Merge branch '2019-07-17-ti-imports'
- Bring in the first three series that we need in order to enhance the
TI AM65x series support and then later introduce J721E support.
diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi
index adcd634..39fec03 100644
--- a/arch/arm/dts/k3-am65-main.dtsi
+++ b/arch/arm/dts/k3-am65-main.dtsi
@@ -69,4 +69,78 @@
clock-frequency = <48000000>;
current-speed = <115200>;
};
+
+ main_pmx0: pinmux@11c000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x11c000 0x0 0x2e4>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_pmx1: pinmux@11c2e8 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x11c2e8 0x0 0x24>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ sdhci0: sdhci@4f80000 {
+ compatible = "ti,am654-sdhci-5.1";
+ reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+ power-domains = <&k3_pds 47>;
+ clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+ clock-names = "clk_ahb", "clk_xin";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ ti,otap-del-sel = <0x2>;
+ ti,trm-icp = <0x8>;
+ dma-coherent;
+ };
+
+ main_i2c0: i2c@2000000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2000000 0x0 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 110 1>;
+ power-domains = <&k3_pds 110>;
+ };
+
+ main_i2c1: i2c@2010000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2010000 0x0 0x100>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 111 1>;
+ power-domains = <&k3_pds 111>;
+ };
+
+ main_i2c2: i2c@2020000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2020000 0x0 0x100>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 112 1>;
+ power-domains = <&k3_pds 112>;
+ };
+
+ main_i2c3: i2c@2030000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2030000 0x0 0x100>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 113 1>;
+ power-domains = <&k3_pds 113>;
+ };
};
diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi
index 8c611d1..1fd0277 100644
--- a/arch/arm/dts/k3-am65-mcu.dtsi
+++ b/arch/arm/dts/k3-am65-mcu.dtsi
@@ -15,4 +15,15 @@
clock-frequency = <96000000>;
current-speed = <115200>;
};
+
+ mcu_i2c0: i2c@40b00000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x40b00000 0x0 0x100>;
+ interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 114 1>;
+ power-domains = <&k3_pds 114>;
+ };
};
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
index 1f591ef..1f85006 100644
--- a/arch/arm/dts/k3-am65-wakeup.dtsi
+++ b/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -34,6 +34,14 @@
};
};
+ wkup_pmx0: pinmux@4301c000 {
+ compatible = "pinctrl-single";
+ reg = <0x4301c000 0x118>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
wkup_uart0: serial@42300000 {
compatible = "ti,am654-uart";
reg = <0x42300000 0x100>;
@@ -43,4 +51,15 @@
clock-frequency = <48000000>;
current-speed = <115200>;
};
+
+ wkup_i2c0: i2c@42120000 {
+ compatible = "ti,am654-i2c", "ti,omap4-i2c";
+ reg = <0x42120000 0x100>;
+ interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 115 1>;
+ power-domains = <&k3_pds 115>;
+ };
};
diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi
index 9d1ed49..4727193 100644
--- a/arch/arm/dts/k3-am65.dtsi
+++ b/arch/arm/dts/k3-am65.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
/ {
model = "Texas Instruments K3 AM654 SoC";
@@ -22,6 +23,12 @@
serial2 = &main_uart0;
serial3 = &main_uart1;
serial4 = &main_uart2;
+ i2c0 = &wkup_i2c0;
+ i2c1 = &mcu_i2c0;
+ i2c2 = &main_i2c0;
+ i2c3 = &main_i2c1;
+ i2c4 = &main_i2c2;
+ i2c5 = &main_i2c3;
};
chosen { };
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index 844a5cd..449b1dd 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -21,51 +21,21 @@
&cbass_main{
u-boot,dm-spl;
- main_pmx0: pinmux@11c000 {
- compatible = "pinctrl-single";
- reg = <0x0 0x11c000 0x0 0x2e4>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- main_pmx1: pinmux@11c2e8 {
- compatible = "pinctrl-single";
- reg = <0x0 0x11c2e8 0x0 0x24>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
- sdhci0: sdhci@04F80000 {
- compatible = "arasan,sdhci-5.1";
- reg = <0x0 0x4F80000 0x0 0x1000>,
- <0x0 0x4F90000 0x0 0x400>;
- clocks = <&k3_clks 47 1>;
- power-domains = <&k3_pds 47>;
- max-frequency = <25000000>;
- };
-
sdhci1: sdhci@04FA0000 {
- compatible = "arasan,sdhci-5.1";
+ compatible = "ti,am654-sdhci-5.1";
reg = <0x0 0x4FA0000 0x0 0x1000>,
<0x0 0x4FB0000 0x0 0x400>;
clocks = <&k3_clks 48 1>;
power-domains = <&k3_pds 48>;
max-frequency = <25000000>;
+ ti,otap-del-sel = <0x2>;
+ ti,trm-icp = <0x8>;
};
};
&cbass_mcu {
u-boot,dm-spl;
- wkup_pmx0: pinmux@4301c000 {
- compatible = "pinctrl-single";
- reg = <0x0 0x4301c000 0x0 0x118>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
navss_mcu: navss-mcu {
compatible = "simple-bus";
@@ -252,6 +222,14 @@
u-boot,dm-spl;
};
+&wkup_pmx0 {
+ u-boot,dm-spl;
+
+ wkup_i2c0_pins_default {
+ u-boot,dm-spl;
+ };
+};
+
&main_pmx0 {
u-boot,dm-spl;
main_uart0_pins_default: main_uart0_pins_default {
@@ -276,7 +254,8 @@
AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
- AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+ AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
>;
u-boot,dm-spl;
};
@@ -336,11 +315,6 @@
&sdhci0 {
u-boot,dm-spl;
- status = "okay";
- non-removable;
- bus-width = <8>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
};
&sdhci1 {
@@ -349,6 +323,7 @@
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
sdhci-caps-mask = <0x7 0x0>;
+ ti,driver-strength-ohm = <50>;
};
&mcu_cpsw {
@@ -382,3 +357,7 @@
reg-names = "gmii-sel";
};
};
+
+&wkup_i2c0 {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts
index af6956f..e73b9aa 100644
--- a/arch/arm/dts/k3-am654-base-board.dts
+++ b/arch/arm/dts/k3-am654-base-board.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "k3-am654.dtsi"
+#include <dt-bindings/pinctrl/k3.h>
/ {
compatible = "ti,am654-evm", "ti,am654";
@@ -34,3 +35,52 @@
};
};
};
+
+&main_pmx0 {
+ main_mmc0_pins_default: main_mmc0_pins_default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+ AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+ AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+ AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+ AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+ AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+ AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+ AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+ AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+ AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+ >;
+ };
+};
+
+&wkup_pmx0 {
+ wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
+ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
+ >;
+ };
+};
+
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ bus-width = <8>;
+ non-removable;
+ ti,driver-strength-ohm = <50>;
+};
+
+&wkup_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ tca9554: gpio@38 {
+ compatible = "nxp,pca9554";
+ reg = <0x38>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index a07038b..9d9b3d5 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -96,6 +96,12 @@
u-boot,dm-spl;
};
+ clk_200mhz: dummy_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ u-boot,dm-spl;
+ };
};
&dmsc {
@@ -130,6 +136,32 @@
>;
u-boot,dm-spl;
};
+
+ wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
+ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
+ >;
+ };
+};
+
+&main_pmx0 {
+ u-boot,dm-spl;
+ main_mmc0_pins_default: main_mmc0_pins_default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+ AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+ AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+ AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+ AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+ AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+ AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+ AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+ AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+ >;
+ };
};
&memorycontroller {
@@ -137,3 +169,23 @@
pinctrl-names = "default";
pinctrl-0 = <&wkup_vtt_pins_default>;
};
+
+&sdhci0 {
+ clock-names = "clk_xin";
+ clocks = <&clk_200mhz>;
+ /delete-property/ power-domains;
+ ti,driver-strength-ohm = <50>;
+};
+
+&sdhci1 {
+ clock-names = "clk_xin";
+ clocks = <&clk_200mhz>;
+ /delete-property/ power-domains;
+ ti,driver-strength-ohm = <50>;
+};
+
+&wkup_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
+ clock-frequency = <400000>;
+};
diff --git a/arch/arm/include/asm/omap_i2c.h b/arch/arm/include/asm/omap_i2c.h
index c1695cb..a697540 100644
--- a/arch/arm/include/asm/omap_i2c.h
+++ b/arch/arm/include/asm/omap_i2c.h
@@ -3,8 +3,6 @@
#ifndef _OMAP_I2C_H
#define _OMAP_I2C_H
-#include <asm/arch/cpu.h>
-
#ifdef CONFIG_DM_I2C
/* Information about a GPIO bank */
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index 30fba20..c74641d 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -58,6 +58,33 @@
*/
/*
+ * Macro for clearing BSS during SPL execution. Usually called during the
+ * relocation process for most boards before entering board_init_r(), but
+ * can also be done early before entering board_init_f() on plaforms that
+ * can afford it due to sufficient memory being available early.
+ */
+
+.macro SPL_CLEAR_BSS
+ ldr r0, =__bss_start /* this is auto-relocated! */
+
+#ifdef CONFIG_USE_ARCH_MEMSET
+ ldr r3, =__bss_end /* this is auto-relocated! */
+ mov r1, #0x00000000 /* prepare zero to clear BSS */
+
+ subs r2, r3, r0 /* r2 = memset len */
+ bl memset
+#else
+ ldr r1, =__bss_end /* this is auto-relocated! */
+ mov r2, #0x00000000 /* prepare zero to clear BSS */
+
+clbss_l:cmp r0, r1 /* while not at end of BSS */
+ strlo r2, [r0] /* clear 32-bit BSS word */
+ addlo r0, r0, #4 /* move to next */
+ blo clbss_l
+#endif
+.endm
+
+/*
* entry point of crt0 sequence
*/
@@ -82,6 +109,10 @@
mov r9, r0
bl board_init_f_init_reserve
+#if defined(CONFIG_SPL_EARLY_BSS)
+ SPL_CLEAR_BSS
+#endif
+
mov r0, #0
bl board_init_f
@@ -119,6 +150,11 @@
bl c_runtime_cpu_setup /* we still call old routine here */
#endif
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_FRAMEWORK)
+
+#if !defined(CONFIG_SPL_EARLY_BSS)
+ SPL_CLEAR_BSS
+#endif
+
# ifdef CONFIG_SPL_BUILD
/* Use a DRAM stack for the rest of SPL, if requested */
bl spl_relocate_stack_gd
@@ -126,23 +162,6 @@
movne sp, r0
movne r9, r0
# endif
- ldr r0, =__bss_start /* this is auto-relocated! */
-
-#ifdef CONFIG_USE_ARCH_MEMSET
- ldr r3, =__bss_end /* this is auto-relocated! */
- mov r1, #0x00000000 /* prepare zero to clear BSS */
-
- subs r2, r3, r0 /* r2 = memset len */
- bl memset
-#else
- ldr r1, =__bss_end /* this is auto-relocated! */
- mov r2, #0x00000000 /* prepare zero to clear BSS */
-
-clbss_l:cmp r0, r1 /* while not at end of BSS */
- strlo r2, [r0] /* clear 32-bit BSS word */
- addlo r0, r0, #4 /* move to next */
- blo clbss_l
-#endif
#if ! defined(CONFIG_SPL_BUILD)
bl coloured_LED_init
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index e677a2e..f25f822 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -58,6 +58,45 @@
int
default 16
+config K3_LOAD_SYSFW
+ bool
+ depends on SPL
+
+config K3_SYSFW_IMAGE_NAME
+ string "File name of SYSFW firmware and configuration blob"
+ depends on K3_LOAD_SYSFW
+ default "sysfw.itb"
+ help
+ Filename of the combined System Firmware and configuration image tree
+ blob to be loaded when booting from a filesystem.
+
+config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT
+ hex "MMC sector to load SYSFW firmware and configuration blob from"
+ depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+ default 0x3600
+ help
+ Address on the MMC to load the combined System Firmware and
+ configuration image tree blob from, when the MMC is being used
+ in raw mode. Units: MMC sectors (1 sector = 512 bytes).
+
+config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
+ hex "MMC partition to load SYSFW firmware and configuration blob from"
+ depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+ default 2
+ help
+ Partition on the MMC to the combined System Firmware and configuration
+ image tree blob from, when the MMC is being used in raw mode.
+
+config K3_SYSFW_IMAGE_SIZE_MAX
+ int "Amount of memory dynamically allocated for loading SYSFW blob"
+ depends on K3_LOAD_SYSFW
+ default 269000
+ help
+ Amount of memory (in bytes) reserved through dynamic allocation at
+ runtime for loading the combined System Firmware and configuration image
+ tree blob. Keep it as tight as possible, as this directly affects the
+ overall SPL memory footprint.
