Merge git://git.denx.de/u-boot-fsl-qoriq
diff --git a/arch/arm/cpu/armv7/ls102xa/psci.S b/arch/arm/cpu/armv7/ls102xa/psci.S
index f9b26b4..8f38680 100644
--- a/arch/arm/cpu/armv7/ls102xa/psci.S
+++ b/arch/arm/cpu/armv7/ls102xa/psci.S
@@ -12,19 +12,102 @@
#include <asm/arch-armv7/generictimer.h>
#include <asm/psci.h>
+#define RCPM_TWAITSR 0x04C
+
#define SCFG_CORE0_SFT_RST 0x130
#define SCFG_CORESRENCR 0x204
-#define DCFG_CCSR_BRR 0x0E4
-#define DCFG_CCSR_SCRATCHRW1 0x200
+#define DCFG_CCSR_RSTCR 0x0B0
+#define DCFG_CCSR_RSTCR_RESET_REQ 0x2
+#define DCFG_CCSR_BRR 0x0E4
+#define DCFG_CCSR_SCRATCHRW1 0x200
+
+#define PSCI_FN_PSCI_VERSION_FEATURE_MASK 0x0
+#define PSCI_FN_CPU_SUSPEND_FEATURE_MASK 0x0
+#define PSCI_FN_CPU_OFF_FEATURE_MASK 0x0
+#define PSCI_FN_CPU_ON_FEATURE_MASK 0x0
+#define PSCI_FN_AFFINITY_INFO_FEATURE_MASK 0x0
+#define PSCI_FN_SYSTEM_OFF_FEATURE_MASK 0x0
+#define PSCI_FN_SYSTEM_RESET_FEATURE_MASK 0x0
.pushsection ._secure.text, "ax"
.arch_extension sec
+ .align 5
+
#define ONE_MS (GENERIC_TIMER_CLK / 1000)
#define RESET_WAIT (30 * ONE_MS)
+.globl psci_version
+psci_version:
+ movw r0, #0
+ movt r0, #1
+
+ bx lr
+
+_ls102x_psci_supported_table:
+ .word ARM_PSCI_0_2_FN_PSCI_VERSION
+ .word PSCI_FN_PSCI_VERSION_FEATURE_MASK
+ .word ARM_PSCI_0_2_FN_CPU_SUSPEND
+ .word PSCI_FN_CPU_SUSPEND_FEATURE_MASK
+ .word ARM_PSCI_0_2_FN_CPU_OFF
+ .word PSCI_FN_CPU_OFF_FEATURE_MASK
+ .word ARM_PSCI_0_2_FN_CPU_ON
+ .word PSCI_FN_CPU_ON_FEATURE_MASK
+ .word ARM_PSCI_0_2_FN_AFFINITY_INFO
+ .word PSCI_FN_AFFINITY_INFO_FEATURE_MASK
+ .word ARM_PSCI_0_2_FN_SYSTEM_OFF
+ .word PSCI_FN_SYSTEM_OFF_FEATURE_MASK
+ .word ARM_PSCI_0_2_FN_SYSTEM_RESET
+ .word PSCI_FN_SYSTEM_RESET_FEATURE_MASK
+ .word 0
+ .word ARM_PSCI_RET_NI
+
+.globl psci_features
+psci_features:
+ adr r2, _ls102x_psci_supported_table
+1: ldr r3, [r2]
+ cmp r3, #0
+ beq out_psci_features
+ cmp r1, r3
+ addne r2, r2, #8
+ bne 1b
+
+out_psci_features:
+ ldr r0, [r2, #4]
+ bx lr
+
+@ r0: return value ARM_PSCI_RET_SUCCESS or ARM_PSCI_RET_INVAL
+@ r1: input target CPU ID in MPIDR format, original value in r1 may be dropped
+@ r4: output validated CPU ID if ARM_PSCI_RET_SUCCESS returns, meaningless for
+@ ARM_PSCI_RET_INVAL,suppose caller saves r4 before calling
+LENTRY(psci_check_target_cpu_id)
+ @ Get the real CPU number
+ and r4, r1, #0xff
+ mov r0, #ARM_PSCI_RET_INVAL
+
+ @ Bit[31:24], bits must be zero.
+ tst r1, #0xff000000
+ bxne lr
+
+ @ Affinity level 2 - Cluster: only one cluster in LS1021xa.
+ tst r1, #0xff0000
+ bxne lr
+
+ @ Affinity level 1 - Processors: should be in 0xf00 format.
+ lsr r1, r1, #8
+ teq r1, #0xf
+ bxne lr
+
+ @ Affinity level 0 - CPU: only 0, 1 are valid in LS1021xa.
+ cmp r4, #2
+ bxge lr
+
+ mov r0, #ARM_PSCI_RET_SUCCESS
+ bx lr
+ENDPROC(psci_check_target_cpu_id)
+
@ r1 = target CPU
@ r2 = target PC
.globl psci_cpu_on
@@ -33,7 +116,9 @@
@ Clear and Get the correct CPU number
@ r1 = 0xf01
- and r4, r1, #0xff
+ bl psci_check_target_cpu_id
+ cmp r0, #ARM_PSCI_RET_INVAL
+ beq out_psci_cpu_on
mov r0, r4
mov r1, r2
@@ -101,6 +186,7 @@
@ Return
mov r0, #ARM_PSCI_RET_SUCCESS
+out_psci_cpu_on:
pop {r4, r5, r6, lr}
bx lr
@@ -111,4 +197,50 @@
1: wfi
b 1b
+.globl psci_affinity_info
+psci_affinity_info:
+ push {lr}
+
+ mov r0, #ARM_PSCI_RET_INVAL
+
+ @ Verify Affinity level
+ cmp r2, #0
+ bne out_affinity_info
+
+ bl psci_check_target_cpu_id
+ cmp r0, #ARM_PSCI_RET_INVAL
+ beq out_affinity_info
+ mov r1, r4
+
+ @ Get RCPM base address
+ movw r4, #(CONFIG_SYS_FSL_RCPM_ADDR & 0xffff)
+ movt r4, #(CONFIG_SYS_FSL_RCPM_ADDR >> 16)
+
+ mov r0, #PSCI_AFFINITY_LEVEL_ON
+
+ @ Detect target CPU state
+ ldr r2, [r4, #RCPM_TWAITSR]
+ rev r2, r2
+ lsr r2, r2, r1
+ ands r2, r2, #1
+ beq out_affinity_info
+
+ mov r0, #PSCI_AFFINITY_LEVEL_OFF
+
+out_affinity_info:
+ pop {pc}
+
+.globl psci_system_reset
+psci_system_reset:
+ @ Get DCFG base address
+ movw r1, #(CONFIG_SYS_FSL_GUTS_ADDR & 0xffff)
+ movt r1, #(CONFIG_SYS_FSL_GUTS_ADDR >> 16)
+
+ mov r2, #DCFG_CCSR_RSTCR_RESET_REQ
+ rev r2, r2
+ str r2, [r1, #DCFG_CCSR_RSTCR]
+
+1: wfi
+ b 1b
+
.popsection
diff --git a/arch/arm/cpu/armv7/psci.S b/arch/arm/cpu/armv7/psci.S
index 350b75c..f80f6e2 100644
--- a/arch/arm/cpu/armv7/psci.S
+++ b/arch/arm/cpu/armv7/psci.S
@@ -46,20 +46,62 @@
ENDPROC(default_psci_vector)
.weak default_psci_vector
+ENTRY(psci_version)
ENTRY(psci_cpu_suspend)
ENTRY(psci_cpu_off)
ENTRY(psci_cpu_on)
+ENTRY(psci_affinity_info)
ENTRY(psci_migrate)
+ENTRY(psci_migrate_info_type)
+ENTRY(psci_migrate_info_up_cpu)
