arm: armada: dts: Use a single dtsi for cp110 die description
Use a single dtsi file for CP110 die instead of master/slave.
Moving to single file will allow miltiple DTSI inclusions with
re-defined CP index and name.
This change will also allow support for SoCs containing more than
two CP110 dies on board.
Move pin control definitions from CP110 DTS to board DTS files
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/dts/armada-7040-db-nand.dts b/arch/arm/dts/armada-7040-db-nand.dts
index 3a9df21..f249c71 100644
--- a/arch/arm/dts/armada-7040-db-nand.dts
+++ b/arch/arm/dts/armada-7040-db-nand.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2017 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -58,8 +21,8 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- spi0 = &cpm_spi1;
+ i2c0 = &cp0_i2c0;
+ spi0 = &cp0_spi1;
};
memory@00000000 {
@@ -83,18 +46,18 @@
};
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_pinctl {
+&cp0_pinctl {
/* MPP Bus:
* AUDIO [0-5]
* GBE [6-11]
@@ -122,9 +85,9 @@
0xe 0xe 0x0>;
};
-&cpm_spi1 {
+&cp0_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_spi0_pins>;
+ pinctrl-0 = <&cp0_spi0_pins>;
status = "disabled";
spi-flash@0 {
@@ -152,19 +115,19 @@
};
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_usb3_0 {
+&cp0_usb3_0 {
status = "okay";
};
-&cpm_usb3_1 {
+&cp0_usb3_1 {
status = "okay";
};
-&cpm_comphy {
+&cp0_comphy {
phy0 {
phy-type = <PHY_TYPE_SGMII2>;
phy-speed = <PHY_SPEED_3_125G>;
@@ -196,15 +159,15 @@
};
};
-&cpm_nand {
+&cp0_nand {
status = "okay";
};
-&cpm_utmi0 {
+&cp0_utmi0 {
status = "okay";
};
-&cpm_utmi1 {
+&cp0_utmi1 {
status = "okay";
};
@@ -215,7 +178,7 @@
non-removable;
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index cfd2b4b..6037f12 100644
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -57,8 +20,8 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- spi0 = &cpm_spi1;
+ i2c0 = &cp0_i2c0;
+ spi0 = &cp0_spi1;
};
memory@00000000 {
@@ -82,18 +45,18 @@
};
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_pinctl {
+&cp0_pinctl {
/* MPP Bus:
* TDM [0-11]
* SPI [13-16]
@@ -115,9 +78,9 @@
0xE 0xE 0xE >;
};
-&cpm_spi1 {
+&cp0_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_spi0_pins>;
+ pinctrl-0 = <&cp0_spi0_pins>;
status = "okay";
spi-flash@0 {
@@ -145,19 +108,19 @@
};
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_usb3_0 {
+&cp0_usb3_0 {
status = "okay";
};
-&cpm_usb3_1 {
+&cp0_usb3_1 {
status = "okay";
};
-&cpm_comphy {
+&cp0_comphy {
phy0 {
phy-type = <PHY_TYPE_SGMII1>;
phy-speed = <PHY_SPEED_1_25G>;
@@ -188,11 +151,11 @@
};
};
-&cpm_utmi0 {
+&cp0_utmi0 {
status = "okay";
};
-&cpm_utmi1 {
+&cp0_utmi1 {
status = "okay";
};
@@ -203,14 +166,14 @@
non-removable;
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
non-removable;
};
-&cpm_mdio {
+&cp0_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
@@ -219,22 +182,22 @@
};
};
-&cpm_ethernet {
+&cp0_ethernet {
status = "okay";
};
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
phy-mode = "sfi"; /* lane-2 */
};
-&cpm_eth1 {
+&cp0_eth1 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
diff --git a/arch/arm/dts/armada-7040.dtsi b/arch/arm/dts/armada-7040.dtsi
index b5be0c4..ee9716a 100644
--- a/arch/arm/dts/armada-7040.dtsi
+++ b/arch/arm/dts/armada-7040.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -46,11 +9,56 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include "armada-common.dtsi"
+#include "armada-8k.dtsi"
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
+
+/* CP110-0 Settings */
+#define CP110_NAME cp0
+#define CP110_NUM 0
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
/ {
model = "Marvell Armada 7040";
compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
"marvell,armada-ap806";
};
+
+&cp0_pinctl {
+ compatible = "marvell,mvebu-pinctrl", "marvell,7k-pinctrl";
+ bank-name ="cp0-110";
+
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = < 37 38 >;
+ marvell,function = <2>;
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = < 35 36 >;
+ marvell,function = <2>;
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11>;
+ marvell,function = <3>;
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = < 44 45 46 47 48 49 50 51
+ 52 53 54 55 >;
+ marvell,function = <1>;
+ };
+ cp0_pca0_pins: cp0-pca0_pins {
+ marvell,pins = <62>;
+ marvell,function = <0>;
+ };
+ cp0_sdhci_pins: cp0-sdhi-pins-0 {
+ marvell,pins = < 56 57 58 59 60 61 >;
+ marvell,function = <14>;
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = < 13 14 15 16 >;
+ marvell,function = <3>;
+ };
+};
diff --git a/arch/arm/dts/armada-8020.dtsi b/arch/arm/dts/armada-8020.dtsi
index 048e5cf..4c71cf3 100644
--- a/arch/arm/dts/armada-8020.dtsi
+++ b/arch/arm/dts/armada-8020.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -45,9 +8,27 @@
* two CP110.
