Merge branch 'master' of git://git.denx.de/u-boot-socfpga
diff --git a/Makefile b/Makefile
index 25ef3c1..ea7fd00 100644
--- a/Makefile
+++ b/Makefile
@@ -648,6 +648,7 @@
libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/common/
libs-y += drivers/usb/emul/
libs-y += drivers/usb/eth/
libs-y += drivers/usb/gadget/
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 75773bd..9d185a6 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -284,6 +284,13 @@
#define insw_p(port,to,len) insw(port,to,len)
#define insl_p(port,to,len) insl(port,to,len)
+#define writesl(a, d, s) __raw_writesl((unsigned long)a, d, s)
+#define readsl(a, d, s) __raw_readsl((unsigned long)a, d, s)
+#define writesw(a, d, s) __raw_writesw((unsigned long)a, d, s)
+#define readsw(a, d, s) __raw_readsw((unsigned long)a, d, s)
+#define writesb(a, d, s) __raw_writesb((unsigned long)a, d, s)
+#define readsb(a, d, s) __raw_readsb((unsigned long)a, d, s)
+
/*
* ioremap and friends.
*
diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi
index 7d180d9..8a554f9 100644
--- a/arch/mips/dts/pic32mzda.dtsi
+++ b/arch/mips/dts/pic32mzda.dtsi
@@ -171,4 +171,16 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ usb: musb@1f8e3000 {
+ compatible = "microchip,pic32mzda-usb";
+ reg = <0x1f8e3000 0x1000>,
+ <0x1f884000 0x1000>;
+ reg-names = "mc", "control";
+ interrupts = <132 IRQ_TYPE_EDGE_RISING>,
+ <133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock PB5CLK>;
+ clock-names = "usb_clk";
+ status = "disabled";
+ };
};
diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts
index e5ce0bd..0a7847e 100644
--- a/arch/mips/dts/pic32mzda_sk.dts
+++ b/arch/mips/dts/pic32mzda_sk.dts
@@ -52,4 +52,8 @@
ethernet_phy: lan8740_phy@0 {
reg = <0>;
};
+};
+
+&usb {
+ status = "okay";
};
\ No newline at end of file
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 235a635..aa519b0 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -82,7 +82,6 @@
void cpu_init_early_f(void *fdt)
{
u32 mas0, mas1, mas2, mas3, mas7;
- int i;
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
@@ -90,17 +89,13 @@
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
u32 *dst, *src;
void (*setup_ifc_sram)(void);
+ int i;
#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
- /*
- * Clear initial global data
- * we don't use memset so we can share this code with NAND_SPL
- */
- for (i = 0; i < sizeof(gd_t); i++)
- ((char *)gd)[i] = 0;
+ /* gd area was zeroed during startup */
#ifdef CONFIG_QEMU_E500
/*
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index d867e2a..82a151a 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1152,6 +1152,36 @@
/* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
lis r3,(CONFIG_SYS_INIT_RAM_ADDR)@h
ori r3,r3,((CONFIG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */
+
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+
+#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE
+#error "CONFIG_SYS_MALLOC_F_LEN too large to fit into initial RAM."