+
config SYS_K3_SPL_ATF
bool "Start Cortex-A from SPL"
depends on SPL && CPU_V7R
diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
index 0c3a4f7..3af7f2e 100644
--- a/arch/arm/mach-k3/Makefile
+++ b/arch/arm/mach-k3/Makefile
@@ -7,4 +7,7 @@
obj-$(CONFIG_ARM64) += arm64-mmu.o
obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o
obj-$(CONFIG_TI_SECURE_DEVICE) += security.o
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-$(CONFIG_K3_LOAD_SYSFW) += sysfw-loader.o
+endif
obj-y += common.o
diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
index 60a5803..cb96581 100644
--- a/arch/arm/mach-k3/am6_init.c
+++ b/arch/arm/mach-k3/am6_init.c
@@ -10,8 +10,12 @@
#include <asm/io.h>
#include <spl.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/sysfw-loader.h>
+#include <asm/arch/sys_proto.h>
#include "common.h"
#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <dm/pinctrl.h>
#ifdef CONFIG_SPL_BUILD
static void mmr_unlock(u32 base, u32 partition)
@@ -63,7 +67,7 @@
void board_init_f(ulong dummy)
{
-#if defined(CONFIG_K3_AM654_DDRSS)
+#if defined(CONFIG_K3_LOAD_SYSFW) || defined(CONFIG_K3_AM654_DDRSS)
struct udevice *dev;
int ret;
#endif
@@ -83,8 +87,33 @@
/* Init DM early in-order to invoke system controller */
spl_early_init();
+#ifdef CONFIG_K3_LOAD_SYSFW
+ /*
+ * Process pinctrl for the serial0 a.k.a. WKUP_UART0 module and continue
+ * regardless of the result of pinctrl. Do this without probing the
+ * device, but instead by searching the device that would request the
+ * given sequence number if probed. The UART will be used by the system
+ * firmware (SYSFW) image for various purposes and SYSFW depends on us
+ * to initialize its pin settings.
+ */
+ ret = uclass_find_device_by_seq(UCLASS_SERIAL, 0, true, &dev);
+ if (!ret)
+ pinctrl_select_state(dev, "default");
+
+ /*
+ * Load, start up, and configure system controller firmware. Provide
+ * the U-Boot console init function to the SYSFW post-PM configuration
+ * callback hook, effectively switching on (or over) the console
+ * output.
+ */
+ k3_sysfw_loader(preloader_console_init);
+#else
/* Prepare console output */
preloader_console_init();
+#endif
+
+ /* Perform EEPROM-based board detection */
+ do_board_detect();
#ifdef CONFIG_K3_AM654_DDRSS
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
diff --git a/arch/arm/mach-k3/include/mach/am6_hardware.h b/arch/arm/mach-k3/include/mach/am6_hardware.h
index 3343233..6df7631 100644
--- a/arch/arm/mach-k3/include/mach/am6_hardware.h
+++ b/arch/arm/mach-k3/include/mach/am6_hardware.h
@@ -44,4 +44,7 @@
#define CTRLMMR_LOCK_KICK1 0x0100c
#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a
+/* MCU SCRATCHPAD usage */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
+
#endif /* __ASM_ARCH_AM6_HARDWARE_H */
diff --git a/arch/arm/mach-k3/include/mach/sys_proto.h b/arch/arm/mach-k3/include/mach/sys_proto.h
index 018725b..787a274 100644
--- a/arch/arm/mach-k3/include/mach/sys_proto.h
+++ b/arch/arm/mach-k3/include/mach/sys_proto.h
@@ -12,4 +12,6 @@
u32 bound);
struct ti_sci_handle *get_ti_sci_handle(void);
int fdt_fixup_msmc_ram(void *blob, char *parent_path, char *node_name);
+int do_board_detect(void);
+
#endif
diff --git a/arch/arm/mach-k3/include/mach/sysfw-loader.h b/arch/arm/mach-k3/include/mach/sysfw-loader.h
new file mode 100644
index 0000000..36eb265
--- /dev/null
+++ b/arch/arm/mach-k3/include/mach/sysfw-loader.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Andreas Dannenberg <dannenberg@ti.com>
+ */
+
+#ifndef _SYSFW_LOADER_H_
+#define _SYSFW_LOADER_H_
+
+void k3_sysfw_loader(void (*config_pm_done_callback)(void));
+
+#endif
diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c
new file mode 100644
index 0000000..2ede820
--- /dev/null
+++ b/arch/arm/mach-k3/sysfw-loader.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * K3: System Firmware Loader
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Andreas Dannenberg <dannenberg@ti.com>
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <malloc.h>
+#include <remoteproc.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <asm/arch/sys_proto.h>
+
+/* Name of the FIT image nodes for SYSFW and its config data */
+#define SYSFW_FIRMWARE "sysfw.bin"
+#define SYSFW_CFG_BOARD "board-cfg.bin"
+#define SYSFW_CFG_PM "pm-cfg.bin"
+#define SYSFW_CFG_RM "rm-cfg.bin"
+#define SYSFW_CFG_SEC "sec-cfg.bin"
+
+static bool sysfw_loaded;
+static void *sysfw_load_address;
+
+/*
+ * Populate SPL hook to override the default load address used by the SPL
+ * loader function with a custom address for SYSFW loading.
+ */
+struct image_header *spl_get_load_buffer(ssize_t offset, size_t size)
+{
+ if (sysfw_loaded)
+ return (struct image_header *)(CONFIG_SYS_TEXT_BASE + offset);
+ else if (sysfw_load_address)
+ return sysfw_load_address;
+ else
+ panic("SYSFW load address not defined!");
+}
+
+/*
+ * Populate SPL hook to skip the default SPL loader FIT post-processing steps
+ * during SYSFW loading and return to the calling function so we can perform
+ * our own custom processing.
+ */
+bool spl_load_simple_fit_skip_processing(void)
+{
+ return !sysfw_loaded;
+}
+
+static int fit_get_data_by_name(const void *fit, int images, const char *name,
+ const void **addr, size_t *size)
+{
+ int node_offset;
+
+ node_offset = fdt_subnode_offset(fit, images, name);
+ if (node_offset < 0)
+ return -ENOENT;
+
+ return fit_image_get_data(fit, node_offset, addr, size);
+}
+
+static void k3_sysfw_load_using_fit(void *fit)
+{
+ int images;
+ const void *sysfw_addr;
+ size_t sysfw_size;
+ int ret;
+
+ /* Find the node holding the images information */
+ images = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (images < 0)
+ panic("Cannot find /images node (%d)\n", images);
+
+ /* Extract System Firmware (SYSFW) image from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_FIRMWARE,
+ &sysfw_addr, &sysfw_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_FIRMWARE,
+ ret);
+
+ /*
+ * Start up system controller firmware
+ *
+ * It is assumed that remoteproc device 0 is the corresponding
+ * system-controller that runs SYSFW. Make sure DT reflects the same.
+ */
+ ret = rproc_dev_init(0);
+ if (ret)
+ panic("rproc failed to be initialized (%d)\n", ret);
+
+ ret = rproc_load(0, (ulong)sysfw_addr, (ulong)sysfw_size);
+ if (ret)
+ panic("Firmware failed to start on rproc (%d)\n", ret);
+
+ ret = rproc_start(0);
+ if (ret)
+ panic("Firmware init failed on rproc (%d)\n", ret);
+}
+
+static void k3_sysfw_configure_using_fit(void *fit,
+ struct ti_sci_handle *ti_sci)
+{
+ struct ti_sci_board_ops *board_ops = &ti_sci->ops.board_ops;
+ int images;
+ const void *cfg_fragment_addr;
+ size_t cfg_fragment_size;
+ int ret;
+
+ /* Find the node holding the images information */
+ images = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (images < 0)
+ panic("Cannot find /images node (%d)\n", images);
+
+ /* Extract board configuration from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_CFG_BOARD,
+ &cfg_fragment_addr, &cfg_fragment_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_BOARD,
+ ret);
+
+ /* Apply board configuration to SYSFW */
+ ret = board_ops->board_config(ti_sci,
+ (u64)(u32)cfg_fragment_addr,
+ (u32)cfg_fragment_size);
+ if (ret)
+ panic("Failed to set board configuration (%d)\n", ret);
+
+ /* Extract power/clock (PM) specific configuration from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_CFG_PM,
+ &cfg_fragment_addr, &cfg_fragment_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_PM,
+ ret);
+
+ /* Apply power/clock (PM) specific configuration to SYSFW */
+ ret = board_ops->board_config_pm(ti_sci,
+ (u64)(u32)cfg_fragment_addr,
+ (u32)cfg_fragment_size);
+ if (ret)
+ panic("Failed to set board PM configuration (%d)\n", ret);
+
+ /* Extract resource management (RM) specific configuration from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_CFG_RM,
+ &cfg_fragment_addr, &cfg_fragment_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_RM,
+ ret);
+
+ /* Apply resource management (RM) configuration to SYSFW */
+ ret = board_ops->board_config_rm(ti_sci,
+ (u64)(u32)cfg_fragment_addr,
+ (u32)cfg_fragment_size);
+ if (ret)
+ panic("Failed to set board RM configuration (%d)\n", ret);
+
+ /* Extract security specific configuration from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_CFG_SEC,
+ &cfg_fragment_addr, &cfg_fragment_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_SEC,
+ ret);
+
+ /* Apply security configuration to SYSFW */
+ ret = board_ops->board_config_security(ti_sci,
+ (u64)(u32)cfg_fragment_addr,
+ (u32)cfg_fragment_size);
+ if (ret)
+ panic("Failed to set board security configuration (%d)\n",
+ ret);
+}
+
+void k3_sysfw_loader(void (*config_pm_done_callback)(void))
+{
+ struct spl_image_info spl_image = { 0 };
+ struct spl_boot_device bootdev = { 0 };
+ struct ti_sci_handle *ti_sci;
+ int ret;
+
+ /* Reserve a block of aligned memory for loading the SYSFW image */
+ sysfw_load_address = memalign(ARCH_DMA_MINALIGN,
+ CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
+ if (!sysfw_load_address)
+ panic("Error allocating %u bytes of memory for SYSFW image\n",
+ CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
+
+ debug("%s: allocated %u bytes at 0x%p\n", __func__,
+ CONFIG_K3_SYSFW_IMAGE_SIZE_MAX, sysfw_load_address);
+
+ /* Set load address for legacy modes that bypass spl_get_load_buffer */
+ spl_image.load_addr = (uintptr_t)sysfw_load_address;
+
+ bootdev.boot_device = spl_boot_device();
+
+ /* Load combined System Controller firmware and config data image */
+ switch (bootdev.boot_device) {
+#if CONFIG_IS_ENABLED(MMC_SUPPORT)
+ case BOOT_DEVICE_MMC1:
+ case BOOT_DEVICE_MMC2:
+ case BOOT_DEVICE_MMC2_2:
+ ret = spl_mmc_load(&spl_image, &bootdev,
+#ifdef CONFIG_K3_SYSFW_IMAGE_NAME
+ CONFIG_K3_SYSFW_IMAGE_NAME,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
+ CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART,
+#else
+ 0,
+#endif
+#ifdef CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT
+ CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT);
+#else
+ 0);
+#endif
+ break;
+#endif
+ default:
+ panic("Loading SYSFW image from device %u not supported!\n",
+ bootdev.boot_device);
+ }
+
+ if (ret)
+ panic("Error %d occurred during loading SYSFW image!\n", ret);
+
+ /*
+ * Now that SYSFW got loaded set helper flag to restore regular SPL
+ * loader behavior so we can later boot into the next stage as expected.
+ */
+ sysfw_loaded = true;
+
+ /* Ensure the SYSFW image is in FIT format */
+ if (image_get_magic((const image_header_t *)sysfw_load_address) !=
+ FDT_MAGIC)
+ panic("SYSFW image not in FIT format!\n");
+
+ /* Extract and start SYSFW */
+ k3_sysfw_load_using_fit(sysfw_load_address);
+
+ /* Get handle for accessing SYSFW services */
+ ti_sci = get_ti_sci_handle();
+
+ /* Parse and apply the different SYSFW configuration fragments */
+ k3_sysfw_configure_using_fit(sysfw_load_address, ti_sci);
+
+ /*
+ * Now that all clocks and PM aspects are setup, invoke a user-
+ * provided callback function. Usually this callback would be used
+ * to setup or re-configure the U-Boot console UART.