*/
+#include "armada-common.dtsi"
+#include "armada-8k.dtsi"
#include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+
+/* CP110-0 Settings */
+#define CP110_NAME cp0
+#define CP110_NUM 0
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
+/* CP110-1 Settings */
+#define CP110_NAME cp1
+#define CP110_NUM 1
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
/ {
model = "Marvell Armada 8020";
diff --git a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
index 720c950..86df6ac 100644
--- a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
@@ -15,9 +15,9 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- i2c1 = &cpm_i2c1;
- spi0 = &cps_spi1;
+ i2c0 = &cp0_i2c0;
+ i2c1 = &cp0_i2c1;
+ spi0 = &cp1_spi1;
};
memory@00000000 {
@@ -31,14 +31,14 @@
reg_usb3h0_vbus: usb3-vbus0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "reg-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <300000>;
shutdown-delay-us = <500000>;
regulator-force-boot-off;
- gpio = <&cpm_gpio1 15 GPIO_ACTIVE_LOW>; /* GPIO[47] */
+ gpio = <&cp0_gpio1 15 GPIO_ACTIVE_LOW>; /* GPIO[47] */
};
};
};
@@ -66,7 +66,7 @@
status = "okay";
};
-&cpm_pinctl {
+&cp0_pinctl {
/*
* MPP Bus:
* [0-31] = 0xff: Keep default CP0_shared_pins:
@@ -99,57 +99,57 @@
0 0 0 0 0 0 0xe 0xe 0xe 0xe
0xe 0xe 0 >;
- cpm_pcie_reset_pins: cpm-pcie-reset-pins {
+ cp0_pcie_reset_pins: cp0-pcie-reset-pins {
marvell,pins = < 32 >;
marvell,function = <0>;
};
- cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ cp0_xhci_vbus_pins: cp0-xhci-vbus-pins {
marvell,pins = < 47 >;
marvell,function = <0>;
};
- cps_1g_phy_reset: cps-1g-phy-reset {
+ cp1_1g_phy_reset: cp1-1g-phy-reset {
marvell,pins = < 43 >;
marvell,function = <0>;
};
};
/* uSD slot */
-&cpm_sdhci0 {
+&cp0_sdhci0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
bus-width = <4>;
status = "okay";
};
-&cpm_pcie0 {
+&cp0_pcie0 {
num-lanes = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_pcie_reset_pins>;
- marvell,reset-gpio = <&cpm_gpio1 0 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&cp0_pcie_reset_pins>;
+ marvell,reset-gpio = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_i2c1 {
+&cp0_i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c1_pins>;
+ pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_comphy {
+&cp0_comphy {
/*
* CP0 Serdes Configuration:
* Lane 0: PCIe0 (x1)
@@ -179,31 +179,31 @@
};
};
-&cpm_ethernet {
+&cp0_ethernet {
pinctrl-names = "default";
status = "okay";
};
/* 10G SFI SFP */
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
phy-mode = "sfi";
};
-&cps_sata0 {
+&cp1_sata0 {
status = "okay";
};
-&cps_usb3_0 {
+&cp1_usb3_0 {
vbus-supply = <®_usb3h0_vbus>;
status = "okay";
};
-&cps_utmi0 {
+&cp1_utmi0 {
status = "okay";
};
-&cps_pinctl {
+&cp1_pinctl {
/*
* MPP Bus:
* [0-5] TDM
@@ -234,9 +234,9 @@
0xff 0xff 0xff>;
};
-&cps_spi1 {
+&cp1_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cps_spi1_pins>;
+ pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
spi-flash@0 {
@@ -261,7 +261,7 @@
};
};
-&cps_comphy {
+&cp1_comphy {
/*
* CP1 Serdes Configuration:
* Lane 0: SATA 1 (RX swapped). Can be PCIe0
@@ -294,30 +294,30 @@
};
};
-&cps_mdio {
+&cp1_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
};
-&cps_ethernet {
+&cp1_ethernet {
pinctrl-names = "default";
- pinctrl-0 = <&cps_1g_phy_reset>;
+ pinctrl-0 = <&cp1_1g_phy_reset>;
status = "okay";
};
/* 1G SGMII */
-&cps_eth1 {
+&cp1_eth1 {
status = "okay";
phy-mode = "sgmii";
phy = <&phy0>;
- phy-reset-gpios = <&cpm_gpio1 11 GPIO_ACTIVE_LOW>;
+ phy-reset-gpios = <&cp0_gpio1 11 GPIO_ACTIVE_LOW>;
};
/* 2.5G to Topaz switch */
-&cps_eth2 {
+&cp1_eth2 {
status = "okay";
phy-mode = "sgmii";
phy-speed = <2500>;
- phy-reset-gpios = <&cps_gpio0 24 GPIO_ACTIVE_LOW>;
+ phy-reset-gpios = <&cp1_gpio0 24 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
index 65b30bb..a2b7c99 100644
--- a/arch/arm/dts/armada-8040-db.dts
+++ b/arch/arm/dts/armada-8040-db.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016 - 2021 Marvell International Ltd.
*/
/*
@@ -56,8 +19,8 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- spi0 = &cps_spi1;
+ i2c0 = &cp0_i2c0;
+ spi0 = &cp1_spi1;
};
memory@00000000 {
@@ -88,7 +51,7 @@
status = "okay";
};
-&cpm_pinctl {
+&cp0_pinctl {
/* MPP Bus:
* [0-31] = 0xff: Keep default CP0_shared_pins
* [11] CLKOUT_MPP_11 (out)
@@ -116,7 +79,7 @@
0xe 0xe 0xe>;
};
-&cpm_comphy {
+&cp0_comphy {
/* Serdes Configuration:
* Lane 0: PCIe0 (x1)
* Lane 1: SATA0
@@ -146,57 +109,57 @@
};
/* CON6 on CP0 expansion */
-&cpm_pcie0 {
+&cp0_pcie0 {
status = "okay";
};
-&cpm_pcie1 {
+&cp0_pcie1 {
status = "disabled";
};
/* CON5 on CP0 expansion */
-&cpm_pcie2 {
+&cp0_pcie2 {
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
/* CON4 on CP0 expansion */
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
/* CON9 on CP0 expansion */
-&cpm_usb3_0 {
+&cp0_usb3_0 {
status = "okay";
};
/* CON10 on CP0 expansion */
-&cpm_usb3_1 {
+&cp0_usb3_1 {
status = "okay";
};
-&cpm_utmi0 {
+&cp0_utmi0 {
status = "okay";
};
-&cpm_utmi1 {
+&cp0_utmi1 {
status = "okay";
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
bus-width = <4>;
status = "okay";
};
-&cps_pinctl {
+&cp1_pinctl {
/* MPP Bus:
* [0-11] RGMII0
* [13-16] SPI1
@@ -215,7 +178,7 @@
0xff 0xff 0xff>;
};
-&cps_comphy {
+&cp1_comphy {
/* Serdes Configuration:
* Lane 0: PCIe0 (x1)
* Lane 1: SATA0
@@ -245,22 +208,22 @@
};
/* CON6 on CP1 expansion */
-&cps_pcie0 {
+&cp1_pcie0 {
status = "okay";
};
-&cps_pcie1 {
+&cp1_pcie1 {
status = "okay";
};
/* CON5 on CP1 expansion */
-&cps_pcie2 {
+&cp1_pcie2 {
status = "okay";
};
-&cps_spi1 {
+&cp1_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cps_spi1_pins>;
+ pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
spi-flash@0 {
@@ -288,35 +251,35 @@
};
/* CON4 on CP1 expansion */
-&cps_sata0 {
+&cp1_sata0 {
status = "okay";
};
/* CON9 on CP1 expansion */
-&cps_usb3_0 {
+&cp1_usb3_0 {
status = "okay";
};
/* CON10 on CP1 expansion */
-&cps_usb3_1 {
+&cp1_usb3_1 {
status = "okay";
};
-&cps_utmi0 {
+&cp1_utmi0 {
status = "okay";
};
-&cpm_mdio {
+&cp0_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
-&cpm_ethernet {
+&cp0_ethernet {
status = "okay";
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts
index 5a046d9..b0a36e3 100644
--- a/arch/arm/dts/armada-8040-mcbin.dts
+++ b/arch/arm/dts/armada-8040-mcbin.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2016 Marvell International Ltd.