+#endif
+
+ /* Leave 16+ byte for back chain termination and NULL return address */
+ subi r3,r3,((CONFIG_SYS_MALLOC_F_LEN+16+15)&~0xf)
+#endif
+
+ /* End of RAM */
+ lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h
+ ori r4,r4,(CONFIG_SYS_INIT_RAM_SIZE)@l
+
+ li r0,0
+
+1: subi r4,r4,4
+ stw r0,0(r4)
+ cmplw r4,r3
+ bne 1b
+
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+ lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h
+ ori r4,r4,(CONFIG_SYS_GBL_DATA_OFFSET)@l
+
+ addi r3,r3,16 /* Pre-relocation malloc area */
+ stw r3,GD_MALLOC_BASE(r4)
+ subi r3,r3,16
+#endif
li r0,0
stw r0,0(r3) /* Terminate Back Chain */
stw r0,+4(r3) /* NULL return address. */
diff --git a/cmd/usb.c b/cmd/usb.c
index 9ed5dc6..f1a7deb 100644
--- a/cmd/usb.c
+++ b/cmd/usb.c
@@ -15,6 +15,7 @@
#include <command.h>
#include <console.h>
#include <dm.h>
+#include <dm/uclass-internal.h>
#include <memalign.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
@@ -442,12 +443,15 @@
#ifdef CONFIG_DM_USB
struct udevice *bus;
- for (uclass_first_device(UCLASS_USB, &bus);
+ for (uclass_find_first_device(UCLASS_USB, &bus);
bus;
- uclass_next_device(&bus)) {
+ uclass_find_next_device(&bus)) {
struct usb_device *udev;
struct udevice *dev;
+ if (!device_active(bus))
+ continue;
+
device_find_first_child(bus, &dev);
if (dev && device_active(dev)) {
udev = dev_get_parent_priv(dev);
@@ -541,7 +545,7 @@
static int do_usb_stop_keyboard(int force)
{
-#ifdef CONFIG_USB_KEYBOARD
+#if !defined CONFIG_DM_USB && defined CONFIG_USB_KEYBOARD
if (usb_kbd_deregister(force) != 0) {
printf("USB not stopped: usbkbd still using USB\n");
return 1;
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index d84865f..97f79f8 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -566,7 +566,6 @@
/* No USB Keyboard found */
return -1;
}
-#endif
/* Deregister the keyboard. */
int usb_kbd_deregister(int force)
@@ -599,6 +598,8 @@
#endif
}
+#endif
+
#ifdef CONFIG_DM_USB
static int usb_kbd_probe(struct udevice *dev)
diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
index 4017983..eba6cd5 100644
--- a/configs/pic32mzdask_defconfig
+++ b/configs/pic32mzdask_defconfig
@@ -14,6 +14,7 @@
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_RARP=y
@@ -30,5 +31,10 @@
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_FULL is not set
CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_PIC32=y
+CONFIG_USB_STORAGE=y
CONFIG_USE_TINY_PRINTF=y
CONFIG_CMD_DHRYSTONE=y
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 9392742..d529467 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -19,14 +19,6 @@
#include "pxa3xx_nand.h"
-/* Some U-Boot compatibility macros */
-#define writesl(a, d, s) __raw_writesl((unsigned long)a, d, s)
-#define readsl(a, d, s) __raw_readsl((unsigned long)a, d, s)
-#define writesw(a, d, s) __raw_writesw((unsigned long)a, d, s)
-#define readsw(a, d, s) __raw_readsw((unsigned long)a, d, s)
-#define writesb(a, d, s) __raw_writesb((unsigned long)a, d, s)
-#define readsb(a, d, s) __raw_readsb((unsigned long)a, d, s)
-
#define TIMEOUT_DRAIN_FIFO 5 /* in ms */
#define CHIP_DELAY_TIMEOUT 200
#define NAND_STOP_DELAY 40
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
new file mode 100644
index 0000000..2f3d43d
--- /dev/null
+++ b/drivers/usb/common/Makefile
@@ -0,0 +1,7 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o
+obj-$(CONFIG_USB_XHCI_FSL) += fsl-dt-fixup.o
diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
new file mode 100644
index 0000000..6f31932
--- /dev/null
+++ b/drivers/usb/common/fsl-dt-fixup.c
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2009, 2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB
+ *
+ * Author: Tor Krill tor@excito.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <hwconfig.h>
+#include <fsl_usb.h>
+#include <fdt_support.h>
+
+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#endif
+
+static const char * const compat_usb_fsl[] = {
+ "fsl-usb2-mph",
+ "fsl-usb2-dr",
+ "snps,dwc3",
+ NULL
+};
+
+static int fdt_usb_get_node_type(void *blob, int start_offset,
+ int *node_offset, const char **node_type)
+{
+ int i;
+ int ret = -ENOENT;
+
+ for (i = 0; compat_usb_fsl[i]; i++) {
+ *node_offset = fdt_node_offset_by_compatible
+ (blob, start_offset,
+ compat_usb_fsl[i]);
+ if (*node_offset >= 0) {
+ *node_type = compat_usb_fsl[i];
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
+ const char *phy_type, int start_offset)
+{
+ const char *prop_mode = "dr_mode";
+ const char *prop_type = "phy_type";
+ const char *node_type = NULL;
+ int node_offset;
