i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value
Many boards/controllers/drivers don't support an I2C slave interface,
however CONFIG_SYS_I2C_SLAVE is used in common code so provide a
default
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index e598bf1..f749087 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -401,10 +401,6 @@
#define CONFIG_SYS_I2C_SPEED 50000
#endif
-#ifndef CONFIG_SYS_I2C_SLAVE
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-#endif
-
void eeprom_init (void)
{
#if defined(CONFIG_SPI)
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
index 35cf8f1..2b954b4 100644
--- a/cpu/mpc8260/i2c.c
+++ b/cpu/mpc8260/i2c.c
@@ -58,9 +58,6 @@
#define CONFIG_SYS_I2C_SPEED 50000
#endif
-#ifndef CONFIG_SYS_I2C_SLAVE
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-#endif
/*-----------------------------------------------------------------------
*/
diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c
index 57861b3..75bd70d 100644
--- a/cpu/ppc4xx/40x_spd_sdram.c
+++ b/cpu/ppc4xx/40x_spd_sdram.c
@@ -56,10 +56,6 @@
#define CONFIG_SYS_I2C_SPEED 50000
#endif
-#ifndef CONFIG_SYS_I2C_SLAVE
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-#endif
-
#define ONE_BILLION 1000000000
#define SDRAM0_CFG_DCE 0x80000000
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 153391e..f26fcda 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -66,10 +66,6 @@
#define CONFIG_SYS_I2C_SPEED 50000
#endif
-#ifndef CONFIG_SYS_I2C_SLAVE
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-#endif
-
#define ONE_BILLION 1000000000
/*
diff --git a/include/i2c.h b/include/i2c.h
index f8a59a6..668e754 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -78,16 +78,22 @@
#endif
#ifdef CONFIG_8xx
-/* Set default values for the I2C bus speed and slave address on 8xx. In the
+/* Set default value for the I2C bus speed on 8xx. In the
* future, we'll define these in all 8xx board config files.
*/
#ifndef CONFIG_SYS_I2C_SPEED
#define CONFIG_SYS_I2C_SPEED 50000
#endif
-
-#ifndef CONFIG_SYS_I2C_SLAVE
-#define CONFIG_SYS_I2C_SLAVE 0xFE
#endif
+
+/*
+ * Many boards/controllers/drivers don't support an I2C slave interface so
+ * provide a default slave address for them for use in common code. A real
+ * value for CONFIG_SYS_I2C_SLAVE should be defined for any board which does
+ * support a slave interface.
+ */
+#ifndef CONFIG_SYS_I2C_SLAVE
+#define CONFIG_SYS_I2C_SLAVE 0xfe
#endif
/*