mx5: Rename mx51_fb_init()
The ipuv3 driver is currently only used on mx51, but it can be extended to work
on mx53 and mx6 as well.
Rename mx51_fb_init(), so that it can be used by other SoCs.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index bc7f057..514a7ac 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -502,7 +502,7 @@
void lcd_enable(void)
{
- int ret = mx51_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
+ int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
if (ret)
printf("LCD cannot be configured: %d\n", ret);
}
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index 282de95..d68bef7 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -604,7 +604,7 @@
gpio_set_value(2, 1);
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
- ret = mx51_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666);
+ ret = ipuv3_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666);
if (ret)
puts("LCD cannot be configured\n");
}
diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c
index 1bee54c..c38e22d 100644
--- a/drivers/video/mxc_ipuv3_fb.c
+++ b/drivers/video/mxc_ipuv3_fb.c
@@ -599,7 +599,7 @@
return;
}
-int mx51_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt)
+int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt)
{
gmode = mode;
gdisp = disp;
diff --git a/include/ipu_pixfmt.h b/include/ipu_pixfmt.h
index 656f605..0019898 100644
--- a/include/ipu_pixfmt.h
+++ b/include/ipu_pixfmt.h
@@ -76,6 +76,6 @@
#define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */
#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */
-int mx51_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt);
+int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt);
#endif