+ENTRY(psci_system_off)
+ENTRY(psci_system_reset)
+ENTRY(psci_features)
+ENTRY(psci_cpu_freeze)
+ENTRY(psci_cpu_default_suspend)
+ENTRY(psci_node_hw_state)
+ENTRY(psci_system_suspend)
+ENTRY(psci_set_suspend_mode)
+ENTRY(psi_stat_residency)
+ENTRY(psci_stat_count)
mov r0, #ARM_PSCI_RET_NI @ Return -1 (Not Implemented)
mov pc, lr
+ENDPROC(psci_stat_count)
+ENDPROC(psi_stat_residency)
+ENDPROC(psci_set_suspend_mode)
+ENDPROC(psci_system_suspend)
+ENDPROC(psci_node_hw_state)
+ENDPROC(psci_cpu_default_suspend)
+ENDPROC(psci_cpu_freeze)
+ENDPROC(psci_features)
+ENDPROC(psci_system_reset)
+ENDPROC(psci_system_off)
+ENDPROC(psci_migrate_info_up_cpu)
+ENDPROC(psci_migrate_info_type)
ENDPROC(psci_migrate)
+ENDPROC(psci_affinity_info)
ENDPROC(psci_cpu_on)
ENDPROC(psci_cpu_off)
ENDPROC(psci_cpu_suspend)
+ENDPROC(psci_version)
+.weak psci_version
.weak psci_cpu_suspend
.weak psci_cpu_off
.weak psci_cpu_on
+.weak psci_affinity_info
.weak psci_migrate
+.weak psci_migrate_info_type
+.weak psci_migrate_info_up_cpu
+.weak psci_system_off
+.weak psci_system_reset
+.weak psci_features
+.weak psci_cpu_freeze
+.weak psci_cpu_default_suspend
+.weak psci_node_hw_state
+.weak psci_system_suspend
+.weak psci_set_suspend_mode
+.weak psi_stat_residency
+.weak psci_stat_count
_psci_table:
.word ARM_PSCI_FN_CPU_SUSPEND
@@ -70,6 +112,42 @@
.word psci_cpu_on
.word ARM_PSCI_FN_MIGRATE
.word psci_migrate
+ .word ARM_PSCI_0_2_FN_PSCI_VERSION
+ .word psci_version
+ .word ARM_PSCI_0_2_FN_CPU_SUSPEND
+ .word psci_cpu_suspend
+ .word ARM_PSCI_0_2_FN_CPU_OFF
+ .word psci_cpu_off
+ .word ARM_PSCI_0_2_FN_CPU_ON
+ .word psci_cpu_on
+ .word ARM_PSCI_0_2_FN_AFFINITY_INFO
+ .word psci_affinity_info
+ .word ARM_PSCI_0_2_FN_MIGRATE
+ .word psci_migrate
+ .word ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE
+ .word psci_migrate_info_type
+ .word ARM_PSCI_0_2_FN_MIGRATE_INFO_UP_CPU
+ .word psci_migrate_info_up_cpu
+ .word ARM_PSCI_0_2_FN_SYSTEM_OFF
+ .word psci_system_off
+ .word ARM_PSCI_0_2_FN_SYSTEM_RESET
+ .word psci_system_reset
+ .word ARM_PSCI_1_0_FN_PSCI_FEATURES
+ .word psci_features
+ .word ARM_PSCI_1_0_FN_CPU_FREEZE
+ .word psci_cpu_freeze
+ .word ARM_PSCI_1_0_FN_CPU_DEFAULT_SUSPEND
+ .word psci_cpu_default_suspend
+ .word ARM_PSCI_1_0_FN_NODE_HW_STATE
+ .word psci_node_hw_state
+ .word ARM_PSCI_1_0_FN_SYSTEM_SUSPEND
+ .word psci_system_suspend
+ .word ARM_PSCI_1_0_FN_SET_SUSPEND_MODE
+ .word psci_set_suspend_mode
+ .word ARM_PSCI_1_0_FN_STAT_RESIDENCY
+ .word psi_stat_residency
+ .word ARM_PSCI_1_0_FN_STAT_COUNT
+ .word psci_stat_count
.word 0
.word 0
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index bcf6b48..8c1317f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -33,3 +33,7 @@
ifneq ($(CONFIG_LS1012A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls1012a_serdes.o
endif
+
+ifneq ($(CONFIG_LS1046A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
+endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 7a2ec6b..e12b773 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -145,11 +145,14 @@
set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
MEMORY_ATTRIBUTES);
/*
- * MMU is already enabled, just need to invalidate TLB to load the
+ * EL3 MMU is already enabled, just need to invalidate TLB to load the
* new table. The new table is compatible with the current table, if
* MMU somehow walks through the new table before invalidation TLB,
* it still works. So we don't need to turn off MMU here.
+ * When EL2 MMU table is created by calling this function, MMU needs
+ * to be enabled.
*/
+ set_sctlr(get_sctlr() | CR_M);
}
u64 get_page_table_size(void)
@@ -309,7 +312,8 @@
printf("CPU%d(%s):%-4s MHz ", core,
type == TY_ITYP_VER_A7 ? "A7 " :
(type == TY_ITYP_VER_A53 ? "A53" :
- (type == TY_ITYP_VER_A57 ? "A57" : " ")),
+ (type == TY_ITYP_VER_A57 ? "A57" :
+ (type == TY_ITYP_VER_A72 ? "A72" : " "))),
strmhz(buf, sysinfo.freq_processor[core]));
}
printf("\n Bus: %-4s MHz ",
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
index 8eee016..f7b949a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
@@ -3,6 +3,7 @@
1. LS1043A
2. LS2080A
3. LS1012A
+ 4. LS1046A
LS1043A
---------
@@ -127,3 +128,44 @@
- Two WatchDog timers
- ARM generic timer
- QorIQ platform's trust architecture 2.1
+
+LS1046A
+--------
+The LS1046A integrated multicore processor combines four ARM Cortex-A72
+processor cores with datapath acceleration optimized for L2/3 packet
+processing, single pass security offload and robust traffic management
+and quality of service.
