i2c: fsl_i2c: Fix style violations
Fix some style violations in the fsl_i2c I2C driver, and use shorter
type names for variables in some cases.
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index ff3dc25..d957cf6 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -116,10 +116,10 @@
*
* The return value is the actual bus speed that is set.
*/
-static unsigned int set_i2c_bus_speed(const struct fsl_i2c_base *base,
- unsigned int i2c_clk, unsigned int speed)
+static uint set_i2c_bus_speed(const struct fsl_i2c_base *base,
+ uint i2c_clk, uint speed)
{
- unsigned short divider = min(i2c_clk / speed, (unsigned int)USHRT_MAX);
+ ushort divider = min(i2c_clk / speed, (uint)USHRT_MAX);
/*
* We want to choose an FDR/DFSR that generates an I2C bus speed that
@@ -130,8 +130,8 @@
#ifdef __PPC__
u8 dfsr, fdr = 0x31; /* Default if no FDR found */
/* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */
- unsigned short a, b, ga, gb;
- unsigned long c_div, est_div;
+ ushort a, b, ga, gb;
+ ulong c_div, est_div;
#ifdef CONFIG_FSL_I2C_CUSTOM_DFSR
dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR;
@@ -151,18 +151,21 @@
for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) {
for (gb = 0; gb < 8; gb++) {
b = 16 << gb;
- c_div = b * (a + ((3*dfsr)/b)*2);
- if ((c_div > divider) && (c_div < est_div)) {
- unsigned short bin_gb, bin_ga;
+ c_div = b * (a + ((3 * dfsr) / b) * 2);
+ if (c_div > divider && c_div < est_div) {
+ ushort bin_gb, bin_ga;
est_div = c_div;
bin_gb = gb << 2;
bin_ga = (ga & 0x3) | ((ga & 0x4) << 3);
fdr = bin_gb | bin_ga;
speed = i2c_clk / est_div;
- debug("FDR:0x%.2x, div:%ld, ga:0x%x, gb:0x%x, "
- "a:%d, b:%d, speed:%d\n",
- fdr, est_div, ga, gb, a, b, speed);
+
+ debug("FDR: 0x%.2x, ", fdr);
+ debug("div: %ld, ", est_div);
+ debug("ga: 0x%x, gb: 0x%x, ", ga, gb);
+ debug("a: %d, b: %d, speed: %d\n", a, b, speed);
+
/* Condition 2 not accounted for */
debug("Tr <= %d ns\n",
(b - 3 * dfsr) * 1000000 /
@@ -174,13 +177,13 @@
if (a == 24)
a += 4;
}
- debug("divider:%d, est_div:%ld, DFSR:%d\n", divider, est_div, dfsr);
- debug("FDR:0x%.2x, speed:%d\n", fdr, speed);
+ debug("divider: %d, est_div: %ld, DFSR: %d\n", divider, est_div, dfsr);
+ debug("FDR: 0x%.2x, speed: %d\n", fdr, speed);
#endif
writeb(dfsr, &base->dfsrr); /* set default filter */
writeb(fdr, &base->fdr); /* set bus speed */
#else
- unsigned int i;
+ uint i;
for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++)
if (fsl_i2c_speed_map[i].divider >= divider) {
@@ -197,7 +200,7 @@
}
#ifndef CONFIG_DM_I2C
-static unsigned int get_i2c_clock(int bus)
+static uint get_i2c_clock(int bus)
{
if (bus)
return gd->arch.i2c2_clk; /* I2C2 clock */
@@ -211,10 +214,11 @@
const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
unsigned long long timeval = 0;
int ret = -1;
- unsigned int flags = 0;
+ uint flags = 0;
#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447
- unsigned int svr = get_svr();
+ uint svr = get_svr();
+
if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) ||
(SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV))
flags = I2C_CR_BIT6;
@@ -263,7 +267,7 @@
/* Call board specific i2c bus reset routine before accessing the
* environment, which might be in a chip on that bus. For details
* about this problem see doc/I2C_Edge_Conditions.