+ */
+ if (config_pm_done_callback)
+ config_pm_done_callback();
+
+ /* Output System Firmware version info */
+ printf("SYSFW ABI: %d.%d (firmware rev 0x%04x '%.*s')\n",
+ ti_sci->version.abi_major, ti_sci->version.abi_minor,
+ ti_sci->version.firmware_revision,
+ sizeof(ti_sci->version.firmware_description),
+ ti_sci->version.firmware_description);
+}
diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig
index 98172c2..47b41cd 100644
--- a/board/ti/am65x/Kconfig
+++ b/board/ti/am65x/Kconfig
@@ -12,14 +12,18 @@
select ARM64
select SOC_K3_AM6
select SYS_DISABLE_DCACHE_OPS
+ select BOARD_LATE_INIT
+ imply TI_I2C_BOARD_DETECT
config TARGET_AM654_R5_EVM
bool "TI K3 based AM654 EVM running on R5"
select CPU_V7R
select SYS_THUMB_BUILD
select SOC_K3_AM6
+ select K3_LOAD_SYSFW
select K3_AM654_DDRSS
imply SYS_K3_SPL_ATF
+ imply TI_I2C_BOARD_DETECT
endchoice
@@ -34,6 +38,8 @@
config SYS_CONFIG_NAME
default "am65x_evm"
+source "board/ti/common/Kconfig"
+
endif
if TARGET_AM654_R5_EVM
@@ -50,4 +56,6 @@
config SPL_LDSCRIPT
default "arch/arm/mach-omap2/u-boot-spl.lds"
+source "board/ti/common/Kconfig"
+
endif
diff --git a/board/ti/am65x/README b/board/ti/am65x/README
index 0b82bd5..16384e0 100644
--- a/board/ti/am65x/README
+++ b/board/ti/am65x/README
@@ -209,3 +209,55 @@
| | Secure config | |
| +-------------------+ |
+-----------------------+
+
+eMMC:
+-----
+ROM supports booting from eMMC from boot0 partition offset 0x0
+
+Flashing images to eMMC:
+
+The following commands can be used to download tiboot3.bin, tispl.bin,
+u-boot.img, and sysfw.itb from an SD card and write them to the eMMC boot0
+partition at respective addresses.
+
+=> mmc dev 0 1
+=> fatload mmc 1 ${loadaddr} tiboot3.bin
+=> mmc write ${loadaddr} 0x0 0x400
+=> fatload mmc 1 ${loadaddr} tispl.bin
+=> mmc write ${loadaddr} 0x400 0x1000
+=> fatload mmc 1 ${loadaddr} u-boot.img
+=> mmc write ${loadaddr} 0x1400 0x2000
+=> fatload mmc 1 ${loadaddr} sysfw.itb
+=> mmc write ${loadaddr} 0x3600 0x800
+
+To give the ROM access to the boot partition, the following commands must be
+used for the first time:
+=> mmc partconf 0 1 1 1
+=> mmc bootbus 0 1 0 0
+
+To create a software partition for the rootfs, the following command can be
+used:
+=> gpt write mmc 0 ${partitions}
+
+eMMC layout:
+
+ boot0 partition (8 MB) user partition
+ 0x0+----------------------------------+ 0x0+-------------------------+
+ | tiboot3.bin (512 KB) | | |
+ 0x400+----------------------------------+ | |
+ | tispl.bin (2 MB) | | |
+0x1400+----------------------------------+ | rootfs |
+ | u-boot.img (4 MB) | | |
+0x3400+----------------------------------+ | |
+ | environment (128 KB) | | |
+0x3500+----------------------------------+ | |
+ | backup environment (128 KB) | | |
+0x3600+----------------------------------+ | |
+ | sysfw (1 MB) | | |
+0x3E00+----------------------------------+ +-------------------------+
+
+Kernel image and DT are expected to be present in the /boot folder of rootfs.
+To boot kernel from eMMC, use the following commands:
+=> setenv mmcdev 0
+=> setenv bootpart 0
+=> boot
diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c
index 52f5d6b..7bd8c4f 100644
--- a/board/ti/am65x/evm.c
+++ b/board/ti/am65x/evm.c
@@ -8,10 +8,31 @@
*/
#include <common.h>
+#include <dm.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
#include <asm/io.h>
+#include <asm/omap_common.h>
#include <spl.h>
#include <asm/arch/sys_proto.h>
+#include "../common/board_detect.h"
+
+#define board_is_am65x_base_board() board_ti_is("AM6-COMPROCEVM")
+
+/* Daughter card presence detection signals */
+enum {
+ AM65X_EVM_APP_BRD_DET,
+ AM65X_EVM_LCD_BRD_DET,
+ AM65X_EVM_SERDES_BRD_DET,
+ AM65X_EVM_HDMI_GPMC_BRD_DET,
+ AM65X_EVM_BRD_DET_COUNT,
+};
+
+/* Max number of MAC addresses that are parsed/processed per daughter card */
+#define DAUGHTER_CARD_NO_OF_MAC_ADDR 8
+
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
@@ -80,3 +101,223 @@
return ret;
}
#endif
+
+int do_board_detect(void)
+{
+ int ret;
+
+ ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
+ CONFIG_EEPROM_CHIP_ADDRESS);
+ if (ret)
+ pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
+ CONFIG_EEPROM_CHIP_ADDRESS, ret);
+
+ return ret;
+}
+
+static void setup_board_eeprom_env(void)
+{
+ char *name = "am65x";
+
+ if (do_board_detect())
+ goto invalid_eeprom;
+
+ if (board_is_am65x_base_board())
+ name = "am65x";
+ else
+ printf("Unidentified board claims %s in eeprom header\n",
+ board_ti_get_name());
+
+invalid_eeprom:
+ set_board_info_env_am6(name);
+}
+
+static int init_daughtercard_det_gpio(char *gpio_name, struct gpio_desc *desc)
+{
+ int ret;
+
+ memset(desc, 0, sizeof(*desc));
+
+ ret = dm_gpio_lookup_name(gpio_name, desc);
+ if (ret < 0)
+ return ret;
+
+ /* Request GPIO, simply re-using the name as label */
+ ret = dm_gpio_request(desc, gpio_name);
+ if (ret < 0)
+ return ret;
+
+ return dm_gpio_set_dir_flags(desc, GPIOD_IS_IN);
+}
+
+static int probe_daughtercards(void)
+{
+ struct ti_am6_eeprom ep;
+ struct gpio_desc board_det_gpios[AM65X_EVM_BRD_DET_COUNT];
+ char mac_addr[DAUGHTER_CARD_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
+ u8 mac_addr_cnt;
+ char name_overlays[1024] = { 0 };
+ int i, j;
+ int ret;
+
+ /*
+ * Daughter card presence detection signal name to GPIO (via I2C I/O
+ * expander @ address 0x38) name and EEPROM I2C address mapping.
+ */
+ const struct {
+ char *gpio_name;
+ u8 i2c_addr;
+ } slot_map[AM65X_EVM_BRD_DET_COUNT] = {
+ { "gpio@38_0", 0x52, }, /* AM65X_EVM_APP_BRD_DET */
+ { "gpio@38_1", 0x55, }, /* AM65X_EVM_LCD_BRD_DET */
+ { "gpio@38_2", 0x54, }, /* AM65X_EVM_SERDES_BRD_DET */
+ { "gpio@38_3", 0x53, }, /* AM65X_EVM_HDMI_GPMC_BRD_DET */
+ };
+
+ /* Declaration of daughtercards to probe */
+ const struct {
+ u8 slot_index; /* Slot the card is installed */
+ char *card_name; /* EEPROM-programmed card name */
+ char *dtbo_name; /* Device tree overlay to apply */
+ u8 eth_offset; /* ethXaddr MAC address index offset */
+ } cards[] = {
+ {
+ AM65X_EVM_APP_BRD_DET,
+ "AM6-GPAPPEVM",
+ "k3-am654-gp.dtbo",
+ 0,
+ },
+ {
+ AM65X_EVM_APP_BRD_DET,
+ "AM6-IDKAPPEVM",
+ "k3-am654-idk.dtbo",
+ 3,
+ },
+ {
+ AM65X_EVM_SERDES_BRD_DET,
+ "SER-PCIE2LEVM",
+ "k3-am654-pcie-usb2.dtbo",
+ 0,
+ },
+ {
+ AM65X_EVM_SERDES_BRD_DET,
+ "SER-PCIEUSBEVM",
+ "k3-am654-pcie-usb3.dtbo",
+ 0,
+ },
+ {
+ AM65X_EVM_LCD_BRD_DET,
+ "OLDI-LCD1EVM",
+ "k3-am654-evm-oldi-lcd1evm.dtbo",
+ 0,
+ },
+ };
+
+ /*
+ * Initialize GPIO used for daughtercard slot presence detection and
+ * keep the resulting handles in local array for easier access.
+ */
+ for (i = 0; i < AM65X_EVM_BRD_DET_COUNT; i++) {
+ ret = init_daughtercard_det_gpio(slot_map[i].gpio_name,
+ &board_det_gpios[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cards); i++) {
+ /* Obtain card-specific slot index and associated I2C address */
+ u8 slot_index = cards[i].slot_index;
+ u8 i2c_addr = slot_map[slot_index].i2c_addr;
+
+ /*
+ * The presence detection signal is active-low, hence skip
+ * over this card slot if anything other than 0 is returned.
+ */
+ ret = dm_gpio_get_value(&board_det_gpios[slot_index]);
+ if (ret < 0)
+ return ret;
+ else if (ret)
+ continue;
+
+ /* Get and parse the daughter card EEPROM record */
+ ret = ti_i2c_eeprom_am6_get(CONFIG_EEPROM_BUS_ADDRESS, i2c_addr,
+ &ep,
+ (char **)mac_addr,
+ DAUGHTER_CARD_NO_OF_MAC_ADDR,
+ &mac_addr_cnt);
+ if (ret) {
+ pr_err("Reading daughtercard EEPROM at 0x%02x failed %d\n",
+ i2c_addr, ret);
+ /*
+ * Even this is pretty serious let's just skip over
+ * this particular daughtercard, rather than ending
+ * the probing process altogether.
+ */
+ continue;
+ }
+
+ /* Only process the parsed data if we found a match */
+ if (strncmp(ep.name, cards[i].card_name, sizeof(ep.name)))
+ continue;
+
+ printf("detected %s\n", cards[i].card_name);
+
+ /*
+ * Populate any MAC addresses from daughtercard into the U-Boot
+ * environment, starting with a card-specific offset so we can
+ * have multiple cards contribute to the MAC pool in a well-
+ * defined manner.
+ */
+ for (j = 0; j < mac_addr_cnt; j++) {
+ if (!is_valid_ethaddr((u8 *)mac_addr[j]))
+ continue;
+
+ eth_env_set_enetaddr_by_index("eth",
+ cards[i].eth_offset + j,
+ (uchar *)mac_addr[j]);
+ }
+
+ /* Skip if no overlays are to be added */
+ if (!strlen(cards[i].dtbo_name))
+ continue;
+
+ /*
+ * Make sure we are not running out of buffer space by checking
+ * if we can fit the new overlay, a trailing space to be used
+ * as a separator, plus the terminating zero.
+ */
+ if (strlen(name_overlays) + strlen(cards[i].dtbo_name) + 2 >
+ sizeof(name_overlays))
+ return -ENOMEM;
+
+ /* Append to our list of overlays */
+ strcat(name_overlays, cards[i].dtbo_name);
+ strcat(name_overlays, " ");
+ }
+
+ /* Apply device tree overlay(s) to the U-Boot environment, if any */
+ if (strlen(name_overlays))
+ return env_set("name_overlays", name_overlays);
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
+
+ setup_board_eeprom_env();
+
+ /*
+ * The first MAC address for ethernet a.k.a. ethernet0 comes from
+ * efuse populated via the am654 gigabit eth switch subsystem driver.
+ * All the other ones are populated via EEPROM, hence continue with
+ * an index of 1.
