SPEAr : smi driver support for SPEAr SoCs
SPEAr SoCs contain a serial memory interface controller. This
controller is used to interface with spi based memories.
This patch adds the driver for this IP.
Signed-off-by: Vipin <vipin.kumar@st.com>
diff --git a/include/asm-arm/arch-spear/spr_smi.h b/include/asm-arm/arch-spear/spr_smi.h
new file mode 100755
index 0000000..06df745
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_smi.h
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef SPR_SMI_H
+#define SPR_SMI_H
+
+/* 0xF800.0000 . 0xFBFF.FFFF 64MB SMI (Serial Flash Mem) */
+/* 0xFC00.0000 . 0xFC1F.FFFF 2MB SMI (Serial Flash Reg.) */
+
+#define FLASH_START_ADDRESS CONFIG_SYS_FLASH_BASE
+#define FLASH_BANK_SIZE CONFIG_SYS_FLASH_BANK_SIZE
+
+#define SMIBANK0_BASE (FLASH_START_ADDRESS)
+#define SMIBANK1_BASE (SMIBANK0_BASE + FLASH_BANK_SIZE)
+#define SMIBANK2_BASE (SMIBANK1_BASE + FLASH_BANK_SIZE)
+#define SMIBANK3_BASE (SMIBANK2_BASE + FLASH_BANK_SIZE)
+
+#define BANK0 0
+#define BANK1 1
+#define BANK2 2
+#define BANK3 3
+
+struct smi_regs {
+ u32 smi_cr1;
+ u32 smi_cr2;
+ u32 smi_sr;
+ u32 smi_tr;
+ u32 smi_rr;
+};
+
+/* CONTROL REG 1 */
+#define BANK_EN 0x0000000F /* enables all banks */
+#define DSEL_TIME 0x00000060 /* Deselect time */
+#define PRESCAL5 0x00000500 /* AHB_CK prescaling value */
+#define PRESCALA 0x00000A00 /* AHB_CK prescaling value */
+#define PRESCAL3 0x00000300 /* AHB_CK prescaling value */
+#define PRESCAL4 0x00000400 /* AHB_CK prescaling value */
+#define SW_MODE 0x10000000 /* enables SW Mode */
+#define WB_MODE 0x20000000 /* Write Burst Mode */
+#define FAST_MODE 0x00008000 /* Fast Mode */
+#define HOLD1 0x00010000
+
+/* CONTROL REG 2 */
+#define RD_STATUS_REG 0x00000400 /* reads status reg */
+#define WE 0x00000800 /* Write Enable */
+#define BANK0_SEL 0x00000000 /* Select Banck0 */
+#define BANK1_SEL 0x00001000 /* Select Banck1 */
+#define BANK2_SEL 0x00002000 /* Select Banck2 */
+#define BANK3_SEL 0x00003000 /* Select Banck3 */
+#define BANKSEL_SHIFT 12
+#define SEND 0x00000080 /* Send data */
+#define TX_LEN_1 0x00000001 /* data length = 1 byte */
+#define TX_LEN_2 0x00000002 /* data length = 2 byte */
+#define TX_LEN_3 0x00000003 /* data length = 3 byte */
+#define TX_LEN_4 0x00000004 /* data length = 4 byte */
+#define RX_LEN_1 0x00000010 /* data length = 1 byte */
+#define RX_LEN_2 0x00000020 /* data length = 2 byte */
+#define RX_LEN_3 0x00000030 /* data length = 3 byte */
+#define RX_LEN_4 0x00000040 /* data length = 4 byte */
+#define TFIE 0x00000100 /* Tx Flag Interrupt Enable */
+#define WCIE 0x00000200 /* WCF Interrupt Enable */
+
+/* STATUS_REG */
+#define INT_WCF_CLR 0xFFFFFDFF /* clear: WCF clear */
+#define INT_TFF_CLR 0xFFFFFEFF /* clear: TFF clear */
+#define WIP_BIT 0x00000001 /* WIP Bit of SPI SR */
+#define WEL_BIT 0x00000002 /* WEL Bit of SPI SR */
+#define RSR 0x00000005 /* Read Status regiser */
+#define TFF 0x00000100 /* Transfer Finished FLag */
+#define WCF 0x00000200 /* Transfer Finished FLag */
+#define ERF1 0x00000400 /* Error Flag 1 */
+#define ERF2 0x00000800 /* Error Flag 2 */
+#define WM0 0x00001000 /* WM Bank 0 */
+#define WM1 0x00002000 /* WM Bank 1 */
+#define WM2 0x00004000 /* WM Bank 2 */
+#define WM3 0x00008000 /* WM Bank 3 */
+#define WM_SHIFT 12
+
+/* TR REG */
+#define READ_ID 0x0000009F /* Read Identification */
+#define BULK_ERASE 0x000000C7 /* BULK erase */
+#define SECTOR_ERASE 0x000000D8 /* SECTOR erase */
+#define WRITE_ENABLE 0x00000006 /* Wenable command to FLASH */
+
+struct flash_dev {
+ u32 density;
+ ulong size;
+ ushort sector_count;
+};
+
+#define SFLASH_PAGE_SIZE 0x100 /* flash page size */
+#define XFER_FINISH_TOUT 2 /* xfer finish timeout */
+#define WMODE_TOUT 2 /* write enable timeout */
+
+#endif