+
+The LS1046A SoC includes the following function and features:
+ - Four 64-bit ARM Cortex-A72 CPUs
+ - 2 MB unified L2 Cache
+ - One 64-bit DDR4 SDRAM memory controllers with ECC and interleaving
+ support
+ - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
+ the following functions:
+ - Packet parsing, classification, and distribution (FMan)
+ - Queue management for scheduling, packet sequencing, and congestion
+ management (QMan)
+ - Hardware buffer management for buffer allocation and de-allocation (BMan)
+ - Cryptography acceleration (SEC)
+ - Two Configurable x4 SerDes
+ - Two PLLs per four-lane SerDes
+ - Support for 10G operation
+ - Ethernet interfaces by FMan
+ - Up to 2 x XFI supporting 10G interface (MAC 9, 10)
+ - Up to 1 x QSGMII (MAC 5, 6, 10, 1)
+ - Up to 4 x SGMII supporting 1000Mbps (MAC 5, 6, 9, 10)
+ - Up to 3 x SGMII supporting 2500Mbps (MAC 5, 9, 10)
+ - Up to 2 x RGMII supporting 1000Mbps (MAC 3, 4)
+ - High-speed peripheral interfaces
+ - Three PCIe 3.0 controllers, one supporting x4 operation
+ - One serial ATA (SATA 3.0) controllers
+ - Additional peripheral interfaces
+ - Three high-speed USB 3.0 controllers with integrated PHY
+ - Enhanced secure digital host controller (eSDXC/eMMC)
+ - Quad Serial Peripheral Interface (QSPI) Controller
+ - Serial peripheral interface (SPI) controller
+ - Four I2C controllers
+ - Two DUARTs
+ - Integrated flash controller (IFC) supporting NAND and NOR flash
+ - QorIQ platform's trust architecture 2.1
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
index fe3444a..f73092a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
@@ -13,6 +13,9 @@
#ifdef CONFIG_SYS_FSL_SRDS_1
static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
int is_serdes_configured(enum srds_prtcl device)
{
@@ -21,6 +24,9 @@
#ifdef CONFIG_SYS_FSL_SRDS_1
ret |= serdes1_prtcl_map[device];
#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+ ret |= serdes2_prtcl_map[device];
+#endif
return !!ret;
}
@@ -38,6 +44,12 @@
cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
break;
#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+ case FSL_SRDS_2:
+ cfg &= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
+ cfg >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ break;
+#endif
default:
printf("invalid SerDes%d\n", sd);
break;
@@ -114,4 +126,11 @@
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT,
serdes1_prtcl_map);
#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+ serdes_init(FSL_SRDS_2,
+ CONFIG_SYS_FSL_SERDES_ADDR,
+ FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK,
+ FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT,
+ serdes2_prtcl_map);
+#endif
}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
index d0dc58d..8922197 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -107,6 +107,12 @@
case 3:
sys_info->freq_fman[0] = freq_c_pll[0] / 3;
break;
+ case 4:
+ sys_info->freq_fman[0] = freq_c_pll[0] / 4;
+ break;
+ case 5:
+ sys_info->freq_fman[0] = sys_info->freq_systembus;
+ break;
case 6:
sys_info->freq_fman[0] = freq_c_pll[1] / 2;
break;
@@ -124,8 +130,23 @@
#ifdef CONFIG_FSL_ESDHC
#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
rcw_tmp = in_be32(&gur->rcwsr[15]);
- rcw_tmp = (rcw_tmp & HWA_CGA_M2_CLK_SEL) >> HWA_CGA_M2_CLK_SHIFT;
- sys_info->freq_sdhc = freq_c_pll[1] / rcw_tmp;
+ switch ((rcw_tmp & HWA_CGA_M2_CLK_SEL) >> HWA_CGA_M2_CLK_SHIFT) {
+ case 1:
+ sys_info->freq_sdhc = freq_c_pll[1];
+ break;
+ case 2:
+ sys_info->freq_sdhc = freq_c_pll[1] / 2;
+ break;
+ case 3:
+ sys_info->freq_sdhc = freq_c_pll[1] / 3;
+ break;
+ case 6:
+ sys_info->freq_sdhc = freq_c_pll[0] / 2;
+ break;
+ default:
+ printf("Error: Unknown ESDHC clock select!\n");
+ break;
+ }
#else
sys_info->freq_sdhc = sys_info->freq_systembus;
#endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c
new file mode 100644
index 0000000..1da6b71
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_lsch2.h>
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {0x3333, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6} },
+ {0x1133, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6} },
+ {0x1333, {XFI_FM1_MAC9, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6} },
+ {0x2333, {SGMII_2500_FM1_DTSEC9, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6} },
+ {0x2233, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC10,
+ SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {0x1040, {XFI_FM1_MAC9, NONE, QSGMII_FM1_A, NONE} },
+ {0x2040, {SGMII_2500_FM1_DTSEC9, NONE, QSGMII_FM1_A, NONE} },
+ {0x1163, {XFI_FM1_MAC9, XFI_FM1_MAC10, PCIE1, SGMII_FM1_DTSEC6} },
+ {0x2263, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC10, PCIE1,
+ SGMII_FM1_DTSEC6} },
+ {0x3363, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, PCIE1,
+ SGMII_FM1_DTSEC6} },
+ {0x2223, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC10,
+ SGMII_2500_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+ {}
+};
+
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {0x8888, {PCIE1, PCIE1, PCIE1, PCIE1} },
+ {0x5559, {PCIE1, PCIE2, PCIE3, SATA1} },
+ {0x5577, {PCIE1, PCIE2, PCIE3, PCIE3} },
+ {0x5506, {PCIE1, PCIE2, NONE, PCIE3} },
+ {0x0506, {NONE, PCIE2, NONE, PCIE3} },
+ {0x0559, {NONE, PCIE2, PCIE3, SATA1} },
+ {0x5A59, {PCIE1, SGMII_FM1_DTSEC2, PCIE3, SATA1} },
+ {0x5A06, {PCIE1, SGMII_FM1_DTSEC2, NONE, PCIE3} },
+ {}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 44fe0c0..b0ad4b4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -149,43 +149,43 @@
#define CONFIG_ARM_ERRATA_833471
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
-#elif defined(CONFIG_LS1043A)
-#define CONFIG_MAX_CPUS 4
+#elif defined(CONFIG_FSL_LSCH2)
#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FSL_SEC_COMPAT 5
+#define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */
+#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00200000 /* 2M */
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0x01000000
+
+#define CONFIG_SYS_FSL_CCSR_SCFG_BE
+#define CONFIG_SYS_FSL_ESDHC_BE
+#define CONFIG_SYS_FSL_WDOG_BE
+#define CONFIG_SYS_FSL_DSPI_BE
+#define CONFIG_SYS_FSL_QSPI_BE
+#define CONFIG_SYS_FSL_CCSR_GUR_BE
+#define CONFIG_SYS_FSL_PEX_LUT_BE
+#define CONFIG_SYS_FSL_SEC_BE
+
+#define CONFIG_SYS_FSL_SRDS_1
+/* SoC related */
+#ifdef CONFIG_LS1043A
+#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 7
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0x01000000
-#define CONFIG_SYS_FSL_SEC_COMPAT 5
-#define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */
-#define CONFIG_SYS_FSL_OCRAM_SIZE 0x200000 /* 2 MiB */
#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
-#define CONFIG_SYS_FSL_CCSR_GUR_BE
-#define CONFIG_SYS_FSL_CCSR_SCFG_BE
-#define CONFIG_SYS_FSL_IFC_BE
-#define CONFIG_SYS_FSL_ESDHC_BE
-#define CONFIG_SYS_FSL_WDOG_BE
-#define CONFIG_SYS_FSL_DSPI_BE
-#define CONFIG_SYS_FSL_QSPI_BE
-#define CONFIG_SYS_FSL_PEX_LUT_BE
-
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
-#define SRDS_MAX_LANES 4
-#define CONFIG_SYS_FSL_SRDS_1
-#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
-
+#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_SFP_VER_3_2
#define CONFIG_SYS_FSL_SEC_MON_BE
-#define CONFIG_SYS_FSL_SEC_BE
#define CONFIG_SYS_FSL_SFP_BE
#define CONFIG_SYS_FSL_SRK_LE
#define CONFIG_KEY_REVOCATION
@@ -205,32 +205,40 @@
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
#elif defined(CONFIG_LS1012A)
#define CONFIG_MAX_CPUS 1
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0x01000000
-#define CONFIG_SYS_FSL_SEC_COMPAT 5
#undef CONFIG_SYS_FSL_DDRC_ARM_GEN3
-#define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */
-#define CONFIG_SYS_FSL_OCRAM_SIZE 0x200000 /* 2 MiB */
-
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
+#elif defined(CONFIG_LS1046A)
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_NUM_FMAN 1
+#define CONFIG_SYS_NUM_FM1_DTSEC 8
+#define CONFIG_SYS_NUM_FM1_10GEC 2
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
+#define CONFIG_SYS_FSL_DDR_BE
+#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
-#define CONFIG_SYS_FSL_CCSR_GUR_BE
-#define CONFIG_SYS_FSL_CCSR_SCFG_BE
-#define CONFIG_SYS_FSL_ESDHC_BE
-#define CONFIG_SYS_FSL_WDOG_BE
-#define CONFIG_SYS_FSL_DSPI_BE
-#define CONFIG_SYS_FSL_QSPI_BE
-#define CONFIG_SYS_FSL_PEX_LUT_BE
+#define CONFIG_SYS_FSL_SRDS_2
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_SFP_VER_3_2
+#define CONFIG_SYS_FSL_SNVS_LE
+#define CONFIG_SYS_FSL_SFP_BE
+#define CONFIG_SYS_FSL_SRK_LE
+#define CONFIG_KEY_REVOCATION
-#define SRDS_MAX_LANES 4
-#define CONFIG_SYS_FSL_SRDS_1
-#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
-#define CONFIG_SYS_FSL_SEC_BE
+/* SMMU Defintions */
+#define SMMU_BASE 0x09000000
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0x01410000
+#define GICC_BASE 0x01420000
+
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
#else
#error SoC not defined
#endif
+#endif
#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 5fd5e87..e2d96a1 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -13,6 +13,8 @@
CPU_TYPE_ENTRY(LS2045A, LS2045A, 4),
CPU_TYPE_ENTRY(LS1043A, LS1043A, 4),
CPU_TYPE_ENTRY(LS1023A, LS1023A, 2),
+ CPU_TYPE_ENTRY(LS1046A, LS1046A, 4),
+ CPU_TYPE_ENTRY(LS1026A, LS1026A, 2),
CPU_TYPE_ENTRY(LS2040A, LS2040A, 4),
CPU_TYPE_ENTRY(LS1012A, LS1012A, 1),
};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index 487cba8..e1b3f44 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -140,6 +140,7 @@
enum srds {
FSL_SRDS_1 = 0,
+ FSL_SRDS_2 = 1,
};
#endif
@@ -150,7 +151,7 @@
enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
int is_serdes_prtcl_valid(int serdes, u32 prtcl);
-#ifdef CONFIG_LS1043A
+#ifdef CONFIG_FSL_LSCH2
const char *serdes_clock_to_string(u32 clock);
int get_serdes_protocol(void);
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 8b8a7c1..95a4293 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -31,9 +31,9 @@
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011c0600)
#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_IMMR + 0x011d0500)
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_IMMR + 0x011d0600)
-#define CONFIG_SYS_LS1043A_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x01f00000)
-#define CONFIG_SYS_LS1043A_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02000000)
-#define CONFIG_SYS_LS1043A_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x01f00000)
+#define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02000000)
+#define CONFIG_SYS_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + 0x02100000)
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000)
@@ -94,6 +94,7 @@
#define TY_ITYP_VER_A7 0x1
#define TY_ITYP_VER_A53 0x2
#define TY_ITYP_VER_A57 0x3
+#define TY_ITYP_VER_A72 0x4
#define TP_CLUSTER_EOC 0xc0000000 /* end of clusters */
#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
@@ -227,6 +228,8 @@
#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK 0x3f
#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK 0xffff0000
#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT 16
+#define FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK 0x0000ffff
+#define FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT 0
#define RCW_SB_EN_REG_INDEX 7
#define RCW_SB_EN_MASK 0x00200000
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 3ad46eb..93e26c1 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -52,8 +52,8 @@
#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x01020000)
#define I2C4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01030000)
-#define CONFIG_SYS_LS2080A_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000)