+ int err;
+
+ err = fdt_usb_get_node_type(blob, start_offset,
+ &node_offset, &node_type);
+ if (err < 0)
+ return err;
+
+ if (mode) {
+ err = fdt_setprop(blob, node_offset, prop_mode, mode,
+ strlen(mode) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_mode, node_type, fdt_strerror(err));
+ }
+
+ if (phy_type) {
+ err = fdt_setprop(blob, node_offset, prop_type, phy_type,
+ strlen(phy_type) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_type, node_type, fdt_strerror(err));
+ }
+
+ return node_offset;
+}
+
+static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
+ int start_offset)
+{
+ int node_offset, err;
+ const char *node_type = NULL;
+
+ err = fdt_usb_get_node_type(blob, start_offset,
+ &node_offset, &node_type);
+ if (err < 0)
+ return err;
+
+ err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
+ if (err < 0) {
+ printf("ERROR: could not set %s for %s: %s.\n",
+ prop_erratum, node_type, fdt_strerror(err));
+ }
+
+ return node_offset;
+}
+
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+ static const char * const modes[] = { "host", "peripheral", "otg" };
+ static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" };
+ int usb_erratum_a006261_off = -1;
+ int usb_erratum_a007075_off = -1;
+ int usb_erratum_a007792_off = -1;
+ int usb_erratum_a005697_off = -1;
+ int usb_mode_off = -1;
+ int usb_phy_off = -1;
+ char str[5];
+ int i, j;
+
+ for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+ const char *dr_mode_type = NULL;
+ const char *dr_phy_type = NULL;
+ int mode_idx = -1, phy_idx = -1;
+
+ snprintf(str, 5, "%s%d", "usb", i);
+ if (hwconfig(str)) {
+ for (j = 0; j < ARRAY_SIZE(modes); j++) {
+ if (hwconfig_subarg_cmp(str, "dr_mode",
+ modes[j])) {
+ mode_idx = j;
+ break;
+ }
+ }
+
+ for (j = 0; j < ARRAY_SIZE(phys); j++) {
+ if (hwconfig_subarg_cmp(str, "phy_type",
+ phys[j])) {
+ phy_idx = j;
+ break;
+ }
+ }
+
+ if (mode_idx < 0 && phy_idx < 0) {
+ printf("WARNING: invalid phy or mode\n");
+ return;
+ }
+
+ if (mode_idx > -1)
+ dr_mode_type = modes[mode_idx];
+
+ if (phy_idx > -1)
+ dr_phy_type = phys[phy_idx];
+ }
+
+ if (has_dual_phy())
+ dr_phy_type = phys[2];
+
+ usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+ dr_mode_type, NULL,
+ usb_mode_off);
+
+ if (usb_mode_off < 0)
+ return;
+
+ usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+ NULL, dr_phy_type,
+ usb_phy_off);
+
+ if (usb_phy_off < 0)
+ return;
+
+ if (has_erratum_a006261()) {
+ usb_erratum_a006261_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a006261",
+ usb_erratum_a006261_off);
+ if (usb_erratum_a006261_off < 0)
+ return;
+ }
+
+ if (has_erratum_a007075()) {
+ usb_erratum_a007075_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a007075",
+ usb_erratum_a007075_off);
+ if (usb_erratum_a007075_off < 0)
+ return;
+ }
+
+ if (has_erratum_a007792()) {
+ usb_erratum_a007792_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a007792",
+ usb_erratum_a007792_off);
+ if (usb_erratum_a007792_off < 0)
+ return;
+ }
+ if (has_erratum_a005697()) {
+ usb_erratum_a005697_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a005697",
+ usb_erratum_a005697_off);
+ if (usb_erratum_a005697_off < 0)
+ return;
+ }
+ }
+}
diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c b/drivers/usb/gadget/bcm_udc_otg_phy.c
index 10b2e13..877f162 100644
--- a/drivers/usb/gadget/bcm_udc_otg_phy.c
+++ b/drivers/usb/gadget/bcm_udc_otg_phy.c
@@ -8,12 +8,16 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
#include "dwc2_udc_otg_priv.h"
#include "bcm_udc_otg.h"
void otg_phy_init(struct dwc2_udc *dev)
{
+ /* turn on the USB OTG clocks */
+ clk_usb_otg_enable((void *)HSOTG_BASE_ADDR);
+
/* set Phy to driving mode */
wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 4bcea9d..a43d37d 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -173,198 +173,3 @@
cmd |= TXFIFO_THRESH(txfifo_thresh);
ehci_writel(&ehci->txfilltuning, cmd);
}
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
- const char *phy_type, int start_offset)
-{
- const char *compat_dr = "fsl-usb2-dr";
- const char *compat_mph = "fsl-usb2-mph";
- const char *prop_mode = "dr_mode";
- const char *prop_type = "phy_type";
- const char *node_type = NULL;
- int node_offset;
- int err;
-
- node_offset = fdt_node_offset_by_compatible(blob,
- start_offset, compat_mph);
- if (node_offset < 0) {
- node_offset = fdt_node_offset_by_compatible(blob,
- start_offset,
- compat_dr);
- if (node_offset < 0) {
- printf("WARNING: could not find compatible node: %s",
- fdt_strerror(node_offset));
- return -1;
- }
