imx: imx8mn-beacon: Fix out of spec voltage
The DDR is configured for LPDDR4 running at 1.6GHz which requires
the voltage on the PMIC to rise a bit before initializing LPDDR4
or it will be running out of spec.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
diff --git a/board/beacon/imx8mn/spl.c b/board/beacon/imx8mn/spl.c
index 029f71b..9acd916 100644
--- a/board/beacon/imx8mn/spl.c
+++ b/board/beacon/imx8mn/spl.c
@@ -74,6 +74,38 @@
IMX8MN_PAD_GPIO1_IO01__PWM1_OUT | MUX_PAD_CTRL(PWM1_PAD_CTRL),
};
+static int power_init_board(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = pmic_get("pmic@4b", &dev);
+ if (ret == -ENODEV) {
+ puts("No pmic\n");
+ return 0;
+ }
+
+ if (ret != 0)
+ return ret;
+
+ /* decrease RESET key long push time from the default 10s to 10ms */
+ pmic_reg_write(dev, BD718XX_PWRONCONFIG1, 0x0);
+
+ /* unlock the PMIC regs */
+ pmic_reg_write(dev, BD718XX_REGLOCK, 0x1);
+
+ /* increase VDD_SOC to typical value 0.85v before first DRAM access */
+ pmic_reg_write(dev, BD718XX_BUCK1_VOLT_RUN, 0x0f);
+
+ /* increase VDD_DRAM to 0.975v for 3Ghz DDR */
+ pmic_reg_write(dev, BD718XX_1ST_NODVS_BUCK_VOLT, 0x83);
+
+ /* lock the PMIC regs */
+ pmic_reg_write(dev, BD718XX_REGLOCK, 0x11);
+
+ return 0;
+}
+
int board_early_init_f(void)
{
/* Claiming pwm pins prevents LCD flicker during startup*/
@@ -107,6 +139,9 @@
enable_tzc380();
+ /* LPDDR4 at 1.6GHz requires a voltage adjustment on the PMIC */
+ power_init_board();
+
/* DDR initialization */
spl_dram_init();