arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5
There have been a few updates including flexspi, so it's necessary
to re-sync.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/imx8mn.dtsi b/arch/arm/dts/imx8mn.dtsi
index ee17902..16ea500 100644
--- a/arch/arm/dts/imx8mn.dtsi
+++ b/arch/arm/dts/imx8mn.dtsi
@@ -241,10 +241,12 @@
};
soc@0 {
- compatible = "simple-bus";
+ compatible = "fsl,imx8mn-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ nvmem-cells = <&imx8mn_uid>;
+ nvmem-cell-names = "soc_unique_id";
aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@@ -253,7 +255,7 @@
#size-cells = <1>;
ranges;
- spba: bus@30000000 {
+ spba: spba-bus@30000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -531,9 +533,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ imx8mn_uid: unique-id@410 {
+ reg = <0x4 0x8>;
+ };
+
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
+
+ fec_mac_address: mac-address@90 {
+ reg = <0x90 6>;
+ };
};
anatop: anatop@30360000 {
@@ -581,7 +591,9 @@
<&clk IMX8MN_CLK_NOC>,
<&clk IMX8MN_CLK_AUDIO_AHB>,
<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
- <&clk IMX8MN_SYS_PLL3>;
+ <&clk IMX8MN_SYS_PLL3>,
+ <&clk IMX8MN_AUDIO_PLL1>,
+ <&clk IMX8MN_AUDIO_PLL2>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
<&clk IMX8MN_ARM_PLL_OUT>,
<&clk IMX8MN_SYS_PLL3_OUT>,
@@ -589,7 +601,9 @@
assigned-clock-rates = <0>, <0>, <0>,
<400000000>,
<400000000>,
- <600000000>;
+ <600000000>,
+ <393216000>,
+ <361267200>;
};
src: reset-controller@30390000 {
@@ -875,6 +889,19 @@
status = "disabled";
};
+ flexspi: spi@30bb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
+ <&clk IMX8MN_CLK_QSPI_ROOT>;
+ clock-names = "fspi", "fspi_en";
+ status = "disabled";
+ };
+
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
@@ -903,13 +930,18 @@
assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
<&clk IMX8MN_CLK_ENET_TIMER>,
<&clk IMX8MN_CLK_ENET_REF>,
- <&clk IMX8MN_CLK_ENET_TIMER>;
+ <&clk IMX8MN_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
<&clk IMX8MN_SYS_PLL2_100M>,
- <&clk IMX8MN_SYS_PLL2_125M>;
- assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+ <&clk IMX8MN_SYS_PLL2_125M>,
+ <&clk IMX8MN_SYS_PLL2_50M>;
+ assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ nvmem-cells = <&fec_mac_address>;
+ nvmem-cell-names = "mac-address";
+ nvmem_macaddr_swap;
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};