rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3399.
It provides the following feature set:
* up to 4GB DDR3
* on-module SPI-NOR flash
* on-module eMMC (with 8-bit interace)
* SD card (on a baseboad) via edge connector
* Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY
* HDMI/eDP/MIPI displays
* 2x MIPI-CSI
* USB
- 1x USB 3.0 dual-role (direct connection)
- 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub)
* on-module STM32 Cortex-M0 companion controller, implementing:
- low-power RTC functionality (ISL1208 emulation)
- fan controller (AMC6821 emulation)
- USB<->CAN bridge controller
Note that we use a multi-payload FIT image for booting and have
Cortex-M0 payload in a separate subimage: we thus rely on the FIT
image loader to put it into the SRAM region that ATF expects it in.
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Fixed build warning on puma-rk3399:
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
index 83bd04a..415466a 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -10,6 +10,24 @@
with full function and phisical connectors support like type-C ports,
usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
+config TARGET_PUMA_RK3399
+ bool "Theobroma Systems RK3399-Q7 (Puma)"
+ help
+ The RK3399-Q7 (Puma) is a system-on-module (designed and
+ marketed by Theobroma Systems) featuring the Rockchip RK3399
+ in a Qseven-compatible form-factor (running of a single 5V
+ supply and exposing its external interfaces on a MXM-230
+ connector).
+
+ Key features of the RK3399-Q7 include:
+ * on-module USB 3.0 hub (2x USB 3.0 host + 1x USB 2.0 host)
+ * USB 3.0 dual-role
+ * on-module Micrel KSZ9031 GbE PHY
+ * on-module eMMC (up to 256GB configurations available)
+ * on-module DDR3 (1GB, 2GB and 4GB configurations available)
+ * HDMI, eDP, MIPI-DSI, MIPI-DSI/CSI and MIPI-CSI
+ * SPI, I2C, I2S, UART, GPIO, ...
+
endchoice
config SYS_SOC
@@ -19,5 +37,6 @@
default 0x0800
source "board/rockchip/evb_rk3399/Kconfig"
+source "board/theobroma-systems/puma_rk3399/Kconfig"
endif