#define MAL_CR_MSD 0x00000001
-
- /* Error Status Reg */
-#define MAL_ESR_EVB 0x80000000
-#define MAL_ESR_CID 0x40000000
-#define MAL_ESR_DE 0x00100000
-#define MAL_ESR_ONE 0x00080000
-#define MAL_ESR_OTE 0x00040000
-#define MAL_ESR_OSE 0x00020000
-#define MAL_ESR_PEIN 0x00010000
- /* same bit position as the IER */
- /* VV VV */
-#define MAL_ESR_DEI 0x00000010
-#define MAL_ESR_ONEI 0x00000008
-#define MAL_ESR_OTEI 0x00000004
-#define MAL_ESR_OSEI 0x00000002
-#define MAL_ESR_PBEI 0x00000001
- /* ^^ ^^ */
- /* Mal IER */
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_405EX)
-#define MAL_IER_PT 0x00000080
-#define MAL_IER_PRE 0x00000040
-#define MAL_IER_PWE 0x00000020
-#define MAL_IER_DE 0x00000010
-#define MAL_IER_OTE 0x00000004
-#define MAL_IER_OE 0x00000002
-#define MAL_IER_PE 0x00000001
-#else
-#define MAL_IER_DE 0x00000010
-#define MAL_IER_NE 0x00000008
-#define MAL_IER_TE 0x00000004
-#define MAL_IER_OPBE 0x00000002
-#define MAL_IER_PLBE 0x00000001
-#endif
-
-/* MAL Channel Active Set and Reset Registers */
-#define MAL_TXRX_CASR (0x80000000)
-
-#define MAL_TXRX_CASR_V(__x) (__x) /* Channel 0 shifts 0, channel 1 shifts 1, etc */
-
-
-/* MAL Buffer Descriptor structure */
-typedef struct {
- short ctrl; /* MAL / Commac status control bits */
- short data_len; /* Max length is 4K-1 (12 bits) */
- char *data_ptr; /* pointer to actual data buffer */
-} mal_desc_t;
-
-#endif
diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h
deleted file mode 100644
index e6fed83..0000000
--- a/arch/powerpc/include/asm/ppc4xx-sdram.h
+++ /dev/null
@@ -1,1402 +0,0 @@
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC4xx_SDRAM_H_
-#define _PPC4xx_SDRAM_H_
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_SDRAM)
-
-/*
- * SDRAM Controller
- */
-
-#ifndef CONFIG_405EP
-#define SDRAM0_BESR0 0x00 /* bus error syndrome reg a */
-#define SDRAM0_BESRS0 0x04 /* bus error syndrome reg set a */
-#define SDRAM0_BESR1 0x08 /* bus error syndrome reg b */
-#define SDRAM0_BESRS1 0x0c /* bus error syndrome reg set b */
-#define SDRAM0_BEAR 0x10 /* bus error address reg */
-#endif
-#define SDRAM0_CFG 0x20 /* memory controller options 1 */
-#define SDRAM0_STATUS 0x24 /* memory status */
-#define SDRAM0_RTR 0x30 /* refresh timer reg */
-#define SDRAM0_PMIT 0x34 /* power management idle timer */
-#define SDRAM0_B0CR 0x40 /* memory bank 0 configuration */
-#define SDRAM0_B1CR 0x44 /* memory bank 1 configuration */
-#ifndef CONFIG_405EP
-#define SDRAM0_B2CR 0x48 /* memory bank 2 configuration */
-#define SDRAM0_B3CR 0x4c /* memory bank 3 configuration */
-#endif
-#define SDRAM0_TR 0x80 /* timing reg 1 */
-#ifndef CONFIG_405EP
-#define SDRAM0_ECCCFG 0x94 /* ECC configuration */
-#define SDRAM0_ECCESR 0x98 /* ECC error status */
-#endif
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_SDRAM */
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
-
-/*
- * Memory controller registers
- */
-#define SDRAM_CFG0 0x20 /* memory controller options 0 */
-#define SDRAM_CFG1 0x21 /* memory controller options 1 */
-
-#define SDRAM0_BESR0 0x0000 /* bus error status reg 0 */
-#define SDRAM0_BESR1 0x0008 /* bus error status reg 1 */
-#define SDRAM0_BEAR 0x0010 /* bus error address reg */
-#define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */
-#define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */
-#define SDRAM0_CFG1 0x0021 /* ddr sdram options 1 */
-#define SDRAM0_DEVOPT 0x0022 /* ddr sdram device options */
-#define SDRAM0_MCSTS 0x0024 /* memory controller status */
-#define SDRAM0_RTR 0x0030 /* refresh timer register */
-#define SDRAM0_PMIT 0x0034 /* power management idle timer */
-#define SDRAM0_UABBA 0x0038 /* plb UABus base address */
-#define SDRAM0_B0CR 0x0040 /* ddr sdram bank 0 configuration */
-#define SDRAM0_B1CR 0x0044 /* ddr sdram bank 1 configuration */
-#define SDRAM0_B2CR 0x0048 /* ddr sdram bank 2 configuration */
-#define SDRAM0_B3CR 0x004c /* ddr sdram bank 3 configuration */
-#define SDRAM0_TR0 0x0080 /* sdram timing register 0 */
-#define SDRAM0_TR1 0x0081 /* sdram timing register 1 */
-#define SDRAM0_CLKTR 0x0082 /* ddr clock timing register */
-#define SDRAM0_WDDCTR 0x0083 /* write data/dm/dqs clock timing reg */
-#define SDRAM0_DLYCAL 0x0084 /* delay line calibration register */
-#define SDRAM0_ECCESR 0x0098 /* ECC error status */
-
-/*
- * Memory Controller Options 0
- */
-#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
-#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
-#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */
-#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */
-#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */
-#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */
-#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */
-#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */
-#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */
-#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
-
-/*
- * Memory Controller Options 1
- */
-#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
-#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
-
-/*
- * SDRAM DEVPOT Options
- */
-#define SDRAM_DEVOPT_DLL 0x80000000
-#define SDRAM_DEVOPT_DS 0x40000000
-
-/*
- * SDRAM MCSTS Options
- */
-#define SDRAM_MCSTS_MRSC 0x80000000
-#define SDRAM_MCSTS_SRMS 0x40000000
-#define SDRAM_MCSTS_CIS 0x20000000
-#define SDRAM_MCSTS_IDLE_NOT 0x00000000 /* Mem contr not idle */
-
-/*
- * SDRAM Refresh Timer Register
- */
-#define SDRAM_RTR_RINT_MASK 0xFFFF0000
-#define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK)
-
-/*
- * SDRAM UABus Base Address Reg
- */
-#define SDRAM_UABBA_UBBA_MASK 0x0000000F
-
-/*
- * Memory Bank 0-7 configuration
- */
-#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
-#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
-#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
-#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */
-#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */
-#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */
-#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */
-#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */
-#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */
-#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */
-#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */
-#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */
-#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */
-#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */
-#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
-
-/*
- * SDRAM TR0 Options
- */
-#define SDRAM_TR0_SDWR_MASK 0x80000000
-#define SDRAM_TR0_SDWR_2_CLK 0x00000000
-#define SDRAM_TR0_SDWR_3_CLK 0x80000000
-#define SDRAM_TR0_SDWD_MASK 0x40000000
-#define SDRAM_TR0_SDWD_0_CLK 0x00000000
-#define SDRAM_TR0_SDWD_1_CLK 0x40000000
-#define SDRAM_TR0_SDCL_MASK 0x01800000
-#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000
-#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000
-#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000
-#define SDRAM_TR0_SDPA_MASK 0x000C0000
-#define SDRAM_TR0_SDPA_2_CLK 0x00040000
-#define SDRAM_TR0_SDPA_3_CLK 0x00080000
-#define SDRAM_TR0_SDPA_4_CLK 0x000C0000
-#define SDRAM_TR0_SDCP_MASK 0x00030000
-#define SDRAM_TR0_SDCP_2_CLK 0x00000000
-#define SDRAM_TR0_SDCP_3_CLK 0x00010000
-#define SDRAM_TR0_SDCP_4_CLK 0x00020000
-#define SDRAM_TR0_SDCP_5_CLK 0x00030000
-#define SDRAM_TR0_SDLD_MASK 0x0000C000
-#define SDRAM_TR0_SDLD_1_CLK 0x00000000
-#define SDRAM_TR0_SDLD_2_CLK 0x00004000
-#define SDRAM_TR0_SDRA_MASK 0x0000001C
-#define SDRAM_TR0_SDRA_6_CLK 0x00000000
-#define SDRAM_TR0_SDRA_7_CLK 0x00000004
-#define SDRAM_TR0_SDRA_8_CLK 0x00000008
-#define SDRAM_TR0_SDRA_9_CLK 0x0000000C
-#define SDRAM_TR0_SDRA_10_CLK 0x00000010
-#define SDRAM_TR0_SDRA_11_CLK 0x00000014
-#define SDRAM_TR0_SDRA_12_CLK 0x00000018
-#define SDRAM_TR0_SDRA_13_CLK 0x0000001C
-#define SDRAM_TR0_SDRD_MASK 0x00000003
-#define SDRAM_TR0_SDRD_2_CLK 0x00000001
-#define SDRAM_TR0_SDRD_3_CLK 0x00000002
-#define SDRAM_TR0_SDRD_4_CLK 0x00000003
-
-/*
- * SDRAM TR1 Options
- */
-#define SDRAM_TR1_RDSS_MASK 0xC0000000
-#define SDRAM_TR1_RDSS_TR0 0x00000000
-#define SDRAM_TR1_RDSS_TR1 0x40000000
-#define SDRAM_TR1_RDSS_TR2 0x80000000
-#define SDRAM_TR1_RDSS_TR3 0xC0000000
-#define SDRAM_TR1_RDSL_MASK 0x00C00000
-#define SDRAM_TR1_RDSL_STAGE1 0x00000000
-#define SDRAM_TR1_RDSL_STAGE2 0x00400000
-#define SDRAM_TR1_RDSL_STAGE3 0x00800000
-#define SDRAM_TR1_RDCD_MASK 0x00000800
-#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000
-#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800
-#define SDRAM_TR1_RDCT_MASK 0x000001FF
-#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK)
-#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
-#define SDRAM_TR1_RDCT_MIN 0x00000000
-#define SDRAM_TR1_RDCT_MAX 0x000001FF
-
-/*
- * SDRAM WDDCTR Options
- */
-#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
-#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
-#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
-#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000
-#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
-
-/*
- * SDRAM CLKTR Options
- */
-#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
-#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
-#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
-#define SDRAM_CLKTR_CLKP_180DEG 0x80000000
-#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
-
-/*
- * SDRAM DLYCAL Options
- */
-#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
-#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
-#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR */
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-
-#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
-#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
-#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
-
-#if !defined(CONFIG_405EX)
-/*
- * Memory queue defines
- */
-#define SDRAMQ_DCR_BASE 0x040
-
-#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */
-#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */
-#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */
-#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */
-#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */
-#define SDRAM_CONF1HB_AAFR 0x80000000 /* Address Ack on First Request - Bit 0 */
-#define SDRAM_CONF1HB_PRPD 0x00080000 /* PLB Read pipeline Disable - Bit 12 */
-#define SDRAM_CONF1HB_PWPD 0x00040000 /* PLB Write pipeline Disable - Bit 13 */
-#define SDRAM_CONF1HB_PRW 0x00020000 /* PLB Read Wait - Bit 14 */
-#define SDRAM_CONF1HB_RPLM 0x00001000 /* Read Passing Limit 1 - Bits 16..19 */
-#define SDRAM_CONF1HB_RPEN 0x00000800 /* Read Passing Enable - Bit 20 */
-#define SDRAM_CONF1HB_RFTE 0x00000400 /* Read Flow Through Enable - Bit 21 */
-#define SDRAM_CONF1HB_WRCL 0x00000080 /* MCIF Cycle Limit 1 - Bits 22..24 */
-#define SDRAM_CONF1HB_MASK 0x0000F380 /* RPLM & WRCL mask */
-
-#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */
-#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */
-#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */
-#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */
-#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */
-#define SDRAM_CONF1LL_AAFR 0x80000000 /* Address Ack on First Request - Bit 0 */
-#define SDRAM_CONF1LL_PRPD 0x00080000 /* PLB Read pipeline Disable - Bit 12 */
-#define SDRAM_CONF1LL_PWPD 0x00040000 /* PLB Write pipeline Disable - Bit 13 */
-#define SDRAM_CONF1LL_PRW 0x00020000 /* PLB Read Wait - Bit 14 */
-#define SDRAM_CONF1LL_RPLM 0x00001000 /* Read Passing Limit 1 - Bits 16..19 */
-#define SDRAM_CONF1LL_RPEN 0x00000800 /* Read Passing Enable - Bit 20 */
-#define SDRAM_CONF1LL_RFTE 0x00000400 /* Read Flow Through Enable - Bit 21 */
-#define SDRAM_CONF1LL_MASK 0x0000F000 /* RPLM mask */
-
-#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */
-#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */
-#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */
-#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */
-#define SDRAM_CONFPATHB_TPEN 0x08000000 /* Transaction Passing Enable - Bit 4 */
-
-#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */
-
-/*
- * Memory Bank 0-7 configuration
- */
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
-#define SDRAM_RXBAS_SDBA_ENCODE(n) ((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000))
-#define SDRAM_RXBAS_SDBA_DECODE(n) ((((phys_size_t)(n)) & 0xFFE00000) << 2)
-#endif /* CONFIG_440SPE */
-#if defined(CONFIG_440SP)
-#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
-#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((u32)(n))&0xFF800000))
-#define SDRAM_RXBAS_SDBA_DECODE(n) ((((u32)(n))&0xFF800000))
-#endif /* CONFIG_440SP */
-#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */
-#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((u32)(n))&0x3FF)<<6)
-#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((u32)(n))>>6)&0x3FF)
-#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */
-#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */
-#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */
-#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */
-#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */
-#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */
-#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */
-#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */
-#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */
-#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */
-#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */
-#else /* CONFIG_405EX */
-/*
- * XXX - ToDo:
- * Revisit this file to check if all these 405EX defines are correct and
- * can be used in the common 44x_spd_ddr2 code as well. sr, 2008-06-02
- */
-#define SDRAM_RXBAS_SDSZ_MASK PPC_REG_VAL(19, 0xF)
-#define SDRAM_RXBAS_SDSZ_4MB PPC_REG_VAL(19, 0x0)
-#define SDRAM_RXBAS_SDSZ_8MB PPC_REG_VAL(19, 0x1)
-#define SDRAM_RXBAS_SDSZ_16MB PPC_REG_VAL(19, 0x2)
-#define SDRAM_RXBAS_SDSZ_32MB PPC_REG_VAL(19, 0x3)
-#define SDRAM_RXBAS_SDSZ_64MB PPC_REG_VAL(19, 0x4)
-#define SDRAM_RXBAS_SDSZ_128MB PPC_REG_VAL(19, 0x5)
-#define SDRAM_RXBAS_SDSZ_256MB PPC_REG_VAL(19, 0x6)
-#define SDRAM_RXBAS_SDSZ_512MB PPC_REG_VAL(19, 0x7)
-#define SDRAM_RXBAS_SDSZ_1024MB PPC_REG_VAL(19, 0x8)
-#define SDRAM_RXBAS_SDSZ_2048MB PPC_REG_VAL(19, 0x9)
-#define SDRAM_RXBAS_SDSZ_4096MB PPC_REG_VAL(19, 0xA)
-#define SDRAM_RXBAS_SDSZ_8192MB PPC_REG_VAL(19, 0xB)
-#define SDRAM_RXBAS_SDSZ_8 SDRAM_RXBAS_SDSZ_8MB
-#define SDRAM_RXBAS_SDSZ_16 SDRAM_RXBAS_SDSZ_16MB
-#define SDRAM_RXBAS_SDSZ_32 SDRAM_RXBAS_SDSZ_32MB
-#define SDRAM_RXBAS_SDSZ_64 SDRAM_RXBAS_SDSZ_64MB
-#define SDRAM_RXBAS_SDSZ_128 SDRAM_RXBAS_SDSZ_128MB
-#define SDRAM_RXBAS_SDSZ_256 SDRAM_RXBAS_SDSZ_256MB
-#define SDRAM_RXBAS_SDSZ_512 SDRAM_RXBAS_SDSZ_512MB
-#define SDRAM_RXBAS_SDSZ_1024 SDRAM_RXBAS_SDSZ_1024MB
-#define SDRAM_RXBAS_SDSZ_2048 SDRAM_RXBAS_SDSZ_2048MB
-#define SDRAM_RXBAS_SDSZ_4096 SDRAM_RXBAS_SDSZ_4096MB
-#define SDRAM_RXBAS_SDSZ_8192 SDRAM_RXBAS_SDSZ_8192MB
-#endif /* CONFIG_405EX */
-
-/* The mode definitions are the same for all PPC4xx variants */
-#define SDRAM_RXBAS_SDAM_MODE0 PPC_REG_VAL(23, 0x0)
-#define SDRAM_RXBAS_SDAM_MODE1 PPC_REG_VAL(23, 0x1)
-#define SDRAM_RXBAS_SDAM_MODE2 PPC_REG_VAL(23, 0x2)
-#define SDRAM_RXBAS_SDAM_MODE3 PPC_REG_VAL(23, 0x3)
-#define SDRAM_RXBAS_SDAM_MODE4 PPC_REG_VAL(23, 0x4)
-#define SDRAM_RXBAS_SDAM_MODE5 PPC_REG_VAL(23, 0x5)
-#define SDRAM_RXBAS_SDAM_MODE6 PPC_REG_VAL(23, 0x6)
-#define SDRAM_RXBAS_SDAM_MODE7 PPC_REG_VAL(23, 0x7)
-#define SDRAM_RXBAS_SDAM_MODE8 PPC_REG_VAL(23, 0x8)
-#define SDRAM_RXBAS_SDAM_MODE9 PPC_REG_VAL(23, 0x9)
-#define SDRAM_RXBAS_SDBE_DISABLE PPC_REG_VAL(31, 0x0)
-#define SDRAM_RXBAS_SDBE_ENABLE PPC_REG_VAL(31, 0x1)
-
-/*
- * Memory controller registers
- */
-#if defined(CONFIG_405EX)
-#define SDRAM_BESR 0x00 /* PLB bus error status (read/clear) */
-#define SDRAM_BESRT 0x01 /* PLB bus error status (test/set) */
-#define SDRAM_BEARL 0x02 /* PLB bus error address low */
-#define SDRAM_BEARH 0x03 /* PLB bus error address high */
-#define SDRAM_WMIRQ 0x06 /* PLB write master interrupt (read/clear) */
-#define SDRAM_WMIRQT 0x07 /* PLB write master interrupt (test/set) */
-#define SDRAM_PLBOPT 0x08 /* PLB slave options */
-#define SDRAM_PUABA 0x09 /* PLB upper address base */
-#define SDRAM_MCSTAT 0x1F /* memory controller status */
-#else /* CONFIG_405EX */
-#define SDRAM_MCSTAT 0x14 /* memory controller status */
-#endif /* CONFIG_405EX */
-#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
-#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
-#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
-#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
-#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
-#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
-#define SDRAM_CODT 0x26 /* on die termination for controller */
-#define SDRAM_VVPR 0x27 /* variable VRef programmming */
-#define SDRAM_OPARS 0x28 /* on chip driver control setup */
-#define SDRAM_OPART 0x29 /* on chip driver control trigger */
-#define SDRAM_RTR 0x30 /* refresh timer */
-#define SDRAM_PMIT 0x34 /* power management idle timer */
-#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
-#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
-#define SDRAM_MB2CF 0x48
-#define SDRAM_MB3CF 0x4C
-#define SDRAM_INITPLR0 0x50 /* manual initialization control */
-#define SDRAM_INITPLR1 0x51 /* manual initialization control */
-#define SDRAM_INITPLR2 0x52 /* manual initialization control */
-#define SDRAM_INITPLR3 0x53 /* manual initialization control */
-#define SDRAM_INITPLR4 0x54 /* manual initialization control */
-#define SDRAM_INITPLR5 0x55 /* manual initialization control */
-#define SDRAM_INITPLR6 0x56 /* manual initialization control */
-#define SDRAM_INITPLR7 0x57 /* manual initialization control */
-#define SDRAM_INITPLR8 0x58 /* manual initialization control */
-#define SDRAM_INITPLR9 0x59 /* manual initialization control */
-#define SDRAM_INITPLR10 0x5a /* manual initialization control */
-#define SDRAM_INITPLR11 0x5b /* manual initialization control */
-#define SDRAM_INITPLR12 0x5c /* manual initialization control */
-#define SDRAM_INITPLR13 0x5d /* manual initialization control */
-#define SDRAM_INITPLR14 0x5e /* manual initialization control */
-#define SDRAM_INITPLR15 0x5f /* manual initialization control */
-#define SDRAM_RQDC 0x70 /* read DQS delay control */
-#define SDRAM_RFDC 0x74 /* read feedback delay control */
-#define SDRAM_RDCC 0x78 /* read data capture control */
-#define SDRAM_DLCR 0x7A /* delay line calibration */
-#define SDRAM_CLKTR 0x80 /* DDR clock timing */
-#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
-#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
-#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
-#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
-#define SDRAM_MMODE 0x88 /* memory mode */
-#define SDRAM_MEMODE 0x89 /* memory extended mode */
-#define SDRAM_ECCES 0x98 /* ECC error status */
-#define SDRAM_CID 0xA4 /* core ID */
-#if !defined(CONFIG_405EX)
-#define SDRAM_RID 0xA8 /* revision ID */
-#endif
-#define SDRAM_FCSR 0xB0 /* feedback calibration status */
-#define SDRAM_RTSR 0xB1 /* run time status tracking */
-#if defined(CONFIG_405EX)
-#define SDRAM_RID 0xF8 /* revision ID */
-#endif
-
-/*
- * Memory Controller Bus Error Status
- */
-#define SDRAM_BESR_MASK PPC_REG_VAL(7, 0xFF)
-#define SDRAM_BESR_M0ID_MASK PPC_REG_VAL(3, 0xF)
-#define SDRAM_BESR_M0ID_ICU PPC_REG_VAL(3, 0x0)
-#define SDRAM_BESR_M0ID_PCIE0 PPC_REG_VAL(3, 0x1)
-#define SDRAM_BESR_M0ID_PCIE1 PPC_REG_VAL(3, 0x2)
-#define SDRAM_BESR_M0ID_DMA PPC_REG_VAL(3, 0x3)
-#define SDRAM_BESR_M0ID_DCU PPC_REG_VAL(3, 0x4)
-#define SDRAM_BESR_M0ID_OPB PPC_REG_VAL(3, 0x5)
-#define SDRAM_BESR_M0ID_MAL PPC_REG_VAL(3, 0x6)
-#define SDRAM_BESR_M0ID_SEC PPC_REG_VAL(3, 0x7)
-#define SDRAM_BESR_M0ET_MASK PPC_REG_VAL(6, 0x7)
-#define SDRAM_BESR_M0ET_NONE PPC_REG_VAL(6, 0x0)
-#define SDRAM_BESR_M0ET_ECC PPC_REG_VAL(6, 0x1)
-#define SDRAM_BESR_M0RW_WRITE PPC_REG_VAL(7, 0)
-#define SDRAM_BESR_M0RW_READ PPC_REG_VAL(8, 1)
-
-/*
- * Memory Controller Status
- */
