Add MCF5282 support (without preloader)
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
index a5c50af..b8b82d0 100644
--- a/cpu/mcf52x2/fec.c
+++ b/cpu/mcf52x2/fec.c
@@ -200,7 +200,9 @@
int eth_init (bd_t * bd)
{
-
+#ifndef CFG_ENET_BD_BASE
+ DECLARE_GLOBAL_DATA_PTR;
+#endif
int i;
volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
@@ -242,9 +244,13 @@
/* Clear multicast address hash table
*/
+#ifdef CONFIG_M5282
+ fecp->fec_ihash_table_high = 0;
+ fecp->fec_ihash_table_low = 0;
+#else
fecp->fec_hash_table_high = 0;
fecp->fec_hash_table_low = 0;
-
+#endif
/* Set maximum receive buffer size.
*/
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
@@ -256,7 +262,16 @@
txIdx = 0;
if (!rtx) {
+#ifdef CFG_ENET_BD_BASE
rtx = (RTXBD *) CFG_ENET_BD_BASE;
+#else
+ rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off -
+ (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t)
+ +0xFF)
+ & ~0xFF)
+ );
+ debug("set ENET_DB_BASE to %lX\n",(long) rtx);
+#endif
}
/*
@@ -294,11 +309,13 @@
fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
#else /* Half duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
+ fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */
+ fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
fecp->fec_x_cntrl = 0;
#endif
/* Set MII speed */
- fecp->fec_mii_speed = 0x0e;
+ fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10;
+ fecp->fec_mii_speed *= 2;
/* Configure port B for MII.
*/
@@ -402,7 +419,7 @@
*/
udelay (10000); /* wait 10ms */
}
- for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+ for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) {
phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1));
#ifdef ET_DEBUG
printf ("PHY type 0x%x pass %d type ", phytype, pass);