- node_type = compat_dr;
- } else {
- node_type = compat_mph;
- }
-
- if (mode) {
- err = fdt_setprop(blob, node_offset, prop_mode, mode,
- strlen(mode) + 1);
- if (err < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop_mode, node_type, fdt_strerror(err));
- }
-
- if (phy_type) {
- err = fdt_setprop(blob, node_offset, prop_type, phy_type,
- strlen(phy_type) + 1);
- if (err < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop_type, node_type, fdt_strerror(err));
- }
-
- return node_offset;
-}
-
-static const char *fdt_usb_get_node_type(void *blob, int start_offset,
- int *node_offset)
-{
- const char *compat_dr = "fsl-usb2-dr";
- const char *compat_mph = "fsl-usb2-mph";
- const char *node_type = NULL;
-
- *node_offset = fdt_node_offset_by_compatible(blob, start_offset,
- compat_mph);
- if (*node_offset < 0) {
- *node_offset = fdt_node_offset_by_compatible(blob,
- start_offset,
- compat_dr);
- if (*node_offset < 0) {
- printf("ERROR: could not find compatible node: %s\n",
- fdt_strerror(*node_offset));
- } else {
- node_type = compat_dr;
- }
- } else {
- node_type = compat_mph;
- }
-
- return node_type;
-}
-
-static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
- int start_offset)
-{
- int node_offset, err;
- const char *node_type = NULL;
-
- node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
- if (!node_type)
- return -1;
-
- err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
- if (err < 0) {
- printf("ERROR: could not set %s for %s: %s.\n",
- prop_erratum, node_type, fdt_strerror(err));
- }
-
- return node_offset;
-}
-
-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-{
- static const char * const modes[] = { "host", "peripheral", "otg" };
- static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" };
- int usb_erratum_a006261_off = -1;
- int usb_erratum_a007075_off = -1;
- int usb_erratum_a007792_off = -1;
- int usb_erratum_a005697_off = -1;
- int usb_mode_off = -1;
- int usb_phy_off = -1;
- char str[5];
- int i, j;
-
- for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
- const char *dr_mode_type = NULL;
- const char *dr_phy_type = NULL;
- int mode_idx = -1, phy_idx = -1;
-
- snprintf(str, 5, "%s%d", "usb", i);
- if (hwconfig(str)) {
- for (j = 0; j < ARRAY_SIZE(modes); j++) {
- if (hwconfig_subarg_cmp(str, "dr_mode",
- modes[j])) {
- mode_idx = j;
- break;
- }
- }
-
- for (j = 0; j < ARRAY_SIZE(phys); j++) {
- if (hwconfig_subarg_cmp(str, "phy_type",
- phys[j])) {
- phy_idx = j;
- break;
- }
- }
-
- if (mode_idx < 0 && phy_idx < 0) {
- printf("WARNING: invalid phy or mode\n");
- return;
- }
-
- if (mode_idx > -1)
- dr_mode_type = modes[mode_idx];
-
- if (phy_idx > -1)
- dr_phy_type = phys[phy_idx];
- }
-
- if (has_dual_phy())
- dr_phy_type = phys[2];
-
- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
- dr_mode_type, NULL,
- usb_mode_off);
-
- if (usb_mode_off < 0)
- return;
-
- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
- NULL, dr_phy_type,
- usb_phy_off);
-
- if (usb_phy_off < 0)
- return;
-
- if (has_erratum_a006261()) {
- usb_erratum_a006261_off = fdt_fixup_usb_erratum
- (blob,
- "fsl,usb-erratum-a006261",
- usb_erratum_a006261_off);
- if (usb_erratum_a006261_off < 0)
- return;
- }
-
- if (has_erratum_a007075()) {
- usb_erratum_a007075_off = fdt_fixup_usb_erratum
- (blob,
- "fsl,usb-erratum-a007075",
- usb_erratum_a007075_off);
- if (usb_erratum_a007075_off < 0)
- return;
- }
-
- if (has_erratum_a007792()) {
- usb_erratum_a007792_off = fdt_fixup_usb_erratum
- (blob,
- "fsl,usb-erratum-a007792",
- usb_erratum_a007792_off);
- if (usb_erratum_a007792_off < 0)
- return;
- }
- if (has_erratum_a005697()) {
- usb_erratum_a005697_off = fdt_fixup_usb_erratum
- (blob,
- "fsl,usb-erratum-a005697",
- usb_erratum_a005697_off);
- if (usb_erratum_a005697_off < 0)
- return;
- }
- }
-}
-#endif
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 598f444..fa5d584 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1615,8 +1615,8 @@
if (ret)
goto err;
- if (ops->init_after_reset) {
- ret = ops->init_after_reset(ctrl);
+ if (ctrl->ops.init_after_reset) {
+ ret = ctrl->ops.init_after_reset(ctrl);
if (ret)
goto err;
}
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
index 6a6cb93..4e8a543 100644
--- a/drivers/usb/musb-new/Kconfig
+++ b/drivers/usb/musb-new/Kconfig
@@ -15,6 +15,13 @@
if USB_MUSB_HOST || USB_MUSB_GADGET
+config USB_MUSB_PIC32
+ bool "Enable Microchip PIC32 DRC USB controller"
+ depends on DM_USB && MACH_PIC32
+ help
+ Say y to enable PIC32 USB DRC controller support
+ if it is available on your Microchip PIC32 platform.
