x86: Add Intel Cougar Canyon 2 board
This adds basic support to Intel Cougar Canyon 2 board, a board
based on Chief River platform with an Ivy Bridge processor and
a Panther Point chipset.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/doc/README.x86 b/doc/README.x86
index 6d9cb10..948deca 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -133,6 +133,27 @@
---
+Intel Cougar Canyon 2 specific instructions for bare mode:
+
+This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors
+with mobile Intel HM76 and QM77 chipsets platform. Download it from Intel FSP
+website and put the .fd file (CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd at the
+time of writing) in the board directory and rename it to fsp.bin.
+
+Now build U-Boot and obtain u-boot.rom
+
+$ make cougarcanyon2_defconfig
+$ make all
+
+The board has two 8MB SPI flashes mounted, which are called SPI-0 and SPI-1 in
+the board manual. The SPI-0 flash should have flash descriptor plus ME firmware
+and SPI-1 flash is used to store U-Boot. For convenience, the complete 8MB SPI-0
+flash image is included in the FSP package (named Rom00_8M_MB_PPT.bin). Program
+this image to the SPI-0 flash according to the board manual just once and we are
+all set. For programming U-Boot we just need to program SPI-1 flash.
+
+---
+
Intel Minnowboard Max instructions for bare mode:
This uses as FSP as with Crown Bay, except it is for the Atom E3800 series.