ARM: at91: Add sam9x60 soc
Add new Microchip sam9x60 SoC based on an ARM926.
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[tudor.ambarus@microchip.com: fix SFR definition]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
diff --git a/arch/arm/mach-at91/arm926ejs/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile
index 6b0b289..8de6a2f 100644
--- a/arch/arm/mach-at91/arm926ejs/Makefile
+++ b/arch/arm/mach-at91/arm926ejs/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o
obj-$(CONFIG_AT91SAM9N12) += at91sam9n12_devices.o
obj-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o
+obj-$(CONFIG_SAM9X60) += sam9x60_devices.o
obj-$(CONFIG_AT91_EFLASH) += eflash.o
obj-$(CONFIG_AT91_LED) += led.o
obj-y += clock.o
diff --git a/arch/arm/mach-at91/arm926ejs/sam9x60_devices.c b/arch/arm/mach-at91/arm926ejs/sam9x60_devices.c
new file mode 100644
index 0000000..d463bbc
--- /dev/null
+++ b/arch/arm/mach-at91/arm926ejs/sam9x60_devices.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+unsigned int get_chip_id(void)
+{
+ /* The 0x40 is the offset of cidr in DBGU */
+ return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK;
+}
+
+unsigned int get_extension_chip_id(void)
+{
+ /* The 0x44 is the offset of exid in DBGU */
+ return readl(ATMEL_BASE_DBGU + 0x44);
+}
+
+unsigned int has_emac1(void)
+{
+ return cpu_is_sam9x60();
+}
+
+unsigned int has_emac0(void)
+{
+ return cpu_is_sam9x60();
+}
+
+unsigned int has_lcdc(void)
+{
+ return cpu_is_sam9x60();
+}
+
+char *get_cpu_name(void)
+{
+ unsigned int extension_id = get_extension_chip_id();
+
+ if (cpu_is_sam9x60()) {
+ switch (extension_id) {
+ case ARCH_EXID_SAM9X60:
+ return "SAM9X60";
+ default:
+ return "Unknown CPU type";
+ }
+ } else {
+ return "Unknown CPU type";
+ }
+}
+
+void at91_seriald_hw_init(void)
+{
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 1); /* DRXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
+
+ at91_periph_clk_enable(ATMEL_ID_DBGU);
+}
+
+void at91_mci_hw_init(void)
+{
+ /* Initialize the SDMMC0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 1); /* CLK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 1); /* CMD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 1); /* DAT0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 1); /* DAT1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 1); /* DAT2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 1); /* DAT3 */
+
+ at91_periph_clk_enable(ATMEL_ID_SDMMC0);
+}
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+ if (has_emac0()) {
+ /* Enable EMAC0 clock */
+ at91_periph_clk_enable(ATMEL_ID_EMAC0);
+ /* EMAC0 pins setup */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */
+ }
+
+ if (has_emac1()) {
+ /* Enable EMAC1 clock */
+ at91_periph_clk_enable(ATMEL_ID_EMAC1);
+ /* EMAC1 pins setup */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */
+ }
+
+#ifndef CONFIG_RMII
+ /* Only emac0 support MII */
+ if (has_emac0()) {
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */
+ }
+#endif
+}
+#endif