+
config USB_MUSB_SUNXI
bool "Enable sunxi OTG / DRC USB controller"
depends on ARCH_SUNXI
diff --git a/drivers/usb/musb-new/Makefile b/drivers/usb/musb-new/Makefile
index 072d516..df1c3c8 100644
--- a/drivers/usb/musb-new/Makefile
+++ b/drivers/usb/musb-new/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o
obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o
obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
+obj-$(CONFIG_USB_MUSB_PIC32) += pic32.o
obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
ccflags-y := $(call cc-option,-Wno-unused-variable) \
diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h
index 1fc9391..9244977 100644
--- a/drivers/usb/musb-new/linux-compat.h
+++ b/drivers/usb/musb-new/linux-compat.h
@@ -13,13 +13,6 @@
printf(fmt, ##args); \
ret_warn; })
-#define writesl(a, d, s) __raw_writesl((unsigned long)a, d, s)
-#define readsl(a, d, s) __raw_readsl((unsigned long)a, d, s)
-#define writesw(a, d, s) __raw_writesw((unsigned long)a, d, s)
-#define readsw(a, d, s) __raw_readsw((unsigned long)a, d, s)
-#define writesb(a, d, s) __raw_writesb((unsigned long)a, d, s)
-#define readsb(a, d, s) __raw_readsb((unsigned long)a, d, s)
-
#define device_init_wakeup(dev, a) do {} while (0)
#define platform_data device_data
diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c
index a6d6af6..dd0443c 100644
--- a/drivers/usb/musb-new/musb_core.c
+++ b/drivers/usb/musb-new/musb_core.c
@@ -259,7 +259,7 @@
}
}
-#if !defined(CONFIG_USB_MUSB_AM35X)
+#if !defined(CONFIG_USB_MUSB_AM35X) && !defined(CONFIG_USB_MUSB_PIC32)
/*
* Unload an endpoint's FIFO
*/
diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
index 233a0e4..6ce528c 100644
--- a/drivers/usb/musb-new/musb_uboot.c
+++ b/drivers/usb/musb-new/musb_uboot.c
@@ -237,8 +237,10 @@
if (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_HM)
break;
} while (get_timer(0) < timeout);
- if (get_timer(0) >= timeout)
+ if (get_timer(0) >= timeout) {
+ musb_stop(host->host);
return -ENODEV;
+ }
_musb_reset_root_port(host, NULL);
host->host->is_active = 1;
diff --git a/drivers/usb/musb-new/pic32.c b/drivers/usb/musb-new/pic32.c
new file mode 100644
index 0000000..c888c64
--- /dev/null
+++ b/drivers/usb/musb-new/pic32.c
@@ -0,0 +1,288 @@
+/*
+ * Microchip PIC32 MUSB "glue layer"
+ *
+ * Copyright (C) 2015, Microchip Technology Inc.
+ * Cristian Birsan <cristian.birsan@microchip.com>
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Based on the dsps "glue layer" code.