+ * Copyright (C) 2016 - 2021 Marvell International Ltd.
*/
#include "armada-8040.dtsi" /* include SoC device tree */
@@ -15,12 +15,12 @@
};
aliases {
- i2c0 = &cpm_i2c0;
- i2c1 = &cpm_i2c1;
- spi0 = &cps_spi1;
+ i2c0 = &cp0_i2c0;
+ i2c1 = &cp0_i2c1;
+ spi0 = &cp1_spi1;
gpio0 = &ap_gpio0;
- gpio1 = &cpm_gpio0;
- gpio2 = &cpm_gpio1;
+ gpio1 = &cp0_gpio0;
+ gpio2 = &cp0_gpio1;
};
memory@00000000 {
@@ -36,7 +36,7 @@
reg_usb3h0_vbus: usb3-vbus0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "reg-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -44,7 +44,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&cpm_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
+ gpio = <&cp0_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
};
};
};
@@ -73,7 +73,7 @@
status = "okay";
};
-&cpm_pinctl {
+&cp0_pinctl {
/*
* MPP Bus:
* [0-31] = 0xff: Keep default CP0_shared_pins:
@@ -108,59 +108,59 @@
0 0 0 0 0 0 0xe 0xe 0xe 0xe
0xe 0xe 0 >;
- cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ cp0_xhci_vbus_pins: cp0-xhci-vbus-pins {
marvell,pins = < 47 >;
marvell,function = <0>;
};
- cpm_pcie_reset_pins: cpm-pcie-reset-pins {
+ cp0_pcie_reset_pins: cp0-pcie-reset-pins {
marvell,pins = < 52 >;
marvell,function = <0>;
};
};
/* uSD slot */
-&cpm_sdhci0 {
+&cp0_sdhci0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
bus-width= <4>;
status = "okay";
};
/* PCIe x4 */
-&cpm_pcie0 {
+&cp0_pcie0 {
num-lanes = <4>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_pcie_reset_pins>;
- marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
+ pinctrl-0 = <&cp0_pcie_reset_pins>;
+ marvell,reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_i2c1 {
+&cp0_i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c1_pins>;
+ pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
clock-frequency = <100000>;
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_mdio {
+&cp0_mdio {
ge_phy: ethernet-phy@0 {
reg = <0>;
};
};
-&cpm_comphy {
+&cp0_comphy {
/*
* CP0 Serdes Configuration:
* Lane 0: PCIe0 (x4)
@@ -190,30 +190,30 @@
};
};
-&cps_sata0 {
+&cp1_sata0 {
status = "okay";
};
-&cps_usb3_0 {
+&cp1_usb3_0 {
vbus-supply = <®_usb3h0_vbus>;
status = "okay";
};
-&cps_utmi0 {
+&cp1_utmi0 {
status = "okay";
};
-&cps_ethernet {
+&cp1_ethernet {
status = "okay";
};
-&cps_eth1 {
+&cp1_eth1 {
status = "okay";
phy = <&ge_phy>;
phy-mode = "sgmii";
};
-&cps_pinctl {
+&cp1_pinctl {
/*
* MPP Bus:
* [0-5] TDM
@@ -246,9 +246,9 @@
0xff 0xff 0xff>;
};
-&cps_spi1 {
+&cp1_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&cps_spi1_pins>;
+ pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
spi-flash@0 {
@@ -275,7 +275,7 @@
};
};
-&cps_comphy {
+&cp1_comphy {
/*
* CP1 Serdes Configuration:
* Lane 0: SGMII1
diff --git a/arch/arm/dts/armada-8040-puzzle-m801.dts b/arch/arm/dts/armada-8040-puzzle-m801.dts
index 58edb5b..ff46ce5 100644
--- a/arch/arm/dts/armada-8040-puzzle-m801.dts
+++ b/arch/arm/dts/armada-8040-puzzle-m801.dts
@@ -16,14 +16,14 @@
};
aliases {
- i2c0 = &i2c0;
- i2c1 = &cpm_i2c0;
- i2c2 = &cpm_i2c1;
+ i2c0 = &ap_i2c0;
+ i2c1 = &cp0_i2c0;
+ i2c2 = &cp0_i2c1;
i2c3 = &i2c_switch;
- spi0 = &spi0;
+ spi0 = &ap_spi0;
gpio0 = &ap_gpio0;
- gpio1 = &cpm_gpio0;
- gpio2 = &cpm_gpio1;
+ gpio1 = &cp0_gpio0;
+ gpio2 = &cp0_gpio1;
gpio3 = &sfpplus_gpio;
};
@@ -40,7 +40,7 @@
reg_usb3h0_vbus: usb3-vbus0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "reg-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -48,12 +48,12 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&cpm_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
+ gpio = <&cp0_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
};
};
};
-&i2c0 {
+&ap_i2c0 {
status = "okay";
clock-frequency = <100000>;
@@ -83,7 +83,7 @@
0 3 0 0 0 0 0 0 0 3 >;
};
-&cpm_pinctl {
+&cp0_pinctl {
/*
* MPP Bus:
* [0-31] = 0xff: Keep default CP0_shared_pins:
@@ -118,35 +118,35 @@
0 0 0 0 0 0 0xe 0xe 0xe 0xe
0xe 0xe 0 >;
- cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ cp0_xhci_vbus_pins: cpm-xhci-vbus-pins {
marvell,pins = < 47 >;
marvell,function = <0>;
};
- cpm_pcie_reset_pins: cpm-pcie-reset-pins {
+ cp0_pcie_reset_pins: cpm-pcie-reset-pins {
marvell,pins = < 52 >;
marvell,function = <0>;
};
};
-&cpm_sdhci0 {
+&cp0_sdhci0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_sdhci_pins>;
+ pinctrl-0 = <&cp0_sdhci_pins>;
bus-width= <4>;
status = "okay";
};
-&cpm_pcie0 {
+&cp0_pcie0 {
num-lanes = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&cpm_pcie_reset_pins>;
- marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
+ pinctrl-0 = <&cp0_pcie_reset_pins>;
+ marvell,reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
status = "okay";
};
-&cpm_i2c0 {
+&cp0_i2c0 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c0_pins>;
+ pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
@@ -158,9 +158,9 @@
};
};
-&cpm_i2c1 {
+&cp0_i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&cpm_i2c1_pins>;
+ pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
clock-frequency = <100000>;
@@ -172,44 +172,44 @@
};
};
-&cpm_sata0 {
+&cp0_sata0 {
status = "okay";
};
-&cpm_ethernet {
+&cp0_ethernet {
pinctrl-names = "default";
status = "okay";
};
-&cpm_mdio {
+&cp0_mdio {
status = "okay";
- cpm_ge_phy0: ethernet-phy@1 {
+ cp0_ge_phy0: ethernet-phy@1 {
reg = <0>;
};
- cpm_ge_phy1: ethernet-phy@2 {
+ cp0_ge_phy1: ethernet-phy@2 {
reg = <1>;
};
};
-&cpm_eth0 {
+&cp0_eth0 {
status = "okay";
phy-mode = "sfi";
};
-&cpm_eth1 {
+&cp0_eth1 {
status = "okay";
phy-mode = "sgmii";
- phy = <&cpm_ge_phy0>;
+ phy = <&cp0_ge_phy0>;
};
-&cpm_eth2 {
+&cp0_eth2 {
status = "okay";
phy-mode = "sgmii";
- phy = <&cpm_ge_phy1>;
+ phy = <&cp0_ge_phy1>;
};
-&cpm_comphy {
+&cp0_comphy {
/*
* CP0 Serdes Configuration:
* Lane 0: PCIe0 (x1)
@@ -241,54 +241,54 @@
};
};
-&cps_mdio {
+&cp1_mdio {
status = "okay";
- cps_ge_phy0: ethernet-phy@3 {
+ cp1_ge_phy0: ethernet-phy@3 {
reg = <1>;
};
- cps_ge_phy1: ethernet-phy@4 {
+ cp1_ge_phy1: ethernet-phy@4 {
reg = <0>;
};
};
-&cps_pcie0 {
+&cp1_pcie0 {
num-lanes = <2>;
pinctrl-names = "default";
status = "okay";
};
-&cps_usb3_0 {
+&cp1_usb3_0 {
vbus-supply = <®_usb3h0_vbus>;
status = "okay";
};
-&cps_utmi0 {
+&cp1_utmi0 {
status = "okay";
};
-&cps_ethernet {
+&cp1_ethernet {
status = "okay";
};
-&cps_eth0 {
+&cp1_eth0 {
status = "okay";
phy-mode = "sfi";
};
-&cps_eth1 {
+&cp1_eth1 {
status = "okay";
- phy = <&cps_ge_phy0>;
+ phy = <&cp1_ge_phy0>;
phy-mode = "sgmii";
};
-&cps_eth2 {
+&cp1_eth2 {
status = "okay";
- phy = <&cps_ge_phy1>;
+ phy = <&cp1_ge_phy1>;
phy-mode = "sgmii";
};
-&cps_pinctl {
+&cp1_pinctl {
/*
* MPP Bus:
* [0-5] TDM
@@ -321,7 +321,7 @@
0xff 0xff 0xff>;
};
-&spi0 {
+&ap_spi0 {
status = "okay";
spi-flash@0 {
@@ -356,7 +356,7 @@
};
};
-&cps_comphy {
+&cp1_comphy {
/*
* CP1 Serdes Configuration:
* Lane 0: PCIe0 (x2)
diff --git a/arch/arm/dts/armada-8040.dtsi b/arch/arm/dts/armada-8040.dtsi
index 96cc112..1d77e75 100644
--- a/arch/arm/dts/armada-8040.dtsi
+++ b/arch/arm/dts/armada-8040.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
@@ -46,12 +9,80 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include "armada-common.dtsi"
+#include "armada-8k.dtsi"
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+
+/* CP110-0 Settings */
+#define CP110_NAME cp0
+#define CP110_NUM 0
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
+/* CP110-1 Settings */
+#define CP110_NAME cp1
+#define CP110_NUM 1
+
+#include "armada-cp110.dtsi"
+
+#undef CP110_NAME
+#undef CP110_NUM
+
/ {
model = "Marvell Armada 8040";
compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
"marvell,armada-ap806";
};
+
+&cp0_pinctl {
+ compatible = "marvell,mvebu-pinctrl", "marvell,8k-cpm-pinctrl";
+ bank-name ="cp0-110";
+
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = < 37 38 >;
+ marvell,function = <2>;
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = < 35 36 >;
+ marvell,function = <2>;
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11>;
+ marvell,function = <3>;
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = < 44 45 46 47 48 49 50 51
+ 52 53 54 55 >;
+ marvell,function = <1>;
+ };
+ cp0_pca0_pins: cp0-pca0_pins {
+ marvell,pins = <62>;
+ marvell,function = <0>;
+ };
+ cp0_sdhci_pins: cp0-sdhi-pins-0 {
+ marvell,pins = < 56 57 58 59 60 61 >;
+ marvell,function = <14>;
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = < 13 14 15 16 >;
+ marvell,function = <3>;
+ };
+};
+
+&cp1_pinctl {
+ compatible = "marvell,mvebu-pinctrl", "marvell,8k-cps-pinctrl";
+ bank-name ="cp1-110";
+
+ cp1_ge1_rgmii_pins: cp1-ge-rgmii-pins-0 {
+ marvell,pins = < 0 1 2 3 4 5 6 7 8 9 10 11 >;
+ marvell,function = <3>;
+ };
+ cp1_spi1_pins: cp1-spi-pins-1 {
+ marvell,pins = < 13 14 15 16 >;
+ marvell,function = <3>;
+ };
+};
diff --git a/arch/arm/dts/armada-8k.dtsi b/arch/arm/dts/armada-8k.dtsi
new file mode 100644
index 0000000..c6af9ce
--- /dev/null
+++ b/arch/arm/dts/armada-8k.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 - 2021 Marvell International Ltd.