-#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
-#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
-#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
-#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */
-#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
-#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */
-#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */
-#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */
-#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */
-
-/*
- * Memory Controller Options 1
- */
-#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/
-#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
-#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
-#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((u32)(n))>>28)&0x3)
-#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
-#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
-#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
-#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
-#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
-#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
-#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
-#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
-#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
-#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
-#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
-#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
-#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
-#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
-#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
-#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
-#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
-#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
-#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
-#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
-#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
-#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
-#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
-#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
-#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
-#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
-#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
-#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
-#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
-
-/*
- * Memory Controller Options 2
- */
-#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
-#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
-#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
-#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
-#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
-#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
-#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
-#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
-#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
-#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
-#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
-#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
-#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
-#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
-#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
-#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
-
-/*
- * SDRAM Refresh Timer Register
- */
-#define SDRAM_RTR_RINT_MASK 0xFFF80000
-#define SDRAM_RTR_RINT_ENCODE(n) ((((u32)(n))&0xFFF8)<<16)
-#define SDRAM_RTR_RINT_DECODE(n) ((((u32)(n))>>16)&0xFFF8)
-
-/*
- * SDRAM Read DQS Delay Control Register
- */
-#define SDRAM_RQDC_RQDE_MASK 0x80000000
-#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
-#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
-#define SDRAM_RQDC_RQFD_MASK 0x000001FF
-#define SDRAM_RQDC_RQFD_ENCODE(n) ((((u32)(n))&0x1FF)<<0)
-
-#define SDRAM_RQDC_RQFD_MAX 0x1FF
-
-/*
- * SDRAM Read Data Capture Control Register
- */
-#define SDRAM_RDCC_RDSS_MASK 0xC0000000
-#define SDRAM_RDCC_RDSS_T1 0x00000000
-#define SDRAM_RDCC_RDSS_T2 0x40000000
-#define SDRAM_RDCC_RDSS_T3 0x80000000
-#define SDRAM_RDCC_RDSS_T4 0xC0000000
-#define SDRAM_RDCC_RSAE_MASK 0x00000001
-#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
-#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
-#define SDRAM_RDCC_RDSS_ENCODE(n) ((((u32)(n))&0x03)<<30)
-#define SDRAM_RDCC_RDSS_DECODE(n) ((((u32)(n))>>30)&0x03)
-
-/*
- * SDRAM Read Feedback Delay Control Register
- */
-#define SDRAM_RFDC_ARSE_MASK 0x80000000
-#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
-#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
-#define SDRAM_RFDC_RFOS_MASK 0x007F0000
-#define SDRAM_RFDC_RFOS_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define SDRAM_RFDC_RFFD_MASK 0x000007FF
-#define SDRAM_RFDC_RFFD_ENCODE(n) ((((u32)(n))&0x7FF)<<0)
-
-#define SDRAM_RFDC_RFFD_MAX 0x7FF
-
-/*
- * SDRAM Delay Line Calibration Register
- */
-#define SDRAM_DLCR_DCLM_MASK 0x80000000
-#define SDRAM_DLCR_DCLM_MANUAL 0x80000000
-#define SDRAM_DLCR_DCLM_AUTO 0x00000000
-#define SDRAM_DLCR_DLCR_MASK 0x08000000
-#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
-#define SDRAM_DLCR_DLCR_IDLE 0x00000000
-#define SDRAM_DLCR_DLCS_MASK 0x07000000
-#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
-#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
-#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
-#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
-#define SDRAM_DLCR_DLCS_ERROR 0x04000000
-#define SDRAM_DLCR_DLCV_MASK 0x000001FF
-#define SDRAM_DLCR_DLCV_ENCODE(n) ((((u32)(n))&0x1FF)<<0)
-#define SDRAM_DLCR_DLCV_DECODE(n) ((((u32)(n))>>0)&0x1FF)
-
-/*
- * SDRAM Memory On Die Terimination Control Register
- */
-#define SDRAM_MODT_ODTON_DISABLE PPC_REG_VAL(0, 0)
-#define SDRAM_MODT_ODTON_ENABLE PPC_REG_VAL(0, 1)
-#define SDRAM_MODT_EB1W_DISABLE PPC_REG_VAL(1, 0)
-#define SDRAM_MODT_EB1W_ENABLE PPC_REG_VAL(1, 1)
-#define SDRAM_MODT_EB1R_DISABLE PPC_REG_VAL(2, 0)
-#define SDRAM_MODT_EB1R_ENABLE PPC_REG_VAL(2, 1)
-#define SDRAM_MODT_EB0W_DISABLE PPC_REG_VAL(7, 0)
-#define SDRAM_MODT_EB0W_ENABLE PPC_REG_VAL(7, 1)
-#define SDRAM_MODT_EB0R_DISABLE PPC_REG_VAL(8, 0)
-#define SDRAM_MODT_EB0R_ENABLE PPC_REG_VAL(8, 1)
-
-/*
- * SDRAM Controller On Die Termination Register
- */
-#define SDRAM_CODT_ODT_ON PPC_REG_VAL(0, 1)
-#define SDRAM_CODT_ODT_OFF PPC_REG_VAL(0, 0)
-#define SDRAM_CODT_RK1W_ON PPC_REG_VAL(1, 1)
-#define SDRAM_CODT_RK1W_OFF PPC_REG_VAL(1, 0)
-#define SDRAM_CODT_RK1R_ON PPC_REG_VAL(2, 1)
-#define SDRAM_CODT_RK1R_OFF PPC_REG_VAL(2, 0)
-#define SDRAM_CODT_RK0W_ON PPC_REG_VAL(7, 1)
-#define SDRAM_CODT_RK0W_OFF PPC_REG_VAL(7, 0)
-#define SDRAM_CODT_RK0R_ON PPC_REG_VAL(8, 1)
-#define SDRAM_CODT_RK0R_OFF PPC_REG_VAL(8, 0)
-#define SDRAM_CODT_ODTSH_NORMAL PPC_REG_VAL(10, 0)
-#define SDRAM_CODT_ODTSH_REMOVE_ONE_AT_END PPC_REG_VAL(10, 1)
-#define SDRAM_CODT_ODTSH_ADD_ONE_AT_START PPC_REG_VAL(10, 2)
-#define SDRAM_CODT_ODTSH_SHIFT_ONE_EARLIER PPC_REG_VAL(10, 3)
-#define SDRAM_CODT_CODTZ_75OHM PPC_REG_VAL(11, 0)
-#define SDRAM_CODT_CKEG_ON PPC_REG_VAL(12, 1)
-#define SDRAM_CODT_CKEG_OFF PPC_REG_VAL(12, 0)
-#define SDRAM_CODT_CTLG_ON PPC_REG_VAL(13, 1)
-#define SDRAM_CODT_CTLG_OFF PPC_REG_VAL(13, 0)
-#define SDRAM_CODT_FBDG_ON PPC_REG_VAL(14, 1)
-#define SDRAM_CODT_FBDG_OFF PPC_REG_VAL(14, 0)
-#define SDRAM_CODT_FBRG_ON PPC_REG_VAL(15, 1)
-#define SDRAM_CODT_FBRG_OFF PPC_REG_VAL(15, 0)
-#define SDRAM_CODT_CKLZ_36OHM PPC_REG_VAL(18, 1)
-#define SDRAM_CODT_CKLZ_18OHM PPC_REG_VAL(18, 0)
-#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK PPC_REG_VAL(26, 1)
-#define SDRAM_CODT_DQS_2_5_V_DDR1 PPC_REG_VAL(26, 0)
-#define SDRAM_CODT_DQS_1_8_V_DDR2 PPC_REG_VAL(26, 1)
-#define SDRAM_CODT_DQS_MASK PPC_REG_VAL(27, 1)
-#define SDRAM_CODT_DQS_DIFFERENTIAL PPC_REG_VAL(27, 0)
-#define SDRAM_CODT_DQS_SINGLE_END PPC_REG_VAL(27, 1)
-#define SDRAM_CODT_CKSE_DIFFERENTIAL PPC_REG_VAL(28, 0)
-#define SDRAM_CODT_CKSE_SINGLE_END PPC_REG_VAL(28, 1)
-#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END PPC_REG_VAL(29, 1)
-#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END PPC_REG_VAL(30, 1)
-#define SDRAM_CODT_IO_HIZ PPC_REG_VAL(31, 0)
-#define SDRAM_CODT_IO_NMODE PPC_REG_VAL(31, 1)
-
-/*
- * SDRAM Initialization Preload Register
- */
-#define SDRAM_INITPLR_ENABLE PPC_REG_VAL(0, 1)
-#define SDRAM_INITPLR_DISABLE PPC_REG_VAL(0, 0)
-#define SDRAM_INITPLR_IMWT_MASK PPC_REG_VAL(8, 0xFF)
-#define SDRAM_INITPLR_IMWT_ENCODE(n) PPC_REG_VAL(8, \
- (static_cast(u32, \
- n)) \
- & 0xFF)
-#define SDRAM_INITPLR_ICMD_MASK PPC_REG_VAL(12, 0x7)
-#define SDRAM_INITPLR_ICMD_ENCODE(n) PPC_REG_VAL(12, \
- (static_cast(u32, \
- n)) \
- & 0x7)
-#define SDRAM_INITPLR_IBA_MASK PPC_REG_VAL(15, 0x7)
-#define SDRAM_INITPLR_IBA_ENCODE(n) PPC_REG_VAL(15, \
- (static_cast(u32, \
- n)) \
- & 0x7)
-#define SDRAM_INITPLR_IMA_MASK PPC_REG_VAL(31, 0x7FFF)
-#define SDRAM_INITPLR_IMA_ENCODE(n) PPC_REG_VAL(31, \
- (static_cast(u32, \
- n)) \
- & 0x7FFF)
-
-/*
- * JEDEC DDR Initialization Commands
- */
-#define JEDEC_CMD_NOP 7
-#define JEDEC_CMD_PRECHARGE 2
-#define JEDEC_CMD_REFRESH 1
-#define JEDEC_CMD_EMR 0
-#define JEDEC_CMD_READ 5
-#define JEDEC_CMD_WRITE 4
-
-/*
- * JEDEC Precharge Command Memory Address Arguments
- */
-#define JEDEC_MA_PRECHARGE_ONE (0 << 10)
-#define JEDEC_MA_PRECHARGE_ALL (1 << 10)
-
-/*
- * JEDEC DDR EMR Command Bank Address Arguments
- */
-#define JEDEC_BA_MR 0
-#define JEDEC_BA_EMR 1
-#define JEDEC_BA_EMR2 2
-#define JEDEC_BA_EMR3 3
-
-/*
- * JEDEC DDR Mode Register
- */
-#define JEDEC_MA_MR_PDMODE_FAST_EXIT (0 << 12)
-#define JEDEC_MA_MR_PDMODE_SLOW_EXIT (1 << 12)
-#define JEDEC_MA_MR_WR_MASK (0x7 << 9)
-#define JEDEC_MA_MR_WR_DDR1 (0x0 << 9)
-#define JEDEC_MA_MR_WR_DDR2_2_CYC (0x1 << 9)
-#define JEDEC_MA_MR_WR_DDR2_3_CYC (0x2 << 9)
-#define JEDEC_MA_MR_WR_DDR2_4_CYC (0x3 << 9)
-#define JEDEC_MA_MR_WR_DDR2_5_CYC (0x4 << 9)
-#define JEDEC_MA_MR_WR_DDR2_6_CYC (0x5 << 9)
-#define JEDEC_MA_MR_DLL_RESET (1 << 8)
-#define JEDEC_MA_MR_MODE_NORMAL (0 << 8)
-#define JEDEC_MA_MR_MODE_TEST (1 << 8)
-#define JEDEC_MA_MR_CL_MASK (0x7 << 4)
