sh: serial: coding style cleanup
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 1d76a19..e47ec2e 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -49,7 +49,7 @@
# define SCFRDR (vu_char *)(SCIF_BASE + 0x24)
#else
# define SCFTDR (vu_char *)(SCIF_BASE + 0xC)
-# define SCFSR (vu_short *)(SCIF_BASE + 0x10)
+# define SCFSR (vu_short *)(SCIF_BASE + 0x10)
# define SCFRDR (vu_char *)(SCIF_BASE + 0x14)
#endif
@@ -64,7 +64,7 @@
#elif defined(CONFIG_CPU_SH7763)
# if defined(CONFIG_CONS_SCIF2)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
-# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
+# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0x1F
# else
@@ -90,7 +90,7 @@
defined(CONFIG_CPU_SH7722) || \
defined(CONFIG_CPU_SH7203)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
-# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
+# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0x1F
#elif defined(CONFIG_CPU_SH7720)
@@ -106,31 +106,32 @@
/* SCBRR register value setting */
#if defined(CONFIG_CPU_SH7720)
-# define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
+# define SCBRR_VALUE(bps, clk) (((clk * 2) + 16 * bps) / (32 * bps) - 1)
#elif defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A)
/* SH7723 SCIFA use bus clock. So clock *2 */
-# define SCBRR_VALUE(bps, clk) (((clk*2*2)+16*bps)/(32*bps)-1)
+# define SCBRR_VALUE(bps, clk) (((clk * 2 * 2) + 16 * bps) / (32 * bps) - 1)
#else /* Generic SuperH */
-# define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
+# define SCBRR_VALUE(bps, clk) ((clk + 16 * bps) / (32 * bps) - 1)
#endif
-#define SCR_RE (1 << 4)
-#define SCR_TE (1 << 5)
+#define SCR_RE (1 << 4)
+#define SCR_TE (1 << 5)
#define FCR_RFRST (1 << 1) /* RFCL */
#define FCR_TFRST (1 << 2) /* TFCL */
-#define FSR_DR (1 << 0)
-#define FSR_RDF (1 << 1)
-#define FSR_FER (1 << 3)
-#define FSR_BRK (1 << 4)
-#define FSR_FER (1 << 3)
-#define FSR_TEND (1 << 6)
-#define FSR_ER (1 << 7)
+#define FSR_DR (1 << 0)
+#define FSR_RDF (1 << 1)
+#define FSR_FER (1 << 3)
+#define FSR_BRK (1 << 4)
+#define FSR_FER (1 << 3)
+#define FSR_TEND (1 << 6)
+#define FSR_ER (1 << 7)
/*----------------------------------------------------------------------*/
void serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
+
*SCBRR = SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ);
}
@@ -191,8 +192,8 @@
return serial_rx_fifo_level() ? 1 : 0;
}
-#define FSR_ERR_CLEAR 0x0063
-#define RDRF_CLEAR 0x00fc
+#define FSR_ERR_CLEAR 0x0063
+#define RDRF_CLEAR 0x00fc
void handle_error(void)
{