tegra: video: Convert tegra20 LCD driver to driver model
Move this driver over to use driver model. This involves rearranging the
code somewhat. The effect is that everything is run from the probe() method.
Boards which use this are fixed up, but only seaboard is tested.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
index 8fc9c06..bb2601f 100644
--- a/drivers/video/tegra.c
+++ b/drivers/video/tegra.c
@@ -2,11 +2,11 @@
* Copyright (c) 2011 The Chromium OS Authors.
* SPDX-License-Identifier: GPL-2.0+
*/
-
+#define DEBUG
#include <common.h>
+#include <dm.h>
#include <fdtdec.h>
-#include <lcd.h>
-
+#include <video.h>
#include <asm/system.h>
#include <asm/gpio.h>
#include <asm/io.h>
@@ -36,7 +36,6 @@
/* Information about the display controller */
struct tegra_lcd_priv {
- int valid; /* config is valid */
int width; /* width in pixels */
int height; /* height in pixels */
int bpp; /* number of bits per pixel */
@@ -69,20 +68,11 @@
uint panel_timings[FDT_LCD_TIMINGS];
};
-/* Our LCD config, set up in handle_stage() */
-static struct tegra_lcd_priv config;
-struct tegra_lcd_priv *disp_config; /* Display controller config */
-
enum {
/* Maximum LCD size we support */
LCD_MAX_WIDTH = 1366,
LCD_MAX_HEIGHT = 768,
- LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */
-};
-
-vidinfo_t panel_info = {
- /* Insert a value here so that we don't end up in the BSS */
- .vl_col = -1,
+ LCD_MAX_LOG2_BPP = VIDEO_BPP16,
};
static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win)
@@ -141,26 +131,26 @@
writel(val, &dc->cmd.state_ctrl);
}
-static void write_pair(struct tegra_lcd_priv *config, int item, u32 *reg)
+static void write_pair(struct tegra_lcd_priv *priv, int item, u32 *reg)
{
- writel(config->horiz_timing[item] |
- (config->vert_timing[item] << 16), reg);
+ writel(priv->horiz_timing[item] |
+ (priv->vert_timing[item] << 16), reg);
}
static int update_display_mode(struct dc_disp_reg *disp,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
unsigned long val;
unsigned long rate;
unsigned long div;
writel(0x0, &disp->disp_timing_opt);
- write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync);
- write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width);
- write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch);
- write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch);
+ write_pair(priv, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync);
+ write_pair(priv, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width);
+ write_pair(priv, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch);
+ write_pair(priv, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch);
- writel(config->width | (config->height << 16), &disp->disp_active);
+ writel(priv->width | (priv->height << 16), &disp->disp_active);
val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT;
val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT;
@@ -178,7 +168,7 @@
* up or down as requried.
*/
rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL);
- div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2;
+ div = ((rate * 2 + priv->pixel_clock / 2) / priv->pixel_clock) - 2;
debug("Display clock %lu, divider %lu\n", rate, div);
writel(0x00010001, &disp->shift_clk_opt);
@@ -264,20 +254,20 @@
}
static int setup_window(struct disp_ctl_win *win,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
win->x = 0;
win->y = 0;
- win->w = config->width;
- win->h = config->height;
+ win->w = priv->width;
+ win->h = priv->height;
win->out_x = 0;
win->out_y = 0;
- win->out_w = config->width;
- win->out_h = config->height;
- win->phys_addr = config->frame_buffer;
- win->stride = config->width * (1 << config->log2_bpp) / 8;
- debug("%s: depth = %d\n", __func__, config->log2_bpp);
- switch (config->log2_bpp) {
+ win->out_w = priv->width;
+ win->out_h = priv->height;
+ win->phys_addr = priv->frame_buffer;
+ win->stride = priv->width * (1 << priv->log2_bpp) / 8;
+ debug("%s: depth = %d\n", __func__, priv->log2_bpp);
+ switch (priv->log2_bpp) {
case 5:
case 24:
win->fmt = COLOR_DEPTH_R8G8B8A8;
@@ -296,17 +286,6 @@
return 0;
}
-/**
- * Return the current display configuration
- *