-#define CONFIG_SYS_LS2080A_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02110000)
+#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02110000)
/* TZ Address Space Controller Definitions */
#define TZASC1_BASE 0x01100000 /* as per CCSR map. */
@@ -156,6 +156,7 @@
#define TY_ITYP_VER_A7 0x1
#define TY_ITYP_VER_A53 0x2
#define TY_ITYP_VER_A57 0x3
+#define TY_ITYP_VER_A72 0x4
#define TP_CLUSTER_EOC 0x80000000 /* end of clusters */
#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 39e8c7a..8d4a7ad 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -44,6 +44,8 @@
#define SVR_LS1012A 0x870400
#define SVR_LS1043A 0x879200
#define SVR_LS1023A 0x879208
+#define SVR_LS1046A 0x870700
+#define SVR_LS1026A 0x870708
#define SVR_LS2045A 0x870120
#define SVR_LS2080A 0x870110
#define SVR_LS2085A 0x870100
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 04abec4..d408fe4 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -10,7 +10,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
#define OCRAM_BASE_ADDR 0x10000000
-#define OCRAM_SIZE 0x00020000
+#define OCRAM_SIZE 0x00010000
#define OCRAM_BASE_S_ADDR 0x10010000
#define OCRAM_S_SIZE 0x00010000
@@ -32,16 +32,15 @@
#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000)
#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
#define CONFIG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000)
+#define CONFIG_SYS_FSL_RCPM_ADDR (CONFIG_SYS_IMMR + 0x00ee2000)
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500)
#define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000)
-#define CONFIG_SYS_LS102XA_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000)
-#define CONFIG_SYS_LS102XA_USB1_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET)
+#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_EHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x07600000)
#define CONFIG_SYS_FSL_SEC_OFFSET 0x00700000
#define CONFIG_SYS_FSL_JR0_OFFSET 0x00710000
-#define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000
#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000
#define CONFIG_SYS_TSEC3_OFFSET 0x01d90000
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index 53cd755..b35c271 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -17,8 +17,6 @@
#ifdef CONFIG_CHAIN_OF_TRUST
#define CONFIG_CMD_ESBC_VALIDATE
-#define CONFIG_CMD_BLOB
-#define CONFIG_CMD_HASH
#define CONFIG_FSL_SEC_MON
#define CONFIG_SHA_HW_ACCEL
#define CONFIG_SHA_PROG_HW_ACCEL
@@ -28,6 +26,28 @@
#define CONFIG_FSL_CAAM
#endif
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_DM 1
+#define CONFIG_SPL_CRYPTO_SUPPORT
+#define CONFIG_SPL_HASH_SUPPORT
+#define CONFIG_SPL_RSA
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+/*
+ * Define the key hash for U-Boot here if public/private key pair used to
+ * sign U-boot are different from the SRK hash put in the fuse
+ * Example of defining KEY_HASH is
+ * #define CONFIG_SPL_UBOOT_KEY_HASH \
+ * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
+ * else leave it defined as NULL
+ */
+
+#define CONFIG_SPL_UBOOT_KEY_HASH NULL
+#endif /* ifdef CONFIG_SPL_BUILD */
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_CMD_BLOB
+#define CONFIG_CMD_HASH
#define CONFIG_KEY_REVOCATION
#ifndef CONFIG_SYS_RAMBOOT
/* The key used for verification of next level images
@@ -58,39 +78,55 @@
"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
#else
#define CONFIG_EXTRA_ENV \
- "setenv fdt_high 0xcfffffff;" \
- "setenv initrd_high 0xcfffffff;" \
+ "setenv fdt_high 0xffffffff;" \
+ "setenv initrd_high 0xffffffff;" \
"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
#endif
/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
* Non-XIP Memory (Nand/SD)*/
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) || \
+ defined(CONFIG_SD_BOOT)
#define CONFIG_BOOTSCRIPT_COPY_RAM
#endif
-/* The address needs to be modified according to NOR and DDR memory map */
+/* The address needs to be modified according to NOR, NAND, SD and
+ * DDR memory map
+ */
#ifdef CONFIG_LS2080A
-#define CONFIG_BS_HDR_ADDR_FLASH 0x583920000
-#define CONFIG_BS_ADDR_FLASH 0x583900000
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x583920000
+#define CONFIG_BS_ADDR_DEVICE 0x583900000
#define CONFIG_BS_HDR_ADDR_RAM 0xa3920000
#define CONFIG_BS_ADDR_RAM 0xa3900000
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#define CONFIG_BS_SIZE 0x00001000
#else
-#define CONFIG_BS_HDR_ADDR_FLASH 0x600a0000
-#define CONFIG_BS_ADDR_FLASH 0x60060000
-#define CONFIG_BS_HDR_ADDR_RAM 0xa0060000
-#define CONFIG_BS_ADDR_RAM 0xa0060000
+#ifdef CONFIG_SD_BOOT
+/* For SD boot address and size are assigned in terms of sector
+ * offset and no. of sectors respectively.
+ */
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000800
+#define CONFIG_BS_ADDR_DEVICE 0x00000840
+#define CONFIG_BS_HDR_SIZE 0x00000010
+#define CONFIG_BS_SIZE 0x00000008
+#else
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000
+#define CONFIG_BS_ADDR_DEVICE 0x60060000
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#define CONFIG_BS_SIZE 0x00001000
+#endif /* #ifdef CONFIG_SD_BOOT */
+#define CONFIG_BS_HDR_ADDR_RAM 0x81000000
+#define CONFIG_BS_ADDR_RAM 0x81020000
#endif
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
-#define CONFIG_BS_HDR_SIZE 0x00002000
#define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM
-#define CONFIG_BS_SIZE 0x00001000
#else
-#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_FLASH
-/* BS_HDR_SIZE, BOOTSCRIPT_ADDR and BS_SIZE are not required */
+#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_DEVICE
+/* BOOTSCRIPT_ADDR is not required */
#endif
#include <config_fsl_chain_trust.h>
+#endif /* #ifndef CONFIG_SPL_BUILD */
#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
#endif
diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