+ */
+/* Common definitions used by Armada 8K DTs */
+
+/* This defines used to calculate the base address of each CP */
+#define CP110_BASE_OFFSET (0xf2000000)
+#define CP110_SPACE_SIZE (0x02000000)
+#define CP110_BASE (CP110_BASE_OFFSET + \
+ ((CP110_NUM % 2) * CP110_SPACE_SIZE))
+
+#define CP110_PCIE_MEM_SIZE(iface) (0xf00000)
+#define CP110_PCIEx_CPU_MEM_BASE(iface) \
+ (0xf6000000 + (CP110_NUM % 2) * 0x4000000 + (iface) * 0x1000000)
+#define CP110_PCIEx_BUS_MEM_BASE(iface) \
+ (CP110_PCIEx_CPU_MEM_BASE(iface))
+#define CP110_PCIE_BUS_MEM_CFG (0x82000000)
diff --git a/arch/arm/dts/armada-common.dtsi b/arch/arm/dts/armada-common.dtsi
new file mode 100644
index 0000000..b7dfbda
--- /dev/null
+++ b/arch/arm/dts/armada-common.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Marvell International Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y) x ## _ ## y
+#define EVALUATOR(x, y) PASTER(x, y)
+
+/* This define used to create die label:
+ * For example:
+ * CP110 master:
+ * CP110_LABEL(spi0) -> cp0_spi0
+ * CP110 slave:
+ * CP110_LABEL(usb0) -> cp1_usb0
+ */
+#define CP110_LABEL(name) EVALUATOR(CP110_NAME, name)
+
+#define APPEND_NX(A, B) A ##-## B
+#define APPEND(A, B) APPEND_NX(A, B)
+
+#define STRINGIZE_NX(x) #x
+#define STRINGIZE(x) STRINGIZE_NX(x)
+
+/* Same idea here, but this define convert the name to string:
+ * For example:
+ * master: CP110_STRING_LABEL(ppv2) -> "cp0-ppv2"
+ * slave: CP110_STRING_LABEL(ppv2) -> "cp1-ppv2"
+ */
+#define CP110_STRING_LABEL(name) STRINGIZE(APPEND(CP110_NAME, name))
diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi
deleted file mode 100644
index 7d0d31d..0000000
--- a/arch/arm/dts/armada-cp110-master.dtsi
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada CP110 Master.
- */
-
-#include <dt-bindings/comphy/comphy_data.h>
-
-/ {
- cp110-master {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- config-space {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges = <0x0 0x0 0xf2000000 0x2000000>;
-
- cpm_ethernet: ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
- clock-names = "pp_clk", "gop_clk", "mg_clk";
- status = "disabled";
- dma-coherent;
-
- cpm_eth0: eth0 {
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- cpm_eth1: eth1 {
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- cpm_eth2: eth2 {
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- cpm_mdio: mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- device-name = "cpm-mdio";
- };
-
- cpm_xmdio: mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x16>;
- status = "disabled";
- device-name = "cpm-xmdio";
- };
-
- cpm_syscon0: system-controller@440000 {
- compatible = "marvell,cp110-system-controller0",
- "syscon";
- reg = <0x440000 0x1000>;
- #clock-cells = <2>;
- core-clock-output-names =
- "cpm-apll", "cpm-ppv2-core", "cpm-eip",
- "cpm-core", "cpm-nand-core";
- gate-clock-output-names =
- "cpm-audio", "cpm-communit", "cpm-nand",
- "cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
- "cpm-mg-core", "cpm-xor1", "cpm-xor0",
- "cpm-gop-dp", "none", "cpm-pcie_x10",
- "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
- "cpm-sata", "cpm-sata-usb", "cpm-main",
- "cpm-sd-mmc", "none", "none",
- "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
- "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
- };
-
- cpm_pinctl: cpm-pinctl@440000 {
- compatible = "marvell,mvebu-pinctrl",
- "marvell,armada-7k-pinctrl",
- "marvell,armada-8k-cpm-pinctrl";
- bank-name ="cp0-110";
- reg = <0x440000 0x20>;
- pin-count = <63>;
- max-func = <0xf>;
-
- cpm_i2c0_pins: cpm-i2c-pins-0 {
- marvell,pins = < 37 38 >;
- marvell,function = <2>;
- };
- cpm_i2c1_pins: cpm-i2c-pins-1 {
- marvell,pins = < 35 36 >;
- marvell,function = <2>;
- };
- cpm_ge2_rgmii_pins: cpm-ge-rgmii-pins-0 {
- marvell,pins = < 44 45 46 47 48 49 50 51
- 52 53 54 55 >;
- marvell,function = <1>;
- };
- pca0_pins: cpm-pca0_pins {
- marvell,pins = <62>;
- marvell,function = <0>;
- };
- cpm_sdhci_pins: cpm-sdhi-pins-0 {
- marvell,pins = < 56 57 58 59 60 61 >;
- marvell,function = <14>;
- };
- cpm_spi0_pins: cpm-spi-pins-0 {
- marvell,pins = < 13 14 15 16 >;
- marvell,function = <3>;
- };
- };
-
- cpm_gpio0: gpio@440100 {
- compatible = "marvell,orion-gpio";
- reg = <0x440100 0x40>;
- ngpios = <32>;
- gpiobase = <20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- cpm_gpio1: gpio@440140 {
- compatible = "marvell,orion-gpio";
- reg = <0x440140 0x40>;
- ngpios = <31>;
- gpiobase = <52>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- cpm_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 15>;
- status = "disabled";
- };
-