+ */
+ board_ti_am6_set_ethaddr(1, ep->mac_addr_cnt);
+
+ /* Check for and probe any plugged-in daughtercards */
+ probe_daughtercards();
+
+ return 0;
+}
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index e258e22..32fa105 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <asm/arch/hardware.h>
#include <asm/omap_common.h>
#include <dm/uclass.h>
#include <i2c.h>
@@ -284,6 +285,191 @@
return 0;
}
+static int ti_i2c_eeprom_am6_parse_record(struct ti_am6_eeprom_record *record,
+ struct ti_am6_eeprom *ep,
+ char **mac_addr,
+ u8 mac_addr_max_cnt,
+ u8 *mac_addr_cnt)
+{
+ switch (record->header.id) {
+ case TI_AM6_EEPROM_RECORD_BOARD_INFO:
+ if (record->header.len != sizeof(record->data.board_info))
+ return -EINVAL;
+
+ if (!ep)
+ break;
+
+ /* Populate (and clean, if needed) the board name */
+ strlcpy(ep->name, record->data.board_info.name,
+ sizeof(ep->name));
+ ti_eeprom_string_cleanup(ep->name);
+
+ /* Populate selected other fields from the board info record */
+ strlcpy(ep->version, record->data.board_info.version,
+ sizeof(ep->version));
+ strlcpy(ep->software_revision,
+ record->data.board_info.software_revision,
+ sizeof(ep->software_revision));
+ strlcpy(ep->serial, record->data.board_info.serial,
+ sizeof(ep->serial));
+ break;
+ case TI_AM6_EEPROM_RECORD_MAC_INFO:
+ if (record->header.len != sizeof(record->data.mac_info))
+ return -EINVAL;
+
+ if (!mac_addr || !mac_addr_max_cnt)
+ break;
+
+ *mac_addr_cnt = ((record->data.mac_info.mac_control &
+ TI_AM6_EEPROM_MAC_ADDR_COUNT_MASK) >>
+ TI_AM6_EEPROM_MAC_ADDR_COUNT_SHIFT) + 1;
+
+ /*
+ * The EEPROM can (but may not) hold a very large amount
+ * of MAC addresses, by far exceeding what we want/can store
+ * in the common memory array, so only grab what we can fit.
+ * Note that a value of 0 means 1 MAC address, and so on.
+ */
+ *mac_addr_cnt = min(*mac_addr_cnt, mac_addr_max_cnt);
+
+ memcpy(mac_addr, record->data.mac_info.mac_addr,
+ *mac_addr_cnt * TI_EEPROM_HDR_ETH_ALEN);
+ break;
+ case 0x00:
+ /* Illegal value... Fall through... */
+ case 0xFF:
+ /* Illegal value... Something went horribly wrong... */
+ return -EINVAL;
+ default:
+ pr_warn("%s: Ignoring record id %u\n", __func__,
+ record->header.id);
+ }
+
+ return 0;
+}
+
+int __maybe_unused ti_i2c_eeprom_am6_get(int bus_addr, int dev_addr,
+ struct ti_am6_eeprom *ep,
+ char **mac_addr,
+ u8 mac_addr_max_cnt,
+ u8 *mac_addr_cnt)
+{
+ struct udevice *dev;
+ struct udevice *bus;
+ unsigned int eeprom_addr;
+ struct ti_am6_eeprom_record_board_id board_id;
+ struct ti_am6_eeprom_record record;
+ int rc;
+
+ /* Initialize with a known bad marker for i2c fails.. */
+ memset(ep, 0, sizeof(*ep));
+ ep->header = TI_DEAD_EEPROM_MAGIC;
+
+ /* Read the board ID record which is always the first EEPROM record */
+ rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
+ sizeof(board_id), (uint8_t *)&board_id);
+ if (rc)
+ return rc;
+
+ if (board_id.header.id != TI_AM6_EEPROM_RECORD_BOARD_ID) {
+ pr_err("%s: Invalid board ID record!\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Establish DM handle to board config EEPROM */
+ rc = uclass_get_device_by_seq(UCLASS_I2C, bus_addr, &bus);
+ if (rc)
+ return rc;
+ rc = i2c_get_chip(bus, dev_addr, 1, &dev);
+ if (rc)
+ return rc;
+
+ ep->header = TI_EEPROM_HEADER_MAGIC;
+
+ /* Ready to parse TLV structure. Initialize variables... */
+ *mac_addr_cnt = 0;
+
+ /*
+ * After the all-encompassing board ID record all other records follow
+ * a TLV-type scheme. Point to the first such record and then start
+ * parsing those one by one.
+ */
+ eeprom_addr = sizeof(board_id);
+
+ while (true) {
+ rc = dm_i2c_read(dev, eeprom_addr, (uint8_t *)&record.header,
+ sizeof(record.header));
+ if (rc)
+ return rc;
+
+ /*
+ * Check for end of list marker. If we reached it don't go
+ * any further and stop parsing right here.
+ */
+ if (record.header.id == TI_AM6_EEPROM_RECORD_END_LIST)
+ break;
+
+ eeprom_addr += sizeof(record.header);
+
+ debug("%s: dev_addr=0x%02x header.id=%u header.len=%u\n",
+ __func__, dev_addr, record.header.id,
+ record.header.len);
+
+ /* Read record into memory if it fits */
+ if (record.header.len <= sizeof(record.data)) {
+ rc = dm_i2c_read(dev, eeprom_addr,
+ (uint8_t *)&record.data,
+ record.header.len);
+ if (rc)
+ return rc;
+
+ /* Process record */
+ rc = ti_i2c_eeprom_am6_parse_record(&record, ep,
+ mac_addr,
+ mac_addr_max_cnt,
+ mac_addr_cnt);
+ if (rc) {
+ pr_err("%s: EEPROM parsing error!\n", __func__);
+ return rc;
+ }
+ } else {
+ /*
+ * We may get here in case of larger records which
+ * are not yet understood.
+ */
+ pr_err("%s: Ignoring record id %u\n", __func__,
+ record.header.id);
+ }
+
+ eeprom_addr += record.header.len;
+ }
+
+ return 0;
+}
+
+int __maybe_unused ti_i2c_eeprom_am6_get_base(int bus_addr, int dev_addr)
+{
+ struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
+ int ret;
+
+ /*
+ * Always execute EEPROM read by not allowing to bypass it during the
+ * first invocation of SPL which happens on the R5 core.
+ */
+#if !(defined(CONFIG_SPL_BUILD) && defined(CONFIG_CPU_V7R))
+ if (ep->header == TI_EEPROM_HEADER_MAGIC) {
+ debug("%s: EEPROM has already been read\n", __func__);
+ return 0;
+ }
+#endif
+
+ ret = ti_i2c_eeprom_am6_get(bus_addr, dev_addr, ep,
+ (char **)ep->mac_addr,
+ AM6_EEPROM_HDR_NO_OF_MAC_ADDR,
+ &ep->mac_addr_cnt);
+ return ret;
+}
+
bool __maybe_unused board_ti_is(char *name_tag)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
@@ -348,6 +534,25 @@
memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
}
+void __maybe_unused
+board_ti_am6_get_eth_mac_addr(int index,
+ u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
+{
+ struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
+
+ if (ep->header == TI_DEAD_EEPROM_MAGIC)
+ goto fail;
+
+ if (index < 0 || index >= ep->mac_addr_cnt)
+ goto fail;
+
+ memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
+ return;
+
+fail:
+ memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
+}
+
u64 __maybe_unused board_ti_get_emif1_size(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
@@ -391,6 +596,34 @@
env_set("board_serial", unknown);
}
+void __maybe_unused set_board_info_env_am6(char *name)
+{
+ char *unknown = "unknown";
+ struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
+
+ if (name)
+ env_set("board_name", name);
+ else if (ep->name)
+ env_set("board_name", ep->name);
+ else
+ env_set("board_name", unknown);
+
+ if (ep->version)
+ env_set("board_rev", ep->version);
+ else
+ env_set("board_rev", unknown);
+
+ if (ep->software_revision)
+ env_set("board_software_revision", ep->software_revision);
+ else
+ env_set("board_software_revision", unknown);
+
+ if (ep->serial)
+ env_set("board_serial", ep->serial);
+ else
+ env_set("board_serial", unknown);
+}
+
static u64 mac_to_u64(u8 mac[6])
{
int i;
@@ -453,6 +686,19 @@
}
}
+void board_ti_am6_set_ethaddr(int index, int count)
+{
+ u8 mac_addr[6];
+ int i;
+
+ for (i = 0; i < count; i++) {
+ board_ti_am6_get_eth_mac_addr(i, mac_addr);
+ if (is_valid_ethaddr(mac_addr))
+ eth_env_set_enetaddr_by_index("eth", i + index,
+ mac_addr);
+ }
+}
+
bool __maybe_unused board_ti_was_eeprom_read(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
diff --git a/board/ti/common/board_detect.h b/board/ti/common/board_detect.h
index f8495a7..a45d896 100644
--- a/board/ti/common/board_detect.h
+++ b/board/ti/common/board_detect.h
@@ -43,6 +43,133 @@
char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
} __attribute__ ((__packed__));
+/* AM6x TI EVM EEPROM Definitions */
+#define TI_AM6_EEPROM_RECORD_BOARD_ID 0x01
+#define TI_AM6_EEPROM_RECORD_BOARD_INFO 0x10
+#define TI_AM6_EEPROM_RECORD_DDR_INFO 0x11
+#define TI_AM6_EEPROM_RECORD_DDR_SPD 0x12
+#define TI_AM6_EEPROM_RECORD_MAC_INFO 0x13
+#define TI_AM6_EEPROM_RECORD_END_LIST 0xFE
+
+/*
+ * Common header for AM6x TI EVM EEPROM records. Used to encapsulate the config
+ * EEPROM in its entirety as well as for individual records contained within.