index e76ecb2..8aefaa7 100644
--- a/arch/arm/include/asm/psci.h
+++ b/arch/arm/include/asm/psci.h
@@ -31,6 +31,12 @@
#define ARM_PSCI_RET_NI (-1)
#define ARM_PSCI_RET_INVAL (-2)
#define ARM_PSCI_RET_DENIED (-3)
+#define ARM_PSCI_RET_ALREADY_ON (-4)
+#define ARM_PSCI_RET_ON_PENDING (-5)
+#define ARM_PSCI_RET_INTERNAL_FAILURE (-6)
+#define ARM_PSCI_RET_NOT_PRESENT (-7)
+#define ARM_PSCI_RET_DISABLED (-8)
+#define ARM_PSCI_RET_INVALID_ADDRESS (-9)
/* PSCI 0.2 interface */
#define ARM_PSCI_0_2_FN_BASE 0x84000000
@@ -47,10 +53,25 @@
#define ARM_PSCI_0_2_FN_SYSTEM_OFF ARM_PSCI_0_2_FN(8)
#define ARM_PSCI_0_2_FN_SYSTEM_RESET ARM_PSCI_0_2_FN(9)
+/* PSCI 1.0 interface */
+#define ARM_PSCI_1_0_FN_PSCI_FEATURES ARM_PSCI_0_2_FN(10)
+#define ARM_PSCI_1_0_FN_CPU_FREEZE ARM_PSCI_0_2_FN(11)
+#define ARM_PSCI_1_0_FN_CPU_DEFAULT_SUSPEND ARM_PSCI_0_2_FN(12)
+#define ARM_PSCI_1_0_FN_NODE_HW_STATE ARM_PSCI_0_2_FN(13)
+#define ARM_PSCI_1_0_FN_SYSTEM_SUSPEND ARM_PSCI_0_2_FN(14)
+#define ARM_PSCI_1_0_FN_SET_SUSPEND_MODE ARM_PSCI_0_2_FN(15)
+#define ARM_PSCI_1_0_FN_STAT_RESIDENCY ARM_PSCI_0_2_FN(16)
+#define ARM_PSCI_1_0_FN_STAT_COUNT ARM_PSCI_0_2_FN(17)
+
/* 1KB stack per core */
#define ARM_PSCI_STACK_SHIFT 10
#define ARM_PSCI_STACK_SIZE (1 << ARM_PSCI_STACK_SHIFT)
+/* PSCI affinity level state returned by AFFINITY_INFO */
+#define PSCI_AFFINITY_LEVEL_ON 0
+#define PSCI_AFFINITY_LEVEL_OFF 1
+#define PSCI_AFFINITY_LEVEL_ON_PENDING 2
+
#ifndef __ASSEMBLY__
#include <asm/types.h>
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 2e2d565..2e937f0 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -128,10 +128,10 @@
/* If Boot Script is not on NOR and is required to be copied on RAM */
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
#define CONFIG_BS_HDR_ADDR_RAM 0x00010000
-#define CONFIG_BS_HDR_ADDR_FLASH 0x00800000
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x00800000
#define CONFIG_BS_HDR_SIZE 0x00002000
#define CONFIG_BS_ADDR_RAM 0x00012000
-#define CONFIG_BS_ADDR_FLASH 0x00802000
+#define CONFIG_BS_ADDR_DEVICE 0x00802000
#define CONFIG_BS_SIZE 0x00001000
#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c
index 290536d..dea231b 100644
--- a/board/freescale/common/fsl_chain_of_trust.c
+++ b/board/freescale/common/fsl_chain_of_trust.c
@@ -10,6 +10,10 @@
#include <fsl_sfp.h>
#include <dm/root.h>
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_FRAMEWORK)
+#include <spl.h>
+#endif
+
#ifdef CONFIG_ADDR_MAP
#include <asm/mmu.h>
#endif
@@ -115,7 +119,7 @@
* do not use common SPL framework, so need to call this function here.
*/
#if defined(CONFIG_SPL_DM) && (!defined(CONFIG_SPL_FRAMEWORK))
- dm_init_and_scan(false);
+ dm_init_and_scan(true);
#endif
res = fsl_secboot_validate(hdr_addr, CONFIG_SPL_UBOOT_KEY_HASH,
&img_addr);
@@ -123,4 +127,32 @@
if (res == 0)
printf("SPL: Validation of U-boot successful\n");
}
+
+#ifdef CONFIG_SPL_FRAMEWORK
+/* Override weak funtion defined in SPL framework to enable validation
+ * of main u-boot image before jumping to u-boot image.
+ */
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+ typedef void __noreturn (*image_entry_noargs_t)(void);
+ uint32_t hdr_addr;
+
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t)(unsigned long)spl_image->entry_point;
+
+ hdr_addr = (spl_image->entry_point + spl_image->size -
+ CONFIG_U_BOOT_HDR_SIZE);
+ spl_validate_uboot(hdr_addr, (uintptr_t)spl_image->entry_point);
+ /*
+ * In case of failure in validation, spl_validate_uboot would
+ * not return back in case of Production environment with ITS=1.
+ * Thus U-Boot will not start.
+ * In Development environment (ITS=0 and SB_EN=1), the function
+ * may return back in case of non-fatal failures.
+ */
+
+ debug("image entry point: 0x%X\n", spl_image->entry_point);
+ image_entry();
+}
+#endif /* ifdef CONFIG_SPL_FRAMEWORK */
#endif /* ifdef CONFIG_SPL_BUILD */
diff --git a/board/freescale/ls1021aqds/Makefile b/board/freescale/ls1021aqds/Makefile
index ab02344..f0390c1 100644
--- a/board/freescale/ls1021aqds/Makefile
+++ b/board/freescale/ls1021aqds/Makefile
@@ -8,3 +8,4 @@
obj-y += ddr.o
obj-y += eth.o
obj-$(CONFIG_FSL_DCU_FB) += dcu.o
+obj-$(CONFIG_ARMV7_PSCI) += psci.o
diff --git a/board/freescale/ls1021aqds/psci.S b/board/freescale/ls1021aqds/psci.S
new file mode 100644
index 0000000..598168c
--- /dev/null
+++ b/board/freescale/ls1021aqds/psci.S
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2016 NXP Semiconductor.
+ * Author: Wang Dongsheng <dongsheng.wang@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+#include <asm/armv7.h>
+#include <asm/psci.h>
+
+ .pushsection ._secure.text, "ax"
+
+ .arch_extension sec
+
+ .align 5
+
+.globl psci_system_off
+psci_system_off:
+ @ Get QIXIS base address
+ movw r1, #(QIXIS_BASE & 0xffff)
+ movt r1, #(QIXIS_BASE >> 16)
+
+ ldrb r2, [r1, #QIXIS_PWR_CTL]
+ orr r2, r2, #QIXIS_PWR_CTL_POWEROFF
+ strb r2, [r1, #QIXIS_PWR_CTL]
+
+1: wfi
+ b 1b
+
+ .popsection
diff --git a/board/freescale/ls1021atwr/Makefile b/board/freescale/ls1021atwr/Makefile
index 01296c0..5238b15 100644
--- a/board/freescale/ls1021atwr/Makefile
+++ b/board/freescale/ls1021atwr/Makefile
@@ -6,3 +6,4 @@
obj-y += ls1021atwr.o
obj-$(CONFIG_FSL_DCU_FB) += dcu.o
+obj-$(CONFIG_ARMV7_PSCI) += psci.o
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index c69c9cb..77482a9 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -503,6 +503,13 @@
return 0;
}
+#if defined(CONFIG_SPL_BUILD)
+void spl_board_init(void)
+{
+ ls102xa_smmu_stream_id_init();
+}
+#endif
+
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
diff --git a/board/freescale/ls1021atwr/psci.S b/board/freescale/ls1021atwr/psci.S
new file mode 100644
index 0000000..bec7356
--- /dev/null
+++ b/board/freescale/ls1021atwr/psci.S
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2016 NXP Semiconductor.
