| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) Siemens AG, 2018-2021 |
| * |
| * Authors: |
| * Le Jin <le.jin@siemens.com> |
| * Jan Kiszka <jan.kiszka@siemens.com> |
| * |
| * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 |
| */ |
| |
| #include "k3-am654.dtsi" |
| #include <dt-bindings/phy/phy.h> |
| |
| / { |
| aliases { |
| serial0 = &wkup_uart0; |
| serial1 = &mcu_uart0; |
| serial2 = &main_uart0; |
| serial3 = &main_uart1; |
| i2c0 = &wkup_i2c0; |
| i2c1 = &mcu_i2c0; |
| i2c2 = &main_i2c0; |
| i2c3 = &main_i2c1; |
| i2c4 = &main_i2c2; |
| i2c5 = &main_i2c3; |
| spi0 = &mcu_spi0; |
| mmc0 = &sdhci1; |
| mmc1 = &sdhci0; |
| }; |
| |
| chosen { |
| stdout-path = "serial3:115200n8"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| secure_ddr: secure-ddr@9e800000 { |
| reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ |
| alignment = <0x1000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0xa0000000 0 0x100000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0xa0100000 0 0xf00000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0xa1000000 0 0x100000>; |
| no-map; |
| }; |
| |
| mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0xa1100000 0 0xf00000>; |
| no-map; |
| }; |
| |
| rtos_ipc_memory_region: ipc-memories@a2000000 { |
| reg = <0x00 0xa2000000 0x00 0x00200000>; |
| alignment = <0x1000>; |
| no-map; |
| }; |
| |
| /* To reserve the power-on(PON) reason for watchdog reset */ |
| wdt_reset_memory_region: wdt-memory@a2200000 { |
| reg = <0x00 0xa2200000 0x00 0x00001000>; |
| no-map; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&leds_pins_default>; |
| |
| status-led-red { |
| gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>; |
| panic-indicator; |
| }; |
| |
| status-led-green { |
| gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| user-led1-red { |
| gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| user-led1-green { |
| gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| user-led2-red { |
| gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| user-led2-green { |
| gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| dp_refclk: clock { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| }; |
| |
| &wkup_pmx0 { |
| wkup_i2c0_pins_default: wkup-i2c0-default-pins { |
| pinctrl-single,pins = < |
| /* (AC7) WKUP_I2C0_SCL */ |
| AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) |
| /* (AD6) WKUP_I2C0_SDA */ |
| AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) |
| >; |
| }; |
| |
| mcu_i2c0_pins_default: mcu-i2c0-default-pins { |
| pinctrl-single,pins = < |
| /* (AD8) MCU_I2C0_SCL */ |
| AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) |
| /* (AD7) MCU_I2C0_SDA */ |
| AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) |
| >; |
| }; |
| |
| arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins { |
| pinctrl-single,pins = < |
| /* (R2) WKUP_GPIO0_21 */ |
| AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7) |
| >; |
| }; |
| |
| push_button_pins_default: push-button-default-pins { |
| pinctrl-single,pins = < |
| /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ |
| AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) |
| >; |
| }; |
| |
| arduino_uart_pins_default: arduino-uart-default-pins { |
| pinctrl-single,pins = < |
| /* (P4) MCU_UART0_RXD */ |
| AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) |
| /* (P5) MCU_UART0_TXD */ |
| AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) |
| >; |
| }; |
| |
| arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins { |
| pinctrl-single,pins = < |
| /* (P1) WKUP_GPIO0_31 */ |
| AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7) |
| /* (N3) WKUP_GPIO0_33 */ |
| AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7) |
| >; |
| }; |
| |
| arduino_io_oe_pins_default: arduino-io-oe-default-pins { |
| pinctrl-single,pins = < |
| /* (N4) WKUP_GPIO0_34 */ |
| AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7) |
| /* (M2) WKUP_GPIO0_36 */ |
| AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7) |
| /* (M3) WKUP_GPIO0_37 */ |
| AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7) |
| /* (M4) WKUP_GPIO0_38 */ |
| AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7) |
| /* (M1) WKUP_GPIO0_41 */ |
| AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7) |
| >; |
| }; |
| |
| mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { |
| pinctrl-single,pins = < |
| /* (V1) MCU_OSPI0_CLK */ |
| AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) |
| /* (U2) MCU_OSPI0_DQS */ |
| AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) |
| /* (U4) MCU_OSPI0_D0 */ |
| AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) |
| /* (U5) MCU_OSPI0_D1 */ |
| AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) |
| /* (R4) MCU_OSPI0_CSn0 */ |
| AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) |
| >; |
| }; |
| |
| db9_com_mode_pins_default: db9-com-mode-default-pins { |
| pinctrl-single,pins = < |
| /* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */ |
| AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7) |
| /* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */ |
| AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7) |
| /* (AC1) WKUP_GPIO0_7, used as uart0 term */ |
| AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7) |
| /* (AC2) WKUP_GPIO0_6, used as uart0 en */ |
| AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7) |
| >; |
| }; |
| |
| leds_pins_default: leds-default-pins { |
| pinctrl-single,pins = < |
| /* (T2) WKUP_GPIO0_17, used as user led1 red */ |
| AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7) |
| /* (R3) WKUP_GPIO0_22, used as user led1 green */ |
| AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7) |
| /* (R5) WKUP_GPIO0_24, used as status led red */ |
| AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7) |
| /* (N2) WKUP_GPIO0_32, used as status led green */ |
| AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7) |
| >; |
| }; |
| |
| mcu_spi0_pins_default: mcu-spi0-default-pins { |
| pinctrl-single,pins = < |
| /* (Y1) MCU_SPI0_CLK */ |
| AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) |
| /* (Y3) MCU_SPI0_D0 */ |
| AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) |
| /* (Y2) MCU_SPI0_D1 */ |
| AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) |
| /* (Y4) MCU_SPI0_CS0 */ |
| AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) |
| >; |
| }; |
| |
| minipcie_pins_default: minipcie-default-pins { |
| pinctrl-single,pins = < |
| /* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */ |
| AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7) |
| >; |
| }; |
| }; |
| |
| &main_pmx0 { |
| main_uart1_pins_default: main-uart1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ |
| AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */ |
| AM65X_IOPAD(0x0178, PIN_INPUT, 6) /* (AD22) UART1_CTSn */ |
| AM65X_IOPAD(0x017c, PIN_OUTPUT, 6) /* (AC21) UART1_RTSn */ |
| >; |
| }; |
| |
| main_i2c3_pins_default: main-i2c3-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */ |
| AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */ |
| >; |
| }; |
| |
| main_mmc1_pins_default: main-mmc1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ |
| AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ |
| AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ |
| AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ |
| AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ |
| AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ |
| AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ |
| AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP, 0) /* (C24) MMC1_SDWP */ |
| >; |
| }; |
| |
| usb0_pins_default: usb0-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ |
| >; |
| }; |
| |
| usb1_pins_default: usb1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ |
| >; |
| }; |
| |
| arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */ |
| AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */ |
| AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */ |
| AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */ |
| AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */ |
| AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */ |
| >; |
| }; |
| |
| dss_vout1_pins_default: dss-vout1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ |
| AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */ |
| AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */ |
| AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */ |
| AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */ |
| AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */ |
| AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */ |
| AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */ |
| AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */ |
| AM65X_IOPAD(0x0024, PIN_OUTPUT, 1) /* VOUT1_DATA9 */ |
| AM65X_IOPAD(0x0028, PIN_OUTPUT, 1) /* VOUT1_DATA10 */ |
| AM65X_IOPAD(0x002c, PIN_OUTPUT, 1) /* VOUT1_DATA11 */ |
| AM65X_IOPAD(0x0030, PIN_OUTPUT, 1) /* VOUT1_DATA12 */ |
| AM65X_IOPAD(0x0034, PIN_OUTPUT, 1) /* VOUT1_DATA13 */ |
| AM65X_IOPAD(0x0038, PIN_OUTPUT, 1) /* VOUT1_DATA14 */ |
| AM65X_IOPAD(0x003c, PIN_OUTPUT, 1) /* VOUT1_DATA15 */ |