+ */
+struct ti_am6_eeprom_record_header {
+ u8 id;
+ u16 len;
+} __attribute__ ((__packed__));
+
+/* AM6x TI EVM EEPROM board ID structure */
+struct ti_am6_eeprom_record_board_id {
+ u32 magic_number;
+ struct ti_am6_eeprom_record_header header;
+} __attribute__ ((__packed__));
+
+/* AM6x TI EVM EEPROM board info structure */
+#define AM6_EEPROM_HDR_NAME_LEN 16
+#define AM6_EEPROM_HDR_VERSION_LEN 2
+#define AM6_EEPROM_HDR_PROC_NR_LEN 4
+#define AM6_EEPROM_HDR_VARIANT_LEN 2
+#define AM6_EEPROM_HDR_PCB_REV_LEN 2
+#define AM6_EEPROM_HDR_SCH_BOM_REV_LEN 2
+#define AM6_EEPROM_HDR_SW_REV_LEN 2
+#define AM6_EEPROM_HDR_VID_LEN 2
+#define AM6_EEPROM_HDR_BLD_WK_LEN 2
+#define AM6_EEPROM_HDR_BLD_YR_LEN 2
+#define AM6_EEPROM_HDR_4P_NR_LEN 6
+#define AM6_EEPROM_HDR_SERIAL_LEN 4
+
+struct ti_am6_eeprom_record_board_info {
+ char name[AM6_EEPROM_HDR_NAME_LEN];
+ char version[AM6_EEPROM_HDR_VERSION_LEN];
+ char proc_number[AM6_EEPROM_HDR_PROC_NR_LEN];
+ char variant[AM6_EEPROM_HDR_VARIANT_LEN];
+ char pcb_revision[AM6_EEPROM_HDR_PCB_REV_LEN];
+ char schematic_bom_revision[AM6_EEPROM_HDR_SCH_BOM_REV_LEN];
+ char software_revision[AM6_EEPROM_HDR_SW_REV_LEN];
+ char vendor_id[AM6_EEPROM_HDR_VID_LEN];
+ char build_week[AM6_EEPROM_HDR_BLD_WK_LEN];
+ char build_year[AM6_EEPROM_HDR_BLD_YR_LEN];
+ char board_4p_number[AM6_EEPROM_HDR_4P_NR_LEN];
+ char serial[AM6_EEPROM_HDR_SERIAL_LEN];
+} __attribute__ ((__packed__));
+
+/* Memory location to keep a copy of the AM6 board info record */
+#define TI_AM6_EEPROM_BD_INFO_DATA ((struct ti_am6_eeprom_record_board_info *) \
+ TI_SRAM_SCRATCH_BOARD_EEPROM_START)
+
+/* AM6x TI EVM EEPROM DDR info structure */
+#define TI_AM6_EEPROM_DDR_CTRL_INSTANCE_MASK GENMASK(1, 0)
+#define TI_AM6_EEPROM_DDR_CTRL_INSTANCE_SHIFT 0
+#define TI_AM6_EEPROM_DDR_CTRL_SPD_DATA_LOC_MASK GENMASK(3, 2)
+#define TI_AM6_EEPROM_DDR_CTRL_SPD_DATA_LOC_NA (0 << 2)
+#define TI_AM6_EEPROM_DDR_CTRL_SPD_DATA_LOC_BOARDID (2 << 2)
+#define TI_AM6_EEPROM_DDR_CTRL_SPD_DATA_LOC_I2C51 (3 << 2)
+#define TI_AM6_EEPROM_DDR_CTRL_MEM_TYPE_MASK GENMASK(5, 4)
+#define TI_AM6_EEPROM_DDR_CTRL_MEM_TYPE_DDR3 (0 << 4)
+#define TI_AM6_EEPROM_DDR_CTRL_MEM_TYPE_DDR4 (1 << 4)
+#define TI_AM6_EEPROM_DDR_CTRL_MEM_TYPE_LPDDR4 (2 << 4)
+#define TI_AM6_EEPROM_DDR_CTRL_IF_DATA_WIDTH_MASK GENMASK(7, 6)
+#define TI_AM6_EEPROM_DDR_CTRL_IF_DATA_WIDTH_16 (0 << 6)
+#define TI_AM6_EEPROM_DDR_CTRL_IF_DATA_WIDTH_32 (1 << 6)
+#define TI_AM6_EEPROM_DDR_CTRL_IF_DATA_WIDTH_64 (2 << 6)
+#define TI_AM6_EEPROM_DDR_CTRL_DEV_DATA_WIDTH_MASK GENMASK(9, 8)
+#define TI_AM6_EEPROM_DDR_CTRL_DEV_DATA_WIDTH_8 (0 << 8)
+#define TI_AM6_EEPROM_DDR_CTRL_DEV_DATA_WIDTH_16 (1 << 8)
+#define TI_AM6_EEPROM_DDR_CTRL_DEV_DATA_WIDTH_32 (2 << 8)
+#define TI_AM6_EEPROM_DDR_CTRL_RANKS_2 BIT(10)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_MASK GENMASK(13, 11)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_1GB (0 << 11)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_2GB (1 << 11)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_4GB (2 << 11)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_8GB (3 << 11)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_12GB (4 << 11)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_16GB (5 << 11)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_24GB (6 << 11)
+#define TI_AM6_EEPROM_DDR_CTRL_DENS_32GB (7 << 11)
+#define TI_AM6_EEPROM_DDR_CTRL_ECC BIT(14)
+
+struct ti_am6_eeprom_record_ddr_info {
+ u16 ddr_control;
+} __attribute__ ((__packed__));
+
+/* AM6x TI EVM EEPROM DDR SPD structure */
+#define TI_AM6_EEPROM_DDR_SPD_INSTANCE_MASK GENMASK(1, 0)
+#define TI_AM6_EEPROM_DDR_SPD_INSTANCE_SHIFT 0
+#define TI_AM6_EEPROM_DDR_SPD_MEM_TYPE_MASK GENMASK(4, 3)
+#define TI_AM6_EEPROM_DDR_SPD_MEM_TYPE_DDR3 (0 << 3)
+#define TI_AM6_EEPROM_DDR_SPD_MEM_TYPE_DDR4 (1 << 3)
+#define TI_AM6_EEPROM_DDR_SPD_MEM_TYPE_LPDDR4 (2 << 3)
+#define TI_AM6_EEPROM_DDR_SPD_DATA_LEN 512
+
+struct ti_am6_eeprom_record_ddr_spd {
+ u16 spd_control;
+ u8 data[TI_AM6_EEPROM_DDR_SPD_DATA_LEN];
+} __attribute__ ((__packed__));
+
+/* AM6x TI EVM EEPROM MAC info structure */
+#define TI_AM6_EEPROM_MAC_INFO_INSTANCE_MASK GENMASK(2, 0)
+#define TI_AM6_EEPROM_MAC_INFO_INSTANCE_SHIFT 0
+#define TI_AM6_EEPROM_MAC_ADDR_COUNT_MASK GENMASK(7, 3)
+#define TI_AM6_EEPROM_MAC_ADDR_COUNT_SHIFT 3
+#define TI_AM6_EEPROM_MAC_ADDR_MAX_COUNT 32
+
+struct ti_am6_eeprom_record_mac_info {
+ u16 mac_control;
+ u8 mac_addr[TI_AM6_EEPROM_MAC_ADDR_MAX_COUNT][TI_EEPROM_HDR_ETH_ALEN];
+} __attribute__ ((__packed__));
+
+struct ti_am6_eeprom_record {
+ struct ti_am6_eeprom_record_header header;
+ union {
+ struct ti_am6_eeprom_record_board_info board_info;
+ struct ti_am6_eeprom_record_ddr_info ddr_info;
+ struct ti_am6_eeprom_record_ddr_spd ddr_spd;
+ struct ti_am6_eeprom_record_mac_info mac_info;
+ } data;
+} __attribute__ ((__packed__));
+
/* DRA7 EEPROM MAGIC Header identifier */
#define DRA7_EEPROM_HEADER_MAGIC 0xAA5533EE
#define DRA7_EEPROM_HDR_NAME_LEN 16
@@ -99,6 +226,37 @@
#define TI_EEPROM_DATA ((struct ti_common_eeprom *)\
TI_SRAM_SCRATCH_BOARD_EEPROM_START)
+/*
+ * Maximum number of Ethernet MAC addresses extracted from the AM6x on-board
+ * EEPROM during the initial probe and carried forward in SRAM.
+ */
+#define AM6_EEPROM_HDR_NO_OF_MAC_ADDR 8
+
+/**
+ * struct ti_am6_eeprom - Null terminated, usable EEPROM contents, as extracted
+ * from the AM6 on-board EEPROM. Note that we only carry a subset of data
+ * at this time to be considerate about memory consumption.
+ * @header: Magic number for data validity indication
+ * @name: NULL terminated name
+ * @version: NULL terminated version
+ * @software_revision: NULL terminated software revision
+ * @serial: Board serial number
+ * @mac_addr_cnt: Number of MAC addresses stored in this object
+ * @mac_addr: MAC addresses
+ */
+struct ti_am6_eeprom {
+ u32 header;
+ char name[AM6_EEPROM_HDR_NAME_LEN + 1];
+ char version[AM6_EEPROM_HDR_VERSION_LEN + 1];
+ char software_revision[AM6_EEPROM_HDR_SW_REV_LEN + 1];
+ char serial[AM6_EEPROM_HDR_SERIAL_LEN + 1];
+ u8 mac_addr_cnt;
+ char mac_addr[AM6_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
+};
+
+#define TI_AM6_EEPROM_DATA ((struct ti_am6_eeprom *) \
+ TI_SRAM_SCRATCH_BOARD_EEPROM_START)
+
/**
* ti_i2c_eeprom_am_get() - Consolidated eeprom data collection for AM* TI EVMs
* @bus_addr: I2C bus address
@@ -117,6 +275,33 @@
int ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr);
/**
+ * ti_i2c_eeprom_am6_get() - Consolidated eeprom data for AM6x TI EVMs and
+ * associated daughter cards, parsed into user-
+ * provided data structures
+ * @bus_addr: I2C bus address
+ * @dev_addr: I2C slave address
+ * @ep: Pointer to structure receiving AM6-specific header data
+ * @mac_addr: Pointer to memory receiving parsed MAC addresses. May be
+ * NULL to skip MAC parsing.
+ * @mac_addr_max_cnt: Maximum number of MAC addresses that can be stored into
+ * mac_addr. May be NULL to skip MAC parsing.
+ * @mac_addr_cnt: Pointer to a location returning how many MAC addressed got
+ * actually parsed.
+ */
+int __maybe_unused ti_i2c_eeprom_am6_get(int bus_addr, int dev_addr,
+ struct ti_am6_eeprom *ep,
+ char **mac_addr,
+ u8 mac_addr_max_cnt,
+ u8 *mac_addr_cnt);
+
+/**
+ * ti_i2c_eeprom_am6_get_base() - Consolidated eeprom data for AM6x TI EVMs
+ * @bus_addr: I2C bus address
+ * @dev_addr: I2C slave address
+ */
+int __maybe_unused ti_i2c_eeprom_am6_get_base(int bus_addr, int dev_addr);
+
+/**
* board_ti_is() - Board detection logic for TI EVMs
* @name_tag: Tag used in eeprom for the board
*
@@ -193,6 +378,15 @@
void set_board_info_env(char *name);
/**
+ * set_board_info_env_am6() - Setup commonly used board information environment
+ * vars for AM6-type boards
+ * @name: Name of the board
+ *
+ * If name is NULL, default_name is used.
+ */
+void set_board_info_env_am6(char *name);
+
+/**
* board_ti_set_ethaddr- Sets the ethaddr environment from EEPROM
* @index: The first eth<index>addr environment variable to set
*
@@ -205,6 +399,18 @@
void board_ti_set_ethaddr(int index);
/**
+ * board_ti_am6_set_ethaddr- Sets the ethaddr environment from EEPROM
+ * @index: The first eth<index>addr environment variable to set
+ * @count: The number of MAC addresses to process
+ *
+ * EEPROM should be already read before calling this function. The EEPROM
+ * contains n dedicated MAC addresses. This function sets the ethaddr
+ * environment variable for all the available MAC addresses starting
+ * from eth<index>addr.
+ */
+void board_ti_am6_set_ethaddr(int index, int count);
+
+/**
* board_ti_was_eeprom_read() - Check to see if the eeprom contents have been read
*
* This function is useful to determine if the eeprom has already been read and
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 7122c06..5978fb2 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -248,6 +248,16 @@
info. Disabling this option could be useful to reduce SPL boot time
(e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
+config SPL_EARLY_BSS
+ depends on ARM && !ARM64
+ bool "Allows initializing BSS early before entering board_init_f"
+ help
+ On some platform we have sufficient memory available early on to
+ allow setting up and using a basic BSS prior to entering
+ board_init_f. Activating this option will also de-activate the
+ clearing of BSS during the SPL relocation process, thus allowing
+ to carry state from board_init_f to board_init_r by way of BSS.
