drivers/usb/host/ohci-hcd: rename readl/writel to ohci_readl/ohci_writel
This avoids a build warning that you see if anyone in the
header chain has included io.h (which is coming shortly). The previous
code redefined readl/writel; this patch renames it to be specific to
ohci. The defines are also moved from ohci-hcd.c to ohci.h.
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index b03a600..3f76c4e 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -83,17 +83,6 @@
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-/*
- * e.g. PCI controllers need this
- */
-#ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
-# define readl(a) __swap_32(*((volatile u32 *)(a)))
-# define writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
-#else
-# define readl(a) (*((volatile u32 *)(a)))
-# define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
-
#define min_t(type, x, y) \
({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
@@ -147,13 +136,13 @@
struct usb_device *devgone;
static inline u32 roothub_a(struct ohci *hc)
- { return readl(&hc->regs->roothub.a); }
+ { return ohci_readl(&hc->regs->roothub.a); }
static inline u32 roothub_b(struct ohci *hc)
- { return readl(&hc->regs->roothub.b); }
+ { return ohci_readl(&hc->regs->roothub.b); }
static inline u32 roothub_status(struct ohci *hc)
- { return readl(&hc->regs->roothub.status); }
+ { return ohci_readl(&hc->regs->roothub.status); }
static inline u32 roothub_portstatus(struct ohci *hc, int i)
- { return readl(&hc->regs->roothub.portstatus[i]); }
+ { return ohci_readl(&hc->regs->roothub.portstatus[i]); }
/* forward declaration */
static int hc_interrupt(void);
@@ -302,11 +291,11 @@
struct ohci_regs *regs = controller->regs;
__u32 temp;
- temp = readl(®s->revision) & 0xff;
+ temp = ohci_readl(®s->revision) & 0xff;
if (temp != 0x10)
dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
- temp = readl(®s->control);
+ temp = ohci_readl(®s->control);
dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
(temp & OHCI_CTRL_RWE) ? " RWE" : "",
(temp & OHCI_CTRL_RWC) ? " RWC" : "",
@@ -319,7 +308,7 @@
temp & OHCI_CTRL_CBSR
);
- temp = readl(®s->cmdstatus);
+ temp = ohci_readl(®s->cmdstatus);
dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
(temp & OHCI_SOC) >> 16,
(temp & OHCI_OCR) ? " OCR" : "",
@@ -328,18 +317,20 @@
(temp & OHCI_HCR) ? " HCR" : ""
);
- ohci_dump_intr_mask("intrstatus", readl(®s->intrstatus));
- ohci_dump_intr_mask("intrenable", readl(®s->intrenable));
+ ohci_dump_intr_mask("intrstatus", ohci_readl(®s->intrstatus));
+ ohci_dump_intr_mask("intrenable", ohci_readl(®s->intrenable));
- maybe_print_eds("ed_periodcurrent", readl(®s->ed_periodcurrent));
+ maybe_print_eds("ed_periodcurrent",
+ ohci_readl(®s->ed_periodcurrent));
- maybe_print_eds("ed_controlhead", readl(®s->ed_controlhead));
- maybe_print_eds("ed_controlcurrent", readl(®s->ed_controlcurrent));
+ maybe_print_eds("ed_controlhead", ohci_readl(®s->ed_controlhead));
+ maybe_print_eds("ed_controlcurrent",
+ ohci_readl(®s->ed_controlcurrent));
- maybe_print_eds("ed_bulkhead", readl(®s->ed_bulkhead));
- maybe_print_eds("ed_bulkcurrent", readl(®s->ed_bulkcurrent));
+ maybe_print_eds("ed_bulkhead", ohci_readl(®s->ed_bulkhead));
+ maybe_print_eds("ed_bulkcurrent", ohci_readl(®s->ed_bulkcurrent));
- maybe_print_eds("donehead", readl(®s->donehead));
+ maybe_print_eds("donehead", ohci_readl(®s->donehead));
}
static void ohci_dump_roothub(ohci_t *controller, int verbose)
@@ -518,11 +509,11 @@
/* implicitly requeued */
if (urb->dev->irq_handle &&
(urb->dev->irq_act_len = urb->actual_length)) {
- writel(OHCI_INTR_WDH, ®s->intrenable);
- readl(®s->intrenable); /* PCI posting flush */
+ ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
+ ohci_readl(®s->intrenable); /* PCI posting flush */
urb->dev->irq_handle(urb->dev);
- writel(OHCI_INTR_WDH, ®s->intrdisable);
- readl(®s->intrdisable); /* PCI posting flush */
+ ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
+ ohci_readl(®s->intrdisable); /* PCI posting flush */
}
urb->actual_length = 0;
td_submit_job(
@@ -631,7 +622,7 @@
case PIPE_CONTROL:
ed->hwNextED = 0;
if (ohci->ed_controltail == NULL)
- writel(ed, &ohci->regs->ed_controlhead);
+ ohci_writel(ed, &ohci->regs->ed_controlhead);
else
ohci->ed_controltail->hwNextED =
m32_swap((unsigned long)ed);
@@ -640,7 +631,7 @@
if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
!ohci->ed_rm_list[1] && !ohci->sleeping) {
