imx: imx8m: drop uneeded check
All i.MX8M needs TZASC ID SWAP set and locked, no need the check to
waste cpu cycles.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index b4c56c3..d261a07 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -72,15 +72,13 @@
* According to TRM, TZASC_ID_SWAP_BYPASS should be set in
* order to avoid AXI Bus errors when GPU is in use
*/
- if (is_imx8mq() || is_imx8mm() || is_imx8mn() || is_imx8mp())
- setbits_le32(&gpr->gpr[10], GPR_TZASC_ID_SWAP_BYPASS);
+ setbits_le32(&gpr->gpr[10], GPR_TZASC_ID_SWAP_BYPASS);
/*
* imx8mn and imx8mp implements the lock bit for
* TZASC_ID_SWAP_BYPASS, enable it to lock settings
*/
- if (is_imx8mn() || is_imx8mp())
- setbits_le32(&gpr->gpr[10], GPR_TZASC_ID_SWAP_BYPASS_LOCK);
+ setbits_le32(&gpr->gpr[10], GPR_TZASC_ID_SWAP_BYPASS_LOCK);
/*
* set Region 0 attribute to allow secure and non-secure