+
config SPL_DISPLAY_PRINT
bool "Display a board-specific message in SPL"
help
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 87ecf0b..969f777 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -340,6 +340,16 @@
#endif
}
+/*
+ * Weak default function to allow customizing SPL fit loading for load-only
+ * use cases by allowing to skip the parsing/processing of the FIT contents
+ * (so that this can be done separately in a more customized fashion)
+ */
+__weak bool spl_load_simple_fit_skip_processing(void)
+{
+ return false;
+}
+
int spl_load_simple_fit(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector, void *fit)
{
@@ -389,6 +399,10 @@
if (count == 0)
return -EIO;
+ /* skip further processing if requested to enable load-only use cases */
+ if (spl_load_simple_fit_skip_processing())
+ return 0;
+
/* find the node holding the images information */
images = fdt_path_offset(fit, FIT_IMAGES_PATH);
if (images < 0) {
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 324d91c..b361988 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -151,7 +151,8 @@
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
static int mmc_load_image_raw_partition(struct spl_image_info *spl_image,
- struct mmc *mmc, int partition)
+ struct mmc *mmc, int partition,
+ unsigned long sector)
{
disk_partition_t info;
int err;
@@ -180,8 +181,7 @@
}
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
- return mmc_load_image_raw_sector(spl_image, mmc,
- info.start + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+ return mmc_load_image_raw_sector(spl_image, mmc, info.start + sector);
#else
return mmc_load_image_raw_sector(spl_image, mmc, info.start);
#endif
@@ -234,7 +234,8 @@
#endif
#ifdef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
-static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc)
+static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc,
+ const char *filename)
{
int err = -ENOSYS;
@@ -248,7 +249,7 @@
#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
err = spl_load_image_fat(spl_image, mmc_get_blk_desc(mmc),
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
- CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
+ filename);
if (!err)
return err;
#endif
@@ -263,7 +264,7 @@
#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
err = spl_load_image_ext(spl_image, mmc_get_blk_desc(mmc),
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
- CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
+ filename);
if (!err)
return err;
#endif
@@ -276,7 +277,8 @@
return err;
}
#else
-static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc)
+static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc,
+ const char *filename)
{
return -ENOSYS;
}
@@ -301,24 +303,31 @@
}
#endif
-int spl_mmc_load_image(struct spl_image_info *spl_image,
- struct spl_boot_device *bootdev)
+int spl_mmc_load(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
+ const char *filename,
+ int raw_part,
+ unsigned long raw_sect)
{
- struct mmc *mmc = NULL;
+ static struct mmc *mmc;
u32 boot_mode;
int err = 0;
__maybe_unused int part;
- err = spl_mmc_find_device(&mmc, bootdev->boot_device);
- if (err)
- return err;
+ /* Perform peripheral init only once */
+ if (!mmc) {
+ err = spl_mmc_find_device(&mmc, bootdev->boot_device);
+ if (err)
+ return err;
- err = mmc_init(mmc);
- if (err) {
+ err = mmc_init(mmc);
+ if (err) {
+ mmc = NULL;
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
- printf("spl: mmc init failed with error: %d\n", err);
+ printf("spl: mmc init failed with error: %d\n", err);
#endif
- return err;
+ return err;
+ }
}
boot_mode = spl_boot_mode(bootdev->boot_device);
@@ -356,17 +365,13 @@
return err;
}
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
- err = spl_boot_partition(bootdev->boot_device);
- if (!err)
- return err;
-
- err = mmc_load_image_raw_partition(spl_image, mmc, err);
+ err = mmc_load_image_raw_partition(spl_image, mmc, raw_part,
+ raw_sect);
if (!err)
return err;
#endif
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
- err = mmc_load_image_raw_sector(spl_image, mmc,
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+ err = mmc_load_image_raw_sector(spl_image, mmc, raw_sect);
if (!err)
return err;
#endif
@@ -374,7 +379,7 @@
case MMCSD_MODE_FS:
debug("spl: mmc boot mode: fs\n");
- err = spl_mmc_do_fs_boot(spl_image, mmc);
+ err = spl_mmc_do_fs_boot(spl_image, mmc, filename);
if (!err)
return err;
@@ -388,6 +393,27 @@
return err;
}
+int spl_mmc_load_image(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
+{
+ return spl_mmc_load(spl_image, bootdev,
+#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
+ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+ spl_boot_partition(bootdev->boot_device),
+#else
+ 0,
+#endif
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+#else
+ 0);
+#endif
+}
+
SPL_LOAD_IMAGE_METHOD("MMC1", 0, BOOT_DEVICE_MMC1, spl_mmc_load_image);
SPL_LOAD_IMAGE_METHOD("MMC2", 0, BOOT_DEVICE_MMC2, spl_mmc_load_image);
SPL_LOAD_IMAGE_METHOD("MMC2_2", 0, BOOT_DEVICE_MMC2_2, spl_mmc_load_image);
diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig
index ffe013f..9ccbd68 100644
--- a/configs/am335x_boneblack_vboot_defconfig
+++ b/configs/am335x_boneblack_vboot_defconfig
@@ -1,4 +1,8 @@
CONFIG_ARM=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_TPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
+# CONFIG_TPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_AM33XX=y
diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig
index b940af3..9d4c6a2 100644
--- a/configs/am65x_evm_a53_defconfig
+++ b/configs/am65x_evm_a53_defconfig
@@ -2,7 +2,7 @@
CONFIG_ARCH_K3=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_SOC_K3_AM6=y
CONFIG_TARGET_AM654_A53_EVM=y
CONFIG_SPL_MMC_SUPPORT=y
@@ -16,12 +16,14 @@
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_RESET=y
@@ -30,35 +32,41 @@
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="k3-am654-base-board"
CONFIG_SPL_MULTI_DTB_FIT=y
CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_ENV_FAT_INTERFACE="mmc"
-CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
+CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_TI_SCI=y
CONFIG_DMA_CHANNELS=y
CONFIG_TI_K3_NAVSS_UDMA=y
CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_K3_ARASAN=y
+CONFIG_MMC_SDHCI_AM654=y
CONFIG_PHY_TI=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
@@ -80,3 +88,5 @@
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_TI_SCI=y
+CONFIG_FAT_WRITE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig
index 3814872..7e81a98 100644
--- a/configs/am65x_evm_r5_defconfig
+++ b/configs/am65x_evm_r5_defconfig
@@ -3,7 +3,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_MALLOC_F_LEN=0x55000
CONFIG_SOC_K3_AM6=y
CONFIG_TARGET_AM654_R5_EVM=y
CONFIG_SPL_MMC_SUPPORT=y
@@ -18,9 +18,11 @@
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_TEXT_BASE=0x41c00000
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_EARLY_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_RESET=y
@@ -35,6 +37,7 @@
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
# CONFIG_CMD_SETEXPR is not set
@@ -51,6 +54,8 @@
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
@@ -58,12 +63,15 @@
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_DM_GPIO=y
CONFIG_DA8XX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_K3_ARASAN=y
+CONFIG_MMC_SDHCI_AM654=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_GENERIC is not set
CONFIG_SPL_PINCTRL=y
@@ -88,3 +96,4 @@
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_OMAP_TIMER=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig
index 9c55cd3..56052f7 100644
--- a/configs/am65x_hs_evm_a53_defconfig
+++ b/configs/am65x_hs_evm_a53_defconfig
@@ -3,7 +3,7 @@
CONFIG_TI_SECURE_DEVICE=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_SOC_K3_AM6=y
CONFIG_TARGET_AM654_A53_EVM=y
CONFIG_SPL_MMC_SUPPORT=y
@@ -19,12 +19,14 @@
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_RESET=y
@@ -33,6 +35,7 @@
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
# CONFIG_CMD_SETEXPR is not set
@@ -56,6 +59,11 @@
CONFIG_DMA_CHANNELS=y
CONFIG_TI_K3_NAVSS_UDMA=y
CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
CONFIG_DM_MMC=y
@@ -77,3 +85,4 @@
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_TI_SCI=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/am65x_hs_evm_r5_defconfig b/configs/am65x_hs_evm_r5_defconfig
index 0b12f15..d378d1e 100644
--- a/configs/am65x_hs_evm_r5_defconfig
+++ b/configs/am65x_hs_evm_r5_defconfig
@@ -4,7 +4,7 @@
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_MALLOC_F_LEN=0x55000
CONFIG_SOC_K3_AM6=y
CONFIG_TARGET_AM654_R5_EVM=y
CONFIG_SPL_MMC_SUPPORT=y
@@ -20,9 +20,11 @@
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_TEXT_BASE=0x41c00000
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_EARLY_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_RESET=y
@@ -37,6 +39,7 @@
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_REMOTEPROC=y
# CONFIG_CMD_SETEXPR is not set
@@ -60,6 +63,9 @@
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_DM_GPIO=y
CONFIG_DA8XX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
CONFIG_MISC=y
@@ -90,3 +96,4 @@
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_OMAP_TIMER=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
diff --git a/drivers/core/regmap.c b/drivers/core/regmap.c
index 5ef0f71..d1d12ee 100644
--- a/drivers/core/regmap.c
+++ b/drivers/core/regmap.c
@@ -108,6 +108,48 @@
return 0;
}
+int regmap_init_mem_index(ofnode node, struct regmap **mapp, int index)
+{
+ struct regmap *map;
+ int addr_len, size_len;
+ int ret;
+
+ addr_len = ofnode_read_simple_addr_cells(ofnode_get_parent(node));
+ if (addr_len < 0) {
+ debug("%s: Error while reading the addr length (ret = %d)\n",
+ ofnode_get_name(node), addr_len);
+ return addr_len;
+ }
+
+ size_len = ofnode_read_simple_size_cells(ofnode_get_parent(node));
+ if (size_len < 0) {
+ debug("%s: Error while reading the size length: (ret = %d)\n",
+ ofnode_get_name(node), size_len);
+ return size_len;
+ }
+
+ map = regmap_alloc(1);
+ if (!map)
+ return -ENOMEM;
+
+ ret = init_range(node, map->ranges, addr_len, size_len, index);
+ if (ret)
+ return ret;
+
+ if (ofnode_read_bool(node, "little-endian"))
+ map->endianness = REGMAP_LITTLE_ENDIAN;
+ else if (ofnode_read_bool(node, "big-endian"))
+ map->endianness = REGMAP_BIG_ENDIAN;
+ else if (ofnode_read_bool(node, "native-endian"))
+ map->endianness = REGMAP_NATIVE_ENDIAN;
+ else /* Default: native endianness */
+ map->endianness = REGMAP_NATIVE_ENDIAN;
+
+ *mapp = map;
+
+ return ret;
+}
+
int regmap_init_mem(ofnode node, struct regmap **mapp)
{
struct regmap_range *range;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 095a9bc..4772db3 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -330,7 +330,7 @@
config SYS_I2C_OMAP24XX
bool "TI OMAP2+ I2C driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || ARCH_K3
help
Add support for the OMAP2+ I2C driver.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 890ef35..4cdae41 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -468,14 +468,15 @@
If unsure, say N.
-config MMC_SDHCI_K3_ARASAN
- bool "Arasan SDHCI controller for TI's K3 based SoCs"
+config MMC_SDHCI_AM654
+ bool "SDHCI Controller on TI's Am654 devices"
depends on ARCH_K3
depends on MMC_SDHCI
depends on DM_MMC && OF_CONTROL && BLK
+ depends on REGMAP
help
- Support for Arasan SDHCI host controller on Texas Instruments'
- K3 family based SoC platforms
+ Support for Secure Digital Host Controller Interface (SDHCI)
+ controllers present on TI's AM654 SOCs.
config MMC_SDHCI_KONA
bool "SDHCI support on Broadcom KONA platform"
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 3c8c53a..6cc018b 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -50,7 +50,7 @@
obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o
obj-$(CONFIG_MMC_SDHCI_BCMSTB) += bcmstb_sdhci.o
obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o
-obj-$(CONFIG_MMC_SDHCI_K3_ARASAN) += k3_arsan_sdhci.o
+obj-$(CONFIG_MMC_SDHCI_AM654) += am654_sdhci.o
obj-$(CONFIG_MMC_SDHCI_KONA) += kona_sdhci.o
obj-$(CONFIG_MMC_SDHCI_MSM) += msm_sdhci.o
obj-$(CONFIG_MMC_SDHCI_MV) += mv_sdhci.o
diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
new file mode 100644
index 0000000..fb0fb58
--- /dev/null
+++ b/drivers/mmc/am654_sdhci.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Texas Instruments' K3 SD Host Controller Interface
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <power-domain.h>
+#include <regmap.h>
+#include <sdhci.h>
+
+/* CTL_CFG Registers */
+#define CTL_CFG_2 0x14
+
+#define SLOTTYPE_MASK GENMASK(31, 30)
+#define SLOTTYPE_EMBEDDED BIT(30)
+
+/* PHY Registers */
+#define PHY_CTRL1 0x100
+#define PHY_CTRL2 0x104
+#define PHY_CTRL3 0x108
+#define PHY_CTRL4 0x10C
+#define PHY_CTRL5 0x110
+#define PHY_CTRL6 0x114
+#define PHY_STAT1 0x130
+#define PHY_STAT2 0x134
+
+#define IOMUX_ENABLE_SHIFT 31
+#define IOMUX_ENABLE_MASK BIT(IOMUX_ENABLE_SHIFT)
+#define OTAPDLYENA_SHIFT 20
+#define OTAPDLYENA_MASK BIT(OTAPDLYENA_SHIFT)
+#define OTAPDLYSEL_SHIFT 12
+#define OTAPDLYSEL_MASK GENMASK(15, 12)
+#define STRBSEL_SHIFT 24
+#define STRBSEL_MASK GENMASK(27, 24)
+#define SEL50_SHIFT 8
+#define SEL50_MASK BIT(SEL50_SHIFT)
+#define SEL100_SHIFT 9
+#define SEL100_MASK BIT(SEL100_SHIFT)
+#define DLL_TRIM_ICP_SHIFT 4
+#define DLL_TRIM_ICP_MASK GENMASK(7, 4)
+#define DR_TY_SHIFT 20
+#define DR_TY_MASK GENMASK(22, 20)
+#define ENDLL_SHIFT 1
+#define ENDLL_MASK BIT(ENDLL_SHIFT)
+#define DLLRDY_SHIFT 0
+#define DLLRDY_MASK BIT(DLLRDY_SHIFT)
+#define PDB_SHIFT 0
+#define PDB_MASK BIT(PDB_SHIFT)
+#define CALDONE_SHIFT 1
+#define CALDONE_MASK BIT(CALDONE_SHIFT)
+#define RETRIM_SHIFT 17
+#define RETRIM_MASK BIT(RETRIM_SHIFT)
+
+#define DRIVER_STRENGTH_50_OHM 0x0
+#define DRIVER_STRENGTH_33_OHM 0x1
+#define DRIVER_STRENGTH_66_OHM 0x2
+#define DRIVER_STRENGTH_100_OHM 0x3
+#define DRIVER_STRENGTH_40_OHM 0x4
+
+#define AM654_SDHCI_MIN_FREQ 400000
+
+struct am654_sdhci_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+ struct regmap *base;
+ bool non_removable;
+ u32 otap_del_sel;
+ u32 trm_icp;
+ u32 drv_strength;
+ bool dll_on;
+};
+
+static void am654_sdhci_set_control_reg(struct sdhci_host *host)
+{
+ struct mmc *mmc = (struct mmc *)host->mmc;
+ u32 reg;
+
+ if (IS_SD(host->mmc) &&
+ mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
+ reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ reg |= SDHCI_CTRL_VDD_180;
+ sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
+ }
+
+ sdhci_set_uhs_timing(host);
+}
+
+static int am654_sdhci_set_ios_post(struct sdhci_host *host)
+{
+ struct udevice *dev = host->mmc->dev;
+ struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+ unsigned int speed = host->mmc->clock;
+ int sel50, sel100;
+ u32 mask, val;
+ int ret;
+
+ /* Reset SD Clock Enable */
+ val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ val &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, val, SDHCI_CLOCK_CONTROL);
+
+ /* power off phy */
+ if (plat->dll_on) {
+ regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK, 0);
+
+ plat->dll_on = false;
+ }
+
+ /* restart clock */
+ sdhci_set_clock(host->mmc, speed);
+
+ /* switch phy back on */
+ if (speed > AM654_SDHCI_MIN_FREQ) {
+ mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
+ val = (1 << OTAPDLYENA_SHIFT) |
+ (plat->otap_del_sel << OTAPDLYSEL_SHIFT);
+ regmap_update_bits(plat->base, PHY_CTRL4, mask, val);
+ switch (speed) {
+ case 200000000:
+ sel50 = 0;
+ sel100 = 0;
+ break;
+ case 100000000:
+ sel50 = 0;
+ sel100 = 1;
+ break;
+ default:
+ sel50 = 1;
+ sel100 = 0;
+ }
+
+ /* Configure PHY DLL frequency */
+ mask = SEL50_MASK | SEL100_MASK;
+ val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT);
+ regmap_update_bits(plat->base, PHY_CTRL5, mask, val);
+
+ /* Enable DLL */
+ regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK,
+ 0x1 << ENDLL_SHIFT);
+ /*
+ * Poll for DLL ready. Use a one second timeout.
