armv8: ls1046ardb: SPL size reduction
Using changes in this patch we were able to reduce approx 4k
size of u-boot-spl.bin image. Following is breif description of
changes to reduce SPL size:
1. Changes in board/freescale/ls1046ardb/Makefile to remove
compilation of eth.c and cpld.c in case of SPL build.
2. Changes in board/freescale/ls1046ardb/ls1046ardb.c to keep
only ddr_init and board_early_init_f funcations in case of SPL
build.
3. Changes in ls1046a_common.h & ls1046ardb.h to remove driver
specific macros due to which static data was being compiled in
case of SPL build.
4. Disable MMC driver from bieng compiled in case of SPL NAND
build and NAND driver from bieng compiled in case of SPL MMC build.
Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/ls1046aqds/Makefile b/board/freescale/ls1046aqds/Makefile
index df6e546..6267522 100644
--- a/board/freescale/ls1046aqds/Makefile
+++ b/board/freescale/ls1046aqds/Makefile
@@ -5,5 +5,7 @@
#
obj-y += ddr.o
+ifndef CONFIG_SPL_BUILD
obj-y += eth.o
+endif
obj-y += ls1046aqds.o
diff --git a/board/freescale/ls1046ardb/Makefile b/board/freescale/ls1046ardb/Makefile
index 348eb76..b92ed0b 100644
--- a/board/freescale/ls1046ardb/Makefile
+++ b/board/freescale/ls1046ardb/Makefile
@@ -4,7 +4,9 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += cpld.o
obj-y += ddr.o
obj-y += ls1046ardb.o
+ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o
+obj-y += cpld.o
+endif
diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c
index 02b6c4c..0cc508b 100644
--- a/board/freescale/ls1046ardb/ls1046ardb.c
+++ b/board/freescale/ls1046ardb/ls1046ardb.c
@@ -24,6 +24,14 @@
DECLARE_GLOBAL_DATA_PTR;
+int board_early_init_f(void)
+{
+ fsl_lsch2_early_init_f();
+
+ return 0;
+}
+
+#ifndef CONFIG_SPL_BUILD
int checkboard(void)
{
static const char *freq[2] = {"100.00MHZ", "156.25MHZ"};
@@ -56,13 +64,6 @@
return 0;
}
-int board_early_init_f(void)
-{
- fsl_lsch2_early_init_f();
-
- return 0;
-}
-
int board_init(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
@@ -161,3 +162,4 @@
return 0;
}
+#endif