Blackfin: unify u-boot linker scripts
All the Blackfin linker scripts were duplicated across the board dirs with
no difference save from the semi-often used ENV_IS_EMBEDDED option. So
unify all of them in the lib_blackfin/ dir and for the few boards that
need to embedded the environment directly, add a LDS_BOARD_TEXT define for
them to customize via their board config file. This is much simpler than
forcing them to duplicate the rest of the linker script.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/board/bf518f-ezbrd/.gitignore b/board/bf518f-ezbrd/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf518f-ezbrd/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf518f-ezbrd/Makefile b/board/bf518f-ezbrd/Makefile
index 1b21728..f2bd2c2 100644
--- a/board/bf518f-ezbrd/Makefile
+++ b/board/bf518f-ezbrd/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf518f-ezbrd/config.mk b/board/bf518f-ezbrd/config.mk
index f4a5a80..eaa09ff 100644
--- a/board/bf518f-ezbrd/config.mk
+++ b/board/bf518f-ezbrd/config.mk
@@ -26,7 +26,5 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf518f-ezbrd/u-boot.lds.S b/board/bf518f-ezbrd/u-boot.lds.S
deleted file mode 100644
index 3e8be35..0000000
--- a/board/bf518f-ezbrd/u-boot.lds.S
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf526-ezbrd/.gitignore b/board/bf526-ezbrd/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf526-ezbrd/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf526-ezbrd/Makefile b/board/bf526-ezbrd/Makefile
index 88846ba..a9ff760 100644
--- a/board/bf526-ezbrd/Makefile
+++ b/board/bf526-ezbrd/Makefile
@@ -36,12 +36,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf526-ezbrd/config.mk b/board/bf526-ezbrd/config.mk
index f4a5a80..eaa09ff 100644
--- a/board/bf526-ezbrd/config.mk
+++ b/board/bf526-ezbrd/config.mk
@@ -26,7 +26,5 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf526-ezbrd/u-boot.lds.S b/board/bf526-ezbrd/u-boot.lds.S
deleted file mode 100644
index 3e8be35..0000000
--- a/board/bf526-ezbrd/u-boot.lds.S
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf527-ezkit/.gitignore b/board/bf527-ezkit/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf527-ezkit/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf527-ezkit/Makefile b/board/bf527-ezkit/Makefile
index c2b98ec..1a2f4b1 100644
--- a/board/bf527-ezkit/Makefile
+++ b/board/bf527-ezkit/Makefile
@@ -36,12 +36,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf527-ezkit/config.mk b/board/bf527-ezkit/config.mk
index f4a5a80..eaa09ff 100644
--- a/board/bf527-ezkit/config.mk
+++ b/board/bf527-ezkit/config.mk
@@ -26,7 +26,5 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf527-ezkit/u-boot.lds.S b/board/bf527-ezkit/u-boot.lds.S
deleted file mode 100644
index 3e8be35..0000000
--- a/board/bf527-ezkit/u-boot.lds.S
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf533-ezkit/.gitignore b/board/bf533-ezkit/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf533-ezkit/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile
index 1260277..487b737 100644
--- a/board/bf533-ezkit/Makefile
+++ b/board/bf533-ezkit/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk
index c8b9fb8..9847924 100644
--- a/board/bf533-ezkit/config.mk
+++ b/board/bf533-ezkit/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S
deleted file mode 100644
index f80f894..0000000
--- a/board/bf533-ezkit/u-boot.lds.S
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
- lib_generic/zlib.o (.text .text.*)
- board/bf533-ezkit/bf533-ezkit.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf533-stamp/.gitignore b/board/bf533-stamp/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf533-stamp/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile
index 0f52837..dbba12b 100644
--- a/board/bf533-stamp/Makefile
+++ b/board/bf533-stamp/Makefile
@@ -36,12 +36,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk
index c8b9fb8..9847924 100644
--- a/board/bf533-stamp/config.mk
+++ b/board/bf533-stamp/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf533-stamp/u-boot.lds.S b/board/bf533-stamp/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/bf533-stamp/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf537-minotaur/.gitignore b/board/bf537-minotaur/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf537-minotaur/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf537-minotaur/Makefile b/board/bf537-minotaur/Makefile
index 1b21728..f2bd2c2 100644
--- a/board/bf537-minotaur/Makefile
