arm: Rename STM32MP15x
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9542303..7bb60c3 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1364,7 +1364,7 @@
dtb-$(CONFIG_STM32MP13X) += \
stm32mp135f-dk.dtb
-dtb-$(CONFIG_STM32MP15x) += \
+dtb-$(CONFIG_STM32MP15X) += \
stm32mp157a-dk1.dtb \
stm32mp157a-dk1-scmi.dtb \
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi
index 573dd4d..fe56f05 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -206,7 +206,7 @@
resets = <&rcc UART8_R>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE)
&binman {
u-boot-stm32 {
filename = "u-boot.stm32";
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index 2623ceb..a163582 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -22,13 +22,13 @@
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
config {
u-boot,mmc-env-partition = "ssbl";
};
#endif
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index b828827..ef91088 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -20,13 +20,13 @@
st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
config {
u-boot,mmc-env-partition = "ssbl";
};
#endif
-#ifdef CONFIG_STM32MP15x_STM32IMAGE
+#ifdef CONFIG_STM32MP15X_STM32IMAGE
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
index eb283ca..139940b 100644
--- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
@@ -28,7 +28,7 @@
#address-cells = <1>;
#size-cells = <1>;
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
partition@0 {
label = "fsbl1";
reg = <0x00000000 0x00040000>;
@@ -82,7 +82,7 @@
#address-cells = <1>;
#size-cells = <1>;
-#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL)
+#if defined(CONFIG_STM32MP15X_STM32IMAGE) || defined(CONFIG_SPL)
partition@0 {
label = "fsbl";
reg = <0x00000000 0x00200000>;
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 241fcf3..a1763ff 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -35,7 +35,7 @@
choice
prompt "Select STMicroelectronics STM32MPxxx Soc"
- default STM32MP15x
+ default STM32MP15X
config STM32MP13X
bool "Support STMicroelectronics STM32MP13x Soc"
@@ -55,7 +55,7 @@
support of STMicroelectronics SOC STM32MP13x family
STMicroelectronics MPU with core ARMv7
-config STM32MP15x
+config STM32MP15X
bool "Support STMicroelectronics STM32MP15x Soc"
select ARCH_SUPPORT_PSCI
select BINMAN
@@ -127,7 +127,7 @@
config STM32_ETZPC
bool "STM32 Extended TrustZone Protection"
- depends on STM32MP15x || STM32MP13X
+ depends on STM32MP15X || STM32MP13X
default y
imply BOOTP_SERVERIP
help
diff --git a/arch/arm/mach-stm32mp/Kconfig.15x b/arch/arm/mach-stm32mp/Kconfig.15x
index 1d32f8b..71c14eb 100644
--- a/arch/arm/mach-stm32mp/Kconfig.15x
+++ b/arch/arm/mach-stm32mp/Kconfig.15x
@@ -1,6 +1,6 @@
-if STM32MP15x
+if STM32MP15X
-config STM32MP15x_STM32IMAGE
+config STM32MP15X_STM32IMAGE
bool "Support STM32 image for generated U-Boot image"
depends on TFABOOT
help
@@ -11,7 +11,7 @@
prompt "STM32MP15x board select"
optional
-config TARGET_ST_STM32MP15x
+config TARGET_ST_STM32MP15X
bool "STMicroelectronics STM32MP15x boards"
imply BOOTSTAGE
imply CMD_BOOTSTAGE
diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index 3d194de..ee8a542 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -8,7 +8,7 @@
obj-y += bsec.o
obj-y += soc.o
-obj-$(CONFIG_STM32MP15x) += stm32mp1/
+obj-$(CONFIG_STM32MP15X) += stm32mp1/
obj-$(CONFIG_STM32MP13X) += stm32mp1/
obj-$(CONFIG_STM32MP25X) += stm32mp2/
diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c b/arch/arm/mach-stm32mp/cmd_stm32key.c
index dcef6ac..c7fe232 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32key.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32key.c
@@ -20,7 +20,7 @@
*/
#define STM32_OTP_CLOSE_ID 0
#define STM32_OTP_STM32MP13X_CLOSE_MASK 0x3F
-#define STM32_OTP_STM32MP15x_CLOSE_MASK BIT(6)
+#define STM32_OTP_STM32MP15X_CLOSE_MASK BIT(6)
/* PKH is the first element of the key list */
#define STM32KEY_PKH 0
@@ -64,7 +64,7 @@
if (IS_ENABLED(CONFIG_STM32MP13X))
return ARRAY_SIZE(stm32mp13_list);
- if (IS_ENABLED(CONFIG_STM32MP15x))
+ if (IS_ENABLED(CONFIG_STM32MP15X))
return ARRAY_SIZE(stm32mp15_list);
}