- */
+ */
i2c_init_board();
#endif
writeb(0, &base->cr); /* stop I2C controller */
@@ -286,8 +290,7 @@
}
}
-static int
-i2c_wait4bus(const struct fsl_i2c_base *base)
+static int i2c_wait4bus(const struct fsl_i2c_base *base)
{
unsigned long long timeval = get_ticks();
const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
@@ -300,8 +303,7 @@
return 0;
}
-static inline int
-i2c_wait(const struct fsl_i2c_base *base, int write)
+static inline int i2c_wait(const struct fsl_i2c_base *base, int write)
{
u32 csr;
unsigned long long timeval = get_ticks();
@@ -317,29 +319,29 @@
writeb(0x0, &base->sr);
if (csr & I2C_SR_MAL) {
- debug("i2c_wait: MAL\n");
+ debug("%s: MAL\n", __func__);
return -1;
}
if (!(csr & I2C_SR_MCF)) {
- debug("i2c_wait: unfinished\n");
+ debug("%s: unfinished\n", __func__);
return -1;
}
if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) {
- debug("i2c_wait: No RXACK\n");
+ debug("%s: No RXACK\n", __func__);
return -1;
}
return 0;
} while ((get_ticks() - timeval) < timeout);
- debug("i2c_wait: timed out\n");
+ debug("%s: timed out\n", __func__);
return -1;
}
-static inline int
-i2c_write_addr(const struct fsl_i2c_base *base, u8 dev, u8 dir, int rsta)
+static inline int i2c_write_addr(const struct fsl_i2c_base *base, u8 dev,
+ u8 dir, int rsta)
{
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
| (rsta ? I2C_CR_RSTA : 0),
@@ -353,8 +355,8 @@
return 1;
}
-static inline int
-__i2c_write_data(const struct fsl_i2c_base *base, u8 *data, int length)
+static inline int __i2c_write_data(const struct fsl_i2c_base *base, u8 *data,
+ int length)
{
int i;
@@ -368,8 +370,8 @@
return i;
}
-static inline int
-__i2c_read_data(const struct fsl_i2c_base *base, u8 *data, int length)
+static inline int __i2c_read_data(const struct fsl_i2c_base *base, u8 *data,
+ int length)
{
int i;
@@ -399,9 +401,8 @@
return i;
}
-static int
-__i2c_read(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset, int olen,
- u8 *data, int dlen)
+static int __i2c_read(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset,
+ int olen, u8 *data, int dlen)
{
int ret = -1; /* signal error */
@@ -447,9 +448,8 @@
return -1;
}
-static int
-__i2c_write(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset, int olen,
- u8 *data, int dlen)
+static int __i2c_write(const struct fsl_i2c_base *base, u8 chip_addr,
+ u8 *offset, int olen, u8 *data, int dlen)
{
int ret = -1; /* signal error */
@@ -471,10 +471,9 @@
return -1;
}
-static int
-__i2c_probe_chip(const struct fsl_i2c_base *base, uchar chip)
+static int __i2c_probe_chip(const struct fsl_i2c_base *base, uchar chip)
{
- /* For unknow reason the controller will ACK when
+ /* For unknown reason the controller will ACK when
* probing for a slave with the same address, so skip
* it.
*/
@@ -484,8 +483,8 @@
return __i2c_read(base, chip, 0, 0, NULL, 0);
}
-static unsigned int __i2c_set_bus_speed(const struct fsl_i2c_base *base,
- unsigned int speed, int i2c_clk)
+static uint __i2c_set_bus_speed(const struct fsl_i2c_base *base,
+ uint speed, int i2c_clk)
{
writeb(0, &base->cr); /* stop controller */
set_i2c_bus_speed(base, i2c_clk, speed);
@@ -501,32 +500,30 @@
get_i2c_clock(adap->hwadapnr), adap->hwadapnr);
}
-static int
-fsl_i2c_probe_chip(struct i2c_adapter *adap, uchar chip)
+static int fsl_i2c_probe_chip(struct i2c_adapter *adap, uchar chip)
{
return __i2c_probe_chip(i2c_base[adap->hwadapnr], chip);
}
-static int
-fsl_i2c_read(struct i2c_adapter *adap, u8 chip_addr, uint offset, int olen,
- u8 *data, int dlen)
+static int fsl_i2c_read(struct i2c_adapter *adap, u8 chip_addr, uint offset,
+ int olen, u8 *data, int dlen)
{
u8 *o = (u8 *)&offset;
+
return __i2c_read(i2c_base[adap->hwadapnr], chip_addr, &o[4 - olen],
olen, data, dlen);
}
-static int
-fsl_i2c_write(struct i2c_adapter *adap, u8 chip_addr, uint offset, int olen,
- u8 *data, int dlen)
+static int fsl_i2c_write(struct i2c_adapter *adap, u8 chip_addr, uint offset,
+ int olen, u8 *data, int dlen)
{
u8 *o = (u8 *)&offset;
+
return __i2c_write(i2c_base[adap->hwadapnr], chip_addr, &o[4 - olen],
olen, data, dlen);
}
-static unsigned int fsl_i2c_set_bus_speed(struct i2c_adapter *adap,
- unsigned int speed)
+static uint fsl_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
{
return __i2c_set_bus_speed(i2c_base[adap->hwadapnr], speed,
get_i2c_clock(adap->hwadapnr));
@@ -562,12 +559,14 @@
u32 chip_flags)
{
struct fsl_i2c_dev *dev = dev_get_priv(bus);
+
return __i2c_probe_chip(dev->base, chip_addr);
}
-static int fsl_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+static int fsl_i2c_set_bus_speed(struct udevice *bus, uint speed)
{
struct fsl_i2c_dev *dev = dev_get_priv(bus);
+
return __i2c_set_bus_speed(dev->base, speed, dev->i2c_clk);
}
@@ -600,6 +599,7 @@
static int fsl_i2c_probe(struct udevice *bus)
{
struct fsl_i2c_dev *dev = dev_get_priv(bus);
+
__i2c_init(dev->base, dev->speed, dev->slaveadd, dev->i2c_clk,
dev->index);
return 0;
@@ -613,7 +613,8 @@
memset(&dummy, 0, sizeof(struct i2c_msg));
/* We expect either two messages (one with an offset and one with the
- * actucal data) or one message (just data) */
+ * actual data) or one message (just data)
+ */
if (nmsgs > 2 || nmsgs == 0) {
debug("%s: Only one or two messages are supported.", __func__);
return -1;