ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8

Import the Renesas R8A7792 DTS and headers from upstream Linux kernel v4.15-rc8,
commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/arch/arm/dts/r8a7792-blanche.dts b/arch/arm/dts/r8a7792-blanche.dts
new file mode 100644
index 0000000..f8dbea5
--- /dev/null
+++ b/arch/arm/dts/r8a7792-blanche.dts
@@ -0,0 +1,327 @@
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Blanche";
+	compatible = "renesas,blanche", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x1_clk: x1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x2_clk: x2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <65000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+		};
+		key-2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		};
+		key-3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+		};
+		key-4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+		};
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW24";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW25";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led17 {
+			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
+		};
+		led18 {
+			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
+		};
+		led19 {
+			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
+		};
+		led20 {
+			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&can_clk {
+	clock-frequency = <48000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif3_pins: scif3 {
+		groups = "scif3_data";
+		function = "scif3";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data", "can_clk";
+		function = "can0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif3 {
+	pinctrl-0 = <&scif3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&irqc>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};