-#define JEDEC_MA_MR_CL_DDR1_2_0_CLK (0x2 << 4)
-#define JEDEC_MA_MR_CL_DDR1_2_5_CLK (0x6 << 4)
-#define JEDEC_MA_MR_CL_DDR1_3_0_CLK (0x3 << 4)
-#define JEDEC_MA_MR_CL_DDR2_2_0_CLK (0x2 << 4)
-#define JEDEC_MA_MR_CL_DDR2_3_0_CLK (0x3 << 4)
-#define JEDEC_MA_MR_CL_DDR2_4_0_CLK (0x4 << 4)
-#define JEDEC_MA_MR_CL_DDR2_5_0_CLK (0x5 << 4)
-#define JEDEC_MA_MR_CL_DDR2_6_0_CLK (0x6 << 4)
-#define JEDEC_MA_MR_CL_DDR2_7_0_CLK (0x7 << 4)
-#define JEDEC_MA_MR_BTYP_SEQUENTIAL (0 << 3)
-#define JEDEC_MA_MR_BTYP_INTERLEAVED (1 << 3)
-#define JEDEC_MA_MR_BLEN_MASK (0x7 << 0)
-#define JEDEC_MA_MR_BLEN_4 (2 << 0)
-#define JEDEC_MA_MR_BLEN_8 (3 << 0)
-
-/*
- * JEDEC DDR Extended Mode Register
- */
-#define JEDEC_MA_EMR_OUTPUT_MASK (1 << 12)
-#define JEDEC_MA_EMR_OUTPUT_ENABLE (0 << 12)
-#define JEDEC_MA_EMR_OUTPUT_DISABLE (1 << 12)
-#define JEDEC_MA_EMR_RQDS_MASK (1 << 11)
-#define JEDEC_MA_EMR_RDQS_DISABLE (0 << 11)
-#define JEDEC_MA_EMR_RDQS_ENABLE (1 << 11)
-#define JEDEC_MA_EMR_DQS_MASK (1 << 10)
-#define JEDEC_MA_EMR_DQS_DISABLE (1 << 10)
-#define JEDEC_MA_EMR_DQS_ENABLE (0 << 10)
-#define JEDEC_MA_EMR_OCD_MASK (0x7 << 7)
-#define JEDEC_MA_EMR_OCD_EXIT (0 << 7)
-#define JEDEC_MA_EMR_OCD_ENTER (7 << 7)
-#define JEDEC_MA_EMR_AL_DDR1_0_CYC (0 << 3)
-#define JEDEC_MA_EMR_AL_DDR2_1_CYC (1 << 3)
-#define JEDEC_MA_EMR_AL_DDR2_2_CYC (2 << 3)
-#define JEDEC_MA_EMR_AL_DDR2_3_CYC (3 << 3)
-#define JEDEC_MA_EMR_AL_DDR2_4_CYC (4 << 3)
-#define JEDEC_MA_EMR_RTT_MASK (0x11 << 2)
-#define JEDEC_MA_EMR_RTT_DISABLED (0x00 << 2)
-#define JEDEC_MA_EMR_RTT_75OHM (0x01 << 2)
-#define JEDEC_MA_EMR_RTT_150OHM (0x10 << 2)
-#define JEDEC_MA_EMR_RTT_50OHM (0x11 << 2)
-#define JEDEC_MA_EMR_ODS_MASK (1 << 1)
-#define JEDEC_MA_EMR_ODS_NORMAL (0 << 1)
-#define JEDEC_MA_EMR_ODS_WEAK (1 << 1)
-#define JEDEC_MA_EMR_DLL_MASK (1 << 0)
-#define JEDEC_MA_EMR_DLL_ENABLE (0 << 0)
-#define JEDEC_MA_EMR_DLL_DISABLE (1 << 0)
-
-/*
- * JEDEC DDR Extended Mode Register 2
- */
-#define JEDEC_MA_EMR2_TEMP_COMMERCIAL (0 << 7)
-#define JEDEC_MA_EMR2_TEMP_INDUSTRIAL (1 << 7)
-
-/*
- * SDRAM Mode Register (Corresponds 1:1 w/ JEDEC Mode Register)
- */
-#define SDRAM_MMODE_WR_MASK JEDEC_MA_MR_WR_MASK
-#define SDRAM_MMODE_WR_DDR1 JEDEC_MA_MR_WR_DDR1
-#define SDRAM_MMODE_WR_DDR2_2_CYC JEDEC_MA_MR_WR_DDR2_2_CYC
-#define SDRAM_MMODE_WR_DDR2_3_CYC JEDEC_MA_MR_WR_DDR2_3_CYC
-#define SDRAM_MMODE_WR_DDR2_4_CYC JEDEC_MA_MR_WR_DDR2_4_CYC
-#define SDRAM_MMODE_WR_DDR2_5_CYC JEDEC_MA_MR_WR_DDR2_5_CYC
-#define SDRAM_MMODE_WR_DDR2_6_CYC JEDEC_MA_MR_WR_DDR2_6_CYC
-#define SDRAM_MMODE_DCL_MASK JEDEC_MA_MR_CL_MASK
-#define SDRAM_MMODE_DCL_DDR1_2_0_CLK JEDEC_MA_MR_CL_DDR1_2_0_CLK
-#define SDRAM_MMODE_DCL_DDR1_2_5_CLK JEDEC_MA_MR_CL_DDR1_2_5_CLK
-#define SDRAM_MMODE_DCL_DDR1_3_0_CLK JEDEC_MA_MR_CL_DDR1_3_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_2_0_CLK JEDEC_MA_MR_CL_DDR2_2_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_3_0_CLK JEDEC_MA_MR_CL_DDR2_3_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_4_0_CLK JEDEC_MA_MR_CL_DDR2_4_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_5_0_CLK JEDEC_MA_MR_CL_DDR2_5_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_6_0_CLK JEDEC_MA_MR_CL_DDR2_6_0_CLK
-#define SDRAM_MMODE_DCL_DDR2_7_0_CLK JEDEC_MA_MR_CL_DDR2_7_0_CLK
-#define SDRAM_MMODE_BTYP_SEQUENTIAL JEDEC_MA_MR_BTYP_SEQUENTIAL
-#define SDRAM_MMODE_BTYP_INTERLEAVED JEDEC_MA_MR_BTYP_INTERLEAVED
-#define SDRAM_MMODE_BLEN_MASK JEDEC_MA_MR_BLEN_MASK
-#define SDRAM_MMODE_BLEN_4 JEDEC_MA_MR_BLEN_4
-#define SDRAM_MMODE_BLEN_8 JEDEC_MA_MR_BLEN_8
-
-/*
- * SDRAM Extended Mode Register (Corresponds 1:1 w/ JEDEC Extended
- * Mode Register)
- */
-#define SDRAM_MEMODE_QOFF_MASK JEDEC_MA_EMR_OUTPUT_MASK
-#define SDRAM_MEMODE_QOFF_DISABLE JEDEC_MA_EMR_OUTPUT_DISABLE
-#define SDRAM_MEMODE_QOFF_ENABLE JEDEC_MA_EMR_OUTPUT_ENABLE
-#define SDRAM_MEMODE_RDQS_MASK JEDEC_MA_EMR_RQDS_MASK
-#define SDRAM_MEMODE_RDQS_DISABLE JEDEC_MA_EMR_RDQS_DISABLE
-#define SDRAM_MEMODE_RDQS_ENABLE JEDEC_MA_EMR_RDQS_ENABLE
-#define SDRAM_MEMODE_DQS_MASK JEDEC_MA_EMR_DQS_MASK
-#define SDRAM_MEMODE_DQS_DISABLE JEDEC_MA_EMR_DQS_DISABLE
-#define SDRAM_MEMODE_DQS_ENABLE JEDEC_MA_EMR_DQS_ENABLE
-#define SDRAM_MEMODE_AL_DDR1_0_CYC JEDEC_MA_EMR_AL_DDR1_0_CYC
-#define SDRAM_MEMODE_AL_DDR2_1_CYC JEDEC_MA_EMR_AL_DDR2_1_CYC
-#define SDRAM_MEMODE_AL_DDR2_2_CYC JEDEC_MA_EMR_AL_DDR2_2_CYC
-#define SDRAM_MEMODE_AL_DDR2_3_CYC JEDEC_MA_EMR_AL_DDR2_3_CYC
-#define SDRAM_MEMODE_AL_DDR2_4_CYC JEDEC_MA_EMR_AL_DDR2_4_CYC
-#define SDRAM_MEMODE_RTT_MASK JEDEC_MA_EMR_RTT_MASK
-#define SDRAM_MEMODE_RTT_DISABLED JEDEC_MA_EMR_RTT_DISABLED
-#define SDRAM_MEMODE_RTT_75OHM JEDEC_MA_EMR_RTT_75OHM
-#define SDRAM_MEMODE_RTT_150OHM JEDEC_MA_EMR_RTT_150OHM
-#define SDRAM_MEMODE_RTT_50OHM JEDEC_MA_EMR_RTT_50OHM
-#define SDRAM_MEMODE_DIC_MASK JEDEC_MA_EMR_ODS_MASK
-#define SDRAM_MEMODE_DIC_NORMAL JEDEC_MA_EMR_ODS_NORMAL
-#define SDRAM_MEMODE_DIC_WEAK JEDEC_MA_EMR_ODS_WEAK
-#define SDRAM_MEMODE_DLL_MASK JEDEC_MA_EMR_DLL_MASK
-#define SDRAM_MEMODE_DLL_DISABLE JEDEC_MA_EMR_DLL_DISABLE
-#define SDRAM_MEMODE_DLL_ENABLE JEDEC_MA_EMR_DLL_ENABLE
-
-/*
- * SDRAM Clock Timing Register
- */
-#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
-#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
-#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
-#define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000
-#define SDRAM_CLKTR_CLKP_270_DEG_ADV 0xC0000000
-
-/*
- * SDRAM Write Timing Register
- */
-#define SDRAM_WRDTR_LLWP_MASK 0x10000000
-#define SDRAM_WRDTR_LLWP_DIS 0x10000000
-#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
-#define SDRAM_WRDTR_WTR_MASK 0x0E000000
-#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
-#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000
-#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
-#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
-
-/*
- * SDRAM SDTR1 Options
- */
-#define SDRAM_SDTR1_LDOF_MASK 0x80000000
-#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
-#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
-#define SDRAM_SDTR1_RTW_MASK 0x00F00000
-#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
-#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
-#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
-#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
-#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
-#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
-#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000
-#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
-
-/*
- * SDRAM SDTR2 Options
- */
-#define SDRAM_SDTR2_RCD_MASK 0xF0000000
-#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
-#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
-#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
-#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
-#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
-#define SDRAM_SDTR2_WTR_MASK 0x0F000000
-#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
-#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
-#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
-#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
-#define SDRAM_SDTR3_WTR_ENCODE(n) ((((u32)(n))&0xF)<<24)
-#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
-#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
-#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
-#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
-#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
-#define SDRAM_SDTR2_WPC_MASK 0x0000F000
-#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
-#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
-#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
-#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
-#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
-#define SDRAM_SDTR3_WPC_ENCODE(n) ((((u32)(n))&0xF)<<12)
-#define SDRAM_SDTR2_RPC_MASK 0x00000F00
-#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
-#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
-#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
-#define SDRAM_SDTR2_RP_MASK 0x000000F0
-#define SDRAM_SDTR2_RP_3_CLK 0x00000030
-#define SDRAM_SDTR2_RP_4_CLK 0x00000040
-#define SDRAM_SDTR2_RP_5_CLK 0x00000050
-#define SDRAM_SDTR2_RP_6_CLK 0x00000060
-#define SDRAM_SDTR2_RP_7_CLK 0x00000070
-#define SDRAM_SDTR2_RRD_MASK 0x0000000F
-#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
-#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
-
-/*
- * SDRAM SDTR3 Options
- */
-#define SDRAM_SDTR3_RAS_MASK 0x1F000000
-#define SDRAM_SDTR3_RAS_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define SDRAM_SDTR3_RC_MASK 0x001F0000
-#define SDRAM_SDTR3_RC_ENCODE(n) ((((u32)(n))&0x1F)<<16)
-#define SDRAM_SDTR3_XCS_MASK 0x00001F00
-#define SDRAM_SDTR3_XCS 0x00000D00
-#define SDRAM_SDTR3_RFC_MASK 0x0000003F
-#define SDRAM_SDTR3_RFC_ENCODE(n) ((((u32)(n))&0x3F)<<0)
-
-/*
- * ECC Error Status
- */
-#define SDRAM_ECCES_MASK PPC_REG_VAL(21, 0x3FFFFF)
-#define SDRAM_ECCES_BNCE_MASK PPC_REG_VAL(15, 0xFFFF)
-#define SDRAM_ECCES_BNCE_ENCODE(lane) PPC_REG_VAL(((lane) & 0xF), 1)
-#define SDRAM_ECCES_CKBER_MASK PPC_REG_VAL(17, 0x3)
-#define SDRAM_ECCES_CKBER_NONE PPC_REG_VAL(17, 0)
-#define SDRAM_ECCES_CKBER_16_ECC_0_3 PPC_REG_VAL(17, 2)
-#define SDRAM_ECCES_CKBER_32_ECC_0_3 PPC_REG_VAL(17, 1)
-#define SDRAM_ECCES_CKBER_32_ECC_4_8 PPC_REG_VAL(17, 2)
-#define SDRAM_ECCES_CKBER_32_ECC_0_8 PPC_REG_VAL(17, 3)
-#define SDRAM_ECCES_CE PPC_REG_VAL(18, 1)
-#define SDRAM_ECCES_UE PPC_REG_VAL(19, 1)
-#define SDRAM_ECCES_BKNER_MASK PPC_REG_VAL(21, 0x3)
-#define SDRAM_ECCES_BK0ER PPC_REG_VAL(20, 1)
-#define SDRAM_ECCES_BK1ER PPC_REG_VAL(21, 1)
-
-/*
- * Memory Bank 0-1 configuration
- */
-#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
-#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
-#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
-#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
-#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
-#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
-#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