- cpm_usb3_0: usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 22>;
- status = "disabled";
- };
-
- cpm_usb3_1: usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 23>;
- status = "disabled";
- };
-
- cpm_spi0: spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- cell-index = <1>;
- clocks = <&cpm_syscon0 0 3>;
- status = "disabled";
- };
-
- cpm_spi1: spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- clocks = <&cpm_syscon0 1 21>;
- status = "disabled";
- };
-
- cpm_i2c0: i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 21>;
- status = "disabled";
- };
-
- cpm_i2c1: i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_syscon0 1 21>;
- status = "disabled";
- };
-
- cpm_comphy: comphy@441000 {
- compatible = "marvell,mvebu-comphy", "marvell,comphy-cp110";
- reg = <0x441000 0x8>,
- <0x120000 0x8>;
- mux-bitcount = <4>;
- max-lanes = <6>;
- };
-
- cpm_utmi0: utmi@580000 {
- compatible = "marvell,mvebu-utmi-2.6.0";
- reg = <0x580000 0x1000>, /* utmi-unit */
- <0x440420 0x4>, /* usb-cfg */
- <0x440440 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
- status = "disabled";
- };
-
- cpm_utmi1: utmi@581000 {
- compatible = "marvell,mvebu-utmi-2.6.0";
- reg = <0x581000 0x1000>, /* utmi-unit */
- <0x440420 0x4>, /* usb-cfg */
- <0x440444 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB3_HOST1>;
- status = "disabled";
- };
-
- cpm_sdhci0: sdhci@780000 {
- compatible = "marvell,armada-8k-sdhci";
- reg = <0x780000 0x300>;
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- dma-coherent;
- status = "disabled";
- };
-
- cpm_nand: nand@720000 {
- compatible = "marvell,armada-8k-nand-controller",
- "marvell,armada370-nand-controller";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&cpm_syscon0 1 2>,
- <&cpm_syscon0 1 17>;
- marvell,system-controller = <&cpm_syscon0>;
- nand-enable-arbiter;
- num-cs = <1>;
- status = "disabled";
- };
-
- };
-
- cpm_pcie0: pcie@f2600000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2600000 0 0x10000>,
- <0 0xf6f00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clocks = <&cpm_syscon0 1 13>;
- status = "disabled";
- };
-
- cpm_pcie1: pcie@f2620000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2620000 0 0x10000>,
- <0 0xf7f00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9010000 0 0xf9010000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cpm_syscon0 1 11>;
- status = "disabled";
- };
-
- cpm_pcie2: pcie@f2640000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf2640000 0 0x10000>,
- <0 0xf8f00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xf9020000 0 0xf9020000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cpm_syscon0 1 12>;
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/armada-cp110-slave.dtsi b/arch/arm/dts/armada-cp110-slave.dtsi
deleted file mode 100644
index 6cf2177..0000000
--- a/arch/arm/dts/armada-cp110-slave.dtsi
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada CP110 Slave.
- */
-
-#include <dt-bindings/comphy/comphy_data.h>
-
-/ {
- cp110-slave {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- config-space {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges = <0x0 0x0 0xf4000000 0x2000000>;
-
- cps_ethernet: ethernet@0 {
- compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
- clock-names = "pp_clk", "gop_clk", "mg_clk";
- status = "disabled";
- dma-coherent;
-
- cps_eth0: eth0 {
- interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <0>;
- gop-port-id = <0>;
- status = "disabled";
- };
-
- cps_eth1: eth1 {
- interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <1>;
- gop-port-id = <2>;
- status = "disabled";
- };
-
- cps_eth2: eth2 {
- interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
- port-id = <2>;
- gop-port-id = <3>;
- status = "disabled";
- };
- };
-
- cps_mdio: mdio@12a200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x12a200 0x10>;
- device-name = "cps-mdio";
- };
-
- cps_xmdio: mdio@12a600 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,xmdio";
- reg = <0x12a600 0x16>;
- status = "disabled";
- device-name = "cps-xmdio";
- };
-
- cps_syscon0: system-controller@440000 {
- compatible = "marvell,cp110-system-controller0",
- "syscon";
- reg = <0x440000 0x1000>;
- #clock-cells = <2>;
- core-clock-output-names =
- "cps-apll", "cps-ppv2-core", "cps-eip",
- "cps-core", "cps-nand-core";
- gate-clock-output-names =
- "cps-audio", "cps-communit", "cps-nand",
- "cps-ppv2", "cps-sdio", "cps-mg-domain",
- "cps-mg-core", "cps-xor1", "cps-xor0",
- "cps-gop-dp", "none", "cps-pcie_x10",
- "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
- "cps-sata", "cps-sata-usb", "cps-main",
- "cps-sd-mmc", "none", "none",