+ */
+
+#include <common.h>
+#include <linux/usb/musb.h>
+#include "linux-compat.h"
+#include "musb_core.h"
+#include "musb_uboot.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define PIC32_TX_EP_MASK 0x0f /* EP0 + 7 Tx EPs */
+#define PIC32_RX_EP_MASK 0x0e /* 7 Rx EPs */
+
+#define MUSB_SOFTRST 0x7f
+#define MUSB_SOFTRST_NRST BIT(0)
+#define MUSB_SOFTRST_NRSTX BIT(1)
+
+#define USBCRCON 0
+#define USBCRCON_USBWKUPEN BIT(0) /* Enable Wakeup Interrupt */
+#define USBCRCON_USBRIE BIT(1) /* Enable Remote resume Interrupt */
+#define USBCRCON_USBIE BIT(2) /* Enable USB General interrupt */
+#define USBCRCON_SENDMONEN BIT(3) /* Enable Session End VBUS monitoring */
+#define USBCRCON_BSVALMONEN BIT(4) /* Enable B-Device VBUS monitoring */
+#define USBCRCON_ASVALMONEN BIT(5) /* Enable A-Device VBUS monitoring */
+#define USBCRCON_VBUSMONEN BIT(6) /* Enable VBUS monitoring */
+#define USBCRCON_PHYIDEN BIT(7) /* PHY ID monitoring enable */
+#define USBCRCON_USBIDVAL BIT(8) /* USB ID value */
+#define USBCRCON_USBIDOVEN BIT(9) /* USB ID override enable */
+#define USBCRCON_USBWK BIT(24) /* USB Wakeup Status */
+#define USBCRCON_USBRF BIT(25) /* USB Resume Status */
+#define USBCRCON_USBIF BIT(26) /* USB General Interrupt Status */
+
+/* PIC32 controller data */
+struct pic32_musb_data {
+ struct musb_host_data mdata;
+ struct device dev;
+ void __iomem *musb_glue;
+};
+
+#define to_pic32_musb_data(d) \
+ container_of(d, struct pic32_musb_data, dev)
+
+static void pic32_musb_disable(struct musb *musb)
+{
+ /* no way to shut the controller */
+}
+
+static int pic32_musb_enable(struct musb *musb)
+{
+ /* soft reset by NRSTx */
+ musb_writeb(musb->mregs, MUSB_SOFTRST, MUSB_SOFTRST_NRSTX);
+ /* set mode */
+ musb_platform_set_mode(musb, musb->board_mode);
+
+ return 0;
+}
+
+static irqreturn_t pic32_interrupt(int irq, void *hci)
+{
+ struct musb *musb = hci;
+ irqreturn_t ret = IRQ_NONE;
+ u32 epintr, usbintr;
+
+ /* ack usb core interrupts */
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ if (musb->int_usb)
+ musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
+
+ /* ack endpoint interrupts */
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX) & PIC32_RX_EP_MASK;
+ if (musb->int_rx)
+ musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
+
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX) & PIC32_TX_EP_MASK;
+ if (musb->int_tx)
+ musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
+
+ /* drop spurious RX and TX if device is disconnected */
+ if (musb->int_usb & MUSB_INTR_DISCONNECT) {
+ musb->int_tx = 0;
+ musb->int_rx = 0;
+ }
+
+ if (musb->int_tx || musb->int_rx || musb->int_usb)
+ ret = musb_interrupt(musb);
+
+ return ret;
+}
+
+static int pic32_musb_set_mode(struct musb *musb, u8 mode)
+{
+ struct device *dev = musb->controller;
+ struct pic32_musb_data *pdata = to_pic32_musb_data(dev);
+
+ switch (mode) {
+ case MUSB_HOST:
+ clrsetbits_le32(pdata->musb_glue + USBCRCON,
+ USBCRCON_USBIDVAL, USBCRCON_USBIDOVEN);
+ break;
+ case MUSB_PERIPHERAL:
+ setbits_le32(pdata->musb_glue + USBCRCON,
+ USBCRCON_USBIDVAL | USBCRCON_USBIDOVEN);
+ break;
+ case MUSB_OTG:
+ dev_err(dev, "support for OTG is unimplemented\n");
+ break;
+ default:
+ dev_err(dev, "unsupported mode %d\n", mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int pic32_musb_init(struct musb *musb)
+{
+ struct pic32_musb_data *pdata = to_pic32_musb_data(musb->controller);
+ u32 ctrl, hwvers;
+ u8 power;
+
+ /* Returns zero if not clocked */
+ hwvers = musb_read_hwvers(musb->mregs);
+ if (!hwvers)
+ return -ENODEV;
+
+ /* Reset the musb */
+ power = musb_readb(musb->mregs, MUSB_POWER);
+ power = power | MUSB_POWER_RESET;
+ musb_writeb(musb->mregs, MUSB_POWER, power);
+ mdelay(100);
+
+ /* Start the on-chip PHY and its PLL. */
+ power = power & ~MUSB_POWER_RESET;
+ musb_writeb(musb->mregs, MUSB_POWER, power);
+
+ musb->isr = pic32_interrupt;
+
+ ctrl = USBCRCON_USBIF | USBCRCON_USBRF |
+ USBCRCON_USBWK | USBCRCON_USBIDOVEN |
+ USBCRCON_PHYIDEN | USBCRCON_USBIE |
+ USBCRCON_USBRIE | USBCRCON_USBWKUPEN |
+ USBCRCON_VBUSMONEN;