+ * Works in all experiments done so far
+ */
+ ret = regmap_read_poll_timeout(plat->base, PHY_STAT1, val,
+ val & DLLRDY_MASK, 1000, 1000000);
+ if (ret)
+ return ret;
+
+ plat->dll_on = true;
+ }
+
+ return 0;
+}
+
+const struct sdhci_ops am654_sdhci_ops = {
+ .set_ios_post = &am654_sdhci_set_ios_post,
+ .set_control_reg = &am654_sdhci_set_control_reg,
+};
+
+int am654_sdhci_init(struct am654_sdhci_plat *plat)
+{
+ u32 ctl_cfg_2 = 0;
+ u32 mask, val;
+ int ret;
+
+ /* Reset OTAP to default value */
+ mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
+ regmap_update_bits(plat->base, PHY_CTRL4, mask, 0x0);
+
+ regmap_read(plat->base, PHY_STAT1, &val);
+ if (~val & CALDONE_MASK) {
+ /* Calibrate IO lines */
+ regmap_update_bits(plat->base, PHY_CTRL1, PDB_MASK, PDB_MASK);
+ ret = regmap_read_poll_timeout(plat->base, PHY_STAT1, val,
+ val & CALDONE_MASK, 1, 20);
+ if (ret)
+ return ret;
+ }
+
+ /* Configure DLL TRIM */
+ mask = DLL_TRIM_ICP_MASK;
+ val = plat->trm_icp << DLL_TRIM_ICP_SHIFT;
+
+ /* Configure DLL driver strength */
+ mask |= DR_TY_MASK;
+ val |= plat->drv_strength << DR_TY_SHIFT;
+ regmap_update_bits(plat->base, PHY_CTRL1, mask, val);
+
+ /* Enable pins by setting IO mux to 0 */
+ regmap_update_bits(plat->base, PHY_CTRL1, IOMUX_ENABLE_MASK, 0);
+
+ /* Set slot type based on SD or eMMC */
+ if (plat->non_removable)
+ ctl_cfg_2 = SLOTTYPE_EMBEDDED;
+
+ regmap_update_bits(plat->base, CTL_CFG_2, SLOTTYPE_MASK, ctl_cfg_2);
+
+ return 0;
+}
+
+static int am654_sdhci_probe(struct udevice *dev)
+{
+ struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+ struct mmc_config *cfg = &plat->cfg;
+ struct power_domain sdhci_pwrdmn;
+ struct clk clk;
+ unsigned long clock;
+ int ret;
+
+ ret = power_domain_get_by_index(dev, &sdhci_pwrdmn, 0);
+ if (!ret) {
+ ret = power_domain_on(&sdhci_pwrdmn);
+ if (ret) {
+ dev_err(dev, "Power domain on failed (%d)\n", ret);
+ return ret;
+ }
+ } else if (ret != -ENOENT && ret != -ENODEV && ret != -ENOSYS) {
+ dev_err(dev, "failed to get power domain (%d)\n", ret);
+ return ret;
+ }
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret) {
+ dev_err(dev, "failed to get clock\n");
+ return ret;
+ }
+
+ clock = clk_get_rate(&clk);
+ if (IS_ERR_VALUE(clock)) {
+ dev_err(dev, "failed to get rate\n");
+ return clock;
+ }
+
+ host->max_clk = clock;
+ host->mmc = &plat->mmc;
+ host->mmc->dev = dev;
+ ret = sdhci_setup_cfg(cfg, host, cfg->f_max,
+ AM654_SDHCI_MIN_FREQ);
+ if (ret)
+ return ret;
+ host->ops = &am654_sdhci_ops;
+ host->mmc->priv = host;
+ upriv->mmc = host->mmc;
+
+ regmap_init_mem_index(dev_ofnode(dev), &plat->base, 1);
+
+ am654_sdhci_init(plat);
+
+ return sdhci_probe(dev);
+}
+
+static int am654_sdhci_ofdata_to_platdata(struct udevice *dev)
+{
+ struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+ struct mmc_config *cfg = &plat->cfg;
+ u32 drv_strength;
+ int ret;
+
+ host->name = dev->name;
+ host->ioaddr = (void *)dev_read_addr(dev);
+ plat->non_removable = dev_read_bool(dev, "non-removable");
+
+ ret = dev_read_u32(dev, "ti,trm-icp", &plat->trm_icp);
+ if (ret)
+ return ret;
+
+ ret = dev_read_u32(dev, "ti,otap-del-sel", &plat->otap_del_sel);
+ if (ret)
+ return ret;
+
+ ret = dev_read_u32(dev, "ti,driver-strength-ohm", &drv_strength);
+ if (ret)
+ return ret;
+
+ switch (drv_strength) {
+ case 50:
+ plat->drv_strength = DRIVER_STRENGTH_50_OHM;
+ break;
+ case 33:
+ plat->drv_strength = DRIVER_STRENGTH_33_OHM;
+ break;
+ case 66:
+ plat->drv_strength = DRIVER_STRENGTH_66_OHM;
+ break;
+ case 100:
+ plat->drv_strength = DRIVER_STRENGTH_100_OHM;
+ break;
+ case 40:
+ plat->drv_strength = DRIVER_STRENGTH_40_OHM;
+ break;
+ default:
+ dev_err(dev, "Invalid driver strength\n");
+ return -EINVAL;
+ }
+
+ ret = mmc_of_parse(dev, cfg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int am654_sdhci_bind(struct udevice *dev)
+{
+ struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+
+ return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static const struct udevice_id am654_sdhci_ids[] = {
+ { .compatible = "ti,am654-sdhci-5.1" },
+ { }
+};
+
+U_BOOT_DRIVER(am654_sdhci_drv) = {
+ .name = "am654_sdhci",
+ .id = UCLASS_MMC,
+ .of_match = am654_sdhci_ids,
+ .ofdata_to_platdata = am654_sdhci_ofdata_to_platdata,
+ .ops = &sdhci_ops,
+ .bind = am654_sdhci_bind,
+ .probe = am654_sdhci_probe,
+ .priv_auto_alloc_size = sizeof(struct sdhci_host),
+ .platdata_auto_alloc_size = sizeof(struct am654_sdhci_plat),
+};
diff --git a/drivers/mmc/k3_arsan_sdhci.c b/drivers/mmc/k3_arsan_sdhci.c
deleted file mode 100644
index d5f2857..0000000
--- a/drivers/mmc/k3_arsan_sdhci.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Texas Instruments' K3 SD Host Controller Interface
- */
-
-#include <clk.h>
-#include <common.h>
-#include <dm.h>
-#include <malloc.h>
-#include <power-domain.h>
-#include <sdhci.h>
-
-#define K3_ARASAN_SDHCI_MIN_FREQ 0
-
-struct k3_arasan_sdhci_plat {
- struct mmc_config cfg;
- struct mmc mmc;
- unsigned int f_max;
-};
-
-static int k3_arasan_sdhci_probe(struct udevice *dev)
-{
- struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
- struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
- struct sdhci_host *host = dev_get_priv(dev);
- struct power_domain sdhci_pwrdmn;
- struct clk clk;
- unsigned long clock;
- int ret;
-
- ret = power_domain_get_by_index(dev, &sdhci_pwrdmn, 0);
- if (ret) {
- dev_err(dev, "failed to get power domain\n");
- return ret;
- }
-
- ret = power_domain_on(&sdhci_pwrdmn);
- if (ret) {
- dev_err(dev, "Power domain on failed\n");
- return ret;
- }
-
- ret = clk_get_by_index(dev, 0, &clk);
- if (ret) {
- dev_err(dev, "failed to get clock\n");
- return ret;
- }
-
- clock = clk_get_rate(&clk);
- if (IS_ERR_VALUE(clock)) {
- dev_err(dev, "failed to get rate\n");
- return clock;
- }
-
- host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
- SDHCI_QUIRK_BROKEN_R1B;
-
- host->max_clk = clock;
-
- ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
- K3_ARASAN_SDHCI_MIN_FREQ);
- host->mmc = &plat->mmc;
- if (ret)
- return ret;
- host->mmc->priv = host;
- host->mmc->dev = dev;
- upriv->mmc = host->mmc;
-
- return sdhci_probe(dev);
-}
-
-static int k3_arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
-{
- struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
- struct sdhci_host *host = dev_get_priv(dev);
-
- host->name = dev->name;
- host->ioaddr = (void *)dev_read_addr(dev);
- host->bus_width = dev_read_u32_default(dev, "bus-width", 4);
- plat->f_max = dev_read_u32_default(dev, "max-frequency", 0);
-
- return 0;
-}
-
-static int k3_arasan_sdhci_bind(struct udevice *dev)
-{
- struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
-
- return sdhci_bind(dev, &plat->mmc, &plat->cfg);
-}
-
-static const struct udevice_id k3_arasan_sdhci_ids[] = {
- { .compatible = "arasan,sdhci-5.1" },
- { }
-};
-
-U_BOOT_DRIVER(k3_arasan_sdhci_drv) = {
- .name = "k3_arasan_sdhci",
- .id = UCLASS_MMC,
- .of_match = k3_arasan_sdhci_ids,
- .ofdata_to_platdata = k3_arasan_sdhci_ofdata_to_platdata,
- .ops = &sdhci_ops,
- .bind = k3_arasan_sdhci_bind,
- .probe = k3_arasan_sdhci_probe,
- .priv_auto_alloc_size = sizeof(struct sdhci_host),
- .platdata_auto_alloc_size = sizeof(struct k3_arasan_sdhci_plat),
-};
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index c4e8879..0a0770c 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
#include <malloc.h>
#include <mmc.h>
@@ -409,7 +410,7 @@
return 0;
}
#endif
-static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
+int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
{
struct sdhci_host *host = mmc->priv;
unsigned int div, clk = 0, timeout;
@@ -533,6 +534,34 @@
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
}
+void sdhci_set_uhs_timing(struct sdhci_host *host)
+{
+ struct mmc *mmc = (struct mmc *)host->mmc;
+ u32 reg;
+
+ reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ reg &= ~SDHCI_CTRL_UHS_MASK;
+
+ switch (mmc->selected_mode) {
+ case UHS_SDR50:
+ case MMC_HS_52:
+ reg |= SDHCI_CTRL_UHS_SDR50;
+ break;
+ case UHS_DDR50:
+ case MMC_DDR_52:
+ reg |= SDHCI_CTRL_UHS_DDR50;
+ break;
+ case UHS_SDR104:
+ case MMC_HS_200:
+ reg |= SDHCI_CTRL_UHS_SDR104;
+ break;
+ default:
+ reg |= SDHCI_CTRL_UHS_SDR12;
+ }
+
+ sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
+}
+
#ifdef CONFIG_DM_MMC
static int sdhci_set_ios(struct udevice *dev)
{
@@ -583,7 +612,7 @@
/* If available, call the driver specific "post" set_ios() function */
if (host->ops && host->ops->set_ios_post)
- host->ops->set_ios_post(host);
+ return host->ops->set_ios_post(host);
return 0;
}
@@ -681,8 +710,18 @@
u32 f_max, u32 f_min)
{
u32 caps, caps_1 = 0;
+#if CONFIG_IS_ENABLED(DM_MMC)
+ u32 mask[2] = {0};
+ int ret;
+ ret = dev_read_u32_array(host->mmc->dev, "sdhci-caps-mask",
+ mask, 2);
+ if (ret && ret != -1)
+ return ret;
+ caps = ~mask[1] & sdhci_readl(host, SDHCI_CAPABILITIES);
+#else
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+#endif
#ifdef CONFIG_MMC_SDHCI_SDMA
if (!(caps & SDHCI_CAN_DO_SDMA)) {
@@ -722,7 +761,11 @@
/* Check whether the clock multiplier is supported or not */
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+#if CONFIG_IS_ENABLED(DM_MMC)
+ caps_1 = ~mask[0] & sdhci_readl(host, SDHCI_CAPABILITIES_1);
+#else
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+#endif
host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
SDHCI_CLOCK_MUL_SHIFT;
}
@@ -779,9 +822,6 @@
cfg->host_caps &= ~MMC_MODE_HS_52MHz;
}
- if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
- caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
-
if (!(cfg->voltages & MMC_VDD_165_195) ||
(host->quirks & SDHCI_QUIRK_NO_1_8_V))
caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
diff --git a/drivers/mmc/xenon_sdhci.c b/drivers/mmc/xenon_sdhci.c
index b576511..829b756 100644