- * @return pointer to display configuration, or NULL if there is no valid
- * config
- */
-struct tegra_lcd_priv *tegra_display_get_config(void)
-{
- return config.valid ? &config : NULL;
-}
-
static void debug_timing(const char *name, unsigned int timing[])
{
#ifdef DEBUG
@@ -324,19 +303,18 @@
*
* @param blob fdt blob
* @param node offset of fdt node to read from
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt config into
* @return 0 if ok, -ve on error
*/
static int tegra_decode_panel(const void *blob, int node,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
int front, back, ref;
- config->width = fdtdec_get_int(blob, node, "xres", -1);
- config->height = fdtdec_get_int(blob, node, "yres", -1);
- config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
- if (!config->pixel_clock || config->width == -1 ||
- config->height == -1) {
+ priv->width = fdtdec_get_int(blob, node, "xres", -1);
+ priv->height = fdtdec_get_int(blob, node, "yres", -1);
+ priv->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
+ if (!priv->pixel_clock || priv->width == -1 || priv->height == -1) {
debug("%s: Pixel parameters missing\n", __func__);
return -FDT_ERR_NOTFOUND;
}
@@ -350,12 +328,12 @@
}
/* Use a ref-to-sync of 1 always, and take this from the front porch */
- config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("horiz", config->horiz_timing);
+ priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ priv->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ priv->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ priv->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("horiz", priv->horiz_timing);
back = fdtdec_get_int(blob, node, "upper-margin", -1);
front = fdtdec_get_int(blob, node, "lower-margin", -1);
@@ -365,12 +343,12 @@
return -FDT_ERR_NOTFOUND;
}
- config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("vert", config->vert_timing);
+ priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ priv->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ priv->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ priv->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("vert", priv->vert_timing);
return 0;
}
@@ -379,55 +357,46 @@
* Decode the display controller information from the fdt.
*
* @param blob fdt blob
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt priv into
* @return 0 if ok, -ve on error
*/
-static int tegra_display_decode_config(const void *blob,
- struct tegra_lcd_priv *config)
+static int tegra_display_decode_config(const void *blob, int node,
+ struct tegra_lcd_priv *priv)
{
- int node, rgb;
+ int rgb;
int bpp, bit;
- /* TODO: Support multiple controllers */
- node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC);
- if (node < 0) {
- debug("%s: Cannot find display controller node in fdt\n",
- __func__);
- return node;
- }
- config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
- if (!config->disp) {
+ priv->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ if (!priv->disp) {
debug("%s: No display controller address\n", __func__);
return -1;
}
rgb = fdt_subnode_offset(blob, node, "rgb");
- config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
- if (config->panel_node < 0) {
+ priv->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
+ if (priv->panel_node < 0) {
debug("%s: Cannot find panel information\n", __func__);
return -1;
}
- if (tegra_decode_panel(blob, config->panel_node, config)) {
+ if (tegra_decode_panel(blob, priv->panel_node, priv)) {
debug("%s: Failed to decode panel information\n", __func__);
return -1;
}
- bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel",
+ bpp = fdtdec_get_int(blob, priv->panel_node, "nvidia,bits-per-pixel",
-1);
bit = ffs(bpp) - 1;
if (bpp == (1 << bit))
- config->log2_bpp = bit;
+ priv->log2_bpp = bit;
else
- config->log2_bpp = bpp;
+ priv->log2_bpp = bpp;
if (bpp == -1) {
debug("%s: Pixel bpp parameters missing\n", __func__);
return -FDT_ERR_NOTFOUND;
}
- config->bpp = bpp;
-
- config->valid = 1; /* we have a valid configuration */
+ priv->bpp = bpp;
return 0;
}
@@ -440,20 +409,19 @@
* struct tegra_lcd_priv to see what was actually chosen.