-#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
-#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
-#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
-#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
-#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
-#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
-#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
-
-#define SDRAM_RTSR_TRK1SM_MASK 0xC0000000 /* Tracking State Mach 1*/
-#define SDRAM_RTSR_TRK1SM_ATBASE 0x00000000 /* atbase state */
-#define SDRAM_RTSR_TRK1SM_MISSED 0x40000000 /* missed state */
-#define SDRAM_RTSR_TRK1SM_ATPLS1 0x80000000 /* atpls1 state */
-#define SDRAM_RTSR_TRK1SM_RESET 0xC0000000 /* reset state */
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
-
-#if defined(CONFIG_SDRAM_PPC4xx_DENALI_DDR2)
-/*
- * SDRAM Controller
- */
-#define DDR0_00 0x00
-#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
-#define DDR0_00_INT_ACK_ALL 0x7F000000
-#define DDR0_00_INT_ACK_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_00_INT_ACK_DECODE(n) ((((u32)(n))>>24)&0x7F)
-/* Status */
-#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
-/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT0 0x00010000
-/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT1 0x00020000
-/* Bit2. Single correctable ECC event detected */
-#define DDR0_00_INT_STATUS_BIT2 0x00040000
-/* Bit3. Multiple correctable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT3 0x00080000
-/* Bit4. Single uncorrectable ECC event detected. */
-#define DDR0_00_INT_STATUS_BIT4 0x00100000
-/* Bit5. Multiple uncorrectable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT5 0x00200000
-/* Bit6. DRAM initialization complete. */
-#define DDR0_00_INT_STATUS_BIT6 0x00400000
-/* Bit7. Logical OR of all lower bits. */
-#define DDR0_00_INT_STATUS_BIT7 0x00800000
-
-#define DDR0_00_INT_STATUS_ENCODE(n) ((((u32)(n))&0xFF)<<16)
-#define DDR0_00_INT_STATUS_DECODE(n) ((((u32)(n))>>16)&0xFF)
-#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
-#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
-#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_00_DLL_START_POINT_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_01 0x01
-#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
-#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
-#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((u32)(n))&0x1F)<<16)
-#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((u32)(n))>>16)&0x1F)
-#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
-#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((u32)(n))&0x7)<<8)
-#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((u32)(n))>>8)&0x7)
-#define DDR0_01_INT_MASK_MASK 0x000000FF
-#define DDR0_01_INT_MASK_ENCODE(n) ((((u32)(n))&0xFF)<<0)
-#define DDR0_01_INT_MASK_DECODE(n) ((((u32)(n))>>0)&0xFF)
-#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
-#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
-
-#define DDR0_02 0x02
-#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
-#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((u32)(n))&0x2)<<24)
-#define DDR0_02_MAX_CS_REG_DECODE(n) ((((u32)(n))>>24)&0x2)
-#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
-#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((u32)(n))&0xF)<<16)
-#define DDR0_02_MAX_COL_REG_DECODE(n) ((((u32)(n))>>16)&0xF)
-#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
-#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((u32)(n))&0xF)<<8)
-#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((u32)(n))>>8)&0xF)
-#define DDR0_02_START_MASK 0x00000001
-#define DDR0_02_START_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_02_START_DECODE(n) ((((u32)(n))>>0)&0x1)
-#define DDR0_02_START_OFF 0x00000000
-#define DDR0_02_START_ON 0x00000001
-
-#define DDR0_03 0x03
-#define DDR0_03_BSTLEN_MASK 0x07000000
-#define DDR0_03_BSTLEN_ENCODE(n) ((((u32)(n))&0x7)<<24)
-#define DDR0_03_BSTLEN_DECODE(n) ((((u32)(n))>>24)&0x7)
-#define DDR0_03_CASLAT_MASK 0x00070000
-#define DDR0_03_CASLAT_ENCODE(n) ((((u32)(n))&0x7)<<16)
-#define DDR0_03_CASLAT_DECODE(n) ((((u32)(n))>>16)&0x7)
-#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
-#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((u32)(n))&0xF)<<8)
-#define DDR0_03_CASLAT_LIN_DECODE(n) ((((u32)(n))>>8)&0xF)
-#define DDR0_03_INITAREF_MASK 0x0000000F
-#define DDR0_03_INITAREF_ENCODE(n) ((((u32)(n))&0xF)<<0)
-#define DDR0_03_INITAREF_DECODE(n) ((((u32)(n))>>0)&0xF)
-
-#define DDR0_04 0x04
-#define DDR0_04_TRC_MASK 0x1F000000
-#define DDR0_04_TRC_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define DDR0_04_TRC_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_04_TRRD_MASK 0x00070000
-#define DDR0_04_TRRD_ENCODE(n) ((((u32)(n))&0x7)<<16)
-#define DDR0_04_TRRD_DECODE(n) ((((u32)(n))>>16)&0x7)
-#define DDR0_04_TRTP_MASK 0x00000700
-#define DDR0_04_TRTP_ENCODE(n) ((((u32)(n))&0x7)<<8)
-#define DDR0_04_TRTP_DECODE(n) ((((u32)(n))>>8)&0x7)
-
-#define DDR0_05 0x05
-#define DDR0_05_TMRD_MASK 0x1F000000
-#define DDR0_05_TMRD_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define DDR0_05_TMRD_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_05_TEMRS_MASK 0x00070000
-#define DDR0_05_TEMRS_ENCODE(n) ((((u32)(n))&0x7)<<16)
-#define DDR0_05_TEMRS_DECODE(n) ((((u32)(n))>>16)&0x7)
-#define DDR0_05_TRP_MASK 0x00000F00
-#define DDR0_05_TRP_ENCODE(n) ((((u32)(n))&0xF)<<8)
-#define DDR0_05_TRP_DECODE(n) ((((u32)(n))>>8)&0xF)
-#define DDR0_05_TRAS_MIN_MASK 0x000000FF
-#define DDR0_05_TRAS_MIN_ENCODE(n) ((((u32)(n))&0xFF)<<0)
-#define DDR0_05_TRAS_MIN_DECODE(n) ((((u32)(n))>>0)&0xFF)
-
-#define DDR0_06 0x06
-#define DDR0_06_WRITEINTERP_MASK 0x01000000
-#define DDR0_06_WRITEINTERP_ENCODE(n) ((((u32)(n))&0x1)<<24)
-#define DDR0_06_WRITEINTERP_DECODE(n) ((((u32)(n))>>24)&0x1)
-#define DDR0_06_TWTR_MASK 0x00070000
-#define DDR0_06_TWTR_ENCODE(n) ((((u32)(n))&0x7)<<16)
-#define DDR0_06_TWTR_DECODE(n) ((((u32)(n))>>16)&0x7)
-#define DDR0_06_TDLL_MASK 0x0000FF00
-#define DDR0_06_TDLL_ENCODE(n) ((((u32)(n))&0xFF)<<8)
-#define DDR0_06_TDLL_DECODE(n) ((((u32)(n))>>8)&0xFF)
-#define DDR0_06_TRFC_MASK 0x0000007F
-#define DDR0_06_TRFC_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_06_TRFC_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_07 0x07
-#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
-#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((u32)(n))&0x1)<<24)
-#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((u32)(n))>>24)&0x1)
-#define DDR0_07_TFAW_MASK 0x001F0000
-#define DDR0_07_TFAW_ENCODE(n) ((((u32)(n))&0x1F)<<16)
-#define DDR0_07_TFAW_DECODE(n) ((((u32)(n))>>16)&0x1F)
-#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
-#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((u32)(n))&0x1)<<8)
-#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((u32)(n))>>8)&0x1)
-#define DDR0_07_AREFRESH_MASK 0x00000001
-#define DDR0_07_AREFRESH_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_07_AREFRESH_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_08 0x08
-#define DDR0_08_WRLAT_MASK 0x07000000
-#define DDR0_08_WRLAT_ENCODE(n) ((((u32)(n))&0x7)<<24)
-#define DDR0_08_WRLAT_DECODE(n) ((((u32)(n))>>24)&0x7)
-#define DDR0_08_TCPD_MASK 0x00FF0000
-#define DDR0_08_TCPD_ENCODE(n) ((((u32)(n))&0xFF)<<16)
-#define DDR0_08_TCPD_DECODE(n) ((((u32)(n))>>16)&0xFF)
-#define DDR0_08_DQS_N_EN_MASK 0x00000100
-#define DDR0_08_DQS_N_EN_ENCODE(n) ((((u32)(n))&0x1)<<8)
-#define DDR0_08_DQS_N_EN_DECODE(n) ((((u32)(n))>>8)&0x1)
-#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
-#define DDR0_08_DDRII_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_08_DDRII_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_09 0x09
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((u32)(n))&0x1F)<<24)
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_09_RTT_0_MASK 0x00030000
-#define DDR0_09_RTT_0_ENCODE(n) ((((u32)(n))&0x3)<<16)
-#define DDR0_09_RTT_0_DECODE(n) ((((u32)(n))>>16)&0x3)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
-#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_10 0x0A
-#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
-#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((u32)(n))&0x1)<<16)
-#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((u32)(n))>>16)&0x1)
-#define DDR0_10_CS_MAP_MASK 0x00000300
-#define DDR0_10_CS_MAP_NO_MEM 0x00000000
-#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
-#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
-#define DDR0_10_CS_MAP_ENCODE(n) ((((u32)(n))&0x3)<<8)
-#define DDR0_10_CS_MAP_DECODE(n) ((((u32)(n))>>8)&0x3)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((u32)(n))&0x1F)<<0)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((u32)(n))>>0)&0x1F)
-
-#define DDR0_11 0x0B
-#define DDR0_11_SREFRESH_MASK 0x01000000
-#define DDR0_11_SREFRESH_ENCODE(n) ((((u32)(n))&0x1)<<24)
-#define DDR0_11_SREFRESH_DECODE(n) ((((u32)(n))>>24)&0x1F)
-#define DDR0_11_TXSNR_MASK 0x00FF0000
-#define DDR0_11_TXSNR_ENCODE(n) ((((u32)(n))&0xFF)<<16)
-#define DDR0_11_TXSNR_DECODE(n) ((((u32)(n))>>16)&0xFF)
-#define DDR0_11_TXSR_MASK 0x0000FF00
-#define DDR0_11_TXSR_ENCODE(n) ((((u32)(n))&0xFF)<<8)
-#define DDR0_11_TXSR_DECODE(n) ((((u32)(n))>>8)&0xFF)
-
-#define DDR0_12 0x0C
-#define DDR0_12_TCKE_MASK 0x0000007
-#define DDR0_12_TCKE_ENCODE(n) ((((u32)(n))&0x7)<<0)
-#define DDR0_12_TCKE_DECODE(n) ((((u32)(n))>>0)&0x7)
-
-#define DDR0_14 0x0E
-#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
-#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((u32)(n))&0x1)<<24)
-#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((u32)(n))>>24)&0x1)
-#define DDR0_14_REDUC_MASK 0x00010000
-#define DDR0_14_REDUC_64BITS 0x00000000
-#define DDR0_14_REDUC_32BITS 0x00010000
-#define DDR0_14_REDUC_ENCODE(n) ((((u32)(n))&0x1)<<16)
-#define DDR0_14_REDUC_DECODE(n) ((((u32)(n))>>16)&0x1)
-#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
-#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((u32)(n))&0x1)<<8)
-#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((u32)(n))>>8)&0x1)
-
-#define DDR0_17 0x11
