imx8ulp_evk: disable overflow of port0 for LPAV
Bit0: Port 0 behavior when bandwidth maximized. Set to 1 to allow overflow
With overflow set, we see some issue that A35 may not able to get enough
bandwidth and A35 will report hrtimer takes too much time, workqueue
lockup. With overflow cleared, the issues are gone.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/board/freescale/imx8ulp_evk/lpddr4_timing.c b/board/freescale/imx8ulp_evk/lpddr4_timing.c
index e9edb87..6d28053 100644
--- a/board/freescale/imx8ulp_evk/lpddr4_timing.c
+++ b/board/freescale/imx8ulp_evk/lpddr4_timing.c
@@ -396,7 +396,7 @@
{ 0x2e0608e0, 0x30f0f }, /* 568 */
{ 0x2e0608e4, 0xffffffff }, /* 569 */
{ 0x2e0608e8, 0x32070f0f }, /* 570 */
- { 0x2e0608ec, 0x1320001 }, /* 571 */
+ { 0x2e0608ec, 0x1320000 }, /* 571 */
{ 0x2e0608f0, 0x13200 }, /* 572 */
{ 0x2e0608f4, 0x132 }, /* 573 */
{ 0x2e0608fc, 0x1b1b0000 }, /* 575 */
diff --git a/board/freescale/imx8ulp_evk/lpddr4_timing_266.c b/board/freescale/imx8ulp_evk/lpddr4_timing_266.c
index 9728a25..7945760 100644
--- a/board/freescale/imx8ulp_evk/lpddr4_timing_266.c
+++ b/board/freescale/imx8ulp_evk/lpddr4_timing_266.c
@@ -395,7 +395,7 @@
{ 0x2e0608e0, 0x30f0f }, /* 568 */
{ 0x2e0608e4, 0xffffffff }, /* 569 */
{ 0x2e0608e8, 0x32070f0f }, /* 570 */
- { 0x2e0608ec, 0x1320001 }, /* 571 */
+ { 0x2e0608ec, 0x1320000 }, /* 571 */
{ 0x2e0608f0, 0x13200 }, /* 572 */
{ 0x2e0608f4, 0x132 }, /* 573 */
{ 0x2e0608fc, 0x1d1b0000 }, /* 575 */