arm: Remove zipitz2 board
Per discussion on the list, drop this board again.
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 01ff57c..0e82cf1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1410,10 +1410,6 @@
bool "Support h2200"
select CPU_PXA
-config TARGET_ZIPITZ2
- bool "Support zipitz2"
- select CPU_PXA
-
config TARGET_COLIBRI_PXA270
bool "Support colibri_pxa270"
select CPU_PXA
@@ -1727,7 +1723,6 @@
source "board/xilinx/Kconfig"
source "board/xilinx/zynq/Kconfig"
source "board/xilinx/zynqmp/Kconfig"
-source "board/zipitz2/Kconfig"
source "arch/arm/Kconfig.debug"
diff --git a/board/zipitz2/Kconfig b/board/zipitz2/Kconfig
deleted file mode 100644
index c663504..0000000
--- a/board/zipitz2/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_ZIPITZ2
-
-config SYS_BOARD
- default "zipitz2"
-
-config SYS_CONFIG_NAME
- default "zipitz2"
-
-endif
diff --git a/board/zipitz2/MAINTAINERS b/board/zipitz2/MAINTAINERS
deleted file mode 100644
index e027cd3..0000000
--- a/board/zipitz2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ZIPITZ2 BOARD
-M: Vasily Khoruzhick <anarsoul@gmail.com>
-S: Maintained
-F: board/zipitz2/
-F: include/configs/zipitz2.h
-F: configs/zipitz2_defconfig
diff --git a/board/zipitz2/Makefile b/board/zipitz2/Makefile
deleted file mode 100644
index 2bbe436..0000000
--- a/board/zipitz2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2009
-# Marek Vasut <marek.vasut@gmail.com>
-#
-# Heavily based on pxa255_idp platform
-
-obj-y := zipitz2.o
diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
deleted file mode 100644
index 9208c88..0000000
--- a/board/zipitz2/zipitz2.c
+++ /dev/null
@@ -1,219 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2009
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * Heavily based on pxa255_idp platform
- */
-
-#include <common.h>
-#include <command.h>
-#include <serial.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-#include <spi.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_CMD_SPI
-void lcd_start(void);
-#else
-inline void lcd_start(void) {};
-#endif
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
- /* arch number of Z2 */
- gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xa0000100;
-
- /* Enable LCD */
- lcd_start();
-
- return 0;
-}
-
-int dram_init(void)
-{
- pxa2xx_dram_init();
- gd->ram_size = PHYS_SDRAM_1_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
- /* enable port 2 */
- writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
- UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- return 0;
-}
-
-void usb_board_stop(void)
-{
-}
-#endif
-
-int dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
- pxa_mmc_register(0);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_SPI
-
-struct {
- unsigned char reg;
- unsigned short data;
- unsigned char mdelay;
-} lcd_data[] = {
- { 0x07, 0x0000, 0 },
- { 0x13, 0x0000, 10 },
- { 0x11, 0x3004, 0 },
- { 0x14, 0x200F, 0 },
- { 0x10, 0x1a20, 0 },
- { 0x13, 0x0040, 50 },
- { 0x13, 0x0060, 0 },
- { 0x13, 0x0070, 200 },
- { 0x01, 0x0127, 0 },
- { 0x02, 0x0700, 0 },
- { 0x03, 0x1030, 0 },
- { 0x08, 0x0208, 0 },
- { 0x0B, 0x0620, 0 },
- { 0x0C, 0x0110, 0 },
- { 0x30, 0x0120, 0 },
- { 0x31, 0x0127, 0 },
- { 0x32, 0x0000, 0 },
- { 0x33, 0x0503, 0 },
- { 0x34, 0x0727, 0 },
- { 0x35, 0x0124, 0 },
- { 0x36, 0x0706, 0 },
- { 0x37, 0x0701, 0 },
- { 0x38, 0x0F00, 0 },
- { 0x39, 0x0F00, 0 },
- { 0x40, 0x0000, 0 },
- { 0x41, 0x0000, 0 },
- { 0x42, 0x013f, 0 },
- { 0x43, 0x0000, 0 },
- { 0x44, 0x013f, 0 },
- { 0x45, 0x0000, 0 },
- { 0x46, 0xef00, 0 },
- { 0x47, 0x013f, 0 },
- { 0x48, 0x0000, 0 },
- { 0x07, 0x0015, 30 },
- { 0x07, 0x0017, 0 },
- { 0x20, 0x0000, 0 },
- { 0x21, 0x0000, 0 },
- { 0x22, 0x0000, 0 },
-};
-
-void zipitz2_spi_sda(int set)
-{
- /* GPIO 13 */
- if (set)
- writel((1 << 13), GPSR0);
- else
- writel((1 << 13), GPCR0);
-}
-
-void zipitz2_spi_scl(int set)
-{
- /* GPIO 22 */
- if (set)
- writel((1 << 22), GPCR0);
- else
- writel((1 << 22), GPSR0);
-}
-
-unsigned char zipitz2_spi_read(void)
-{
- /* GPIO 40 */
- return !!(readl(GPLR1) & (1 << 8));
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- /* Always valid */
- return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- /* GPIO 88 low */
- writel((1 << 24), GPCR2);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- /* GPIO 88 high */
- writel((1 << 24), GPSR2);
-}
-
-void lcd_start(void)
-{
- int i;
- unsigned char reg[3] = { 0x74, 0x00, 0 };
- unsigned char data[3] = { 0x76, 0, 0 };
- unsigned char dummy[3] = { 0, 0, 0 };
-
- /* PWM2 AF */
- writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
- /* Enable clock to all PWM */
- writel(readl(CKEN) | 0x3, CKEN);
- /* Configure PWM2 */
- writel(0x4f, PWM_CTRL2);
- writel(0x2ff, PWM_PWDUTY2);
- writel(792, PWM_PERVAL2);
-
- /* Toggle the reset pin to reset the LCD */
- writel((1 << 19), GPSR0);
- udelay(100000);
- writel((1 << 19), GPCR0);
- udelay(20000);
- writel((1 << 19), GPSR0);
- udelay(20000);
-
