Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
diff --git a/board/xm250/flash.c b/board/xm250/flash.c
index b02149c..e825aba 100644
--- a/board/xm250/flash.c
+++ b/board/xm250/flash.c
@@ -250,7 +250,7 @@
 int flash_erase (flash_info_t *info, int s_first, int s_last)
 {
 	int flag, prot, sect;
-	ulong type, start, last;
+	ulong type, start;
 	int rcode = 0;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -283,9 +283,6 @@
 		printf ("\n");
 	}
 
-	start = get_timer (0);
-	last = start;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts ();
 
@@ -298,14 +295,14 @@
 			printf ("Erasing sector %2d ... ", sect);
 
 			/* arm simple, non interrupt dependent timer */
-			reset_timer_masked ();
+			start = get_timer(0);
 
 			*addr = (FPW) 0x00500050;	/* clear status register */
 			*addr = (FPW) 0x00200020;	/* erase setup */
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
+				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -422,6 +419,7 @@
 	FPWV *addr = (FPWV *) dest;
 	ulong status;
 	int flag;
+	ulong start;
 
 	/* Check if Flash is (sufficiently) erased */
 	if ((*addr & data) != data) {
@@ -435,11 +433,11 @@
 	*addr = data;
 
 	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked ();
+	start = get_timer(0);
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
@@ -470,6 +468,7 @@
 	int rc = 0;
 	vu_long *addr = (vu_long *)(info->start[sector]);
 	int flag = disable_interrupts();
+	ulong start;
 
 	*addr = INTEL_CLEAR;	/* Clear status register */
 	if (prot) {			/* Set sector lock bit */
@@ -481,10 +480,10 @@
 		*addr = INTEL_CONFIRM;	/* clear */
 	}
 
-	reset_timer_masked ();
+	start = get_timer(0);
 
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 			printf("Flash lock bit operation timed out\n");
 			rc = 1;
 			break;
@@ -510,13 +509,13 @@
 		{
 			if (info->protect[i])
 			{
-				reset_timer_masked ();
+				start = get_timer(0);
 				addr = (vu_long *)(info->start[i]);
 				*addr = INTEL_LOCKBIT;	/* Sector lock bit */
 				*addr = INTEL_PROTECT;	/* set */
 				while ((*addr & INTEL_FINISHED) != INTEL_FINISHED)
 				{
-					if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT)
+					if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT)
 					{
 						printf("Flash lock bit operation timed out\n");
 						rc = 1;