--- a/drivers/mmc/xenon_sdhci.c
+++ b/drivers/mmc/xenon_sdhci.c
@@ -326,7 +326,7 @@
}
/* Platform specific function for post set_ios configuration */
-static void xenon_sdhci_set_ios_post(struct sdhci_host *host)
+static int xenon_sdhci_set_ios_post(struct sdhci_host *host)
{
struct xenon_sdhci_priv *priv = host->mmc->priv;
uint speed = host->mmc->tran_speed;
@@ -364,6 +364,8 @@
/* Re-init the PHY */
xenon_mmc_phy_set(host);
+
+ return 0;
}
/* Install a driver specific handler for post set_ios configuration */
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 0802378..c525084 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -48,11 +48,6 @@
[MMC_HS_200] = MMC_HS200_BUS_SPEED,
};
-#define SDHCI_HOST_CTRL2 0x3E
-#define SDHCI_CTRL2_MODE_MASK 0x7
-#define SDHCI_18V_SIGNAL 0x8
-#define SDHCI_CTRL_EXEC_TUNING 0x0040
-#define SDHCI_CTRL_TUNED_CLK 0x80
#define SDHCI_TUNING_LOOP_COUNT 40
static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
@@ -99,9 +94,9 @@
host = priv->host;
deviceid = priv->deviceid;
- ctrl = sdhci_readw(host, SDHCI_HOST_CTRL2);
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl |= SDHCI_CTRL_EXEC_TUNING;
- sdhci_writew(host, ctrl, SDHCI_HOST_CTRL2);
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
mdelay(1);
@@ -133,7 +128,7 @@
sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
mmc_send_cmd(mmc, &cmd, NULL);
- ctrl = sdhci_readw(host, SDHCI_HOST_CTRL2);
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
udelay(1);
@@ -142,7 +137,7 @@
if (tuning_loop_counter < 0) {
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
- sdhci_writel(host, ctrl, SDHCI_HOST_CTRL2);
+ sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2);
}
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
@@ -184,36 +179,14 @@
return;
if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
- reg = sdhci_readw(host, SDHCI_HOST_CTRL2);
- reg |= SDHCI_18V_SIGNAL;
- sdhci_writew(host, reg, SDHCI_HOST_CTRL2);
+ reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ reg |= SDHCI_CTRL_VDD_180;
+ sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
}
if (mmc->selected_mode > SD_HS &&
- mmc->selected_mode <= UHS_DDR50) {
- reg = sdhci_readw(host, SDHCI_HOST_CTRL2);
- reg &= ~SDHCI_CTRL2_MODE_MASK;
- switch (mmc->selected_mode) {
- case UHS_SDR12:
- reg |= UHS_SDR12_BUS_SPEED;
- break;
- case UHS_SDR25:
- reg |= UHS_SDR25_BUS_SPEED;
- break;
- case UHS_SDR50:
- reg |= UHS_SDR50_BUS_SPEED;
- break;
- case UHS_SDR104:
- reg |= UHS_SDR104_BUS_SPEED;
- break;
- case UHS_DDR50:
- reg |= UHS_DDR50_BUS_SPEED;
- break;
- default:
- break;
- }
- sdhci_writew(host, reg, SDHCI_HOST_CTRL2);
- }
+ mmc->selected_mode <= UHS_DDR50)
+ sdhci_set_uhs_timing(host);
}
#endif
diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h
index b043bf8..1415bb1 100644
--- a/include/configs/am65x_evm.h
+++ b/include/configs/am65x_evm.h
@@ -19,6 +19,32 @@
#define CONFIG_SYS_SDRAM_BASE1 0x880000000
/* SPL Loader Configuration */
+#ifdef CONFIG_TARGET_AM654_A53_EVM
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \
+ CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
+#else
+/*
+ * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
+ * possible (to allow the build to go through), as this directly affects
+ * our memory footprint. The less we use for BSS the more we have available
+ * for everything else.
+ */
+#define CONFIG_SPL_BSS_MAX_SIZE 0x5000
+/*
+ * Link BSS to be within SPL in a dedicated region located near the top of
+ * the MCU SRAM, this way making it available also before relocation. Note
+ * that we are not using the actual top of the MCU SRAM as there is a memory
+ * location filled in by the boot ROM that we want to read out without any
+ * interference from the C context.
+ */
+#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
+ CONFIG_SPL_BSS_MAX_SIZE)
+/* Set the stack right below the SPL BSS section */
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR
+/* Configure R5 SPL post-relocation malloc pool in DDR */
+#define CONFIG_SYS_SPL_MALLOC_START 0x84000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M
+#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
@@ -29,26 +55,26 @@
#endif
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \
- CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE - 4)
#define CONFIG_SYS_BOOTM_LEN SZ_64M
+#define PARTS_DEFAULT \
+ /* Linux partitions */ \
+ "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
+
/* U-Boot general configuration */
#define EXTRA_ENV_AM65X_BOARD_SETTINGS \
"findfdt=" \
- "if test $board_name = am65x; then " \
- "setenv name_fdt k3-am654-base-board.dtb; " \
- "else if test $name_fdt = undefined; then " \
- "echo WARNING: Could not determine device tree to use;"\
- "fi; fi; " \
- "setenv fdtfile ${name_fdt}\0" \
+ "setenv name_fdt k3-am654-base-board.dtb;" \
+ "setenv fdtfile ${name_fdt};" \
+ "setenv overlay_files ${name_overlays}\0" \
"loadaddr=0x80080000\0" \
"fdtaddr=0x82000000\0" \
+ "overlayaddr=0x83000000\0" \
"name_kern=Image\0" \
"console=ttyS2,115200n8\0" \
"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
- "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
+ "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" \
/* U-Boot MMC-specific configuration */
#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \
@@ -59,8 +85,17 @@
"rd_spec=-\0" \
"init_mmc=run args_all args_mmc\0" \
"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
+ "get_overlay_mmc=" \
+ "fdt address ${fdtaddr};" \
+ "fdt resize 0x100000;" \
+ "for overlay in $overlay_files;" \
+ "do;" \
+ "load mmc ${bootpart} ${overlayaddr} ${bootdir}/${overlay};" \
+ "fdt apply ${overlayaddr};" \
+ "done;\0" \
"get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
- "${bootdir}/${name_kern}\0"
+ "${bootdir}/${name_kern}\0" \
+ "partitions=" PARTS_DEFAULT
/* Incorporate settings into the U-Boot environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -68,6 +103,18 @@
EXTRA_ENV_AM65X_BOARD_SETTINGS \
EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC
+/* MMC ENV related defines */
+#ifdef CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 1
+#define CONFIG_ENV_SIZE (128 << 10)
+#define CONFIG_ENV_OFFSET 0x680000
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#endif
+
+#define CONFIG_SUPPORT_EMMC_BOOT
+
/* Now for the remaining common defines */
#include <configs/ti_armv7_common.h>
diff --git a/include/regmap.h b/include/regmap.h
index 3cd7a66..0854200 100644
--- a/include/regmap.h
+++ b/include/regmap.h
@@ -330,6 +330,8 @@
int regmap_init_mem_platdata(struct udevice *dev, fdt_val_t *reg, int count,
struct regmap **mapp);
+int regmap_init_mem_index(ofnode node, struct regmap **mapp, int index);
+
/**
* regmap_get_range() - Obtain the base memory address of a regmap range
*
diff --git a/include/sdhci.h b/include/sdhci.h
index eee493a..01addb7 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -144,7 +144,23 @@
#define SDHCI_ACMD12_ERR 0x3C
-/* 3E-3F reserved */
+#define SDHCI_HOST_CONTROL2 0x3E
+#define SDHCI_CTRL_UHS_MASK 0x0007
+#define SDHCI_CTRL_UHS_SDR12 0x0000
+#define SDHCI_CTRL_UHS_SDR25 0x0001
+#define SDHCI_CTRL_UHS_SDR50 0x0002
+#define SDHCI_CTRL_UHS_SDR104 0x0003
+#define SDHCI_CTRL_UHS_DDR50 0x0004
+#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
+#define SDHCI_CTRL_VDD_180 0x0008
+#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
+#define SDHCI_CTRL_DRV_TYPE_B 0x0000
+#define SDHCI_CTRL_DRV_TYPE_A 0x0010
+#define SDHCI_CTRL_DRV_TYPE_C 0x0020
+#define SDHCI_CTRL_DRV_TYPE_D 0x0030
+#define SDHCI_CTRL_EXEC_TUNING 0x0040
+#define SDHCI_CTRL_TUNED_CLK 0x0080
+#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
@@ -247,7 +263,7 @@
#endif
int (*get_cd)(struct sdhci_host *host);
void (*set_control_reg)(struct sdhci_host *host);
- void (*set_ios_post)(struct sdhci_host *host);
+ int (*set_ios_post)(struct sdhci_host *host);
void (*set_clock)(struct sdhci_host *host, u32 div);
int (*platform_execute_tuning)(struct mmc *host, u8 opcode);
void (*set_delay)(struct sdhci_host *host);
@@ -467,9 +483,11 @@
int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min);
#endif /* !CONFIG_BLK */
+void sdhci_set_uhs_timing(struct sdhci_host *host);
#ifdef CONFIG_DM_MMC
/* Export the operations to drivers */
int sdhci_probe(struct udevice *dev);
+int sdhci_set_clock(struct mmc *mmc, unsigned int clock);
extern const struct dm_mmc_ops sdhci_ops;
#else
#endif
diff --git a/include/spl.h b/include/spl.h
index a9aaef3..a90f971 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -109,6 +109,15 @@
binman_sym_extern(ulong, u_boot_any, image_pos);
/**
+ * spl_load_simple_fit_skip_processing() - Hook to allow skipping the FIT
+ * image processing during spl_load_simple_fit().
+ *
+ * Return true to skip FIT processing, false to preserve the full code flow
+ * of spl_load_simple_fit().
+ */
+bool spl_load_simple_fit_skip_processing(void);
+
+/**
* spl_load_simple_fit() - Loads a fit image from a device.
* @spl_image: Image description to set up
* @info: Structure containing the information required to load data.
@@ -331,6 +340,23 @@
struct spl_boot_device *bootdev);
/**
+ * spl_mmc_load() - Load an image file from MMC/SD media
+ *
+ * @param spl_image Image data filled in by loading process
+ * @param bootdev Describes which device to load from
+ * @param filename Name of file to load (in FS mode)
+ * @param raw_part Partition to load from (in RAW mode)
+ * @param raw_sect Sector to load from (in RAW mode)
+ *
+ * @return 0 on success, otherwise error code
+ */
+int spl_mmc_load(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
+ const char *filename,
+ int raw_part,
+ unsigned long raw_sect);
+
+/**
* spl_invoke_atf - boot using an ARM trusted firmware image
*/
void spl_invoke_atf(struct spl_image_info *spl_image);