ohci->hc_control |= OHCI_CTRL_CLE;
- writel(ohci->hc_control, &ohci->regs->control);
+ ohci_writel(ohci->hc_control, &ohci->regs->control);
}
ohci->ed_controltail = edi;
break;
@@ -648,7 +639,7 @@
case PIPE_BULK:
ed->hwNextED = 0;
if (ohci->ed_bulktail == NULL)
- writel(ed, &ohci->regs->ed_bulkhead);
+ ohci_writel(ed, &ohci->regs->ed_bulkhead);
else
ohci->ed_bulktail->hwNextED =
m32_swap((unsigned long)ed);
@@ -657,7 +648,7 @@
if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
!ohci->ed_rm_list[1] && !ohci->sleeping) {
ohci->hc_control |= OHCI_CTRL_BLE;
- writel(ohci->hc_control, &ohci->regs->control);
+ ohci_writel(ohci->hc_control, &ohci->regs->control);
}
ohci->ed_bulktail = edi;
break;
@@ -725,9 +716,10 @@
if (ed->ed_prev == NULL) {
if (!ed->hwNextED) {
ohci->hc_control &= ~OHCI_CTRL_CLE;
- writel(ohci->hc_control, &ohci->regs->control);
+ ohci_writel(ohci->hc_control,
+ &ohci->regs->control);
}
- writel(m32_swap(*((__u32 *)&ed->hwNextED)),
+ ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
&ohci->regs->ed_controlhead);
} else {
ed->ed_prev->hwNextED = ed->hwNextED;
@@ -744,9 +736,10 @@
if (ed->ed_prev == NULL) {
if (!ed->hwNextED) {
ohci->hc_control &= ~OHCI_CTRL_BLE;
- writel(ohci->hc_control, &ohci->regs->control);
+ ohci_writel(ohci->hc_control,
+ &ohci->regs->control);
}
- writel(m32_swap(*((__u32 *)&ed->hwNextED)),
+ ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
&ohci->regs->ed_bulkhead);
} else {
ed->ed_prev->hwNextED = ed->hwNextED;
@@ -923,7 +916,7 @@
if (!ohci->sleeping) {
/* start bulk list */
- writel(OHCI_BLF, &ohci->regs->cmdstatus);
+ ohci_writel(OHCI_BLF, &ohci->regs->cmdstatus);
}
break;
@@ -949,7 +942,7 @@
if (!ohci->sleeping) {
/* start Control list */
- writel(OHCI_CLF, &ohci->regs->cmdstatus);
+ ohci_writel(OHCI_CLF, &ohci->regs->cmdstatus);
}
break;
@@ -1224,13 +1217,13 @@
#define OK(x) len = (x); break
#ifdef DEBUG
-#define WR_RH_STAT(x) {info("WR:status %#8x", (x)); writel((x), \
+#define WR_RH_STAT(x) {info("WR:status %#8x", (x)); ohci_writel((x), \
&gohci.regs->roothub.status); }
#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, \
- (x)); writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); }
+ (x)); ohci_writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); }
#else
-#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x) writel((x), \
+#define WR_RH_STAT(x) ohci_writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x) ohci_writel((x), \
&gohci.regs->roothub.portstatus[wIndex-1])
#endif
#define RD_RH_STAT roothub_status(&gohci)
@@ -1661,10 +1654,10 @@
int timeout = 1000;
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
- writel(readl(base + EHCI_USBCMD_OFF) | EHCI_USBCMD_HCRESET,
- base + EHCI_USBCMD_OFF);
+ base += EHCI_USBCMD_OFF;
+ ohci_writel(ohci_readl(base) | EHCI_USBCMD_HCRESET, base);
- while (readl(base + EHCI_USBCMD_OFF) & EHCI_USBCMD_HCRESET) {
+ while (ohci_readl(base) & EHCI_USBCMD_HCRESET) {
if (timeout-- <= 0) {
printf("USB RootHub reset timed out!");
break;
@@ -1674,11 +1667,11 @@
} else
printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO);
#endif
- if (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
- /* SMM owns the HC */
- writel(OHCI_OCR, &ohci->regs->cmdstatus);/* request ownership */
+ if (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
+ /* SMM owns the HC, request ownership */
+ ohci_writel(OHCI_OCR, &ohci->regs->cmdstatus);
info("USB HC TakeOver from SMM");
- while (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
+ while (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
wait_ms(10);
if (--smm_timeout == 0) {
err("USB HC TakeOver failed!");
@@ -1688,19 +1681,19 @@
}
/* Disable HC interrupts */
- writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
+ ohci_writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n",
ohci->slot_name,
- readl(&ohci->regs->control));
+ ohci_readl(&ohci->regs->control));
/* Reset USB (needed by some controllers) */
ohci->hc_control = 0;
- writel(ohci->hc_control, &ohci->regs->control);
+ ohci_writel(ohci->hc_control, &ohci->regs->control);
/* HC Reset requires max 10 us delay */
- writel(OHCI_HCR, &ohci->regs->cmdstatus);
- while ((readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+ ohci_writel(OHCI_HCR, &ohci->regs->cmdstatus);
+ while ((ohci_readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
if (--timeout == 0) {