-#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
-#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
-#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
-#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
-#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((u32)(n))&0x1)<<16)
-#define DDR0_17_DLLLOCKREG_DECODE(n) ((((u32)(n))>>16)&0x1)
-#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
-#define DDR0_17_DLL_LOCK_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_17_DLL_LOCK_DECODE(n) ((((u32)(n))>>8)&0x7F)
-
-#define DDR0_18 0x12
-#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
-#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
-#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
-#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
-#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_19 0x13
-#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
-#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
-#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
-#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
-#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_20 0x14
-#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
-#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
-#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
-#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
-#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_21 0x15
-#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
-#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((u32)(n))&0x7F)<<24)
-#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((u32)(n))>>24)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
-#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
-#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
-#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_22 0x16
-#define DDR0_22_CTRL_RAW_MASK 0x03000000
-#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000
-#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000
-#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000
-#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000
-#define DDR0_22_CTRL_RAW_ENCODE(n) ((((u32)(n))&0x3)<<24)
-#define DDR0_22_CTRL_RAW_DECODE(n) ((((u32)(n))>>24)&0x3)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((u32)(n))&0x7F)<<16)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((u32)(n))>>16)&0x7F)
-#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
-#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((u32)(n))&0x7F)<<8)
-#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((u32)(n))>>8)&0x7F)
-#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
-#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((u32)(n))&0x7F)<<0)
-#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((u32)(n))>>0)&0x7F)
-
-#define DDR0_23 0x17
-#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
-#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((u32)(n))&0x3)<<24)
-#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((u32)(n))>>24)&0x3)
-#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
-#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((u32)(n))&0xFF)<<16)
-#define DDR0_23_ECC_C_SYND_DECODE(n) ((((u32)(n))>>16)&0xFF)
-#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
-#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((u32)(n))&0xFF)<<8)
-#define DDR0_23_ECC_U_SYND_DECODE(n) ((((u32)(n))>>8)&0xFF)
-#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
-#define DDR0_23_FWC_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_23_FWC_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_24 0x18
-#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
-#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((u32)(n))&0x3)<<24)
-#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((u32)(n))>>24)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
-#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((u32)(n))&0x3)<<16)
-#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((u32)(n))>>16)&0x3)
-#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
-#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((u32)(n))&0x3)<<8)
-#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((u32)(n))>>8)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
-#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((u32)(n))&0x3)<<0)
-#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((u32)(n))>>0)&0x3)
-
-#define DDR0_25 0x19
-#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
-#define DDR0_25_VERSION_ENCODE(n) ((((u32)(n))&0xFFFF)<<16)
-#define DDR0_25_VERSION_DECODE(n) ((((u32)(n))>>16)&0xFFFF)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
-#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((u32)(n))&0x3FF)<<0)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((u32)(n))>>0)&0x3FF)
-
-#define DDR0_26 0x1A
-#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
-#define DDR0_26_TRAS_MAX_ENCODE(n) ((((u32)(n))&0xFFFF)<<16)
-#define DDR0_26_TRAS_MAX_DECODE(n) ((((u32)(n))>>16)&0xFFFF)
-#define DDR0_26_TREF_MASK 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n) ((((u32)(n))&0x3FFF)<<0)
-#define DDR0_26_TREF_DECODE(n) ((((u32)(n))>>0)&0x3FFF)
-
-#define DDR0_27 0x1B
-#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
-#define DDR0_27_EMRS_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<16)
-#define DDR0_27_EMRS_DATA_DECODE(n) ((((u32)(n))>>16)&0x3FFF)
-#define DDR0_27_TINIT_MASK 0x0000FFFF
-#define DDR0_27_TINIT_ENCODE(n) ((((u32)(n))&0xFFFF)<<0)
-#define DDR0_27_TINIT_DECODE(n) ((((u32)(n))>>0)&0xFFFF)
-
-#define DDR0_28 0x1C
-#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
-#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<16)
-#define DDR0_28_EMRS3_DATA_DECODE(n) ((((u32)(n))>>16)&0x3FFF)
-#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
-#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((u32)(n))&0x3FFF)<<0)
-#define DDR0_28_EMRS2_DATA_DECODE(n) ((((u32)(n))>>0)&0x3FFF)
-
-#define DDR0_31 0x1F
-#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
-#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((u32)(n))&0xFFFF)<<0)
-#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((u32)(n))>>0)&0xFFFF)
-
-#define DDR0_32 0x20
-#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_33 0x21
-#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_34 0x22
-#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_35 0x23
-#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_36 0x24
-#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_36_ECC_U_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_37 0x25
-#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_37_ECC_U_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_38 0x26
-#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_39 0x27
-#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_40 0x28
-#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_40_ECC_C_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_41 0x29
-#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((u32)(n))&0xFFFFFFFF)<<0)
-#define DDR0_41_ECC_C_DATA_DECODE(n) ((((u32)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_42 0x2A
-#define DDR0_42_ADDR_PINS_MASK 0x07000000
-#define DDR0_42_ADDR_PINS_ENCODE(n) ((((u32)(n))&0x7)<<24)
-#define DDR0_42_ADDR_PINS_DECODE(n) ((((u32)(n))>>24)&0x7)
-#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
-#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((u32)(n))&0xF)<<0)
-#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((u32)(n))>>0)&0xF)
-
-#define DDR0_43 0x2B
-#define DDR0_43_TWR_MASK 0x07000000
-#define DDR0_43_TWR_ENCODE(n) ((((u32)(n))&0x7)<<24)
-#define DDR0_43_TWR_DECODE(n) ((((u32)(n))>>24)&0x7)
-#define DDR0_43_APREBIT_MASK 0x000F0000
-#define DDR0_43_APREBIT_ENCODE(n) ((((u32)(n))&0xF)<<16)
-#define DDR0_43_APREBIT_DECODE(n) ((((u32)(n))>>16)&0xF)
-#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
-#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((u32)(n))&0x7)<<8)
-#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((u32)(n))>>8)&0x7)
-#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
-#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((u32)(n))&0x1)<<0)
-#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((u32)(n))>>0)&0x1)
-
-#define DDR0_44 0x2C
-#define DDR0_44_TRCD_MASK 0x000000FF
-#define DDR0_44_TRCD_ENCODE(n) ((((u32)(n))&0xFF)<<0)
-#define DDR0_44_TRCD_DECODE(n) ((((u32)(n))>>0)&0xFF)
-
-#endif /* CONFIG_SDRAM_PPC4xx_DENALI_DDR2 */
-
-#ifndef __ASSEMBLY__
-struct sdram_timing {
- u32 wrdtr;
- u32 clktr;
-};
-
-/*
- * Prototypes
- */
-void ppc4xx_ibm_ddr2_register_dump(void);
-u32 mfdcr_any(u32);
-void mtdcr_any(u32, u32);
-u32 ddr_wrdtr(u32);
-u32 ddr_clktr(u32);
-void spd_ddr_init_hang(void);
-u32 DQS_autocalibration(void);
-phys_size_t sdram_memsize(void);
-void dcbz_area(u32 start_address, u32 num_bytes);
-#endif /* __ASSEMBLY__ */
-
-#endif /* _PPC4xx_SDRAM_H_ */
diff --git a/arch/powerpc/include/asm/ppc4xx-uic.h b/arch/powerpc/include/asm/ppc4xx-uic.h
deleted file mode 100644
index 58e65c1..0000000
--- a/arch/powerpc/include/asm/ppc4xx-uic.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _PPC4xx_UIC_H_
-#define _PPC4xx_UIC_H_
-
-/*
- * Define the number of UIC's
- */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-#define UIC_MAX 4
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#define UIC_MAX 3
-#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define UIC_MAX 2
-#else
-#define UIC_MAX 1
-#endif
-
-#define IRQ_MAX (UIC_MAX * 32)
-
-/*
- * UIC register
- */
-#define UIC_SR 0x0 /* UIC status */
-#define UIC_ER 0x2 /* UIC enable */
-#define UIC_CR 0x3 /* UIC critical */
-#define UIC_PR 0x4 /* UIC polarity */
-#define UIC_TR 0x5 /* UIC triggering */
-#define UIC_MSR 0x6 /* UIC masked status */
-#define UIC_VR 0x7 /* UIC vector */
-#define UIC_VCR 0x8 /* UIC vector configuration */
-
-/*
- * On 440GX we use the UICB0 as UIC0. Its the root UIC where all other UIC's
- * are cascaded on. With this trick we can use the common UIC code for 440GX
- * too.