+ writel(ctrl, pdata->musb_glue + USBCRCON);
+
+ return 0;
+}
+
+/* PIC32 supports only 32bit read operation */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+ void __iomem *fifo = hw_ep->fifo;
+ u32 val, rem = len % 4;
+
+ /* USB stack ensures dst is always 32bit aligned. */
+ readsl(fifo, dst, len / 4);
+ if (rem) {
+ dst += len & ~0x03;
+ val = musb_readl(fifo, 0);
+ memcpy(dst, &val, rem);
+ }
+}
+
+const struct musb_platform_ops pic32_musb_ops = {
+ .init = pic32_musb_init,
+ .set_mode = pic32_musb_set_mode,
+ .disable = pic32_musb_disable,
+ .enable = pic32_musb_enable,
+};
+
+/* PIC32 default FIFO config - fits in 8KB */
+static struct musb_fifo_cfg pic32_musb_fifo_config[] = {
+ { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, },
+};
+
+static struct musb_hdrc_config pic32_musb_config = {
+ .fifo_cfg = pic32_musb_fifo_config,
+ .fifo_cfg_size = ARRAY_SIZE(pic32_musb_fifo_config),
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 8,
+ .ram_bits = 11,
+};
+
+/* PIC32 has one MUSB controller which can be host or gadget */
+static struct musb_hdrc_platform_data pic32_musb_plat = {
+ .mode = MUSB_HOST,
+ .config = &pic32_musb_config,
+ .power = 250, /* 500mA */
+ .platform_ops = &pic32_musb_ops,
+};
+
+static int musb_usb_probe(struct udevice *dev)
+{
+ struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+ struct pic32_musb_data *pdata = dev_get_priv(dev);
+ struct musb_host_data *mdata = &pdata->mdata;
+ struct fdt_resource mc, glue;
+ void *fdt = (void *)gd->fdt_blob;
+ int node = dev->of_offset;
+ void __iomem *mregs;
+ int ret;
+
+ priv->desc_before_addr = true;
+
+ ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
+ "mc", &mc);
+ if (ret < 0) {
+ printf("pic32-musb: resource \"mc\" not found\n");
+ return ret;
+ }
+
+ ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
+ "control", &glue);
+ if (ret < 0) {
+ printf("pic32-musb: resource \"control\" not found\n");
+ return ret;
+ }
+
+ mregs = ioremap(mc.start, fdt_resource_size(&mc));
+ pdata->musb_glue = ioremap(glue.start, fdt_resource_size(&glue));
+
+ /* init controller */
+#ifdef CONFIG_USB_MUSB_HOST
+ mdata->host = musb_init_controller(&pic32_musb_plat,
+ &pdata->dev, mregs);
+ if (!mdata->host)
+ return -EIO;
+
+ ret = musb_lowlevel_init(mdata);
+#else
+ pic32_musb_plat.mode = MUSB_PERIPHERAL;
+ ret = musb_register(&pic32_musb_plat, &pdata->dev, mregs);
+#endif
+ if (ret == 0)
+ printf("PIC32 MUSB OTG\n");
+
+ return ret;
+}
+
+static int musb_usb_remove(struct udevice *dev)
+{
+ struct pic32_musb_data *pdata = dev_get_priv(dev);
+
+ musb_stop(pdata->mdata.host);
+
+ return 0;
+}
+
+static const struct udevice_id pic32_musb_ids[] = {
+ { .compatible = "microchip,pic32mzda-usb" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_musb) = {
+ .name = "pic32-musb",
+ .id = UCLASS_USB,
+ .of_match = pic32_musb_ids,
+ .probe = musb_usb_probe,
+ .remove = musb_usb_remove,
+#ifdef CONFIG_USB_MUSB_HOST
+ .ops = &musb_usb_ops,
+#endif
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct pic32_musb_data),
+};
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index be1d2ec..3081afc 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -201,6 +201,7 @@
/* musb_core does not call enable / disable in a balanced manner <sigh> */
static bool enabled = false;
+static struct musb *sunxi_musb;
static int sunxi_musb_enable(struct musb *musb)
{
@@ -320,13 +321,15 @@
priv->desc_before_addr = true;
- if (!host->host) {
- host->host = musb_init_controller(&musb_plat, NULL,
+ if (!sunxi_musb) {
+ sunxi_musb = musb_init_controller(&musb_plat, NULL,
(void *)SUNXI_USB0_BASE);
- if (!host->host)
- return -EIO;
}
+ host->host = sunxi_musb;
+ if (!host->host)
+ return -EIO;
+
ret = musb_lowlevel_init(host);
if (ret == 0)
printf("MUSB OTG\n");
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 9c32a01..e870ffe 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -215,9 +215,9 @@
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_END 0x00004000/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 9f7ceb8..108e924 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -396,9 +396,9 @@