- "cps-slow-io", "cps-usb3h0", "cps-usb3h1",
- "cps-usb3dev", "cps-eip150", "cps-eip197";
- };
-
- cps_pinctl: cps-pinctl@440000 {
- compatible = "marvell,mvebu-pinctrl",
- "marvell,armada-8k-cps-pinctrl";
- bank-name ="cp1-110";
- reg = <0x440000 0x20>;
- pin-count = <63>;
- max-func = <0xf>;
-
- cps_ge1_rgmii_pins: cps-ge-rgmii-pins-0 {
- marvell,pins = < 0 1 2 3 4 5 6 7
- 8 9 10 11 >;
- marvell,function = <3>;
- };
- cps_spi1_pins: cps-spi-pins-1 {
- marvell,pins = < 13 14 15 16 >;
- marvell,function = <3>;
- };
- };
-
- cps_gpio0: gpio@440100 {
- compatible = "marvell,orion-gpio";
- reg = <0x440100 0x40>;
- ngpios = <32>;
- gpiobase = <20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- cps_gpio1: gpio@440140 {
- compatible = "marvell,orion-gpio";
- reg = <0x440140 0x40>;
- ngpios = <31>;
- gpiobase = <52>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- cps_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 15>;
- status = "disabled";
- };
-
- cps_usb3_0: usb3@500000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x500000 0x4000>;
- dma-coherent;
- interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 22>;
- status = "disabled";
- };
-
- cps_usb3_1: usb3@510000 {
- compatible = "marvell,armada-8k-xhci",
- "generic-xhci";
- reg = <0x510000 0x4000>;
- dma-coherent;
- interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 23>;
- status = "disabled";
- };
-
- cps_xor0: xor@6a0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6a0000 0x1000>,
- <0x6b0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clocks = <&cps_syscon0 1 8>;
- };
-
- cps_xor1: xor@6c0000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x6c0000 0x1000>,
- <0x6d0000 0x1000>;
- dma-coherent;
- msi-parent = <&gic_v2m0>;
- clocks = <&cps_syscon0 1 7>;
- };
-
- cps_spi0: spi@700600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700600 0x50>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- cell-index = <1>;
- clocks = <&cps_syscon0 0 3>;
- status = "disabled";
- };
-
- cps_spi1: spi@700680 {
- compatible = "marvell,armada-380-spi";
- reg = <0x700680 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- clocks = <&cps_syscon0 1 21>;
- status = "disabled";
- };
-
- cps_i2c0: i2c@701000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 21>;
- status = "disabled";
- };
-
- cps_i2c1: i2c@701100 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x701100 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_syscon0 1 21>;
- status = "disabled";
- };
-
- cps_comphy: comphy@441000 {
- compatible = "marvell,mvebu-comphy", "marvell,comphy-cp110";
- reg = <0x441000 0x8>,
- <0x120000 0x8>;
- mux-bitcount = <4>;
- max-lanes = <6>;
- };
-
- cps_utmi0: utmi@580000 {
- compatible = "marvell,mvebu-utmi-2.6.0";
- reg = <0x580000 0x1000>, /* utmi-unit */
- <0x440420 0x4>, /* usb-cfg */
- <0x440440 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
- status = "disabled";
- };
-
- cps_nand: nand@720000 {
- compatible = "marvell,armada-8k-nand-controller",
- "marvell,armada370-nand-controller";
- reg = <0x720000 0x54>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core", "reg";
- clocks = <&cps_syscon0 1 2>,
- <&cps_syscon0 1 17>;
- marvell,system-controller = <&cps_syscon0>;
- nand-enable-arbiter;
- num-cs = <1>;
- status = "disabled";
- };
- };
-
- cps_pcie0: pcie@f4600000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4600000 0 0x10000>,
- <0 0xfaf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd000000 0 0xfd000000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
- num-lanes = <1>;
- clocks = <&cps_syscon0 1 13>;
- status = "disabled";
- };
-
- cps_pcie1: pcie@f4620000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4620000 0 0x10000>,
- <0 0xfbf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd010000 0 0xfd010000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cps_syscon0 1 11>;
- status = "disabled";
- };
-
- cps_pcie2: pcie@f4640000 {
- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
- reg = <0 0xf4640000 0 0x10000>,
- <0 0xfcf00000 0 0x80000>;
- reg-names = "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- dma-coherent;
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 0xfd020000 0 0xfd020000 0 0x10000
- /* non-prefetchable memory */
- 0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
-
- num-lanes = <1>;
- clocks = <&cps_syscon0 1 12>;
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/armada-cp110.dtsi b/arch/arm/dts/armada-cp110.dtsi
new file mode 100644
index 0000000..8241c64
--- /dev/null
+++ b/arch/arm/dts/armada-cp110.dtsi
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016- 2021 Marvell International Ltd.