- */
-#if defined(CONFIG_440GX)
-#define UIC0_DCR_BASE 0x200
-#define UIC1_DCR_BASE 0xc0
-#define UIC2_DCR_BASE 0xd0
-#define UIC3_DCR_BASE 0x210
-#else
-#define UIC0_DCR_BASE 0xc0
-#define UIC1_DCR_BASE 0xd0
-#define UIC2_DCR_BASE 0xe0
-#define UIC3_DCR_BASE 0xf0
-#endif
-
-#define UIC0SR (UIC0_DCR_BASE+0x0) /* UIC0 status */
-#define UIC0ER (UIC0_DCR_BASE+0x2) /* UIC0 enable */
-#define UIC0CR (UIC0_DCR_BASE+0x3) /* UIC0 critical */
-#define UIC0PR (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
-#define UIC0TR (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
-#define UIC0MSR (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
-#define UIC0VR (UIC0_DCR_BASE+0x7) /* UIC0 vector */
-#define UIC0VCR (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
-
-#define UIC1SR (UIC1_DCR_BASE+0x0) /* UIC1 status */
-#define UIC1ER (UIC1_DCR_BASE+0x2) /* UIC1 enable */
-#define UIC1CR (UIC1_DCR_BASE+0x3) /* UIC1 critical */
-#define UIC1PR (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
-#define UIC1TR (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
-#define UIC1MSR (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
-#define UIC1VR (UIC1_DCR_BASE+0x7) /* UIC1 vector */
-#define UIC1VCR (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-
-#define UIC2SR (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
-#define UIC2ER (UIC2_DCR_BASE+0x2) /* UIC2 enable */
-#define UIC2CR (UIC2_DCR_BASE+0x3) /* UIC2 critical */
-#define UIC2PR (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
-#define UIC2TR (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
-#define UIC2MSR (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
-#define UIC2VR (UIC2_DCR_BASE+0x7) /* UIC2 vector */
-#define UIC2VCR (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
-
-#define UIC3SR (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
-#define UIC3ER (UIC3_DCR_BASE+0x2) /* UIC3 enable */
-#define UIC3CR (UIC3_DCR_BASE+0x3) /* UIC3 critical */
-#define UIC3PR (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
-#define UIC3TR (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
-#define UIC3MSR (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
-#define UIC3VR (UIC3_DCR_BASE+0x7) /* UIC3 vector */
-#define UIC3VCR (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
-
-/*
- * Now the interrupt vector definitions. They are different for most of
- * the 4xx variants, so we need some more #ifdef's here. No mask
- * definitions anymore here. For this please use the UIC_MASK macro below.
- *
- * Note: Please only define the interrupts really used in U-Boot here.
- * Those are the cascading and EMAC/MAL related interrupt.
- */
-
-#if defined(CONFIG_405EP) || defined(CONFIG_405GP)
-#define VECNUM_MAL_SERR 10
-#define VECNUM_MAL_TXEOB 11
-#define VECNUM_MAL_RXEOB 12
-#define VECNUM_MAL_TXDE 13
-#define VECNUM_MAL_RXDE 14
-#define VECNUM_ETH0 15
-#define VECNUM_ETH1_OFFS 2
-#define VECNUM_EIRQ6 29
-#endif /* defined(CONFIG_405EP) */
-
-#if defined(CONFIG_405EZ)
-#define VECNUM_USBDEV 15
-#define VECNUM_ETH0 16
-#define VECNUM_MAL_SERR 18
-#define VECNUM_MAL_TXDE 18
-#define VECNUM_MAL_RXDE 18
-#define VECNUM_MAL_TXEOB 19
-#define VECNUM_MAL_RXEOB 21
-#endif /* CONFIG_405EX */
-
-#if defined(CONFIG_405EX)
-/* UIC 0 */
-#define VECNUM_MAL_TXEOB 10
-#define VECNUM_MAL_RXEOB 11
-#define VECNUM_ETH0 24
-#define VECNUM_ETH1_OFFS 1
-#define VECNUM_UIC2NCI 28
-#define VECNUM_UIC2CI 29
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 0)
-#define VECNUM_MAL_TXDE (32 + 1)
-#define VECNUM_MAL_RXDE (32 + 2)
-#endif /* CONFIG_405EX */
-
-#if defined(CONFIG_440GP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-/* UIC 0 */
-#define VECNUM_MAL_TXEOB 10
-#define VECNUM_MAL_RXEOB 11
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 0)
-#define VECNUM_MAL_TXDE (32 + 1)
-#define VECNUM_MAL_RXDE (32 + 2)
-#define VECNUM_USBDEV (32 + 23)
-#define VECNUM_ETH0 (32 + 28)
-#define VECNUM_ETH1_OFFS 2
-#endif /* CONFIG_440GP */
-
-#if defined(CONFIG_440GX)
-/* UICB 0 (440GX only) */
-/*
- * All those defines below are off-by-one, so that the common UIC code
- * can be used. So VECNUM_UIC1CI refers to VECNUM_UIC0CI etc.
- */
-#define VECNUM_UIC1CI 0
-#define VECNUM_UIC1NCI 1
-#define VECNUM_UIC2CI 2
-#define VECNUM_UIC2NCI 3
-#define VECNUM_UIC3CI 4
-#define VECNUM_UIC3NCI 5
-
-/* UIC 0, used as UIC1 on 440GX because of UICB0 */
-#define VECNUM_MAL_TXEOB (32 + 10)
-#define VECNUM_MAL_RXEOB (32 + 11)
-
-/* UIC 1, used as UIC2 on 440GX because of UICB0 */
-#define VECNUM_MAL_SERR (64 + 0)
-#define VECNUM_MAL_TXDE (64 + 1)
-#define VECNUM_MAL_RXDE (64 + 2)
-#define VECNUM_ETH0 (64 + 28)
-#define VECNUM_ETH1_OFFS 2
-#endif /* CONFIG_440GX */
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-/* UIC 0 */
-#define VECNUM_MAL_TXEOB 10
-#define VECNUM_MAL_RXEOB 11
-#define VECNUM_USBDEV 20
-#define VECNUM_ETH0 24
-#define VECNUM_ETH1_OFFS 1
-#define VECNUM_UIC2NCI 28
-#define VECNUM_UIC2CI 29
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 0)
-#define VECNUM_MAL_TXDE (32 + 1)
-#define VECNUM_MAL_RXDE (32 + 2)
-
-/* UIC 2 */
-#define VECNUM_EIRQ2 (64 + 3)
-#endif /* CONFIG_440EPX */
-
-#if defined(CONFIG_440SP)
-/* UIC 0 */
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 1)
-#define VECNUM_MAL_TXDE (32 + 2)
-#define VECNUM_MAL_RXDE (32 + 3)
-#define VECNUM_MAL_TXEOB (32 + 6)
-#define VECNUM_MAL_RXEOB (32 + 7)
-#define VECNUM_ETH0 (32 + 28)
-#endif /* CONFIG_440SP */
-
-#if defined(CONFIG_440SPE)
-/* UIC 0 */
-#define VECNUM_UIC2NCI 10
-#define VECNUM_UIC2CI 11
-#define VECNUM_UIC3NCI 16
-#define VECNUM_UIC3CI 17
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 1)
-#define VECNUM_MAL_TXDE (32 + 2)
-#define VECNUM_MAL_RXDE (32 + 3)
-#define VECNUM_MAL_TXEOB (32 + 6)
-#define VECNUM_MAL_RXEOB (32 + 7)
-#define VECNUM_ETH0 (32 + 28)
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-/* UIC 0 */
-#define VECNUM_UIC2NCI 10
-#define VECNUM_UIC2CI 11
-#define VECNUM_UIC3NCI 16
-#define VECNUM_UIC3CI 17
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 2 */
-#define VECNUM_MAL_SERR (64 + 3)
-#define VECNUM_MAL_TXDE (64 + 4)
-#define VECNUM_MAL_RXDE (64 + 5)
-#define VECNUM_MAL_TXEOB (64 + 6)
-#define VECNUM_MAL_RXEOB (64 + 7)
-#define VECNUM_ETH0 (64 + 16)
-#define VECNUM_ETH1_OFFS 1
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_460SX)
-/* UIC 0 */
-#define VECNUM_UIC2NCI 10
-#define VECNUM_UIC2CI 11
-#define VECNUM_UIC3NCI 16
-#define VECNUM_UIC3CI 17
-#define VECNUM_ETH0 19
-#define VECNUM_ETH1_OFFS 1
-#define VECNUM_UIC1NCI 30
-#define VECNUM_UIC1CI 31
-
-/* UIC 1 */
-#define VECNUM_MAL_SERR (32 + 1)
-#define VECNUM_MAL_TXDE (32 + 2)
-#define VECNUM_MAL_RXDE (32 + 3)
-#define VECNUM_MAL_TXEOB (32 + 6)
-#define VECNUM_MAL_RXEOB (32 + 7)
-#endif /* CONFIG_460EX */
-
-#if !defined(VECNUM_ETH1_OFFS)
-#define VECNUM_ETH1_OFFS 1
-#endif
-
-/*
- * Mask definitions (used for example in 4xx_enet.c)
- */
-#define UIC_MASK(vec) (0x80000000 >> ((vec) & 0x1f))
-/* UIC_NR won't work for 440GX because of its specific UIC DCR addresses */
-#define UIC_NR(vec) ((vec) >> 5)
-
-#endif /* _PPC4xx_UIC_H_ */
diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
deleted file mode 100644
index 45ff5db..0000000
--- a/arch/powerpc/include/asm/ppc4xx.h
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0 IBM-pibs
- */
-
-#ifndef __PPC4XX_H__
-#define __PPC4XX_H__
-
-/*
- * Include SoC specific headers
- */
-#if defined(CONFIG_405EP)
-#include <asm/ppc405ep.h>
-#endif
-
-#if defined(CONFIG_405EX)
-#include <asm/ppc405ex.h>
-#endif
-
-#if defined(CONFIG_405EZ)
-#include <asm/ppc405ez.h>
-#endif
-
-#if defined(CONFIG_405GP)
-#include <asm/ppc405gp.h>
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#include <asm/ppc440ep_gr.h>
-#endif
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#include <asm/ppc440epx_grx.h>
-#endif
-
-#if defined(CONFIG_440GP)
-#include <asm/ppc440gp.h>
-#endif
-
-#if defined(CONFIG_440GX)
-#include <asm/ppc440gx.h>
-#endif
-
-#if defined(CONFIG_440SP)
-#include <asm/ppc440sp.h>
-#endif
-
-#if defined(CONFIG_440SPE)
-#include <asm/ppc440spe.h>
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#include <asm/ppc460ex_gt.h>
-#endif
-
-#if defined(CONFIG_460SX)
-#include <asm/ppc460sx.h>
-#endif
-
-/*
- * Common registers for all SoC's
- */
-/* DCR registers */
-#define PLB3A0_ACR 0x0077
-#define PLB4A0_ACR 0x0081
-#define PLB4A1_ACR 0x0089
-
-/* CPR register declarations */
-
-#define PLB4Ax_ACR_PPM_MASK 0xf0000000
-#define PLB4Ax_ACR_PPM_FIXED 0x00000000
-#define PLB4Ax_ACR_PPM_FAIR 0xd0000000
-#define PLB4Ax_ACR_HBU_MASK 0x08000000
-#define PLB4Ax_ACR_HBU_DISABLED 0x00000000
-#define PLB4Ax_ACR_HBU_ENABLED 0x08000000
-#define PLB4Ax_ACR_RDP_MASK 0x06000000
-#define PLB4Ax_ACR_RDP_DISABLED 0x00000000
-#define PLB4Ax_ACR_RDP_2DEEP 0x02000000
-#define PLB4Ax_ACR_RDP_3DEEP 0x04000000
