fdt: Add several apis to decode pci device node
This commit adds several APIs to decode PCI device node according to
the Open Firmware PCI bus bindings, including:
- fdtdec_get_pci_addr() for encoded pci address
- fdtdec_get_pci_vendev() for vendor id and device id
- fdtdec_get_pci_bdf() for pci device bdf triplet
- fdtdec_get_pci_bar32() for pci device register bar
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Include <pci.h> in fdtdec.h and adjust tegra to fix build error)
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 5effa24..75af750 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -15,6 +15,7 @@
*/
#include <libfdt.h>
+#include <pci.h>
/*
* A typedef for a physical address. Note that fdt data is always big
@@ -50,6 +51,49 @@
fdt_addr_t end;
};
+enum fdt_pci_space {
+ FDT_PCI_SPACE_CONFIG = 0,
+ FDT_PCI_SPACE_IO = 0x01000000,
+ FDT_PCI_SPACE_MEM32 = 0x02000000,
+ FDT_PCI_SPACE_MEM64 = 0x03000000,
+ FDT_PCI_SPACE_MEM32_PREF = 0x42000000,
+ FDT_PCI_SPACE_MEM64_PREF = 0x43000000,
+};
+
+#define FDT_PCI_ADDR_CELLS 3
+#define FDT_PCI_SIZE_CELLS 2
+#define FDT_PCI_REG_SIZE \
+ ((FDT_PCI_ADDR_CELLS + FDT_PCI_SIZE_CELLS) * sizeof(u32))
+
+/*
+ * The Open Firmware spec defines PCI physical address as follows:
+ *
+ * bits# 31 .... 24 23 .... 16 15 .... 08 07 .... 00
+ *
+ * phys.hi cell: npt000ss bbbbbbbb dddddfff rrrrrrrr
+ * phys.mid cell: hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh
+ * phys.lo cell: llllllll llllllll llllllll llllllll
+ *
+ * where:
+ *
+ * n: is 0 if the address is relocatable, 1 otherwise
+ * p: is 1 if addressable region is prefetchable, 0 otherwise
+ * t: is 1 if the address is aliased (for non-relocatable I/O) below 1MB
+ * (for Memory), or below 64KB (for relocatable I/O)
+ * ss: is the space code, denoting the address space
+ * bbbbbbbb: is the 8-bit Bus Number
+ * ddddd: is the 5-bit Device Number
+ * fff: is the 3-bit Function Number
+ * rrrrrrrr: is the 8-bit Register Number
+ * hhhhhhhh: is a 32-bit unsigned number
+ * llllllll: is a 32-bit unsigned number
+ */
+struct fdt_pci_addr {
+ u32 phys_hi;
+ u32 phys_mid;
+ u32 phys_lo;
+};
+
/**
* Compute the size of a resource.
*
@@ -258,6 +302,60 @@
const char *prop_name, fdt_size_t *sizep);
/**
+ * Look at an address property in a node and return the pci address which
+ * corresponds to the given type in the form of fdt_pci_addr.
+ * The property must hold one fdt_pci_addr with a lengh.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param type pci address type (FDT_PCI_SPACE_xxx)
+ * @param prop_name name of property to find
+ * @param addr returns pci address in the form of fdt_pci_addr
+ * @return 0 if ok, negative on error
+ */
+int fdtdec_get_pci_addr(const void *blob, int node, enum fdt_pci_space type,
+ const char *prop_name, struct fdt_pci_addr *addr);
+
+/**
+ * Look at the compatible property of a device node that represents a PCI
+ * device and extract pci vendor id and device id from it.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param vendor vendor id of the pci device
+ * @param device device id of the pci device
+ * @return 0 if ok, negative on error
+ */
+int fdtdec_get_pci_vendev(const void *blob, int node,
+ u16 *vendor, u16 *device);
+
+/**
+ * Look at the pci address of a device node that represents a PCI device
+ * and parse the bus, device and function number from it.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param addr pci address in the form of fdt_pci_addr
+ * @param bdf returns bus, device, function triplet
+ * @return 0 if ok, negative on error
+ */
+int fdtdec_get_pci_bdf(const void *blob, int node,
+ struct fdt_pci_addr *addr, pci_dev_t *bdf);
+
+/**
+ * Look at the pci address of a device node that represents a PCI device
+ * and return base address of the pci device's registers.
+ *
+ * @param blob FDT blob
+ * @param node node to examine
+ * @param addr pci address in the form of fdt_pci_addr
+ * @param bar returns base address of the pci device's registers
+ * @return 0 if ok, negative on error
+ */
+int fdtdec_get_pci_bar32(const void *blob, int node,
+ struct fdt_pci_addr *addr, u32 *bar);
+
+/**
* Look up a 32-bit integer property in a node and return it. The property
* must have at least 4 bytes of data. The value of the first cell is
* returned.
@@ -683,17 +781,6 @@
struct fdt_resource *res);
/**
- * Look at the reg property of a device node that represents a PCI device
- * and parse the bus, device and function number from it.
- *
- * @param fdt FDT blob
- * @param node node to examine
- * @param bdf returns bus, device, function triplet
- * @return 0 if ok, negative on error
- */
-int fdtdec_pci_get_bdf(const void *fdt, int node, int *bdf);
-
-/**
* Decode a named region within a memory bank of a given type.
*
* This function handles selection of a memory region. The region is