err("USB HC reset timed out!");
return -1;
@@ -1726,39 +1719,40 @@
/* Tell the controller where the control and bulk lists are
* The lists are empty now. */
- writel(0, &ohci->regs->ed_controlhead);
- writel(0, &ohci->regs->ed_bulkhead);
+ ohci_writel(0, &ohci->regs->ed_controlhead);
+ ohci_writel(0, &ohci->regs->ed_bulkhead);
- writel((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+ ohci_writel((__u32)ohci->hcca,
+ &ohci->regs->hcca); /* reset clears this */
fminterval = 0x2edf;
- writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
+ ohci_writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
- writel(fminterval, &ohci->regs->fminterval);
- writel(0x628, &ohci->regs->lsthresh);
+ ohci_writel(fminterval, &ohci->regs->fminterval);
+ ohci_writel(0x628, &ohci->regs->lsthresh);
/* start controller operations */
ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
ohci->disabled = 0;
- writel(ohci->hc_control, &ohci->regs->control);
+ ohci_writel(ohci->hc_control, &ohci->regs->control);
/* disable all interrupts */
mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
OHCI_INTR_OC | OHCI_INTR_MIE);
- writel(mask, &ohci->regs->intrdisable);
+ ohci_writel(mask, &ohci->regs->intrdisable);
/* clear all interrupts */
mask &= ~OHCI_INTR_MIE;
- writel(mask, &ohci->regs->intrstatus);
+ ohci_writel(mask, &ohci->regs->intrstatus);
/* Choose the interrupts we care about now - but w/o MIE */
mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
- writel(mask, &ohci->regs->intrenable);
+ ohci_writel(mask, &ohci->regs->intrenable);
#ifdef OHCI_USE_NPS
/* required for AMD-756 and some Mac platforms */
- writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
+ ohci_writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
&ohci->regs->roothub.a);
- writel(RH_HS_LPSC, &ohci->regs->roothub.status);
+ ohci_writel(RH_HS_LPSC, &ohci->regs->roothub.status);
#endif /* OHCI_USE_NPS */
#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); })
@@ -1792,13 +1786,13 @@
!(m32_swap(ohci->hcca->done_head) & 0x01)) {
ints = OHCI_INTR_WDH;
} else {
- ints = readl(®s->intrstatus);
+ ints = ohci_readl(®s->intrstatus);
if (ints == ~(u32)0) {
ohci->disabled++;
err("%s device removed!", ohci->slot_name);
return -1;
} else {
- ints &= readl(®s->intrenable);
+ ints &= ohci_readl(®s->intrenable);
if (ints == 0) {
dbg("hc_interrupt: returning..\n");
return 0xff;
@@ -1833,16 +1827,16 @@
if (ints & OHCI_INTR_WDH) {
wait_ms(1);
- writel(OHCI_INTR_WDH, ®s->intrdisable);
- (void)readl(®s->intrdisable); /* flush */
+ ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
+ (void)ohci_readl(®s->intrdisable); /* flush */
stat = dl_done_list(&gohci);
- writel(OHCI_INTR_WDH, ®s->intrenable);
- (void)readl(®s->intrdisable); /* flush */
+ ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
+ (void)ohci_readl(®s->intrdisable); /* flush */
}
if (ints & OHCI_INTR_SO) {
dbg("USB Schedule overrun\n");
- writel(OHCI_INTR_SO, ®s->intrenable);
+ ohci_writel(OHCI_INTR_SO, ®s->intrenable);
stat = -1;
}
@@ -1850,13 +1844,13 @@
if (ints & OHCI_INTR_SF) {
unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
wait_ms(1);
- writel(OHCI_INTR_SF, ®s->intrdisable);
+ ohci_writel(OHCI_INTR_SF, ®s->intrdisable);
if (ohci->ed_rm_list[frame] != NULL)
- writel(OHCI_INTR_SF, ®s->intrenable);
+ ohci_writel(OHCI_INTR_SF, ®s->intrenable);
stat = 0xff;
}
- writel(ints, ®s->intrstatus);
+ ohci_writel(ints, ®s->intrstatus);
return stat;
}
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 79aa79d..d977e8f 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -7,6 +7,17 @@
* usb-ohci.h
*/
+/*
+ * e.g. PCI controllers need this
+ */
+#ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
+# define ohci_readl(a) __swap_32(*((volatile u32 *)(a)))
+# define ohci_writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
+#else
+# define ohci_readl(a) (*((volatile u32 *)(a)))
+# define ohci_writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
+#endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
+
/* functions for doing board or CPU specific setup/cleanup */
extern int usb_board_init(void);
extern int usb_board_stop(void);
@@ -196,8 +207,8 @@
/*
* This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
+ * region. This is Memory Mapped I/O. You must use the ohci_readl() and
+ * ohci_writel() macros defined in this file to access these!!
*/
struct ohci_regs {
/* control and status registers */