+++ b/board/bf537-minotaur/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf537-minotaur/config.mk b/board/bf537-minotaur/config.mk
index feafcef..d830843 100644
--- a/board/bf537-minotaur/config.mk
+++ b/board/bf537-minotaur/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf537-minotaur/u-boot.lds.S b/board/bf537-minotaur/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/bf537-minotaur/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf537-pnav/.gitignore b/board/bf537-pnav/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf537-pnav/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf537-pnav/Makefile b/board/bf537-pnav/Makefile
index 1b21728..f2bd2c2 100644
--- a/board/bf537-pnav/Makefile
+++ b/board/bf537-pnav/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf537-pnav/config.mk b/board/bf537-pnav/config.mk
index f4a5a80..eaa09ff 100644
--- a/board/bf537-pnav/config.mk
+++ b/board/bf537-pnav/config.mk
@@ -26,7 +26,5 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf537-pnav/u-boot.lds.S b/board/bf537-pnav/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/bf537-pnav/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf537-srv1/.gitignore b/board/bf537-srv1/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf537-srv1/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf537-srv1/Makefile b/board/bf537-srv1/Makefile
index 1b21728..f2bd2c2 100644
--- a/board/bf537-srv1/Makefile
+++ b/board/bf537-srv1/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf537-srv1/config.mk b/board/bf537-srv1/config.mk
index feafcef..d830843 100644
--- a/board/bf537-srv1/config.mk
+++ b/board/bf537-srv1/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf537-srv1/u-boot.lds.S b/board/bf537-srv1/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/bf537-srv1/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf537-stamp/.gitignore b/board/bf537-stamp/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf537-stamp/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index 1dbf406..4c9e015 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -39,12 +39,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk
index 719b97e..d9e884e 100644
--- a/board/bf537-stamp/config.mk
+++ b/board/bf537-stamp/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/bf537-stamp/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf538f-ezkit/.gitignore b/board/bf538f-ezkit/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf538f-ezkit/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf538f-ezkit/Makefile b/board/bf538f-ezkit/Makefile
index 1b21728..f2bd2c2 100644
--- a/board/bf538f-ezkit/Makefile
+++ b/board/bf538f-ezkit/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf538f-ezkit/config.mk b/board/bf538f-ezkit/config.mk
index c8b9fb8..9847924 100644
--- a/board/bf538f-ezkit/config.mk
+++ b/board/bf538f-ezkit/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf538f-ezkit/u-boot.lds.S b/board/bf538f-ezkit/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/bf538f-ezkit/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf548-ezkit/.gitignore b/board/bf548-ezkit/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf548-ezkit/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf548-ezkit/Makefile b/board/bf548-ezkit/Makefile
index c2b98ec..1a2f4b1 100644
--- a/board/bf548-ezkit/Makefile
+++ b/board/bf548-ezkit/Makefile
@@ -36,12 +36,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf548-ezkit/config.mk b/board/bf548-ezkit/config.mk
index 8b471f6..95ab6b3 100644
--- a/board/bf548-ezkit/config.mk
+++ b/board/bf548-ezkit/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
diff --git a/board/bf548-ezkit/u-boot.lds.S b/board/bf548-ezkit/u-boot.lds.S
deleted file mode 100644
index 3e8be35..0000000
--- a/board/bf548-ezkit/u-boot.lds.S
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/bf561-ezkit/.gitignore b/board/bf561-ezkit/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/bf561-ezkit/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile
index daebb74..bfeaf79 100644
--- a/board/bf561-ezkit/Makefile
+++ b/board/bf561-ezkit/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk
index 710809a..77c888b 100644
--- a/board/bf561-ezkit/config.mk
+++ b/board/bf561-ezkit/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S
deleted file mode 100644
index e6d3ddc..0000000
--- a/board/bf561-ezkit/u-boot.lds.S
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
-# define L1_CODE_ORIGIN L1_INST_SRAM
-#else