*
* @param blob Device tree blob
+ * @param priv Driver's private data
* @param default_lcd_base Default address of LCD frame buffer
* @return 0 if ok, -1 on error (unsupported bits per pixel)
*/
-static int tegra_display_probe(const void *blob, void *default_lcd_base)
+static int tegra_display_probe(const void *blob, struct tegra_lcd_priv *priv,
+ void *default_lcd_base)
{
struct disp_ctl_win window;
struct dc_ctlr *dc;
- if (tegra_display_decode_config(blob, &config))
- return -1;
+ priv->frame_buffer = (u32)default_lcd_base;
- config.frame_buffer = (u32)default_lcd_base;
-
- dc = (struct dc_ctlr *)config.disp;
+ dc = (struct dc_ctlr *)priv->disp;
/*
* A header file for clock constants was NAKed upstream.
@@ -468,10 +436,10 @@
basic_init_timer(&dc->disp);
rgb_enable(&dc->com);
- if (config.pixel_clock)
- update_display_mode(&dc->disp, &config);
+ if (priv->pixel_clock)
+ update_display_mode(&dc->disp, priv);
- if (setup_window(&window, &config))
+ if (setup_window(&window, priv))
return -1;
update_window(dc, &window);
@@ -479,142 +447,61 @@
return 0;
}
-static void update_panel_size(struct tegra_lcd_priv *config)
-{
- panel_info.vl_col = config->width;
- panel_info.vl_row = config->height;
- panel_info.vl_bpix = config->log2_bpp;
-}
-
-/*
- * Main init function called by lcd driver.
- * Inits and then prints test pattern if required.
- */
-
-void lcd_ctrl_init(void *lcdbase)
-{
- int type = DCACHE_OFF;
- int size;
-
- assert(disp_config);
-
- /* Make sure that we can acommodate the selected LCD */
- assert(disp_config->width <= LCD_MAX_WIDTH);
- assert(disp_config->height <= LCD_MAX_HEIGHT);
- assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP);
- if (disp_config->width <= LCD_MAX_WIDTH
- && disp_config->height <= LCD_MAX_HEIGHT
- && disp_config->log2_bpp <= LCD_MAX_LOG2_BPP)
- update_panel_size(disp_config);
- size = lcd_get_size(&lcd_line_length);
-
- /* Set up the LCD caching as requested */
- if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
- type = DCACHE_WRITETHROUGH;
- else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK)
- type = DCACHE_WRITEBACK;
- mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type);
-
- /* Enable flushing after LCD writes if requested */
- lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH);
-
- debug("LCD frame buffer at %pa\n", &disp_config->frame_buffer);
-}
-
-ulong calc_fbsize(void)
-{
- return (panel_info.vl_col * panel_info.vl_row *
- NBITS(panel_info.vl_bpix)) / 8;
-}
-
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
-{
-}
-
-void tegra_lcd_early_init(const void *blob)
-{
- /*
- * Go with the maximum size for now. We will fix this up after
- * relocation. These values are only used for memory alocation.
- */
- panel_info.vl_col = LCD_MAX_WIDTH;
- panel_info.vl_row = LCD_MAX_HEIGHT;
- panel_info.vl_bpix = LCD_MAX_LOG2_BPP;
-}
-
/**
* Decode the panel information from the fdt.