- /* Program the LCD init sequence */
- for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) {
- reg[0] = 0x74;
- reg[1] = 0x0;
- reg[2] = lcd_data[i].reg;
- spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
-
- data[0] = 0x76;
- data[1] = lcd_data[i].data >> 8;
- data[2] = lcd_data[i].data & 0xff;
- spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
-
- if (lcd_data[i].mdelay)
- udelay(lcd_data[i].mdelay * 1000);
- }
-
- writel((1 << 11), GPSR0);
-}
-#endif
diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig
deleted file mode 100644
index 509adcf..0000000
--- a/configs/zipitz2_defconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_ZIPITZ2=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=tty0 console=ttyS2,115200 fbcon=rotate:3"
-# CONFIG_CONSOLE_MUX is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="$ "
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-# CONFIG_NET is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_CONS_INDEX=2
-CONFIG_PXA_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
-CONFIG_LZMA=y
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
deleted file mode 100644
index 24fea68..0000000
--- a/include/configs/zipitz2.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Aeronix Zipit Z2 configuration file
- *
- * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
-
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_PREBOOT
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_ADDR 0x40000
-#define CONFIG_ENV_SIZE 0x10000
-
-#define CONFIG_SYS_MALLOC_LEN (128*1024)
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_BOOTCOMMAND \
- "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
- "then " \
- "source 0xa0000000; " \
- "else " \
- "bootm 0x50000; " \
- "fi; "
-#define CONFIG_TIMESTAMP
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-/*
- * Serial Console Configuration
- * STUART - the lower serial port on Colibri board
- */
-#define CONFIG_STUART 1
-
-/*
- * Bootloader Components Configuration
- */
-
-/*
- * MMC Card Configuration
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_PXA_MMC_GENERIC
-#define CONFIG_SYS_MMC_BASE 0xF0000000
-#endif
-
-/*
- * SPI and LCD
- */
-#ifdef CONFIG_CMD_SPI
-#define CONFIG_SOFT_SPI
-#define CONFIG_LCD_ROTATION
-#define CONFIG_PXA_LCD
-#define CONFIG_LMS283GF05
-
-#define SPI_DELAY udelay(10)
-#define SPI_SDA(val) zipitz2_spi_sda(val)
-#define SPI_SCL(val) zipitz2_spi_scl(val)
-#define SPI_READ zipitz2_spi_read()
-#ifndef __ASSEMBLY__
-void zipitz2_spi_sda(int);
-void zipitz2_spi_scl(int);
-unsigned char zipitz2_spi_read(void);
-#endif
-#endif
-
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
-/*
- * Clock Configuration
- */
-#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
-
-/*
- * SRAM Map
- */
-#define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */
-#define PHYS_SRAM_SIZE 0x00040000 /* 256k */
-
-/*
- * DRAM Map
- */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
-#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
-
-/*
- * NOR FLASH
- */
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
-#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
-#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GAFR0_L_VAL 0x02000140
-#define CONFIG_SYS_GAFR0_U_VAL 0x59188000
-#define CONFIG_SYS_GAFR1_L_VAL 0x63900002
-#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950
-#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL 0x29000308
-#define CONFIG_SYS_GAFR3_L_VAL 0x54000000
-#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5
-#define CONFIG_SYS_GPCR0_VAL 0x00000000
-#define CONFIG_SYS_GPCR1_VAL 0x00000020
-#define CONFIG_SYS_GPCR2_VAL 0x00000000
-#define CONFIG_SYS_GPCR3_VAL 0x00000000
-#define CONFIG_SYS_GPDR0_VAL 0xdafcee00
-#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab
-#define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff
-#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a
-#define CONFIG_SYS_GPSR0_VAL 0x06080400
-#define CONFIG_SYS_GPSR1_VAL 0x007f0000
-#define CONFIG_SYS_GPSR2_VAL 0x032a0000
-#define CONFIG_SYS_GPSR3_VAL 0x00000180
-
-#define CONFIG_SYS_PSSR_VAL 0x30
-
-/*
- * Clock settings
- */
-#define CONFIG_SYS_CKEN 0x00511220
-#define CONFIG_SYS_CCCR 0x00000190
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8
-#define CONFIG_SYS_MSC1_VAL 0x0000ccd1
-#define CONFIG_SYS_MSC2_VAL 0x0000b884
-#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9
-#define CONFIG_SYS_MDREFR_VAL 0x2011a01e
-#define CONFIG_SYS_MDMRS_VAL 0x00000000
-#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
-#define CONFIG_SYS_SXCNFG_VAL 0x40044004
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000001
-#define CONFIG_SYS_MCMEM0_VAL 0x00014307
-#define CONFIG_SYS_MCMEM1_VAL 0x00014307
-#define CONFIG_SYS_MCATT0_VAL 0x0001c787
-#define CONFIG_SYS_MCATT1_VAL 0x0001c787
-#define CONFIG_SYS_MCIO0_VAL 0x0001430f
-#define CONFIG_SYS_MCIO1_VAL 0x0001430f
-
-#include "pxa-common.h"
-
-#endif /* __CONFIG_H */