+ * Author: Wang Dongsheng <dongsheng.wang@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+#include <asm/armv7.h>
+#include <asm/psci.h>
+
+ .pushsection ._secure.text, "ax"
+
+ .arch_extension sec
+
+ .align 5
+
+.globl psci_system_off
+psci_system_off:
+1: wfi
+ b 1b
+
+ .popsection
diff --git a/board/freescale/ls1043aqds/MAINTAINERS b/board/freescale/ls1043aqds/MAINTAINERS
index 65a0af1..992c54c 100644
--- a/board/freescale/ls1043aqds/MAINTAINERS
+++ b/board/freescale/ls1043aqds/MAINTAINERS
@@ -9,3 +9,4 @@
F: configs/ls1043aqds_sdcard_ifc_defconfig
F: configs/ls1043aqds_sdcard_qspi_defconfig
F: configs/ls1043aqds_qspi_defconfig
+F: configs/ls1043aqds_lpuart_defconfig
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index b7e9c21..941dfbc 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -327,6 +327,7 @@
{
u64 base[CONFIG_NR_DRAM_BANKS];
u64 size[CONFIG_NR_DRAM_BANKS];
+ u8 reg;
/* fixup DT for the two DDR banks */
base[0] = gd->bd->bi_dram[0].start;
@@ -341,6 +342,15 @@
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
+
+ reg = QIXIS_READ(brdcfg[0]);
+ reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ /* Disable IFC if QSPI is enabled */
+ if (reg == 0xF)
+ do_fixup_by_compat(blob, "fsl,ifc",
+ "status", "disabled", 8 + 1, 1);
+
return 0;
}
#endif
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 0765326..8f78b67 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -6,6 +6,7 @@
F: include/configs/ls2080aqds.h
F: configs/ls2080aqds_defconfig
F: configs/ls2080aqds_nand_defconfig
+F: configs/ls2080aqds_qspi_defconfig
LS2080A_SECURE_BOOT BOARD
M: Saksham Jain <saksham.jain@nxp.freescale.com>
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..c735d6d
--- /dev/null
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -0,0 +1,31 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1021ATWR=y
+CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SECURE_BOOT"
+CONFIG_BOOTDELAY=0
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_RSA=y
+CONFIG_DM=y
diff --git a/drivers/crypto/fsl/fsl_rsa.c b/drivers/crypto/fsl/fsl_rsa.c
index cf1c4c1..5471504 100644
--- a/drivers/crypto/fsl/fsl_rsa.c
+++ b/drivers/crypto/fsl/fsl_rsa.c
@@ -53,6 +53,7 @@
.name = "fsl_rsa_mod_exp",
.id = UCLASS_MOD_EXP,
.ops = &fsl_mod_exp_ops,
+ .flags = DM_FLAG_PRE_RELOC,
};
U_BOOT_DEVICE(fsl_rsa) = {
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index b8cc647..407c4a7 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -583,12 +583,11 @@
static int fsl_i2c_ofdata_to_platdata(struct udevice *bus)
{
struct fsl_i2c_dev *dev = dev_get_priv(bus);
- u64 reg;
- u32 addr, size;
+ fdt_addr_t addr;
+ fdt_size_t size;
- reg = fdtdec_get_addr(gd->fdt_blob, bus->of_offset, "reg");
- addr = reg >> 32;
- size = reg & 0xFFFFFFFF;
+ addr = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, bus->of_offset,
+ "reg", 0, &size);
dev->base = map_sysmem(CONFIG_SYS_IMMR + addr, size);
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 493cdc6..344fbe2 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -39,3 +39,4 @@
obj-$(CONFIG_PPC_B4420) += b4860.o
obj-$(CONFIG_PPC_B4860) += b4860.o
obj-$(CONFIG_LS1043A) += ls1043.o
+obj-$(CONFIG_LS1046A) += ls1046.o
diff --git a/drivers/net/fm/ls1046.c b/drivers/net/fm/ls1046.c
new file mode 100644
index 0000000..bf55554
--- /dev/null
+++ b/drivers/net/fm/ls1046.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+
+#define FSL_CHASSIS2_RCWSR13_EC1 0xe0000000 /* bits 416..418 */
+#define FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII 0x00000000
+#define FSL_CHASSIS2_RCWSR13_EC1_GPIO 0x20000000
+#define FSL_CHASSIS2_RCWSR13_EC1_FTM 0xa0000000
+#define FSL_CHASSIS2_RCWSR13_EC2 0x1c000000 /* bits 419..421 */
+#define FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII 0x00000000
+#define FSL_CHASSIS2_RCWSR13_EC2_GPIO 0x04000000
+#define FSL_CHASSIS2_RCWSR13_EC2_1588 0x08000000
+#define FSL_CHASSIS2_RCWSR13_EC2_FTM 0x14000000
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CHASSIS2_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CHASSIS2_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CHASSIS2_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CHASSIS2_DEVDISR2_DTSEC1_4,
+ [FM1_DTSEC5] = FSL_CHASSIS2_DEVDISR2_DTSEC1_5,
+ [FM1_DTSEC6] = FSL_CHASSIS2_DEVDISR2_DTSEC1_6,
+ [FM1_DTSEC9] = FSL_CHASSIS2_DEVDISR2_DTSEC1_9,
+ [FM1_DTSEC10] = FSL_CHASSIS2_DEVDISR2_DTSEC1_10,
+ [FM1_10GEC1] = FSL_CHASSIS2_DEVDISR2_10GEC1_1,
+ [FM1_10GEC2] = FSL_CHASSIS2_DEVDISR2_10GEC1_2,
+ [FM1_10GEC3] = FSL_CHASSIS2_DEVDISR2_10GEC1_3,
+ [FM1_10GEC4] = FSL_CHASSIS2_DEVDISR2_10GEC1_4,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1) && (is_serdes_configured(XFI_FM1_MAC9)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM1_DTSEC9) && (is_serdes_configured(XFI_FM1_MAC9)))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC2) && (is_serdes_configured(XFI_FM1_MAC10)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM1_DTSEC10) && (is_serdes_configured(XFI_FM1_MAC10)))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if (port == FM1_DTSEC3)
+ if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
+ FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII)
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if (port == FM1_DTSEC4)
+ if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
+ FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII)
+ return PHY_INTERFACE_MODE_RGMII;
+
+ /* handle SGMII, only MAC 2/5/6/9/10 available */
+ switch (port) {
+ case FM1_DTSEC2:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ case FM1_DTSEC9:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(SGMII_FM1_DTSEC2 + port - FM1_DTSEC2))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ break;
+ }
+
+ /* handle 2.5G SGMII, only MAC 5/9/10 available */
+ switch (port) {
+ case FM1_DTSEC5:
+ case FM1_DTSEC9:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(SGMII_2500_FM1_DTSEC5 +
+ port - FM1_DTSEC5))
+ return PHY_INTERFACE_MODE_SGMII_2500;
+ break;
+ default:
+ break;
+ }
+
+ /* handle QSGMII, only MAC 1/5/6/10 available */
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(QSGMII_FM1_A))