-# define L1_CODE_ORIGIN L1_INST_SRAM + 0xC
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_CODE_ORIGIN, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
- lib_generic/zlib.o (.text .text.*)
- board/bf561-ezkit/bf561-ezkit.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/blackstamp/.gitignore b/board/blackstamp/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/blackstamp/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/blackstamp/Makefile b/board/blackstamp/Makefile
index 1b21728..f2bd2c2 100644
--- a/board/blackstamp/Makefile
+++ b/board/blackstamp/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/blackstamp/config.mk b/board/blackstamp/config.mk
index f4a5a80..eaa09ff 100644
--- a/board/blackstamp/config.mk
+++ b/board/blackstamp/config.mk
@@ -26,7 +26,5 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/blackstamp/u-boot.lds.S b/board/blackstamp/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/blackstamp/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/cm-bf527/.gitignore b/board/cm-bf527/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/cm-bf527/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/cm-bf527/Makefile b/board/cm-bf527/Makefile
index 07d285e..c2cd244 100644
--- a/board/cm-bf527/Makefile
+++ b/board/cm-bf527/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/cm-bf527/config.mk b/board/cm-bf527/config.mk
index f4a5a80..eaa09ff 100644
--- a/board/cm-bf527/config.mk
+++ b/board/cm-bf527/config.mk
@@ -26,7 +26,5 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/cm-bf527/u-boot.lds.S b/board/cm-bf527/u-boot.lds.S
deleted file mode 100644
index 3e8be35..0000000
--- a/board/cm-bf527/u-boot.lds.S
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/cm-bf533/.gitignore b/board/cm-bf533/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/cm-bf533/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/cm-bf533/Makefile b/board/cm-bf533/Makefile
index 1b21728..f2bd2c2 100644
--- a/board/cm-bf533/Makefile
+++ b/board/cm-bf533/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/cm-bf533/config.mk b/board/cm-bf533/config.mk
index c8b9fb8..9847924 100644
--- a/board/cm-bf533/config.mk
+++ b/board/cm-bf533/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/cm-bf533/u-boot.lds.S b/board/cm-bf533/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/cm-bf533/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/cm-bf537e/.gitignore b/board/cm-bf537e/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/cm-bf537e/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/cm-bf537e/Makefile b/board/cm-bf537e/Makefile
index f8c270e..3812ba1 100644
--- a/board/cm-bf537e/Makefile
+++ b/board/cm-bf537e/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/cm-bf537e/config.mk b/board/cm-bf537e/config.mk
index c8b9fb8..9847924 100644
--- a/board/cm-bf537e/config.mk
+++ b/board/cm-bf537e/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/cm-bf537e/u-boot.lds.S b/board/cm-bf537e/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/cm-bf537e/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/cm-bf548/.gitignore b/board/cm-bf548/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/cm-bf548/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/cm-bf548/Makefile b/board/cm-bf548/Makefile
index c2b98ec..1a2f4b1 100644
--- a/board/cm-bf548/Makefile
+++ b/board/cm-bf548/Makefile
@@ -36,12 +36,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/cm-bf548/config.mk b/board/cm-bf548/config.mk
index 0dbce93..396f20a 100644
--- a/board/cm-bf548/config.mk
+++ b/board/cm-bf548/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
diff --git a/board/cm-bf548/u-boot.lds.S b/board/cm-bf548/u-boot.lds.S
deleted file mode 100644
index 3e8be35..0000000
--- a/board/cm-bf548/u-boot.lds.S
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/cm-bf561/.gitignore b/board/cm-bf561/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/cm-bf561/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/cm-bf561/Makefile b/board/cm-bf561/Makefile
index 1b21728..f2bd2c2 100644
--- a/board/cm-bf561/Makefile
+++ b/board/cm-bf561/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/cm-bf561/config.mk b/board/cm-bf561/config.mk
index 710809a..77c888b 100644
--- a/board/cm-bf561/config.mk
+++ b/board/cm-bf561/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/cm-bf561/u-boot.lds.S b/board/cm-bf561/u-boot.lds.S
deleted file mode 100644
index 0339546..0000000
--- a/board/cm-bf561/u-boot.lds.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