*
* @param blob fdt blob
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt config into
* @return 0 if ok, -ve on error
*/
-static int fdt_decode_lcd(const void *blob, struct tegra_lcd_priv *config)
+static int fdt_decode_lcd(const void *blob, struct tegra_lcd_priv *priv)
{
int display_node;
- disp_config = tegra_display_get_config();
- if (!disp_config) {
- debug("%s: Display controller is not configured\n", __func__);
- return -1;
- }
- display_node = disp_config->panel_node;
+ display_node = priv->panel_node;
if (display_node < 0) {
debug("%s: No panel configuration available\n", __func__);
return -1;
}
- config->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
- if (config->pwm_channel < 0) {
+ priv->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
+ if (priv->pwm_channel < 0) {
debug("%s: Unable to request PWM channel\n", __func__);
return -1;
}
- config->cache_type = fdtdec_get_int(blob, display_node,
+ priv->cache_type = fdtdec_get_int(blob, display_node,
"nvidia,cache-type",
FDT_LCD_CACHE_WRITE_BACK_FLUSH);
/* These GPIOs are all optional */
gpio_request_by_name_nodev(blob, display_node,
"nvidia,backlight-enable-gpios", 0,
- &config->backlight_en, GPIOD_IS_OUT);
+ &priv->backlight_en, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,lvds-shutdown-gpios", 0,
- &config->lvds_shutdown, GPIOD_IS_OUT);
+ &priv->lvds_shutdown, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,backlight-vdd-gpios", 0,
- &config->backlight_vdd, GPIOD_IS_OUT);
+ &priv->backlight_vdd, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,panel-vdd-gpios", 0,
- &config->panel_vdd, GPIOD_IS_OUT);
+ &priv->panel_vdd, GPIOD_IS_OUT);
return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings",
- config->panel_timings, FDT_LCD_TIMINGS);
+ priv->panel_timings, FDT_LCD_TIMINGS);
}
/**
* Handle the next stage of device init
*/
-static int handle_stage(const void *blob)
+static int handle_stage(const void *blob, struct tegra_lcd_priv *priv)
{
debug("%s: stage %d\n", __func__, stage);
/* do the things for this stage */
switch (stage) {
case STAGE_START:
- /* Initialize the Tegra display controller */
- if (tegra_display_probe(gd->fdt_blob, (void *)gd->fb_base)) {
- printf("%s: Failed to probe display driver\n",
- __func__);
- return -1;
- }
-
- /* get panel details */
- if (fdt_decode_lcd(blob, &config)) {
- printf("No valid LCD information in device tree\n");
- return -1;
- }
-
/*
* It is possible that the FDT has requested that the LCD be
* disabled. We currently don't support this. It would require
@@ -628,27 +515,27 @@
funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT);
break;
case STAGE_PANEL_VDD:
- if (dm_gpio_is_valid(&config.panel_vdd))
- dm_gpio_set_value(&config.panel_vdd, 1);
+ if (dm_gpio_is_valid(&priv->panel_vdd))
+ dm_gpio_set_value(&priv->panel_vdd, 1);
break;
case STAGE_LVDS:
- if (dm_gpio_is_valid(&config.lvds_shutdown))
- dm_gpio_set_value(&config.lvds_shutdown, 1);
+ if (dm_gpio_is_valid(&priv->lvds_shutdown))
+ dm_gpio_set_value(&priv->lvds_shutdown, 1);
break;
case STAGE_BACKLIGHT_VDD:
- if (dm_gpio_is_valid(&config.backlight_vdd))
- dm_gpio_set_value(&config.backlight_vdd, 1);
+ if (dm_gpio_is_valid(&priv->backlight_vdd))
+ dm_gpio_set_value(&priv->backlight_vdd, 1);
break;
case STAGE_PWM:
/* Enable PWM at 15/16 high, 32768 Hz with divider 1 */
pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM);
pinmux_tristate_disable(PMUX_PINGRP_GPU);
- pwm_enable(config.pwm_channel, 32768, 0xdf, 1);
+ pwm_enable(priv->pwm_channel, 32768, 0xdf, 1);
break;
case STAGE_BACKLIGHT_EN:
- if (dm_gpio_is_valid(&config.backlight_en))
- dm_gpio_set_value(&config.backlight_en, 1);
+ if (dm_gpio_is_valid(&priv->backlight_en))
+ dm_gpio_set_value(&priv->backlight_en, 1);
break;
case STAGE_DONE:
break;
@@ -657,14 +544,32 @@
/* set up timer for next stage */
timer_next = timer_get_us();
if (stage < FDT_LCD_TIMINGS)
- timer_next += config.panel_timings[stage] * 1000;
+ timer_next += priv->panel_timings[stage] * 1000;
/* move to next stage */
stage++;
return 0;
}
-int tegra_lcd_check_next_stage(const void *blob, int wait)
+/**
+ * Perform the next stage of the LCD init if it is time to do so.
