drivers: usb: host: Add BRCM xHCI driver
Base driver for Broadcom xHCI controllers
Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0987ff2..94ac969 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -88,6 +88,14 @@
depends on !SPL_NO_USB
help
Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
+
+config USB_XHCI_BRCM
+ bool "Broadcom USB3 Host XHCI controller"
+ depends on DM_USB
+ help
+ USB controller based on the Broadcom USB3 IP Core.
+ Supports USB2/3 functionality.
+
endif # USB_XHCI_HCD
config USB_EHCI_HCD
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 7feeff6..b62f346 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -44,6 +44,7 @@
obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
# xhci
+obj-$(CONFIG_USB_XHCI_BRCM) += xhci-brcm.o
obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o
obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
diff --git a/drivers/usb/host/xhci-brcm.c b/drivers/usb/host/xhci-brcm.c
new file mode 100644
index 0000000..ee65f51
--- /dev/null
+++ b/drivers/usb/host/xhci-brcm.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Broadcom.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <usb/xhci.h>
+
+#define DRD2U3H_XHC_REGS_AXIWRA 0xC08
+#define DRD2U3H_XHC_REGS_AXIRDA 0xC0C
+
+#define USBAXI_CACHE 0xF
+#define USBAXI_PROT 0x8
+#define USBAXI_SA_MASK 0x1FF
+#define USBAXI_UA_MASK (0x1FF << 16)
+#define USBAXI_SA_VAL ((USBAXI_CACHE << 4) | USBAXI_PROT)
+#define USBAXI_UA_VAL (USBAXI_SA_VAL << 16)
+#define USBAXI_SA_UA_MASK (USBAXI_UA_MASK | USBAXI_SA_MASK)
+#define USBAXI_SA_UA_VAL (USBAXI_UA_VAL | USBAXI_SA_VAL)
+
+struct brcm_xhci_platdata {
+ unsigned int arcache;
+ unsigned int awcache;
+ void __iomem *hc_base;
+};
+
+static int xhci_brcm_probe(struct udevice *dev)
+{
+ struct brcm_xhci_platdata *plat = dev_get_platdata(dev);
+ struct xhci_hcor *hcor;
+ struct xhci_hccr *hcd;
+ int len, ret = 0;
+
+ if (!plat) {
+ dev_err(dev, "Can't get xHCI Plat data\n");
+ return -ENOMEM;
+ }
+
+ hcd = dev_read_addr_ptr(dev);
+ if (!hcd) {
+ dev_err(dev, "Can't get the xHCI register base address\n");
+ return -ENXIO;
+ }
+
+ plat->hc_base = hcd;
+ len = HC_LENGTH(xhci_readl(&hcd->cr_capbase));
+ hcor = (struct xhci_hcor *)(plat->hc_base + len);
+
+ /* Save the default values of AXI read and write attributes */
+ plat->awcache = readl(plat->hc_base + DRD2U3H_XHC_REGS_AXIWRA);
+ plat->arcache = readl(plat->hc_base + DRD2U3H_XHC_REGS_AXIRDA);
+
+ /* Enable AXI write attributes */
+ clrsetbits_le32(plat->hc_base + DRD2U3H_XHC_REGS_AXIWRA,
+ USBAXI_SA_UA_MASK, USBAXI_SA_UA_VAL);
+
+ /* Enable AXI read attributes */
+ clrsetbits_le32(plat->hc_base + DRD2U3H_XHC_REGS_AXIRDA,
+ USBAXI_SA_UA_MASK, USBAXI_SA_UA_VAL);
+
+ ret = xhci_register(dev, hcd, hcor);
+ if (ret)
+ dev_err(dev, "Failed to register xHCI\n");
+
+ return ret;
+}
+
+static int xhci_brcm_deregister(struct udevice *dev)
+{
+ struct brcm_xhci_platdata *plat = dev_get_platdata(dev);
+
+ /* Restore the default values for AXI read and write attributes */
+ writel(plat->awcache, plat->hc_base + DRD2U3H_XHC_REGS_AXIWRA);
+ writel(plat->arcache, plat->hc_base + DRD2U3H_XHC_REGS_AXIRDA);
+
+ return xhci_deregister(dev);
+}
+
+static const struct udevice_id xhci_brcm_ids[] = {
+ { .compatible = "brcm,generic-xhci" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_xhci) = {
+ .name = "xhci_brcm",
+ .id = UCLASS_USB,
+ .probe = xhci_brcm_probe,
+ .remove = xhci_brcm_deregister,
+ .ops = &xhci_usb_ops,
+ .of_match = xhci_brcm_ids,
+ .platdata_auto_alloc_size = sizeof(struct brcm_xhci_platdata),
+ .priv_auto_alloc_size = sizeof(struct xhci_ctrl),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};