armv8: lx2162aqds: Add support for LX2162AQDS platform
This patch add base support for LX2162AQDS board.
LX2162AQDS board supports LX2162A family SoCs.
This patch add basic support of platform.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: hui.song <hui.song_1@nxp.com>
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/board/freescale/lx2160a/README b/board/freescale/lx2160a/README
index 62fb9ea..7bca98d 100644
--- a/board/freescale/lx2160a/README
+++ b/board/freescale/lx2160a/README
@@ -195,3 +195,135 @@
|Connect I/O cable to IO_SLOT6(J125)
-------------------------------------------------------------------------
+LX2162A SoC Overview
+--------------------------------------
+For details, please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+
+LX2162AQDS board Overview
+----------------------
+DDR Memory
+ One ports of 72-bits (8-bits ECC) DDR4.
+ Each port supports four chip-selects and two DIMM
+ connectors. Data rate upto 2.9 GT/s.
+
+SERDES ports
+ Two serdes controllers (12 lanes)
+ Serdes1: Supports two USXGMII connectors, each connected through
+ Aquantia AQR107 phy, two 25GbE SFP+ modules connected through an Inphi
+ IN112525 phy and one 40 GbE QSFP+ module connected through an Inphi
+ CS4223 phy.
+
+ Serdes2: Supports two PCIe x4 (Gen3) and one PCIe x8 (Gen3) connector,
+ four SATA 3.0 connectors
+
+eSDHC
+ eSDHC1: Supports a SD connector for connecting SD cards
+ eSDHC2: Supports 128GB Micron MTFC128GAJAECE-IT eMMC
+
+Octal SPI (XSPI)
+ Supports two 64 MB onbpard octal SPI flash memories, one SPI emulator
+ for off-board emulation
+
+I2C All system devices on I2C1 multiplexed using PCA9547 multiplexer
+ Serial Ports
+
+USB 3.0
+ One high speed USB 3.0 ports. First USB 3.0 port configured as Host
+ with Type-A connector, second USB 3.0 port configured as OTG with
+ micro-AB connector
+
+Serial Ports Two UART ports
+Ethernet Two RGMII interfaces
+Debug ARM JTAG support
+
+Booting Options
+---------------
+a) Flexspi boot
+b) SD boot
+c) eMMC boot
+
+Memory map for Flexspi flash
+----------------------------
+Image Flash Offset
+bl2_flexspi_nor.pbl (RCW+PBI+bl2.pbl) 0x00000000
+fip.bin (bl31 + bl33(u-boot) +
+ header for Secure-boot(secure-boot only)) 0x00100000
+Boot firmware Environment 0x00500000
+DDR PHY Firmware (fip_ddr_all.bin) 0x00800000
+DPAA2 MC Firmware 0x00A00000
+DPAA2 DPL 0x00D00000
+DPAA2 DPC 0x00E00000
+Kernel.itb 0x01000000
+
+Memory map for sd/eMMC card
+----------------------------
+Image SD/eMMC card Offset
+bl2_sd.pbl (RCW+PBI+bl2.pbl) 0x00008
+fip.bin (bl31 + bl33(u-boot) +
+ header for Secure-boot(secure-boot only)) 0x00800
+Boot firmware Environment 0x02800
+DDR PHY Firmware (fip_ddr_all.bin) 0x04000
+DPAA2 MC Firmware 0x05000
+DPAA2 DPL 0x06800
+DPAA2 DPC 0x07000
+Kernel.itb 0x08000
+
+Various Mezzanine cards and their connection for different SERDES protocols is
+as below:
+
+SERDES1 |CARDS
+-----------------------------------------------------------------------
+1 |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+------------------------------------------------------------------------
+3 |Mezzanine:X-M11-USXGMII (29828)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+------------------------------------------------------------------------
+15 |Mezzanine:X-M8-50G (29734)
+ |Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+------------------------------------------------------------------------
+17 |Mezzanine:X-M13-25G (32133)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+------------------------------------------------------------------------
+18 |Mezzanine:X-M11-USXGMII (29828), X-M13-25G (32133)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
+ |Connect M11 I/O cable to IO_SLOT1(J110), M13 I/O cable to IO_SLOT6(J125)
+------------------------------------------------------------------------
+20 |Mezzanine:X-M7-40G (29738)
+ |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J108)
+------------------------------------------------------------------------
+
+
+SERDES2 |CARDS
+-----------------------------------------------------------------------
+2 |Mezzanine:X-M6-PCIE-X8 (29737) *
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
+ |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT4 (J117)
+ |Connect I/O cable to IO_SLOT3(J116)
+------------------------------------------------------------------------
+3 |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
+ |Connect I/O cable to IO_SLOT3(J116)
+ |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
+ |Connect I/O cable to IO_SLOT4(J119)
+------------------------------------------------------------------------
+5 |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
+ |Connect I/O cable to IO_SLOT3(J116)
+ |Mezzanine:X-M5-SATA (29687)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
+ |Connect I/O cable to IO_SLOT4(J119)
+------------------------------------------------------------------------
+11 |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
+ |Connect I/O cable to IO_SLOT7(J127)
+ |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
+ |Connect I/O cable to IO_SLOT8(J131)
+------------------------------------------------------------------------