-#define PLB4Ax_ACR_RDP_4DEEP 0x06000000
-#define PLB4Ax_ACR_WRP_MASK 0x01000000
-#define PLB4Ax_ACR_WRP_DISABLED 0x00000000
-#define PLB4Ax_ACR_WRP_2DEEP 0x01000000
-
-/*
- * External Bus Controller
- */
-/* Values for EBC0_CFGADDR register - indirect addressing of these regs */
-#define PB0CR 0x00 /* periph bank 0 config reg */
-#define PB1CR 0x01 /* periph bank 1 config reg */
-#define PB2CR 0x02 /* periph bank 2 config reg */
-#define PB3CR 0x03 /* periph bank 3 config reg */
-#define PB4CR 0x04 /* periph bank 4 config reg */
-#define PB5CR 0x05 /* periph bank 5 config reg */
-#define PB6CR 0x06 /* periph bank 6 config reg */
-#define PB7CR 0x07 /* periph bank 7 config reg */
-#define PB0AP 0x10 /* periph bank 0 access parameters */
-#define PB1AP 0x11 /* periph bank 1 access parameters */
-#define PB2AP 0x12 /* periph bank 2 access parameters */
-#define PB3AP 0x13 /* periph bank 3 access parameters */
-#define PB4AP 0x14 /* periph bank 4 access parameters */
-#define PB5AP 0x15 /* periph bank 5 access parameters */
-#define PB6AP 0x16 /* periph bank 6 access parameters */
-#define PB7AP 0x17 /* periph bank 7 access parameters */
-#define PBEAR 0x20 /* periph bus error addr reg */
-#define PBESR0 0x21 /* periph bus error status reg 0 */
-#define PBESR1 0x22 /* periph bus error status reg 1 */
-#define EBC0_CFG 0x23 /* external bus configuration reg */
-
-/*
- * GPIO macro register defines
- */
-/* todo: merge with gpio.h header */
-#define GPIO_BASE GPIO0_BASE
-
-#define GPIO0_OR (GPIO0_BASE + 0x0)
-#define GPIO0_TCR (GPIO0_BASE + 0x4)
-#define GPIO0_OSRL (GPIO0_BASE + 0x8)
-#define GPIO0_OSRH (GPIO0_BASE + 0xC)
-#define GPIO0_TSRL (GPIO0_BASE + 0x10)
-#define GPIO0_TSRH (GPIO0_BASE + 0x14)
-#define GPIO0_ODR (GPIO0_BASE + 0x18)
-#define GPIO0_IR (GPIO0_BASE + 0x1C)
-#define GPIO0_RR1 (GPIO0_BASE + 0x20)
-#define GPIO0_RR2 (GPIO0_BASE + 0x24)
-#define GPIO0_RR3 (GPIO0_BASE + 0x28)
-#define GPIO0_ISR1L (GPIO0_BASE + 0x30)
-#define GPIO0_ISR1H (GPIO0_BASE + 0x34)
-#define GPIO0_ISR2L (GPIO0_BASE + 0x38)
-#define GPIO0_ISR2H (GPIO0_BASE + 0x3C)
-#define GPIO0_ISR3L (GPIO0_BASE + 0x40)
-#define GPIO0_ISR3H (GPIO0_BASE + 0x44)
-
-#define GPIO1_OR (GPIO1_BASE + 0x0)
-#define GPIO1_TCR (GPIO1_BASE + 0x4)
-#define GPIO1_OSRL (GPIO1_BASE + 0x8)
-#define GPIO1_OSRH (GPIO1_BASE + 0xC)
-#define GPIO1_TSRL (GPIO1_BASE + 0x10)
-#define GPIO1_TSRH (GPIO1_BASE + 0x14)
-#define GPIO1_ODR (GPIO1_BASE + 0x18)
-#define GPIO1_IR (GPIO1_BASE + 0x1C)
-#define GPIO1_RR1 (GPIO1_BASE + 0x20)
-#define GPIO1_RR2 (GPIO1_BASE + 0x24)
-#define GPIO1_RR3 (GPIO1_BASE + 0x28)
-#define GPIO1_ISR1L (GPIO1_BASE + 0x30)
-#define GPIO1_ISR1H (GPIO1_BASE + 0x34)
-#define GPIO1_ISR2L (GPIO1_BASE + 0x38)
-#define GPIO1_ISR2H (GPIO1_BASE + 0x3C)
-#define GPIO1_ISR3L (GPIO1_BASE + 0x40)
-#define GPIO1_ISR3H (GPIO1_BASE + 0x44)
-
-/* General Purpose Timer (GPT) Register Offsets */
-#define GPT0_TBC 0x00000000
-#define GPT0_IM 0x00000018
-#define GPT0_ISS 0x0000001C
-#define GPT0_ISC 0x00000020
-#define GPT0_IE 0x00000024
-#define GPT0_COMP0 0x00000080
-#define GPT0_COMP1 0x00000084
-#define GPT0_COMP2 0x00000088
-#define GPT0_COMP3 0x0000008C
-#define GPT0_COMP4 0x00000090
-#define GPT0_COMP5 0x00000094
-#define GPT0_COMP6 0x00000098
-#define GPT0_MASK0 0x000000C0
-#define GPT0_MASK1 0x000000C4
-#define GPT0_MASK2 0x000000C8
-#define GPT0_MASK3 0x000000CC
-#define GPT0_MASK4 0x000000D0
-#define GPT0_MASK5 0x000000D4
-#define GPT0_MASK6 0x000000D8
-#define GPT0_DCT0 0x00000110
-#define GPT0_DCIS 0x0000011C
-
-#if defined(CONFIG_440)
-#include <asm/ppc440.h>
-#else
-#include <asm/ppc405.h>
-#endif
-
-#include <asm/ppc4xx-sdram.h>
-#include <asm/ppc4xx-ebc.h>
-#if !defined(CONFIG_XILINX_440)
-#include <asm/ppc4xx-uic.h>
-#endif
-
-/*
- * Macro for generating register field mnemonics
- */
-#define PPC_REG_BITS 32
-#define PPC_REG_VAL(bit, value) ((value) << ((PPC_REG_BITS - 1) - (bit)))
-
-/*
- * Elide casts when assembling register mnemonics
- */
-#ifndef __ASSEMBLY__
-#define static_cast(type, val) (type)(val)
-#else
-#define static_cast(type, val) (val)
-#endif
-
-/*
- * Common stuff for 4xx (405 and 440)
- */
-
-#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
-#define _START_OFFSET (EXC_OFF_SYS_RESET + 0x2000)
-
-#define RESET_VECTOR 0xfffffffc
-#define CACHELINE_MASK (CONFIG_SYS_CACHELINE_SIZE - 1) /* Address mask for
- cache line aligned data. */
-
-#define CPR0_DCR_BASE 0x0C
-#define CPR0_CFGADDR (CPR0_DCR_BASE + 0x0)
-#define CPR0_CFGDATA (CPR0_DCR_BASE + 0x1)
-
-#define SDR_DCR_BASE 0x0E
-#define SDR0_CFGADDR (SDR_DCR_BASE + 0x0)
-#define SDR0_CFGDATA (SDR_DCR_BASE + 0x1)
-
-#define SDRAM_DCR_BASE 0x10
-#define SDRAM0_CFGADDR (SDRAM_DCR_BASE + 0x0)
-#define SDRAM0_CFGDATA (SDRAM_DCR_BASE + 0x1)
-
-#define EBC_DCR_BASE 0x12
-#define EBC0_CFGADDR (EBC_DCR_BASE + 0x0)
-#define EBC0_CFGDATA (EBC_DCR_BASE + 0x1)
-
-/*
- * Macros for indirect DCR access
- */
-#define mtcpr(reg, d) \
- do { mtdcr(CPR0_CFGADDR, reg); mtdcr(CPR0_CFGDATA, d); } while (0)
-#define mfcpr(reg, d) \
- do { mtdcr(CPR0_CFGADDR, reg); d = mfdcr(CPR0_CFGDATA); } while (0)
-
-#define mtebc(reg, d) \
- do { mtdcr(EBC0_CFGADDR, reg); mtdcr(EBC0_CFGDATA, d); } while (0)
-#define mfebc(reg, d) \
- do { mtdcr(EBC0_CFGADDR, reg); d = mfdcr(EBC0_CFGDATA); } while (0)
-
-#define mtsdram(reg, d) \
- do { mtdcr(SDRAM0_CFGADDR, reg); mtdcr(SDRAM0_CFGDATA, d); } while (0)
-#define mfsdram(reg, d) \
- do { mtdcr(SDRAM0_CFGADDR, reg); d = mfdcr(SDRAM0_CFGDATA); } while (0)
-
-#define mtsdr(reg, d) \
- do { mtdcr(SDR0_CFGADDR, reg); mtdcr(SDR0_CFGDATA, d); } while (0)
-#define mfsdr(reg, d) \
- do { mtdcr(SDR0_CFGADDR, reg); d = mfdcr(SDR0_CFGDATA); } while (0)
-
-#ifndef __ASSEMBLY__
-
-typedef struct
-{
- unsigned long freqDDR;
- unsigned long freqEBC;
- unsigned long freqOPB;
- unsigned long freqPCI;
- unsigned long freqPLB;
- unsigned long freqTmrClk;
- unsigned long freqUART;
- unsigned long freqProcessor;
- unsigned long freqVCOHz;
- unsigned long freqVCOMhz; /* in MHz */
- unsigned long pciClkSync; /* PCI clock is synchronous */
- unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
- unsigned long pllExtBusDiv;
- unsigned long pllFbkDiv;
- unsigned long pllFwdDiv;
- unsigned long pllFwdDivA;
- unsigned long pllFwdDivB;
- unsigned long pllOpbDiv;
- unsigned long pllPciDiv;
- unsigned long pllPlbDiv;
-} PPC4xx_SYS_INFO;
-
-static inline u32 get_mcsr(void)
-{
- u32 val;
-
- asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
- return val;
-}
-
-static inline void set_mcsr(u32 val)
-{
- asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
-}
-
-int ppc4xx_pci_sync_clock_config(u32 async);
-
-unsigned long get_OPB_freq(void);
-unsigned long get_PCI_freq(void);
-
-typedef PPC4xx_SYS_INFO sys_info_t;
-int ppc440spe_revB(void);
-void get_sys_info(sys_info_t *);
-
-#endif /* __ASSEMBLY__ */
-
-/* for multi-cpu support */
-#define NA_OR_UNKNOWN_CPU -1
-
-#endif /* __PPC4XX_H__ */
diff --git a/arch/powerpc/include/asm/ppc4xx_config.h b/arch/powerpc/include/asm/ppc4xx_config.h
deleted file mode 100644
index f38fde5..0000000
--- a/arch/powerpc/include/asm/ppc4xx_config.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2009
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PPC4xx_CONFIG_H
-#define __PPC4xx_CONFIG_H
-
-#include <common.h>
-
-struct ppc4xx_config {
- char label[16];
- char description[64];
- u8 val[CONFIG_4xx_CONFIG_BLOCKSIZE];
-};
-
-extern struct ppc4xx_config ppc4xx_config_val[];
-extern int ppc4xx_config_count;
-
-#endif /* __PPC4xx_CONFIG_H */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 6549a09..30ac4f8 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -89,11 +89,6 @@
/* Special Purpose Registers (SPRNs)*/
-/* PPC440 Architecture is BOOK-E */
-#ifdef CONFIG_440
-#define CONFIG_BOOKE
-#endif
-
#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
#ifdef CONFIG_BOOKE
#define SPRN_CCR1 0x378 /* Core Configuration Register for 440 only */
@@ -570,12 +565,7 @@
#define SPRN_MCAR 0x23d /* Machine Check Address register */
#define MCSR_MCS 0x80000000 /* Machine Check Summary */
#define MCSR_IB 0x40000000 /* Instruction PLB Error */
-#if defined(CONFIG_440)
-#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
-#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
-#else
#define MCSR_DB 0x20000000 /* Data PLB Error */
-#endif /* defined(CONFIG_440) */
#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
@@ -764,7 +754,7 @@
#define MAS7 SPRN_MAS7
#define MAS8 SPRN_MAS8
-#if defined(CONFIG_4xx) || defined(CONFIG_44x) || defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85xx)
#define DAR_DEAR DEAR
#else
#define DAR_DEAR DAR
@@ -1369,7 +1359,7 @@
#endif
#endif /* CONFIG_MACH_SPECIFIC */
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_440)
+#if defined(CONFIG_MPC85xx)
#define EPAPR_MAGIC (0x45504150)
#else
#define EPAPR_MAGIC (0x65504150)