-# define L1_CODE_ORIGIN L1_INST_SRAM
-#else
-# define L1_CODE_ORIGIN L1_INST_SRAM + 0xC
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_CODE_ORIGIN, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/ibf-dsp561/.gitignore b/board/ibf-dsp561/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/ibf-dsp561/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/ibf-dsp561/Makefile b/board/ibf-dsp561/Makefile
index daebb74..bfeaf79 100644
--- a/board/ibf-dsp561/Makefile
+++ b/board/ibf-dsp561/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/ibf-dsp561/config.mk b/board/ibf-dsp561/config.mk
index 710809a..77c888b 100644
--- a/board/ibf-dsp561/config.mk
+++ b/board/ibf-dsp561/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/ibf-dsp561/u-boot.lds.S b/board/ibf-dsp561/u-boot.lds.S
deleted file mode 100644
index 247caa7..0000000
--- a/board/ibf-dsp561/u-boot.lds.S
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
-#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
-# define L1_CODE_ORIGIN L1_INST_SRAM
-#else
-# define L1_CODE_ORIGIN L1_INST_SRAM + 0xC
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_CODE_ORIGIN, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
- lib_generic/zlib.o (.text .text.*)
- board/ibf-dsp561/ibf-dsp561.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}
diff --git a/board/tcm-bf537/.gitignore b/board/tcm-bf537/.gitignore
deleted file mode 100644
index 945f324..0000000
--- a/board/tcm-bf537/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/u-boot.lds
diff --git a/board/tcm-bf537/Makefile b/board/tcm-bf537/Makefile
index f8c270e..3812ba1 100644
--- a/board/tcm-bf537/Makefile
+++ b/board/tcm-bf537/Makefile
@@ -35,12 +35,9 @@
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-$(obj)u-boot.lds: u-boot.lds.S
- $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
-
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/tcm-bf537/config.mk b/board/tcm-bf537/config.mk
index c8b9fb8..9847924 100644
--- a/board/tcm-bf537/config.mk
+++ b/board/tcm-bf537/config.mk
@@ -26,8 +26,6 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
-
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/tcm-bf537/u-boot.lds.S b/board/tcm-bf537/u-boot.lds.S
deleted file mode 100644
index 8ddfa81..0000000
--- a/board/tcm-bf537/u-boot.lds.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * U-boot - u-boot.lds.S
- *
- * Copyright (c) 2005-2008 Analog Device Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#undef ALIGN
-#undef ENTRY
-#undef bfin
-
-/* If we don't actually load anything into L1 data, this will avoid
- * a syntax error. If we do actually load something into L1 data,
- * we'll get a linker memory load error (which is what we'd want).
- * This is here in the first place so we can quickly test building
- * for different CPU's which may lack non-cache L1 data.
- */
-#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
-# define L1_DATA_B_SRAM_SIZE 0
-#endif
-
-OUTPUT_ARCH(bfin)
-
-MEMORY
-{
- ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
- l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
- l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
-}
-
-ENTRY(_start)
-SECTIONS
-{
- .text :
- {
- cpu/blackfin/start.o (.text .text.*)
-
-#ifdef ENV_IS_EMBEDDED
- /* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-
- cpu/blackfin/traps.o (.text .text.*)
- cpu/blackfin/interrupt.o (.text .text.*)
- cpu/blackfin/serial.o (.text .text.*)
- common/dlmalloc.o (.text .text.*)
- lib_generic/crc32.o (.text .text.*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text .text.*)
-#endif
-
- __initcode_start = .;
- cpu/blackfin/initcode.o (.text .text.*)
- __initcode_end = .;
-
- *(.text .text.*)
- } >ram
-
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata .rodata.*)
- *(.rodata1)
- *(.eh_frame)
- . = ALIGN(4);
- } >ram
-
- .data :
- {
- . = ALIGN(256);
- *(.data .data.*)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- } >ram
-
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
- } >ram
-
- .text_l1 :
- {
- . = ALIGN(4);
- __stext_l1 = .;
- *(.l1.text)
- . = ALIGN(4);
- __etext_l1 = .;
- } >l1_code AT>ram
- __stext_l1_lma = LOADADDR(.text_l1);
-
- .data_l1 :
- {
- . = ALIGN(4);
- __sdata_l1 = .;
- *(.l1.data)
- *(.l1.bss)
- . = ALIGN(4);
- __edata_l1 = .;
- } >l1_data AT>ram
- __sdata_l1_lma = LOADADDR(.data_l1);
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss .bss.*)
- *(COMMON)
- __bss_end = .;
- } >ram
-}