powerpc/mpc85xx:Put errata number for T104x NAND boot issue
When device is configured to load RCW from NAND flash IFC_A[16:31] are driven
low after RCW loading. Hence Devices connected on IFC_CS[1:7] and using
IFC_A[16:31] lines are not accessible.
Workaround is already in-place.
Put the errata number to adhere errata handling framework.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/README b/README
index 66770b6..0c892d8 100644
--- a/README
+++ b/README
@@ -409,6 +409,10 @@
Enables a workaround for IFC erratum A003399. It is only
requred during NOR boot.
+ CONFIG_A008044_WORKAROUND
+ Enables a workaround for T1040/T1042 erratum A008044. It is only
+ requred during NAND boot and valid for Rev 1.0 SoC revision
+
CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
This is the value to write into CCSR offset 0x18600