@@ -73,7 +73,7 @@
if (IS_ENABLED(CONFIG_STM32MP13X))
return &stm32mp13_list[index];
- if (IS_ENABLED(CONFIG_STM32MP15x))
+ if (IS_ENABLED(CONFIG_STM32MP15X))
return &stm32mp15_list[index];
}
@@ -82,8 +82,8 @@
if (IS_ENABLED(CONFIG_STM32MP13X))
return STM32_OTP_STM32MP13X_CLOSE_MASK;
- if (IS_ENABLED(CONFIG_STM32MP15x))
- return STM32_OTP_STM32MP15x_CLOSE_MASK;
+ if (IS_ENABLED(CONFIG_STM32MP15X))
+ return STM32_OTP_STM32MP15X_CLOSE_MASK;
}
static int get_misc_dev(struct udevice **dev)
diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
index 934ffb1..bf184c8 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
@@ -23,14 +23,14 @@
#define CMD_SIZE 512
/* SMC is only supported in SPMIN for STM32MP15x */
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define OTP_SIZE_SMC 1024
#else
#define OTP_SIZE_SMC 0
#endif
/* size of the OTP struct in NVMEM PTA */
#define _OTP_SIZE_TA(otp) (((otp) * 2 + 2) * 4)
-#if defined(CONFIG_STM32MP13X) || defined(CONFIG_STM32MP15x)
+#if defined(CONFIG_STM32MP13X) || defined(CONFIG_STM32MP15X)
/* STM32MP1 with BSEC2 */
#define OTP_SIZE_TA _OTP_SIZE_TA(96)
#else
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 2d7d973..f598da9 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -71,11 +71,11 @@
* only address used before device tree parsing
*/
-#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13X)
+#if defined(CONFIG_STM32MP15X) || defined(CONFIG_STM32MP13X)
#define STM32_RCC_BASE 0x50000000
#define STM32_PWR_BASE 0x50001000
#define STM32_SYSCFG_BASE 0x50020000
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define STM32_DBGMCU_BASE 0x50081000
#endif
#define STM32_FMC2_BASE 0x58002000
@@ -88,7 +88,7 @@
#define STM32_STGEN_BASE 0x5C008000
#define STM32_TAMP_BASE 0x5C00A000
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define STM32_USART1_BASE 0x5C000000
#define STM32_USART2_BASE 0x4000E000
#endif
@@ -107,7 +107,7 @@
#define STM32_SDMMC2_BASE 0x58007000
#define STM32_SDMMC3_BASE 0x48004000
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define STM32_SYSRAM_BASE 0x2FFC0000
#define STM32_SYSRAM_SIZE SZ_256K
#endif
@@ -129,7 +129,7 @@
/* TAMP registers */
#define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x)
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define TAMP_BACKUP_MAGIC_NUMBER TAMP_BACKUP_REGISTER(4)
#define TAMP_BACKUP_BRANCH_ADDRESS TAMP_BACKUP_REGISTER(5)
#define TAMP_FWU_BOOT_INFO_REG TAMP_BACKUP_REGISTER(10)
@@ -181,7 +181,7 @@
#define STM32_BSEC_LOCK(id) (STM32_BSEC_LOCK_OFFSET + (id) * 4)
/* BSEC OTP index */
-#ifdef CONFIG_STM32MP15x
+#ifdef CONFIG_STM32MP15X
#define BSEC_OTP_RPN 1
#define BSEC_OTP_SERIAL 13
#define BSEC_OTP_PKG 16
diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile
index e74342d..8571487 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/Makefile
+++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile
@@ -6,7 +6,7 @@
obj-y += cpu.o
obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
-obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
+obj-$(CONFIG_STM32MP15X) += stm32mp15x.o
obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
ifdef CONFIG_SPL_BUILD
diff --git a/arch/arm/mach-stm32mp/stm32mp1/fdt.c b/arch/arm/mach-stm32mp/stm32mp1/fdt.c
index 9436b87..d0b6c3c 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/fdt.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/fdt.c
@@ -275,7 +275,7 @@
array_size = ARRAY_SIZE(stm32mp13_ip_addr);
}
- if (IS_ENABLED(CONFIG_STM32MP15x)) {
+ if (IS_ENABLED(CONFIG_STM32MP15X)) {
array = stm32mp15_ip_addr;
array_size = ARRAY_SIZE(stm32mp15_ip_addr);
}
@@ -494,7 +494,7 @@
if (IS_ENABLED(CONFIG_STM32MP13X))
stm32mp13_fdt_fixup(blob, soc, cpu, name);
- if (IS_ENABLED(CONFIG_STM32MP15x)) {
+ if (IS_ENABLED(CONFIG_STM32MP15X)) {
stm32mp15_fdt_fixup(blob, soc, cpu, name);
/*
@@ -505,7 +505,7 @@
* under CONFIG_STM32MP15x_STM32IMAGE only for compatibility
* when FIP is not used by TF-A
*/
- if (IS_ENABLED(CONFIG_STM32MP15x_STM32IMAGE) &&
+ if (IS_ENABLED(CONFIG_STM32MP15X_STM32IMAGE) &&
!tee_find_device(NULL, NULL, NULL, NULL))
stm32_fdt_disable_optee(blob);
}