+ *
+ * LCD init can be time-consuming because of the number of delays we need
+ * while waiting for the backlight power supply, etc. This function can
+ * be called at various times during U-Boot operation to advance the
+ * initialization of the LCD to the next stage if sufficient time has
+ * passed since the last stage. It keeps track of what stage it is up to
+ * and the time that it is permitted to move to the next stage.
+ *
+ * The final call should have wait=1 to complete the init.
+ *
+ * @param blob fdt blob containing LCD information
+ * @param wait 1 to wait until all init is complete, and then return
+ * 0 to return immediately, potentially doing nothing if it is
+ * not yet time for the next init.
+ */
+static int tegra_lcd_check_next_stage(const void *blob,
+ struct tegra_lcd_priv *priv, int wait)
{
if (stage == STAGE_DONE)
return 0;
@@ -683,7 +588,7 @@
}
}
- if (handle_stage(blob))
+ if (handle_stage(blob, priv))
return -1;
} while (wait && stage != STAGE_DONE);
if (stage == STAGE_DONE)
@@ -692,20 +597,74 @@
return 0;
}
-void lcd_enable(void)
+static int tegra_lcd_probe(struct udevice *dev)
{
- /*
- * Backlight and power init will be done separately in
- * tegra_lcd_check_next_stage(), which should be called in
- * board_late_init().
- *
- * U-Boot code supports only colour depth, selected at compile time.
- * The device tree setting should match this. Otherwise the display
- * will not look right, and U-Boot may crash.
- */
- if (disp_config->log2_bpp != LCD_BPP) {
- printf("%s: Error: LCD depth configured in FDT (%d = %dbpp)"
- " must match setting of LCD_BPP (%d)\n", __func__,
- disp_config->log2_bpp, disp_config->bpp, LCD_BPP);
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct tegra_lcd_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int type = DCACHE_OFF;
+
+ if (tegra_display_decode_config(blob, dev->of_offset, priv))
+ return -1;
+
+ /* get panel details */
+ if (fdt_decode_lcd(blob, priv)) {
+ printf("No valid LCD information in device tree\n");
+ return -1;
}
+
+ /* Initialize the Tegra display controller */
+ if (tegra_display_probe(blob, priv, (void *)plat->base)) {
+ printf("%s: Failed to probe display driver\n", __func__);
+ return -1;
+ }
+
+ tegra_lcd_check_next_stage(blob, priv, 1);
+
+ /* Set up the LCD caching as requested */
+ if (priv->cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
+ type = DCACHE_WRITETHROUGH;
+ else if (priv->cache_type & FDT_LCD_CACHE_WRITE_BACK)
+ type = DCACHE_WRITEBACK;
+ mmu_set_region_dcache_behaviour(priv->frame_buffer, plat->size, type);
+
+ /* Enable flushing after LCD writes if requested */
+ video_set_flush_dcache(dev, priv->cache_type & FDT_LCD_CACHE_FLUSH);
+
+ uc_priv->xsize = priv->width;
+ uc_priv->ysize = priv->height;
+ uc_priv->bpix = priv->log2_bpp;
+ debug("LCD frame buffer at %pa, size %x\n", &priv->frame_buffer,
+ plat->size);
+
+ return 0;
}
+
+static int tegra_lcd_bind(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+
+ plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+ (1 << LCD_MAX_LOG2_BPP) / 8;
+
+ return 0;
+}
+
+static const struct video_ops tegra_lcd_ops = {
+};
+
+static const struct udevice_id tegra_lcd_ids[] = {
+ { .compatible = "nvidia,tegra20-dc" },
+ { }
+};
+
+U_BOOT_DRIVER(tegra_lcd) = {
+ .name = "tegra_lcd",
+ .id = UCLASS_VIDEO,
+ .of_match = tegra_lcd_ids,
+ .ops = &tegra_lcd_ops,
+ .bind = tegra_lcd_bind,
+ .probe = tegra_lcd_probe,
+ .priv_auto_alloc_size = sizeof(struct tegra_lcd_priv),
+};