Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index cde246d..105942f 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -95,7 +95,7 @@
instead of to CAN/UART1.
-Build and burn u-boot to NOR flash
+Build and burn U-Boot to NOR flash
==================================
1. Build u-boot.bin image
export ARCH=powerpc
@@ -131,7 +131,7 @@
1 - boot from lower 4 sectors
-Build and burn u-boot to NAND flash
+Build and burn U-Boot to NAND flash
===================================
1. Build u-boot.bin image
export ARCH=powerpc
@@ -146,7 +146,7 @@
3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
-Build and burn u-boot to SPI flash
+Build and burn U-Boot to SPI flash
==================================
1. Build u-boot-spi.bin image
make P1010RDB_SPIFLASH_config; make