imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linux
Synchronise device tree with linux v5.19-rc5.
Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Verdin Development (carrier) board (e.g.
imx8mm-verdin-wifi-dev.dtb rather than the previous imx8mm-verdin.dtb).
Please further note that the PMIC node name got changed from a pmic
label to pmic@25 which required adjustment in resp. board SPL file
board/toradex/verdin-imx8mm/spl.c.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/arch/arm/dts/imx8mm-verdin-dahlia.dtsi b/arch/arm/dts/imx8mm-verdin-dahlia.dtsi
new file mode 100644
index 0000000..c2a5c2f
--- /dev/null
+++ b/arch/arm/dts/imx8mm-verdin-dahlia.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+ sound_card: sound-card {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,name = "imx8mm-wm8904";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "Headphone Jack", "MICBIAS",
+ "IN1L", "Headphone Jack";
+ simple-audio-card,widgets =
+ "Microphone", "Headphone Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack";
+
+ dailink_master: simple-audio-card,codec {
+ clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+ sound-dai = <&wm8904_1a>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+ };
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+ status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+ status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+ status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+ status = "okay";
+};
+
+&hwmon_temp {
+ vs-supply = <®_1p8v>;
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+ status = "okay";
+
+ /* Audio Codec */
+ wm8904_1a: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ AVDD-supply = <®_3p3v>;
+ clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+ clock-names = "mclk";
+ CPVDD-supply = <®_3p3v>;
+ DBVDD-supply = <®_3p3v>;
+ DCVDD-supply = <®_3p3v>;
+ MICVDD-supply = <®_3p3v>;
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+ status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+ status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+ status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+ status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+ status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+ status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+ status = "okay";
+};