+ return PHY_INTERFACE_MODE_QSGMII;
+ break;
+ default:
+ break;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/include/config_fsl_chain_trust.h b/include/config_fsl_chain_trust.h
index 566fd80..eb45e98 100644
--- a/include/config_fsl_chain_trust.h
+++ b/include/config_fsl_chain_trust.h
@@ -74,23 +74,27 @@
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
#define CONFIG_BS_COPY_ENV \
"setenv bs_hdr_ram " __stringify(CONFIG_BS_HDR_ADDR_RAM)";" \
- "setenv bs_hdr_flash " __stringify(CONFIG_BS_HDR_ADDR_FLASH)";" \
+ "setenv bs_hdr_device " __stringify(CONFIG_BS_HDR_ADDR_DEVICE)";" \
"setenv bs_hdr_size " __stringify(CONFIG_BS_HDR_SIZE)";" \
"setenv bs_ram " __stringify(CONFIG_BS_ADDR_RAM)";" \
- "setenv bs_flash " __stringify(CONFIG_BS_ADDR_FLASH)";" \
+ "setenv bs_device " __stringify(CONFIG_BS_ADDR_DEVICE)";" \
"setenv bs_size " __stringify(CONFIG_BS_SIZE)";"
/* For secure boot flow, default environment used will be used */
#if defined(CONFIG_SYS_RAMBOOT)
#if defined(CONFIG_RAMBOOT_NAND)
#define CONFIG_BS_COPY_CMD \
- "nand read $bs_hdr_ram $bs_hdr_flash $bs_hdr_size ;" \
- "nand read $bs_ram $bs_flash $bs_size ;"
+ "nand read $bs_hdr_ram $bs_hdr_device $bs_hdr_size ;" \
+ "nand read $bs_ram $bs_device $bs_size ;"
#endif /* CONFIG_RAMBOOT_NAND */
-#else
+#elif defined(CONFIG_SD_BOOT)
#define CONFIG_BS_COPY_CMD \
- "cp.b $bs_hdr_flash $bs_hdr_ram $bs_hdr_size ;" \
- "cp.b $bs_flash $bs_ram $bs_size ;"
+ "mmc read $bs_hdr_ram $bs_hdr_device $bs_hdr_size ;" \
+ "mmc read $bs_ram $bs_device $bs_size ;"
+#else /* CONFIG_SD_BOOT */
+#define CONFIG_BS_COPY_CMD \
+ "cp.b $bs_hdr_device $bs_hdr_ram $bs_hdr_size ;" \
+ "cp.b $bs_device $bs_ram $bs_size ;"
#endif
#endif /* CONFIG_BOOTSCRIPT_COPY_RAM */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index eb444eb..47180f9 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -10,8 +10,11 @@
#define CONFIG_LS102XA
#define CONFIG_ARMV7_PSCI
+#define CONFIG_ARMV7_PSCI_1_0
#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS
+#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
+
#define CONFIG_SYS_FSL_CLK
#define CONFIG_DISPLAY_CPUINFO
@@ -280,6 +283,8 @@
#define QIXIS_LBMAP_SHIFT 0
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_PWR_CTL 0x21
+#define QIXIS_PWR_CTL_POWEROFF 0x80
#define QIXIS_RST_CTL_RESET 0x44
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 616aebb..2f19950 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -10,8 +10,11 @@
#define CONFIG_LS102XA
#define CONFIG_ARMV7_PSCI
+#define CONFIG_ARMV7_PSCI_1_0
#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS
+#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
+
#define CONFIG_SYS_FSL_CLK
#define CONFIG_DISPLAY_CPUINFO
@@ -124,7 +127,18 @@
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image.
+ */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (0x400 + \
+ (CONFIG_U_BOOT_HDR_SIZE / 512)
+#else
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
+#endif /* ifdef CONFIG_SECURE_BOOT */
#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
@@ -137,7 +151,18 @@
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+
+#ifdef CONFIG_U_BOOT_HDR_SIZE
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image. Here u-boot max. size is 512K. So if binary
+ * size increases then increase this size in case of secure boot as
+ * it uses raw u-boot image instead of fit image.
+ */
+#define CONFIG_SYS_MONITOR_LEN (0x80000 + CONFIG_U_BOOT_HDR_SIZE)
+#else
#define CONFIG_SYS_MONITOR_LEN 0x80000
+#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
#endif
#ifdef CONFIG_QSPI_BOOT
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index b0d4a8d..0ad5261 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -241,22 +241,37 @@
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \
+ "5m(kernel),1m(dtb),9m(file_system)"
+#else
+#define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
+ "1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
+ "1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
+ "1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
+ "1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
+ "40m(nor_bank4_fit);7e800000.flash:" \
+ "1m(nand_uboot),1m(nand_uboot_env)," \
+ "20m(nand_fit);spi0.0:1m(uboot)," \
+ "5m(kernel),1m(dtb),9m(file_system)"
+#endif
+
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0x61100000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "console=ttyAMA0,38400n8\0"
+ "console=ttyS0,115200\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
- "earlycon=uart8250,mmio,0x21c0500"
+ "earlycon=uart8250,mmio,0x21c0500 " \
+ MTDPARTS_DEFAULT
+
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
"e0000 f00000 && bootm $kernel_load"
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index 253eddf..199f366 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -51,22 +51,18 @@
struct dwc3 *dwc3_reg;
};
-#if defined(CONFIG_LS102XA)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR
+#if defined(CONFIG_LS102XA) || defined(CONFIG_LS1012A)
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
#elif defined(CONFIG_LS2080A)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR
-#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR
-#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR
-#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR
-#elif defined(CONFIG_LS1012A)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR
-#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
-#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
+#elif defined(CONFIG_LS1043A)
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_XHCI_USB3_ADDR
#endif
#define FSL_USB_XHCI_ADDR {CONFIG_SYS_FSL_XHCI_USB1_ADDR, \
diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h
index 586d32a..882aed4 100644
--- a/include/usb/ehci-ci.h
+++ b/include/usb/ehci-ci.h
@@ -160,7 +160,7 @@
#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR
#define CONFIG_SYS_FSL_USB2_ADDR 0
#elif defined(CONFIG_LS102XA)
-#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_LS102XA_USB1_ADDR
+#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_EHCI_USB1_ADDR
#define CONFIG_SYS_FSL_USB2_ADDR 0
#endif