| AM65X_IOPAD(0x0040, PIN_OUTPUT, 1) /* VOUT1_DATA16 */ |
| AM65X_IOPAD(0x0044, PIN_OUTPUT, 1) /* VOUT1_DATA17 */ |
| AM65X_IOPAD(0x0048, PIN_OUTPUT, 1) /* VOUT1_DATA18 */ |
| AM65X_IOPAD(0x004c, PIN_OUTPUT, 1) /* VOUT1_DATA19 */ |
| AM65X_IOPAD(0x0050, PIN_OUTPUT, 1) /* VOUT1_DATA20 */ |
| AM65X_IOPAD(0x0054, PIN_OUTPUT, 1) /* VOUT1_DATA21 */ |
| AM65X_IOPAD(0x0058, PIN_OUTPUT, 1) /* VOUT1_DATA22 */ |
| AM65X_IOPAD(0x005c, PIN_OUTPUT, 1) /* VOUT1_DATA23 */ |
| AM65X_IOPAD(0x0060, PIN_OUTPUT, 1) /* VOUT1_VSYNC */ |
| AM65X_IOPAD(0x0064, PIN_OUTPUT, 1) /* VOUT1_HSYNC */ |
| AM65X_IOPAD(0x0068, PIN_OUTPUT, 1) /* VOUT1_PCLK */ |
| AM65X_IOPAD(0x006c, PIN_OUTPUT, 1) /* VOUT1_DE */ |
| >; |
| }; |
| |
| dp_pins_default: dp-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */ |
| >; |
| }; |
| |
| main_i2c2_pins_default: main-i2c2-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */ |
| AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ |
| >; |
| }; |
| }; |
| |
| &main_pmx1 { |
| main_i2c0_pins_default: main-i2c0-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ |
| AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ |
| >; |
| }; |
| |
| main_i2c1_pins_default: main-i2c1-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ |
| AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ |
| >; |
| }; |
| |
| ecap0_pins_default: ecap0-default-pins { |
| pinctrl-single,pins = < |
| AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ |
| >; |
| }; |
| }; |
| |
| &wkup_uart0 { |
| /* Wakeup UART is used by System firmware */ |
| status = "reserved"; |
| }; |
| |
| &main_uart1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_uart1_pins_default>; |
| }; |
| |
| &mcu_uart0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&arduino_uart_pins_default>; |
| }; |
| |
| &main_gpio0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>; |
| gpio-line-names = |
| "main_gpio0-base", "", "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", "", "", |
| "", "", "", "IO4", "", "IO5", "", "", "IO6", "", |
| "", "", "", "IO7", "", "", "", "", "IO8", "", |
| "", "IO9"; |
| }; |
| |
| &wkup_gpio0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = |
| <&arduino_io_d2_to_d3_pins_default>, |
| <&arduino_i2c_aio_switch_pins_default>, |
| <&arduino_io_oe_pins_default>, |
| <&push_button_pins_default>, |
| <&db9_com_mode_pins_default>; |
| gpio-line-names = |
| /* 0..9 */ |
| "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", |
| "UART0-enable", "UART0-terminate", "", "WIFI-disable", |
| /* 10..19 */ |
| "", "", "", "", "", "", "", "", "", "", |
| /* 20..29 */ |
| "", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0", |
| /* 30..39 */ |
| "IO1", "IO2", "", "IO3", "IO17-direction", "A5", |
| "IO16-direction", "IO15-direction", "IO14-direction", "A3", |
| /* 40..49 */ |
| "", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13", |
| "IO11", |
| /* 50..51 */ |
| "IO12", "IO10"; |
| }; |
| |
| &wkup_i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wkup_i2c0_pins_default>; |
| clock-frequency = <400000>; |
| }; |
| |
| &mcu_i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcu_i2c0_pins_default>; |
| clock-frequency = <400000>; |
| |
| psu: regulator@60 { |
| compatible = "ti,tps62363"; |
| reg = <0x60>; |
| regulator-name = "tps62363-vout"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-boot-on; |
| ti,vsel0-state-high; |
| ti,vsel1-state-high; |
| ti,enable-vout-discharge; |
| }; |
| |
| /* D4200 */ |
| pcal9535_1: gpio@20 { |
| compatible = "nxp,pcal9535"; |
| reg = <0x20>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| gpio-line-names = |
| "A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull", |
| "A5-pull", "", "", |
| "IO14-enable", "IO15-enable", "IO16-enable", |
| "IO17-enable", "IO18-enable", "IO19-enable"; |
| }; |
| |
| /* D4201 */ |
| pcal9535_2: gpio@21 { |
| compatible = "nxp,pcal9535"; |
| reg = <0x21>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| gpio-line-names = |
| "IO0-direction", "IO1-direction", "IO2-direction", |
| "IO3-direction", "IO4-direction", "IO5-direction", |
| "IO6-direction", "IO7-direction", |
| "IO8-direction", "IO9-direction", "IO10-direction", |
| "IO11-direction", "IO12-direction", "IO13-direction", |
| "IO19-direction"; |
| }; |
| |
| /* D4202 */ |
| pcal9535_3: gpio@25 { |
| compatible = "nxp,pcal9535"; |
| reg = <0x25>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| gpio-line-names = |
| "IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull", |
| "IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull", |
| "IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull", |
