sh: Add SH7269 device and RSK2+SH7269 board
This is an sh2a device (max 266MHz) with FPU, video display
controller (VDC), 8 serial ports, 4 I2C channels, 3 CAN ports,
SD and on-chip USB.
The RSK2+SH7269 board uses the SH7269 processor. It is often
referred to as just rsk7269.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index fcf69ab..13919c6 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -35,6 +35,10 @@
# define SCIF_BASE SCIF4_BASE
#elif defined(CONFIG_CONS_SCIF5)
# define SCIF_BASE SCIF5_BASE
+#elif defined(CONFIG_CONS_SCIF6)
+# define SCIF_BASE SCIF6_BASE
+#elif defined(CONFIG_CONS_SCIF7)
+# define SCIF_BASE SCIF7_BASE
#else
# error "Default SCIF doesn't set....."
#endif
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index de3e102..601da43 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -199,6 +199,16 @@
# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
# endif
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SH7269)
+# define SCSPTR0 0xe8007020 /* 16 bit SCIF */
+# define SCSPTR1 0xe8007820 /* 16 bit SCIF */
+# define SCSPTR2 0xe8008020 /* 16 bit SCIF */
+# define SCSPTR3 0xe8008820 /* 16 bit SCIF */
+# define SCSPTR4 0xe8009020 /* 16 bit SCIF */
+# define SCSPTR5 0xe8009820 /* 16 bit SCIF */
+# define SCSPTR6 0xe800a020 /* 16 bit SCIF */
+# define SCSPTR7 0xe800a820 /* 16 bit SCIF */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7619)
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
# define SCSPTR1 0xf8410020 /* 16 bit SCIF */