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 4cbc9ad..a7a5e8e 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -329,9 +329,9 @@
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000
-#define CONFIG_SYS_INIT_RAM_END 0x00004000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 81af871..249e11b 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -555,9 +555,9 @@
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index aa0f802..f52889d 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -677,7 +677,7 @@
/* Enable VSC9953 L2 Switch driver */
#define CONFIG_VSC9953
-#define CONFIG_VSC9953_CMD
+#define CONFIG_CMD_ETHSW
#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14
#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index cf931a6..31348da 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -141,9 +141,9 @@
/* Use SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index 750d8ff..57421c6 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -289,9 +289,9 @@
/* Use SRAM for initial stack */
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 9f9bcb8..bbeed76 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -238,10 +238,10 @@
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
-#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
diff --git a/include/configs/io.h b/include/configs/io.h
index 1213fe2..f05eb0a 100644
--- a/include/configs/io.h
+++ b/include/configs/io.h
@@ -196,10 +196,10 @@
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
-#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
diff --git a/include/configs/iocon.h b/include/configs/iocon.h
index 8bc89a0..f75ca76 100644
--- a/include/configs/iocon.h
+++ b/include/configs/iocon.h
@@ -249,10 +249,10 @@
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
-#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
index 73a44a7..4ffab8a 100644
--- a/include/configs/o2dnt-common.h
+++ b/include/configs/o2dnt-common.h
@@ -253,13 +253,13 @@
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
#ifdef CONFIG_POST
/* preserve space for the post_word at end of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE
#else
/* End of used area in DPRAM */
-#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
#endif
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
index 3ea1194..78faaec 100644
--- a/include/configs/pic32mzdask.h
+++ b/include/configs/pic32mzdask.h
@@ -105,6 +105,12 @@
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_MMC
+/*--------------------------------------------------
+ * USB Configuration
+ */
+#define CONFIG_USB_MUSB_PIO_ONLY
+#define CONFIG_SYS_CACHELINE_SIZE 16
+
/*-----------------------------------------------------------------------
* File System Configuration
*/
@@ -153,6 +159,7 @@
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
+ func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 296add0..d34e959 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -113,11 +113,11 @@
*/
int fdt_fixup_display(void *blob, const char *path, const char *display);
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
void fdt_fixup_dr_usb(void *blob, bd_t *bd);
#else
static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
+#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
#if defined(CONFIG_SYS_FSL_SEC_COMPAT)
void fdt_fixup_crypto_node(void *blob, int sec_rev);
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index ba166eb..379c493 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -263,12 +263,14 @@
b transfer_to_handler
#define STD_EXCEPTION(n, label, hdlr) \
+.align 4; \
label: \
EXCEPTION_PROLOG(SRR0, SRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(n, label, hdlr, MSR_KERNEL, NOCOPY) \
#define CRIT_EXCEPTION(n, label, hdlr) \
+.align 4; \
label: \
EXCEPTION_PROLOG(CSRR0, CSRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
@@ -276,6 +278,7 @@
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
#define MCK_EXCEPTION(n, label, hdlr) \
+.align 4; \
label: \
EXCEPTION_PROLOG(MCSRR0, MCSRR1); \
addi r3,r1,STACK_FRAME_OVERHEAD; \