| "IO12-pull", "IO13-pull"; |
| }; |
| }; |
| |
| &main_i2c0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c0_pins_default>; |
| clock-frequency = <400000>; |
| |
| rtc: rtc@51 { |
| compatible = "nxp,pcf8563"; |
| reg = <0x51>; |
| }; |
| |
| eeprom: eeprom@54 { |
| compatible = "atmel,24c08"; |
| reg = <0x54>; |
| pagesize = <16>; |
| }; |
| }; |
| |
| &main_i2c1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c1_pins_default>; |
| clock-frequency = <400000>; |
| }; |
| |
| &main_i2c2 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c2_pins_default>; |
| clock-frequency = <400000>; |
| }; |
| |
| &main_i2c3 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_i2c3_pins_default>; |
| clock-frequency = <400000>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| edp-bridge@f { |
| compatible = "toshiba,tc358767"; |
| reg = <0x0f>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dp_pins_default>; |
| reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; |
| |
| clock-names = "ref"; |
| clocks = <&dp_refclk>; |
| |
| toshiba,hpd-pin = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@1 { |
| reg = <1>; |
| |
| bridge_in: endpoint { |
| remote-endpoint = <&dpi_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &mcu_cpsw { |
| status = "disabled"; |
| }; |
| |
| &ecap0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ecap0_pins_default>; |
| }; |
| |
| &sdhci1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_mmc1_pins_default>; |
| ti,driver-strength-ohm = <50>; |
| disable-wp; |
| }; |
| |
| &usb0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb0_pins_default>; |
| dr_mode = "host"; |
| }; |
| |
| &usb1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb1_pins_default>; |
| dr_mode = "host"; |
| }; |
| |
| &mcu_spi0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcu_spi0_pins_default>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,pindir-d0-out-d1-in; |
| }; |
| |
| &tscadc1 { |
| status = "okay"; |
| adc { |
| ti,adc-channels = <0 1 2 3 4 5>; |
| }; |
| }; |
| |
| &ospi0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0x0>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <1>; |
| spi-max-frequency = <50000000>; |
| cdns,tshsl-ns = <60>; |
| cdns,tsd2d-ns = <60>; |
| cdns,tchsh-ns = <60>; |
| cdns,tslch-ns = <60>; |
| cdns,read-delay = <2>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| seboot@0 { |
| label = "seboot"; |
| reg = <0x0 0x180000>; /* 1.5M */ |
| }; |
| |
| tispl@180000 { |
| label = "tispl"; |
| reg = <0x180000 0x200000>; /* 2M */ |
| }; |
| |
| u-boot@380000 { |
| label = "u-boot"; |
| reg = <0x380000 0x300000>; /* 3M */ |
| }; |
| |
| env@680000 { |
| label = "env"; |
| reg = <0x680000 0x20000>; /* 128K */ |
| }; |
| |
| env-backup@6a0000 { |
| label = "env.backup"; |
| reg = <0x6a0000 0x20000>; /* 128K */ |
| }; |
| |
| otpcmd@6c0000 { |
| label = "otpcmd"; |
| reg = <0x6c0000 0x10000>; /* 64K */ |
| }; |
| |
| unused@6d0000 { |
| label = "unused"; |
| reg = <0x6d0000 0x7b0000>; /* 7872K */ |
| }; |
| |
| seboot-backup@e80000 { |
| label = "seboot.backup"; |
| reg = <0xe80000 0x180000>; /* 1.5M */ |
| }; |
| }; |
| }; |
| }; |
| |
| &dss { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dss_vout1_pins_default>; |
| |
| assigned-clocks = <&k3_clks 67 2>; |
| assigned-clock-parents = <&k3_clks 67 5>; |
| }; |
| |
| &dss_ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@1 { |
| reg = <1>; |
| |
| dpi_out: endpoint { |
| remote-endpoint = <&bridge_in>; |
| }; |
| }; |
| }; |
| |
| &pcie1_rc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&minipcie_pins_default>; |
| |
| num-lanes = <1>; |
| phys = <&serdes1 PHY_TYPE_PCIE 0>; |
| phy-names = "pcie-phy0"; |
| reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &mailbox0_cluster0 { |
| status = "okay"; |
| interrupts = <436>; |
| |
| mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { |
| ti,mbox-tx = <1 0 0>; |
| ti,mbox-rx = <0 0 0>; |
| }; |
| }; |
| |
| &mailbox0_cluster1 { |
| status = "okay"; |
| interrupts = <432>; |
| |
| mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { |
| ti,mbox-tx = <1 0 0>; |
| ti,mbox-rx = <0 0 0>; |
| }; |
| }; |
| |
| &mcu_r5fss0_core0 { |
| memory-region = <&mcu_r5fss0_core0_dma_memory_region>, |
| <&mcu_r5fss0_core0_memory_region>; |
| mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; |
| }; |
| |
| &mcu_r5fss0_core1 { |
| memory-region = <&mcu_r5fss0_core1_dma_memory_region>, |
| <&mcu_r5fss0_core1_memory_region>; |
| mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; |
| }; |
| |
| &mcu_rti1 { |
| memory-region = <&wdt_reset_memory_region>; |
| }; |