+ */
+
+/*
+ * Generic Device Tree describing Marvell Armada CP-110 device
+ */
+
+#include <dt-bindings/comphy/comphy_data.h>
+
+#define U64_TO_U32_H(addr) (((addr) >> 32) & 0xffffffff)
+#define U64_TO_U32_L(addr) ((addr) & 0xffffffff)
+
+#define CP110_PCIEx_REG0_BASE(iface) \
+ (CP110_BASE + 0x600000 + (iface) * 0x20000)
+#define CP110_PCIEx_REG1_BASE(iface) \
+ (CP110_PCIEx_CPU_MEM_BASE(iface) + CP110_PCIE_MEM_SIZE(iface))
+#define CP110_PCIE_EP_REG_BASE(iface) (CP110_BASE + 0x600000 + \
+ (iface) * 0x4000)
+
+/ {
+ CP110_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ config-space {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges = <0x0 U64_TO_U32_H(CP110_BASE) U64_TO_U32_L(CP110_BASE) 0x2000000>;
+
+ CP110_LABEL(mdio): mdio@12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ device-name = CP110_STRING_LABEL(mdio);
+ status = "disabled";
+ };
+
+ CP110_LABEL(xmdio): mdio@12a600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,xmdio";
+ reg = <0x12a600 0x200>;
+ device-name = CP110_STRING_LABEL(xmdio);
+ status = "disabled";
+ };
+
+ CP110_LABEL(sar-reg) {
+ compatible = "marvell,sample-at-reset-common",
+ "marvell,sample-at-reset-cp110";
+ reg = <0x400200 0x8>;
+ sar-driver = "cp110_sar";
+ sar-name = CP110_STRING_LABEL(sar);
+ status = "okay";
+ };
+
+ CP110_LABEL(syscon0): system-controller@440000 {
+ compatible = "marvell,cp110-system-controller0",
+ "syscon";
+ reg = <0x440000 0x1000>;
+ #clock-cells = <2>;
+ core-clock-output-names =
+ "cpm-apll", "cpm-ppv2-core", "cpm-eip",
+ "cpm-core", "cpm-nand-core";
+ gate-clock-output-names =
+ "cpm-audio", "cpm-communit", "cpm-nand",
+ "cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
+ "cpm-mg-core", "cpm-xor1", "cpm-xor0",
+ "cpm-gop-dp", "none", "cpm-pcie_x10",
+ "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
+ "cpm-sata", "cpm-sata-usb", "cpm-main",
+ "cpm-sd-mmc", "none", "none",
+ "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
+ "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
+ };
+
+ CP110_LABEL(pinctl): pinctl@440000 {
+ compatible = "marvell,mvebu-pinctrl";
+ reg = <0x440000 0x20>;
+ pin-count = <63>;
+ max-func = <0xf>;
+ };
+
+ CP110_LABEL(gpio0): gpio@440100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x440100 0x40>;
+ ngpios = <32>;
+ gpiobase = <20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ CP110_LABEL(gpio1): gpio@440140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x440140 0x40>;
+ ngpios = <31>;
+ gpiobase = <52>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ CP110_LABEL(sata0): sata@540000 {
+ compatible = "marvell,armada-8k-ahci";
+ reg = <0x540000 0x30000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(syscon0) 1 15>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(usb3_0): usb3@500000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x500000 0x4000>;
+ dma-coherent;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(syscon0) 1 22>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(usb3_1): usb3@510000 {
+ compatible = "marvell,armada-8k-xhci",
+ "generic-xhci";
+ reg = <0x510000 0x4000>;
+ dma-coherent;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(syscon0) 1 23>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(spi0): spi@700600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700600 0x50>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ cell-index = <1>;
+ spi-max-frequency = <50000000>;
+ clocks = <&CP110_LABEL(syscon0) 0 3>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(spi1): spi@700680 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x700680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ spi-max-frequency = <50000000>;
+ clocks = <&CP110_LABEL(syscon0) 1 21>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(i2c0): i2c@701000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(syscon0) 1 21>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(i2c1): i2c@701100 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x701100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CP110_LABEL(syscon0) 1 21>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(mss_i2c0): i2c@211000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x211000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(comphy): comphy@441000 {
+ compatible = "marvell,mvebu-comphy", "marvell,comphy-cp110";
+ reg = <0x441000 0x8>,
+ <0x120000 0x8>;
+ mux-bitcount = <4>;
+ max-lanes = <6>;
+ };
+
+ CP110_LABEL(utmi0): utmi@580000 {
+ compatible = "marvell,mvebu-utmi-2.6.0";
+ reg = <0x580000 0x1000>, /* utmi-unit */
+ <0x440420 0x4>, /* usb-cfg */
+ <0x440440 0x4>; /* utmi-cfg */
+ utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(utmi1): utmi@581000 {
+ compatible = "marvell,mvebu-utmi-2.6.0";
+ reg = <0x581000 0x1000>, /* utmi-unit */
+ <0x440420 0x4>, /* usb-cfg */
+ <0x440444 0x4>; /* utmi-cfg */
+ utmi-port = <UTMI_PHY_TO_USB3_HOST1>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(sdhci0): sdhci@780000 {
+ compatible = "marvell,armada-8k-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ CP110_LABEL(nand): nand@720000 {
+ compatible = "marvell,armada-8k-nand-controller",
+ "marvell,armada370-nand-controller";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&CP110_LABEL(syscon0) 1 2>;
+ nand-enable-arbiter;
+ num-cs = <1>;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ marvell,system-controller = <&CP110_LABEL(syscon0)>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(ethernet): ethernet@0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&CP110_LABEL(syscon0) 1 3>, <&CP110_LABEL(syscon0) 1 9>, <&CP110_LABEL(syscon0) 1 5>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk";
+ status = "disabled";
+ dma-coherent;
+
+ CP110_LABEL(eth0): eth0 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(eth1): eth1 {
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(eth2): eth2 {
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+ };
+
+ CP110_LABEL(pcie0): pcie0@600000 {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg =
+ <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(0)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(0)) 0 0x10000>,
+ /* Last 512KB of mem space */
+ <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(0)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(0)) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* non-prefetchable memory */
+ <CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(0))
+ U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(0)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(0))
+ U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(0))
+ U64_TO_U32_H(CP110_PCIE_MEM_SIZE(0)) U64_TO_U32_L(CP110_PCIE_MEM_SIZE(0))>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ num-lanes = <1>;
+ clocks = <&CP110_LABEL(syscon0) 1 13>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(pcie1): pcie1@620000 {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg =
+ <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(1)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(1)) 0 0x10000>,
+ /* Last 512KB of mem space */
+ <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(1)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(1)) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* non-prefetchable memory */
+ <CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(1))
+ U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(1)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(1))
+ U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(1)) U64_TO_U32_H(CP110_PCIE_MEM_SIZE(1))
+ U64_TO_U32_L(CP110_PCIE_MEM_SIZE(1))>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clocks = <&CP110_LABEL(syscon0) 1 11>;
+ status = "disabled";
+ };
+
+ CP110_LABEL(pcie2): pcie2@640000 {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg =
+ <U64_TO_U32_H(CP110_PCIEx_REG0_BASE(2)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(2)) 0 0x10000>,
+ /* Last 64KB of mem space */
+ <U64_TO_U32_H(CP110_PCIEx_REG1_BASE(2)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(2)) 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+
+ bus-range = <0 0xff>;
+ ranges =
+ /* non-prefetchable memory */
+ <CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(2))
+ U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(2)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(2))
+ U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(2)) U64_TO_U32_H(CP110_PCIE_MEM_SIZE(2))
+ U64_TO_U32_L(CP110_PCIE_MEM_SIZE(2))>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+
+ num-lanes = <1>;
+ clocks = <&CP110_LABEL(syscon0) 1 12>;
+ status = "disabled";
+ };
+ };
+};